| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This commit changes following contents:
- Update IPL and Secure Monitor Rev1.0.14 rev2.
- Update optee_os Rev1.0.8.
Change-Id: Ibc16e31545b762451eb3704f817cd0d53fc1a50d
Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates u-boot version corresponding to BSP v3.5.3
for following items:
- Add workaround for PRR register of R-Car M3 WS1.1.
(Fix printing cpu info.)
- Fix USB2.0 ch2 found device for R-Car H3 WS2.0.
- Revert "armv8: Add ISB after cpacr_el1 update" for I/D cache ON.
Change-Id: I952aabfeec8b8518760494ba987f2cdd045b6f66
Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit upgrades Linux BSP to v3.5.3
and adds device tree file for M3 Salvator-XS board to salvator-x.conf.
Linux BSP to v3.5.3 updates following items:
Kernel core
- Add workaround for PRR register of R-Car M3 WS1.1.
(Fix printing cpu info.)
- Add device tree file for Salvator-XS board with R-Car M3.
- Fix R-Car M3 Salvator-X device tree file for MIX function
of Audio driver.
Power Management
- Mark the OPP to be used during system suspend.
- Enable CPUIdle function.
- Apply new CPUIdle parameters.
Audio driver
- Confirm this driver can resume with Suspend to RAM during capture.
- Avoid SSI_MODEx settings for SSI8.
- Clear DE bit only in PDMACHCR when it stops.
- Tidyup Audio-DMAC channel for DVC.
- Enable PCM RATE until 192000.
- Fix the setting of saved_rate during the resume process.
Display driver
- Fix the problem that the flicker may occur during rendering
by the application.
- Add brs option check for VGA connector.
- Add routing set for digital RGB previously.
DMA Engine driver
- Fix release resources after interrupt process.
Ethernet driver
- Add phy-reset-gpios.
This driver can work after Suspend to RAM with Salvator-XS board.
- Fix GIS_PTMF bit clearing in ravb_ptp_interrupt.
I2C driver
- Revert and fix about unnecessary function related to Suspend to RAM.
MSIOF driver
- Fix SPI division value setting of R-Car M3
based on hardware specification.
- Allow interrupts during msiof slave mode transfer wait.
- Revert and fix about unnecessary function related to Suspend to RAM.
RWDT driver
- Fix timeout count calculation.
SCIF/HSCIF driver
- Fix panic when serial console and DMA are enabled.
- Revert about unnecessary function related to Suspend to RAM.
SD/MMC driver
- Wait for CBSY instead of SCLKDIVEN.
- Add re-tuning condition.
- Add internal DMAC reset at startup.
- Add the driver strength setting.
eMMC HS400 mode can work with R-Car M3 WS1.1 on Salvator-XS board.
Thermal driver
- Fix to support thermal for both M3 WS1.0 and WS1.1.
Video Capture driver
- Fix resuming procedure.
- Fix first field detection control.
- Fix 720x480p transfer rate.
- Fix video standard selection register setting.
Change-Id: I3b0d6237c9d0c56a9f2870f1fde89ea215f163cd
Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
Carry patches to fix poky meta ppp build with 4.9 kernel
used in Yocto BSP v2.16. Fixes are in poky master branch
but have not yet been migrated to krogoth. Carry them in
a bbappend until that happens.
(From Poky rev: 81339d0113a9aafd4cce878f30071a3c1a8e2dcf
8d3a2726f6725977d83dc71a5cd08ba9a062001b)
Change-Id: Ibb9a0569ceafe3758cf23fb18647a8795e6c8b92
Signed-off-by: Stephen Lawrence <stephen.lawrence@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit backport the following commit from poky upstream:
commit 0f25619268d4eb4e4a40cac7cdb40de5bca9ade1
Author: Jackie Huang <jackie.huang@windriver.com>
Date: Sun Oct 9 08:56:07 2016 +0800
net-tools: fix building with linux-4.8
Fix a build error when using the linux-4.8 headers that results
in:
In file included from
.../sysroots/qemuarm64/usr/include/linux/if_tunnel.h:6:0,
from iptunnel.c:39:
.../qemuarm64/usr/include/linux/ip.h:85:8: error: redefinition of
'struct iphdr'
struct iphdr {
^~~~~
In file included from iptunnel.c:29:0:
.../qemuarm64/usr/include/netinet/ip.h:44:8: note: originally
defined here
struct iphdr
^~~~~
(From OE-Core rev: 94d15885c516e3bfee4fb68dfb568f4da6904052)
Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com>
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this fix, net-tools can not be compile with Linux kernel 4.8
and 4.9.
Change-Id: Iea47634822f471f5032bd7822f51735add209d91
Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit configures weston to use the Genivi Compositor components
ivi-shell and ivi-extension rather than the default desktop-shell.
