new configuration templates based on fragments

This is the application of the process proposed here:
https://lists.linuxfoundation.org/pipermail/automotive-discussions/2016-June/002232.html

Bug-AGL: SPEC-180

Change-Id: I5a7015fa810547a9ecf4fb096367323af3cdc670
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>

53 files changed, 696 insertions, 2188 deletions

diff --git a/templates/base/00_local.conf.agl.inc b/templates/base/00_local.conf.agl.inc
new file mode 100644
index 000000000..b0ed06be4
--- /dev/null
+++ b/templates/base/00_local.conf.agl.inc
@@ -0,0 +1,18 @@
+# AGL global configuration options
+#---------------------------------
+
+# Set DISTRO for AGL
+DISTRO = "poky-agl"
+
+# AGL includes all kernel modules here for ease-of-use during development.
+# Comment this out to be able to select the kernel modules yourself.
+IMAGE_INSTALL_append = " kernel-modules"
+
+# Likewise as we included all kernel modules by default in the filesystem,
+# we do not need a separate tarball stored.
+# Comment this out to receive the separate modules tarball again.
+MODULE_TARBALL_DEPLOY ?= "0"
+
+# Comment out below if want to use QtWebkit
+PACKAGECONFIG_remove_pn-qtquick1 = "webkit"
+
diff --git a/templates/base/01_setup_EULAfunc.sh b/templates/base/01_setup_EULAfunc.sh
new file mode 100644
index 000000000..7b1ca870d
--- /dev/null
+++ b/templates/base/01_setup_EULAfunc.sh
@@ -0,0 +1,83 @@
+find_and_ack_eula() {
+    # Handle EULA , if needed. This is a generic method to handle BSPs
+    # that might (or not) come with a EULA. If a machine has a EULA, we
+    # assume that its corresponding layers has conf/EULA/$MACHINE file
+    # with the EULA text, which we will display to the user and request
+    # for acceptance. If accepted, the variable ACCEPT_EULA_$MACHINE is
+    # set to 1 in local.conf, which can later be used by the BSP.
+    # If the env variable EULA_$MACHINE is set it is used by default,
+    # without prompting the user.
+    # FIXME: there is a potential issue if the same $MACHINE is set in more than one layer.. but we should assert that earlier
+    EULA=$(find $1 -print | grep "conf/eula/$MACHINE" | grep -v scripts | grep -v openembedded-core || true)
+    if [ -n "$EULA" ]; then
+        # remove '-' since we are constructing a bash variable name here
+        EULA_MACHINE="EULA_$(echo $MACHINE | sed 's/-//g')"
+        # NOTE: indirect reference / dynamic variable
+        if [ -n "${!EULA_MACHINE}" ]; then
+            # the EULA_$MACHINE variable is set in the environment, so we just configure
+            # ACCEPT_EULA_$MACHINE in local.conf
+            EULA_ACCEPT=${!EULA_MACHINE}
+        else
+            # so we need to ask user if he/she accepts the EULA:
+            cat <<EOF
+The BSP for $MACHINE depends on packages and firmware which are covered by an 
+End User License Agreement (EULA). To have the right to use these binaries
+in your images, you need to read and accept the following...
+
+The firmware package can contains several types
+of firmware (depending on BSP):
+
+* bootloaders: the first stage bootloaders are proprietary for this
+  board, they are included in this firmware package.
+* firmware for the power management 'companion' core: on QCOM SoC some
+  power management features are implemented in a companion core , called
+  RPM, and not on the main CPU.
+* firmware for GPU, WLAN, DSP/GPS and video codecs. These firmware are
+  used by their respective linux drivers (DRM, wlan, v4l2, .. ) and are
+  loaded on-demand by the main CPU onto the various cores on the SoC.
+EOF
+
+            echo
+            REPLY=
+            while [ -z "$REPLY" ]; do
+                echo -n "Do you read the EULA ? (y/n) "
+                read REPLY
+                case "$REPLY" in
+                    y|Y)
+                        READ_EULA=1
+                        ;;
+                    n|N)
+                        READ_EULA=0
+                        ;;
+                    *)
+                        REPLY=
+                        ;;
+                esac
+            done
+
+            if [ "$READ_EULA" == 1 ]; then
+                more -d ${EULA}
+                echo
+                REPLY=
+                while [ -z "$REPLY" ]; do
+                    echo -n "Do you accept the EULA you just read? (y/n) "
+                    read REPLY
+                    case "$REPLY" in
+                        y|Y)
+                            echo "EULA has been accepted."
+                            EULA_ACCEPT=1
+                            ;;
+                        n|N)
+                            echo "EULA has not been accepted."
+                            ;;
+                        *)
+                            REPLY=
+                            ;;
+                    esac
+                done
+            fi
+        fi
+    fi
+}
+
+EULA_ACCEPT=0
diff --git a/templates/base/99_setup_EULAconf.sh b/templates/base/99_setup_EULAconf.sh
new file mode 100644
index 000000000..fe65f4ea6
--- /dev/null
+++ b/templates/base/99_setup_EULAconf.sh
@@ -0,0 +1,10 @@
+case "$EULA_ACCEPT" in
+	1)
+		echo "" >> $BUILDDIR/conf/local.conf
+		echo "# EULA" >> $BUILDDIR/conf/local.conf
+		echo "ACCEPT_EULA_$MACHINE = \"1\"" >> $BUILDDIR/conf/local.conf
+		;;
+	*)
+		;;
+esac
+
diff --git a/templates/base/bblayers.conf.sample b/templates/base/bblayers.conf.sample
new file mode 100644
index 000000000..313a58208
--- /dev/null
+++ b/templates/base/bblayers.conf.sample
@@ -0,0 +1,55 @@
+# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+LCONF_VERSION = "6"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+# Convenience variables usable in various configuration fragments
+#----------------------------------
+BCONFDIR := "${@os.path.abspath(os.path.dirname(d.getVar('FILE', True)))}"
+METADIR  := "${@os.path.abspath('##OEROOT##/..')}"
+
+# These are the core OE + YP Layers
+#----------------------------------
+YOCTO_LAYERS = " \
+  ${METADIR}/poky/meta \
+  ${METADIR}/poky/meta-yocto \
+  ${METADIR}/poky/meta-yocto-bsp \
+  "
+
+# These are the AGL CORE Layers that make up the basis
+# - they create a minimal bootable filesystem
+#   with some automotive tools/libraries
+#-----------------------------------------------------
+AGL_CORE_LAYERS = " \
+  ${METADIR}/meta-agl/meta-ivi-common \
+  ${METADIR}/meta-agl/meta-agl \
+  ${METADIR}/meta-agl/meta-agl-bsp \
+  "
+
+# These are the direct dependencies of the AGL CORE Layers
+#---------------------------------------------------------
+AGL_CORE_DEPENDENCY_LAYERS = " \
+  ${METADIR}/meta-openembedded/meta-oe \
+  ${METADIR}/meta-openembedded/meta-multimedia \
+  ${METADIR}/meta-openembedded/meta-efl \
+  ${METADIR}/meta-openembedded/meta-networking \
+  ${METADIR}/meta-openembedded/meta-python \
+  "
+
+####################
+# Combine the layers
+BBLAYERS ?= " \
+  ${AGL_CORE_DEPENDENCY_LAYERS} \
+  ${AGL_CORE_LAYERS} \
+  ${YOCTO_LAYERS} \
+  "
+
+BBLAYERS_NON_REMOVABLE ?= " \
+  ${METADIR}/poky/meta \
+  ${METADIR}/poky/meta-yocto \
+  ${METADIR}//meta-agl/meta-agl \
+  "
+
+
diff --git a/templates/base/conf-notes.txt b/templates/base/conf-notes.txt
new file mode 100644
index 000000000..d4ca1bce2
--- /dev/null
+++ b/templates/base/conf-notes.txt
@@ -0,0 +1,13 @@
+Common targets are:
+  - meta-agl:          (core system)
+    agl-image-ivi
+    agl-image-ivi-crosssdk
+    agl-image-ivi-qa
+    agl-image-minimal
+    agl-image-minimal-qa
+    agl-image-weston
+
+  - meta-agl-demo:     (demo with UI)
+    agl-demo-platform  (* default demo target)
+    agl-demo-platform-qa
+    agl-demo-platform-crosssdk
diff --git a/templates/raspberrypi3/conf/local.conf.sample b/templates/base/local.conf.sample
index 0efce617e..72c16b25d 100644
--- a/templates/raspberrypi3/conf/local.conf.sample
+++ b/templates/base/local.conf.sample
@@ -1,22 +1,12 @@
 #
-# AGL
-#####
-
-MACHINE = "raspberrypi3"
-
-#
-# END AGL
-#########
-
-#
 # This file is your local configuration file and is where all local user settings
 # are placed. The comments in this file give some guide to the options a new user
 # to the system might want to change but pretty much any configuration option can
-# be set in this file. More adventurous users can look at local.conf.extended
+# be set in this file. More adventurous users can look at local.conf.extended 
 # which contains other examples of configuration which can be placed in this file
 # but new users likely won't need any of them initially.
 #
-# Lines starting with the '#' character are commented out and in some cases the
+# Lines starting with the '#' character are commented out and in some cases the 
 # default values are provided as comments to show people example syntax. Enabling
 # the option is a question of removing the # character and making any change to the
 # variable as required.
@@ -28,12 +18,13 @@ MACHINE = "raspberrypi3"
 # of emulated machines available which can boot and run in the QEMU emulator:
 #
 #MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
 #MACHINE ?= "qemumips"
 #MACHINE ?= "qemuppc"
 #MACHINE ?= "qemux86"
 #MACHINE ?= "qemux86-64"
 #
-# There are also the following hardware board target machines included for
+# There are also the following hardware board target machines included for 
 # demonstration purposes:
 #
 #MACHINE ?= "beaglebone"
@@ -43,7 +34,7 @@ MACHINE = "raspberrypi3"
 #MACHINE ?= "edgerouter"
 #
 # This sets the default machine to be qemux86 if no other machine is selected:
-MACHINE ??= "qemux86-64"
+MACHINE ??= "qemux86"
 
 #
 # Where to place downloads
@@ -91,13 +82,12 @@ MACHINE ??= "qemux86-64"
 #
 # The distribution setting controls which policy settings are used as defaults.
 # The default value is fine for general Yocto project use, at least initially.
-# Ultimately when creating custom policy, people will likely end up subclassing
+# Ultimately when creating custom policy, people will likely end up subclassing 
 # these defaults.
 #
-#DISTRO ?= "poky"
-DISTRO ?= "poky-agl"
+DISTRO ?= "poky"
 # As an example of a subclass there is a "bleeding" edge policy configuration
-# where many versions are set to the absolute latest code from the upstream
+# where many versions are set to the absolute latest code from the upstream 
 # source control systems. This is just mentioned here as an example, its not
 # useful to most new users.
 # DISTRO ?= "poky-bleeding"
@@ -105,8 +95,8 @@ DISTRO ?= "poky-agl"
 #
 # Package Management configuration
 #
-# This variable lists which packaging formats to enable. Multiple package backends
-# can be enabled at once and the first item listed in the variable will be used
+# This variable lists which packaging formats to enable. Multiple package backends 
+# can be enabled at once and the first item listed in the variable will be used 
 # to generate the root filesystems.
 # Options are:
 #  - 'package_deb' for debian style deb files
@@ -120,7 +110,7 @@ PACKAGE_CLASSES ?= "package_rpm"
 # SDK/ADT target architecture
 #
 # This variable specifies the architecture to build SDK/ADT items for and means
-# you can build the SDK packages for architectures other than the machine you are
+# you can build the SDK packages for architectures other than the machine you are 
 # running the build on (i.e. building i686 packages on an x86_64 host).
 # Supported values are i686 and x86_64
 #SDKMACHINE ?= "i686"
@@ -128,7 +118,7 @@ PACKAGE_CLASSES ?= "package_rpm"
 #
 # Extra image configuration defaults
 #
-# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated 
 # images. Some of these options are added to certain image types automatically. The
 # variable can contain the following options:
 #  "dbg-pkgs"       - add -dbg packages for all installed packages
@@ -153,7 +143,7 @@ EXTRA_IMAGE_FEATURES = "debug-tweaks"
 # Additional image features
 #
 # The following is a list of additional classes to use when building images which
-# enable extra features. Some available options which can be included in this variable
+# enable extra features. Some available options which can be included in this variable 
 # are:
 #   - 'buildstats' collect build statistics
 #   - 'image-mklibs' to reduce shared library files size for an image
@@ -161,7 +151,9 @@ EXTRA_IMAGE_FEATURES = "debug-tweaks"
 #   - 'image-swab' to perform host system intrusion detection
 # NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
 # NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
-USER_CLASSES ?= "buildstats image-mklibs image-prelink"
+# NOTE: image-prelink is currently broken due to problems with the prelinker.  It is advised
+# that you do NOT run the prelinker at this time. 
+USER_CLASSES ?= "buildstats image-mklibs"
 
 #
 # Runtime testing of images
@@ -174,8 +166,8 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink"
 #
 # Interactive shell configuration
 #
-# Under certain circumstances the system may need input from you and to do this it
-# can launch an interactive shell. It needs to do this since the build is
+# Under certain circumstances the system may need input from you and to do this it 
+# can launch an interactive shell. It needs to do this since the build is 
 # multithreaded and needs to be able to handle the case where more than one parallel
 # process may require the user's attention. The default is iterate over the available
 # terminal types to find one that works.
@@ -198,24 +190,28 @@ PATCHRESOLVE = "noop"
 # shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
 # of the build. The reason for this is that running completely out of space can corrupt
 # files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
 BB_DISKMON_DIRS = "\
     STOPTASKS,${TMPDIR},1G,100K \
     STOPTASKS,${DL_DIR},1G,100K \
     STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
     ABORT,${TMPDIR},100M,1K \
     ABORT,${DL_DIR},100M,1K \
-    ABORT,${SSTATE_DIR},100M,1K"
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
 
 #
 # Shared-state files from other locations
 #
-# As mentioned above, shared state files are prebuilt cache data objects which can
+# As mentioned above, shared state files are prebuilt cache data objects which can 
 # used to accelerate build time. This variable can be used to configure the system
 # to search other mirror locations for these objects before it builds the data itself.
 #
 # This can be a filesystem directory, or a remote url such as http or ftp. These
-# would contain the sstate-cache results from previous builds (possibly from other
-# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# would contain the sstate-cache results from previous builds (possibly from other 
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the 
 # cache locations to check for the shared objects.
 # NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
 # at the end as shown in the examples below. This will be substituted with the
@@ -229,30 +225,12 @@ BB_DISKMON_DIRS = "\
 # Qemu configuration
 #
 # By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. This assumes there is a
-# libsdl library available on your build system.
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
 PACKAGECONFIG_append_pn-qemu-native = " sdl"
 PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-ASSUME_PROVIDED += "libsdl-native"
-
-###############
-#
-# AGL specifics
-#
-###############
-
-# AGL includes all kernel modules here for ease-of-use during development.
-# Comment this out to be able to select the kernel modules yourself.
-IMAGE_INSTALL_append = " kernel-modules"
-
-# Likewise as we included all kernel modules by default in the filesystem,
-# we do not need a separate tarball stored.
-# Comment this out to receive the separate modules tarbal again.
