inherit sdcard_image-rpi

IMAGE_CMD_rpi-sdimg () {

	# Get rootfs size
	if echo "${SDIMG_ROOTFS_TYPE}" | egrep -q "*\.xz"
	then
		ROOTPART_SIZE=`xz -l --robot ${SDIMG_ROOTFS} | grep "^file" | cut -f`
	else
		ROOTPART_SIZE=`du -Lb ${SDIMG_ROOTFS} | cut -f1`
	fi

	ROOTPART_SIZE=$(expr ${ROOTPART_SIZE} / 1024)

	# just in case our file system block size is not a multiple of 1KiB
	if [ $(expr ${ROOTPART_SIZE} % 1024) != 0 ];
	then
		ROOTPART_SIZE=$(expr ${ROOTPART_SIZE} + 1)
	fi

	# Align partitions
	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1)
	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE_ALIGNED} - ${BOOT_SPACE_ALIGNED} % ${IMAGE_ROOTFS_ALIGNMENT})
	SDIMG_SIZE=$(expr ${IMAGE_ROOTFS_ALIGNMENT} + ${BOOT_SPACE_ALIGNED} + $ROOTPART_SIZE)

	echo "Creating filesystem with Boot partition ${BOOT_SPACE_ALIGNED} KiB and RootFS $ROOTPART_SIZE KiB"

	# Check if we are building with device tree support
	DTS="${@get_dts(d, None)}"

	# Initialize sdcard image file
	dd if=/dev/zero of=${SDIMG} bs=1024 count=0 seek=${SDIMG_SIZE}

	# Create partition table
	parted -s ${SDIMG} mklabel msdos
	# Create boot partition and mark it as bootable
	parted -s ${SDIMG} unit KiB mkpart primary fat32 ${IMAGE_ROOTFS_ALIGNMENT} $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT})
	parted -s ${SDIMG} set 1 boot on
	# Create rootfs partition to the end of disk
	parted -s ${SDIMG} -- unit KiB mkpart primary ext2 $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT}) -1s
	parted ${SDIMG} print

	# Create a vfat image with boot files
	BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDIMG} unit b print | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 512 /2 }')
	rm -f ${WORKDIR}/boot.img
	mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS
	mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/bcm2835-bootfiles/* ::/
	case "${KERNEL_IMAGETYPE}" in
	"uImage")
		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/u-boot.img ::${SDIMG_KERNELIMAGE}
		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}${KERNEL_INITRAMFS}-${MACHINE}.bin ::uImage
		;;
	*)
		if test -n "${DTS}"; then
			# Device Tree Overlays are assumed to be suffixed by '-overlay.dtb' string and will be put in a dedicated folder
			DT_OVERLAYS="${@split_overlays(d, 0)}"
			DT_ROOT="${@split_overlays(d, 1)}"

			# Copy board device trees to root folder
			for DTB in ${DT_ROOT}; do
				DTB_BASE_NAME=`basename ${DTB} .dtb`

				mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTB_BASE_NAME}.dtb ::${DTB_BASE_NAME}.dtb
			done

			# Copy device tree overlays to dedicated folder
			mmd -i ${WORKDIR}/boot.img overlays
			for DTB in ${DT_OVERLAYS}; do
				DTB_EXT=${DTB##*.}
				DTB_BASE_NAME=`basename ${DTB} ."${DTB_EXT}"`

				mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTB_BASE_NAME}.${DTB_EXT} ::overlays/${DTB_BASE_NAME}.${DTB_EXT}
			done
		fi
		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}${KERNEL_INITRAMFS}-${MACHINE}.bin ::${SDIMG_KERNELIMAGE}
		;;
	esac

	if [ -n ${FATPAYLOAD} ] ; then
		echo "Copying payload into VFAT"
		for entry in ${FATPAYLOAD} ; do
				# add the || true to stop aborting on vfat issues like not supporting .~lock files
				mcopy -i ${WORKDIR}/boot.img -s -v ${IMAGE_ROOTFS}$entry :: || true
		done
	fi

	# Add stamp file
	echo "${IMAGE_NAME}-${IMAGEDATESTAMP}" > ${WORKDIR}/image-version-info
	mcopy -i ${WORKDIR}/boot.img -v ${WORKDIR}//image-version-info ::

	# Burn Partitions
	dd if=${WORKDIR}/boot.img of=${SDIMG} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
	# If SDIMG_ROOTFS_TYPE is a .xz file use xzcat
	if echo "${SDIMG_ROOTFS_TYPE}" | egrep -q "*\.xz"
	then
		xzcat ${SDIMG_ROOTFS} | dd of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
	else
		dd if=${SDIMG_ROOTFS} of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
	fi

	# Optionally apply compression
	case "${SDIMG_COMPRESSION}" in
	"gzip")
		gzip -k9 "${SDIMG}"
		;;
	"bzip2")
		bzip2 -k9 "${SDIMG}"
		;;
	"xz")
		xz -k "${SDIMG}"
		;;
	esac
}