add H3 Videobox board

1 files changed, 4140 insertions, 0 deletions

diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0042-arm64-dts-r8a7795-h3ulcb-vb-add-ADAS-board.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0042-arm64-dts-r8a7795-h3ulcb-vb-add-ADAS-board.patch
new file mode 100644
index 0000000..c2099f9
--- /dev/null
+++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0042-arm64-dts-r8a7795-h3ulcb-vb-add-ADAS-board.patch
@@ -0,0 +1,4140 @@
+From b7d0e4d918d57ed3c015558a11c3aa8487b7e729 Mon Sep 17 00:00:00 2001
+From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
+Date: Thu, 13 Jul 2017 06:17:32 +0300
+Subject: [PATCH] arm64: dts: r8a7795-h3ulcb-vb: add ADAS board
+
+Videobox board on R8A7795 SoC
+
+Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
+---
+ arch/arm64/boot/dts/renesas/Makefile               |    1 +
+ .../boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts     | 1787 ++++++++++++++++++++
+ arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts  | 1787 ++++++++++++++++++++
+ arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi      |  507 ++++++
+ 4 files changed, 4082 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts
+ create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts
+ create mode 100644 arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi
+
+diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
+index 86a08db..c9b3e96 100644
+--- a/arch/arm64/boot/dts/renesas/Makefile
++++ b/arch/arm64/boot/dts/renesas/Makefile
+@@ -16,6 +16,7 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x-view.dtb
+ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-view.dtb
+ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-had-alfa.dtb r8a7795-h3ulcb-had-beta.dtb
+ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb r8a7795-h3ulcb-kf-v1.dtb
++dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-vb.dtb r8a7795-es1-h3ulcb-vb.dtb
+ 
+ always		:= $(dtb-y)
+ clean-files	:= *.dtb
+diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts
+new file mode 100644
+index 0000000..77ad679
+--- /dev/null
++++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts
+@@ -0,0 +1,1787 @@
++/*
++ * Device Tree Source for the H3ULCB Videobox board on r8a7795 ES1.x
++ *
++ * Copyright (C) 2017 Renesas Electronics Corp.
++ * Copyright (C) 2017 Cogent Embedded, Inc.
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2.  This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++#include "r8a7795-es1-h3ulcb.dts"
++
++/ {
++	model = "Renesas H3ULCB Videobox board based on r8a7795";
++
++	leds {
++		compatible = "gpio-leds";
++
++		led5 {
++			gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
++		};
++		led6 {
++			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
++		};
++		/* D13 - status 0 */
++		led_ext00 {
++			gpios = <&gpio_ext_led 0 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "heartbeat";
++		};
++		/* D14 - status 1 */
++		led_ext01 {
++			gpios = <&gpio_ext_led 1 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "mmc1";
++		};
++		/* D16 - HDMI1 */
++		led_ext02 {
++			gpios = <&gpio_ext_led 2 GPIO_ACTIVE_LOW>;
++		};
++		/* D18 - HDMI0 */
++		led_ext03 {
++			gpios = <&gpio_ext_led 3 GPIO_ACTIVE_LOW>;
++		};
++		/* D20 - USB3.0 - 0.1 */
++		led_ext04 {
++			gpios = <&gpio_ext_led 4 GPIO_ACTIVE_LOW>;
++		};
++		/* D21 - USB3.0 - 0.2 */
++		led_ext05 {
++			gpios = <&gpio_ext_led 5 GPIO_ACTIVE_LOW>;
++		};
++		/* D24 - USB3.0 - 1.1 */
++		led6_ext06 {
++			gpios = <&gpio_ext_led 6 GPIO_ACTIVE_LOW>;
++		};
++		/* D25 - USB3.0 - 1.2 */
++		led_ext07 {
++			gpios = <&gpio_ext_led 7 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	snd_clk: snd_clk {
++		compatible = "fixed-clock";
++		#clock-cells = <0>;
++		clock-frequency = <24576000>;
++		clock-output-names = "scki";
++	};
++
++	vccq_sdhi3: regulator@5 {
++		compatible = "regulator-fixed";
++
++		regulator-name = "SDHI3 VccQ";
++		/* external voltage translator to 1.8V */
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++	};
++
++	fpdlink_switch: regulator@8 {
++		compatible = "regulator-fixed";
++		regulator-name = "fpdlink_on";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		gpio = <&gpio1 20 0>;
++		enable-active-high;
++		regulator-always-on;
++	};
++
++	hub_reset: regulator@9 {
++		compatible = "regulator-fixed";
++		regulator-name = "hub_reset";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		gpio = <&gpio5 5 0>;
++		enable-active-high;
++		regulator-always-on;
++	};
++
++	hub_power: regulator@10 {
++		compatible = "regulator-fixed";
++		regulator-name = "hub_power";
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		gpio = <&gpio6 28 0>;
++		enable-active-high;
++		regulator-always-on;
++	};
++
++	/delete-node/sound;
++
++	rsnd_ak4613: sound@0 {
++		pinctrl-0 = <&sound_0_pins>;
++		pinctrl-names = "default";
++		compatible = "simple-audio-card";
++
++		simple-audio-card,format = "left_j";
++		simple-audio-card,name = "ak4613";
++
++		simple-audio-card,bitclock-master = <&sndcpu>;
++		simple-audio-card,frame-master = <&sndcpu>;
++
++		sndcpu: simple-audio-card,cpu@1 {
++			sound-dai = <&rcar_sound>;
++		};
++
++		sndcodec: simple-audio-card,codec@1 {
++			sound-dai = <&ak4613>;
++		};
++	};
++
++	lvds-encoder {
++		compatible = "thine,thc63lvdm83d";
++
++		ports {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			port@0 {
++				reg = <0>;
++				lvds_enc_in: endpoint {
++					remote-endpoint = <&du_out_lvds0>;
++				};
++			};
++			port@1 {
++				reg = <1>;
++				lvds_enc_out: endpoint {
++					remote-endpoint = <&lvds_in>;
++				};
++			};
++		};
++	};
++
++	lvds {
++		compatible = "lvds-connector";
++
++		width-mm = <210>;
++		height-mm = <158>;
++
++		panel-timing {
++			/* 1280x800 @60Hz */
++			clock-frequency = <65000000>;
++			hactive = <1280>;
++			vactive = <800>;
++			hsync-len = <40>;
++			hfront-porch = <80>;
++			hback-porch = <40>;
++			vfront-porch = <14>;
++			vback-porch = <14>;
++			vsync-len = <4>;
++		};
++
++		port {
++			lvds_in: endpoint {
++				remote-endpoint = <&lvds_enc_out>;
++			};
++		};
++	};
++
++	hdmi1-out {
++		compatible = "hdmi-connector";
++		type = "a";
++
++		port {
++			hdmi1_con: endpoint {
++				remote-endpoint = <&rcar_dw_hdmi1_out>;
++			};
++		};
++	};
++
++	excan_ref_clk: excan-ref-clock {
++		compatible = "fixed-clock";
++		#clock-cells = <0>;
++		clock-frequency = <16000000>;
++	};
++
++	radio: si468x@0 {
++		compatible = "si,si468x-pcm";
++		status = "okay";
++
++		#sound-dai-cells = <0>;
++	};
++
++	spi_gpio_sw {
++		compatible = "spi-gpio";
++		#address-cells = <0x1>;
++		#size-cells = <0x0>;
++		gpio-sck = <&gpio0 8 GPIO_ACTIVE_HIGH>;
++		gpio-miso = <&gpio0 10 GPIO_ACTIVE_HIGH>;
++		gpio-mosi = <&gpio0 11 GPIO_ACTIVE_HIGH>;
++		cs-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
++		num-chipselects = <1>;
++
++		spidev: spidev@0 {
++			compatible = "spidev", "spi-gpio";
++			reg = <0>;
++			spi-max-frequency = <25000000>;
++			spi-cpha;
++			spi-cpol;
++		};
++	};
++
++	spi_gpio_can {
++		compatible = "spi-gpio";
++		#address-cells = <0x1>;
++		#size-cells = <0x0>;
++		gpio-sck = <&gpio1 2 GPIO_ACTIVE_HIGH>;
++		gpio-miso = <&gpio1 3 GPIO_ACTIVE_HIGH>;
++		gpio-mosi = <&gpio1 1 GPIO_ACTIVE_HIGH>;
++		cs-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
++			    &gpio1 4 GPIO_ACTIVE_HIGH>;
++		num-chipselects = <2>;
++
++		spican0: spidev@0 {
++			compatible = "microchip,mcp2515";
++			reg = <0>;
++			clocks = <&excan_ref_clk>;
++			interrupt-parent = <&gpio0>;
++			interrupts = <15 GPIO_ACTIVE_LOW>;
++			spi-max-frequency = <10000000>;
++		};
++		spican1: spidev@1 {
++			compatible = "microchip,mcp2515";
++			reg = <1>;
++			clocks = <&excan_ref_clk>;
++			interrupt-parent = <&gpio1>;
++			interrupts = <5 GPIO_ACTIVE_LOW>;
++			spi-max-frequency = <10000000>;
++		};
++	};
++};
++
++&du {
++	ports {
++		port@1 {
++			endpoint {
++				remote-endpoint = <&rcar_dw_hdmi0_in>;
++			};
++		};
++		port@2 {
++			endpoint {
++				remote-endpoint = <&rcar_dw_hdmi1_in>;
++			};
++		};
++		port@3 {
++			endpoint {
++				remote-endpoint = <&lvds_enc_in>;
++			};
++		};
++	};
++};
++
++&hdmi1 {
++	status = "okay";
++
++	ports {
++		#address-cells = <1>;
++		#size-cells = <0>;
++		port@0 {
++			reg = <0>;
++			rcar_dw_hdmi1_in: endpoint {
++				remote-endpoint = <&du_out_hdmi1>;
++			};
++		};
++		port@1 {
++			reg = <1>;
++			rcar_dw_hdmi1_out: endpoint {
++				remote-endpoint = <&hdmi1_con>;
++			};
++		};
++	};
++};
++
++&pfc {
++	hscif4_pins: hscif4 {
++		groups = "hscif4_data_a", "hscif4_ctrl";
++		function = "hscif4";
++	};
++
++	sdhi3_pins_3v3: sd3_3v3 {
++		groups = "sdhi3_data4", "sdhi3_ctrl";
++		function = "sdhi3";
++		power-source = <3300>;
++	};
++
++	/delete-node/sound;
++
++	sound_0_pins: sound1 {
++		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
++		function = "ssi";
++	};
++
++	usb0_pins: usb0 {
++		groups = "usb0";
++		function = "usb0";
++	};
++
++	can0_pins: can0 {
++		groups = "can0_data_a";
++		function = "can0";
++	};
++
++	can1_pins: can1 {
++		groups = "can1_data";
++		function = "can1";
++	};
++
++	canfd0_pins: canfd0 {
++		groups = "canfd0_data_a";
++		function = "canfd0";
++	};
++
++	canfd1_pins: canfd1 {
++		groups = "canfd1_data";
++		function = "canfd1";
++	};
++};
++
++&gpio0 {
++	video_a_irq {
++		gpio-hog;
++		gpios = <12 GPIO_ACTIVE_HIGH>;
++		input;
++		line-name = "Video-A irq";
++	};
++
++	video_b_irq {
++		gpio-hog;
++		gpios = <13 GPIO_ACTIVE_HIGH>;
++		input;
++		line-name = "Video-B irq";
++	};
++
++	video_c_irq {
++		gpio-hog;
++		gpios = <14 GPIO_ACTIVE_HIGH>;
++		input;
++		line-name = "Video-C irq";
++	};
++};
++
++&gpio1 {
++	gpioext_4_22_irq {
++		gpio-hog;
++		gpios = <25 GPIO_ACTIVE_HIGH>;
++		input;
++		line-name = "0x22@i2c4 irq";
++	};
++	pcie_disable {
++		gpio-hog;
++		gpios = <11 GPIO_ACTIVE_HIGH>;
++		output-high;
++		line-name = "mPCIe W_DISABLE";
++	};
++	m2_sleep {
++		gpio-hog;
++		gpios = <6 GPIO_ACTIVE_HIGH>;
++		output-high;
++		line-name = "M.2 SLEEP#";
++	};
++	m2_pres {
++		gpio-hog;
++		gpios = <7 GPIO_ACTIVE_HIGH>;
++		input;
++		line-name = "M.2 Present";
++	};
++	m2_pcie_det {
++		gpio-hog;
++		gpios = <18 GPIO_ACTIVE_HIGH>;
++		input;
++		line-name = "M.2 PCIe detected";
++	};
++	m2_usb_det {
++		gpio-hog;
++		gpios = <19 GPIO_ACTIVE_HIGH>;
++		input;
++		line-name = "M.2 USB30 detected";
++	};
++	m2_usb_det {
++		gpio-hog;
++		gpios = <27 GPIO_ACTIVE_HIGH>;
++		input;
++		line-name = "M.2 SSD detected";
++	};
++	eth_phy_reset {
++		gpio-hog;
++		gpios = <16 GPIO_ACTIVE_HIGH>;
++		output-high;
++		line-name = "BR phy reset";
++	};
++	eth_sw_reset {
++		gpio-hog;
++		gpios = <17 GPIO_ACTIVE_HIGH>;
++		output-high;
++		line-name = "BR switch reset";
++	};
++};
++
++&gpio2 {
++	m2_wake {
++		gpio-hog;
++		gpios = <1 GPIO_ACTIVE_HIGH>;
++		input;
++		line-name = "M.2 WAKE#";
++	};
++	m2_pcie_en {
++		gpio-hog;