-MODULE_TARBALL_DEPLOY ?= "0"
-
-###############
-# /END AGL
-###############
+#ASSUME_PROVIDED += "libsdl-native"
 
 
 # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
diff --git a/templates/common/conf-notes.txt b/templates/common/conf-notes.txt
deleted file mode 100644
index 45acdf53d..000000000
--- a/templates/common/conf-notes.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-Common targets are:
-    agl-image-ivi
-    agl-image-ivi-crosssdk
-    agl-image-ivi-qa
-
-    agl-image-minimal
-    agl-image-weston
-
diff --git a/templates/dra7xx-evm/conf/bblayers.conf.sample b/templates/dra7xx-evm/conf/bblayers.conf.sample
deleted file mode 100644
index 44338f72f..000000000
--- a/templates/dra7xx-evm/conf/bblayers.conf.sample
+++ /dev/null
@@ -1,29 +0,0 @@
-# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
-# changes incompatibly
-LCONF_VERSION = "6"
-
-BBPATH = "${TOPDIR}"
-BBFILES ?= ""
-
-# AGL layers for TI vayu
-BBLAYERS ?= " \
-  ##OEROOT##/meta \
-  ##OEROOT##/meta-yocto \
-  ##OEROOT##/meta-yocto-bsp \
-  ##OEROOT##/../meta-agl/meta-ivi-common \
-  ##OEROOT##/../meta-agl/meta-agl \
-  ##OEROOT##/../meta-agl/meta-agl-bsp \
-  ##OEROOT##/../meta-openembedded/meta-oe \
-  ##OEROOT##/../meta-openembedded/meta-multimedia \
-  ##OEROOT##/../meta-openembedded/meta-efl \
-  ##OEROOT##/../meta-openembedded/meta-networking \
-  ##OEROOT##/../meta-openembedded/meta-python \
-  ##OEROOT##/../meta-openembedded/meta-filesystems \
-  ##OEROOT##/../meta-ti \
-  ##OEROOT##/../meta-rust \
-  "
-BBLAYERS_NON_REMOVABLE ?= " \
-  ##OEROOT##/meta \
-  ##OEROOT##/meta-yocto \
-  ##OEROOT##/../meta-agl/meta-agl \
-  "
diff --git a/templates/dra7xx-evm/conf/conf-notes.txt b/templates/dra7xx-evm/conf/conf-notes.txt
deleted file mode 120000
index fc5c6a1b8..000000000
--- a/templates/dra7xx-evm/conf/conf-notes.txt
+++ /dev/null
@@ -1 +0,0 @@
-../../common/conf-notes.txt
\ No newline at end of file
diff --git a/templates/dra7xx-evm/conf/local.conf.sample b/templates/dra7xx-evm/conf/local.conf.sample
deleted file mode 100644
index 140a30d72..000000000
--- a/templates/dra7xx-evm/conf/local.conf.sample
+++ /dev/null
@@ -1,265 +0,0 @@
-#
-# AGL
-#####
-
-MACHINE = "dra7xx-evm"
-
-## ATTENTION, this is needed right now to build meta-ti with AGL: ##
-## due to meta-ti being based on YP 1.8 instead of YP 2.0
-BBMASK  = "meta-ti/.*eudev"
-
-#
-# END AGL
-#########
-
-#
-# This file is your local configuration file and is where all local user settings
-# are placed. The comments in this file give some guide to the options a new user
-# to the system might want to change but pretty much any configuration option can
-# be set in this file. More adventurous users can look at local.conf.extended
-# which contains other examples of configuration which can be placed in this file
-# but new users likely won't need any of them initially.
-#
-# Lines starting with the '#' character are commented out and in some cases the
-# default values are provided as comments to show people example syntax. Enabling
-# the option is a question of removing the # character and making any change to the
-# variable as required.
-
-#
-# Machine Selection
-#
-# You need to select a specific machine to target the build with. There are a selection
-# of emulated machines available which can boot and run in the QEMU emulator:
-#
-#MACHINE ?= "qemuarm"
-#MACHINE ?= "qemumips"
-#MACHINE ?= "qemuppc"
-#MACHINE ?= "qemux86"
-#MACHINE ?= "qemux86-64"
-#
-# There are also the following hardware board target machines included for
-# demonstration purposes:
-#
-#MACHINE ?= "beaglebone"
-#MACHINE ?= "genericx86"
-#MACHINE ?= "genericx86-64"
-#MACHINE ?= "mpc8315e-rdb"
-#MACHINE ?= "edgerouter"
-#
-# This sets the default machine to be qemux86 if no other machine is selected:
-MACHINE ??= "qemux86-64"
-
-#
-# Where to place downloads
-#
-# During a first build the system will download many different source code tarballs
-# from various upstream projects. This can take a while, particularly if your network
-# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
-# can preserve this directory to speed up this part of subsequent builds. This directory
-# is safe to share between multiple builds on the same machine too.
-#
-# The default is a downloads directory under TOPDIR which is the build directory.
-#
-#DL_DIR ?= "${TOPDIR}/downloads"
-
-#
-# Where to place shared-state files
-#
-# BitBake has the capability to accelerate builds based on previously built output.
-# This is done using "shared state" files which can be thought of as cache objects
-# and this option determines where those files are placed.
-#
-# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
-# from these files if no changes were made to the configuration. If changes were made
-# to the configuration, only shared state files where the state was still valid would
-# be used (done using checksums).
-#
-# The default is a sstate-cache directory under TOPDIR.
-#
-#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
-
-#
-# Where to place the build output
-#
-# This option specifies where the bulk of the building work should be done and
-# where BitBake should place its temporary files and output. Keep in mind that
-# this includes the extraction and compilation of many applications and the toolchain
-# which can use Gigabytes of hard disk space.
-#
-# The default is a tmp directory under TOPDIR.
-#
-#TMPDIR = "${TOPDIR}/tmp"
-
-#
-# Default policy config
-#
-# The distribution setting controls which policy settings are used as defaults.
-# The default value is fine for general Yocto project use, at least initially.
-# Ultimately when creating custom policy, people will likely end up subclassing
-# these defaults.
-#
-#DISTRO ?= "poky"
-DISTRO ?= "poky-agl"
-# As an example of a subclass there is a "bleeding" edge policy configuration
-# where many versions are set to the absolute latest code from the upstream
-# source control systems. This is just mentioned here as an example, its not
-# useful to most new users.
-# DISTRO ?= "poky-bleeding"
-
-#
-# Package Management configuration
-#
-# This variable lists which packaging formats to enable. Multiple package backends
-# can be enabled at once and the first item listed in the variable will be used
-# to generate the root filesystems.
-# Options are:
-#  - 'package_deb' for debian style deb files
-#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
-#  - 'package_rpm' for rpm style packages
-# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
-# We default to rpm:
-PACKAGE_CLASSES ?= "package_rpm"
-
-#
-# SDK/ADT target architecture
-#
-# This variable specifies the architecture to build SDK/ADT items for and means
-# you can build the SDK packages for architectures other than the machine you are
-# running the build on (i.e. building i686 packages on an x86_64 host).
-# Supported values are i686 and x86_64
-#SDKMACHINE ?= "i686"
-
-#
-# Extra image configuration defaults
-#
-# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
-# images. Some of these options are added to certain image types automatically. The
-# variable can contain the following options:
-#  "dbg-pkgs"       - add -dbg packages for all installed packages
-#                     (adds symbol information for debugging/profiling)
-#  "dev-pkgs"       - add -dev packages for all installed packages
-#                     (useful if you want to develop against libs in the image)
-#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
-#                     (useful if you want to run the package test suites)
-#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
-#  "tools-debug"    - add debugging tools (gdb, strace)
-#  "eclipse-debug"  - add Eclipse remote debugging support
-#  "tools-profile"  - add profiling tools (oprofile, exmap, lttng, valgrind)
-#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
-#  "debug-tweaks"   - make an image suitable for development
-#                     e.g. ssh root access has a blank password
-# There are other application targets that can be used here too, see
-# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
-# We default to enabling the debugging tweaks.
-EXTRA_IMAGE_FEATURES = "debug-tweaks"
-
-#
-# Additional image features
-#
-# The following is a list of additional classes to use when building images which
-# enable extra features. Some available options which can be included in this variable
-# are:
-#   - 'buildstats' collect build statistics
-#   - 'image-mklibs' to reduce shared library files size for an image
-#   - 'image-prelink' in order to prelink the filesystem image
-#   - 'image-swab' to perform host system intrusion detection
-# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
-# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
-USER_CLASSES ?= "buildstats image-mklibs image-prelink"
-
-#
-# Runtime testing of images
-#
-# The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
-#
-# Interactive shell configuration
-#
-# Under certain circumstances the system may need input from you and to do this it
-# can launch an interactive shell. It needs to do this since the build is
-# multithreaded and needs to be able to handle the case where more than one parallel
-# process may require the user's attention. The default is iterate over the available
-# terminal types to find one that works.
-#
-# Examples of the occasions this may happen are when resolving patches which cannot
-# be applied, to use the devshell or the kernel menuconfig
-#
-# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
-# Note: currently, Konsole support only works for KDE 3.x due to the way
-# newer Konsole versions behave
-#OE_TERMINAL = "auto"
-# By default disable interactive patch resolution (tasks will just fail instead):
-PATCHRESOLVE = "noop"
-
-#
-# Disk Space Monitoring during the build
-#
-# Monitor the disk space during the build. If there is less that 1GB of space or less
-# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
-# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
-# of the build. The reason for this is that running completely out of space can corrupt
-# files and damages the build in ways which may not be easily recoverable.
-BB_DISKMON_DIRS = "\
-    STOPTASKS,${TMPDIR},1G,100K \
-    STOPTASKS,${DL_DIR},1G,100K \
-    STOPTASKS,${SSTATE_DIR},1G,100K \
-    ABORT,${TMPDIR},100M,1K \
-    ABORT,${DL_DIR},100M,1K \
-    ABORT,${SSTATE_DIR},100M,1K"
-
-#
-# Shared-state files from other locations
-#
-# As mentioned above, shared state files are prebuilt cache data objects which can
-# used to accelerate build time. This variable can be used to configure the system
-# to search other mirror locations for these objects before it builds the data itself.
-#
-# This can be a filesystem directory, or a remote url such as http or ftp. These
-# would contain the sstate-cache results from previous builds (possibly from other
-# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
-# cache locations to check for the shared objects.
-# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
-# at the end as shown in the examples below. This will be substituted with the
-# correct path within the directory structure.
-#SSTATE_MIRRORS ?= "\
-#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
-#file://.* file:///some/local/dir/sstate/PATH"
-
-
-#
-# Qemu configuration
-#
-# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. This assumes there is a
-# libsdl library available on your build system.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
-PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-ASSUME_PROVIDED += "libsdl-native"
-
-###############
-#
-# AGL specifics
-#
-###############
-
-# AGL includes all kernel modules here for ease-of-use during development.
-# Comment this out to be able to select the kernel modules yourself.
-IMAGE_INSTALL_append = " kernel-modules"
-
-# Likewise as we included all kernel modules by default in the filesystem,
-# we do not need a separate tarball stored.
-# Comment this out to receive the separate modules tarbal again.
-MODULE_TARBALL_DEPLOY ?= "0"
-
-###############
-# /END AGL
-###############
-
-
-# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
-# track the version of this file when it was generated. This can safely be ignored if
-# this doesn't mean anything to you.
-CONF_VERSION = "1"
diff --git a/templates/dragonboard-410c/conf/bblayers.conf.sample b/templates/dragonboard-410c/conf/bblayers.conf.sample
deleted file mode 100644
index 63245f75e..000000000
--- a/templates/dragonboard-410c/conf/bblayers.conf.sample
+++ /dev/null
@@ -1,29 +0,0 @@
-# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
-# changes incompatibly
-LCONF_VERSION = "6"
-
-BBPATH = "${TOPDIR}"
-BBFILES ?= ""
-
-# AGL layers for DragonBoard-410c
-BBLAYERS ?= " \
-  ##OEROOT##/meta \
-  ##OEROOT##/meta-yocto \
-  ##OEROOT##/meta-yocto-bsp \
-  ##OEROOT##/../meta-agl/meta-ivi-common \
-  ##OEROOT##/../meta-agl/meta-agl \
-  ##OEROOT##/../meta-agl/meta-agl-bsp \
-  ##OEROOT##/../meta-openembedded/meta-oe \
-  ##OEROOT##/../meta-openembedded/meta-multimedia \
-  ##OEROOT##/../meta-openembedded/meta-efl \
-  ##OEROOT##/../meta-openembedded/meta-networking \
-  ##OEROOT##/../meta-openembedded/meta-python \
-  ##OEROOT##/../meta-openembedded/meta-filesystems \
-  ##OEROOT##/../meta-qcom \
-  ##OEROOT##/../meta-rust \
-  "
-BBLAYERS_NON_REMOVABLE ?= " \
-  ##OEROOT##/meta \
-  ##OEROOT##/meta-yocto \
-  ##OEROOT##/../meta-agl/meta-agl \
-  "
diff --git a/templates/dragonboard-410c/conf/conf-notes.txt b/templates/dragonboard-410c/conf/conf-notes.txt
deleted file mode 120000
index fc5c6a1b8..000000000
--- a/templates/dragonboard-410c/conf/conf-notes.txt
+++ /dev/null
@@ -1 +0,0 @@
-../../common/conf-notes.txt
\ No newline at end of file
diff --git a/templates/dragonboard-410c/conf/local.conf.sample b/templates/dragonboard-410c/conf/local.conf.sample
deleted file mode 100644
index 04d6ef106..000000000
--- a/templates/dragonboard-410c/conf/local.conf.sample
+++ /dev/null
@@ -1,261 +0,0 @@
-#
-# AGL
-#####
-
-MACHINE = "dragonboard-410c"
-
-#
-# END AGL
-#########
-
-#
-# This file is your local configuration file and is where all local user settings
-# are placed. The comments in this file give some guide to the options a new user
-# to the system might want to change but pretty much any configuration option can
-# be set in this file. More adventurous users can look at local.conf.extended
-# which contains other examples of configuration which can be placed in this file
-# but new users likely won't need any of them initially.
-#
-# Lines starting with the '#' character are commented out and in some cases the
-# default values are provided as comments to show people example syntax. Enabling
-# the option is a question of removing the # character and making any change to the
-# variable as required.
-
-#
-# Machine Selection
-#
-# You need to select a specific machine to target the build with. There are a selection
-# of emulated machines available which can boot and run in the QEMU emulator:
-#
-#MACHINE ?= "qemuarm"
-#MACHINE ?= "qemumips"
-#MACHINE ?= "qemuppc"
-#MACHINE ?= "qemux86"
-#MACHINE ?= "qemux86-64"
-#
-# There are also the following hardware board target machines included for
-# demonstration purposes:
-#
-#MACHINE ?= "beaglebone"
-#MACHINE ?= "genericx86"
-#MACHINE ?= "genericx86-64"
-#MACHINE ?= "mpc8315e-rdb"
-#MACHINE ?= "edgerouter"
-#
-# This sets the default machine to be qemux86 if no other machine is selected:
-MACHINE ??= "qemux86-64"
-
-#
-# Where to place downloads
-#
-# During a first build the system will download many different source code tarballs
-# from various upstream projects. This can take a while, particularly if your network
-# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
-# can preserve this directory to speed up this part of subsequent builds. This directory
-# is safe to share between multiple builds on the same machine too.
