From 8310c09541833f8a5d7f580830f63989a9789257 Mon Sep 17 00:00:00 2001 From: Andriy Tryshnivskyy Date: Mon, 4 Oct 2021 21:05:23 +0300 Subject: virtualization/linux-yocto: Add SCMIv3.0 Sensor Extensions patches. IIO SCMI driver assumes that those changes are present. It fails to compile without them. Bug-AGL: SPEC-3865 Signed-off-by: Andriy Tryshnivskyy Change-Id: Ia0011b5b621fc08321a1d74f3ae00e2780f3188a --- ...rm_scmi-rework-scmi_sensors_protocol_init.patch | 69 ++ ...m_scmi-add-SCMIv3.0-Sensors-descriptors-e.patch | 733 +++++++++++++++++++++ ...cmi-update-hwmon-internal-scale-data-type.patch | 30 + ...m_scmi-add-SCMIv3.0-Sensors-timestamped-r.patch | 236 +++++++ ...m_scmi-add-SCMIv3.0-Sensor-configuration-.patch | 172 +++++ ...rm_scmi-add-SCMIv3.0-Sensor-notifications.patch | 234 +++++++ .../recipes-kernel/linux/linux-yocto_%.bbappend | 10 + 7 files changed, 1484 insertions(+) create mode 100644 meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0001-firmware-arm_scmi-rework-scmi_sensors_protocol_init.patch create mode 100644 meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0002-firmware-arm_scmi-add-SCMIv3.0-Sensors-descriptors-e.patch create mode 100644 meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0003-hwmon-scmi-update-hwmon-internal-scale-data-type.patch create mode 100644 meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0004-firmware-arm_scmi-add-SCMIv3.0-Sensors-timestamped-r.patch create mode 100644 meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0005-firmware-arm_scmi-add-SCMIv3.0-Sensor-configuration-.patch create mode 100644 meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0006-firmware-arm_scmi-add-SCMIv3.0-Sensor-notifications.patch (limited to 'meta-egvirt') diff --git a/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0001-firmware-arm_scmi-rework-scmi_sensors_protocol_init.patch b/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0001-firmware-arm_scmi-rework-scmi_sensors_protocol_init.patch new file mode 100644 index 00000000..02024d11 --- /dev/null +++ b/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0001-firmware-arm_scmi-rework-scmi_sensors_protocol_init.patch @@ -0,0 +1,69 @@ +From d9d8732bdf07755780f37cf083ead8b61ee3c95d Mon Sep 17 00:00:00 2001 +From: Cristian Marussi +Date: Thu, 19 Nov 2020 17:49:01 +0000 +Subject: [PATCH] firmware: arm_scmi: rework scmi_sensors_protocol_init + +Properly handle return values from initialization helpers and avoid +setting sensor_ops before sensor_priv. + +Signed-off-by: Cristian Marussi +Signed-off-by: Vasyl Vavrychuk +--- + drivers/firmware/arm_scmi/sensors.c | 16 ++++++++++------ + 1 file changed, 10 insertions(+), 6 deletions(-) + +diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c +index b4232d611033..6aaff478d032 100644 +--- a/drivers/firmware/arm_scmi/sensors.c ++++ b/drivers/firmware/arm_scmi/sensors.c +@@ -2,7 +2,7 @@ + /* + * System Control and Management Interface (SCMI) Sensor Protocol + * +- * Copyright (C) 2018 ARM Ltd. ++ * Copyright (C) 2018-2020 ARM Ltd. + */ + + #define pr_fmt(fmt) "SCMI Notifications SENSOR - " fmt +@@ -334,6 +334,7 @@ static const struct scmi_event_ops sensor_event_ops = { + static int scmi_sensors_protocol_init(struct scmi_handle *handle) + { + u32 version; ++ int ret; + struct sensors_info *sinfo; + + scmi_version_get(handle, SCMI_PROTOCOL_SENSOR, &version); +@@ -344,15 +345,19 @@ static int scmi_sensors_protocol_init(struct scmi_handle *handle) + sinfo = devm_kzalloc(handle->dev, sizeof(*sinfo), GFP_KERNEL); + if (!sinfo) + return -ENOMEM; ++ sinfo->version = version; + +- scmi_sensor_attributes_get(handle, sinfo); +- ++ ret = scmi_sensor_attributes_get(handle, sinfo); ++ if (ret) ++ return ret; + sinfo->sensors = devm_kcalloc(handle->dev, sinfo->num_sensors, + sizeof(*sinfo->sensors), GFP_KERNEL); + if (!sinfo->sensors) + return -ENOMEM; + +- scmi_sensor_description_get(handle, sinfo); ++ ret = scmi_sensor_description_get(handle, sinfo); ++ if (ret) ++ return ret; + + scmi_register_protocol_events(handle, + SCMI_PROTOCOL_SENSOR, SCMI_PROTO_QUEUE_SZ, +@@ -360,9 +365,8 @@ static int scmi_sensors_protocol_init(struct scmi_handle *handle) + ARRAY_SIZE(sensor_events), + sinfo->num_sensors); + +- sinfo->version = version; +- handle->sensor_ops = &sensor_ops; + handle->sensor_priv = sinfo; ++ handle->sensor_ops = &sensor_ops; + + return 0; + } diff --git a/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0002-firmware-arm_scmi-add-SCMIv3.0-Sensors-descriptors-e.patch b/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0002-firmware-arm_scmi-add-SCMIv3.0-Sensors-descriptors-e.patch new file mode 100644 index 00000000..8a4e3ded --- /dev/null +++ b/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0002-firmware-arm_scmi-add-SCMIv3.0-Sensors-descriptors-e.patch @@ -0,0 +1,733 @@ +From 994102ee967232e7565887d2a5fb83384b550bd8 Mon Sep 17 00:00:00 2001 +From: Cristian Marussi +Date: Thu, 19 Nov 2020 17:49:02 +0000 +Subject: [PATCH] firmware: arm_scmi: add SCMIv3.0 Sensors descriptors + extensions + +Add support for new SCMIv3.0 Sensors extensions related to new sensors' +features, like multiple axis and update intervals, while keeping +compatibility with SCMIv2.0 features. +While at that, refactor and simplify all the internal helpers macros and +move struct scmi_sensor_info to use only non-fixed-size typing. + +Signed-off-by: Cristian Marussi +Signed-off-by: Vasyl Vavrychuk +--- + drivers/firmware/arm_scmi/sensors.c | 390 ++++++++++++++++++++++++++-- + include/linux/scmi_protocol.h | 220 +++++++++++++++- + 2 files changed, 585 insertions(+), 25 deletions(-) + +diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c +index 6aaff478d032..a85827f60a02 100644 +--- a/drivers/firmware/arm_scmi/sensors.c ++++ b/drivers/firmware/arm_scmi/sensors.c +@@ -7,16 +7,22 @@ + + #define pr_fmt(fmt) "SCMI Notifications SENSOR - " fmt + ++#include + #include + + #include "common.h" + #include "notify.h" + ++#define SCMI_MAX_NUM_SENSOR_AXIS 63 ++#define SCMIv2_SENSOR_PROTOCOL 0x10000 ++ + enum scmi_sensor_protocol_cmd { + SENSOR_DESCRIPTION_GET = 0x3, + SENSOR_TRIP_POINT_NOTIFY = 0x4, + SENSOR_TRIP_POINT_CONFIG = 0x5, + SENSOR_READING_GET = 0x6, ++ SENSOR_AXIS_DESCRIPTION_GET = 0x7, ++ SENSOR_LIST_UPDATE_INTERVALS = 0x8, + }; + + struct scmi_msg_resp_sensor_attributes { +@@ -28,23 +34,100 @@ struct scmi_msg_resp_sensor_attributes { + __le32 reg_size; + }; + ++/* v3 attributes_low macros */ ++#define SUPPORTS_UPDATE_NOTIFY(x) FIELD_GET(BIT(30), (x)) ++#define SENSOR_TSTAMP_EXP(x) FIELD_GET(GENMASK(14, 10), (x)) ++#define SUPPORTS_TIMESTAMP(x) FIELD_GET(BIT(9), (x)) ++#define SUPPORTS_EXTEND_ATTRS(x) FIELD_GET(BIT(8), (x)) ++ ++/* v2 attributes_high macros */ ++#define SENSOR_UPDATE_BASE(x) FIELD_GET(GENMASK(31, 27), (x)) ++#define SENSOR_UPDATE_SCALE(x) FIELD_GET(GENMASK(26, 22), (x)) ++ ++/* v3 attributes_high macros */ ++#define SENSOR_AXIS_NUMBER(x) FIELD_GET(GENMASK(21, 16), (x)) ++#define SUPPORTS_AXIS(x) FIELD_GET(BIT(8), (x)) ++ ++/* v3 resolution macros */ ++#define SENSOR_RES(x) FIELD_GET(GENMASK(26, 0), (x)) ++#define SENSOR_RES_EXP(x) FIELD_GET(GENMASK(31, 27), (x)) ++ ++struct scmi_msg_resp_attrs { ++ __le32 min_range_low; ++ __le32 min_range_high; ++ __le32 max_range_low; ++ __le32 max_range_high; ++}; ++ + struct scmi_msg_resp_sensor_description { + __le16 num_returned; + __le16 num_remaining; +- struct { ++ struct scmi_sensor_descriptor { ++ __le32 id; ++ __le32 attributes_low; ++/* Common attributes_low macros */ ++#define SUPPORTS_ASYNC_READ(x) FIELD_GET(BIT(31), (x)) ++#define NUM_TRIP_POINTS(x) FIELD_GET(GENMASK(7, 0), (x)) ++ __le32 attributes_high; ++/* Common attributes_high macros */ ++#define SENSOR_SCALE(x) FIELD_GET(GENMASK(15, 11), (x)) ++#define SENSOR_SCALE_SIGN BIT(4) ++#define SENSOR_SCALE_EXTEND GENMASK(31, 5) ++#define SENSOR_TYPE(x) FIELD_GET(GENMASK(7, 0), (x)) ++ u8 name[SCMI_MAX_STR_SIZE]; ++ /* only for version > 2.0 */ ++ __le32 power; ++ __le32 resolution; ++ struct scmi_msg_resp_attrs scalar_attrs; ++ } desc[]; ++}; ++ ++/* Base scmi_sensor_descriptor size excluding extended attrs after name */ ++#define SCMI_MSG_RESP_SENS_DESCR_BASE_SZ 28 ++ ++/* Sign extend to a full s32 */ ++#define S32_EXT(v) \ ++ ({ \ ++ int __v = (v); \ ++ \ ++ if (__v & SENSOR_SCALE_SIGN) \ ++ __v |= SENSOR_SCALE_EXTEND; \ ++ __v; \ ++ }) ++ ++struct scmi_msg_sensor_axis_description_get { ++ __le32 id; ++ __le32 axis_desc_index; ++}; ++ ++struct scmi_msg_resp_sensor_axis_description { ++ __le32 num_axis_flags; ++#define NUM_AXIS_RETURNED(x) FIELD_GET(GENMASK(5, 0), (x)) ++#define NUM_AXIS_REMAINING(x) FIELD_GET(GENMASK(31, 26), (x)) ++ struct scmi_axis_descriptor { + __le32 id; + __le32 attributes_low; +-#define SUPPORTS_ASYNC_READ(x) ((x) & BIT(31)) +-#define NUM_TRIP_POINTS(x) ((x) & 0xff) + __le32 attributes_high; +-#define SENSOR_TYPE(x) ((x) & 0xff) +-#define SENSOR_SCALE(x) (((x) >> 11) & 0x1f) +-#define SENSOR_SCALE_SIGN BIT(4) +-#define SENSOR_SCALE_EXTEND GENMASK(7, 5) +-#define SENSOR_UPDATE_SCALE(x) (((x) >> 22) & 0x1f) +-#define SENSOR_UPDATE_BASE(x) (((x) >> 27) & 0x1f) +- u8 name[SCMI_MAX_STR_SIZE]; +- } desc[0]; ++ u8 name[SCMI_MAX_STR_SIZE]; ++ __le32 resolution; ++ struct scmi_msg_resp_attrs attrs; ++ } desc[]; ++}; ++ ++/* Base scmi_axis_descriptor size excluding extended attrs after name */ ++#define SCMI_MSG_RESP_AXIS_DESCR_BASE_SZ 28 ++ ++struct scmi_msg_sensor_list_update_intervals { ++ __le32 id; ++ __le32 index; ++}; ++ ++struct scmi_msg_resp_sensor_list_update_intervals { ++ __le32 num_intervals_flags; ++#define NUM_INTERVALS_RETURNED(x) FIELD_GET(GENMASK(11, 0), (x)) ++#define SEGMENTED_INTVL_FORMAT(x) FIELD_GET(BIT(12), (x)) ++#define NUM_INTERVALS_REMAINING(x) FIELD_GET(GENMASK(31, 16), (x)) ++ __le32 intervals[]; + }; + + struct scmi_msg_sensor_trip_point_notify { +@@ -114,6 +197,194 @@ static int scmi_sensor_attributes_get(const struct scmi_handle *handle, + return ret; + } + ++static inline void scmi_parse_range_attrs(struct scmi_range_attrs *out, ++ struct scmi_msg_resp_attrs *in) ++{ ++ out->min_range = get_unaligned_le64((void *)&in->min_range_low); ++ out->max_range = get_unaligned_le64((void *)&in->max_range_low); ++} ++ ++static int scmi_sensor_update_intervals(const struct scmi_handle *handle, ++ struct scmi_sensor_info *s) ++{ ++ int ret, cnt; ++ u32 desc_index = 0; ++ u16 num_returned, num_remaining; ++ struct scmi_xfer *ti; ++ struct scmi_msg_resp_sensor_list_update_intervals *buf; ++ struct scmi_msg_sensor_list_update_intervals *msg; ++ ++ ret = scmi_xfer_get_init(handle, SENSOR_LIST_UPDATE_INTERVALS, ++ SCMI_PROTOCOL_SENSOR, sizeof(*msg), 0, &ti); ++ if (ret) ++ return ret; ++ ++ buf = ti->rx.buf; ++ do { ++ u32 flags; ++ ++ msg = ti->tx.buf; ++ /* Set the number of sensors to be skipped/already read */ ++ msg->id = cpu_to_le32(s->id); ++ msg->index = cpu_to_le32(desc_index); ++ ++ ret = scmi_do_xfer(handle, ti); ++ if (ret) ++ break; ++ ++ flags = le32_to_cpu(buf->num_intervals_flags); ++ num_returned = NUM_INTERVALS_RETURNED(flags); ++ num_remaining = NUM_INTERVALS_REMAINING(flags); ++ ++ /* ++ * Max intervals is not declared previously anywhere so we ++ * assume it's returned+remaining. ++ */ ++ if (!s->intervals.count) { ++ s->intervals.segmented = SEGMENTED_INTVL_FORMAT(flags); ++ s->intervals.count = num_returned + num_remaining; ++ /* segmented intervals are reported in one triplet */ ++ if (s->intervals.segmented && ++ (num_remaining || num_returned != 3)) { ++ dev_err(handle->dev, ++ "Sensor ID:%d advertises an invalid segmented interval (%d)\n", ++ s->id, s->intervals.count); ++ s->intervals.segmented = false; ++ s->intervals.count = 0; ++ ret = -EINVAL; ++ break; ++ } ++ /* Direct allocation when exceeding pre-allocated */ ++ if (s->intervals.count >= SCMI_MAX_PREALLOC_POOL) { ++ s->intervals.desc = ++ devm_kcalloc(handle->dev, ++ s->intervals.count, ++ sizeof(*s->intervals.desc), ++ GFP_KERNEL); ++ if (!s->intervals.desc) { ++ s->intervals.segmented = false; ++ s->intervals.count = 0; ++ ret = -ENOMEM; ++ break; ++ } ++ } ++ } else if (desc_index + num_returned > s->intervals.count) { ++ dev_err(handle->dev, ++ "No. of update intervals can't exceed %d\n", ++ s->intervals.count); ++ ret = -EINVAL; ++ break; ++ } ++ ++ for (cnt = 0; cnt < num_returned; cnt++) ++ s->intervals.desc[desc_index + cnt] = ++ le32_to_cpu(buf->intervals[cnt]); ++ ++ desc_index += num_returned; ++ ++ scmi_reset_rx_to_maxsz(handle, ti); ++ /* ++ * check for both returned and remaining to avoid infinite ++ * loop due to buggy firmware ++ */ ++ } while (num_returned && num_remaining); ++ ++ scmi_xfer_put(handle, ti); ++ return ret; ++} ++ ++static int