++		gpios = <4 GPIO_ACTIVE_HIGH>;
++		output-high;
++		line-name = "M.2 PCIe enable";
++	};
++};
++
++&gpio3 {
++	m2_power_off {
++		gpio-hog;
++		gpios = <15 GPIO_ACTIVE_HIGH>;
++		output-high;
++		line-name = "M.2 FULL_CARD_POWER_OFF#";
++	};
++};
++
++&gpio6 {
++	pcie_wake {
++		gpio-hog;
++		gpios = <4 GPIO_ACTIVE_HIGH>;
++		input;
++		line-name = "mPCIe WAKE#";
++	};
++	pcie_clkreq {
++		gpio-hog;
++		gpios = <10 GPIO_ACTIVE_HIGH>;
++		input;
++		line-name = "mPCIe CLKREQ#";
++	};
++	m2_rst {
++		gpio-hog;
++		gpios = <21 GPIO_ACTIVE_HIGH>;
++		output-high;
++		line-name = "M.2 RESET#";
++	};
++};
++
++&hscif4 {
++	pinctrl-0 = <&hscif4_pins>;
++	pinctrl-names = "default";
++	ctsrts;
++
++	status = "okay";
++};
++
++&i2c2 {
++	clock-frequency = <400000>;
++
++	i2cswitch2: pca9548@74 {
++		compatible = "nxp,pca9548";
++		#address-cells = <1>;
++		#size-cells = <0>;
++		reg = <0x74>;
++		reset-gpios = <&gpio6 5 GPIO_ACTIVE_LOW>;
++
++		i2c@0 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <0>;
++			/* USB3.0 HUB node(s) */
++		};
++
++		i2c@6 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <6>;
++			/* PCIe node(s) */
++		};
++
++		i2c@7 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <7>;
++			/* Slot A (CN10) */
++
++			ov106xx@0 {
++				compatible = "ovti,ov106xx";
++				reg = <0x60>;
++
++				port@0 {
++					ov106xx_in0: endpoint {
++						clock-lanes = <0>;
++						data-lanes = <1 2 3 4>;
++						remote-endpoint = <&vin0ep0>;
++					};
++				};
++				port@1 {
++					ov106xx_max9286_des0ep0: endpoint@0 {
++						remote-endpoint = <&max9286_des0ep0>;
++					};
++					ov106xx_ti964_des0ep0: endpoint@1 {
++						remote-endpoint = <&ti964_des0ep0>;
++					};
++					ov106xx_ti954_des0ep0: endpoint@2 {
++						remote-endpoint = <&ti954_des0ep0>;
++					};
++				};
++			};
++
++			ov106xx@1 {
++				compatible = "ovti,ov106xx";
++				reg = <0x61>;
++
++				port@0 {
++					ov106xx_in1: endpoint {
++						clock-lanes = <0>;
++						data-lanes = <1 2 3 4>;
++						remote-endpoint = <&vin1ep0>;
++					};
++				};
++				port@1 {
++					ov106xx_max9286_des0ep1: endpoint@0 {
++						remote-endpoint = <&max9286_des0ep1>;
++					};
++					ov106xx_ti964_des0ep1: endpoint@1 {
++						remote-endpoint = <&ti964_des0ep1>;
++					};
++					ov106xx_ti954_des0ep1: endpoint@2 {
++						remote-endpoint = <&ti954_des0ep1>;
++					};
++				};
++			};
++
++			ov106xx@2 {
++				compatible = "ovti,ov106xx";
++				reg = <0x62>;
++
++				port@0 {
++					ov106xx_in2: endpoint {
++						clock-lanes = <0>;
++						data-lanes = <1 2 3 4>;
++						remote-endpoint = <&vin2ep0>;
++					};
++				};
++				port@1 {
++					ov106xx_max9286_des0ep2: endpoint@0 {
++						remote-endpoint = <&max9286_des0ep2>;
++					};
++					ov106xx_ti964_des0ep2: endpoint@1 {
++						remote-endpoint = <&ti964_des0ep2>;
++					};
++				};
++			};
++
++			ov106xx@3 {
++				compatible = "ovti,ov106xx";
++				reg = <0x63>;
++
++				port@0 {
++					ov106xx_in3: endpoint {
++						clock-lanes = <0>;
++						data-lanes = <1 2 3 4>;
++						remote-endpoint = <&vin3ep0>;
++					};
++				};
++				port@1 {
++					ov106xx_max9286_des0ep3: endpoint@0 {
++						remote-endpoint = <&max9286_des0ep3>;
++					};
++					ov106xx_ti964_des0ep3: endpoint@1 {
++						remote-endpoint = <&ti964_des0ep3>;
++					};
++				};
++			};
++
++			/* DS90UB964 @ 0x3a */
++			ti964-ti9x3@0 {
++				compatible = "ti,ti964-ti9x3";
++				reg = <0x3a>;
++				ti,sensor_delay = <350>;
++				ti,links = <4>;
++				ti,lanes = <4>;
++				ti,forwarding-mode = "round-robin";
++				ti,cable-mode = "stp";
++
++				port@0 {
++					ti964_des0ep0: endpoint@0 {
++						ti9x3-addr = <0x0c>;
++						dvp-order = <0>;
++						remote-endpoint = <&ov106xx_in0>;
++					};
++					ti964_des0ep1: endpoint@1 {
++						ti9x3-addr = <0x0d>;
++						dvp-order = <0>;
++						remote-endpoint = <&ov106xx_in1>;
++					};
++					ti964_des0ep2: endpoint@2 {
++						ti9x3-addr = <0x0e>;
++						dvp-order = <0>;
++						remote-endpoint = <&ov106xx_in2>;
++					};
++					ti964_des0ep3: endpoint@3 {
++						ti9x3-addr = <0x0f>;
++						dvp-order = <0>;
++						remote-endpoint = <&ov106xx_in3>;
++					};
++				};
++				port@1 {
++					ti964_csi0ep0: endpoint {
++						csi-rate = <1450>;
++						remote-endpoint = <&csi2_40_ep>;
++					};
++				};
++			};
++
++			/* DS90UB954 @ 0x38 */
++			ti954-ti9x3@0 {
++				compatible = "ti,ti954-ti9x3";
++				reg = <0x38>;
++				/* gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; */
++				ti,sensor_delay = <350>;
++				ti,links = <2>;
++				ti,lanes = <4>;
++				ti,forwarding-mode = "round-robin";
++				ti,cable-mode = "stp";
++
++				port@0 {
++					ti954_des0ep0: endpoint@0 {
++						ti9x3-addr = <0x0c>;
++						dvp-order = <0>;
++						remote-endpoint = <&ov106xx_in0>;
++					};
++					ti954_des0ep1: endpoint@1 {
++						ti9x3-addr = <0x0d>;
++						dvp-order = <0>;
++						remote-endpoint = <&ov106xx_in1>;
++					};
++				};
++				port@1 {
++					ti954_csi0ep0: endpoint {
++						csi-rate = <1450>;
++						remote-endpoint = <&csi2_40_ep>;
++					};
++				};
++			};
++
++			/* MAX9286 @ 0x2c */
++			max9286-max9271@0 {
++				compatible = "maxim,max9286-max9271";
++				reg = <0x2c>;
++				maxim,sensor_delay = <350>;
++				maxim,links = <4>;
++				maxim,lanes = <4>;
++				maxim,resetb-gpio = <1>;
++				maxim,fsync-mode = "automatic";
++				maxim,timeout = <100>;
++
++				port@0 {
++					max9286_des0ep0: endpoint@0 {
++						max9271-addr = <0x50>;
++						dvp-order = <1>;
++						remote-endpoint = <&ov106xx_in0>;
++					};
++					max9286_des0ep1: endpoint@1 {
++						max9271-addr = <0x51>;
++						dvp-order = <1>;
++						remote-endpoint = <&ov106xx_in1>;
++					};
++					max9286_des0ep2: endpoint@2 {
++						max9271-addr = <0x52>;
++						dvp-order = <1>;
++						remote-endpoint = <&ov106xx_in2>;
++					};
++					max9286_des0ep3: endpoint@3 {
++						max9271-addr = <0x53>;
++						dvp-order = <1>;
++						remote-endpoint = <&ov106xx_in3>;
++					};
++				};
++				port@1 {
++					max9286_csi0ep0: endpoint {
++						csi-rate = <700>;
++						remote-endpoint = <&csi2_40_ep>;
++					};
++				};
++			};
++		};
++
++		i2c@2 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <2>;
++			/* Slot B (CN11) */
++
++			ov106xx@4 {
++				compatible = "ovti,ov106xx";
++				reg = <0x64>;
++
++				port@0 {
++					ov106xx_in4: endpoint {
++						clock-lanes = <0>;
++						data-lanes = <1 2 3 4>;
++						remote-endpoint = <&vin4ep0>;
++					};
++				};
++				port@1 {
++					ov106xx_max9286_des1ep0: endpoint@0 {
++						remote-endpoint = <&max9286_des1ep0>;
++					};
++					ov106xx_ti964_des1ep0: endpoint@1 {
++						remote-endpoint = <&ti964_des1ep0>;
++					};
++					ov106xx_ti954_des1ep0: endpoint@2 {
++						remote-endpoint = <&ti954_des1ep0>;
++					};
++				};
++			};
++
++			ov106xx@5 {
++				compatible = "ovti,ov106xx";
++				reg = <0x65>;
++
++				port@0 {
++					ov106xx_in5: endpoint {
++						clock-lanes = <0>;
++						data-lanes = <1 2 3 4>;
++						remote-endpoint = <&vin5ep0>;
++					};
++				};
++				port@1 {
++					ov106xx_max9286_des1ep1: endpoint@0 {
++						remote-endpoint = <&max9286_des1ep1>;
++					};
++					ov106xx_ti964_des1ep1: endpoint@1 {
++						remote-endpoint = <&ti964_des1ep1>;
++					};
++					ov106xx_ti954_des1ep1: endpoint@2 {
++						remote-endpoint = <&ti954_des1ep1>;
++					};
++				};
++			};
++
++			ov106xx@6 {
++				compatible = "ovti,ov106xx";
++				reg = <0x66>;
++
++				port@0 {
++					ov106xx_in6: endpoint {
++						clock-lanes = <0>;
++						data-lanes = <1 2 3 4>;
++						remote-endpoint = <&vin6ep0>;
++					};
++				};
++				port@1 {
++					ov106xx_max9286_des1ep2: endpoint@0 {
++						remote-endpoint = <&max9286_des1ep2>;
++					};
++					ov106xx_ti964_des1ep2: endpoint@1 {
++						remote-endpoint = <&ti964_des1ep2>;
++					};
++				};
++			};
++
++			ov106xx@7 {
++				compatible = "ovti,ov106xx";
++				reg = <0x67>;
++
++				port@0 {
++					ov106xx_in7: endpoint {
++						clock-lanes = <0>;
++						data-lanes = <1 2 3 4>;
++						remote-endpoint = <&vin7ep0>;
++					};
++				};
++				port@1 {
++					ov106xx_max9286_des1ep3: endpoint@0 {
++						remote-endpoint = <&max9286_des1ep3>;
++					};
++					ov106xx_ti964_des1ep3: endpoint@1 {
++						remote-endpoint = <&ti964_des1ep3>;
++					};
++				};
++			};
++
++			/* DS90UB964 @ 0x3a */
++			ti964-ti9x3@1 {
++				compatible = "ti,ti964-ti9x3";
++				reg = <0x3a>;
++				ti,sensor_delay = <350>;
++				ti,links = <4>;
++				ti,lanes = <4>;
++				ti,forwarding-mode = "round-robin";
++				ti,cable-mode = "stp";
++
++				port@0 {
++					ti964_des1ep0: endpoint@0 {
++						ti9x3-addr = <0x0c>;
++						dvp-order = <0>;
++						remote-endpoint = <&ov106xx_in4>;
++					};
++					ti964_des1ep1: endpoint@1 {
++						ti9x3-addr = <0x0d>;
++						dvp-order = <0>;
++						remote-endpoint = <&ov106xx_in5>;
++					};
++					ti964_des1ep2: endpoint@2 {
++						ti9x3-addr = <0x0e>;
++						dvp-order = <0>;
++						remote-endpoint = <&ov106xx_in6>;
++					};
++					ti964_des1ep3: endpoint@3 {
++						ti9x3-addr = <0x0f>;
++						dvp-order = <0>;
++						remote-endpoint = <&ov106xx_in7>;
++					};
++				};
++				port@1 {
++					ti964_csi2ep0: endpoint {
++						csi-rate = <1450>;
++						remote-endpoint = <&csi2_41_ep>;
++					};
++				};
++			};
++
++			/* DS90UB954 @ 0x38 */
++			ti954-ti9x3@1 {
++				compatible = "ti,ti954-ti9x3";
++				reg = <0x38>;
++				/* gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>; */
++				ti,sensor_delay = <350>;
++				ti,links = <2>;
++				ti,lanes = <4>;
++				ti,forwarding-mode = "round-robin";
++				ti,cable-mode = "stp";
++
++				port@0 {
++					ti954_des1ep0: endpoint@0 {
++						ti9x3-addr = <0x0c>;
++						dvp-order = <0>;
++						remote-endpoint = <&ov106xx_in4>;
++					};
++					ti954_des1ep1: endpoint@1 {
++						ti9x3-addr = <0x0d>;
++						dvp-order = <0>;
++						remote-endpoint = <&ov106xx_in5>;
++					};
++				};
++				port@1 {
++					ti954_csi2ep0: endpoint {
++						csi-rate = <1450>;
++						remote-endpoint = <&csi2_41_ep>;
++					};
++				};
++			};
++
++			/* MAX9286 @ 0x2c */
++			max9286-max9271@1 {
++				compatible = "maxim,max9286-max9271";
++				reg = <0x2c>;
++				maxim,sensor_delay = <350>;
++				maxim,links = <4>;
++				maxim,lanes = <4>;
++				maxim,resetb-gpio = <1>;
++				maxim,fsync-mode = "automatic";
++				maxim,timeout = <100>;
++
++				port@0 {
++					max9286_des1ep0: endpoint@0 {
++						max9271-addr = <0x50>;
++						dvp-order = <1>;
++						remote-endpoint = <&ov106xx_in4>;
++					};
++					max9286_des1ep1: endpoint@1 {
++						max9271-addr = <0x51>;
++						dvp-order = <1>;
++						remote-endpoint = <&ov106xx_in5>;
++					};
++					max9286_des1ep2: endpoint@2 {
++						max9271-addr = <0x52>;
++						dvp-order = <1>;
++						remote-endpoint = <&ov106xx_in6>;
++					};
++					max9286_des1ep3: endpoint@3 {
++						max9271-addr = <0x53>;
