Add AGL reference hardware support Upstream-Status: pending Signed-off-by: Scott Murray Signed-off-by: Raquel Medina --- arch/arm64/boot/dts/renesas/agl-refhw-common.dtsi | 918 ++++++++++++++++++++++ arch/arm64/boot/dts/renesas/r8a77951-agl-refhw.dts | 392 +++++++++ drivers/media/i2c/adv748x/adv748x-core.c | 24 +- 3 files changed, 1333 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/renesas/agl-refhw-common.dtsi b/arch/arm64/boot/dts/renesas/agl-refhw-common.dtsi new file mode 100644 index 000000000000..796ac4c078e0 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/agl-refhw-common.dtsi @@ -0,0 +1,918 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for common parts of AGL Reference Hardware board variants + * + * Copyright (C) 2015-2017 Renesas Electronics Corp. + * Copyright (C) 2020 Konsulko Group + */ + +/* + * This file is derived from salvator-common.dtsi + * + * It is currently unclear if the modifications made are such that they could + * be done on top of salvator-common.dtsi to allow removing the duplication. + * It is likely that the common pieces with salvator-common.dtsi would need to + * be factored out into a new common file, which is perhaps hard to justify. + */ + +/* + * SSI-AK4613 + * + * This command is required when Playback/Capture + * + * amixer set "DVC Out" 100% + * amixer set "DVC In" 100% + * + * You can use Mute + * + * amixer set "DVC Out Mute" on + * amixer set "DVC In Mute" on + * + * You can use Volume Ramp + * + * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps" + * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps" + * amixer set "DVC Out Ramp" on + * aplay xxx.wav & + * amixer set "DVC Out" 80% // Volume Down + * amixer set "DVC Out" 100% // Volume Up + */ + +#include + +/ { + aliases { + serial0 = &scif2; + serial1 = &scif1; + serial2 = &scif5; + serial3 = &hscif1; + serial4 = &hscif0; + serial5 = &hscif2; + ethernet0 = &avb; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + stdout-path = "serial0:115200n8"; + }; + + audio_clkout: audio-clkout { + /* + * This is same as <&rcar_sound 0> + * but needed to avoid cs2000/rcar_sound probe dead-lock + */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12288000>; + }; + + avb-mch@ec5a0100 { + compatible = "renesas,avb-mch-gen3"; + reg = <0 0xec5a0100 0 0x100>; /* ADG_AVB */ + reg-name = "adg_avb"; + + clocks = <&cpg CPG_MOD 922>; + clock-names = "adg"; + resets = <&cpg 922>; + }; + + hdmi0-in { + compatible = "hdmi-connector"; + label = "HDMI0 IN"; + type = "a"; + + port { + hdmi_in_con: endpoint { + remote-endpoint = <&adv7481_hdmi>; + }; + }; + }; + + hdmi2-in { + compatible = "hdmi-connector"; + label = "HDMI2 IN"; + type = "a"; + + port { + hdmi_in_con2: endpoint { + remote-endpoint = <&adv7481_hdmi2>; + }; + }; + }; + + reg_1p8v: regulator0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_3p3v: regulator1 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_12v: regulator2 { + compatible = "regulator-fixed"; + regulator-name = "fixed-12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-boot-on; + regulator-always-on; + }; + + sound_card: sound { + compatible = "audio-graph-card"; + + label = "ak4613"; + + dais = <&rsnd_port0>; + }; + + vcc_sdhi0: regulator-vcc-sdhi0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi0: regulator-vccq-sdhi0 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + + vcc_sdhi3: regulator-vcc-sdhi3 