-#
-# The default is a downloads directory under TOPDIR which is the build directory.
-#
-#DL_DIR ?= "${TOPDIR}/downloads"
-
-#
-# Where to place shared-state files
-#
-# BitBake has the capability to accelerate builds based on previously built output.
-# This is done using "shared state" files which can be thought of as cache objects
-# and this option determines where those files are placed.
-#
-# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
-# from these files if no changes were made to the configuration. If changes were made
-# to the configuration, only shared state files where the state was still valid would
-# be used (done using checksums).
-#
-# The default is a sstate-cache directory under TOPDIR.
-#
-#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
-
-#
-# Where to place the build output
-#
-# This option specifies where the bulk of the building work should be done and
-# where BitBake should place its temporary files and output. Keep in mind that
-# this includes the extraction and compilation of many applications and the toolchain
-# which can use Gigabytes of hard disk space.
-#
-# The default is a tmp directory under TOPDIR.
-#
-#TMPDIR = "${TOPDIR}/tmp"
-
-#
-# Default policy config
-#
-# The distribution setting controls which policy settings are used as defaults.
-# The default value is fine for general Yocto project use, at least initially.
-# Ultimately when creating custom policy, people will likely end up subclassing
-# these defaults.
-#
-#DISTRO ?= "poky"
-DISTRO ?= "poky-agl"
-# As an example of a subclass there is a "bleeding" edge policy configuration
-# where many versions are set to the absolute latest code from the upstream
-# source control systems. This is just mentioned here as an example, its not
-# useful to most new users.
-# DISTRO ?= "poky-bleeding"
-
-#
-# Package Management configuration
-#
-# This variable lists which packaging formats to enable. Multiple package backends
-# can be enabled at once and the first item listed in the variable will be used
-# to generate the root filesystems.
-# Options are:
-#  - 'package_deb' for debian style deb files
-#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
-#  - 'package_rpm' for rpm style packages
-# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
-# We default to rpm:
-PACKAGE_CLASSES ?= "package_rpm"
-
-#
-# SDK/ADT target architecture
-#
-# This variable specifies the architecture to build SDK/ADT items for and means
-# you can build the SDK packages for architectures other than the machine you are
-# running the build on (i.e. building i686 packages on an x86_64 host).
-# Supported values are i686 and x86_64
-#SDKMACHINE ?= "i686"
-
-#
-# Extra image configuration defaults
-#
-# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
-# images. Some of these options are added to certain image types automatically. The
-# variable can contain the following options:
-#  "dbg-pkgs"       - add -dbg packages for all installed packages
-#                     (adds symbol information for debugging/profiling)
-#  "dev-pkgs"       - add -dev packages for all installed packages
-#                     (useful if you want to develop against libs in the image)
-#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
-#                     (useful if you want to run the package test suites)
-#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
-#  "tools-debug"    - add debugging tools (gdb, strace)
-#  "eclipse-debug"  - add Eclipse remote debugging support
-#  "tools-profile"  - add profiling tools (oprofile, exmap, lttng, valgrind)
-#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
-#  "debug-tweaks"   - make an image suitable for development
-#                     e.g. ssh root access has a blank password
-# There are other application targets that can be used here too, see
-# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
-# We default to enabling the debugging tweaks.
-EXTRA_IMAGE_FEATURES = "debug-tweaks"
-
-#
-# Additional image features
-#
-# The following is a list of additional classes to use when building images which
-# enable extra features. Some available options which can be included in this variable
-# are:
-#   - 'buildstats' collect build statistics
-#   - 'image-mklibs' to reduce shared library files size for an image
-#   - 'image-prelink' in order to prelink the filesystem image
-#   - 'image-swab' to perform host system intrusion detection
-# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
-# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
-USER_CLASSES ?= "buildstats image-mklibs image-prelink"
-
-#
-# Runtime testing of images
-#
-# The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
-#
-# Interactive shell configuration
-#
-# Under certain circumstances the system may need input from you and to do this it
-# can launch an interactive shell. It needs to do this since the build is
-# multithreaded and needs to be able to handle the case where more than one parallel
-# process may require the user's attention. The default is iterate over the available
-# terminal types to find one that works.
-#
-# Examples of the occasions this may happen are when resolving patches which cannot
-# be applied, to use the devshell or the kernel menuconfig
-#
-# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
-# Note: currently, Konsole support only works for KDE 3.x due to the way
-# newer Konsole versions behave
-#OE_TERMINAL = "auto"
-# By default disable interactive patch resolution (tasks will just fail instead):
-PATCHRESOLVE = "noop"
-
-#
-# Disk Space Monitoring during the build
-#
-# Monitor the disk space during the build. If there is less that 1GB of space or less
-# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
-# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
-# of the build. The reason for this is that running completely out of space can corrupt
-# files and damages the build in ways which may not be easily recoverable.
-BB_DISKMON_DIRS = "\
-    STOPTASKS,${TMPDIR},1G,100K \
-    STOPTASKS,${DL_DIR},1G,100K \
-    STOPTASKS,${SSTATE_DIR},1G,100K \
-    ABORT,${TMPDIR},100M,1K \
-    ABORT,${DL_DIR},100M,1K \
-    ABORT,${SSTATE_DIR},100M,1K"
-
-#
-# Shared-state files from other locations
-#
-# As mentioned above, shared state files are prebuilt cache data objects which can
-# used to accelerate build time. This variable can be used to configure the system
-# to search other mirror locations for these objects before it builds the data itself.
-#
-# This can be a filesystem directory, or a remote url such as http or ftp. These
-# would contain the sstate-cache results from previous builds (possibly from other
-# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
-# cache locations to check for the shared objects.
-# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
-# at the end as shown in the examples below. This will be substituted with the
-# correct path within the directory structure.
-#SSTATE_MIRRORS ?= "\
-#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
-#file://.* file:///some/local/dir/sstate/PATH"
-
-
-#
-# Qemu configuration
-#
-# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. This assumes there is a
-# libsdl library available on your build system.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
-PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-ASSUME_PROVIDED += "libsdl-native"
-
-###############
-#
-# AGL specifics
-#
-###############
-
-# AGL includes all kernel modules here for ease-of-use during development.
-# Comment this out to be able to select the kernel modules yourself.
-IMAGE_INSTALL_append = " kernel-modules"
-
-# Likewise as we included all kernel modules by default in the filesystem,
-# we do not need a separate tarball stored.
-# Comment this out to receive the separate modules tarbal again.
-MODULE_TARBALL_DEPLOY ?= "0"
-
-###############
-# /END AGL
-###############
-
-
-# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
-# track the version of this file when it was generated. This can safely be ignored if
-# this doesn't mean anything to you.
-CONF_VERSION = "1"
diff --git a/templates/feature/agl-devel/50_local.conf.inc b/templates/feature/agl-devel/50_local.conf.inc
new file mode 100644
index 000000000..bde32dd62
--- /dev/null
+++ b/templates/feature/agl-devel/50_local.conf.inc
@@ -0,0 +1,20 @@
+EXTRA_IMAGE_FEATURES =+ "debug-tweaks eclipse-debug tools-debug tools-profile"
+
+IMAGE_INSTALL_append = " \
+	strace \
+	ldd \
+	gdb \
+	valgrind \
+	perf \
+	powertop \
+	latencytop \
+	systemtap \
+	screen \
+	usbutils \
+"
+
+# disable install of debug files in SDK
+# initial value: SDKIMAGE_FEATURES="dev-pkgs dbg-pkgs staticdev-pkgs"
+SDKIMAGE_FEATURES="dev-pkgs"
+
+
diff --git a/templates/feature/agl-netboot/50_bblayers.conf.inc b/templates/feature/agl-netboot/50_bblayers.conf.inc
new file mode 100644
index 000000000..3d2ed6460
--- /dev/null
+++ b/templates/feature/agl-netboot/50_bblayers.conf.inc
@@ -0,0 +1 @@
+BBLAYERS =+ "${METADIR}/meta-agl/meta-netboot"
diff --git a/templates/feature/agl-netboot/50_local.conf.inc b/templates/feature/agl-netboot/50_local.conf.inc
new file mode 100644
index 000000000..f7444d689
--- /dev/null
+++ b/templates/feature/agl-netboot/50_local.conf.inc
@@ -0,0 +1 @@
+INHERIT += "netboot"
diff --git a/templates/intel-corei7-64/conf/bblayers.conf.sample b/templates/intel-corei7-64/conf/bblayers.conf.sample
deleted file mode 100644
index 4bf44d5d1..000000000
--- a/templates/intel-corei7-64/conf/bblayers.conf.sample
+++ /dev/null
@@ -1,29 +0,0 @@
-# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
-# changes incompatibly
-LCONF_VERSION = "6"
-
-BBPATH = "${TOPDIR}"
-BBFILES ?= ""
-
-# AGL layers for MinnowBoard MAX (Intel)
-BBLAYERS ?= " \
-  ##OEROOT##/meta \
-  ##OEROOT##/meta-yocto \
-  ##OEROOT##/meta-yocto-bsp \
-  ##OEROOT##/../meta-agl/meta-ivi-common \
-  ##OEROOT##/../meta-agl/meta-agl \
-  ##OEROOT##/../meta-agl/meta-agl-bsp \
-  ##OEROOT##/../meta-openembedded/meta-oe \
-  ##OEROOT##/../meta-openembedded/meta-multimedia \
-  ##OEROOT##/../meta-openembedded/meta-efl \
-  ##OEROOT##/../meta-openembedded/meta-networking \
-  ##OEROOT##/../meta-openembedded/meta-python \
-  ##OEROOT##/../meta-openembedded/meta-filesystems \
-  ##OEROOT##/../meta-intel \
-  ##OEROOT##/../meta-rust \
-  "
-BBLAYERS_NON_REMOVABLE ?= " \
-  ##OEROOT##/meta \
-  ##OEROOT##/meta-yocto \
-  ##OEROOT##/../meta-agl/meta-agl \
-  "
diff --git a/templates/intel-corei7-64/conf/conf-notes.txt b/templates/intel-corei7-64/conf/conf-notes.txt
deleted file mode 120000
index fc5c6a1b8..000000000
--- a/templates/intel-corei7-64/conf/conf-notes.txt
+++ /dev/null
@@ -1 +0,0 @@
-../../common/conf-notes.txt
\ No newline at end of file
diff --git a/templates/intel-corei7-64/conf/local.conf.sample b/templates/intel-corei7-64/conf/local.conf.sample
deleted file mode 100644
index 25d8cda77..000000000
--- a/templates/intel-corei7-64/conf/local.conf.sample
+++ /dev/null
@@ -1,275 +0,0 @@
-# Machine Selection: MinnowBoard MAX
-MACHINE ?= "intel-corei7-64"
-# Comment out below if want to use QtWebkit
-PACKAGECONFIG_remove_pn-qtquick1 = "webkit"
-
-#
-# This file is your local configuration file and is where all local user settings
-# are placed. The comments in this file give some guide to the options a new user
-# to the system might want to change but pretty much any configuration option can
-# be set in this file. More adventurous users can look at local.conf.extended
-# which contains other examples of configuration which can be placed in this file
-# but new users likely won't need any of them initially.
-#
-# Lines starting with the '#' character are commented out and in some cases the
-# default values are provided as comments to show people example syntax. Enabling
-# the option is a question of removing the # character and making any change to the
-# variable as required.
-
-#
-# Machine Selection
-#
-# You need to select a specific machine to target the build with. There are a selection
-# of emulated machines available which can boot and run in the QEMU emulator:
-#
-#MACHINE ?= "qemuarm"
-#MACHINE ?= "qemumips"
-#MACHINE ?= "qemuppc"
-#MACHINE ?= "qemux86"
-#MACHINE ?= "qemux86-64"
-#
-# There are also the following hardware board target machines included for
-# demonstration purposes:
-#
-#MACHINE ?= "beaglebone"
-#MACHINE ?= "genericx86"
-#MACHINE ?= "genericx86-64"
-#MACHINE ?= "mpc8315e-rdb"
-#MACHINE ?= "edgerouter"
-#
-# This sets the default machine to be qemux86 if no other machine is selected:
-MACHINE ??= "qemux86-64"
-
-#
-# Where to place downloads
-#
-# During a first build the system will download many different source code tarballs
-# from various upstream projects. This can take a while, particularly if your network
-# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
-# can preserve this directory to speed up this part of subsequent builds. This directory
-# is safe to share between multiple builds on the same machine too.
-#
-# The default is a downloads directory under TOPDIR which is the build directory.
-#
-#DL_DIR ?= "${TOPDIR}/downloads"
-
-#
-# Where to place shared-state files
-#
-# BitBake has the capability to accelerate builds based on previously built output.
-# This is done using "shared state" files which can be thought of as cache objects
-# and this option determines where those files are placed.
-#
-# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
-# from these files if no changes were made to the configuration. If changes were made
-# to the configuration, only shared state files where the state was still valid would
-# be used (done using checksums).
-#
-# The default is a sstate-cache directory under TOPDIR.
-#
-#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
-
-#
-# Where to place the build output
-#
-# This option specifies where the bulk of the building work should be done and
-# where BitBake should place its temporary files and output. Keep in mind that
-# this includes the extraction and compilation of many applications and the toolchain
-# which can use Gigabytes of hard disk space.
-#
-# The default is a tmp directory under TOPDIR.
-#
-#TMPDIR = "${TOPDIR}/tmp"
-
-#
-# Default policy config
-#
-# The distribution setting controls which policy settings are used as defaults.
-# The default value is fine for general Yocto project use, at least initially.
-# Ultimately when creating custom policy, people will likely end up subclassing
-# these defaults.
-#
-#DISTRO ?= "poky"
-DISTRO ?= "poky-agl"
-# As an example of a subclass there is a "bleeding" edge policy configuration
-# where many versions are set to the absolute latest code from the upstream
-# source control systems. This is just mentioned here as an example, its not
-# useful to most new users.
-# DISTRO ?= "poky-bleeding"
-
-#
-# Package Management configuration
-#
-# This variable lists which packaging formats to enable. Multiple package backends
-# can be enabled at once and the first item listed in the variable will be used
-# to generate the root filesystems.
-# Options are:
-#  - 'package_deb' for debian style deb files
-#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
-#  - 'package_rpm' for rpm style packages
-# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
-# We default to rpm:
-PACKAGE_CLASSES ?= "package_rpm"
-
-#
-# SDK/ADT target architecture
-#
-# This variable specifies the architecture to build SDK/ADT items for and means
-# you can build the SDK packages for architectures other than the machine you are
-# running the build on (i.e. building i686 packages on an x86_64 host).
-# Supported values are i686 and x86_64
-#SDKMACHINE ?= "i686"
-
-#
-# Extra image configuration defaults
-#
-# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
-# images. Some of these options are added to certain image types automatically. The
-# variable can contain the following options:
-#  "dbg-pkgs"       - add -dbg packages for all installed packages
-#                     (adds symbol information for debugging/profiling)
-#  "dev-pkgs"       - add -dev packages for all installed packages
-#                     (useful if you want to develop against libs in the image)
-#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
-#                     (useful if you want to run the package test suites)
-#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
-#  "tools-debug"    - add debugging tools (gdb, strace)
-#  "eclipse-debug"  - add Eclipse remote debugging support
-#  "tools-profile"  - add profiling tools (oprofile, exmap, lttng, valgrind)
-#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
-#  "debug-tweaks"   - make an image suitable for development
-#                     e.g. ssh root access has a blank password
-# There are other application targets that can be used here too, see
-# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
-# We default to enabling the debugging tweaks.