++						dvp-order = <1>;
++						remote-endpoint = <&ov106xx_in7>;
++					};
++				};
++				port@1 {
++					max9286_csi2ep0: endpoint {
++						csi-rate = <700>;
++						remote-endpoint = <&csi2_41_ep>;
++					};
++				};
++			};
++		};
++
++		i2c@3 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <3>;
++			/* Slot C (CN12) */
++		};
++
++		i2c@1 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <1>;
++			/* Slot A (CN10) */
++
++			video_a_ext0: pca9535@26 {
++				compatible = "nxp,pca9535";
++				reg = <0x26>;
++				gpio-controller;
++				#gpio-cells = <2>;
++
++				video_a_des_cfg1 {
++					gpio-hog;
++					gpios = <5 GPIO_ACTIVE_HIGH>;
++					input;
++					line-name = "Video-A cfg1";
++				};
++				video_a_des_cfg0 {
++					gpio-hog;
++					gpios = <6 GPIO_ACTIVE_HIGH>;
++					input;
++					line-name = "Video-A cfg0";
++				};
++				video_a_pwr_shdn {
++					gpio-hog;
++					gpios = <3 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-A PWR_SHDN";
++				};
++				video_a_cam_pwr0 {
++					gpio-hog;
++					gpios = <12 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-A PWR0";
++				};
++				video_a_cam_pwr1 {
++					gpio-hog;
++					gpios = <13 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-A PWR1";
++				};
++				video_a_cam_pwr2 {
++					gpio-hog;
++					gpios = <14 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-A PWR2";
++				};
++				video_a_cam_pwr3 {
++					gpio-hog;
++					gpios = <15 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-A PWR3";
++				};
++				video_a_des_shdn {
++					gpio-hog;
++					gpios = <4 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-A DES_SHDN";
++				};
++				video_a_des_led {
++					gpio-hog;
++					gpios = <7 GPIO_ACTIVE_HIGH>;
++					output-low;
++					line-name = "Video-A led";
++				};
++			};
++
++			video_a_ext1: max7325@5c {
++				compatible = "maxim,max7325";
++				reg = <0x5c>;
++				gpio-controller;
++				#gpio-cells = <2>;
++
++				video_a_des_cfg2 {
++					gpio-hog;
++					gpios = <4 GPIO_ACTIVE_HIGH>;
++					input;
++					line-name = "Video-A cfg2";
++				};
++				video_a_des_cfg1 {
++					gpio-hog;
++					gpios = <6 GPIO_ACTIVE_HIGH>;
++					input;
++					line-name = "Video-A cfg1";
++				};
++				video_a_des_cfg0 {
++					gpio-hog;
++					gpios = <7 GPIO_ACTIVE_HIGH>;
++					input;
++					line-name = "Video-A cfg0";
++				};
++				video_a_pwr_shdn {
++					gpio-hog;
++					gpios = <14 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-A PWR_SHDN";
++				};
++				video_a_cam_pwr0 {
++					gpio-hog;
++					gpios = <8 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-A PWR0";
++				};
++				video_a_cam_pwr1 {
++					gpio-hog;
++					gpios = <9 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-A PWR1";
++				};
++				video_a_cam_pwr2 {
++					gpio-hog;
++					gpios = <10 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-A PWR2";
++				};
++				video_a_cam_pwr3 {
++					gpio-hog;
++					gpios = <11 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-A PWR3";
++				};
++				video_a_des_shdn {
++					gpio-hog;
++					gpios = <13 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-A DES_SHDN";
++				};
++				video_a_led {
++					gpio-hog;
++					gpios = <12 GPIO_ACTIVE_HIGH>;
++					output-low;
++					line-name = "Video-A LED";
++				};
++			};
++		};
++
++		i2c@5 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <5>;
++			/* Slot B (CN11) */
++
++			video_b_ext0: pca9535@26 {
++				compatible = "nxp,pca9535";
++				reg = <0x26>;
++				gpio-controller;
++				#gpio-cells = <2>;
++
++				video_b_des_cfg1 {
++					gpio-hog;
++					gpios = <5 GPIO_ACTIVE_HIGH>;
++					input;
++					line-name = "Video-B cfg1";
++				};
++				video_b_des_cfg0 {
++					gpio-hog;
++					gpios = <6 GPIO_ACTIVE_HIGH>;
++					input;
++					line-name = "Video-B cfg0";
++				};
++				video_b_pwr_shdn {
++					gpio-hog;
++					gpios = <3 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-B PWR_SHDN";
++				};
++				video_b_cam_pwr0 {
++					gpio-hog;
++					gpios = <12 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-B PWR0";
++				};
++				video_b_cam_pwr1 {
++					gpio-hog;
++					gpios = <13 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-B PWR1";
++				};
++				video_b_cam_pwr2 {
++					gpio-hog;
++					gpios = <14 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-B PWR2";
++				};
++				video_b_cam_pwr3 {
++					gpio-hog;
++					gpios = <15 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-B PWR3";
++				};
++				video_b_des_shdn {
++					gpio-hog;
++					gpios = <4 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-B DES_SHDN";
++				};
++				video_b_des_led {
++					gpio-hog;
++					gpios = <7 GPIO_ACTIVE_HIGH>;
++					output-low;
++					line-name = "Video-B led";
++				};
++			};
++
++			video_b_ext1: max7325@5c {
++				compatible = "maxim,max7325";
++				reg = <0x5c>;
++				gpio-controller;
++				#gpio-cells = <2>;
++
++				video_b_des_cfg2 {
++					gpio-hog;
++					gpios = <4 GPIO_ACTIVE_HIGH>;
++					input;
++					line-name = "Video-B cfg2";
++				};
++				video_b_des_cfg1 {
++					gpio-hog;
++					gpios = <6 GPIO_ACTIVE_HIGH>;
++					input;
++					line-name = "Video-B cfg1";
++				};
++				video_b_des_cfg0 {
++					gpio-hog;
++					gpios = <7 GPIO_ACTIVE_HIGH>;
++					input;
++					line-name = "Video-B cfg0";
++				};
++				video_b_pwr_shdn {
++					gpio-hog;
++					gpios = <14 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-B PWR_SHDN";
++				};
++				video_b_cam_pwr0 {
++					gpio-hog;
++					gpios = <8 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-B PWR0";
++				};
++				video_b_cam_pwr1 {
++					gpio-hog;
++					gpios = <9 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-B PWR1";
++				};
++				video_b_cam_pwr2 {
++					gpio-hog;
++					gpios = <10 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-B PWR2";
++				};
++				video_b_cam_pwr3 {
++					gpio-hog;
++					gpios = <11 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-B PWR3";
++				};
++				video_b_des_shdn {
++					gpio-hog;
++					gpios = <13 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-B DES_SHDN";
++				};
++				video_b_led {
++					gpio-hog;
++					gpios = <12 GPIO_ACTIVE_HIGH>;
++					output-low;
++					line-name = "Video-B LED";
++				};
++			};
++		};
++
++		i2c@4 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <4>;
++			/* Slot C (CN12) */
++		};
++	};
++};
++
++&i2c4 {
++	i2cswitch4: pca9548@74 {
++		compatible = "nxp,pca9548";
++		#address-cells = <1>;
++		#size-cells = <0>;
++		reg = <0x74>;
++		reset-gpios= <&gpio5 15 GPIO_ACTIVE_LOW>;
++
++		i2c@0 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <0>;
++			/* FAN node - EMC2103 */
++			fan_ctrl:ecm2103@2e {
++				compatible = "emc2103";
++				reg = <0x2e>;
++			};
++		};
++
++		i2c@1 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <1>;
++			/* Power nodes - 2 x TPS544x20 */
++		};
++
++		i2c@2 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <2>;
++			/* CAN and power board nodes */
++
++			gpio_ext_pwr: pca9535@22 {
++				compatible = "nxp,pca9535";
++				reg = <0x22>;
++				gpio-controller;
++				#gpio-cells = <2>;
++				interrupt-controller;
++				interrupt-parent = <&gpio1>;
++				interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
++
++				/* enable input DCDC after wake-up signal released */
++				pwr_hold {
++					gpio-hog;
++					gpios = <11 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "pwr_hold";
++				};
++
++				/* CAN0 */
++				can0_stby {
++					gpio-hog;
++					gpios = <4 GPIO_ACTIVE_HIGH>;
++					output-low;
++					line-name = "can0_stby";
++				};
++				can0_load {
++					gpio-hog;
++					gpios = <0 GPIO_ACTIVE_HIGH>;
++					output-low;
++					line-name = "can0_120R_load";
++				};
++				/* CAN1 */
++				can1_stby {
++					gpio-hog;
++					gpios = <5 GPIO_ACTIVE_HIGH>;
++					output-low;
++					line-name = "can1_stby";
++				};
++				can1_load {
++					gpio-hog;
++					gpios = <1 GPIO_ACTIVE_HIGH>;
++					output-low;
++					line-name = "can1_120R_load";
++				};
++				/* CAN2 */
++				can2_stby {
++					gpio-hog;
++					gpios = <6 GPIO_ACTIVE_HIGH>;
++					output-low;
++					line-name = "can2_stby";
++				};
++				can2_load {
++					gpio-hog;
++					gpios = <2 GPIO_ACTIVE_HIGH>;
++					output-low;
++					line-name = "can2_120R_load";
++				};
++				can2_rst {
++					gpio-hog;
++					gpios = <8 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "can2_rst";
++				};
++				/* CAN3 */
++				can3_stby {
++					gpio-hog;
++					gpios = <7 GPIO_ACTIVE_HIGH>;
++					output-low;
++					line-name = "can3_stby";
++				};
++				can3_load {
++					gpio-hog;
++					gpios = <3 GPIO_ACTIVE_HIGH>;
++					output-low;
++					line-name = "can3_120R_load";
++				};
++				can3_rst {
++					gpio-hog;
++					gpios = <9 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "can3_rst";
++				};
++			};
++		};
++
++		i2c@3 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <3>;
++			/* FPDLink output node - DS90UH947 */
++		};
++
++		i2c@4 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <4>;
++			/* BCM switch node */
++		};
++
++		i2c@5 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <5>;
++			/* LED board node(s) */
++
++			gpio_ext_led: pca9535@22 {
++				compatible = "nxp,pca9535";
++				reg = <0x22>;
++				gpio-controller;
++				#gpio-cells = <2>;
++
++				/* gpios 0..7 are used for indication LEDs, low-active */
++			};
++		};
++
++		i2c@6 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <6>;
++			/* M2 connector i2c node(s) */
++		};
++
++		/* port 7 is not used */
++	};
++};
++
++&pcie_bus_clk {
++	clock-frequency = <100000000>;
++	status = "okay";
++};
++
++&pciec0 {
++	status = "okay";
++};
++
++&pciec1 {
++	status = "okay";
++};
++
++&vin0 {
++	status = "okay";
++
++	ports {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		port@0 {
++			vin0ep0: endpoint {
++				csi,select = "csi40";
++				virtual,channel = <0>;
++				data-lanes = <1 2 3 4>;
++				remote-endpoint = <&ov106xx_in0>;
++			};
++		};
++		port@1 {
++			csi0ep0: endpoint {
++				remote-endpoint = <&csi2_40_ep>;
++			};
++		};
++		port@2 {
++			vin0_max9286_des0ep0: endpoint@0 {
++				remote-endpoint = <&max9286_des0ep0>;
++			};
++			vin0_ti964_des0ep0: endpoint@1 {
++				remote-endpoint = <&ti964_des0ep0>;
++			};
++			vin0_ti954_des0ep0: endpoint@2 {
++				remote-endpoint = <&ti954_des0ep0>;
++			};
++		};
++	};
++};
++
++&vin1 {
++	status = "okay";
++
++	ports {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		port@0 {
++			vin1ep0: endpoint {
++				csi,select = "csi40";
++				virtual,channel = <1>;
++				data-lanes = <1 2 3 4>;
++				remote-endpoint = <&ov106xx_in1>;
++			};
++		};
++		port@1 {
++			csi0ep1: endpoint {
++				remote-endpoint = <&csi2_40_ep>;
++			};
++		};
++		port@2 {
++			vin1_max9286_des0ep1: endpoint@0 {
++				remote-endpoint = <&max9286_des0ep1>;
++			};
++			vin1_ti964_des0ep1: endpoint@1 {