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI3 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + vccq_sdhi3: regulator-vccq-sdhi3 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI3 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + + hdmi0-out { + compatible = "hdmi-connector"; + label = "HDMI0 OUT"; + type = "a"; + + port { + hdmi0_con: endpoint { + }; + }; + }; + + hdmi1-out { + compatible = "hdmi-connector"; + label = "HDMI1 OUT"; + type = "a"; + + port { + hdmi1_con: endpoint { + }; + }; + }; + + x12_clk: x12 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; + + /* External DU dot clocks */ + x21_clk: x21-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <33000000>; + }; + + x22_clk: x22-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <33000000>; + }; + + x23_clk: x23-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; +}; + +&a57_0 { + cpu-supply = <&dvfs>; +}; + +&audio_clk_a { + clock-frequency = <22579200>; +}; + +&avb { + pinctrl-0 = <&avb_pins>; + pinctrl-names = "default"; + phy-handle = <&phy0>; + phy-mode = "rgmii-txid"; + status = "okay"; + + phy0: ethernet-phy@0 { + rxc-skew-ps = <1500>; + reg = <0>; + interrupt-parent = <&gpio2>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; + }; +}; + +&csi40 { + status = "okay"; + + ports { + port@0 { + reg = <0>; + + csi40_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&adv7481_txa>; + }; + }; + }; +}; + +&csi41 { + status = "okay"; + + ports { + port@0 { + reg = <0>; + + csi41_in: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&adv7481_txa2>; + }; + }; + }; +}; + +&du { + status = "okay"; + +}; + +&ehci0 { + dr_mode = "otg"; + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&extalr_clk { + clock-frequency = <32768>; +}; + +&hscif0 { + pinctrl-0 = <&hscif0_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + status = "okay"; +}; + +&hscif1 { + pinctrl-0 = <&hscif1_pins>; + pinctrl-names = "default"; + + /* Please use exclusively to the scif1 node */ + status = "okay"; +}; + +&hscif2 { + pinctrl-0 = <&hscif2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&hsusb { + dr_mode = "otg"; + status = "okay"; +}; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + status = "okay"; + + clock-frequency = <100000>; + + video-receiver@70 { + compatible = "adi,adv7481"; + reg = <0x70 0x26 0x22 0x34 0x36 0x32 + 0x31 0x30 0x41 0x79 0x4a 0x48>; + reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater", + "infoframe", "cbus", "cec", "sdp", "txa", "txb" ; + + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&gpio0>; + interrupt-names = "intrq1", "intrq3"; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>, + <5 IRQ_TYPE_LEVEL_LOW>; + + port@8 { + reg = <8>; + + adv7481_hdmi: endpoint { + remote-endpoint = <&hdmi_in_con>; + }; + }; + + port@a { + reg = <10>; + + adv7481_txa: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi40_in>; + }; + }; + + }; + + video-receiver@71 { + compatible = "adi,adv7481"; + reg = <0x71 0x27 0x23 0x35 0x37 0x33 + 0x28 0x29 0x42 0x78 0x4b 0x49>; + reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater", + "infoframe", "cbus", "cec", "sdp", "txa", "txb" ; + + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&gpio6>; + interrupt-names = "intrq1", "intrq3"; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>, + <1 IRQ_TYPE_LEVEL_LOW>; + + port@8 { + reg = <8>; + + adv7481_hdmi2: endpoint { + remote-endpoint = <&hdmi_in_con2>; + }; + }; + + port@a { + reg = <10>; + + adv7481_txa2: endpoint { + clock-lanes = <0>; + data-lanes = <1 2 3 4>; + remote-endpoint = <&csi41_in>; + }; + }; + }; + + cs2000: clk_multiplier@4f { + #clock-cells = <0>; + compatible = "cirrus,cs2000-cp"; + reg = <0x4f>; + clocks = <&audio_clkout>, <&x12_clk>; + clock-names = "clk_in", "ref_clk"; + + assigned-clocks = <&cs2000>; + assigned-clock-rates = <24576000>; /* 1/1 divide */ + }; +}; + +&i2c3 { + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + + status = "okay"; + + clock-frequency = <100000>; + + asm330lhh@6a { + compatible = "st,asm330lhh"; + reg = <0x6a>; + + interrupt-names = "int1", "int2"; + interrupts = <&gpio6 23 IRQ_TYPE_EDGE_RISING>, + <&gpio2 6 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&i2c4 { + status = "okay"; + + versaclock5: clock-generator@68 { + compatible = "idt,9fgv0841"; + reg = <0x68>; + #clock-cells = <1>; + clocks = <&x23_clk>; + clock-names = "xin"; + }; +}; + +&i2c5 { + pinctrl-0 = <&i2c5_pins>; + pinctrl-names = "default"; + + status = "okay"; + + clock-frequency = <100000>; + + ak4613: codec@10 { + compatible = "asahi-kasei,ak4613"; + #sound-dai-cells = <0>; + reg = <0x10>; + clocks = <&rcar_sound 3>; + + asahi-kasei,in1-single-end; + asahi-kasei,in2-single-end; + asahi-kasei,out1-single-end; + asahi-kasei,out2-single-end; + asahi-kasei,out3-single-end; + asahi-kasei,out4-single-end; + asahi-kasei,out5-single-end; + asahi-kasei,out6-single-end; + + port { + ak4613_endpoint: endpoint { + remote-endpoint = <&rsnd_endpoint0>; + }; + }; + }; +}; + +&i2c_dvfs { + status = "okay"; + + clock-frequency = <400000>; + + pmic: pmic@30 { + pinctrl-0 = <&irq0_pins>; + pinctrl-names = "default"; + + compatible = "rohm,bd9571mwv"; + reg = <0x30>; + interrupt-parent = <&intc_ex>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + rohm,ddr-backup-power = <0xf>; + rohm,rstbmode-level; + + regulators { + dvfs: dvfs { + regulator-name = "dvfs"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1030000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + eeprom@50 { + compatible = "rohm,br24t01", "atmel,24c01"; + reg = <0x50>; + pagesize = <8>; + }; +}; + +&ohci0 { + dr_mode = "otg"; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pcie_bus_clk { + clock-frequency = <100000000>; + status = "okay"; +}; + +&pciec0 { + status = "okay"; +}; + +&pciec1 { + status = "okay"; +}; + +&canfd { + pinctrl-0 = <&canfd0_pins &canfd1_pins>; + pinctrl-names = "default"; + + status = "okay"; + + channel0 { + status = "okay"; + }; + + channel1 { + status = "okay"; + }; +}; + +&pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + + avb_pins: avb { + mux { + groups = "avb_link", "avb_mdio", "avb_mii"; + function = "avb"; + }; + + pins_mdio { + groups = "avb_mdio"; + drive-strength = <24>; + }; + + pins_mii_tx { + pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0", + "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3"; + drive-strength = <12>; + }; + }; + + hscif0_pins: hscif0 { + groups = "hscif0_data", "hscif0_ctrl"; + function = "hscif0"; + }; + + hscif1_pins: hscif1 { + groups = "hscif1_data_a"; + function = "hscif1"; + }; + + hscif2_pins: hscif2 { + groups = "hscif2_data_c"; + function = "hscif2"; + }; + + i2c2_pins: i2c2 { + groups = "i2c2_a"; + function = "i2c2"; + }; + + i2c3_pins: i2c3 { + groups = "i2c3"; + function = "i2c3"; + }; + + i2c5_pins: i2c5 { + groups = "i2c5"; + function = "i2c5"; + }; + + irq0_pins: irq0 { + groups = "intc_ex_irq0"; + function = "intc_ex"; + }; + + scif1_pins: scif1 { + groups = "scif1_data_b"; + function = "scif1"; + }; + + scif2_pins: scif2 { + groups = "scif2_data_a"; + function = "scif2"; + }; + + scif5_pins: scif5 { + groups = "scif5_data_a"; + function = "scif5"; + }; + + scif_clk_pins: scif_clk { + groups = "scif_clk_a"; + function = "scif_clk"; + }; + + sdhi0_pins: sd0 { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <3300>; + }; + + sdhi0_pins_uhs: sd0_uhs { + groups = "sdhi0_data4", "sdhi0_ctrl"; + function = "sdhi0"; + power-source = <1800>; + }; + + sdhi2_pins: sd2 { + groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds"; + function = "sdhi2"; + power-source = <3300>; + }; + + sdhi2_pins_uhs: sd2_uhs { + groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds"; + function = "sdhi2"; + power-source = <1800>; + }; + + sdhi3_pins: sd3 { + groups = "sdhi3_data4", "sdhi3_ctrl"; + function = "sdhi3"; + power-source = <3300>; + }; + + sdhi3_pins_uhs: sd3_uhs { + groups = "sdhi3_data4", "sdhi3_ctrl"; + function = "sdhi3"; + power-source = <1800>; + }; + + sound_pins: sound { + groups = "ssi349_ctrl", "ssi3_data", "ssi4_data"; + function = "ssi"; + }; + + sound_clk_pins: sound_clk { + groups = "audio_clk_a_a", "audio_clk_b_a", + "audio_clkout_a", "audio_clkout3_b"; + function = "audio_clk"; + }; + + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; + }; + + usb1_pins: usb1 { + groups = "usb1_ovc"; + function = "usb1"; + }; + + usb30_pins: usb30 { + groups = "usb30", "usb30_ovc"; + function = "usb30"; + }; + + canfd0_pins: canfd0 { + groups = "canfd0_data_a"; + function = "canfd0"; + }; + + canfd1_pins: canfd1 { + groups = "canfd1_data"; + function = "canfd1"; + }; +}; + +&rcar_sound { + pinctrl-0 = <&sound_pins &sound_clk_pins>; + pinctrl-names = "default"; + + /* Single DAI */ + #sound-dai-cells = <0>; + + /* audio_clkout0/1/2/3 */ + #clock-cells = <1>; + clock-frequency = <12288000 11289600>; + + status = "okay"; + + /* update to */ + clocks = <&cpg CPG_MOD 1005>, + <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>, + <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>, + <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>, + <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>, + <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>, + <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>, + <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>, + <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>, + <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>, + <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>, + <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>, + <&audio_clk_a>, <&cs2000>, + <&audio_clk_c>, + <&cpg CPG_CORE CPG_AUDIO_CLK_I>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + rsnd_port0: port@0 { + reg = <0>; + rsnd_endpoint0: endpoint { + remote-endpoint = <&ak4613_endpoint>; + + dai-format = "left_j"; + bitclock-master = <&rsnd_endpoint0>; + frame-master = <&rsnd_endpoint0>; + + playback = <&ssi3>; //ssi0 -> ssi3 + capture = <&ssi4>; //ssi1 -> ssi4 + }; + }; + }; +}; + +&rwdt { + timeout-sec = <60>; + status = "okay"; +}; + +&scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + /* Please use exclusively to the hscif1 node */ + status = "okay"; +}; + +&scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif5 { + pinctrl-0 = <&scif5_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif_clk { + clock-frequency = <14745600>; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-1 = <&sdhi0_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&sdhi2 { + /* used for on-board 8bit eMMC */ + pinctrl-0 = <&sdhi2_pins>; + pinctrl-1 = <&sdhi2_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + iommus = <&ipmmu_ds1 34>; + + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + bus-width = <8>; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + no-sd; + no-sdio; + non-removable; + fixed-emmc-driver-type = <1>; + status = "okay"; +}; + +&sdhi3 { + pinctrl-0 = <&sdhi3_pins>; + pinctrl-1 = <&sdhi3_pins_uhs>; + pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&vcc_sdhi3>; + vqmmc-supply = <&vccq_sdhi3>; + cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + bus-width = <4>; + sd-uhs-sdr50; + sd-uhs-sdr104; + status = "okay"; +}; + +&ssi4 { + shared-pin; +}; + +&usb_extal_clk { + clock-frequency = <50000000>; +}; + +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&usb2_phy1 { + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&usb3_peri0 { + phys = <&usb3_phy0>; + phy-names = "usb"; + + status = "okay"; +}; + +&usb3_phy0 { + status = "okay"; +}; + +&usb3s0_clk { + clock-frequency = <100000000>; +}; + +&vin0 { + status = "okay"; +}; + +&vin1 { + status = "okay"; +}; + +&vin2 { + status = "okay"; +}; + +&vin3 { + status = "okay"; +}; + +&vin4 { + status = "okay"; +}; + +&vin5 { + status = "okay"; +}; + +&vin6 { + status = "okay"; +}; + +&vin7 { + status = "okay"; +}; + +&xhci0 { + pinctrl-0 = <&usb30_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a77951-agl-refhw.dts b/arch/arm64/boot/dts/renesas/r8a77951-agl-refhw.dts new file mode 100644 index 000000000000..83638a6228c0 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a77951-agl-refhw.dts @@ -0,0 +1,392 @@ +/* + * Device Tree Source for the AGL reference hardware board with R-Car H3 ES3.0 + * + * Copyright (C) 2019 Panasonic Corp. + * Copyright (C) 2020 Konsulko Group + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/* + * This file is for the most part derived from: + * + * - r8a7795-salvator-xs-4x2g.dts + * - r8a7795-salvator-xs.dts + * - salvator-xs.dtsi + * + * With agl-refhw-common.dtsi replacing (and derived from) salvator-common.dtsi. + */ + +/dts-v1/; +#include "r8a77951.dtsi" +#include "agl-refhw-common.dtsi" + +/ { + model = "AGL Reference Hardware based on r8a77951 ES3.0+ with 8GiB (4 x 2 GiB)"; + compatible = "agl,refhw-h3", "renesas,r8a7795"; + + memory@48000000 { + device_type = "memory"; + /* first 128MB is reserved for secure area. */ + reg = <0x0 0x48000000 0x0 0x78000000>; + }; + + memory@500000000 { + device_type = "memory"; + reg = <0x5 0x00000000 0x0 0x80000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x80000000>; + }; + + memory@700000000 { + device_type = "memory"; + reg = <0x7 0x00000000 0x0 0x80000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* device specific region for Lossy Decompression */ + lossy_decompress: linux,lossy_decompress@54000000 { + no-map; + reg = <0x00000000 0x54000000 0x0 0x03000000>; + }; + + /* For Audio DSP */ + adsp_reserved: linux,adsp@57000000 { + compatible = "shared-dma-pool"; + reusable; + reg = <0x00000000 0x57000000 0x0 0x01000000>; + }; + + /* global