From 3613b2780a6b5d5d70ea6802be5060a8214cbdb5 Mon Sep 17 00:00:00 2001 From: Takamitsu Honda Date: Fri, 27 Jan 2017 11:47:06 +0900 Subject: First commit. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Renesas BSP v3.5.1 (kernel v4.9 stable) [Environment] poky: yocto-2.1.2 (cca8dd15c8096626052f6d8d25ff1e9a606104a3) meta-openembedded: 55c8a76da5dc099a7bc3838495c672140cedb78e meta-linaro: 2f51d38048599d9878f149d6d15539fb97603f8f [Information] - U-boot: Changed load address from H'49000000 to H'50000000 - XDG_RUNTIME_DIR has been changed from "/run/user/root" to "/run/user/0" - Change location of include directory, which stores common user header files, to $(INCSHARED) - In BSP Only, core-image-weston is not supported even though local-wayland.conf is provided. - Please set Salvator-x SW7 Pin-1. In after Yocto BSP v2.12.0, it is 　necessary to enable BKUP_TRG signal for Suspend to RAM. - The dtb filename was changed in R-Car H3. Only "Image-r8a7795-es1-salvator-x.dtb" is supported in this version. Please use "Image-r8a7795-es1-salvator-x.dtb" It supports R-Car H3 WS1.0 and WS1.1. - Please update your local.conf and bblayers.conf corresponding to Yocto v2.16.0 package. You can refer to meta-rcargen3/docs/sample/conf/ for updated contents. - You have to re-compile out-of-recipe software like user application by v2.16.0 SDK toolchains. - In some boards, the resuming from System Suspend to RAM may cause unstable operation or failed to resume. Signed-off-by: Takamitsu Honda --- COPYING.MIT | 17 + MAINTAINERS | 28 + README | 25 + meta-rcar-gen3/COPYING.MIT | 17 + meta-rcar-gen3/README | 124 + meta-rcar-gen3/README.proprietary | 133 + meta-rcar-gen3/conf/layer.conf | 10 + meta-rcar-gen3/conf/machine/h3ulcb.conf | 38 + meta-rcar-gen3/conf/machine/include/r8a7795.inc | 3 + meta-rcar-gen3/conf/machine/include/r8a7796.inc | 3 + .../machine/include/tune-cortexa57-cortexa53.inc | 18 + .../conf/machine/include/tune-cortexa57.inc | 18 + meta-rcar-gen3/conf/machine/m3ulcb.conf | 38 + meta-rcar-gen3/conf/machine/salvator-x.conf | 48 + .../conf/h3ulcb/linaro-gcc/bsp/bblayers.conf | 16 + .../conf/h3ulcb/linaro-gcc/bsp/local-wayland.conf | 271 + .../sample/conf/h3ulcb/linaro-gcc/bsp/local.conf | 262 + .../conf/h3ulcb/linaro-gcc/gfx-only/bblayers.conf | 16 + .../h3ulcb/linaro-gcc/gfx-only/local-wayland.conf | 283 + .../conf/h3ulcb/linaro-gcc/mmp/bblayers.conf | 16 + .../conf/h3ulcb/linaro-gcc/mmp/local-wayland.conf | 372 ++ .../sample/conf/h3ulcb/poky-gcc/bsp/bblayers.conf | 15 + .../conf/h3ulcb/poky-gcc/bsp/local-wayland.conf | 264 + .../sample/conf/h3ulcb/poky-gcc/bsp/local.conf | 255 + .../conf/m3ulcb/linaro-gcc/bsp/bblayers.conf | 16 + .../conf/m3ulcb/linaro-gcc/bsp/local-wayland.conf | 271 + .../sample/conf/m3ulcb/linaro-gcc/bsp/local.conf | 262 + .../conf/m3ulcb/linaro-gcc/gfx-only/bblayers.conf | 16 + .../m3ulcb/linaro-gcc/gfx-only/local-wayland.conf | 283 + .../conf/m3ulcb/linaro-gcc/mmp/bblayers.conf | 16 + .../conf/m3ulcb/linaro-gcc/mmp/local-wayland.conf | 372 ++ .../sample/conf/m3ulcb/poky-gcc/bsp/bblayers.conf | 15 + .../conf/m3ulcb/poky-gcc/bsp/local-wayland.conf | 264 + .../sample/conf/m3ulcb/poky-gcc/bsp/local.conf | 255 + .../conf/salvator-x/linaro-gcc/bsp/bblayers.conf | 16 + .../salvator-x/linaro-gcc/bsp/local-wayland.conf | 274 + .../conf/salvator-x/linaro-gcc/bsp/local.conf | 265 + .../salvator-x/linaro-gcc/gfx-only/bblayers.conf | 16 + .../linaro-gcc/gfx-only/local-wayland.conf | 286 + .../conf/salvator-x/linaro-gcc/mmp/bblayers.conf | 16 + .../salvator-x/linaro-gcc/mmp/local-wayland.conf | 375 ++ .../conf/salvator-x/poky-gcc/bsp/bblayers.conf | 15 + .../salvator-x/poky-gcc/bsp/local-wayland.conf | 267 + .../sample/conf/salvator-x/poky-gcc/bsp/local.conf | 258 + .../copyscript/copy_evaproprietary_softwares.sh | 1345 +++++ .../copyscript/copy_proprietary_softwares.sh | 1330 +++++ meta-rcar-gen3/docs/sample/copyscript/md5list.txt | 54 + ...3-add-readme-for-building-with-Linaro-Gcc.patch | 151 + meta-rcar-gen3/include/adsp-control.inc | 2 + meta-rcar-gen3/include/avb-control.inc | 2 + meta-rcar-gen3/include/cms-control.inc | 18 + meta-rcar-gen3/include/dtv-dvd-control.inc | 5 + meta-rcar-gen3/include/gles-control.inc | 3 + meta-rcar-gen3/include/iccom-control.inc | 2 + meta-rcar-gen3/include/multimedia-control.inc | 9 + meta-rcar-gen3/include/omx-control.inc | 129 + .../include/rcar-gen3-modules-common.inc | 8 + .../arm-trusted-firmware_git.bb | 55 + .../recipes-bsp/optee/optee-client/optee.service | 11 + .../recipes-bsp/optee/optee-client_git.bb | 58 + meta-rcar-gen3/recipes-bsp/optee/optee-os_git.bb | 67 + .../recipes-bsp/qos/qosif-tp-user-module.bb | 36 + .../recipes-bsp/qos/qosif-user-module.bb | 48 + meta-rcar-gen3/recipes-bsp/qos/qosif.inc | 15 + .../recipes-bsp/u-boot/u-boot_2015.04.bb | 27 + .../iccom-module/iccom-tp-user-module.bb | 52 + .../iccom-module/iccom-user-module.bb | 40 + .../iccom-module/iccom-user-module.inc | 9 + .../images/core-image-minimal.bbappend | 1 + .../nativesdk-packagegroup-sdk-host.bbappend | 4 + .../recipes-core/systemd/systemd_%.bbappend | 1 + .../recipes-graphics/cogl/cogl-1.0_1.%.bbappend | 4 + .../drm/libdrm/fix_O_CLOEXEC_undeclared.patch | 24 + .../recipes-graphics/drm/libdrm/installtests.patch | 15 + .../recipes-graphics/drm/libdrm_2.4.68.bb | 45 + .../gles-module/gles-user-module.bb | 126 + ...clude-eglmesaext.h-to-avoid-compile-error.patch | 25 + .../gles-user-module/change-shell.patch | 8 + .../gles-module/gles-user-module/rc.pvr.service | 11 + .../images/core-image-renesas-base.inc | 67 + .../images/core-image-renesas-mmp-base.inc | 96 + .../images/core-image-weston-sdk.bb | 15 + .../images/core-image-weston.bbappend | 2 + .../recipes-graphics/images/core-image-weston.inc | 42 + .../recipes-graphics/mesa/mesa-dummy.inc | 0 .../recipes-graphics/mesa/mesa-wayland.inc | 36 + .../recipes-graphics/mesa/mesa_11.%.bbappend | 10 + meta-rcar-gen3/recipes-graphics/wayland/libgbm.bb | 35 + ...ics-need-to-fake-new-touches-on-TRIPLETAP.patch | 72 + .../recipes-graphics/wayland/libinput_1.4.1.bb | 23 + .../recipes-graphics/wayland/wayland-kms_1.6.0.bb | 25 + .../wayland/wayland-protocols_1.7.bb | 20 + .../wayland/wayland-protocols_1.7.bbappend | 10 + ...0001-scanner-Use-unit32_t-instead-of-uint.patch | 30 + .../recipes-graphics/wayland/wayland_1.11.0.bb | 43 + .../recipes-graphics/wayland/weston-init.bbappend | 30 + .../recipes-graphics/wayland/weston-init/init | 53 + .../wayland/weston-init/weston-start | 74 + .../wayland/weston-init/weston.service | 11 + meta-rcar-gen3/recipes-graphics/wayland/weston.inc | 36 + ...1-configure.ac-Fix-wayland-protocols-path.patch | 34 + .../wayland/weston/0001-make-error-portable.patch | 80 + .../0001-shared-include-stdint.h-for-int32_t.patch | 28 + ...ch-Provide-a-default-version-that-doesn-t.patch | 173 + ...eston-launch-exit-for-unrecognized-option.patch | 33 + .../recipes-graphics/wayland/weston/weston.desktop | 9 + .../recipes-graphics/wayland/weston/weston.ini | 2 + .../recipes-graphics/wayland/weston/weston.png | Bin 0 -> 2383 bytes .../wayland/weston/weston_v4l2.ini | 6 + .../wayland/weston/xwayland.weston-start | 7 + .../recipes-graphics/wayland/weston_1.11.0.bb | 117 + .../wayland/weston_1.11.0.bbappend | 44 + .../kernel-module-xtensa-hifi.bb | 32 + .../kernel-module-avb/kernel-module-avb-mch.bb | 20 + .../kernel-module-avb/kernel-module-avb-mse.bb | 38 + .../kernel-module-avb-streaming.bb | 36 + .../kernel-module-dtv/kernel-module-scu-src.bb | 55 + .../kernel-module-dtv/kernel-module-ssp.bb | 55 + .../kernel-module-dtv/kernel-module-tddmac.bb | 55 + .../kernel-module-dtv/kernel-module-tsif.bb | 54 + .../kernel-module-gles/kernel-module-gles.bb | 55 + .../kernel-module-iccom-hwspinlock-sample.bb | 32 + .../kernel-module-iccom-mfis.bb | 35 + .../kernel-module-mmngr/kernel-module-mmngr.bb | 70 + .../kernel-module-mmngr/kernel-module-mmngrbuf.bb | 52 + .../kernel-module-mmngr/mmngr_drv.inc | 13 + .../kernel-module-qos/kernel-module-qos.bb | 59 + .../kernel-module-uvcs/kernel-module-uvcs-drv.bb | 63 + .../kernel-module-vsp2driver.bb | 59 + .../kernel-module-vspm/kernel-module-vspm.bb | 86 + .../kernel-module-vspmif/kernel-module-vspmif.bb | 64 + .../linux-libc-headers/linux-libc-headers_4.9.bb | 10 + .../linux/linux-renesas/h3ulcb/defconfig | 5695 ++++++++++++++++++++ .../linux/linux-renesas/h3ulcb/touch.cfg | 1 + .../linux/linux-renesas/h3ulcb/usb-video-class.cfg | 68 + .../linux/linux-renesas/m3ulcb/defconfig | 5695 ++++++++++++++++++++ .../linux/linux-renesas/m3ulcb/touch.cfg | 1 + .../linux/linux-renesas/m3ulcb/usb-video-class.cfg | 68 + .../linux/linux-renesas/salvator-x/defconfig | 5695 ++++++++++++++++++++ .../linux/linux-renesas/salvator-x/touch.cfg | 1 + .../linux-renesas/salvator-x/usb-video-class.cfg | 68 + .../recipes-kernel/linux/linux-renesas_4.9.bb | 23 + .../optee-linuxdriver/optee-linuxdriver_git.bb | 75 + .../adsp-module/adsp-fw-module.bb | 29 + .../adsp-module/adsp-if-module.bb | 58 + .../avb-applications/avb-applications.inc | 9 + .../avb-applications/avb-demoapps.bb | 119 + .../recipes-multimedia/avb-applications/avbtool.bb | 17 + .../cms-module/cms-user-module.bb | 74 + .../dtv-module/dtv-user-module.bb | 72 + .../dvd-module/dvd-user-module.bb | 62 + .../gstreamer/gstreamer1.0-omx_1.2.0.bbappend | 24 + .../gstvspfilter-h3ulcb_r8a7795.conf | 2 + .../gstvspfilter-m3ulcb_r8a7796.conf | 2 + .../gstvspfilter-salvator-x_r8a7795.conf | 2 + .../gstvspfilter-salvator-x_r8a7796.conf | 2 + .../gstreamer1.0-plugin-vspfilter_1.0.0.bb | 37 + .../gstreamer1.0-plugins-bad_1.6.3.bbappend | 28 + .../gstreamer1.0-plugins-good_1.6.3.bbappend | 29 + .../mmngr-module/mmngr-user-module.bb | 23 + .../recipes-multimedia/mmngr-module/mmngr_lib.inc | 18 + .../mmngr-module/mmngrbuf-user-module.bb | 23 + .../omx-module/deltask-omx-user-module.inc | 2 + .../recipes-multimedia/omx-module/libalacdla-l.bb | 61 + .../recipes-multimedia/omx-module/libflacdla-l.bb | 50 + .../omx-module/omx-user-module.bb | 449 ++ .../recipes-multimedia/open-avb/open-avb_git.bb | 66 + .../packagegroup-gstreamer1.0-plugins.bb | 85 + .../packagegroup-multimedia-kernel.bb | 31 + .../packagegroups/packagegroup-multimedia-libs.bb | 20 + .../vspmif-module/vspmif-tp-user-module.bb | 46 + .../vspmif-module/vspmif-user-module.bb | 49 + .../recipes-multimedia/vspmif-module/vspmif.inc | 15 + .../webp/libwebp/disabled_arm_neon.diff | 12 + .../recipes-multimedia/webp/libwebp_%.bbappend | 5 + 175 files changed, 30705 insertions(+) create mode 100644 COPYING.MIT create mode 100644 MAINTAINERS create mode 100644 README create mode 100644 meta-rcar-gen3/COPYING.MIT create mode 100644 meta-rcar-gen3/README create mode 100644 meta-rcar-gen3/README.proprietary create mode 100644 meta-rcar-gen3/conf/layer.conf create mode 100644 meta-rcar-gen3/conf/machine/h3ulcb.conf