-EXTRA_IMAGE_FEATURES = "debug-tweaks"
-
-#
-# Additional image features
-#
-# The following is a list of additional classes to use when building images which
-# enable extra features. Some available options which can be included in this variable
-# are:
-#   - 'buildstats' collect build statistics
-#   - 'image-mklibs' to reduce shared library files size for an image
-#   - 'image-prelink' in order to prelink the filesystem image
-#   - 'image-swab' to perform host system intrusion detection
-# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
-# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
-USER_CLASSES ?= "buildstats image-mklibs image-prelink"
-
-#
-# Runtime testing of images
-#
-# The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
-#
-# Interactive shell configuration
-#
-# Under certain circumstances the system may need input from you and to do this it
-# can launch an interactive shell. It needs to do this since the build is
-# multithreaded and needs to be able to handle the case where more than one parallel
-# process may require the user's attention. The default is iterate over the available
-# terminal types to find one that works.
-#
-# Examples of the occasions this may happen are when resolving patches which cannot
-# be applied, to use the devshell or the kernel menuconfig
-#
-# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
-# Note: currently, Konsole support only works for KDE 3.x due to the way
-# newer Konsole versions behave
-#OE_TERMINAL = "auto"
-# By default disable interactive patch resolution (tasks will just fail instead):
-PATCHRESOLVE = "noop"
-
-#
-# Disk Space Monitoring during the build
-#
-# Monitor the disk space during the build. If there is less that 1GB of space or less
-# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
-# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
-# of the build. The reason for this is that running completely out of space can corrupt
-# files and damages the build in ways which may not be easily recoverable.
-BB_DISKMON_DIRS = "\
-    STOPTASKS,${TMPDIR},1G,100K \
-    STOPTASKS,${DL_DIR},1G,100K \
-    STOPTASKS,${SSTATE_DIR},1G,100K \
-    ABORT,${TMPDIR},100M,1K \
-    ABORT,${DL_DIR},100M,1K \
-    ABORT,${SSTATE_DIR},100M,1K"
-
-#
-# Shared-state files from other locations
-#
-# As mentioned above, shared state files are prebuilt cache data objects which can
-# used to accelerate build time. This variable can be used to configure the system
-# to search other mirror locations for these objects before it builds the data itself.
-#
-# This can be a filesystem directory, or a remote url such as http or ftp. These
-# would contain the sstate-cache results from previous builds (possibly from other
-# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
-# cache locations to check for the shared objects.
-# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
-# at the end as shown in the examples below. This will be substituted with the
-# correct path within the directory structure.
-#SSTATE_MIRRORS ?= "\
-#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
-#file://.* file:///some/local/dir/sstate/PATH"
-
-
-#
-# Qemu configuration
-#
-# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. This assumes there is a
-# libsdl library available on your build system.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
-PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-ASSUME_PROVIDED += "libsdl-native"
-
-###############
-#
-# AGL specifics
-#
-###############
-
-# AGL includes all kernel modules here for ease-of-use during development.
-# Comment this out to be able to select the kernel modules yourself.
-IMAGE_INSTALL_append = " kernel-modules"
-
-# Likewise as we included all kernel modules by default in the filesystem,
-# we do not need a separate tarball stored.
-# Comment this out to receive the separate modules tarbal again.
-MODULE_TARBALL_DEPLOY ?= "0"
-
-# Configurations to run on VirtualBox/VMWare
-#
-# To get wide screen than default, there are a selection of resolutions
-# available:
-#
-#APPEND += "uvesafb.mode_option=1024x768-32"
-#APPEND += "uvesafb.mode_option=1280x1024-32"
-#APPEND += "uvesafb.mode_option=1600x1200-32"
-#
-# To avoid corrupt boot screen by systemd message, you can use serial
-# console separated from VGA console or disable all boot messages by
-# kernel command line.
-#
-# Configuration for serial console
-#APPEND += "console=ttyS0,115200n8"
-#
-# All boot message will be off
-#APPEND += "quiet"
-
-###############
-# /END AGL
-###############
-
-
-# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
-# track the version of this file when it was generated. This can safely be ignored if
-# this doesn't mean anything to you.
-CONF_VERSION = "1"
diff --git a/templates/machine/dra7xx-evm/50_bblayers.conf.inc b/templates/machine/dra7xx-evm/50_bblayers.conf.inc
new file mode 100644
index 000000000..c62a1bbb3
--- /dev/null
+++ b/templates/machine/dra7xx-evm/50_bblayers.conf.inc
@@ -0,0 +1 @@
+BBLAYERS =+ "${METADIR}/meta-ti"
diff --git a/templates/machine/dra7xx-evm/50_local.conf.inc b/templates/machine/dra7xx-evm/50_local.conf.inc
new file mode 100644
index 000000000..adf577e8b
--- /dev/null
+++ b/templates/machine/dra7xx-evm/50_local.conf.inc
@@ -0,0 +1,5 @@
+MACHINE = "dra7xx-evm"
+
+## ATTENTION, this is needed right now to build meta-ti with AGL: ##
+## due to meta-ti being based on YP 1.8 instead of YP 2.0
+BBMASK  = "meta-ti/.*eudev"
diff --git a/templates/machine/dragonboard-410c/50_bblayers.conf.inc b/templates/machine/dragonboard-410c/50_bblayers.conf.inc
new file mode 100644
index 000000000..01ffb7f17
--- /dev/null
+++ b/templates/machine/dragonboard-410c/50_bblayers.conf.inc
@@ -0,0 +1 @@
+BBLAYERS =+ "${METADIR}/meta-qcom"
diff --git a/templates/machine/dragonboard-410c/50_local.conf.inc b/templates/machine/dragonboard-410c/50_local.conf.inc
new file mode 100644
index 000000000..472592c1f
--- /dev/null
+++ b/templates/machine/dragonboard-410c/50_local.conf.inc
@@ -0,0 +1 @@
+MACHINE = "dragonboard-410c"
diff --git a/templates/machine/dragonboard-410c/50_setup.sh b/templates/machine/dragonboard-410c/50_setup.sh
new file mode 100644
index 000000000..7be1dad32
--- /dev/null
+++ b/templates/machine/dragonboard-410c/50_setup.sh
@@ -0,0 +1 @@
+find_and_ack_eula $METADIR/meta-qcom
diff --git a/templates/machine/intel-corei7-64/50_bblayers.conf.inc b/templates/machine/intel-corei7-64/50_bblayers.conf.inc
new file mode 100644
index 000000000..d50ccc922
--- /dev/null
+++ b/templates/machine/intel-corei7-64/50_bblayers.conf.inc
@@ -0,0 +1 @@
+BBLAYERS =+ "${METADIR}/meta-intel"
diff --git a/templates/machine/intel-corei7-64/50_local.conf.inc b/templates/machine/intel-corei7-64/50_local.conf.inc
new file mode 100644
index 000000000..e88000f5c
--- /dev/null
+++ b/templates/machine/intel-corei7-64/50_local.conf.inc
@@ -0,0 +1,20 @@
+MACHINE = "intel-corei7-64"
+
+# Configurations to run on VirtualBox/VMWare
+#
+# To get wide screen than default, there are a selection of resolutions
+# available:
+#
+#APPEND += "uvesafb.mode_option=1024x768-32"
+#APPEND += "uvesafb.mode_option=1280x1024-32"
+#APPEND += "uvesafb.mode_option=1600x1200-32"
+#
+# To avoid corrupt boot screen by systemd message, you can use serial
+# console separated from VGA console or disable all boot messages by
+# kernel command line.
+#
+# Configuration for serial console
+#APPEND += "console=ttyS0,115200n8"
+#
+# All boot message will be off
+#APPEND += "quiet"
diff --git a/templates/machine/porter-nogfx/50_bblayers.conf.inc b/templates/machine/porter-nogfx/50_bblayers.conf.inc
new file mode 100644
index 000000000..ba0e17ef3
--- /dev/null
+++ b/templates/machine/porter-nogfx/50_bblayers.conf.inc
@@ -0,0 +1,5 @@
+BBLAYERS =+ "\
+  ${METADIR}/meta-renesas \
+  ${METADIR}/meta-renesas/meta-rcar-gen2 \
+  "
+
diff --git a/templates/machine/porter-nogfx/50_local.conf.inc b/templates/machine/porter-nogfx/50_local.conf.inc
new file mode 100644
index 000000000..ff76a8731
--- /dev/null
+++ b/templates/machine/porter-nogfx/50_local.conf.inc
@@ -0,0 +1,180 @@
+MACHINE = "porter"
+
+# For running GStreamer on wayland (experimental).
+#
+# Uncoment below if want to use multimedia acceleration on wayland
+#
+#IMAGE_INSTALL_append_porter = " \
+#    gstreamer1.0-plugins-bad-waylandsink \
+#    "
+
+# Additional plugins to test multimedia acceleration (experimental)
+#
+# Uncoment below if want to use multimedia acceleration
+#
+#IMAGE_INSTALL_append_porter = " \
+#    gstreamer1.0-plugins-base-videorate \
+#    gstreamer1.0-plugins-base-videotestsrc \
+#    gstreamer1.0-plugins-base-audiotestsrc \
+#    gstreamer1.0-plugins-base-alsa \
+#    gstreamer1.0-plugins-good-autodetect \
+#    gstreamer1.0-plugins-good-isomp4 \
+#    gstreamer1.0-plugins-good-video4linux2 \
+#    gstreamer1.0-plugins-good-videocrop \
+#    gstreamer1.0-plugins-bad-asfmux \
+#    gstreamer1.0-plugins-bad-fbdevsink \
+#    gstreamer1.0-plugins-bad-faad \
+#    gstreamer1.0-plugins-bad-videoparsersbad \
+#"
+# for graphics acceleration
+#
+# Uncoment below if want to use multimedia acceleration
+#
+#IMAGE_INSTALL_append_porter = " \
+#    libegl libegl-dev libgbm-dev \
+#    gles-kernel-module gles-user-module \
+#    libdrm-tests \
+#    libdrm-kms \
+#    "
+
+# for multimedia acceleration
+#
+# Uncoment below if want to use multimedia acceleration
+#
+#IMAGE_INSTALL_append_porter = " \
+#    packagegroup-rcar-gen2-multimedia \
+#    packagegroup-lcb-oss-codecs \
+#    alsa-utils alsa-utils-config alsa-tools \
+#"
+
+# For Bluetooth hardware support
+BT_KERNEL_MODULES = " \
+    kernel-module-btusb \
+    kernel-module-bnep \
+    kernel-module-rfcomm \
+    kernel-module-rfkill \
+    "
+
+# Distribution-specific runtime components
+IMAGE_INSTALL_append = " \
+    ${@bb.utils.contains("DISTRO_FEATURES", "bluetooth", "${BT_KERNEL_MODULES}", "", d)} \
+    "
+
+# TODO: When booting weston, someone try to load 'libgbm_kms.so' then
+# fail to boot. It should be 'libgbm_kms.so.1'.
+# Tentatively, it is to install 'libgbm-dev' pkg.
+#IMAGE_INSTALL_append = "libgbm-dev"
+# this is not recommended and should be done in the recipe requiring this module (gles-user-module)
+
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Define the name of multimedia, dtv, graphic test, multimedia-test for bbmask
+BB_MULTIMEDIA_KERNEL_MODULE = "fdpm-kernel-module|mmngr-kernel-module|\
+                               mmngrbuf-kernel-module|s3ctl-kernel-module|\
+                               uvcs-kernel-module|vspm-kernel-module"
+BB_MULTIMEDIA_USER_MODULE = "fdpm-user-module|mmngr-user-module|\
+                             mmngrbuf-user-module|omx-user-module|\
+                             s3ctl-user-module|vspm-user-module|libmemcpy"
+BB_MULTIMEDIA_TEST_MODULE = "fdpm-tp-user-module|mmngr-tp-user-module|\
+                             mmngrbuf-tp-user-module|s3ctl-tp-user-module|\
+                             vspm-tp-user-module"
+BB_GST_PLUGINS = "meta-renesas/meta-rcar-gen2/recipes-multimedia/gstreamer"
+MULTIMEDIA_BB = "${BB_MULTIMEDIA_KERNEL_MODULE}|${BB_MULTIMEDIA_USER_MODULE}|\
+                 ${BB_MULTIMEDIA_TEST_MODULE}|${BB_GST_PLUGINS}"
+
+# Enable Multimedia standard pkg
+#MACHINE_FEATURES_append = " multimedia"
+
+# UnMask the multimedia kernel modules
+#BBMASK .= "|${BB_MULTIMEDIA_KERNEL_MODULE}"
+
+# UnMask the multimedia user modules
+#BBMASK .= "|${BB_MULTIMEDIA_USER_MODULE}"
+
+# Include static library in SDK
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Mask the DTV pkgs
+#MACHINE_FEATURES_append = " dtv"
+BBMASK = "dtv-module|ssp-module|scu-module"
+
+# Enable graphic pkgs
+#BBMASK .= "|gles-kernel-module|gles-user-module"
+
+# Mask the multimedia-test
+BBMASK .= "|${BB_MULTIMEDIA_TEST_MODULE}"
+
+# Mask the graphic test
+BBMASK .= "|gles-test-module"
+
+#DISTRO_FEATURES_append = " mm-test"
+#DISTRO_FEATURES_append = " gles-test"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " sgx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "libegl"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+
+# Setting for u-boot Wayland
+UBOOT_MACHINE = "porter_vin_config"
+
+# Addtional Configurations of Optional OMX modules
+
+# OMX Media Component H263 Decoder Library
+#DISTRO_FEATURES_append = " h263dec_lib"
+# OMX Media Component VC-1 Decoder Library
+#DISTRO_FEATURES_append = " vc1dec_lib"
+# OMX Media Component MPEG-4 Decoder Library
+#DISTRO_FEATURES_append = " mpeg4dec_lib"
+# VCP3 Driver Adapted for Linux MPEG-2 Decoder Library
+#DISTRO_FEATURES_append = " mpeg2dec_lib"
+# DivX Decoder Library for Linux
+#DISTRO_FEATURES_append = " divxdec_lib"
+# Encoder Library for Linux
+DISTRO_FEATURES_append = " h264avcenc_lib"
+
+# Configurations of Optional Audio Decoders
+# ARM 5.1ch aacPlus V2 Decoder for Linux
+#DISTRO_FEATURES_append = " aacp2dec_lib"
+# ARM MP3 Decoder for Linux
+#DISTRO_FEATURES_append = " mp3dec_lib"
+# ARM WMA Decoder for Linux
+#DISTRO_FEATURES_append = " wmadec_lib"
+# ARM 5.1ch Dolby Digital Decoder for Linux
+#DISTRO_FEATURES_append = " ddddec_lib"
+# ARM ALAC Decoder for Linux
+#DISTRO_FEATURES_append = " alacdec_lib"
+# ARM FLAC Decoder for Linux
+#DISTRO_FEATURES_append = " flacdec_lib"
+# ARM AAC-LC Decoder Library Sample for Linux
+#DISTRO_FEATURES_append = " aaclcsdec_lib"
+# ARM AAC Encoder for Linux
+#DISTRO_FEATURES_append = " aacenc_lib"
+
+# Configurations of Optional Audio Middlewares
+# ARM 5.1ch aacPlus V2 Decode Middleware for Linux
+#DISTRO_FEATURES_append = " armaccp2dec_mdw"
+# ARM MP3 Decode Middleware for Linux
+#DISTRO_FEATURES_append = " mp3dec_mdw"
+# ARM WMA Decode Middleware for Linux
+#DISTRO_FEATURES_append = " wmadec_mdw"
+# ARM 5.1ch Dolby Digital Decode Middleware for Linux
+#DISTRO_FEATURES_append = " ddddec_mdw"
+# ARM ALAC Decode Middleware for Linux
+#DISTRO_FEATURES_append = " alacdec_mdw"
+# ARM FLAC Decode Middleware for Linux
+#DISTRO_FEATURES_append = " flacdec_mdw"
+# ARM AAC Decode Middleware Sample for Linux
+#DISTRO_FEATURES_append = " aacsdec_mdw"
+# ARM AAC Encode Middleware for Linux
+#DISTRO_FEATURES_append = " aacenc_mdw"
+
diff --git a/templates/machine/porter/50_bblayers.conf.inc b/templates/machine/porter/50_bblayers.conf.inc
new file mode 100644
index 000000000..ba0e17ef3
--- /dev/null
+++ b/templates/machine/porter/50_bblayers.conf.inc
@@ -0,0 +1,5 @@
+BBLAYERS =+ "\
+  ${METADIR}/meta-renesas \
+  ${METADIR}/meta-renesas/meta-rcar-gen2 \
+  "
+
diff --git a/templates/machine/porter/50_local.conf.inc b/templates/machine/porter/50_local.conf.inc
new file mode 100644
index 000000000..72b255de4
--- /dev/null
+++ b/templates/machine/porter/50_local.conf.inc
@@ -0,0 +1,179 @@
+MACHINE = "porter"
+
+# For running GStreamer on wayland (experimental).