scmi_sensor_axis_description(const struct scmi_handle *handle, ++ struct scmi_sensor_info *s) ++{ ++ int ret, cnt; ++ u32 desc_index = 0; ++ u16 num_returned, num_remaining; ++ struct scmi_xfer *te; ++ struct scmi_msg_resp_sensor_axis_description *buf; ++ struct scmi_msg_sensor_axis_description_get *msg; ++ ++ s->axis = devm_kcalloc(handle->dev, s->num_axis, ++ sizeof(*s->axis), GFP_KERNEL); ++ if (!s->axis) ++ return -ENOMEM; ++ ++ ret = scmi_xfer_get_init(handle, SENSOR_AXIS_DESCRIPTION_GET, ++ SCMI_PROTOCOL_SENSOR, sizeof(*msg), 0, &te); ++ if (ret) ++ return ret; ++ ++ buf = te->rx.buf; ++ do { ++ u32 flags; ++ struct scmi_axis_descriptor *adesc; ++ ++ msg = te->tx.buf; ++ /* Set the number of sensors to be skipped/already read */ ++ msg->id = cpu_to_le32(s->id); ++ msg->axis_desc_index = cpu_to_le32(desc_index); ++ ++ ret = scmi_do_xfer(handle, te); ++ if (ret) ++ break; ++ ++ flags = le32_to_cpu(buf->num_axis_flags); ++ num_returned = NUM_AXIS_RETURNED(flags); ++ num_remaining = NUM_AXIS_REMAINING(flags); ++ ++ if (desc_index + num_returned > s->num_axis) { ++ dev_err(handle->dev, "No. of axis can't exceed %d\n", ++ s->num_axis); ++ break; ++ } ++ ++ adesc = &buf->desc[0]; ++ for (cnt = 0; cnt < num_returned; cnt++) { ++ u32 attrh, attrl; ++ struct scmi_sensor_axis_info *a; ++ size_t dsize = SCMI_MSG_RESP_AXIS_DESCR_BASE_SZ; ++ ++ attrl = le32_to_cpu(adesc->attributes_low); ++ ++ a = &s->axis[desc_index + cnt]; ++ ++ a->id = le32_to_cpu(adesc->id); ++ a->extended_attrs = SUPPORTS_EXTEND_ATTRS(attrl); ++ ++ attrh = le32_to_cpu(adesc->attributes_high); ++ a->scale = S32_EXT(SENSOR_SCALE(attrh)); ++ a->type = SENSOR_TYPE(attrh); ++ strlcpy(a->name, adesc->name, SCMI_MAX_STR_SIZE); ++ ++ if (a->extended_attrs) { ++ unsigned int ares = ++ le32_to_cpu(adesc->resolution); ++ ++ a->resolution = SENSOR_RES(ares); ++ a->exponent = ++ S32_EXT(SENSOR_RES_EXP(ares)); ++ dsize += sizeof(adesc->resolution); ++ ++ scmi_parse_range_attrs(&a->attrs, ++ &adesc->attrs); ++ dsize += sizeof(adesc->attrs); ++ } ++ ++ adesc = (typeof(adesc))((u8 *)adesc + dsize); ++ } ++ ++ desc_index += num_returned; ++ ++ scmi_reset_rx_to_maxsz(handle, te); ++ /* ++ * check for both returned and remaining to avoid infinite ++ * loop due to buggy firmware ++ */ ++ } while (num_returned && num_remaining); ++ ++ scmi_xfer_put(handle, te); ++ return ret; ++} ++ + static int scmi_sensor_description_get(const struct scmi_handle *handle, + struct sensors_info *si) + { +@@ -131,9 +402,10 @@ static int scmi_sensor_description_get(const struct scmi_handle *handle, + buf = t->rx.buf; + + do { ++ struct scmi_sensor_descriptor *sdesc; ++ + /* Set the number of sensors to be skipped/already read */ + put_unaligned_le32(desc_index, t->tx.buf); +- + ret = scmi_do_xfer(handle, t); + if (ret) + break; +@@ -147,22 +419,97 @@ static int scmi_sensor_description_get(const struct scmi_handle *handle, + break; + } + ++ sdesc = &buf->desc[0]; + for (cnt = 0; cnt < num_returned; cnt++) { + u32 attrh, attrl; + struct scmi_sensor_info *s; ++ size_t dsize = SCMI_MSG_RESP_SENS_DESCR_BASE_SZ; + +- attrl = le32_to_cpu(buf->desc[cnt].attributes_low); +- attrh = le32_to_cpu(buf->desc[cnt].attributes_high); + s = &si->sensors[desc_index + cnt]; +- s->id = le32_to_cpu(buf->desc[cnt].id); +- s->type = SENSOR_TYPE(attrh); +- s->scale = SENSOR_SCALE(attrh); +- /* Sign extend to a full s8 */ +- if (s->scale & SENSOR_SCALE_SIGN) +- s->scale |= SENSOR_SCALE_EXTEND; ++ s->id = le32_to_cpu(sdesc->id); ++ ++ attrl = le32_to_cpu(sdesc->attributes_low); ++ /* common bitfields parsing */ + s->async = SUPPORTS_ASYNC_READ(attrl); + s->num_trip_points = NUM_TRIP_POINTS(attrl); +- strlcpy(s->name, buf->desc[cnt].name, SCMI_MAX_STR_SIZE); ++ /** ++ * only SCMIv3.0 specific bitfield below. ++ * Such bitfields are assumed to be zeroed on non ++ * relevant fw versions...assuming fw not buggy ! ++ */ ++ s->update = SUPPORTS_UPDATE_NOTIFY(attrl); ++ s->timestamped = SUPPORTS_TIMESTAMP(attrl); ++ if (s->timestamped) ++ s->tstamp_scale = ++ S32_EXT(SENSOR_TSTAMP_EXP(attrl)); ++ s->extended_scalar_attrs = ++ SUPPORTS_EXTEND_ATTRS(attrl); ++ ++ attrh = le32_to_cpu(sdesc->attributes_high); ++ /* common bitfields parsing */ ++ s->scale = S32_EXT(SENSOR_SCALE(attrh)); ++ s->type = SENSOR_TYPE(attrh); ++ /* Use pre-allocated pool wherever possible */ ++ s->intervals.desc = s->intervals.prealloc_pool; ++ if (si->version == SCMIv2_SENSOR_PROTOCOL) { ++ s->intervals.segmented = false; ++ s->intervals.count = 1; ++ /* ++ * Convert SCMIv2.0 update interval format to ++ * SCMIv3.0 to be used as the common exposed ++ * descriptor, accessible via common macros. ++ */ ++ s->intervals.desc[0] = ++ (SENSOR_UPDATE_BASE(attrh) << 5) | ++ SENSOR_UPDATE_SCALE(attrh); ++ } else { ++ /* ++ * From SCMIv3.0 update intervals are retrieved ++ * via a dedicated (optional) command. ++ * Since the command is optional, on error carry ++ * on without any update interval. ++ */ ++ if (scmi_sensor_update_intervals(handle, s)) ++ dev_dbg(handle->dev, ++ "Update Intervals not available for sensor ID:%d\n", ++ s->id); ++ } ++ /** ++ * only > SCMIv2.0 specific bitfield below. ++ * Such bitfields are assumed to be zeroed on non ++ * relevant fw versions...assuming fw not buggy ! ++ */ ++ s->num_axis = min_t(unsigned int, ++ SUPPORTS_AXIS(attrh) ? ++ SENSOR_AXIS_NUMBER(attrh) : 0, ++ SCMI_MAX_NUM_SENSOR_AXIS); ++ strlcpy(s->name, sdesc->name, SCMI_MAX_STR_SIZE); ++ ++ if (s->extended_scalar_attrs) { ++ s->sensor_power = le32_to_cpu(sdesc->power); ++ dsize += sizeof(sdesc->power); ++ /* Only for sensors reporting scalar values */ ++ if (s->num_axis == 0) { ++ unsigned int sres = ++ le32_to_cpu(sdesc->resolution); ++ ++ s->resolution = SENSOR_RES(sres); ++ s->exponent = ++ S32_EXT(SENSOR_RES_EXP(sres)); ++ dsize += sizeof(sdesc->resolution); ++ ++ scmi_parse_range_attrs(&s->scalar_attrs, ++ &sdesc->scalar_attrs); ++ dsize += sizeof(sdesc->scalar_attrs); ++ } ++ } ++ if (s->num_axis > 0) { ++ ret = scmi_sensor_axis_description(handle, s); ++ if (ret) ++ goto out; ++ } ++ ++ sdesc = (typeof(sdesc))((u8 *)sdesc + dsize); + } + + desc_index += num_returned; +@@ -174,6 +521,7 @@ static int scmi_sensor_description_get(const struct scmi_handle *handle, + */ + } while (num_returned && num_remaining); + ++out: + scmi_xfer_put(handle, t); + return