Default status is disabled.
To enable ivi-shell and ivi-extension,
please uncomment the following line in local.conf:
DISTRO_FEATURES_append = " ivi-shell"
Change-Id: Ia6aa51175c83bf4b9f3e887cd114b3755c1e4e09
Signed-off-by: Stephen Lawrence <stephen.lawrence@renesas.com>
Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
installed
The poky systemd class has a do_install() postfunc
rm_sysvinit_initddir() that deletes the /etc/init.d directory
of a package if the systemd system unit directory contains some files.
gles-user-module supports both systemd and
sysV but uses /etc/init.d in both cases as the location
of the required script rc.pvr.
In the case when systemd only is enabled,
the class deletes the init.d directory and the file.
Until the script is converted to a service file workaround the issue
by moving the install location of rc.pvr when systemd alone is used.
(cherry picked with edits from commit 50b03a9d6cc674144f42a656b43d3e3f2805661c)
Change-Id: I8b29d610d6465bc8a786ff330f896832824f0932
Signed-off-by: Stephen Lawrence <stephen.lawrence@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit is to add judge state for ULCB.
If machine is ulcb, "RCAR_GEN3_ULCB=1" will be added to compile option.
Change-Id: Ia05f33a4362c4a7a302c8c0fc5785415f27b15b5
Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit addes "ulcb" into MACHINEOVERRIDES.
"ulcb" contains h3ulcb and m3ulcb.
It will help the implementation in the future
become easier to maintain for ULCB group.
Change-Id: I3c5d66f1e36e85f07d96a74f566fc1ffd5a76ee6
Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
Because ULCB is not mounted VIN,
they will use /dev/media0 for v4l2-renderer.
Change-Id: Idbd40a5745c8f109455c57f77bb605c9f2964d78
Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies md5sum value in copyscript and libraries versions
in cms-user-module corresponding to new CMS packages.
New packages will update following items:
BCM
- Performance improvement.
DGC
- BCM function FB.
- Add peak/apl/bottom/midluma to read register.
- Rounding bug that decreases by 1/255 of LUT data by levelmap.
- Drop 0-15,236-255 frequency of 64-histogram at 16-235 signal.
- The value of each bin becomes x4 by histogram 64-256 interpolation.
- S curve is generated in the range of 16-235 table in 16-235 signal.
Change-Id: Iffcd777d08e26d53c4dee750ef78ba2b639e141a
Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit will update SRCREV of EthernetAVB components for
following changes:
avb-mse
- Update version to v0.5.
- Add avb-mch in DEPENDS.
- Add compile options.
- Modify mapping of ALSA/V4L2 device names.
- Fix some problems.
avb-mch
- Update version to v0.3.
- Add main functions.
avb-streaming
- Update version to v2.7.0.
- Fix minor defect.
avb-applications
- Update version to v2.7.0.
- Change URL scheme of git submodule jdksavdecc-c.
LIC_FILES_CHKSUM are also updated kernel-module-avb-mse and
kernel-module-avb-mch due to change of year in Copyright.
Change-Id: I80707a1602603696c592fb2c181de2384ddb7ebc
Signed-off-by: Masaru Nagai <masaru.nagai.vx@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies SRCREV of open-avb for some fixes of gptp.
Change-Id: I7c7cb9751f13efa60dde9679351b2cc2ba51182f
Signed-off-by: Masaru Nagai <masaru.nagai.vx@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates md5 value for ADSP packages
to latest release for Linux H3 beta (Extension Plugin).
- [Extension] Multiplicity/ADMAC/Connectivity
Change-Id: Ie9855c3f709770a828547aed3cb0809189722ee2
Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies md5 values of Video packages
corresponding to Linux H3 beta release (ver.3.0.8)
Change-Id: If1538495d60d7fb9c01c6eb1cc6004cb45a88969
Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates md5 value for Audio packages
to latest release for Linux H3 beta.
Change-Id: Id9d5c948442fb0df9804fbed6999ad6c02d5a9e7
Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit will modify gstreamer recipes for following fixes:
gst-omx
- Fix the problem of SIGSEGV error after resolution error
from OMX video decoder.
- Add timestamp information for buffer contain codec data
of omxh264enc for improving timestamp information of qtmux.
- Improve that H.264 encoding of Level 1 which is out of standard.
gst-pluigns-good
- Fix the problem of v4l2src userptr mode with gst-launch -e.
- Improve timestamp and offset of v4l2src
for buffer of NV12/NV16 multi plane.
- Add "--enable-ignore-fps-of-video-standard" configure option.
gst-plugins-bad
- Add the opaque region hint on non-alpha video surface
to eliminate unnecessary composition.
Change-Id: Iad10408202bb5166b1bf0d3c83c908344bd4542b
Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SRCREV for VSP2 driver to fix year of copyright.