+#
+# Uncoment below if want to use multimedia acceleration on wayland
+#
+IMAGE_INSTALL_append_porter = " \
+    gstreamer1.0-plugins-bad-waylandsink \
+    "
+
+# Additional plugins to test multimedia acceleration (experimental)
+#
+# Uncoment below if want to use multimedia acceleration
+#
+IMAGE_INSTALL_append_porter = " \
+    gstreamer1.0-plugins-base-videorate \
+    gstreamer1.0-plugins-base-videotestsrc \
+    gstreamer1.0-plugins-base-audiotestsrc \
+    gstreamer1.0-plugins-base-alsa \
+    gstreamer1.0-plugins-good-autodetect \
+    gstreamer1.0-plugins-good-isomp4 \
+    gstreamer1.0-plugins-good-video4linux2 \
+    gstreamer1.0-plugins-good-videocrop \
+    gstreamer1.0-plugins-bad-asfmux \
+    gstreamer1.0-plugins-bad-fbdevsink \
+    gstreamer1.0-plugins-bad-faad \
+    gstreamer1.0-plugins-bad-videoparsersbad \
+"
+# for graphics acceleration
+#
+# Uncoment below if want to use multimedia acceleration
+#
+IMAGE_INSTALL_append_porter = " \
+    libegl libegl-dev libgbm-dev \
+    gles-kernel-module gles-user-module \
+    libdrm-tests \
+   libdrm-kms \
+    "
+
+# for multimedia acceleration
+#
+# Uncoment below if want to use multimedia acceleration
+#
+IMAGE_INSTALL_append_porter = " \
+    packagegroup-rcar-gen2-multimedia \
+    packagegroup-lcb-oss-codecs \
+    alsa-utils alsa-utils-config alsa-tools \
+"
+
+# For Bluetooth hardware support
+BT_KERNEL_MODULES = " \
+    kernel-module-btusb \
+    kernel-module-bnep \
+    kernel-module-rfcomm \
+    kernel-module-rfkill \
+    "
+
+# Distribution-specific runtime components
+IMAGE_INSTALL_append = " \
+    ${@bb.utils.contains("DISTRO_FEATURES", "bluetooth", "${BT_KERNEL_MODULES}", "", d)} \
+    "
+
+# TODO: When booting weston, someone try to load 'libgbm_kms.so' then
+# fail to boot. It should be 'libgbm_kms.so.1'.
+# Tentatively, it is to install 'libgbm-dev' pkg.
+#IMAGE_INSTALL_append = "libgbm-dev"
+# this is not recommended and should be done in the recipe requiring this module (gles-user-module)
+
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Define the name of multimedia, dtv, graphic test, multimedia-test for bbmask
+BB_MULTIMEDIA_KERNEL_MODULE = "fdpm-kernel-module|mmngr-kernel-module|\
+                               mmngrbuf-kernel-module|s3ctl-kernel-module|\
+                               uvcs-kernel-module|vspm-kernel-module"
+BB_MULTIMEDIA_USER_MODULE = "fdpm-user-module|mmngr-user-module|\
+                             mmngrbuf-user-module|omx-user-module|\
+                             s3ctl-user-module|vspm-user-module|libmemcpy"
+BB_MULTIMEDIA_TEST_MODULE = "fdpm-tp-user-module|mmngr-tp-user-module|\
+                             mmngrbuf-tp-user-module|s3ctl-tp-user-module|\
+                             vspm-tp-user-module"
+BB_GST_PLUGINS = "meta-renesas/meta-rcar-gen2/recipes-multimedia/gstreamer"
+MULTIMEDIA_BB = "${BB_MULTIMEDIA_KERNEL_MODULE}|${BB_MULTIMEDIA_USER_MODULE}|\
+                 ${BB_MULTIMEDIA_TEST_MODULE}|${BB_GST_PLUGINS}"
+
+# Enable Multimedia standard pkg
+MACHINE_FEATURES_append = " multimedia"
+
+# UnMask the multimedia kernel modules
+#BBMASK .= "|${BB_MULTIMEDIA_KERNEL_MODULE}"
+
+# UnMask the multimedia user modules
+#BBMASK .= "|${BB_MULTIMEDIA_USER_MODULE}"
+
+# Include static library in SDK
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Mask the DTV pkgs
+#MACHINE_FEATURES_append = " dtv"
+BBMASK = "dtv-module|ssp-module|scu-module"
+
+# Enable graphic pkgs
+#BBMASK .= "|gles-kernel-module|gles-user-module"
+
+# Mask the multimedia-test
+BBMASK .= "|${BB_MULTIMEDIA_TEST_MODULE}"
+
+# Mask the graphic test
+BBMASK .= "|gles-test-module"
+
+#DISTRO_FEATURES_append = " mm-test"
+#DISTRO_FEATURES_append = " gles-test"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " sgx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "libegl"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+
+# Setting for u-boot Wayland
+UBOOT_MACHINE = "porter_vin_config"
+
+# Addtional Configurations of Optional OMX modules
+
+# OMX Media Component H263 Decoder Library
+#DISTRO_FEATURES_append = " h263dec_lib"
+# OMX Media Component VC-1 Decoder Library
+#DISTRO_FEATURES_append = " vc1dec_lib"
+# OMX Media Component MPEG-4 Decoder Library
+#DISTRO_FEATURES_append = " mpeg4dec_lib"
+# VCP3 Driver Adapted for Linux MPEG-2 Decoder Library
+#DISTRO_FEATURES_append = " mpeg2dec_lib"
+# DivX Decoder Library for Linux
+#DISTRO_FEATURES_append = " divxdec_lib"
+# Encoder Library for Linux
+DISTRO_FEATURES_append = " h264avcenc_lib"
+
+# Configurations of Optional Audio Decoders
+# ARM 5.1ch aacPlus V2 Decoder for Linux
+#DISTRO_FEATURES_append = " aacp2dec_lib"
+# ARM MP3 Decoder for Linux
+#DISTRO_FEATURES_append = " mp3dec_lib"
+# ARM WMA Decoder for Linux
+#DISTRO_FEATURES_append = " wmadec_lib"
+# ARM 5.1ch Dolby Digital Decoder for Linux
+#DISTRO_FEATURES_append = " ddddec_lib"
+# ARM ALAC Decoder for Linux
+#DISTRO_FEATURES_append = " alacdec_lib"
+# ARM FLAC Decoder for Linux
+#DISTRO_FEATURES_append = " flacdec_lib"
+# ARM AAC-LC Decoder Library Sample for Linux
+#DISTRO_FEATURES_append = " aaclcsdec_lib"
+# ARM AAC Encoder for Linux
+#DISTRO_FEATURES_append = " aacenc_lib"
+
+# Configurations of Optional Audio Middlewares
+# ARM 5.1ch aacPlus V2 Decode Middleware for Linux
+#DISTRO_FEATURES_append = " armaccp2dec_mdw"
+# ARM MP3 Decode Middleware for Linux
+#DISTRO_FEATURES_append = " mp3dec_mdw"
+# ARM WMA Decode Middleware for Linux
+#DISTRO_FEATURES_append = " wmadec_mdw"
+# ARM 5.1ch Dolby Digital Decode Middleware for Linux
+#DISTRO_FEATURES_append = " ddddec_mdw"
+# ARM ALAC Decode Middleware for Linux
+#DISTRO_FEATURES_append = " alacdec_mdw"
+# ARM FLAC Decode Middleware for Linux
+#DISTRO_FEATURES_append = " flacdec_mdw"
+# ARM AAC Decode Middleware Sample for Linux
+#DISTRO_FEATURES_append = " aacsdec_mdw"
+# ARM AAC Encode Middleware for Linux
+#DISTRO_FEATURES_append = " aacenc_mdw"
diff --git a/templates/machine/porter/50_setup.sh b/templates/machine/porter/50_setup.sh
new file mode 100644
index 000000000..f51d4f4f5
--- /dev/null
+++ b/templates/machine/porter/50_setup.sh
@@ -0,0 +1,14 @@
+# setup proprietary gfx drivers and multimedia packages
+pushd $METADIR 2>/dev/null
+
+SETUP_MM_SCRIPT=$METADIR/meta-renesas/meta-rcar-gen2/scripts/setup_mm_packages.sh
+if [ -f $SETUP_MM_SCRIPT ]; then
+	. $SETUP_MM_SCRIPT $MACHINE
+	copy_mm_packages $MACHINE
+	if [ $? -ne 0 ]; then
+		echo "Copying gfx drivers and multimedia packages for '$MACHINE' failed."
+		exit 1
+	fi
+fi
+
+popd 2>/dev/null
diff --git a/templates/machine/qemux86-64/50_local.conf.inc b/templates/machine/qemux86-64/50_local.conf.inc
new file mode 100644
index 000000000..f5bb53cfc
--- /dev/null
+++ b/templates/machine/qemux86-64/50_local.conf.inc
@@ -0,0 +1,20 @@
+MACHINE = "qemux86-64"
+
+# Configurations to run on VirtualBox/VMWare
+#
+# To get wide screen than default, there are a selection of resolutions
+# available:
+#
+#APPEND += "uvesafb.mode_option=1024x768-32"
+APPEND += "uvesafb.mode_option=1280x1024-32"
+#APPEND += "uvesafb.mode_option=1600x1200-32"
+#
+# To avoid corrupt boot screen by systemd message, you can use serial
+# console separated from VGA console or disable all boot messages by
+# kernel command line.
+#
+# Configuration for serial console
+APPEND += "console=ttyS0,115200n8"
+#
+# All boot message will be off
+APPEND += "quiet"
diff --git a/templates/machine/qemux86/50_local.conf.inc b/templates/machine/qemux86/50_local.conf.inc
new file mode 100644
index 000000000..9cdc49da9
--- /dev/null
+++ b/templates/machine/qemux86/50_local.conf.inc
@@ -0,0 +1,20 @@
+MACHINE = "qemux86"
+
+# Configurations to run on VirtualBox/VMWare
+#
+# To get wide screen than default, there are a selection of resolutions
+# available:
+#
+#APPEND += "uvesafb.mode_option=1024x768-32"
+APPEND += "uvesafb.mode_option=1280x1024-32"
+#APPEND += "uvesafb.mode_option=1600x1200-32"
+#
+# To avoid corrupt boot screen by systemd message, you can use serial
+# console separated from VGA console or disable all boot messages by
+# kernel command line.
+#
+# Configuration for serial console
+APPEND += "console=ttyS0,115200n8"
+#
+# All boot message will be off
+APPEND += "quiet"
diff --git a/templates/machine/raspberrypi2/50_bblayers.conf.inc b/templates/machine/raspberrypi2/50_bblayers.conf.inc
new file mode 100644
index 000000000..8b166859c
--- /dev/null
+++ b/templates/machine/raspberrypi2/50_bblayers.conf.inc
@@ -0,0 +1 @@
+BBLAYERS =+ "${METADIR}/meta-raspberry"
diff --git a/templates/machine/raspberrypi2/50_local.conf.inc b/templates/machine/raspberrypi2/50_local.conf.inc
new file mode 100644
index 000000000..343768e91
--- /dev/null
+++ b/templates/machine/raspberrypi2/50_local.conf.inc
@@ -0,0 +1,2 @@
+MACHINE = "raspberrypi2"
+
diff --git a/templates/machine/raspberrypi3/50_bblayers.conf.inc b/templates/machine/raspberrypi3/50_bblayers.conf.inc
new file mode 100644
index 000000000..8b166859c
--- /dev/null
+++ b/templates/machine/raspberrypi3/50_bblayers.conf.inc
@@ -0,0 +1 @@
+BBLAYERS =+ "${METADIR}/meta-raspberry"
diff --git a/templates/machine/raspberrypi3/50_local.conf.inc b/templates/machine/raspberrypi3/50_local.conf.inc
new file mode 100644
index 000000000..cfdd0299d
--- /dev/null
+++ b/templates/machine/raspberrypi3/50_local.conf.inc
@@ -0,0 +1,2 @@
+MACHINE = "raspberrypi3"
+
diff --git a/templates/machine/wandboard/50_bblayers.conf.inc b/templates/machine/wandboard/50_bblayers.conf.inc
new file mode 100644
index 000000000..051a5668c
--- /dev/null
+++ b/templates/machine/wandboard/50_bblayers.conf.inc
@@ -0,0 +1,4 @@
+BBLAYERS =+ "\
+  ${METADIR}/meta-fsl-arm \
+  ${METADIR}/meta-fsm-arm-extra \
+  "
diff --git a/templates/machine/wandboard/50_local.conf.inc b/templates/machine/wandboard/50_local.conf.inc
new file mode 100644
index 000000000..42f9e5f77
--- /dev/null
+++ b/templates/machine/wandboard/50_local.conf.inc
@@ -0,0 +1,2 @@
+MACHINE = "wandboard"
+
diff --git a/templates/qemux86-64/conf/bblayers.conf.sample b/templates/qemux86-64/conf/bblayers.conf.sample
deleted file mode 100644
index acdf7efc8..000000000
--- a/templates/qemux86-64/conf/bblayers.conf.sample
+++ /dev/null
@@ -1,28 +0,0 @@
-# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
-# changes incompatibly
-LCONF_VERSION = "6"
-
-BBPATH = "${TOPDIR}"
-BBFILES ?= ""
-
-# AGL layers for QEMUx86-64
-BBLAYERS ?= " \
-  ##OEROOT##/meta \
-  ##OEROOT##/meta-yocto \
-  ##OEROOT##/meta-yocto-bsp \
-  ##OEROOT##/../meta-agl/meta-ivi-common \
-  ##OEROOT##/../meta-agl/meta-agl \
-  ##OEROOT##/../meta-agl/meta-agl-bsp \
-  ##OEROOT##/../meta-openembedded/meta-oe \
-  ##OEROOT##/../meta-openembedded/meta-multimedia \
-  ##OEROOT##/../meta-openembedded/meta-efl \
-  ##OEROOT##/../meta-openembedded/meta-networking \
-  ##OEROOT##/../meta-openembedded/meta-python \
-  ##OEROOT##/../meta-openembedded/meta-filesystems \
-  ##OEROOT##/../meta-rust \
-  "
-BBLAYERS_NON_REMOVABLE ?= " \
-  ##OEROOT##/meta \
-  ##OEROOT##/meta-yocto \
-  ##OEROOT##/../meta-agl/meta-agl \
-  "
diff --git a/templates/qemux86-64/conf/conf-notes.txt b/templates/qemux86-64/conf/conf-notes.txt
deleted file mode 120000
index fc5c6a1b8..000000000
--- a/templates/qemux86-64/conf/conf-notes.txt
+++ /dev/null
@@ -1 +0,0 @@
-../../common/conf-notes.txt
\ No newline at end of file
diff --git a/templates/qemux86-64/conf/local.conf.sample b/templates/qemux86-64/conf/local.conf.sample
deleted file mode 100644
index 8aea4a8b7..000000000
--- a/templates/qemux86-64/conf/local.conf.sample
+++ /dev/null
@@ -1,276 +0,0 @@
-# Machine Selection: QEMUx86-64
-MACHINE ?= "qemux86-64"
-
-# Comment out below if want to use QtWebkit
-PACKAGECONFIG_remove_pn-qtquick1 = "webkit"
-
-#
-# This file is your local configuration file and is where all local user settings
-# are placed. The comments in this file give some guide to the options a new user
-# to the system might want to change but pretty much any configuration option can
-# be set in this file. More adventurous users can look at local.conf.extended
-# which contains other examples of configuration which can be placed in this file
-# but new users likely won't need any of them initially.