ret; + } +diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h +index 9cd312a1ff92..0792b0be25a3 100644 +--- a/include/linux/scmi_protocol.h ++++ b/include/linux/scmi_protocol.h +@@ -8,6 +8,7 @@ + #ifndef _LINUX_SCMI_PROTOCOL_H + #define _LINUX_SCMI_PROTOCOL_H + ++#include + #include + #include + #include +@@ -148,13 +149,135 @@ struct scmi_power_ops { + u32 *state); + }; + ++/** ++ * scmi_range_attrs - specifies a sensor or axis values' range ++ * @min_range: The minimum value which can be represented by the sensor/axis. ++ * @max_range: The maximum value which can be represented by the sensor/axis. ++ */ ++struct scmi_range_attrs { ++ long long min_range; ++ long long max_range; ++}; ++ ++/** ++ * scmi_sensor_axis_info - describes one sensor axes ++ * @id: The axes ID. ++ * @type: Axes type. Chosen amongst one of @enum scmi_sensor_class. ++ * @scale: Power-of-10 multiplier applied to the axis unit. ++ * @name: NULL-terminated string representing axes name as advertised by ++ * SCMI platform. ++ * @extended_attrs: Flag to indicate the presence of additional extended ++ * attributes for this axes. ++ * @resolution: Extended attribute representing the resolution of the axes. ++ * Set to 0 if not reported by this axes. ++ * @exponent: Extended attribute representing the power-of-10 multiplier that ++ * is applied to the resolution field. Set to 0 if not reported by ++ * this axes. ++ * @attrs: Extended attributes representing minimum and maximum values ++ * measurable by this axes. Set to 0 if not reported by this sensor. ++ */ ++struct scmi_sensor_axis_info { ++ unsigned int id; ++ unsigned int type; ++ int scale; ++ char name[SCMI_MAX_STR_SIZE]; ++ bool extended_attrs; ++ unsigned int resolution; ++ int exponent; ++ struct scmi_range_attrs attrs; ++}; ++ ++/** ++ * scmi_sensor_intervals_info - describes number and type of available update ++ * intervals ++ * @segmented: Flag for segmented intervals' representation. When True there ++ * will be exactly 3 intervals in @desc, with each entry ++ * representing a member of a segment in this order: ++ * {lowest update interval, highest update interval, step size} ++ * @count: Number of intervals described in @desc. ++ * @desc: Array of @count interval descriptor bitmask represented as detailed in ++ * the SCMI specification: it can be accessed using the accompanying ++ * macros. ++ * @prealloc_pool: A minimal preallocated pool of desc entries used to avoid ++ * lesser-than-64-bytes dynamic allocation for small @count ++ * values. ++ */ ++struct scmi_sensor_intervals_info { ++ bool segmented; ++ unsigned int count; ++#define SCMI_SENS_INTVL_SEGMENT_LOW 0 ++#define SCMI_SENS_INTVL_SEGMENT_HIGH 1 ++#define SCMI_SENS_INTVL_SEGMENT_STEP 2 ++ unsigned int *desc; ++#define SCMI_SENS_INTVL_GET_SECS(x) FIELD_GET(GENMASK(20, 5), (x)) ++#define SCMI_SENS_INTVL_GET_EXP(x) \ ++ ({ \ ++ int __signed_exp = FIELD_GET(GENMASK(4, 0), (x)); \ ++ \ ++ if (__signed_exp & BIT(4)) \ ++ __signed_exp |= GENMASK(31, 5); \ ++ __signed_exp; \ ++ }) ++#define SCMI_MAX_PREALLOC_POOL 16 ++ unsigned int prealloc_pool[SCMI_MAX_PREALLOC_POOL]; ++}; ++ ++/** ++ * struct scmi_sensor_info - represents information related to one of the ++ * available sensors. ++ * @id: Sensor ID. ++ * @type: Sensor type. Chosen amongst one of @enum scmi_sensor_class. ++ * @scale: Power-of-10 multiplier applied to the sensor unit. ++ * @num_trip_points: Number of maximum configurable trip points. ++ * @async: Flag for asynchronous read support. ++ * @update: Flag for continuouos update notification support. ++ * @timestamped: Flag for timestamped read support. ++ * @tstamp_scale: Power-of-10 multiplier applied to the sensor timestamps to ++ * represent it in seconds. ++ * @num_axis: Number of supported axis if any. Reported as 0 for scalar sensors. ++ * @axis: Pointer to an array of @num_axis descriptors. ++ * @intervals: Descriptor of available update intervals. ++ * @sensor_config: A bitmask reporting the current sensor configuration as ++ * detailed in the SCMI specification: it can accessed and ++ * modified through the accompanying macros. ++ * @name: NULL-terminated string representing sensor name as advertised by ++ * SCMI platform. ++ * @extended_scalar_attrs: Flag to indicate the presence of additional extended ++ * attributes for this sensor. ++ * @sensor_power: Extended attribute representing the average power ++ * consumed by the sensor in microwatts (uW) when it is active. ++ * Reported here only for scalar sensors. ++ * Set to 0 if not reported by this sensor. ++ * @resolution: Extended attribute representing the resolution of the sensor. ++ * Reported here only for scalar sensors. ++ * Set to 0 if not reported by this sensor. ++ * @exponent: Extended attribute representing the power-of-10 multiplier that is ++ * applied to the resolution field. ++ * Reported here only for scalar sensors. ++ * Set to 0 if not reported by this sensor. ++ * @scalar_attrs: Extended attributes representing minimum and maximum ++ * measurable values by this sensor. ++ * Reported here only for scalar sensors. ++ * Set to 0 if not reported by this sensor. ++ */ + struct scmi_sensor_info { +- u32 id; +- u8 type; +- s8 scale; +- u8 num_trip_points; ++ unsigned int id; ++ unsigned int type; ++ int scale; ++ unsigned int num_trip_points; + bool async; ++ bool update; ++ bool timestamped; ++ int tstamp_scale; ++ unsigned int num_axis; ++ struct scmi_sensor_axis_info *axis; ++ struct scmi_sensor_intervals_info intervals; + char name[SCMI_MAX_STR_SIZE]; ++ bool extended_scalar_attrs; ++ unsigned int sensor_power; ++ unsigned int resolution; ++ int exponent; ++ struct scmi_range_attrs scalar_attrs; + }; + + /* +@@ -163,11 +286,100 @@ struct scmi_sensor_info { + */ + enum scmi_sensor_class { + NONE = 0x0, ++ UNSPEC = 0x1, + TEMPERATURE_C = 0x2, ++ TEMPERATURE_F = 0x3, ++ TEMPERATURE_K = 0x4, + VOLTAGE = 0x5, + CURRENT = 0x6, + POWER = 0x7, + ENERGY = 0x8, ++ CHARGE = 0x9, ++ VOLTAMPERE = 0xA, ++ NITS = 0xB, ++ LUMENS = 0xC, ++ LUX = 0xD, ++ CANDELAS = 0xE, ++ KPA = 0xF, ++ PSI = 0x10, ++ NEWTON = 0x11, ++ CFM = 0x12, ++ RPM = 0x13, ++ HERTZ = 0x14, ++ SECS = 0x15, ++ MINS = 0x16, ++ HOURS = 0x17, ++ DAYS = 0x18, ++ WEEKS = 0x19, ++ MILS = 0x1A, ++ INCHES = 0x1B, ++ FEET = 0x1C, ++ CUBIC_INCHES = 0x1D, ++ CUBIC_FEET = 0x1E, ++ METERS = 0x1F, ++ CUBIC_CM = 0x20, ++ CUBIC_METERS = 0x21, ++ LITERS = 0x22, ++ FLUID_OUNCES = 0x23, ++ RADIANS = 0x24, ++ STERADIANS = 0x25, ++ REVOLUTIONS = 0x26, ++ CYCLES = 0x27, ++ GRAVITIES = 0x28, ++ OUNCES = 0x29, ++ POUNDS = 0x2A, ++ FOOT_POUNDS = 0x2B, ++ OUNCE_INCHES = 0x2C, ++ GAUSS = 0x2D, ++ GILBERTS = 0x2E, ++ HENRIES = 0x2F, ++ FARADS = 0x30, ++ OHMS = 0x31, ++ SIEMENS = 0x32, ++ MOLES = 0x33, ++ BECQUERELS = 0x34, ++ PPM = 0x35, ++ DECIBELS = 0x36, ++ DBA = 0x37, ++ DBC = 0x38, ++ GRAYS = 0x39, ++ SIEVERTS = 0x3A, ++ COLOR_TEMP_K = 0x3B, ++ BITS = 0x3C, ++ BYTES = 0x3D, ++ WORDS = 0x3E, ++ DWORDS = 0x3F, ++ QWORDS = 0x40, ++ PERCENTAGE = 0x41, ++ PASCALS = 0x42, ++ COUNTS = 0x43, ++ GRAMS = 0x44, ++ NEWTON_METERS = 0x45, ++ HITS = 0x46, ++ MISSES = 0x47, ++ RETRIES = 0x48, ++ OVERRUNS = 0x49, ++ UNDERRUNS = 0x4A, ++ COLLISIONS = 0x4B, ++ PACKETS = 0x4C, ++ MESSAGES = 0x4D, ++ CHARS = 0x4E, ++ ERRORS = 0x4F, ++ CORRECTED_ERRS = 0x50, ++ UNCORRECTABLE_ERRS = 0x51, ++ SQ_MILS = 0x52, ++ SQ_INCHES = 0x53, ++ SQ_FEET = 0x54, ++ SQ_CM = 0x55, ++ SQ_METERS = 0x56, ++ RADIANS_SEC = 0x57, ++ BPM = 0x58, ++ METERS_SEC_SQUARED = 0x59, ++ METERS_SEC = 0x5A, ++ CUBIC_METERS_SEC = 0x5B, ++ MM_MERCURY = 0x5C, ++ RADIANS_SEC_SQUARED = 0x5D, ++ OEM_UNIT = 0xFF + }; + + /** diff --git a/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0003-hwmon-scmi-update-hwmon-internal-scale-data-type.patch b/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0003-hwmon-scmi-update-hwmon-internal-scale-data-type.patch new file mode 100644 index 00000000..efc3bf1d --- /dev/null +++ b/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0003-hwmon-scmi-update-hwmon-internal-scale-data-type.patch @@ -0,0 +1,30 @@ +From f32f6399b8a0a72c9e6c5c824a19f09f78f17c13 Mon Sep 17 00:00:00 2001 +From: Cristian Marussi +Date: Thu, 19 Nov 2020 17:49:03 +0000 +Subject: [PATCH] hwmon: scmi: update hwmon internal scale data type + +Use an int to calculate scale values inside scmi_hwmon_scale() to match +the updated scale data type in struct scmi_sensor_info. + +Cc: linux-hwmon@vger.kernel.org +Cc: Guenter Roeck +Signed-off-by: Cristian Marussi +Acked-by: Guenter Roeck +Signed-off-by: Vasyl Vavrychuk +--- + drivers/hwmon/scmi-hwmon.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/drivers/hwmon/scmi-hwmon.c b/drivers/hwmon/scmi-hwmon.c +index 09ce30cba54b..17d064e58938 100644 +--- a/drivers/hwmon/scmi-hwmon.c ++++ b/drivers/hwmon/scmi-hwmon.c +@@ -30,7 +30,7 @@ static inline u64 __pow10(u8 x) + + static int scmi_hwmon_scale(const struct scmi_sensor_info *sensor, u64 *value) + { +- s8 scale = sensor->scale; ++ int scale = sensor->scale; + u64 f; + + switch (sensor->type) { diff --git a/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0004-firmware-arm_scmi-add-SCMIv3.0-Sensors-timestamped-r.patch b/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0004-firmware-arm_scmi-add-SCMIv3.0-Sensors-timestamped-r.patch new file mode 100644 index 00000000..e8839d95 --- /dev/null +++ b/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0004-firmware-arm_scmi-add-SCMIv3.0-Sensors-timestamped-r.patch @@ -0,0 +1,236 @@ +From bb48061a3f1edd4203518aa4b8a021ae5d1582a4 Mon Sep 17 00:00:00 2001 +From: Cristian Marussi +Date: Thu, 19 Nov 2020 17:49:04 +0000 +Subject: [PATCH] firmware: arm_scmi: add SCMIv3.0 Sensors timestamped reads + +Add new .reading_get_timestamped() method to sensor_ops to support SCMIv3.0 +timestamped reads. + +Signed-off-by: Cristian Marussi +Signed-off-by: Vasyl Vavrychuk +--- + drivers/firmware/arm_scmi/sensors.c | 127 ++++++++++++++++++++++++++-- + include/linux/scmi_protocol.h | 22 +++++ + 2 files changed, 143 insertions(+), 6 deletions(-) + +diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c +index a85827f60a02..2239af5f9e6e 100644 +--- a/drivers/firmware/arm_scmi/sensors.c ++++ b/drivers/firmware/arm_scmi/sensors.c +@@ -155,6 +155,23 @@ struct scmi_msg_sensor_reading_get { + #define SENSOR_READ_ASYNC BIT(0) + }; + ++struct scmi_resp_sensor_reading_complete { ++ __le32 id; ++ __le64 readings; ++}; ++ ++struct scmi_sensor_reading_le { ++ __le32 sensor_value_low; ++ __le32 sensor_value_high; ++ __le32 timestamp_low; ++ __le32 timestamp_high; ++}; ++ ++struct scmi_resp_sensor_reading_complete_v3 { ++ __le32 id; ++ struct scmi_sensor_reading_le readings[]; ++}; ++ + struct scmi_sensor_trip_notify_payld { + __le32 agent_id; + __le32 sensor_id; +@@ -575,6 +592,21 @@ scmi_sensor_trip_point_config(const struct scmi_handle *handle, u32 sensor_id, + return ret; + } + ++/** ++ * scmi_sensor_reading_get - Read scalar sensor value ++ * @handle: Platform handle ++ * @sensor_id: Sensor ID ++ * @value: The 64bit value sensor reading ++ * ++ * This function returns a single 64 bit reading value representing the sensor ++ * value; if the platform SCMI Protocol implementation and the sensor support ++ * multiple axis and timestamped-reads, this just returns the first axis while ++ * dropping the timestamp value. ++ * Use instead the @scmi_sensor_reading_get_timestamped to retrieve the array of ++ * timestamped multi-axis values. ++ * ++ * Return: 0 on Success ++ */ + static int scmi_sensor_reading_get(const struct scmi_handle *handle, + u32 sensor_id, u64 *value) + { +@@ -585,20 +617,24 @@ static int scmi_sensor_reading_get(const struct scmi_handle *handle, + struct scmi_sensor_info *s = si->sensors + sensor_id; + + ret = scmi_xfer_get_init(handle, SENSOR_READING_GET, +- SCMI_PROTOCOL_SENSOR, sizeof(*sensor), +- sizeof(u64), &t); ++ SCMI_PROTOCOL_SENSOR, sizeof(*sensor), 0, &t); + if (ret) + return ret; + + sensor = t->tx.buf; + sensor->id = cpu_to_le32(sensor_id); +- + if (s->async) { + sensor->flags = cpu_to_le32(SENSOR_READ_ASYNC); + ret = scmi_do_xfer_with_response(handle, t); +- if (!ret) +- *value = get_unaligned_le64((void *) +- ((__le32 *)t->rx.buf + 1)); ++ if (!ret) { ++ struct scmi_resp_sensor_reading_complete *resp; ++ ++ resp = t->rx.buf; ++ if (le32_to_cpu(resp->id) == sensor_id) ++ *value = get_unaligned_le64(&resp->readings); ++ else ++ ret = -EPROTO; ++ } + } else { + sensor->flags = cpu_to_le32(0); + ret = scmi_do_xfer(handle, t); +@@ -610,6 +646,84 @@ static int scmi_sensor_reading_get(const struct scmi_handle *handle, + return ret; + } + ++static inline void ++scmi_parse_sensor_readings(struct scmi_sensor_reading *out, ++ const struct