# Commnet out below if want to use QtWebkit PACKAGECONFIG_remove_pn-qtquick1 = "webkit" # # This file is your local configuration file and is where all local user settings # are placed. The comments in this file give some guide to the options a new user # to the system might want to change but pretty much any configuration option can # be set in this file. More adventurous users can look at local.conf.extended # which contains other examples of configuration which can be placed in this file # but new users likely won't need any of them initially. # # Lines starting with the '#' character are commented out and in some cases the # default values are provided as comments to show people example syntax. Enabling # the option is a question of removing the # character and making any change to the # variable as required. # # Machine Selection # # You need to select a specific machine to target the build with. There are a selection # of emulated machines available which can boot and run in the QEMU emulator: # #MACHINE ?= "qemuarm" #MACHINE ?= "qemumips" #MACHINE ?= "qemuppc" #MACHINE ?= "qemux86" #MACHINE ?= "qemux86-64" # # There are also the following hardware board target machines included for # demonstration purposes: # #MACHINE ?= "beaglebone" #MACHINE ?= "genericx86" #MACHINE ?= "genericx86-64" #MACHINE ?= "mpc8315e-rdb" #MACHINE ?= "edgerouter" # # This sets the default machine to be qemux86 if no other machine is selected: MACHINE ??= "qemux86-64" # # Where to place downloads # # During a first build the system will download many different source code tarballs # from various upstream projects. This can take a while, particularly if your network # connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you # can preserve this directory to speed up this part of subsequent builds. This directory # is safe to share between multiple builds on the same machine too. # # The default is a downloads directory under TOPDIR which is the build directory. # #DL_DIR ?= "${TOPDIR}/downloads" # # Where to place shared-state files # # BitBake has the capability to accelerate builds based on previously built output. # This is done using "shared state" files which can be thought of as cache objects # and this option determines where those files are placed. # # You can wipe out TMPDIR leaving this directory intact and the build would regenerate # from these files if no changes were made to the configuration. If changes were made # to the configuration, only shared state files where the state was still valid would # be used (done using checksums). # # The default is a sstate-cache directory under TOPDIR. # #SSTATE_DIR ?= "${TOPDIR}/sstate-cache" # # Where to place the build output # # This option specifies where the bulk of the building work should be done and # where BitBake should place its temporary files and output. Keep in mind that # this includes the extraction and compilation of many applications and the toolchain # which can use Gigabytes of hard disk space. # # The default is a tmp directory under TOPDIR. # #TMPDIR = "${TOPDIR}/tmp" # # Default policy config # # The distribution setting controls which policy settings are used as defaults. # The default value is fine for general Yocto project use, at least initially. # Ultimately when creating custom policy, people will likely end up subclassing # these defaults. # #DISTRO ?= "poky" DISTRO ?= "poky-agl" # As an example of a subclass there is a "bleeding" edge policy configuration # where many versions are set to the absolute latest code from the upstream # source control systems. This is just mentioned here as an example, its not # useful to most new users. # DISTRO ?= "poky-bleeding" # # Package Management configuration # # This variable lists which packaging formats to enable. Multiple package backends # can be enabled at once and the first item listed in the variable will be used # to generate the root filesystems. # Options are: # - 'package_deb' for debian style deb files # - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) # - 'package_rpm' for rpm style packages # E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" # We default to rpm: PACKAGE_CLASSES ?= "package_rpm" # # SDK/ADT target architecture # # This variable specifies the architecture to build SDK/ADT items for and means # you can build the SDK packages for architectures other than the machine you are # running the build on (i.e. building i686 packages on an x86_64 host). # Supported values are i686 and x86_64 #SDKMACHINE ?= "i686" # # Extra image configuration defaults # # The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated # images. Some of these options are added to certain image types automatically. The # variable can contain the following options: # "dbg-pkgs" - add -dbg packages for all installed packages # (adds symbol information for debugging/profiling) # "dev-pkgs" - add -dev packages for all installed packages # (useful if you want to develop against libs in the image) # "ptest-pkgs" - add -ptest packages for all ptest-enabled packages # (useful if you want to run the package test suites) # "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) # "tools-debug" - add debugging tools (gdb, strace) # "eclipse-debug" - add Eclipse remote debugging support # "tools-profile" - add profiling tools (oprofile, exmap, lttng, valgrind) # "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) # "debug-tweaks" - make an image suitable for development #