-#
-# Lines starting with the '#' character are commented out and in some cases the
-# default values are provided as comments to show people example syntax. Enabling
-# the option is a question of removing the # character and making any change to the
-# variable as required.
-
-#
-# Machine Selection
-#
-# You need to select a specific machine to target the build with. There are a selection
-# of emulated machines available which can boot and run in the QEMU emulator:
-#
-#MACHINE ?= "qemuarm"
-#MACHINE ?= "qemumips"
-#MACHINE ?= "qemuppc"
-#MACHINE ?= "qemux86"
-#MACHINE ?= "qemux86-64"
-#
-# There are also the following hardware board target machines included for
-# demonstration purposes:
-#
-#MACHINE ?= "beaglebone"
-#MACHINE ?= "genericx86"
-#MACHINE ?= "genericx86-64"
-#MACHINE ?= "mpc8315e-rdb"
-#MACHINE ?= "edgerouter"
-#
-# This sets the default machine to be qemux86 if no other machine is selected:
-MACHINE ??= "qemux86-64"
-
-#
-# Where to place downloads
-#
-# During a first build the system will download many different source code tarballs
-# from various upstream projects. This can take a while, particularly if your network
-# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
-# can preserve this directory to speed up this part of subsequent builds. This directory
-# is safe to share between multiple builds on the same machine too.
-#
-# The default is a downloads directory under TOPDIR which is the build directory.
-#
-#DL_DIR ?= "${TOPDIR}/downloads"
-
-#
-# Where to place shared-state files
-#
-# BitBake has the capability to accelerate builds based on previously built output.
-# This is done using "shared state" files which can be thought of as cache objects
-# and this option determines where those files are placed.
-#
-# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
-# from these files if no changes were made to the configuration. If changes were made
-# to the configuration, only shared state files where the state was still valid would
-# be used (done using checksums).
-#
-# The default is a sstate-cache directory under TOPDIR.
-#
-#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
-
-#
-# Where to place the build output
-#
-# This option specifies where the bulk of the building work should be done and
-# where BitBake should place its temporary files and output. Keep in mind that
-# this includes the extraction and compilation of many applications and the toolchain
-# which can use Gigabytes of hard disk space.
-#
-# The default is a tmp directory under TOPDIR.
-#
-#TMPDIR = "${TOPDIR}/tmp"
-
-#
-# Default policy config
-#
-# The distribution setting controls which policy settings are used as defaults.
-# The default value is fine for general Yocto project use, at least initially.
-# Ultimately when creating custom policy, people will likely end up subclassing
-# these defaults.
-#
-#DISTRO ?= "poky"
-DISTRO ?= "poky-agl"
-# As an example of a subclass there is a "bleeding" edge policy configuration
-# where many versions are set to the absolute latest code from the upstream
-# source control systems. This is just mentioned here as an example, its not
-# useful to most new users.
-# DISTRO ?= "poky-bleeding"
-
-#
-# Package Management configuration
-#
-# This variable lists which packaging formats to enable. Multiple package backends
-# can be enabled at once and the first item listed in the variable will be used
-# to generate the root filesystems.
-# Options are:
-#  - 'package_deb' for debian style deb files
-#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
-#  - 'package_rpm' for rpm style packages
-# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
-# We default to rpm:
-PACKAGE_CLASSES ?= "package_rpm"
-
-#
-# SDK/ADT target architecture
-#
-# This variable specifies the architecture to build SDK/ADT items for and means
-# you can build the SDK packages for architectures other than the machine you are
-# running the build on (i.e. building i686 packages on an x86_64 host).
-# Supported values are i686 and x86_64
-#SDKMACHINE ?= "i686"
-
-#
-# Extra image configuration defaults
-#
-# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
-# images. Some of these options are added to certain image types automatically. The
-# variable can contain the following options:
-#  "dbg-pkgs"       - add -dbg packages for all installed packages
-#                     (adds symbol information for debugging/profiling)
-#  "dev-pkgs"       - add -dev packages for all installed packages
-#                     (useful if you want to develop against libs in the image)
-#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
-#                     (useful if you want to run the package test suites)
-#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
-#  "tools-debug"    - add debugging tools (gdb, strace)
-#  "eclipse-debug"  - add Eclipse remote debugging support
-#  "tools-profile"  - add profiling tools (oprofile, exmap, lttng, valgrind)
-#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
-#  "debug-tweaks"   - make an image suitable for development
-#                     e.g. ssh root access has a blank password
-# There are other application targets that can be used here too, see
-# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
-# We default to enabling the debugging tweaks.
-EXTRA_IMAGE_FEATURES = "debug-tweaks"
-
-#
-# Additional image features
-#
-# The following is a list of additional classes to use when building images which
-# enable extra features. Some available options which can be included in this variable
-# are:
-#   - 'buildstats' collect build statistics
-#   - 'image-mklibs' to reduce shared library files size for an image
-#   - 'image-prelink' in order to prelink the filesystem image
-#   - 'image-swab' to perform host system intrusion detection
-# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
-# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
-USER_CLASSES ?= "buildstats image-mklibs image-prelink"
-
-#
-# Runtime testing of images
-#
-# The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
-#
-# Interactive shell configuration
-#
-# Under certain circumstances the system may need input from you and to do this it
-# can launch an interactive shell. It needs to do this since the build is
-# multithreaded and needs to be able to handle the case where more than one parallel
-# process may require the user's attention. The default is iterate over the available
-# terminal types to find one that works.
-#
-# Examples of the occasions this may happen are when resolving patches which cannot
-# be applied, to use the devshell or the kernel menuconfig
-#
-# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
-# Note: currently, Konsole support only works for KDE 3.x due to the way
-# newer Konsole versions behave
-#OE_TERMINAL = "auto"
-# By default disable interactive patch resolution (tasks will just fail instead):
-PATCHRESOLVE = "noop"
-
-#
-# Disk Space Monitoring during the build
-#
-# Monitor the disk space during the build. If there is less that 1GB of space or less
-# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
-# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
-# of the build. The reason for this is that running completely out of space can corrupt
-# files and damages the build in ways which may not be easily recoverable.
-BB_DISKMON_DIRS = "\
-    STOPTASKS,${TMPDIR},1G,100K \
-    STOPTASKS,${DL_DIR},1G,100K \
-    STOPTASKS,${SSTATE_DIR},1G,100K \
-    ABORT,${TMPDIR},100M,1K \
-    ABORT,${DL_DIR},100M,1K \
-    ABORT,${SSTATE_DIR},100M,1K"
-
-#
-# Shared-state files from other locations
-#
-# As mentioned above, shared state files are prebuilt cache data objects which can
-# used to accelerate build time. This variable can be used to configure the system
-# to search other mirror locations for these objects before it builds the data itself.
-#
-# This can be a filesystem directory, or a remote url such as http or ftp. These
-# would contain the sstate-cache results from previous builds (possibly from other
-# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
-# cache locations to check for the shared objects.
-# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
-# at the end as shown in the examples below. This will be substituted with the
-# correct path within the directory structure.
-#SSTATE_MIRRORS ?= "\
-#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
-#file://.* file:///some/local/dir/sstate/PATH"
-
-
-#
-# Qemu configuration
-#
-# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. This assumes there is a
-# libsdl library available on your build system.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
-PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-ASSUME_PROVIDED += "libsdl-native"
-
-###############
-#
-# AGL specifics
-#
-###############
-
-# AGL includes all kernel modules here for ease-of-use during development.
-# Comment this out to be able to select the kernel modules yourself.
-IMAGE_INSTALL_append = " kernel-modules"
-
-# Likewise as we included all kernel modules by default in the filesystem,
-# we do not need a separate tarball stored.
-# Comment this out to receive the separate modules tarbal again.
-MODULE_TARBALL_DEPLOY ?= "0"
-
-# Configurations to run on VirtualBox/VMWare
-#
-# To get wide screen than default, there are a selection of resolutions
-# available:
-#
-#APPEND += "uvesafb.mode_option=1024x768-32"
-APPEND += "uvesafb.mode_option=1280x1024-32"
-#APPEND += "uvesafb.mode_option=1600x1200-32"
-#
-# To avoid corrupt boot screen by systemd message, you can use serial
-# console separated from VGA console or disable all boot messages by
-# kernel command line.
-#
-# Configuration for serial console
-APPEND += "console=ttyS0,115200n8"
-#
-# All boot message will be off
-APPEND += "quiet"
-
-###############
-# /END AGL
-###############
-
-
-# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
-# track the version of this file when it was generated. This can safely be ignored if
-# this doesn't mean anything to you.
-CONF_VERSION = "1"
diff --git a/templates/qemux86/conf/bblayers.conf.sample b/templates/qemux86/conf/bblayers.conf.sample
deleted file mode 100644
index acdf7efc8..000000000
--- a/templates/qemux86/conf/bblayers.conf.sample
+++ /dev/null
@@ -1,28 +0,0 @@
-# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
-# changes incompatibly
-LCONF_VERSION = "6"
-
-BBPATH = "${TOPDIR}"
-BBFILES ?= ""
-
-# AGL layers for QEMUx86-64
-BBLAYERS ?= " \
-  ##OEROOT##/meta \
-  ##OEROOT##/meta-yocto \
-  ##OEROOT##/meta-yocto-bsp \
-  ##OEROOT##/../meta-agl/meta-ivi-common \
-  ##OEROOT##/../meta-agl/meta-agl \
-  ##OEROOT##/../meta-agl/meta-agl-bsp \
-  ##OEROOT##/../meta-openembedded/meta-oe \
-  ##OEROOT##/../meta-openembedded/meta-multimedia \
-  ##OEROOT##/../meta-openembedded/meta-efl \
-  ##OEROOT##/../meta-openembedded/meta-networking \
-  ##OEROOT##/../meta-openembedded/meta-python \
-  ##OEROOT##/../meta-openembedded/meta-filesystems \
-  ##OEROOT##/../meta-rust \
-  "
-BBLAYERS_NON_REMOVABLE ?= " \
-  ##OEROOT##/meta \
-  ##OEROOT##/meta-yocto \
-  ##OEROOT##/../meta-agl/meta-agl \
-  "
diff --git a/templates/qemux86/conf/conf-notes.txt b/templates/qemux86/conf/conf-notes.txt
deleted file mode 120000
index fc5c6a1b8..000000000
--- a/templates/qemux86/conf/conf-notes.txt
+++ /dev/null
@@ -1 +0,0 @@
-../../common/conf-notes.txt
\ No newline at end of file
diff --git a/templates/qemux86/conf/local.conf.sample b/templates/qemux86/conf/local.conf.sample
deleted file mode 100644
index 4b5bcf968..000000000
--- a/templates/qemux86/conf/local.conf.sample
+++ /dev/null
@@ -1,276 +0,0 @@
-# Machine Selection: QEMUx86
-MACHINE ?= "qemux86"
-
-# Comment out below if want to use QtWebkit
-PACKAGECONFIG_remove_pn-qtquick1 = "webkit"
-
-#
-# This file is your local configuration file and is where all local user settings
-# are placed. The comments in this file give some guide to the options a new user
-# to the system might want to change but pretty much any configuration option can
-# be set in this file. More adventurous users can look at local.conf.extended
-# which contains other examples of configuration which can be placed in this file
-# but new users likely won't need any of them initially.
-#
-# Lines starting with the '#' character are commented out and in some cases the
-# default values are provided as comments to show people example syntax. Enabling
-# the option is a question of removing the # character and making any change to the
-# variable as required.
-
-#
-# Machine Selection
-#
-# You need to select a specific machine to target the build with. There are a selection
-# of emulated machines available which can boot and run in the QEMU emulator:
-#
-#MACHINE ?= "qemuarm"
-#MACHINE ?= "qemumips"
-#MACHINE ?= "qemuppc"
-#MACHINE ?= "qemux86"
-#MACHINE ?= "qemux86-64"
-#
-# There are also the following hardware board target machines included for
-# demonstration purposes:
-#
-#MACHINE ?= "beaglebone"
-#MACHINE ?= "genericx86"
-#MACHINE ?= "genericx86-64"
-#MACHINE ?= "mpc8315e-rdb"
-#MACHINE ?= "edgerouter"
-#
-# This sets the default machine to be qemux86 if no other machine is selected:
-MACHINE ??= "qemux86-64"
-
-#
-# Where to place downloads
-#
-# During a first build the system will download many different source code tarballs
-# from various upstream projects. This can take a while, particularly if your network
-# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
-# can preserve this directory to speed up this part of subsequent builds. This directory
-# is safe to share between multiple builds on the same machine too.
-#
-# The default is a downloads directory under TOPDIR which is the build directory.
-#
-#DL_DIR ?= "${TOPDIR}/downloads"
-
-#
-# Where to place shared-state files
-#
-# BitBake has the capability to accelerate builds based on previously built output.
-# This is done using "shared state" files which can be thought of as cache objects
-# and this option determines where those files are placed.
-#
-# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
-# from these files if no changes were made to the configuration. If changes were made
-# to the configuration, only shared state files where the state was still valid would
-# be used (done using checksums).