scmi_sensor_reading_le *in) ++{ ++ out->value = get_unaligned_le64((void *)&in->sensor_value_low); ++ out->timestamp = get_unaligned_le64((void *)&in->timestamp_low); ++} ++ ++/** ++ * scmi_sensor_reading_get_timestamped - Read multiple-axis timestamped values ++ * @handle: Platform handle ++ * @sensor_id: Sensor ID ++ * @count: The length of the provided @readings array ++ * @readings: An array of elements each representing a timestamped per-axis ++ * reading of type @struct scmi_sensor_reading. ++ * Returned readings are ordered as the @axis descriptors array ++ * included in @struct scmi_sensor_info and the max number of ++ * returned elements is min(@count, @num_axis); ideally the provided ++ * array should be of length @count equal to @num_axis. ++ * ++ * Return: 0 on Success ++ */ ++static int ++scmi_sensor_reading_get_timestamped(const struct scmi_handle *handle, ++ u32 sensor_id, u8 count, ++ struct scmi_sensor_reading *readings) ++{ ++ int ret; ++ struct scmi_xfer *t; ++ struct scmi_msg_sensor_reading_get *sensor; ++ struct sensors_info *si = handle->sensor_priv; ++ struct scmi_sensor_info *s = si->sensors + sensor_id; ++ ++ if (!count || !readings || ++ (!s->num_axis && count > 1) || (s->num_axis && count > s->num_axis)) ++ return -EINVAL; ++ ++ ret = scmi_xfer_get_init(handle, SENSOR_READING_GET, ++ SCMI_PROTOCOL_SENSOR, sizeof(*sensor), 0, &t); ++ if (ret) ++ return ret; ++ ++ sensor = t->tx.buf; ++ sensor->id = cpu_to_le32(sensor_id); ++ if (s->async) { ++ sensor->flags = cpu_to_le32(SENSOR_READ_ASYNC); ++ ret = scmi_do_xfer_with_response(handle, t); ++ if (!ret) { ++ int i; ++ struct scmi_resp_sensor_reading_complete_v3 *resp; ++ ++ resp = t->rx.buf; ++ /* Retrieve only the number of requested axis anyway */ ++ if (le32_to_cpu(resp->id) == sensor_id) ++ for (i = 0; i < count; i++) ++ scmi_parse_sensor_readings(&readings[i], ++ &resp->readings[i]); ++ else ++ ret = -EPROTO; ++ } ++ } else { ++ sensor->flags = cpu_to_le32(0); ++ ret = scmi_do_xfer(handle, t); ++ if (!ret) { ++ int i; ++ struct scmi_sensor_reading_le *resp_readings; ++ ++ resp_readings = t->rx.buf; ++ for (i = 0; i < count; i++) ++ scmi_parse_sensor_readings(&readings[i], ++ &resp_readings[i]); ++ } ++ } ++ ++ scmi_xfer_put(handle, t); ++ return ret; ++} ++ + static const struct scmi_sensor_info * + scmi_sensor_info_get(const struct scmi_handle *handle, u32 sensor_id) + { +@@ -630,6 +744,7 @@ static const struct scmi_sensor_ops sensor_ops = { + .info_get = scmi_sensor_info_get, + .trip_point_config = scmi_sensor_trip_point_config, + .reading_get = scmi_sensor_reading_get, ++ .reading_get_timestamped = scmi_sensor_reading_get_timestamped, + }; + + static int scmi_sensor_set_notify_enabled(const struct scmi_handle *handle, +diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h +index 0792b0be25a3..0c52bf0cbee4 100644 +--- a/include/linux/scmi_protocol.h ++++ b/include/linux/scmi_protocol.h +@@ -149,6 +149,20 @@ struct scmi_power_ops { + u32 *state); + }; + ++/** ++ * scmi_sensor_reading - represent a timestamped read ++ * ++ * Used by @reading_get_timestamped method. ++ * ++ * @value: The signed value sensor read. ++ * @timestamp: An unsigned timestamp for the sensor read, as provided by ++ * SCMI platform. Set to zero when not available. ++ */ ++struct scmi_sensor_reading { ++ long long value; ++ unsigned long long timestamp; ++}; ++ + /** + * scmi_range_attrs - specifies a sensor or axis values' range + * @min_range: The minimum value which can be represented by the sensor/axis. +@@ -390,6 +404,11 @@ enum scmi_sensor_class { + * @info_get: get the information of the specified sensor + * @trip_point_config: selects and configures a trip-point of interest + * @reading_get: gets the current value of the sensor ++ * @reading_get_timestamped: gets the current value and timestamp, when ++ * available, of the sensor. (as of v3.0 spec) ++ * Supports multi-axis sensors for sensors which ++ * supports it and if the @reading array size of ++ * @count entry equals the sensor num_axis + */ + struct scmi_sensor_ops { + int (*count_get)(const struct scmi_handle *handle); +@@ -399,6 +418,9 @@ struct scmi_sensor_ops { + u32 sensor_id, u8 trip_id, u64 trip_value); + int (*reading_get)(const struct scmi_handle *handle, u32 sensor_id, + u64 *value); ++ int (*reading_get_timestamped)(const struct scmi_handle *handle, ++ u32 sensor_id, u8 count, ++ struct scmi_sensor_reading *readings); + }; + + /** diff --git a/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0005-firmware-arm_scmi-add-SCMIv3.0-Sensor-configuration-.patch b/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0005-firmware-arm_scmi-add-SCMIv3.0-Sensor-configuration-.patch new file mode 100644 index 00000000..57095fe9 --- /dev/null +++ b/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0005-firmware-arm_scmi-add-SCMIv3.0-Sensor-configuration-.patch @@ -0,0 +1,172 @@ +From 3c8f7becd835fc70aee188ad77655a3fdf5a169c Mon Sep 17 00:00:00 2001 +From: Cristian Marussi +Date: Thu, 19 Nov 2020 17:49:05 +0000 +Subject: [PATCH] firmware: arm_scmi: add SCMIv3.0 Sensor configuration support + +Add SCMIv3.0 Sensor support for CONFIG_GET/CONFIG_SET commands. + +Signed-off-by: Cristian Marussi +Signed-off-by: Vasyl Vavrychuk +--- + drivers/firmware/arm_scmi/sensors.c | 63 +++++++++++++++++++++++++++++ + include/linux/scmi_protocol.h | 37 +++++++++++++++++ + 2 files changed, 100 insertions(+) + +diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c +index 2239af5f9e6e..10c271d430e7 100644 +--- a/drivers/firmware/arm_scmi/sensors.c ++++ b/drivers/firmware/arm_scmi/sensors.c +@@ -23,6 +23,8 @@ enum scmi_sensor_protocol_cmd { + SENSOR_READING_GET = 0x6, + SENSOR_AXIS_DESCRIPTION_GET = 0x7, + SENSOR_LIST_UPDATE_INTERVALS = 0x8, ++ SENSOR_CONFIG_GET = 0x9, ++ SENSOR_CONFIG_SET = 0xA, + }; + + struct scmi_msg_resp_sensor_attributes { +@@ -149,6 +151,11 @@ struct scmi_msg_set_sensor_trip_point { + __le32 value_high; + }; + ++struct scmi_msg_sensor_config_set { ++ __le32 id; ++ __le32 sensor_config; ++}; ++ + struct scmi_msg_sensor_reading_get { + __le32 id; + __le32 flags; +@@ -592,6 +599,60 @@ scmi_sensor_trip_point_config(const struct scmi_handle *handle, u32 sensor_id, + return ret; + } + ++static int scmi_sensor_config_get(const struct scmi_handle *handle, ++ u32 sensor_id, u32 *sensor_config) ++{ ++ int ret; ++ struct scmi_xfer *t; ++ ++ ret = scmi_xfer_get_init(handle, SENSOR_CONFIG_GET, ++ SCMI_PROTOCOL_SENSOR, sizeof(__le32), ++ sizeof(__le32), &t); ++ if (ret) ++ return ret; ++ ++ put_unaligned_le32(cpu_to_le32(sensor_id), t->tx.buf); ++ ret = scmi_do_xfer(handle, t); ++ if (!ret) { ++ struct sensors_info *si = handle->sensor_priv; ++ struct scmi_sensor_info *s = si->sensors + sensor_id; ++ ++ *sensor_config = get_unaligned_le64(t->rx.buf); ++ s->sensor_config = *sensor_config; ++ } ++ ++ scmi_xfer_put(handle, t); ++ return ret; ++} ++ ++static int scmi_sensor_config_set(const struct scmi_handle *handle, ++ u32 sensor_id, u32 sensor_config) ++{ ++ int ret; ++ struct scmi_xfer *t; ++ struct scmi_msg_sensor_config_set *msg; ++ ++ ret = scmi_xfer_get_init(handle, SENSOR_CONFIG_SET, ++ SCMI_PROTOCOL_SENSOR, sizeof(*msg), 0, &t); ++ if (ret) ++ return ret; ++ ++ msg = t->tx.buf; ++ msg->id = cpu_to_le32(sensor_id); ++ msg->sensor_config = cpu_to_le32(sensor_config); ++ ++ ret = scmi_do_xfer(handle, t); ++ if (!ret) { ++ struct sensors_info *si = handle->sensor_priv; ++ struct scmi_sensor_info *s = si->sensors + sensor_id; ++ ++ s->sensor_config = sensor_config; ++ } ++ ++ scmi_xfer_put(handle, t); ++ return ret; ++} ++ + /** + * scmi_sensor_reading_get - Read scalar sensor value + * @handle: Platform handle +@@ -745,6 +806,8 @@ static const struct scmi_sensor_ops sensor_ops = { + .trip_point_config = scmi_sensor_trip_point_config, + .reading_get = scmi_sensor_reading_get, + .reading_get_timestamped = scmi_sensor_reading_get_timestamped, ++ .config_get = scmi_sensor_config_get, ++ .config_set = scmi_sensor_config_set, + }; + + static int scmi_sensor_set_notify_enabled(const struct scmi_handle *handle, +diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h +index 0c52bf0cbee4..7e9e2cd3d46b 100644 +--- a/include/linux/scmi_protocol.h ++++ b/include/linux/scmi_protocol.h +@@ -286,7 +286,38 @@ struct scmi_sensor_info { + unsigned int num_axis; + struct scmi_sensor_axis_info *axis; + struct scmi_sensor_intervals_info intervals; ++ unsigned int sensor_config; ++#define SCMI_SENS_CFG_UPDATE_SECS_MASK GENMASK(31, 16) ++#define SCMI_SENS_CFG_GET_UPDATE_SECS(x) \ ++ FIELD_GET(SCMI_SENS_CFG_UPDATE_SECS_MASK, (x)) ++ ++#define SCMI_SENS_CFG_UPDATE_EXP_MASK GENMASK(15, 11) ++#define SCMI_SENS_CFG_GET_UPDATE_EXP(x) \ ++ ({ \ ++ int __signed_exp = \ ++ FIELD_GET(SCMI_SENS_CFG_UPDATE_EXP_MASK, (x)); \ ++ \ ++ if (__signed_exp & BIT(4)) \ ++ __signed_exp |= GENMASK(31, 5); \ ++ __signed_exp; \ ++ }) ++ ++#define SCMI_SENS_CFG_ROUND_MASK GENMASK(10, 9) ++#define SCMI_SENS_CFG_ROUND_AUTO 2 ++#define SCMI_SENS_CFG_ROUND_UP 1 ++#define SCMI_SENS_CFG_ROUND_DOWN 0 ++ ++#define SCMI_SENS_CFG_TSTAMP_ENABLED_MASK BIT(1) ++#define SCMI_SENS_CFG_TSTAMP_ENABLE 1 ++#define SCMI_SENS_CFG_TSTAMP_DISABLE 0 ++#define SCMI_SENS_CFG_IS_TSTAMP_ENABLED(x) \ ++ FIELD_GET(SCMI_SENS_CFG_TSTAMP_ENABLED_MASK, (x)) ++ ++#define SCMI_SENS_CFG_SENSOR_ENABLED_MASK BIT(0) ++#define SCMI_SENS_CFG_SENSOR_ENABLE 1 ++#define SCMI_SENS_CFG_SENSOR_DISABLE 0 + char name[SCMI_MAX_STR_SIZE]; ++#define SCMI_SENS_CFG_IS_ENABLED(x) FIELD_GET(BIT(0), (x)) + bool extended_scalar_attrs; + unsigned int sensor_power; + unsigned int resolution; +@@ -409,6 +440,8 @@ enum scmi_sensor_class { + * Supports multi-axis sensors for sensors which + * supports it and if the @reading array size of + * @count entry equals the sensor num_axis ++ * @config_get: Get sensor current configuration ++ * @config_set: Set sensor current configuration + */ + struct scmi_sensor_ops { + int (*count_get)(const struct scmi_handle *handle); +@@ -421,6 +454,10 @@ struct scmi_sensor_ops { + int (*reading_get_timestamped)(const struct scmi_handle *handle, + u32 sensor_id, u8 count, + struct scmi_sensor_reading *readings); ++ int (*config_get)(const struct scmi_handle *handle, ++ u32 sensor_id, u32 *sensor_config); ++ int (*config_set)(const struct scmi_handle *handle, ++ u32 sensor_id, u32 sensor_config); + }; + + /** diff --git a/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0006-firmware-arm_scmi-add-SCMIv3.0-Sensor-notifications.patch b/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0006-firmware-arm_scmi-add-SCMIv3.0-Sensor-notifications.patch new file mode 100644 index 00000000..e8c8f420 --- /dev/null +++ b/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0006-firmware-arm_scmi-add-SCMIv3.0-Sensor-notifications.patch @@ -0,0 +1,234 @@ +From 53a49c0e12be913ecb81c55e6ee1f214704043cc Mon Sep 17 00:00:00 2001 +From: Cristian Marussi +Date: Thu, 19 Nov 2020 17:49:06 +0000 +Subject: [PATCH] firmware: arm_scmi: add SCMIv3.0 Sensor notifications + +Add support for new SCMIv3.0 SENSOR_UPDATE notification. + +Signed-off-by: Cristian Marussi +Signed-off-by: Vasyl Vavrychuk +--- + drivers/firmware/arm_scmi/sensors.c | 124 +++++++++++++++++++++++----- + include/linux/scmi_protocol.h | 9 ++ + 2 files changed, 114 insertions(+), 19 deletions(-) + +diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c +index 10c271d430e7..b3d7c08c09a0 100644 +--- a/drivers/firmware/arm_scmi/sensors.c ++++ b/drivers/firmware/arm_scmi/sensors.c +@@ -25,6 +25,7 @@ enum scmi_sensor_protocol_cmd { + SENSOR_LIST_UPDATE_INTERVALS = 0x8, + SENSOR_CONFIG_GET = 0x9, + SENSOR_CONFIG_SET = 0xA, ++ SENSOR_CONTINUOUS_UPDATE_NOTIFY = 0xB, + }; + + struct scmi_msg_resp_sensor_attributes { +@@ -132,10 +133,10 @@ struct scmi_msg_resp_sensor_list_update_intervals { + __le32 intervals[]; + }; + +-struct scmi_msg_sensor_trip_point_notify { ++struct scmi_msg_sensor_request_notify { + __le32 id; + __le32 event_control; +-#define SENSOR_TP_NOTIFY_ALL BIT(0) ++#define SENSOR_NOTIFY_ALL BIT(0) + }; + + struct scmi_msg_set_sensor_trip_point { +@@ -185,6 +186,12 @@ struct scmi_sensor_trip_notify_payld { + __le32 trip_point_desc; + }; + ++struct scmi_sensor_update_notify_payld { ++ __le32 agent_id; ++ __le32 sensor_id; ++ struct scmi_sensor_reading_le readings[]; ++}; ++ + struct sensors_info { + u32 version; + int num_sensors; +@@ -550,15 +557,16 @@ static int scmi_sensor_description_get(const struct scmi_handle *handle, + return ret; + } + +-static int scmi_sensor_trip_point_notify(const struct scmi_handle *handle, +- u32 sensor_id, bool enable) ++static inline int ++scmi_sensor_request_notify(const struct scmi_handle *handle, u32 