autoconfigured region for contiguous allocations */ + linux,cma@58000000 { + compatible = "shared-dma-pool"; + reusable; + reg = <0x00000000 0x58000000 0x0 0x18000000>; + linux,cma-default; + }; + + /* device specific region for contiguous allocations */ + mmp_reserved: linux,multimedia@70000000 { + compatible = "shared-dma-pool"; + reusable; + reg = <0x00000000 0x70000000 0x0 0x10000000>; + }; + }; + + mmngr { + compatible = "renesas,mmngr"; + memory-region = <&mmp_reserved>, <&lossy_decompress>; + }; + + mmngrbuf { + compatible = "renesas,mmngrbuf"; + }; + + vspm_if { + compatible = "renesas,vspm_if"; + }; + + vga { + port { + vga_in: endpoint { + /delete-property/remote-endpoint; + }; + }; + }; + + vga-encoder { + ports { + port@0 { + adv7123_in: endpoint { + /delete-property/remote-endpoint; + }; + }; + + port@1 { + adv7123_out: endpoint { + /delete-property/remote-endpoint; + }; + }; + }; + }; + +}; + +&adsp { + status = "okay"; + memory-region = <&adsp_reserved>; +}; + +&du { + clocks = <&cpg CPG_MOD 724>, + <&cpg CPG_MOD 723>, + <&cpg CPG_MOD 722>, + <&cpg CPG_MOD 721>, + <&versaclock6 1>, + <&x21_clk>, + <&x22_clk>, + <&versaclock6 2>; + clock-names = "du.0", "du.1", "du.2", "du.3", + "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3"; +}; + +&ehci2 { + status = "okay"; +}; + +&ehci3 { + dr_mode = "otg"; + status = "okay"; +}; + +&hsusb3 { + dr_mode = "otg"; + status = "okay"; +}; + +&sound_card { + dais = <&rsnd_port0 /* ak4613 */ + &rsnd_port1 /* HDMI0 */ + &rsnd_port2>; /* HDMI1 */ +}; + +&hdmi0 { + status = "okay"; + + ports { + port@1 { + reg = <1>; + rcar_dw_hdmi0_out: endpoint { + remote-endpoint = <&hdmi0_con>; + }; + }; + port@2 { + reg = <2>; + dw_hdmi0_snd_in: endpoint { + remote-endpoint = <&rsnd_endpoint1>; + }; + }; + }; +}; + +&hdmi0_con { + remote-endpoint = <&rcar_dw_hdmi0_out>; +}; + +&hdmi1 { + status = "okay"; + + ports { + port@1 { + reg = <1>; + rcar_dw_hdmi1_out: endpoint { + remote-endpoint = <&hdmi1_con>; + }; + }; + port@2 { + reg = <2>; + dw_hdmi1_snd_in: endpoint { + remote-endpoint = <&rsnd_endpoint2>; + }; + }; + }; +}; + +&hdmi1_con { + remote-endpoint = <&rcar_dw_hdmi1_out>; +}; + +&ohci2 { + status = "okay"; +}; + +&ohci3 { + dr_mode = "otg"; + status = "okay"; +}; + +&rcar_sound { + ports { + /* rsnd_port0 is on salvator-common */ + rsnd_port1: port@1 { + reg = <1>; + rsnd_endpoint1: endpoint { + remote-endpoint = <&dw_hdmi0_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint1>; + frame-master = <&rsnd_endpoint1>; + + playback = <&ssi2>; + }; + }; + rsnd_port2: port@2 { + reg = <2>; + rsnd_endpoint2: endpoint { + remote-endpoint = <&dw_hdmi1_snd_in>; + + dai-format = "i2s"; + bitclock-master = <&rsnd_endpoint2>; + frame-master = <&rsnd_endpoint2>; + + playback = <&ssi3>; + }; + }; + }; +}; + +&pfc { + usb2_pins: usb2 { + groups = "usb2", "usb2_ovc"; + function = "usb2"; + }; + + /* + * - On Salvator-X[S], GP6_3[01] are connected to ADV7482 as irq pins + * (when SW31 is the default setting on Salvator-XS). + * - If SW31 is the default setting, you cannot use USB2.0 ch3 on + * r8a77951 with Salvator-XS. + * Hence the SW31 setting must be changed like 2) below. + * 1) Default setting of SW31: ON-ON-OFF-OFF-OFF-OFF: + * - Connect GP6_3[01] to ADV7842. + * 2) Changed setting of SW31: OFF-OFF-ON-ON-ON-ON: + * - Connect GP6_3[01] to BD082065 (USB2.0 ch3's host power). + * - Connect GP6_{04,21} to