++				remote-endpoint = <&ti964_des0ep1>;
++			};
++			vin1_ti954_des0ep1: endpoint@2 {
++				remote-endpoint = <&ti954_des0ep1>;
++			};
++		};
++	};
++};
++
++&vin2 {
++	status = "okay";
++
++	ports {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		port@0 {
++			vin2ep0: endpoint {
++				csi,select = "csi40";
++				virtual,channel = <2>;
++				data-lanes = <1 2 3 4>;
++				remote-endpoint = <&ov106xx_in2>;
++			};
++		};
++		port@1 {
++			csi0ep2: endpoint {
++				remote-endpoint = <&csi2_40_ep>;
++			};
++		};
++		port@2 {
++			vin2_max9286_des0ep2: endpoint@0 {
++				remote-endpoint = <&max9286_des0ep2>;
++			};
++			vin2_ti964_des0ep2: endpoint@1 {
++				remote-endpoint = <&ti964_des0ep2>;
++			};
++		};
++	};
++};
++
++&vin3 {
++	status = "okay";
++
++	ports {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		port@0 {
++			vin3ep0: endpoint {
++				csi,select = "csi40";
++				virtual,channel = <3>;
++				data-lanes = <1 2 3 4>;
++				remote-endpoint = <&ov106xx_in3>;
++			};
++		};
++		port@1 {
++			csi0ep3: endpoint {
++				remote-endpoint = <&csi2_40_ep>;
++			};
++		};
++		port@2 {
++			vin3_max9286_des0ep3: endpoint@0 {
++				remote-endpoint = <&max9286_des0ep3>;
++			};
++			vin3_ti964_des0ep3: endpoint@1 {
++				remote-endpoint = <&ti964_des0ep3>;
++			};
++		};
++	};
++};
++
++&vin4 {
++	status = "okay";
++
++	ports {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		port@0 {
++			vin4ep0: endpoint {
++				csi,select = "csi41";
++				virtual,channel = <0>;
++				remote-endpoint = <&ov106xx_in4>;
++				data-lanes = <1 2 3 4>;
++			};
++		};
++		port@1 {
++			csi2ep0: endpoint {
++				remote-endpoint = <&csi2_41_ep>;
++			};
++		};
++		port@2 {
++			vin4_max9286_des1ep0: endpoint@0 {
++				remote-endpoint = <&max9286_des1ep0>;
++			};
++			vin4_ti964_des1ep0: endpoint@1 {
++				remote-endpoint = <&ti964_des1ep0>;
++			};
++			vin4_ti954_des1ep0: endpoint@2 {
++				remote-endpoint = <&ti954_des1ep0>;
++			};
++		};
++	};
++};
++
++&vin5 {
++	status = "okay";
++
++	ports {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		port@0 {
++			vin5ep0: endpoint@0 {
++				csi,select = "csi41";
++				virtual,channel = <1>;
++				remote-endpoint = <&ov106xx_in5>;
++				data-lanes = <1 2 3 4>;
++			};
++		};
++		port@1 {
++			csi2ep1: endpoint {
++				remote-endpoint = <&csi2_41_ep>;
++			};
++		};
++		port@2 {
++			vin5_max9286_des1ep1: endpoint@0 {
++				remote-endpoint = <&max9286_des1ep1>;
++			};
++			vin5_ti964_des1ep1: endpoint@1 {
++				remote-endpoint = <&ti964_des1ep1>;
++			};
++			vin5_ti954_des1ep1: endpoint@2 {
++				remote-endpoint = <&ti954_des1ep1>;
++			};
++		};
++	};
++};
++
++&vin6 {
++	status = "okay";
++
++	ports {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		port@0 {
++			vin6ep0: endpoint@0 {
++				csi,select = "csi41";
++				virtual,channel = <2>;
++				remote-endpoint = <&ov106xx_in6>;
++				data-lanes = <1 2 3 4>;
++			};
++		};
++		port@1 {
++			csi2ep2: endpoint {
++				remote-endpoint = <&csi2_41_ep>;
++			};
++		};
++		port@2 {
++			vin6_max9286_des1ep2: endpoint@0 {
++				remote-endpoint = <&max9286_des1ep2>;
++			};
++			vin6_ti964_des1ep2: endpoint@1 {
++				remote-endpoint = <&ti964_des1ep2>;
++			};
++		};
++	};
++};
++
++&vin7 {
++	status = "okay";
++
++	ports {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		port@0 {
++			vin7ep0: endpoint@0 {
++				csi,select = "csi41";
++				virtual,channel = <3>;
++				remote-endpoint = <&ov106xx_in7>;
++				data-lanes = <1 2 3 4>;
++			};
++		};
++		port@1 {
++			csi2ep3: endpoint {
++				remote-endpoint = <&csi2_41_ep>;
++			};
++		};
++		port@2 {
++			vin7_max9286_des1ep3: endpoint@0 {
++				remote-endpoint = <&max9286_des1ep3>;
++			};
++			vin7_ti964_des1ep3: endpoint@1 {
++				remote-endpoint = <&ti964_des1ep3>;
++			};
++		};
++	};
++};
++
++&csi2_40 {
++	status = "okay";
++
++	virtual,channel {
++		csi2_vc0 {
++			data,type = "ycbcr422";
++			receive,vc = <0>;
++		};
++		csi2_vc1 {
++			data,type = "ycbcr422";
++			receive,vc = <1>;
++		};
++		csi2_vc2 {
++			data,type = "ycbcr422";
++			receive,vc = <2>;
++		};
++		csi2_vc3 {
++			data,type = "ycbcr422";
++			receive,vc = <3>;
++		};
++	};
++
++	port {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		csi2_40_ep: endpoint {
++			clock-lanes = <0>;
++			data-lanes = <1 2 3 4>;
++			csi-rate = <300>;
++		};
++	};
++};
++
++&csi2_41 {
++	status = "okay";
++
++	virtual,channel {
++		csi2_vc0 {
++			data,type = "ycbcr422";
++			receive,vc = <0>;
++		};
++		csi2_vc1 {
++			data,type = "ycbcr422";
++			receive,vc = <1>;
++		};
++		csi2_vc2 {
++			data,type = "ycbcr422";
++			receive,vc = <2>;
++		};
++		csi2_vc3 {
++			data,type = "ycbcr422";
++			receive,vc = <3>;
++		};
++	};
++
++	port {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		csi2_41_ep: endpoint {
++			clock-lanes = <0>;
++			data-lanes = <1 2 3 4>;
++			csi-rate = <300>;
++		};
++	};
++};
++
++&rcar_sound {
++	pinctrl-0 = <&sound_clk_pins>;
++
++	/* Multi DAI */
++	#sound-dai-cells = <1>;
++};
++
++&sata {
++	status = "okay";
++};
++
++&ssi1 {
++	/delete-property/shared-pin;
++};
++
++&avb {
++	/delete-property/phy-handle;
++	/delete-property/phy-gpios;
++	phy-mode = "rgmii";
++
++	/delete-node/ethernet-phy@0;
++
++	fixed-link {
++		speed = <100>;
++		full-duplex;
++	};
++};
++
++&msiof1 {
++	status = "disabled";
++};
++
++&usb2_phy0 {
++	pinctrl-0 = <&usb0_pins>;
++	pinctrl-names = "default";
++
++	status = "okay";
++};
++
++&xhci0 {
++	status = "okay";
++};
++
++&hsusb {
++	status = "okay";
++};
++
++&ehci0 {
++	status = "okay";
++};
++
++&ohci0 {
++	status = "okay";
++};
++
++&can0 {
++	pinctrl-0 = <&can0_pins>;
++	pinctrl-names = "default";
++	status = "okay";
++
++	renesas,can-clock-select = <0x0>;
++};
++
++&can1 {
++	pinctrl-0 = <&can1_pins>;
++	pinctrl-names = "default";
++	status = "okay";
++
++	renesas,can-clock-select = <0x0>;
++};
++
++&canfd {
++	pinctrl-0 = <&canfd0_pins &canfd1_pins>;
++	pinctrl-names = "default";
++	status = "disabled";
++
++	renesas,can-clock-select = <0x0>;
++
++	channel0 {
++		status = "okay";
++	};
++
++	channel1 {
++		status = "okay";
++	};
++};
++
++/* uncomment to enable CN12 on VIN4-7 */
++//#include "ulcb-vb-cn12.dtsi"
+diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts
+new file mode 100644
+index 0000000..1263637
+--- /dev/null
++++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts
+@@ -0,0 +1,1787 @@
++/*
++ * Device Tree Source for the H3ULCB Videobox board
++ *
++ * Copyright (C) 2017 Renesas Electronics Corp.
++ * Copyright (C) 2017 Cogent Embedded, Inc.
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2.  This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++#include "r8a7795-h3ulcb.dts"
++
++/ {
++	model = "Renesas H3ULCB Videobox board based on r8a7795";
++
++	leds {
++		compatible = "gpio-leds";
++
++		led5 {
++			gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
++		};
++		led6 {
++			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
++		};
++		/* D13 - status 0 */
++		led_ext00 {
++			gpios = <&gpio_ext_led 0 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "heartbeat";
++		};
++		/* D14 - status 1 */
++		led_ext01 {
++			gpios = <&gpio_ext_led 1 GPIO_ACTIVE_LOW>;
++			linux,default-trigger = "mmc1";
++		};
++		/* D16 - HDMI1 */
++		led_ext02 {
++			gpios = <&gpio_ext_led 2 GPIO_ACTIVE_LOW>;
++		};
++		/* D18 - HDMI0 */
++		led_ext03 {
++			gpios = <&gpio_ext_led 3 GPIO_ACTIVE_LOW>;
++		};
++		/* D20 - USB3.0 - 0.1 */
++		led_ext04 {
++			gpios = <&gpio_ext_led 4 GPIO_ACTIVE_LOW>;
++		};
++		/* D21 - USB3.0 - 0.2 */
++		led_ext05 {
++			gpios = <&gpio_ext_led 5 GPIO_ACTIVE_LOW>;
++		};
++		/* D24 - USB3.0 - 1.1 */
++		led6_ext06 {
++			gpios = <&gpio_ext_led 6 GPIO_ACTIVE_LOW>;
++		};
++		/* D25 - USB3.0 - 1.2 */
++		led_ext07 {
++			gpios = <&gpio_ext_led 7 GPIO_ACTIVE_LOW>;
++		};
++	};
++
++	snd_clk: snd_clk {
++		compatible = "fixed-clock";
++		#clock-cells = <0>;
++		clock-frequency = <24576000>;
++		clock-output-names = "scki";
++	};
++
++	vccq_sdhi3: regulator@5 {
++		compatible = "regulator-fixed";
++
++		regulator-name = "SDHI3 VccQ";
++		/* external voltage translator to 1.8V */
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++	};
++
++	fpdlink_switch: regulator@8 {
++		compatible = "regulator-fixed";
++		regulator-name = "fpdlink_on";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		gpio = <&gpio1 20 0>;
++		enable-active-high;
++		regulator-always-on;
++	};
++
++	hub_reset: regulator@9 {
++		compatible = "regulator-fixed";
++		regulator-name = "hub_reset";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		gpio = <&gpio5 5 0>;
++		enable-active-high;
++		regulator-always-on;
++	};
++
++	hub_power: regulator@10 {
++		compatible = "regulator-fixed";
++		regulator-name = "hub_power";
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		gpio = <&gpio6 28 0>;
++		enable-active-high;
++		regulator-always-on;
++	};
++
++	/delete-node/sound;
++
++	rsnd_ak4613: sound@0 {
++		pinctrl-0 = <&sound_0_pins>;
++		pinctrl-names = "default";
++		compatible = "simple-audio-card";
++
++		simple-audio-card,format = "left_j";
++		simple-audio-card,name = "ak4613";
++
++		simple-audio-card,bitclock-master = <&sndcpu>;
++		simple-audio-card,frame-master = <&sndcpu>;
++
++		sndcpu: simple-audio-card,cpu@1 {
++			sound-dai = <&rcar_sound>;
++		};
++
++		sndcodec: simple-audio-card,codec@1 {
++			sound-dai = <&ak4613>;
++		};
++	};
++
++	lvds-encoder {
++		compatible = "thine,thc63lvdm83d";
++
++		ports {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			port@0 {
++				reg = <0>;
++				lvds_enc_in: endpoint {
++					remote-endpoint = <&du_out_lvds0>;
++				};
++			};
++			port@1 {
++				reg = <1>;
++				lvds_enc_out: endpoint {
++					remote-endpoint = <&lvds_in>;
++				};
++			};
++		};
++	};
++
++	lvds {
++		compatible = "lvds-connector";
++
++		width-mm = <210>;
++		height-mm = <158>;
++
++		panel-timing {
++			/* 1280x800 @60Hz */
++			clock-frequency = <65000000>;
++			hactive = <1280>;
++			vactive = <800>;
++			hsync-len = <40>;
++			hfront-porch = <80>;
++			hback-porch = <40>;
++			vfront-porch = <14>;
++			vback-porch = <14>;
++			vsync-len = <4>;
++		};
++
++		port {
++			lvds_in: endpoint {
++				remote-endpoint = <&lvds_enc_out>;
++			};
++		};
++	};
++
++	hdmi1-out {
++		compatible = "hdmi-connector";
++		type = "a";
++
++		port {
++			hdmi1_con: endpoint {
++				remote-endpoint = <&rcar_dw_hdmi1_out>;
++			};
++		};
++	};
++
++	excan_ref_clk: excan-ref-clock {
++		compatible = "fixed-clock";
++		#clock-cells = <0>;
++		clock-frequency = <16000000>;
++	};
++
++	radio: si468x@0 {
++		compatible = "si,si468x-pcm";
++		status = "okay";
++
++		#sound-dai-cells = <0>;
++	};
++
++	spi_gpio_sw {
++		compatible = "spi-gpio";
++		#address-cells = <0x1>;
++		#size-cells = <0x0>;
++		gpio-sck = <&gpio0 8 GPIO_ACTIVE_HIGH>;
++		gpio-miso = <&gpio0 10 GPIO_ACTIVE_HIGH>;