-#
-# The default is a sstate-cache directory under TOPDIR.
-#
-#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
-
-#
-# Where to place the build output
-#
-# This option specifies where the bulk of the building work should be done and
-# where BitBake should place its temporary files and output. Keep in mind that
-# this includes the extraction and compilation of many applications and the toolchain
-# which can use Gigabytes of hard disk space.
-#
-# The default is a tmp directory under TOPDIR.
-#
-#TMPDIR = "${TOPDIR}/tmp"
-
-#
-# Default policy config
-#
-# The distribution setting controls which policy settings are used as defaults.
-# The default value is fine for general Yocto project use, at least initially.
-# Ultimately when creating custom policy, people will likely end up subclassing
-# these defaults.
-#
-#DISTRO ?= "poky"
-DISTRO ?= "poky-agl"
-# As an example of a subclass there is a "bleeding" edge policy configuration
-# where many versions are set to the absolute latest code from the upstream
-# source control systems. This is just mentioned here as an example, its not
-# useful to most new users.
-# DISTRO ?= "poky-bleeding"
-
-#
-# Package Management configuration
-#
-# This variable lists which packaging formats to enable. Multiple package backends
-# can be enabled at once and the first item listed in the variable will be used
-# to generate the root filesystems.
-# Options are:
-#  - 'package_deb' for debian style deb files
-#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
-#  - 'package_rpm' for rpm style packages
-# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
-# We default to rpm:
-PACKAGE_CLASSES ?= "package_rpm"
-
-#
-# SDK/ADT target architecture
-#
-# This variable specifies the architecture to build SDK/ADT items for and means
-# you can build the SDK packages for architectures other than the machine you are
-# running the build on (i.e. building i686 packages on an x86_64 host).
-# Supported values are i686 and x86_64
-#SDKMACHINE ?= "i686"
-
-#
-# Extra image configuration defaults
-#
-# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
-# images. Some of these options are added to certain image types automatically. The
-# variable can contain the following options:
-#  "dbg-pkgs"       - add -dbg packages for all installed packages
-#                     (adds symbol information for debugging/profiling)
-#  "dev-pkgs"       - add -dev packages for all installed packages
-#                     (useful if you want to develop against libs in the image)
-#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
-#                     (useful if you want to run the package test suites)
-#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
-#  "tools-debug"    - add debugging tools (gdb, strace)
-#  "eclipse-debug"  - add Eclipse remote debugging support
-#  "tools-profile"  - add profiling tools (oprofile, exmap, lttng, valgrind)
-#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
-#  "debug-tweaks"   - make an image suitable for development
-#                     e.g. ssh root access has a blank password
-# There are other application targets that can be used here too, see
-# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
-# We default to enabling the debugging tweaks.
-EXTRA_IMAGE_FEATURES = "debug-tweaks"
-
-#
-# Additional image features
-#
-# The following is a list of additional classes to use when building images which
-# enable extra features. Some available options which can be included in this variable
-# are:
-#   - 'buildstats' collect build statistics
-#   - 'image-mklibs' to reduce shared library files size for an image
-#   - 'image-prelink' in order to prelink the filesystem image
-#   - 'image-swab' to perform host system intrusion detection
-# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
-# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
-USER_CLASSES ?= "buildstats image-mklibs image-prelink"
-
-#
-# Runtime testing of images
-#
-# The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
-#
-# Interactive shell configuration
-#
-# Under certain circumstances the system may need input from you and to do this it
-# can launch an interactive shell. It needs to do this since the build is
-# multithreaded and needs to be able to handle the case where more than one parallel
-# process may require the user's attention. The default is iterate over the available
-# terminal types to find one that works.
-#
-# Examples of the occasions this may happen are when resolving patches which cannot
-# be applied, to use the devshell or the kernel menuconfig
-#
-# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
-# Note: currently, Konsole support only works for KDE 3.x due to the way
-# newer Konsole versions behave
-#OE_TERMINAL = "auto"
-# By default disable interactive patch resolution (tasks will just fail instead):
-PATCHRESOLVE = "noop"
-
-#
-# Disk Space Monitoring during the build
-#
-# Monitor the disk space during the build. If there is less that 1GB of space or less
-# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
-# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
-# of the build. The reason for this is that running completely out of space can corrupt
-# files and damages the build in ways which may not be easily recoverable.
-BB_DISKMON_DIRS = "\
-    STOPTASKS,${TMPDIR},1G,100K \
-    STOPTASKS,${DL_DIR},1G,100K \
-    STOPTASKS,${SSTATE_DIR},1G,100K \
-    ABORT,${TMPDIR},100M,1K \
-    ABORT,${DL_DIR},100M,1K \
-    ABORT,${SSTATE_DIR},100M,1K"
-
-#
-# Shared-state files from other locations
-#
-# As mentioned above, shared state files are prebuilt cache data objects which can
-# used to accelerate build time. This variable can be used to configure the system
-# to search other mirror locations for these objects before it builds the data itself.
-#
-# This can be a filesystem directory, or a remote url such as http or ftp. These
-# would contain the sstate-cache results from previous builds (possibly from other
-# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
-# cache locations to check for the shared objects.
-# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
-# at the end as shown in the examples below. This will be substituted with the
-# correct path within the directory structure.
-#SSTATE_MIRRORS ?= "\
-#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
-#file://.* file:///some/local/dir/sstate/PATH"
-
-
-#
-# Qemu configuration
-#
-# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. This assumes there is a
-# libsdl library available on your build system.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
-PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-ASSUME_PROVIDED += "libsdl-native"
-
-###############
-#
-# AGL specifics
-#
-###############
-
-# AGL includes all kernel modules here for ease-of-use during development.
-# Comment this out to be able to select the kernel modules yourself.
-IMAGE_INSTALL_append = " kernel-modules"
-
-# Likewise as we included all kernel modules by default in the filesystem,
-# we do not need a separate tarball stored.
-# Comment this out to receive the separate modules tarbal again.
-MODULE_TARBALL_DEPLOY ?= "0"
-
-# Configurations to run on VirtualBox/VMWare
-#
-# To get wide screen than default, there are a selection of resolutions
-# available:
-#
-#APPEND += "uvesafb.mode_option=1024x768-32"
-APPEND += "uvesafb.mode_option=1280x1024-32"
-#APPEND += "uvesafb.mode_option=1600x1200-32"
-#
-# To avoid corrupt boot screen by systemd message, you can use serial
-# console separated from VGA console or disable all boot messages by
-# kernel command line.
-#
-# Configuration for serial console
-APPEND += "console=ttyS0,115200n8"
-#
-# All boot message will be off
-APPEND += "quiet"
-
-###############
-# /END AGL
-###############
-
-
-# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
-# track the version of this file when it was generated. This can safely be ignored if
-# this doesn't mean anything to you.
-CONF_VERSION = "1"
diff --git a/templates/raspberrypi2/conf/bblayers.conf.sample b/templates/raspberrypi2/conf/bblayers.conf.sample
deleted file mode 100644
index e87a65020..000000000
--- a/templates/raspberrypi2/conf/bblayers.conf.sample
+++ /dev/null
@@ -1,29 +0,0 @@
-# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
-# changes incompatibly
-LCONF_VERSION = "6"
-
-BBPATH = "${TOPDIR}"
-BBFILES ?= ""
-
-# AGL layers for TI vayu
-BBLAYERS ?= " \
-  ##OEROOT##/meta \
-  ##OEROOT##/meta-yocto \
-  ##OEROOT##/meta-yocto-bsp \
-  ##OEROOT##/../meta-agl/meta-ivi-common \
-  ##OEROOT##/../meta-agl/meta-agl \
-  ##OEROOT##/../meta-agl/meta-agl-bsp \
-  ##OEROOT##/../meta-openembedded/meta-oe \
-  ##OEROOT##/../meta-openembedded/meta-multimedia \
-  ##OEROOT##/../meta-openembedded/meta-efl \
-  ##OEROOT##/../meta-openembedded/meta-networking \
-  ##OEROOT##/../meta-openembedded/meta-python \
-  ##OEROOT##/../meta-openembedded/meta-filesystems \
-  ##OEROOT##/../meta-raspberrypi \
-  ##OEROOT##/../meta-rust \
-  "
-BBLAYERS_NON_REMOVABLE ?= " \
-  ##OEROOT##/meta \
-  ##OEROOT##/meta-yocto \
-  ##OEROOT##/../meta-agl/meta-agl \
-  "
diff --git a/templates/raspberrypi2/conf/conf-notes.txt b/templates/raspberrypi2/conf/conf-notes.txt
deleted file mode 120000
index fc5c6a1b8..000000000
--- a/templates/raspberrypi2/conf/conf-notes.txt
+++ /dev/null
@@ -1 +0,0 @@
-../../common/conf-notes.txt
\ No newline at end of file
diff --git a/templates/raspberrypi2/conf/local.conf.sample b/templates/raspberrypi2/conf/local.conf.sample
deleted file mode 100644
index f4ea56058..000000000
--- a/templates/raspberrypi2/conf/local.conf.sample
+++ /dev/null
@@ -1,261 +0,0 @@
-#
-# AGL
-#####
-
-MACHINE = "raspberrypi2"
-
-#
-# END AGL
-#########
-
-#
-# This file is your local configuration file and is where all local user settings
-# are placed. The comments in this file give some guide to the options a new user
-# to the system might want to change but pretty much any configuration option can
-# be set in this file. More adventurous users can look at local.conf.extended
-# which contains other examples of configuration which can be placed in this file
-# but new users likely won't need any of them initially.
-#
-# Lines starting with the '#' character are commented out and in some cases the
-# default values are provided as comments to show people example syntax. Enabling
-# the option is a question of removing the # character and making any change to the
-# variable as required.
-
-#
-# Machine Selection
-#
-# You need to select a specific machine to target the build with. There are a selection
-# of emulated machines available which can boot and run in the QEMU emulator:
-#
-#MACHINE ?= "qemuarm"
-#MACHINE ?= "qemumips"
-#MACHINE ?= "qemuppc"
-#MACHINE ?= "qemux86"
-#MACHINE ?= "qemux86-64"
-#
-# There are also the following hardware board target machines included for
-# demonstration purposes:
-#
-#MACHINE ?= "beaglebone"
-#MACHINE ?= "genericx86"
-#MACHINE ?= "genericx86-64"
-#MACHINE ?= "mpc8315e-rdb"
-#MACHINE ?= "edgerouter"
-#
-# This sets the default machine to be qemux86 if no other machine is selected:
-MACHINE ??= "qemux86-64"
-
-#
-# Where to place downloads
-#
-# During a first build the system will download many different source code tarballs
-# from various upstream projects. This can take a while, particularly if your network
-# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
-# can preserve this directory to speed up this part of subsequent builds. This directory
-# is safe to share between multiple builds on the same machine too.
-#
-# The default is a downloads directory under TOPDIR which is the build directory.
-#
-#DL_DIR ?= "${TOPDIR}/downloads"
-
-#
-# Where to place shared-state files
-#
-# BitBake has the capability to accelerate builds based on previously built output.
-# This is done using "shared state" files which can be thought of as cache objects
-# and this option determines where those files are placed.
-#
-# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
-# from these files if no changes were made to the configuration. If changes were made
-# to the configuration, only shared state files where the state was still valid would
-# be used (done using checksums).
-#
-# The default is a sstate-cache directory under TOPDIR.
-#
-#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
-
-#
-# Where to place the build output
-#
-# This option specifies where the bulk of the building work should be done and
-# where BitBake should place its temporary files and output. Keep in mind that
-# this includes the extraction and compilation of many applications and the toolchain
-# which can use Gigabytes of hard disk space.
-#
-# The default is a tmp directory under TOPDIR.
-#
-#TMPDIR = "${TOPDIR}/tmp"
-
-#
-# Default policy config
-#
-# The distribution setting controls which policy settings are used as defaults.
-# The default value is fine for general Yocto project use, at least initially.
-# Ultimately when creating custom policy, people will likely end up subclassing
-# these defaults.
-#
-#DISTRO ?= "poky"
-DISTRO ?= "poky-agl"
-# As an example of a subclass there is a "bleeding" edge policy configuration
-# where many versions are set to the absolute latest code from the upstream
-# source control systems. This is just mentioned here as an example, its not
-# useful to most new users.
-# DISTRO ?= "poky-bleeding"
-
-#
-# Package Management configuration
-#
-# This variable lists which packaging formats to enable. Multiple package backends
-# can be enabled at once and the first item listed in the variable will be used
-# to generate the root filesystems.
-# Options are:
-#  - 'package_deb' for debian style deb files
-#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
-#  - 'package_rpm' for rpm style packages
-# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
-# We default to rpm:
-PACKAGE_CLASSES ?= "package_rpm"
-
-#
-# SDK/ADT target architecture
-#
-# This variable specifies the architecture to build SDK/ADT items for and means
-# you can build the SDK packages for architectures other than the machine you are
-# running the build on (i.e. building i686 packages on an x86_64 host).
-# Supported values are i686 and x86_64
-#SDKMACHINE ?= "i686"
-
-#
-# Extra image configuration defaults
-#
-# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
-# images. Some of these options are added to certain image types automatically. The
-# variable can contain the following options:
-#  "dbg-pkgs"       - add -dbg packages for all installed packages
-#                     (adds symbol information for debugging/profiling)
-#  "dev-pkgs"       - add -dev packages for all installed packages
-#                     (useful if you want to develop against libs in the image)
-#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
-#                     (useful if you want to run the package test suites)
-#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
-#  "tools-debug"    - add debugging tools (gdb, strace)
-#  "eclipse-debug"  - add Eclipse remote debugging support
-#  "tools-profile"  - add profiling tools (oprofile, exmap, lttng, valgrind)
-#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
-#  "debug-tweaks"   - make an image suitable for development
-#                     e.g. ssh root access has a blank password
-# There are other application targets that can be used here too, see
-# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
-# We default to enabling the debugging tweaks.
-EXTRA_IMAGE_FEATURES = "debug-tweaks"
-
-#
-# Additional image features
-#
-# The following is a list of additional classes to use when building images which
-# enable extra features. Some available options which can be included in this variable
-# are:
-#   - 'buildstats' collect build statistics
-#   - 'image-mklibs' to reduce shared library files size for an image
-#   - 'image-prelink' in order to prelink the filesystem image
-#   - 'image-swab' to perform host system intrusion detection
-# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
-# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
-USER_CLASSES ?= "buildstats image-mklibs image-prelink"
-
-#
-# Runtime testing of images
-#
-# The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
-#
-# Interactive shell configuration
-#
-# Under certain circumstances the system may need input from you and to do this it
-# can launch an interactive shell. It needs to do this since the build is
-# multithreaded and needs to be able to handle the case where more than one parallel
-# process may require the user's attention. The default is iterate over the available
-# terminal types to find one that works.
-#
-# Examples of the occasions this may happen are when resolving patches which cannot
-# be applied, to use the devshell or the kernel menuconfig
-#
-# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
-# Note: currently, Konsole support only works for KDE 3.x due to the way
-# newer Konsole versions behave
-#OE_TERMINAL = "auto"
-# By default disable interactive patch resolution (tasks will just fail instead):
-PATCHRESOLVE = "noop"
-
-#
-# Disk Space Monitoring during the build
-#
-# Monitor the disk space during the build. If there is less that 1GB of space or less
-# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
-# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
-# of the build. The reason for this is that running completely out of space can corrupt
-# files and damages the build in ways which may not be easily recoverable.