create mode 100644 meta-rcar-gen3/conf/machine/include/r8a7795.inc create mode 100644 meta-rcar-gen3/conf/machine/include/r8a7796.inc create mode 100644 meta-rcar-gen3/conf/machine/include/tune-cortexa57-cortexa53.inc create mode 100644 meta-rcar-gen3/conf/machine/include/tune-cortexa57.inc create mode 100644 meta-rcar-gen3/conf/machine/m3ulcb.conf create mode 100644 meta-rcar-gen3/conf/machine/salvator-x.conf create mode 100644 meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/bblayers.conf create mode 100644 meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local-wayland.conf create mode 100644 meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local.conf create mode 100644 meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/bblayers.conf create mode 100644 meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/local-wayland.conf create mode 100644 meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/bblayers.conf create mode 100644 meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/local-wayland.conf create mode 100644 meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/bblayers.conf create mode 100644 meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local-wayland.conf create mode 100644 meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local.conf create mode 100644 meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/bblayers.conf create mode 100644 meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local-wayland.conf create mode 100644 meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local.conf create mode 100644 meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/bblayers.conf create mode 100644 meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/local-wayland.conf create mode 100644 meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/bblayers.conf create mode 100644 meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/local-wayland.conf create mode 100644 meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/bblayers.conf create mode 100644 meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local-wayland.conf create mode 100644 meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local.conf create mode 100644 meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/bblayers.conf create mode 100644 meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local-wayland.conf create mode 100644 meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local.conf create mode 100644 meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/bblayers.conf create mode 100644 meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/local-wayland.conf create mode 100644 meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/bblayers.conf create mode 100644 meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/local-wayland.conf create mode 100644 meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/bblayers.conf create mode 100644 meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-wayland.conf create mode 100644 meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local.conf create mode 100755 meta-rcar-gen3/docs/sample/copyscript/copy_evaproprietary_softwares.sh create mode 100755 meta-rcar-gen3/docs/sample/copyscript/copy_proprietary_softwares.sh create mode 100644 meta-rcar-gen3/docs/sample/copyscript/md5list.txt create mode 100644 meta-rcar-gen3/docs/sample/patch/patch-for-linaro-gcc/0001-rcar-gen3-add-readme-for-building-with-Linaro-Gcc.patch create mode 100644 meta-rcar-gen3/include/adsp-control.inc create mode 100644 