++		gpio-mosi = <&gpio0 11 GPIO_ACTIVE_HIGH>;
++		cs-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
++		num-chipselects = <1>;
++
++		spidev: spidev@0 {
++			compatible = "spidev", "spi-gpio";
++			reg = <0>;
++			spi-max-frequency = <25000000>;
++			spi-cpha;
++			spi-cpol;
++		};
++	};
++
++	spi_gpio_can {
++		compatible = "spi-gpio";
++		#address-cells = <0x1>;
++		#size-cells = <0x0>;
++		gpio-sck = <&gpio1 2 GPIO_ACTIVE_HIGH>;
++		gpio-miso = <&gpio1 3 GPIO_ACTIVE_HIGH>;
++		gpio-mosi = <&gpio1 1 GPIO_ACTIVE_HIGH>;
++		cs-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
++			    &gpio1 4 GPIO_ACTIVE_HIGH>;
++		num-chipselects = <2>;
++
++		spican0: spidev@0 {
++			compatible = "microchip,mcp2515";
++			reg = <0>;
++			clocks = <&excan_ref_clk>;
++			interrupt-parent = <&gpio0>;
++			interrupts = <15 GPIO_ACTIVE_LOW>;
++			spi-max-frequency = <10000000>;
++		};
++		spican1: spidev@1 {
++			compatible = "microchip,mcp2515";
++			reg = <1>;
++			clocks = <&excan_ref_clk>;
++			interrupt-parent = <&gpio1>;
++			interrupts = <5 GPIO_ACTIVE_LOW>;
++			spi-max-frequency = <10000000>;
++		};
++	};
++};
++
++&du {
++	ports {
++		port@1 {
++			endpoint {
++				remote-endpoint = <&rcar_dw_hdmi0_in>;
++			};
++		};
++		port@2 {
++			endpoint {
++				remote-endpoint = <&rcar_dw_hdmi1_in>;
++			};
++		};
++		port@3 {
++			endpoint {
++				remote-endpoint = <&lvds_enc_in>;
++			};
++		};
++	};
++};
++
++&hdmi1 {
++	status = "okay";
++
++	ports {
++		#address-cells = <1>;
++		#size-cells = <0>;
++		port@0 {
++			reg = <0>;
++			rcar_dw_hdmi1_in: endpoint {
++				remote-endpoint = <&du_out_hdmi1>;
++			};
++		};
++		port@1 {
++			reg = <1>;
++			rcar_dw_hdmi1_out: endpoint {
++				remote-endpoint = <&hdmi1_con>;
++			};
++		};
++	};
++};
++
++&pfc {
++	hscif4_pins: hscif4 {
++		groups = "hscif4_data_a", "hscif4_ctrl";
++		function = "hscif4";
++	};
++
++	sdhi3_pins_3v3: sd3_3v3 {
++		groups = "sdhi3_data4", "sdhi3_ctrl";
++		function = "sdhi3";
++		power-source = <3300>;
++	};
++
++	/delete-node/sound;
++
++	sound_0_pins: sound1 {
++		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
++		function = "ssi";
++	};
++
++	usb0_pins: usb0 {
++		groups = "usb0";
++		function = "usb0";
++	};
++
++	can0_pins: can0 {
++		groups = "can0_data_a";
++		function = "can0";
++	};
++
++	can1_pins: can1 {
++		groups = "can1_data";
++		function = "can1";
++	};
++
++	canfd0_pins: canfd0 {
++		groups = "canfd0_data_a";
++		function = "canfd0";
++	};
++
++	canfd1_pins: canfd1 {
++		groups = "canfd1_data";
++		function = "canfd1";
++	};
++};
++
++&gpio0 {
++	video_a_irq {
++		gpio-hog;
++		gpios = <12 GPIO_ACTIVE_HIGH>;
++		input;
++		line-name = "Video-A irq";
++	};
++
++	video_b_irq {
++		gpio-hog;
++		gpios = <13 GPIO_ACTIVE_HIGH>;
++		input;
++		line-name = "Video-B irq";
++	};
++
++	video_c_irq {
++		gpio-hog;
++		gpios = <14 GPIO_ACTIVE_HIGH>;
++		input;
++		line-name = "Video-C irq";
++	};
++};
++
++&gpio1 {
++	gpioext_4_22_irq {
++		gpio-hog;
++		gpios = <25 GPIO_ACTIVE_HIGH>;
++		input;
++		line-name = "0x22@i2c4 irq";
++	};
++	pcie_disable {
++		gpio-hog;
++		gpios = <11 GPIO_ACTIVE_HIGH>;
++		output-high;
++		line-name = "mPCIe W_DISABLE";
++	};
++	m2_sleep {
++		gpio-hog;
++		gpios = <6 GPIO_ACTIVE_HIGH>;
++		output-high;
++		line-name = "M.2 SLEEP#";
++	};
++	m2_pres {
++		gpio-hog;
++		gpios = <7 GPIO_ACTIVE_HIGH>;
++		input;
++		line-name = "M.2 Present";
++	};
++	m2_pcie_det {
++		gpio-hog;
++		gpios = <18 GPIO_ACTIVE_HIGH>;
++		input;
++		line-name = "M.2 PCIe detected";
++	};
++	m2_usb_det {
++		gpio-hog;
++		gpios = <19 GPIO_ACTIVE_HIGH>;
++		input;
++		line-name = "M.2 USB30 detected";
++	};
++	m2_usb_det {
++		gpio-hog;
++		gpios = <27 GPIO_ACTIVE_HIGH>;
++		input;
++		line-name = "M.2 SSD detected";
++	};
++	eth_phy_reset {
++		gpio-hog;
++		gpios = <16 GPIO_ACTIVE_HIGH>;
++		output-high;
++		line-name = "BR phy reset";
++	};
++	eth_sw_reset {
++		gpio-hog;
++		gpios = <17 GPIO_ACTIVE_HIGH>;
++		output-high;
++		line-name = "BR switch reset";
++	};
++};
++
++&gpio2 {
++	m2_wake {
++		gpio-hog;
++		gpios = <1 GPIO_ACTIVE_HIGH>;
++		input;
++		line-name = "M.2 WAKE#";
++	};
++	m2_pcie_en {
++		gpio-hog;
++		gpios = <4 GPIO_ACTIVE_HIGH>;
++		output-high;
++		line-name = "M.2 PCIe enable";
++	};
++};
++
++&gpio3 {
++	m2_power_off {
++		gpio-hog;
++		gpios = <15 GPIO_ACTIVE_HIGH>;
++		output-high;
++		line-name = "M.2 FULL_CARD_POWER_OFF#";
++	};
++};
++
++&gpio6 {
++	pcie_wake {
++		gpio-hog;
++		gpios = <4 GPIO_ACTIVE_HIGH>;
++		input;
++		line-name = "mPCIe WAKE#";
++	};
++	pcie_clkreq {
++		gpio-hog;
++		gpios = <10 GPIO_ACTIVE_HIGH>;
++		input;
++		line-name = "mPCIe CLKREQ#";
++	};
++	m2_rst {
++		gpio-hog;
++		gpios = <21 GPIO_ACTIVE_HIGH>;
++		output-high;
++		line-name = "M.2 RESET#";
++	};
++};
++
++&hscif4 {
++	pinctrl-0 = <&hscif4_pins>;
++	pinctrl-names = "default";
++	ctsrts;
++
++	status = "okay";
++};
++
++&i2c2 {
++	clock-frequency = <400000>;
++
++	i2cswitch2: pca9548@74 {
++		compatible = "nxp,pca9548";
++		#address-cells = <1>;
++		#size-cells = <0>;
++		reg = <0x74>;
++		reset-gpios = <&gpio6 5 GPIO_ACTIVE_LOW>;
++
++		i2c@0 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <0>;
++			/* USB3.0 HUB node(s) */
++		};
++
++		i2c@6 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <6>;
++			/* PCIe node(s) */
++		};
++
++		i2c@7 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <7>;
++			/* Slot A (CN10) */
++
++			ov106xx@0 {
++				compatible = "ovti,ov106xx";
++				reg = <0x60>;
++
++				port@0 {
++					ov106xx_in0: endpoint {
++						clock-lanes = <0>;
++						data-lanes = <1 2 3 4>;
++						remote-endpoint = <&vin0ep0>;
++					};
++				};
++				port@1 {
++					ov106xx_max9286_des0ep0: endpoint@0 {
++						remote-endpoint = <&max9286_des0ep0>;
++					};
++					ov106xx_ti964_des0ep0: endpoint@1 {
++						remote-endpoint = <&ti964_des0ep0>;
++					};
++					ov106xx_ti954_des0ep0: endpoint@2 {
++						remote-endpoint = <&ti954_des0ep0>;
++					};
++				};
++			};
++
++			ov106xx@1 {
++				compatible = "ovti,ov106xx";
++				reg = <0x61>;
++
++				port@0 {
++					ov106xx_in1: endpoint {
++						clock-lanes = <0>;
++						data-lanes = <1 2 3 4>;
++						remote-endpoint = <&vin1ep0>;
++					};
++				};
++				port@1 {
++					ov106xx_max9286_des0ep1: endpoint@0 {
++						remote-endpoint = <&max9286_des0ep1>;
++					};
++					ov106xx_ti964_des0ep1: endpoint@1 {
++						remote-endpoint = <&ti964_des0ep1>;
++					};
++					ov106xx_ti954_des0ep1: endpoint@2 {
++						remote-endpoint = <&ti954_des0ep1>;
++					};
++				};
++			};
++
++			ov106xx@2 {
++				compatible = "ovti,ov106xx";
++				reg = <0x62>;
++
++				port@0 {
++					ov106xx_in2: endpoint {
++						clock-lanes = <0>;
++						data-lanes = <1 2 3 4>;
++						remote-endpoint = <&vin2ep0>;
++					};
++				};
++				port@1 {
++					ov106xx_max9286_des0ep2: endpoint@0 {
++						remote-endpoint = <&max9286_des0ep2>;
++					};
++					ov106xx_ti964_des0ep2: endpoint@1 {
++						remote-endpoint = <&ti964_des0ep2>;
++					};
++				};
++			};
++
++			ov106xx@3 {
++				compatible = "ovti,ov106xx";
++				reg = <0x63>;
++
++				port@0 {
++					ov106xx_in3: endpoint {
++						clock-lanes = <0>;
++						data-lanes = <1 2 3 4>;
++						remote-endpoint = <&vin3ep0>;
++					};
++				};
++				port@1 {
++					ov106xx_max9286_des0ep3: endpoint@0 {
++						remote-endpoint = <&max9286_des0ep3>;
++					};
++					ov106xx_ti964_des0ep3: endpoint@1 {
++						remote-endpoint = <&ti964_des0ep3>;
++					};
++				};
++			};
++
++			/* DS90UB964 @ 0x3a */
++			ti964-ti9x3@0 {
++				compatible = "ti,ti964-ti9x3";
++				reg = <0x3a>;
++				ti,sensor_delay = <350>;
++				ti,links = <4>;
++				ti,lanes = <4>;
++				ti,forwarding-mode = "round-robin";
++				ti,cable-mode = "stp";
++
++				port@0 {
++					ti964_des0ep0: endpoint@0 {
++						ti9x3-addr = <0x0c>;
++						dvp-order = <0>;
++						remote-endpoint = <&ov106xx_in0>;
++					};
++					ti964_des0ep1: endpoint@1 {
++						ti9x3-addr = <0x0d>;
++						dvp-order = <0>;
++						remote-endpoint = <&ov106xx_in1>;
++					};
++					ti964_des0ep2: endpoint@2 {
++						ti9x3-addr = <0x0e>;
++						dvp-order = <0>;
++						remote-endpoint = <&ov106xx_in2>;
++					};
++					ti964_des0ep3: endpoint@3 {
++						ti9x3-addr = <0x0f>;
++						dvp-order = <0>;
++						remote-endpoint = <&ov106xx_in3>;
++					};
++				};
++				port@1 {
++					ti964_csi0ep0: endpoint {
++						csi-rate = <1450>;
++						remote-endpoint = <&csi2_40_ep>;
++					};
++				};
++			};
++
++			/* DS90UB954 @ 0x38 */
++			ti954-ti9x3@0 {
++				compatible = "ti,ti954-ti9x3";
++				reg = <0x38>;
++				/* gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; */
++				ti,sensor_delay = <350>;
++				ti,links = <2>;
++				ti,lanes = <4>;
++				ti,forwarding-mode = "round-robin";
++				ti,cable-mode = "stp";
++
++				port@0 {
++					ti954_des0ep0: endpoint@0 {
++						ti9x3-addr = <0x0c>;
++						dvp-order = <0>;
++						remote-endpoint = <&ov106xx_in0>;
++					};
++					ti954_des0ep1: endpoint@1 {
++						ti9x3-addr = <0x0d>;
++						dvp-order = <0>;
++						remote-endpoint = <&ov106xx_in1>;
++					};
++				};
++				port@1 {
++					ti954_csi0ep0: endpoint {
++						csi-rate = <1450>;
++						remote-endpoint = <&csi2_40_ep>;
++					};
++				};
++			};
++
++			/* MAX9286 @ 0x2c */
++			max9286-max9271@0 {
++				compatible = "maxim,max9286-max9271";
++				reg = <0x2c>;
++				maxim,sensor_delay = <350>;
++				maxim,links = <4>;
++				maxim,lanes = <4>;
++				maxim,resetb-gpio = <1>;
++				maxim,fsync-mode = "automatic";
++				maxim,timeout = <100>;
++
++				port@0 {
++					max9286_des0ep0: endpoint@0 {
++						max9271-addr = <0x50>;
++						dvp-order = <1>;
++						remote-endpoint = <&ov106xx_in0>;
++					};
++					max9286_des0ep1: endpoint@1 {
++						max9271-addr = <0x51>;
++						dvp-order = <1>;
++						remote-endpoint = <&ov106xx_in1>;
++					};
++					max9286_des0ep2: endpoint@2 {
++						max9271-addr = <0x52>;
++						dvp-order = <1>;
++						remote-endpoint = <&ov106xx_in2>;
++					};
++					max9286_des0ep3: endpoint@3 {
++						max9271-addr = <0x53>;
++						dvp-order = <1>;
++						remote-endpoint = <&ov106xx_in3>;
++					};
++				};
++				port@1 {
++					max9286_csi0ep0: endpoint {
++						csi-rate = <700>;
++						remote-endpoint = <&csi2_40_ep>;
++					};
++				};
++			};
++		};
++
++		i2c@2 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <2>;
++			/* Slot B (CN11) */
++
++			ov106xx@4 {
++				compatible = "ovti,ov106xx";
++				reg = <0x64>;
++
++				port@0 {
++					ov106xx_in4: endpoint {
++						clock-lanes = <0>;
++						data-lanes = <1 2 3 4>;
++						remote-endpoint = <&vin4ep0>;
++					};
++				};
++				port@1 {
++					ov106xx_max9286_des1ep0: endpoint@0 {
++						remote-endpoint = <&max9286_des1ep0>;
++					};
++					ov106xx_ti964_des1ep0: endpoint@1 {
++						remote-endpoint = <&ti964_des1ep0>;
++					};
++					ov106xx_ti954_des1ep0: endpoint@2 {