sensor_id, ++ u8 message_id, bool enable) + { + int ret; +- u32 evt_cntl = enable ? SENSOR_TP_NOTIFY_ALL : 0; ++ u32 evt_cntl = enable ? SENSOR_NOTIFY_ALL : 0; + struct scmi_xfer *t; +- struct scmi_msg_sensor_trip_point_notify *cfg; ++ struct scmi_msg_sensor_request_notify *cfg; + +- ret = scmi_xfer_get_init(handle, SENSOR_TRIP_POINT_NOTIFY, ++ ret = scmi_xfer_get_init(handle, message_id, + SCMI_PROTOCOL_SENSOR, sizeof(*cfg), 0, &t); + if (ret) + return ret; +@@ -573,6 +581,23 @@ static int scmi_sensor_trip_point_notify(const struct scmi_handle *handle, + return ret; + } + ++static int scmi_sensor_trip_point_notify(const struct scmi_handle *handle, ++ u32 sensor_id, bool enable) ++{ ++ return scmi_sensor_request_notify(handle, sensor_id, ++ SENSOR_TRIP_POINT_NOTIFY, ++ enable); ++} ++ ++static int ++scmi_sensor_continuous_update_notify(const struct scmi_handle *handle, ++ u32 sensor_id, bool enable) ++{ ++ return scmi_sensor_request_notify(handle, sensor_id, ++ SENSOR_CONTINUOUS_UPDATE_NOTIFY, ++ enable); ++} ++ + static int + scmi_sensor_trip_point_config(const struct scmi_handle *handle, u32 sensor_id, + u8 trip_id, u64 trip_value) +@@ -815,7 +840,19 @@ static int scmi_sensor_set_notify_enabled(const struct scmi_handle *handle, + { + int ret; + +- ret = scmi_sensor_trip_point_notify(handle, src_id, enable); ++ switch (evt_id) { ++ case SCMI_EVENT_SENSOR_TRIP_POINT_EVENT: ++ ret = scmi_sensor_trip_point_notify(handle, src_id, enable); ++ break; ++ case SCMI_EVENT_SENSOR_UPDATE: ++ ret = scmi_sensor_continuous_update_notify(handle, src_id, ++ enable); ++ break; ++ default: ++ ret = -EINVAL; ++ break; ++ } ++ + if (ret) + pr_debug("FAIL_ENABLED - evt[%X] dom[%d] - ret:%d\n", + evt_id, src_id, ret); +@@ -828,20 +865,59 @@ static void *scmi_sensor_fill_custom_report(const struct scmi_handle *handle, + const void *payld, size_t payld_sz, + void *report, u32 *src_id) + { +- const struct scmi_sensor_trip_notify_payld *p = payld; +- struct scmi_sensor_trip_point_report *r = report; ++ void *rep = NULL; + +- if (evt_id != SCMI_EVENT_SENSOR_TRIP_POINT_EVENT || +- sizeof(*p) != payld_sz) +- return NULL; ++ switch (evt_id) { ++ case SCMI_EVENT_SENSOR_TRIP_POINT_EVENT: ++ { ++ const struct scmi_sensor_trip_notify_payld *p = payld; ++ struct scmi_sensor_trip_point_report *r = report; + +- r->timestamp = timestamp; +- r->agent_id = le32_to_cpu(p->agent_id); +- r->sensor_id = le32_to_cpu(p->sensor_id); +- r->trip_point_desc = le32_to_cpu(p->trip_point_desc); +- *src_id = r->sensor_id; ++ if (sizeof(*p) != payld_sz) ++ break; + +- return r; ++ r->timestamp = timestamp; ++ r->agent_id = le32_to_cpu(p->agent_id); ++ r->sensor_id = le32_to_cpu(p->sensor_id); ++ r->trip_point_desc = le32_to_cpu(p->trip_point_desc); ++ *src_id = r->sensor_id; ++ rep = r; ++ break; ++ } ++ case SCMI_EVENT_SENSOR_UPDATE: ++ { ++ int i; ++ struct scmi_sensor_info *s; ++ const struct scmi_sensor_update_notify_payld *p = payld; ++ struct scmi_sensor_update_report *r = report; ++ struct sensors_info *sinfo = handle->sensor_priv; ++ ++ /* payld_sz is variable for this event */ ++ r->sensor_id = le32_to_cpu(p->sensor_id); ++ if (r->sensor_id >= sinfo->num_sensors) ++ break; ++ r->timestamp = timestamp; ++ r->agent_id = le32_to_cpu(p->agent_id); ++ s = &sinfo->sensors[r->sensor_id]; ++ /* ++ * The generated report r (@struct scmi_sensor_update_report) ++ * was pre-allocated to contain up to SCMI_MAX_NUM_SENSOR_AXIS ++ * readings: here it is filled with the effective @num_axis ++ * readings defined for this sensor or 1 for scalar sensors. ++ */ ++ r->readings_count = s->num_axis ?: 1; ++ for (i = 0; i < r->readings_count; i++) ++ scmi_parse_sensor_readings(&r->readings[i], ++ &p->readings[i]); ++ *src_id = r->sensor_id; ++ rep = r; ++ break; ++ } ++ default: ++ break; ++ } ++ ++ return rep; + } + + static const struct scmi_event sensor_events[] = { +@@ -850,6 +926,16 @@ static const struct scmi_event sensor_events[] = { + .max_payld_sz = sizeof(struct scmi_sensor_trip_notify_payld), + .max_report_sz = sizeof(struct scmi_sensor_trip_point_report), + }, ++ { ++ .id = SCMI_EVENT_SENSOR_UPDATE, ++ .max_payld_sz = ++ sizeof(struct scmi_sensor_update_notify_payld) + ++ SCMI_MAX_NUM_SENSOR_AXIS * ++ sizeof(struct scmi_sensor_reading_le), ++ .max_report_sz = sizeof(struct scmi_sensor_update_report) + ++ SCMI_MAX_NUM_SENSOR_AXIS * ++ sizeof(struct scmi_sensor_reading), ++ }, + }; + + static const struct scmi_event_ops sensor_event_ops = { +diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h +index 7e9e2cd3d46b..be0be5ff7514 100644 +--- a/include/linux/scmi_protocol.h ++++ b/include/linux/scmi_protocol.h +@@ -657,6 +657,7 @@ enum scmi_notification_events { + SCMI_EVENT_PERFORMANCE_LIMITS_CHANGED = 0x0, + SCMI_EVENT_PERFORMANCE_LEVEL_CHANGED = 0x1, + SCMI_EVENT_SENSOR_TRIP_POINT_EVENT = 0x0, ++ SCMI_EVENT_SENSOR_UPDATE = 0x1, + SCMI_EVENT_RESET_ISSUED = 0x0, + SCMI_EVENT_BASE_ERROR_EVENT = 0x0, + SCMI_EVENT_SYSTEM_POWER_STATE_NOTIFIER = 0x0, +@@ -698,6 +699,14 @@ struct scmi_sensor_trip_point_report { + unsigned int trip_point_desc; + }; + ++struct scmi_sensor_update_report { ++ ktime_t timestamp; ++ unsigned int agent_id; ++ unsigned int sensor_id; ++ unsigned int readings_count; ++ struct scmi_sensor_reading readings[]; ++}; ++ + struct scmi_reset_issued_report { + ktime_t timestamp; + unsigned int agent_id; diff --git a/meta-egvirt/recipes-kernel/linux/linux-yocto_%.bbappend b/meta-egvirt/recipes-kernel/linux/linux-yocto_%.bbappend index 0f9bf658..d8ae5856 100644 --- a/meta-egvirt/recipes-kernel/linux/linux-yocto_%.bbappend +++ b/meta-egvirt/recipes-kernel/linux/linux-yocto_%.bbappend @@ -13,6 +13,16 @@ SRC_URI += " \ file://virtio_scmi.cfg \ " +# SCMI updates +SRC_URI += " \ + file://scmi/0001-firmware-arm_scmi-rework-scmi_sensors_protocol_init.patch \ + file://scmi/0002-firmware-arm_scmi-add-SCMIv3.0-Sensors-descriptors-e.patch \ + file://scmi/0003-hwmon-scmi-update-hwmon-internal-scale-data-type.patch \ + file://scmi/0004-firmware-arm_scmi-add-SCMIv3.0-Sensors-timestamped-r.patch \ + file://scmi/0005-firmware-arm_scmi-add-SCMIv3.0-Sensor-configuration-.patch \ + file://scmi/0006-firmware-arm_scmi-add-SCMIv3.0-Sensor-notifications.patch \ +" + # IIO SCMI SRC_URI += " \ file://iio-scmi/0001-iio-scmi-Adding-support-for-IIO-SCMI-Based-Sensors.patch \ -- cgit 1.2.3-korg