Change-Id: Id052a60f1853948fbf7a1ecf010300bdfe65f535
Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SRCREV of VSPM driver and interface
for following changes.
VSPM driver
- Modify control clocks method.
- Support suspend and resume in operation.
VSPM libraries
- Support suspend and resume in operation.
Change-Id: Id1f71edc7ac4e1e2c9f8be1ff17165893587c956
Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SRCREV for Memory Manager driver to v0.12
to apply following changes:
- Add IPMMU-VC0 setting for H3 WS2.0.
- Add UTLB for FCP-VB (VSPB) as PMB entry on H3 WS1.x and M3.
- Revert UTLB for FCP-VI (VSPI) as PMB entry on H3 WS2.0.
- Change the translation policy in Lossy area on H3 WS2.0.
Change-Id: I1853ee9fa6d25632f38ccb3dc3c44e5996356ba1
Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit changes the package configuration from previous one
in order to support both H3 WS1.x and WS2.0.
Change-Id: I341155c6acc11658f570743e7135250960fb71c7
Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This patch updates SRCREV of weston for following fixes:
- Backporting: compositor: set the opaque
region for some views with transform.
- v4l2-renderer: clear dmabuf fd
when failed to attach buffer in backend.
- vsp2-renderer: fallback to gl-renderer to draw image flipped.
- vsp2-renderer: unify setting value for scaler enable flag to 0.
Change-Id: I5ef7d8c94173ff524d819486c6865d9c49ccf443
Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SRCREV of QoS for following fixes:
QoS Driver
- Fix year of Copyright
- Fix number of emetents to load
QoS Libraries
- Fix return val
- Fix FD close
Change-Id: Idd88c0240df3023ef29865f6e65830d09acbf602
Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
New ICCOM packages have been released.
This patch updates MD5 values for ICCOM packages
from v0.8.0 to v0.9.0.
Change-Id: I2445b12a27234023fa7084fe9f67fff963bb708a
Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit changes following contents:
- Update IPL and Secure Monitor Rev1.0.13 rev2.
- Update optee_os Rev1.0.7 rev2.
Change-Id: I0feeaad39dc13c79b7a2f2b8faaac4955413dcff
Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This patch upgrade BSP v3.5.0 -> v3.5.2.
[v3.5.2]
- Fix Ethernet driver and could turn on I/D cache.
Change-Id: Ic90b59ea4db549248b263eedd4fd40c865f74408
Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates version of Linux BSP v3.5.1 -> v3.5.2
to fix following issues:
[v3.5.2]
- Display driver [H/W Restriction No.54]
+ In R-Car H3 WS1.x, distortion appears on the screen,
when IPMMU is enabled.
But this problem is fixed with R-Car H3 WS2.0.
- Video Capture driver
+ Fix remove procedure.
- Add board Salvator-XS and H3 WS 2.0 support.
It also modifies the linux-renesas_4.9.bb to change the way common files
are included.
There is no difference in kernel config files of Salvator-X, H3ULCB and
M3ULCB so far.
Hence, we only need to install one file to avoid confusion.
Change-Id: I145e0a7696f97fe1841a8a213c51c5685ada0290
Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
Renesas BSP v3.5.1 (kernel v4.9 stable)
[Environment]
poky: yocto-2.1.2 (cca8dd15c8096626052f6d8d25ff1e9a606104a3)
meta-openembedded: 55c8a76da5dc099a7bc3838495c672140cedb78e
meta-linaro: 2f51d38048599d9878f149d6d15539fb97603f8f
[Information]
- U-boot: Changed load address from H'49000000 to H'50000000
- XDG_RUNTIME_DIR has been changed from "/run/user/root" to "/run/user/0"
- Change location of include directory, which stores common user header
files, to $(INCSHARED)
- In BSP Only, core-image-weston is not supported even though
local-wayland.conf is provided.
- Please set Salvator-x SW7 Pin-1. In after Yocto BSP v2.12.0, it is
necessary to enable BKUP_TRG signal for Suspend to RAM.
- The dtb filename was changed in R-Car H3. Only
"Image-r8a7795-es1-salvator-x.dtb" is supported in this version.
Please use "Image-r8a7795-es1-salvator-x.dtb" It supports R-Car H3
WS1.0 and WS1.1.
- Please update your local.conf and bblayers.conf corresponding to Yocto
v2.16.0 package. You can refer to meta-rcargen3/docs/sample/conf/ for
updated contents.
- You have to re-compile out-of-recipe software like user application by
v2.16.0 SDK toolchains.
- In some boards, the resuming from System Suspend to RAM may cause
unstable operation or failed to resume.
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
Thao Nguyen
Stephen Lawrence
Yusuke Goda
Masaru Nagai
Takamitsu Honda