++						remote-endpoint = <&ti954_des1ep0>;
++					};
++				};
++			};
++
++			ov106xx@5 {
++				compatible = "ovti,ov106xx";
++				reg = <0x65>;
++
++				port@0 {
++					ov106xx_in5: endpoint {
++						clock-lanes = <0>;
++						data-lanes = <1 2 3 4>;
++						remote-endpoint = <&vin5ep0>;
++					};
++				};
++				port@1 {
++					ov106xx_max9286_des1ep1: endpoint@0 {
++						remote-endpoint = <&max9286_des1ep1>;
++					};
++					ov106xx_ti964_des1ep1: endpoint@1 {
++						remote-endpoint = <&ti964_des1ep1>;
++					};
++					ov106xx_ti954_des1ep1: endpoint@2 {
++						remote-endpoint = <&ti954_des1ep1>;
++					};
++				};
++			};
++
++			ov106xx@6 {
++				compatible = "ovti,ov106xx";
++				reg = <0x66>;
++
++				port@0 {
++					ov106xx_in6: endpoint {
++						clock-lanes = <0>;
++						data-lanes = <1 2 3 4>;
++						remote-endpoint = <&vin6ep0>;
++					};
++				};
++				port@1 {
++					ov106xx_max9286_des1ep2: endpoint@0 {
++						remote-endpoint = <&max9286_des1ep2>;
++					};
++					ov106xx_ti964_des1ep2: endpoint@1 {
++						remote-endpoint = <&ti964_des1ep2>;
++					};
++				};
++			};
++
++			ov106xx@7 {
++				compatible = "ovti,ov106xx";
++				reg = <0x67>;
++
++				port@0 {
++					ov106xx_in7: endpoint {
++						clock-lanes = <0>;
++						data-lanes = <1 2 3 4>;
++						remote-endpoint = <&vin7ep0>;
++					};
++				};
++				port@1 {
++					ov106xx_max9286_des1ep3: endpoint@0 {
++						remote-endpoint = <&max9286_des1ep3>;
++					};
++					ov106xx_ti964_des1ep3: endpoint@1 {
++						remote-endpoint = <&ti964_des1ep3>;
++					};
++				};
++			};
++
++			/* DS90UB964 @ 0x3a */
++			ti964-ti9x3@1 {
++				compatible = "ti,ti964-ti9x3";
++				reg = <0x3a>;
++				ti,sensor_delay = <350>;
++				ti,links = <4>;
++				ti,lanes = <4>;
++				ti,forwarding-mode = "round-robin";
++				ti,cable-mode = "stp";
++
++				port@0 {
++					ti964_des1ep0: endpoint@0 {
++						ti9x3-addr = <0x0c>;
++						dvp-order = <0>;
++						remote-endpoint = <&ov106xx_in4>;
++					};
++					ti964_des1ep1: endpoint@1 {
++						ti9x3-addr = <0x0d>;
++						dvp-order = <0>;
++						remote-endpoint = <&ov106xx_in5>;
++					};
++					ti964_des1ep2: endpoint@2 {
++						ti9x3-addr = <0x0e>;
++						dvp-order = <0>;
++						remote-endpoint = <&ov106xx_in6>;
++					};
++					ti964_des1ep3: endpoint@3 {
++						ti9x3-addr = <0x0f>;
++						dvp-order = <0>;
++						remote-endpoint = <&ov106xx_in7>;
++					};
++				};
++				port@1 {
++					ti964_csi2ep0: endpoint {
++						csi-rate = <1450>;
++						remote-endpoint = <&csi2_41_ep>;
++					};
++				};
++			};
++
++			/* DS90UB954 @ 0x38 */
++			ti954-ti9x3@1 {
++				compatible = "ti,ti954-ti9x3";
++				reg = <0x38>;
++				/* gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>; */
++				ti,sensor_delay = <350>;
++				ti,links = <2>;
++				ti,lanes = <4>;
++				ti,forwarding-mode = "round-robin";
++				ti,cable-mode = "stp";
++
++				port@0 {
++					ti954_des1ep0: endpoint@0 {
++						ti9x3-addr = <0x0c>;
++						dvp-order = <0>;
++						remote-endpoint = <&ov106xx_in4>;
++					};
++					ti954_des1ep1: endpoint@1 {
++						ti9x3-addr = <0x0d>;
++						dvp-order = <0>;
++						remote-endpoint = <&ov106xx_in5>;
++					};
++				};
++				port@1 {
++					ti954_csi2ep0: endpoint {
++						csi-rate = <1450>;
++						remote-endpoint = <&csi2_41_ep>;
++					};
++				};
++			};
++
++			/* MAX9286 @ 0x2c */
++			max9286-max9271@1 {
++				compatible = "maxim,max9286-max9271";
++				reg = <0x2c>;
++				maxim,sensor_delay = <350>;
++				maxim,links = <4>;
++				maxim,lanes = <4>;
++				maxim,resetb-gpio = <1>;
++				maxim,fsync-mode = "automatic";
++				maxim,timeout = <100>;
++
++				port@0 {
++					max9286_des1ep0: endpoint@0 {
++						max9271-addr = <0x50>;
++						dvp-order = <1>;
++						remote-endpoint = <&ov106xx_in4>;
++					};
++					max9286_des1ep1: endpoint@1 {
++						max9271-addr = <0x51>;
++						dvp-order = <1>;
++						remote-endpoint = <&ov106xx_in5>;
++					};
++					max9286_des1ep2: endpoint@2 {
++						max9271-addr = <0x52>;
++						dvp-order = <1>;
++						remote-endpoint = <&ov106xx_in6>;
++					};
++					max9286_des1ep3: endpoint@3 {
++						max9271-addr = <0x53>;
++						dvp-order = <1>;
++						remote-endpoint = <&ov106xx_in7>;
++					};
++				};
++				port@1 {
++					max9286_csi2ep0: endpoint {
++						csi-rate = <700>;
++						remote-endpoint = <&csi2_41_ep>;
++					};
++				};
++			};
++		};
++
++		i2c@3 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <3>;
++			/* Slot C (CN12) */
++		};
++
++		i2c@1 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <1>;
++			/* Slot A (CN10) */
++
++			video_a_ext0: pca9535@26 {
++				compatible = "nxp,pca9535";
++				reg = <0x26>;
++				gpio-controller;
++				#gpio-cells = <2>;
++
++				video_a_des_cfg1 {
++					gpio-hog;
++					gpios = <5 GPIO_ACTIVE_HIGH>;
++					input;
++					line-name = "Video-A cfg1";
++				};
++				video_a_des_cfg0 {
++					gpio-hog;
++					gpios = <6 GPIO_ACTIVE_HIGH>;
++					input;
++					line-name = "Video-A cfg0";
++				};
++				video_a_pwr_shdn {
++					gpio-hog;
++					gpios = <3 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-A PWR_SHDN";
++				};
++				video_a_cam_pwr0 {
++					gpio-hog;
++					gpios = <12 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-A PWR0";
++				};
++				video_a_cam_pwr1 {
++					gpio-hog;
++					gpios = <13 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-A PWR1";
++				};
++				video_a_cam_pwr2 {
++					gpio-hog;
++					gpios = <14 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-A PWR2";
++				};
++				video_a_cam_pwr3 {
++					gpio-hog;
++					gpios = <15 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-A PWR3";
++				};
++				video_a_des_shdn {
++					gpio-hog;
++					gpios = <4 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-A DES_SHDN";
++				};
++				video_a_des_led {
++					gpio-hog;
++					gpios = <7 GPIO_ACTIVE_HIGH>;
++					output-low;
++					line-name = "Video-A led";
++				};
++			};
++
++			video_a_ext1: max7325@5c {
++				compatible = "maxim,max7325";
++				reg = <0x5c>;
++				gpio-controller;
++				#gpio-cells = <2>;
++
++				video_a_des_cfg2 {
++					gpio-hog;
++					gpios = <4 GPIO_ACTIVE_HIGH>;
++					input;
++					line-name = "Video-A cfg2";
++				};
++				video_a_des_cfg1 {
++					gpio-hog;
++					gpios = <6 GPIO_ACTIVE_HIGH>;
++					input;
++					line-name = "Video-A cfg1";
++				};
++				video_a_des_cfg0 {
++					gpio-hog;
++					gpios = <7 GPIO_ACTIVE_HIGH>;
++					input;
++					line-name = "Video-A cfg0";
++				};
++				video_a_pwr_shdn {
++					gpio-hog;
++					gpios = <14 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-A PWR_SHDN";
++				};
++				video_a_cam_pwr0 {
++					gpio-hog;
++					gpios = <8 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-A PWR0";
++				};
++				video_a_cam_pwr1 {
++					gpio-hog;
++					gpios = <9 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-A PWR1";
++				};
++				video_a_cam_pwr2 {
++					gpio-hog;
++					gpios = <10 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-A PWR2";
++				};
++				video_a_cam_pwr3 {
++					gpio-hog;
++					gpios = <11 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-A PWR3";
++				};
++				video_a_des_shdn {
++					gpio-hog;
++					gpios = <13 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-A DES_SHDN";
++				};
++				video_a_led {
++					gpio-hog;
++					gpios = <12 GPIO_ACTIVE_HIGH>;
++					output-low;
++					line-name = "Video-A LED";
++				};
++			};
++		};
++
++		i2c@5 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <5>;
++			/* Slot B (CN11) */
++
++			video_b_ext0: pca9535@26 {
++				compatible = "nxp,pca9535";
++				reg = <0x26>;
++				gpio-controller;
++				#gpio-cells = <2>;
++
++				video_b_des_cfg1 {
++					gpio-hog;
++					gpios = <5 GPIO_ACTIVE_HIGH>;
++					input;
++					line-name = "Video-B cfg1";
++				};
++				video_b_des_cfg0 {
++					gpio-hog;
++					gpios = <6 GPIO_ACTIVE_HIGH>;
++					input;
++					line-name = "Video-B cfg0";
++				};
++				video_b_pwr_shdn {
++					gpio-hog;
++					gpios = <3 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-B PWR_SHDN";
++				};
++				video_b_cam_pwr0 {
++					gpio-hog;
++					gpios = <12 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-B PWR0";
++				};
++				video_b_cam_pwr1 {
++					gpio-hog;
++					gpios = <13 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-B PWR1";
++				};
++				video_b_cam_pwr2 {
++					gpio-hog;
++					gpios = <14 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-B PWR2";
++				};
++				video_b_cam_pwr3 {
++					gpio-hog;
++					gpios = <15 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-B PWR3";
++				};
++				video_b_des_shdn {
++					gpio-hog;
++					gpios = <4 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-B DES_SHDN";
++				};
++				video_b_des_led {
++					gpio-hog;
++					gpios = <7 GPIO_ACTIVE_HIGH>;
++					output-low;
++					line-name = "Video-B led";
++				};
++			};
++
++			video_b_ext1: max7325@5c {
++				compatible = "maxim,max7325";
++				reg = <0x5c>;
++				gpio-controller;
++				#gpio-cells = <2>;
++
++				video_b_des_cfg2 {
++					gpio-hog;
++					gpios = <4 GPIO_ACTIVE_HIGH>;
++					input;
++					line-name = "Video-B cfg2";
++				};
++				video_b_des_cfg1 {
++					gpio-hog;
++					gpios = <6 GPIO_ACTIVE_HIGH>;
++					input;
++					line-name = "Video-B cfg1";
++				};
++				video_b_des_cfg0 {
++					gpio-hog;
++					gpios = <7 GPIO_ACTIVE_HIGH>;
++					input;
++					line-name = "Video-B cfg0";
++				};
++				video_b_pwr_shdn {
++					gpio-hog;
++					gpios = <14 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-B PWR_SHDN";
++				};
++				video_b_cam_pwr0 {
++					gpio-hog;
++					gpios = <8 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-B PWR0";
++				};
++				video_b_cam_pwr1 {
++					gpio-hog;
++					gpios = <9 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-B PWR1";
++				};
++				video_b_cam_pwr2 {
++					gpio-hog;
++					gpios = <10 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-B PWR2";
++				};
++				video_b_cam_pwr3 {
++					gpio-hog;
++					gpios = <11 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-B PWR3";
++				};
++				video_b_des_shdn {
++					gpio-hog;
++					gpios = <13 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "Video-B DES_SHDN";
++				};
++				video_b_led {
++					gpio-hog;
++					gpios = <12 GPIO_ACTIVE_HIGH>;
++					output-low;
++					line-name = "Video-B LED";
++				};
++			};
++		};
++
++		i2c@4 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <4>;
++			/* Slot C (CN12) */
++		};
++	};
++};
++
++&i2c4 {
++	i2cswitch4: pca9548@74 {
++		compatible = "nxp,pca9548";
++		#address-cells = <1>;
++		#size-cells = <0>;
++		reg = <0x74>;
++		reset-gpios= <&gpio5 15 GPIO_ACTIVE_LOW>;
++
++		i2c@0 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <0>;
++			/* FAN node - EMC2103 */
++			fan_ctrl:ecm2103@2e {
++				compatible = "emc2103";