-BB_DISKMON_DIRS = "\
-    STOPTASKS,${TMPDIR},1G,100K \
-    STOPTASKS,${DL_DIR},1G,100K \
-    STOPTASKS,${SSTATE_DIR},1G,100K \
-    ABORT,${TMPDIR},100M,1K \
-    ABORT,${DL_DIR},100M,1K \
-    ABORT,${SSTATE_DIR},100M,1K"
-
-#
-# Shared-state files from other locations
-#
-# As mentioned above, shared state files are prebuilt cache data objects which can
-# used to accelerate build time. This variable can be used to configure the system
-# to search other mirror locations for these objects before it builds the data itself.
-#
-# This can be a filesystem directory, or a remote url such as http or ftp. These
-# would contain the sstate-cache results from previous builds (possibly from other
-# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
-# cache locations to check for the shared objects.
-# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
-# at the end as shown in the examples below. This will be substituted with the
-# correct path within the directory structure.
-#SSTATE_MIRRORS ?= "\
-#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
-#file://.* file:///some/local/dir/sstate/PATH"
-
-
-#
-# Qemu configuration
-#
-# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. This assumes there is a
-# libsdl library available on your build system.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
-PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-ASSUME_PROVIDED += "libsdl-native"
-
-###############
-#
-# AGL specifics
-#
-###############
-
-# AGL includes all kernel modules here for ease-of-use during development.
-# Comment this out to be able to select the kernel modules yourself.
-IMAGE_INSTALL_append = " kernel-modules"
-
-# Likewise as we included all kernel modules by default in the filesystem,
-# we do not need a separate tarball stored.
-# Comment this out to receive the separate modules tarbal again.
-MODULE_TARBALL_DEPLOY ?= "0"
-
-###############
-# /END AGL
-###############
-
-
-# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
-# track the version of this file when it was generated. This can safely be ignored if
-# this doesn't mean anything to you.
-CONF_VERSION = "1"
diff --git a/templates/raspberrypi3/conf/bblayers.conf.sample b/templates/raspberrypi3/conf/bblayers.conf.sample
deleted file mode 100644
index e87a65020..000000000
--- a/templates/raspberrypi3/conf/bblayers.conf.sample
+++ /dev/null
@@ -1,29 +0,0 @@
-# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
-# changes incompatibly
-LCONF_VERSION = "6"
-
-BBPATH = "${TOPDIR}"
-BBFILES ?= ""
-
-# AGL layers for TI vayu
-BBLAYERS ?= " \
-  ##OEROOT##/meta \
-  ##OEROOT##/meta-yocto \
-  ##OEROOT##/meta-yocto-bsp \
-  ##OEROOT##/../meta-agl/meta-ivi-common \
-  ##OEROOT##/../meta-agl/meta-agl \
-  ##OEROOT##/../meta-agl/meta-agl-bsp \
-  ##OEROOT##/../meta-openembedded/meta-oe \
-  ##OEROOT##/../meta-openembedded/meta-multimedia \
-  ##OEROOT##/../meta-openembedded/meta-efl \
-  ##OEROOT##/../meta-openembedded/meta-networking \
-  ##OEROOT##/../meta-openembedded/meta-python \
-  ##OEROOT##/../meta-openembedded/meta-filesystems \
-  ##OEROOT##/../meta-raspberrypi \
-  ##OEROOT##/../meta-rust \
-  "
-BBLAYERS_NON_REMOVABLE ?= " \
-  ##OEROOT##/meta \
-  ##OEROOT##/meta-yocto \
-  ##OEROOT##/../meta-agl/meta-agl \
-  "
diff --git a/templates/raspberrypi3/conf/conf-notes.txt b/templates/raspberrypi3/conf/conf-notes.txt
deleted file mode 120000
index fc5c6a1b8..000000000
--- a/templates/raspberrypi3/conf/conf-notes.txt
+++ /dev/null
@@ -1 +0,0 @@
-../../common/conf-notes.txt
\ No newline at end of file
diff --git a/templates/wandboard/conf/bblayers.conf.sample b/templates/wandboard/conf/bblayers.conf.sample
deleted file mode 100644
index e3b6a881e..000000000
--- a/templates/wandboard/conf/bblayers.conf.sample
+++ /dev/null
@@ -1,30 +0,0 @@
-# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
-# changes incompatibly
-LCONF_VERSION = "6"
-
-BBPATH = "${TOPDIR}"
-BBFILES ?= ""
-
-# AGL layers for Wandboard (NXP/Freescale)
-BBLAYERS ?= " \
-  ##OEROOT##/meta \
-  ##OEROOT##/meta-yocto \
-  ##OEROOT##/meta-yocto-bsp \
-  ##OEROOT##/../meta-agl/meta-ivi-common \
-  ##OEROOT##/../meta-agl/meta-agl \
-  ##OEROOT##/../meta-agl/meta-agl-bsp \
-  ##OEROOT##/../meta-openembedded/meta-oe \
-  ##OEROOT##/../meta-openembedded/meta-multimedia \
-  ##OEROOT##/../meta-openembedded/meta-efl \
-  ##OEROOT##/../meta-openembedded/meta-networking \
-  ##OEROOT##/../meta-openembedded/meta-python \
-  ##OEROOT##/../meta-openembedded/meta-filesystems \
-  ##OEROOT##/../meta-fsl-arm \
-  ##OEROOT##/../meta-fsl-arm-extra \
-  ##OEROOT##/../meta-rust \
-  "
-BBLAYERS_NON_REMOVABLE ?= " \
-  ##OEROOT##/meta \
-  ##OEROOT##/meta-yocto \
-  ##OEROOT##/../meta-agl/meta-agl \
-  "
diff --git a/templates/wandboard/conf/conf-notes.txt b/templates/wandboard/conf/conf-notes.txt
deleted file mode 120000
index fc5c6a1b8..000000000
--- a/templates/wandboard/conf/conf-notes.txt
+++ /dev/null
@@ -1 +0,0 @@
-../../common/conf-notes.txt
\ No newline at end of file
diff --git a/templates/wandboard/conf/local.conf.sample b/templates/wandboard/conf/local.conf.sample
deleted file mode 100644
index f32dcd440..000000000
--- a/templates/wandboard/conf/local.conf.sample
+++ /dev/null
@@ -1,275 +0,0 @@
-# Machine Selection: wandboard
-MACHINE = "wandboard"
-# Comment out below if want to use QtWebkit
-PACKAGECONFIG_remove_pn-qtquick1 = "webkit"
-
-#
-# This file is your local configuration file and is where all local user settings
-# are placed. The comments in this file give some guide to the options a new user
-# to the system might want to change but pretty much any configuration option can
-# be set in this file. More adventurous users can look at local.conf.extended
-# which contains other examples of configuration which can be placed in this file
-# but new users likely won't need any of them initially.
-#
-# Lines starting with the '#' character are commented out and in some cases the
-# default values are provided as comments to show people example syntax. Enabling
-# the option is a question of removing the # character and making any change to the
-# variable as required.
-
-#
-# Machine Selection
-#
-# You need to select a specific machine to target the build with. There are a selection
-# of emulated machines available which can boot and run in the QEMU emulator:
-#
-#MACHINE ?= "qemuarm"
-#MACHINE ?= "qemumips"
-#MACHINE ?= "qemuppc"
-#MACHINE ?= "qemux86"
-#MACHINE ?= "qemux86-64"
-#
-# There are also the following hardware board target machines included for
-# demonstration purposes:
-#
-#MACHINE ?= "beaglebone"
-#MACHINE ?= "genericx86"
-#MACHINE ?= "genericx86-64"
-#MACHINE ?= "mpc8315e-rdb"
-#MACHINE ?= "edgerouter"
-#
-# This sets the default machine to be qemux86 if no other machine is selected:
-MACHINE ??= "qemux86-64"
-
-#
-# Where to place downloads
-#
-# During a first build the system will download many different source code tarballs
-# from various upstream projects. This can take a while, particularly if your network
-# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
-# can preserve this directory to speed up this part of subsequent builds. This directory
-# is safe to share between multiple builds on the same machine too.
-#
-# The default is a downloads directory under TOPDIR which is the build directory.
-#
-#DL_DIR ?= "${TOPDIR}/downloads"
-
-#
-# Where to place shared-state files
-#
-# BitBake has the capability to accelerate builds based on previously built output.
-# This is done using "shared state" files which can be thought of as cache objects
-# and this option determines where those files are placed.
-#
-# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
-# from these files if no changes were made to the configuration. If changes were made
-# to the configuration, only shared state files where the state was still valid would
-# be used (done using checksums).
-#
-# The default is a sstate-cache directory under TOPDIR.
-#
-#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
-
-#
-# Where to place the build output
-#
-# This option specifies where the bulk of the building work should be done and
-# where BitBake should place its temporary files and output. Keep in mind that
-# this includes the extraction and compilation of many applications and the toolchain
-# which can use Gigabytes of hard disk space.
-#
-# The default is a tmp directory under TOPDIR.
-#
-#TMPDIR = "${TOPDIR}/tmp"
-
-#
-# Default policy config
-#
-# The distribution setting controls which policy settings are used as defaults.
-# The default value is fine for general Yocto project use, at least initially.
-# Ultimately when creating custom policy, people will likely end up subclassing
-# these defaults.
-#
-#DISTRO ?= "poky"
-DISTRO ?= "poky-agl"
-# As an example of a subclass there is a "bleeding" edge policy configuration
-# where many versions are set to the absolute latest code from the upstream
-# source control systems. This is just mentioned here as an example, its not
-# useful to most new users.
-# DISTRO ?= "poky-bleeding"
-
-#
-# Package Management configuration
-#
-# This variable lists which packaging formats to enable. Multiple package backends
-# can be enabled at once and the first item listed in the variable will be used
-# to generate the root filesystems.
-# Options are:
-#  - 'package_deb' for debian style deb files
-#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
-#  - 'package_rpm' for rpm style packages
-# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
-# We default to rpm:
-PACKAGE_CLASSES ?= "package_rpm"
-
-#
-# SDK/ADT target architecture
-#
-# This variable specifies the architecture to build SDK/ADT items for and means
-# you can build the SDK packages for architectures other than the machine you are
-# running the build on (i.e. building i686 packages on an x86_64 host).
-# Supported values are i686 and x86_64
-#SDKMACHINE ?= "i686"
-
-#
-# Extra image configuration defaults
-#
-# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
-# images. Some of these options are added to certain image types automatically. The
-# variable can contain the following options:
-#  "dbg-pkgs"       - add -dbg packages for all installed packages
-#                     (adds symbol information for debugging/profiling)
-#  "dev-pkgs"       - add -dev packages for all installed packages
-#                     (useful if you want to develop against libs in the image)
-#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
-#                     (useful if you want to run the package test suites)
-#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
-#  "tools-debug"    - add debugging tools (gdb, strace)
-#  "eclipse-debug"  - add Eclipse remote debugging support
-#  "tools-profile"  - add profiling tools (oprofile, exmap, lttng, valgrind)
-#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
-#  "debug-tweaks"   - make an image suitable for development
-#                     e.g. ssh root access has a blank password
-# There are other application targets that can be used here too, see
-# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
-# We default to enabling the debugging tweaks.
-EXTRA_IMAGE_FEATURES = "debug-tweaks"
-
-#
-# Additional image features
-#
-# The following is a list of additional classes to use when building images which
-# enable extra features. Some available options which can be included in this variable
-# are:
-#   - 'buildstats' collect build statistics
-#   - 'image-mklibs' to reduce shared library files size for an image
-#   - 'image-prelink' in order to prelink the filesystem image
-#   - 'image-swab' to perform host system intrusion detection
-# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
-# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
-USER_CLASSES ?= "buildstats image-mklibs image-prelink"
-
-#
-# Runtime testing of images
-#
-# The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
-#
-# Interactive shell configuration
-#
-# Under certain circumstances the system may need input from you and to do this it
-# can launch an interactive shell. It needs to do this since the build is
-# multithreaded and needs to be able to handle the case where more than one parallel
-# process may require the user's attention. The default is iterate over the available
-# terminal types to find one that works.
-#
-# Examples of the occasions this may happen are when resolving patches which cannot
-# be applied, to use the devshell or the kernel menuconfig
-#
-# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
-# Note: currently, Konsole support only works for KDE 3.x due to the way
-# newer Konsole versions behave
-#OE_TERMINAL = "auto"
-# By default disable interactive patch resolution (tasks will just fail instead):
-PATCHRESOLVE = "noop"
-
-#
-# Disk Space Monitoring during the build
-#
-# Monitor the disk space during the build. If there is less that 1GB of space or less
-# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
-# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
-# of the build. The reason for this is that running completely out of space can corrupt
-# files and damages the build in ways which may not be easily recoverable.
-BB_DISKMON_DIRS = "\
-    STOPTASKS,${TMPDIR},1G,100K \
-    STOPTASKS,${DL_DIR},1G,100K \
-    STOPTASKS,${SSTATE_DIR},1G,100K \
-    ABORT,${TMPDIR},100M,1K \
-    ABORT,${DL_DIR},100M,1K \
-    ABORT,${SSTATE_DIR},100M,1K"
-
-#
-# Shared-state files from other locations
-#
-# As mentioned above, shared state files are prebuilt cache data objects which can
-# used to accelerate build time. This variable can be used to configure the system
-# to search other mirror locations for these objects before it builds the data itself.
-#
-# This can be a filesystem directory, or a remote url such as http or ftp. These
-# would contain the sstate-cache results from previous builds (possibly from other
-# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
-# cache locations to check for the shared objects.
-# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
-# at the end as shown in the examples below. This will be substituted with the
-# correct path within the directory structure.
-#SSTATE_MIRRORS ?= "\
-#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
-#file://.* file:///some/local/dir/sstate/PATH"
-
-
-#
-# Qemu configuration
-#
-# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. This assumes there is a
-# libsdl library available on your build system.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
-PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-ASSUME_PROVIDED += "libsdl-native"
-
-###############
-#
-# AGL specifics
-#
-###############
-
-# AGL includes all kernel modules here for ease-of-use during development.
-# Comment this out to be able to select the kernel modules yourself.
-IMAGE_INSTALL_append = " kernel-modules"
-
-# Likewise as we included all kernel modules by default in the filesystem,
-# we do not need a separate tarball stored.
-# Comment this out to receive the separate modules tarbal again.
-MODULE_TARBALL_DEPLOY ?= "0"
-
-# Configurations to run on VirtualBox/VMWare
-#
-# To get wide screen than default, there are a selection of resolutions
-# available:
-#
-#APPEND += "uvesafb.mode_option=1024x768-32"
-#APPEND += "uvesafb.mode_option=1280x1024-32"
-#APPEND += "uvesafb.mode_option=1600x1200-32"
-#
-# To avoid corrupt boot screen by systemd message, you can use serial
-# console separated from VGA console or disable all boot messages by
-# kernel command line.
-#
-# Configuration for serial console
-#APPEND += "console=ttyS0,115200n8"
-#
-# All boot message will be off
-#APPEND += "quiet"
-
-###############
-# /END AGL
-###############
-
-
-# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
-# track the version of this file when it was generated. This can safely be ignored if
-# this doesn't mean anything to you.
-CONF_VERSION = "1"