Add support for TI WL1837 This patch adds description of TI WL1837 and links interfaces to communicate with the IC. Signed-off-by: ito.yoshiki001 Reworked: - WL1837 specific devicetree configuration moved to the board specific r8a77951-agl-refhw.dts from agl-refhw-common.dtsi. - Switched to HCI_LL driver for BT support to match other upstream users and prepare for btwilink driver going away (dropped in 5.5 upstream). - WLAN_PWR_EN enabling moved to GPIO initialization to work around BT initialization problems. - Update sound configuration to enable WL1837 BT audio, and disable the HDMI1 audio left over from the original Salvator-X devicetree. The latter is clean up, as HDMI1 as defined uses a SSI that conflicts with the ak4613 configuration. Signed-off-by: Scott Murray --- arch/arm64/boot/dts/renesas/agl-refhw-common.dtsi | 37 +++++++--- arch/arm64/boot/dts/renesas/r8a77951-agl-refhw.dts | 84 ++++++++++++++++++----- 2 files changed, 94 insertions(+), 27 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/agl-refhw-common.dtsi b/arch/arm64/boot/dts/renesas/agl-refhw-common.dtsi index 796ac4c078e0..6f34b54c6ce1 100644 --- a/arch/arm64/boot/dts/renesas/agl-refhw-common.dtsi +++ b/arch/arm64/boot/dts/renesas/agl-refhw-common.dtsi @@ -183,6 +183,18 @@ 1800000 0>; }; + wlan_en: regulator-wlan_en { + compatible = "regulator-fixed"; + + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio7 2 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; + hdmi0-out { compatible = "hdmi-connector"; label = "HDMI0 OUT"; @@ -672,7 +684,8 @@ }; sound_pins: sound { - groups = "ssi349_ctrl", "ssi3_data", "ssi4_data"; + groups = "ssi349_ctrl", "ssi3_data", "ssi4_data", + "ssi78_ctrl", "ssi7_data", "ssi8_data"; function = "ssi"; }; @@ -827,24 +840,28 @@ }; &sdhi3 { + /* Default WLAN card configuration */ pinctrl-0 = <&sdhi3_pins>; - pinctrl-1 = <&sdhi3_pins_uhs>; - pinctrl-names = "default", "state_uhs"; + pinctrl-names = "default"; - vmmc-supply = <&vcc_sdhi3>; - vqmmc-supply = <&vccq_sdhi3>; - cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&wlan_en>; bus-width = <4>; - sd-uhs-sdr50; - sd-uhs-sdr104; - status = "okay"; + no-1-8-v; + non-removable; + cap-power-off-card; + keep-power-in-suspend; + + /* leave disabled by default */ }; &ssi4 { shared-pin; }; +&ssi8 { + shared-pin; +}; + &usb_extal_clk { clock-frequency = <50000000>; }; diff --git a/arch/arm64/boot/dts/renesas/r8a77951-agl-refhw.dts b/arch/arm64/boot/dts/renesas/r8a77951-agl-refhw.dts index 83638a6228c0..97cc6e08ee8f 100644 --- a/arch/arm64/boot/dts/renesas/r8a77951-agl-refhw.dts +++ b/arch/arm64/boot/dts/renesas/r8a77951-agl-refhw.dts @@ -119,6 +119,23 @@ }; }; + sound_wl18xx { + compatible = "audio-graph-card"; + label = "wl18xx"; + + dais = <&rsnd_port2>; + }; + + wl18xx_pcm { + compatible = "ti,wl18xx-pcm"; + status = "okay"; + + port { + wl18xx_endpoint: endpoint { + remote-endpoint = <&rsnd_for_wl18xx>; + }; + }; + }; }; &adsp { @@ -155,8 +172,14 @@ &sound_card { dais = <&rsnd_port0 /* ak4613 */ - &rsnd_port1 /* HDMI0 */ - &rsnd_port2>; /* HDMI1 */ + &rsnd_port1>; /* HDMI0 */ +}; + +&hscif0 { + bluetooth { + compatible = "ti,wl1837-st"; + enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>; + }; }; &hdmi0 { @@ -192,12 +215,6 @@ remote-endpoint = <&hdmi1_con>; }; }; - port@2 { - reg = <2>; - dw_hdmi1_snd_in: endpoint { - remote-endpoint = <&rsnd_endpoint2>; - }; - }; }; }; @@ -215,8 +232,11 @@ }; &rcar_sound { + /* Multi DAI */ + #sound-dai-cells = <1>; + ports { - /* rsnd_port0 is on salvator-common */ + /* rsnd_port0 is in agl-refhw-common */ rsnd_port1: port@1 { reg = <1>; rsnd_endpoint1: endpoint { @@ -231,14 +251,15 @@ }; rsnd_port2: port@2 { reg = <2>; - rsnd_endpoint2: endpoint { - remote-endpoint = <&dw_hdmi1_snd_in>; + rsnd_for_wl18xx: endpoint { + remote-endpoint = <&wl18xx_endpoint>; - dai-format = "i2s"; - bitclock-master = <&rsnd_endpoint2>; - frame-master = <&rsnd_endpoint2>; + simple-audio-card,format = "i2s"; + bitclock-master = <&wl18xx_endpoint>; + frame-master = <&wl18xx_endpoint>; - playback = <&ssi3>; + playback = <&ssi7>; + capture = <&ssi8>; }; }; }; @@ -373,11 +394,40 @@ }; &sdhi3 { - /delete-property/ wp-gpios; - non-removable; + status = "okay"; + + max-frequency = <50000000>; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; + interrupt-parent = <&gpio1>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + }; }; &gpio6 { + /* + * Enable WLAN_PWR_EN right from boot to get reliable BT + * initialization, as doing it at SDHI initialization + * does not seem to do so, no matter how much BT_EN is + * delayed. + * + * This is perhaps not ideal per the requirements described + * in the "Level Shifting WL18xx/WL18xxMOD/WL18xxQ I/Os" + * document (SWRA448A)[1], but the BT UART seems unusable + * otherwise. + * + * [1] https://www.ti.com/lit/an/swra448a/swra448a.pdf + */ + wlan-pwr-en { + gpio-hog; + gpios = <9 GPIO_ACTIVE_HIGH>; + output-high; + }; + /* Enable the CAN 1 & 2 transceivers */ can-1-transceiver-stb { gpio-hog;