++				reg = <0x2e>;
++			};
++		};
++
++		i2c@1 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <1>;
++			/* Power nodes - 2 x TPS544x20 */
++		};
++
++		i2c@2 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <2>;
++			/* CAN and power board nodes */
++
++			gpio_ext_pwr: pca9535@22 {
++				compatible = "nxp,pca9535";
++				reg = <0x22>;
++				gpio-controller;
++				#gpio-cells = <2>;
++				interrupt-controller;
++				interrupt-parent = <&gpio1>;
++				interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
++
++				/* enable input DCDC after wake-up signal released */
++				pwr_hold {
++					gpio-hog;
++					gpios = <11 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "pwr_hold";
++				};
++
++				/* CAN0 */
++				can0_stby {
++					gpio-hog;
++					gpios = <4 GPIO_ACTIVE_HIGH>;
++					output-low;
++					line-name = "can0_stby";
++				};
++				can0_load {
++					gpio-hog;
++					gpios = <0 GPIO_ACTIVE_HIGH>;
++					output-low;
++					line-name = "can0_120R_load";
++				};
++				/* CAN1 */
++				can1_stby {
++					gpio-hog;
++					gpios = <5 GPIO_ACTIVE_HIGH>;
++					output-low;
++					line-name = "can1_stby";
++				};
++				can1_load {
++					gpio-hog;
++					gpios = <1 GPIO_ACTIVE_HIGH>;
++					output-low;
++					line-name = "can1_120R_load";
++				};
++				/* CAN2 */
++				can2_stby {
++					gpio-hog;
++					gpios = <6 GPIO_ACTIVE_HIGH>;
++					output-low;
++					line-name = "can2_stby";
++				};
++				can2_load {
++					gpio-hog;
++					gpios = <2 GPIO_ACTIVE_HIGH>;
++					output-low;
++					line-name = "can2_120R_load";
++				};
++				can2_rst {
++					gpio-hog;
++					gpios = <8 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "can2_rst";
++				};
++				/* CAN3 */
++				can3_stby {
++					gpio-hog;
++					gpios = <7 GPIO_ACTIVE_HIGH>;
++					output-low;
++					line-name = "can3_stby";
++				};
++				can3_load {
++					gpio-hog;
++					gpios = <3 GPIO_ACTIVE_HIGH>;
++					output-low;
++					line-name = "can3_120R_load";
++				};
++				can3_rst {
++					gpio-hog;
++					gpios = <9 GPIO_ACTIVE_HIGH>;
++					output-high;
++					line-name = "can3_rst";
++				};
++			};
++		};
++
++		i2c@3 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <3>;
++			/* FPDLink output node - DS90UH947 */
++		};
++
++		i2c@4 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <4>;
++			/* BCM switch node */
++		};
++
++		i2c@5 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <5>;
++			/* LED board node(s) */
++
++			gpio_ext_led: pca9535@22 {
++				compatible = "nxp,pca9535";
++				reg = <0x22>;
++				gpio-controller;
++				#gpio-cells = <2>;
++
++				/* gpios 0..7 are used for indication LEDs, low-active */
++			};
++		};
++
++		i2c@6 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			reg = <6>;
++			/* M2 connector i2c node(s) */
++		};
++
++		/* port 7 is not used */
++	};
++};
++
++&pcie_bus_clk {
++	clock-frequency = <100000000>;
++	status = "okay";
++};
++
++&pciec0 {
++	status = "okay";
++};
++
++&pciec1 {
++	status = "okay";
++};
++
++&vin0 {
++	status = "okay";
++
++	ports {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		port@0 {
++			vin0ep0: endpoint {
++				csi,select = "csi40";
++				virtual,channel = <0>;
++				data-lanes = <1 2 3 4>;
++				remote-endpoint = <&ov106xx_in0>;
++			};
++		};
++		port@1 {
++			csi0ep0: endpoint {
++				remote-endpoint = <&csi2_40_ep>;
++			};
++		};
++		port@2 {
++			vin0_max9286_des0ep0: endpoint@0 {
++				remote-endpoint = <&max9286_des0ep0>;
++			};
++			vin0_ti964_des0ep0: endpoint@1 {
++				remote-endpoint = <&ti964_des0ep0>;
++			};
++			vin0_ti954_des0ep0: endpoint@2 {
++				remote-endpoint = <&ti954_des0ep0>;
++			};
++		};
++	};
++};
++
++&vin1 {
++	status = "okay";
++
++	ports {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		port@0 {
++			vin1ep0: endpoint {
++				csi,select = "csi40";
++				virtual,channel = <1>;
++				data-lanes = <1 2 3 4>;
++				remote-endpoint = <&ov106xx_in1>;
++			};
++		};
++		port@1 {
++			csi0ep1: endpoint {
++				remote-endpoint = <&csi2_40_ep>;
++			};
++		};
++		port@2 {
++			vin1_max9286_des0ep1: endpoint@0 {
++				remote-endpoint = <&max9286_des0ep1>;
++			};
++			vin1_ti964_des0ep1: endpoint@1 {
++				remote-endpoint = <&ti964_des0ep1>;
++			};
++			vin1_ti954_des0ep1: endpoint@2 {
++				remote-endpoint = <&ti954_des0ep1>;
++			};
++		};
++	};
++};
++
++&vin2 {
++	status = "okay";
++
++	ports {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		port@0 {
++			vin2ep0: endpoint {
++				csi,select = "csi40";
++				virtual,channel = <2>;
++				data-lanes = <1 2 3 4>;
++				remote-endpoint = <&ov106xx_in2>;
++			};
++		};
++		port@1 {
++			csi0ep2: endpoint {
++				remote-endpoint = <&csi2_40_ep>;
++			};
++		};
++		port@2 {
++			vin2_max9286_des0ep2: endpoint@0 {
++				remote-endpoint = <&max9286_des0ep2>;
++			};
++			vin2_ti964_des0ep2: endpoint@1 {
++				remote-endpoint = <&ti964_des0ep2>;
++			};
++		};
++	};
++};
++
++&vin3 {
++	status = "okay";
++
++	ports {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		port@0 {
++			vin3ep0: endpoint {
++				csi,select = "csi40";
++				virtual,channel = <3>;
++				data-lanes = <1 2 3 4>;
++				remote-endpoint = <&ov106xx_in3>;
++			};
++		};
++		port@1 {
++			csi0ep3: endpoint {
++				remote-endpoint = <&csi2_40_ep>;
++			};
++		};
++		port@2 {
++			vin3_max9286_des0ep3: endpoint@0 {
++				remote-endpoint = <&max9286_des0ep3>;
++			};
++			vin3_ti964_des0ep3: endpoint@1 {
++				remote-endpoint = <&ti964_des0ep3>;
++			};
++		};
++	};
++};
++
++&vin4 {
++	status = "okay";
++
++	ports {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		port@0 {
++			vin4ep0: endpoint {
++				csi,select = "csi41";
++				virtual,channel = <0>;
++				remote-endpoint = <&ov106xx_in4>;
++				data-lanes = <1 2 3 4>;
++			};
++		};
++		port@1 {
++			csi2ep0: endpoint {
++				remote-endpoint = <&csi2_41_ep>;
++			};
++		};
++		port@2 {
++			vin4_max9286_des1ep0: endpoint@0 {
++				remote-endpoint = <&max9286_des1ep0>;
++			};
++			vin4_ti964_des1ep0: endpoint@1 {
++				remote-endpoint = <&ti964_des1ep0>;
++			};
++			vin4_ti954_des1ep0: endpoint@2 {
++				remote-endpoint = <&ti954_des1ep0>;
++			};
++		};
++	};
++};
++
++&vin5 {
++	status = "okay";
++
++	ports {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		port@0 {
++			vin5ep0: endpoint@0 {
++				csi,select = "csi41";
++				virtual,channel = <1>;
++				remote-endpoint = <&ov106xx_in5>;
++				data-lanes = <1 2 3 4>;
++			};
++		};
++		port@1 {
++			csi2ep1: endpoint {
++				remote-endpoint = <&csi2_41_ep>;
++			};
++		};
++		port@2 {
++			vin5_max9286_des1ep1: endpoint@0 {
++				remote-endpoint = <&max9286_des1ep1>;
++			};
++			vin5_ti964_des1ep1: endpoint@1 {
++				remote-endpoint = <&ti964_des1ep1>;
++			};
++			vin5_ti954_des1ep1: endpoint@2 {
++				remote-endpoint = <&ti954_des1ep1>;
++			};
++		};
++	};
++};
++
++&vin6 {
++	status = "okay";
++
++	ports {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		port@0 {
++			vin6ep0: endpoint@0 {
++				csi,select = "csi41";
++				virtual,channel = <2>;
++				remote-endpoint = <&ov106xx_in6>;
++				data-lanes = <1 2 3 4>;
++			};
++		};
++		port@1 {
++			csi2ep2: endpoint {
++				remote-endpoint = <&csi2_41_ep>;
++			};
++		};
++		port@2 {
++			vin6_max9286_des1ep2: endpoint@0 {
++				remote-endpoint = <&max9286_des1ep2>;
++			};
++			vin6_ti964_des1ep2: endpoint@1 {
++				remote-endpoint = <&ti964_des1ep2>;
++			};
++		};
++	};
++};
++
++&vin7 {
++	status = "okay";
++
++	ports {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		port@0 {
++			vin7ep0: endpoint@0 {
++				csi,select = "csi41";
++				virtual,channel = <3>;
++				remote-endpoint = <&ov106xx_in7>;
++				data-lanes = <1 2 3 4>;
++			};
++		};
++		port@1 {
++			csi2ep3: endpoint {
++				remote-endpoint = <&csi2_41_ep>;
++			};
++		};
++		port@2 {
++			vin7_max9286_des1ep3: endpoint@0 {
++				remote-endpoint = <&max9286_des1ep3>;
++			};
++			vin7_ti964_des1ep3: endpoint@1 {
++				remote-endpoint = <&ti964_des1ep3>;
++			};
++		};
++	};
++};
++
++&csi2_40 {
++	status = "okay";
++
++	virtual,channel {
++		csi2_vc0 {
++			data,type = "ycbcr422";
++			receive,vc = <0>;
++		};
++		csi2_vc1 {
++			data,type = "ycbcr422";
++			receive,vc = <1>;
++		};
++		csi2_vc2 {
++			data,type = "ycbcr422";
++			receive,vc = <2>;
++		};
++		csi2_vc3 {
++			data,type = "ycbcr422";
++			receive,vc = <3>;
++		};
++	};
++
++	port {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		csi2_40_ep: endpoint {
++			clock-lanes = <0>;
++			data-lanes = <1 2 3 4>;
++			csi-rate = <300>;
++		};
++	};
++};
++
++&csi2_41 {
++	status = "okay";
++
++	virtual,channel {
++		csi2_vc0 {
++			data,type = "ycbcr422";
++			receive,vc = <0>;
++		};
++		csi2_vc1 {
++			data,type = "ycbcr422";
++			receive,vc = <1>;
++		};
++		csi2_vc2 {
++			data,type = "ycbcr422";
++			receive,vc = <2>;
++		};
++		csi2_vc3 {
++			data,type = "ycbcr422";
++			receive,vc = <3>;
++		};
++	};
++
++	port {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		csi2_41_ep: endpoint {
++			clock-lanes = <0>;
++			data-lanes = <1 2 3 4>;
++			csi-rate = <300>;
++		};
++	};
++};
++
++&rcar_sound {
++	pinctrl-0 = <&sound_clk_pins>;
++
++	/* Multi DAI */
++	#sound-dai-cells = <1>;
++};
++
++&sata {
++	status = "okay";
++};
++
++&ssi1 {
++	/delete-property/shared-pin;
++};
++
++&avb {
++	/delete-property/phy-handle;
++	/delete-property/phy-gpios;
++	phy-mode = "rgmii";
++
++	/delete-node/ethernet-phy@0;
++
++	fixed-link {
++		speed = <100>;
++		full-duplex;
++	};
++};
++
++&msiof1 {
++	status = "disabled";
++};
++
++&usb2_phy0 {
++	pinctrl-0 = <&usb0_pins>;
++	pinctrl-names = "default";
++
++	status = "okay";
++};
++
++&xhci0 {
++	status = "okay";
++};
++
++&hsusb0 {
++	status = "okay";
++};
++
++&ehci0 {
++	status = "okay";
++};
++
++&ohci0 {
++	status = "okay";
++};
++
++&can0 {
++	pinctrl-0 = <&can0_pins>;
++	pinctrl-names = "default";
++	status = "okay";
++
++	renesas,can-clock-select = <0x0>;
++};
++
++&can1 {
++	pinctrl-0 = <&can1_pins>;
++	pinctrl-names = "default";
++	status = "okay";
++
++	renesas,can-clock-select = <0x0>;
++};
++
++&canfd {
++	pinctrl-0 = <&canfd0_pins &canfd1_pins>;
++	pinctrl-names = "default";
++	status = "disabled";
++
++	renesas,can-clock-select = <0x0>;
++
++	channel0 {
++		status = "okay";
++	};
++
++	channel1 {
++		status = "okay";
++	};
++};
++
++/* uncomment to enable CN12 on VIN4-7 */
++//#include "ulcb-vb-cn12.dtsi"
+diff --git a/arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi b/arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi
+new file mode 100644
+index 0000000..9c6d10c
+--- /dev/null
++++ b/arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi
+@@ -0,0 +1,515 @@
++/*
++ * Device Tree Source for the H3ULCB Videobox board:
++ *  this adding conflicting resource on VIN4/VIN5/VIN6/VIN7 for CN12
++ *
++ * Copyright (C) 2017 Renesas Electronics Corp.
++ * Copyright (C) 2017 Cogent Embedded, Inc.
