# This is the sample jh7110_uEnv.txt file for starfive visionfive U-boot
# The current convention (SUBJECT TO CHANGE) is that this file
# will be loaded from the third partition on the
# MMC card.
#devnum=1
partnum=3

# The FIT file to boot from
fitfile=fitImage

# for debugging boot
bootargs_ext=if test ${devnum} = 0; then setenv bootargs "console=ttyS0,115200 rootwait root=/dev/mmcblk0p4"; else setenv bootargs "console=ttyS0,115200 rootwait root=/dev/mmcblk1p4"; fi;

# for addr info
fileaddr=0xa0000000
fdtaddr=0x46000000
# boot Linux flat or compressed 'Image' stored at 'kernel_addr_r'
kernel_addr_r=0x40200000

bootwait=setenv _delay ${bootdelay}; echo ${_delay}; while test ${_delay} > 0; do sleep 1; setexpr _delay ${_delay} - 1; echo ${_delay}; done

boot2=run bootargs_ext; mmc dev ${devnum}; fatload mmc ${devnum}:${partnum} ${fileaddr} ${fitfile}; bootm ${fileaddr}