ADV7842. + */ + usb2_ch3_pins: usb2_ch3 { + groups = "usb2_ch3"; + function = "usb2_ch3"; + }; +}; + +&usb2_phy2 { + pinctrl-0 = <&usb2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&usb2_phy3 { + pinctrl-0 = <&usb2_ch3_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&vspbc { + status = "okay"; +}; + +&vspbd { + status = "okay"; +}; + +&vspi0 { + status = "okay"; +}; + +&vspi1 { + status = "okay"; +}; + +/* End r8a7795-salvator-xs.dts content */ + + +/* Start r8a7795-salvator-xs-4x2g.dts content */ + +&pciec0 { + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; +}; + +&pciec1 { + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; +}; + +/* End r8a7795-salvator-xs-4x2g.dts content */ + + +/* Start salvator-xs.dts content */ + +&extal_clk { + clock-frequency = <16640000>; +}; + +&i2c4 { + clock-frequency = <400000>; + + versaclock6: clock-generator@6a { + compatible = "idt,5p49v6901"; + reg = <0x6a>; + #clock-cells = <1>; + clocks = <&x23_clk>; + clock-names = "xin"; + }; +}; + +/* End salvator-xs.dts content */ + + +/* Start reference hardware specific tweaks */ + +&du { + ports { + port@0 { + endpoint { + /delete-property/remote-endpoint; + }; + }; + + port@3 { + endpoint { + /delete-property/remote-endpoint; + }; + }; + }; +}; + +&lvds0 { + status = "disabled"; +}; + +&pwm1 { + status = "disabled"; +}; + +&scif_clk { + clock-frequency = <0>; +}; + +&sdhi0 { + /delete-property/ wp-gpios; + non-removable; +}; + +&sdhi3 { + /delete-property/ wp-gpios; + non-removable; +}; + +&gpio6 { + /* Enable the CAN 1 & 2 transceivers */ + can-1-transceiver-stb { + gpio-hog; + gpios = <21 GPIO_ACTIVE_HIGH>; + output-high; + }; + can-2-transceiver-stb { + gpio-hog; + gpios = <12 GPIO_ACTIVE_HIGH>; + output-high; + }; +}; diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c index 87092ce5ba73..357c334113aa 100644 --- a/drivers/media/i2c/adv748x/adv748x-core.c +++ b/drivers/media/i2c/adv748x/adv748x-core.c @@ -97,6 +97,21 @@ static const struct adv748x_register_map adv748x_default_addresses[] = { [ADV748X_PAGE_TXA] = { "txa", 0x4a }, }; +static const struct adv748x_register_map adv748x_default_addresses2[] = { + [ADV748X_PAGE_IO] = { "main", 0x71 }, + [ADV748X_PAGE_DPLL] = { "dpll", 0x27 }, + [ADV748X_PAGE_CP] = { "cp", 0x23 }, + [ADV748X_PAGE_HDMI] = { "hdmi", 0x35 }, + [ADV748X_PAGE_EDID] = { "edid", 0x37 }, + [ADV748X_PAGE_REPEATER] = { "repeater", 0x33 }, + [ADV748X_PAGE_INFOFRAME] = { "infoframe", 0x28 }, + [ADV748X_PAGE_CBUS] = { "cbus", 0x29 }, + [ADV748X_PAGE_CEC] = { "cec", 0x42 }, + [ADV748X_PAGE_SDP] = { "sdp", 0x78 }, + [ADV748X_PAGE_TXB] = { "txb", 0x49 }, + [ADV748X_PAGE_TXA] = { "txa", 0x4b }, +}; + static int adv748x_read_check(struct adv748x_state *state, int client_page, u8 reg) { @@ -183,10 +198,17 @@ static int adv748x_initialise_clients(struct adv748x_state *state) int ret; for (i = ADV748X_PAGE_DPLL; i < ADV748X_PAGE_MAX; ++i) { - state->i2c_clients[i] = i2c_new_ancillary_device( + if ((state->client->addr << 1) == 0xe0) { + state->i2c_clients[i] = i2c_new_ancillary_device( state->client, adv748x_default_addresses[i].name, adv748x_default_addresses[i].default_addr); + } else { + state->i2c_clients[i] = i2c_new_ancillary_device( + state->client, + adv748x_default_addresses2[i].name, + adv748x_default_addresses2[i].default_addr); + } if (IS_ERR(state->i2c_clients[i])) { adv_err(state, "failed to create i2c client %u\n", i);