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2.  This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++&i2cswitch2 {
++	i2c@3 {
++		#address-cells = <1>;
++		#size-cells = <0>;
++		reg = <3>;
++		/* Slot C (CN12) */
++
++		ov106xx@8 {
++			compatible = "ovti,ov106xx";
++			reg = <0x68>;
++
++			port@0 {
++				ov106xx_in8: endpoint {
++					clock-lanes = <0>;
++					data-lanes = <1 2>;
++					remote-endpoint = <&vin4ep0>;
++				};
++			};
++			port@1 {
++				ov106xx_max9286_des2ep0: endpoint@0 {
++					remote-endpoint = <&max9286_des2ep0>;
++				};
++				ov106xx_ti964_des2ep0: endpoint@1 {
++					remote-endpoint = <&ti964_des2ep0>;
++				};
++				ov106xx_ti954_des2ep0: endpoint@2 {
++					remote-endpoint = <&ti954_des2ep0>;
++				};
++			};
++		};
++
++		ov106xx@9 {
++			compatible = "ovti,ov106xx";
++			reg = <0x69>;
++
++			port@0 {
++				ov106xx_in9: endpoint {
++					clock-lanes = <0>;
++					data-lanes = <1 2>;
++					remote-endpoint = <&vin5ep0>;
++				};
++			};
++			port@1 {
++				ov106xx_max9286_des2ep1: endpoint@0 {
++					remote-endpoint = <&max9286_des2ep1>;
++				};
++				ov106xx_ti964_des2ep1: endpoint@1 {
++					remote-endpoint = <&ti964_des2ep1>;
++				};
++				ov106xx_ti954_des2ep1: endpoint@2 {
++					remote-endpoint = <&ti954_des2ep1>;
++				};
++			};
++		};
++
++		ov106xx@10 {
++			compatible = "ovti,ov106xx";
++			reg = <0x6a>;
++
++			port@0 {
++				ov106xx_in10: endpoint {
++					clock-lanes = <0>;
++					data-lanes = <1 2>;
++					remote-endpoint = <&vin6ep0>;
++				};
++			};
++			port@1 {
++				ov106xx_max9286_des2ep2: endpoint@0 {
++					remote-endpoint = <&max9286_des2ep2>;
++				};
++				ov106xx_ti964_des2ep2: endpoint@1 {
++					remote-endpoint = <&ti964_des2ep2>;
++				};
++			};
++		};
++
++		ov106xx@11 {
++			compatible = "ovti,ov106xx";
++			reg = <0x6b>;
++
++			port@0 {
++				ov106xx_in11: endpoint {
++					clock-lanes = <0>;
++					data-lanes = <1 2>;
++					remote-endpoint = <&vin7ep0>;
++				};
++			};
++			port@1 {
++				ov106xx_max9286_des2ep3: endpoint@0 {
++					remote-endpoint = <&max9286_des2ep3>;
++				};
++				ov106xx_ti964_des2ep3: endpoint@1 {
++					remote-endpoint = <&ti964_des2ep3>;
++				};
++			};
++		};
++
++		/* DS90UB964 @ 0x3a */
++		ti964-ti9x3@2 {
++			compatible = "ti,ti964-ti9x3";
++			reg = <0x3a>;
++			ti,sensor_delay = <350>;
++			ti,links = <4>;
++			ti,lanes = <2>;
++			ti,forwarding-mode = "round-robin";
++			ti,cable-mode = "coax";
++
++			port@0 {
++				ti964_des2ep0: endpoint@0 {
++					ti9x3-addr = <0x0c>;
++					dvp-order = <0>;
++					remote-endpoint = <&ov106xx_in8>;
++				};
++				ti964_des2ep1: endpoint@1 {
++					ti9x3-addr = <0x0d>;
++					dvp-order = <0>;
++					remote-endpoint = <&ov106xx_in9>;
++				};
++				ti964_des2ep2: endpoint@2 {
++					ti9x3-addr = <0x0e>;
++					dvp-order = <0>;
++					remote-endpoint = <&ov106xx_in10>;
++				};
++				ti964_des2ep3: endpoint@3 {
++					ti9x3-addr = <0x0f>;
++					dvp-order = <0>;
++					remote-endpoint = <&ov106xx_in11>;
++				};
++			};
++			port@1 {
++				ti964_csi1ep0: endpoint {
++					csi-rate = <1450>;
++					remote-endpoint = <&csi2_20_ep>;
++				};
++			};
++		};
++
++		/* DS90UB954 @ 0x38 */
++		ti954-ti9x3@2 {
++			compatible = "ti,ti954-ti9x3";
++			reg = <0x38>;
++			/* gpios = <&video_c_ext1 10 GPIO_ACTIVE_HIGH>; */
++			ti,sensor_delay = <350>;
++			ti,links = <2>;
++			ti,lanes = <2>;
++			ti,forwarding-mode = "round-robin";
++			ti,cable-mode = "coax";
++
++			port@0 {
++				ti954_des2ep0: endpoint@0 {
++					ti9x3-addr = <0x0c>;
++					dvp-order = <0>;
++					remote-endpoint = <&ov106xx_in8>;
++				};
++				ti954_des2ep1: endpoint@1 {
++					ti9x3-addr = <0x0d>;
++					dvp-order = <0>;
++					remote-endpoint = <&ov106xx_in9>;
++				};
++			};
++			port@1 {
++				ti954_csi1ep0: endpoint {
++					csi-rate = <1450>;
++					remote-endpoint = <&csi2_20_ep>;
++				};
++			};
++		};
++
++		/* MAX9286 @ 0x2c */
++		max9286-max9271@2 {
++			compatible = "maxim,max9286-max9271";
++			reg = <0x2c>;
++			maxim,sensor_delay = <350>;
++			maxim,links = <4>;
++			maxim,lanes = <2>;
++			maxim,resetb-gpio = <1>;
++			maxim,fsync-mode = "automatic";
++			maxim,timeout = <100>;
++
++			port@0 {
++				max9286_des2ep0: endpoint@0 {
++					max9271-addr = <0x50>;
++					dvp-order = <1>;
++					remote-endpoint = <&ov106xx_in8>;
++				};
++				max9286_des2ep1: endpoint@1 {
++					max9271-addr = <0x51>;
++					dvp-order = <1>;
++					remote-endpoint = <&ov106xx_in9>;
++				};
++				max9286_des2ep2: endpoint@2 {
++					max9271-addr = <0x52>;
++					dvp-order = <1>;
++					remote-endpoint = <&ov106xx_in10>;
++				};
++				max9286_des2ep3: endpoint@3 {
++					max9271-addr = <0x53>;
++					dvp-order = <1>;
++					remote-endpoint = <&ov106xx_in11>;
++				};
++			};
++			port@1 {
++				max9286_csi1ep0: endpoint {
++					csi-rate = <700>;
++					remote-endpoint = <&csi2_20_ep>;
++				};
++			};
++		};
++	};
++
++	i2c@4 {
++		#address-cells = <1>;
++		#size-cells = <0>;
++		reg = <4>;
++		/* Slot C (CN12) */
++
++		video_c_ext0: pca9535@26 {
++			compatible = "nxp,pca9535";
++			reg = <0x26>;
++			gpio-controller;
++			#gpio-cells = <2>;
++
++			video_c_des_cfg1 {
++				gpio-hog;
++				gpios = <5 GPIO_ACTIVE_HIGH>;
++				input;
++				line-name = "Video-C cfg1";
++			};
++			video_c_des_cfg0 {
++				gpio-hog;
++				gpios = <6 GPIO_ACTIVE_HIGH>;
++				input;
++				line-name = "Video-C cfg0";
++			};
++			video_c_pwr_shdn {
++				gpio-hog;
++				gpios = <3 GPIO_ACTIVE_HIGH>;
++				output-high;
++				line-name = "Video-C PWR_SHDN";
++			};
++			video_c_cam_pwr0 {
++				gpio-hog;
++				gpios = <12 GPIO_ACTIVE_HIGH>;
++				output-high;
++				line-name = "Video-C PWR0";
++			};
++			video_c_cam_pwr1 {
++				gpio-hog;
++				gpios = <13 GPIO_ACTIVE_HIGH>;
++				output-high;
++				line-name = "Video-C PWR1";
++			};
++			video_c_cam_pwr2 {
++				gpio-hog;
++				gpios = <14 GPIO_ACTIVE_HIGH>;
++				output-high;
++				line-name = "Video-C PWR2";
++			};
++			video_c_cam_pwr3 {
++				gpio-hog;
++				gpios = <15 GPIO_ACTIVE_HIGH>;
++				output-high;
++				line-name = "Video-C PWR3";
++			};
++			video_c_des_shdn {
++				gpio-hog;
++				gpios = <4 GPIO_ACTIVE_HIGH>;
++				output-high;
++				line-name = "Video-C DES_SHDN";
++			};
++			video_c_des_led {
++				gpio-hog;
++				gpios = <7 GPIO_ACTIVE_HIGH>;
++				output-low;
++				line-name = "Video-C led";
++			};
++		};
++
++		video_c_ext1: max7325@5c {
++			compatible = "maxim,max7325";
++			reg = <0x5c>;
++			gpio-controller;
++			#gpio-cells = <2>;
++
++			video_c_des_cfg2 {
++				gpio-hog;
++				gpios = <4 GPIO_ACTIVE_HIGH>;
++				input;
++				line-name = "Video-C cfg2";
++			};
++			video_c_des_cfg1 {
++				gpio-hog;
++				gpios = <6 GPIO_ACTIVE_HIGH>;
++				input;
++				line-name = "Video-C cfg1";
++			};
++			video_c_des_cfg0 {
++				gpio-hog;
++				gpios = <7 GPIO_ACTIVE_HIGH>;
++				input;
++				line-name = "Video-C cfg0";
++			};
++			video_c_pwr_shdn {
++				gpio-hog;
++				gpios = <14 GPIO_ACTIVE_HIGH>;
++				output-high;
++				line-name = "Video-C PWR_SHDN";
++			};
++			video_c_cam_pwr0 {
++				gpio-hog;
++				gpios = <8 GPIO_ACTIVE_HIGH>;
++				output-high;
++				line-name = "Video-C PWR0";
++			};
++			video_c_cam_pwr1 {
++				gpio-hog;
++				gpios = <9 GPIO_ACTIVE_HIGH>;
++				output-high;
++				line-name = "Video-C PWR1";
++			};
++			video_c_cam_pwr2 {
++				gpio-hog;
++				gpios = <10 GPIO_ACTIVE_HIGH>;
++				output-high;
++				line-name = "Video-C PWR2";
++			};
++			video_c_cam_pwr3 {
++				gpio-hog;
++				gpios = <11 GPIO_ACTIVE_HIGH>;
++				output-high;
++				line-name = "Video-C PWR3";
++			};
++			video_c_des_shdn {
++				gpio-hog;
++				gpios = <13 GPIO_ACTIVE_HIGH>;
++				output-high;
++				line-name = "Video-C DES_SHDN";
++			};
++			video_c_led {
++				gpio-hog;
++				gpios = <12 GPIO_ACTIVE_HIGH>;
++				output-low;
++				line-name = "Video-C LED";
++			};
++		};
++	};
++};
++
++&vin4 {
++	ports {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		port@0 {
++			vin4ep0: endpoint {
++				csi,select = "csi20";
++				virtual,channel = <0>;
++				remote-endpoint = <&ov106xx_in8>;
++				data-lanes = <1 2>;
++			};
++		};
++		port@1 {
++			csi2ep0: endpoint {
++				remote-endpoint = <&csi2_20_ep>;
++			};
++		};
++		port@2 {
++			vin4_max9286_des2ep0: endpoint@0 {
++				remote-endpoint = <&max9286_des2ep0>;
++			};
++			vin4_ti964_des2ep0: endpoint@1 {
++				remote-endpoint = <&ti964_des2ep0>;
++			};
++			vin4_ti954_des2ep0: endpoint@2 {
++				remote-endpoint = <&ti954_des2ep0>;
++			};
++		};
++	};
++};
++
++&vin5 {
++	ports {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		port@0 {
++			vin5ep0: endpoint@0 {
++				csi,select = "csi20";
++				virtual,channel = <1>;
++				remote-endpoint = <&ov106xx_in9>;
++				data-lanes = <1 2>;
++			};
++		};
++		port@1 {
++			csi2ep1: endpoint {
++				remote-endpoint = <&csi2_20_ep>;
++			};
++		};
++		port@2 {
++			vin5_max9286_des2ep1: endpoint@0 {
++				remote-endpoint = <&max9286_des2ep1>;
++			};
++			vin5_ti964_des2ep1: endpoint@1 {
++				remote-endpoint = <&ti964_des2ep1>;
++			};
++			vin5_ti954_des2ep1: endpoint@2 {
++				remote-endpoint = <&ti954_des2ep1>;
++			};
++		};
++	};
++};
++
++&vin6 {
++	ports {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		port@0 {
++			vin6ep0: endpoint@0 {
++				csi,select = "csi20";
++				virtual,channel = <2>;
++				remote-endpoint = <&ov106xx_in10>;
++				data-lanes = <1 2>;
++			};
++		};
++		port@1 {
++			csi2ep2: endpoint {
++				remote-endpoint = <&csi2_20_ep>;
++			};
++		};
++		port@2 {
++			vin6_max9286_des2ep2: endpoint@0 {
++				remote-endpoint = <&max9286_des2ep2>;
++			};
++			vin6_ti964_des2ep2: endpoint@1 {
++				remote-endpoint = <&ti964_des2ep2>;
++			};
++		};
++	};
++};
++
++&vin7 {
++	ports {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		port@0 {
++			vin7ep0: endpoint@0 {
++				csi,select = "csi20";
++				virtual,channel = <3>;
++				remote-endpoint = <&ov106xx_in11>;
++				data-lanes = <1 2>;
++			};
++		};
++		port@1 {
++			csi2ep3: endpoint {
++				remote-endpoint = <&csi2_20_ep>;
++			};
++		};
++		port@2 {
++			vin7_max9286_des2ep3: endpoint@0 {
++				remote-endpoint = <&max9286_des2ep3>;
++			};
++			vin7_ti964_des2ep3: endpoint@1 {
++				remote-endpoint = <&ti964_des2ep3>;
++			};
++		};
++	};
++};
++
++&csi2_20 {
++	status = "okay";
++
++	virtual,channel {
++		csi2_vc0 {
++			data,type = "ycbcr422";
++			receive,vc = <0>;
++		};
++		csi2_vc1 {
++			data,type = "ycbcr422";
++			receive,vc = <1>;
++		};
++		csi2_vc2 {
++			data,type = "ycbcr422";
++			receive,vc = <2>;
++		};
++		csi2_vc3 {
++			data,type = "ycbcr422";
++			receive,vc = <3>;
++		};
++	};
++
++	port {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		csi2_20_ep: endpoint {
++			clock-lanes = <0>;
++			data-lanes = <1 2>;
++			csi-rate = <300>;
++		};
++	};
++};
+-- 
+1.9.1
+