meta-rcar-gen3/include/avb-control.inc create mode 100644 meta-rcar-gen3/include/cms-control.inc create mode 100644 meta-rcar-gen3/include/dtv-dvd-control.inc create mode 100644 meta-rcar-gen3/include/gles-control.inc create mode 100644 meta-rcar-gen3/include/iccom-control.inc create mode 100644 meta-rcar-gen3/include/multimedia-control.inc create mode 100644 meta-rcar-gen3/include/omx-control.inc create mode 100644 meta-rcar-gen3/include/rcar-gen3-modules-common.inc create mode 100644 meta-rcar-gen3/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_git.bb create mode 100644 meta-rcar-gen3/recipes-bsp/optee/optee-client/optee.service create mode 100644 meta-rcar-gen3/recipes-bsp/optee/optee-client_git.bb create mode 100644 meta-rcar-gen3/recipes-bsp/optee/optee-os_git.bb create mode 100644 meta-rcar-gen3/recipes-bsp/qos/qosif-tp-user-module.bb create mode 100644 meta-rcar-gen3/recipes-bsp/qos/qosif-user-module.bb create mode 100644 meta-rcar-gen3/recipes-bsp/qos/qosif.inc create mode 100644 meta-rcar-gen3/recipes-bsp/u-boot/u-boot_2015.04.bb create mode 100644 meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-tp-user-module.bb create mode 100644 meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-user-module.bb create mode 100644 meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-user-module.inc create mode 100644 meta-rcar-gen3/recipes-core/images/core-image-minimal.bbappend create mode 100644 meta-rcar-gen3/recipes-core/packagegroups/nativesdk-packagegroup-sdk-host.bbappend create mode 100644 meta-rcar-gen3/recipes-core/systemd/systemd_%.bbappend create mode 100644 meta-rcar-gen3/recipes-graphics/cogl/cogl-1.0_1.%.bbappend create mode 100644 meta-rcar-gen3/recipes-graphics/drm/libdrm/fix_O_CLOEXEC_undeclared.patch create mode 100644 meta-rcar-gen3/recipes-graphics/drm/libdrm/installtests.patch create mode 100644 meta-rcar-gen3/recipes-graphics/drm/libdrm_2.4.68.bb create mode 100644 meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module.bb create mode 100644 meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/0001-EGL-eglext.h-Include-eglmesaext.h-to-avoid-compile-error.patch create mode 100644 meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/change-shell.patch create mode 100644 meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/rc.pvr.service create mode 100644 meta-rcar-gen3/recipes-graphics/images/core-image-renesas-base.inc create mode 100644 meta-rcar-gen3/recipes-graphics/images/core-image-renesas-mmp-base.inc create mode 100644 meta-rcar-gen3/recipes-graphics/images/core-image-weston-sdk.bb create mode 100644 meta-rcar-gen3/recipes-graphics/images/core-image-weston.bbappend create mode 100644 meta-rcar-gen3/recipes-graphics/images/core-image-weston.inc create mode 100644 meta-rcar-gen3/recipes-graphics/mesa/mesa-dummy.inc create mode 100644 meta-rcar-gen3/recipes-graphics/mesa/mesa-wayland.inc create mode 100644 meta-rcar-gen3/recipes-graphics/mesa/mesa_11.%.bbappend create mode 100644 meta-rcar-gen3/recipes-graphics/wayland/libgbm.bb create mode 100644 meta-rcar-gen3/recipes-graphics/wayland/libinput/touchpad-serial-synaptics-need-to-fake-new-touches-on-TRIPLETAP.patch create mode 100644 meta-rcar-gen3/recipes-graphics/wayland/libinput_1.4.1.bb create mode 100644 meta-rcar-gen3/recipes-graphics/wayland/wayland-kms_1.6.0.bb create mode 100644 meta-rcar-gen3/recipes-graphics/wayland/wayland-protocols_1.7.bb create mode 100644 meta-rcar-gen3/recipes-graphics/wayland/wayland-protocols_1.7.bbappend create mode 100644 meta-rcar-gen3/recipes-graphics/wayland/wayland/0001-scanner-Use-unit32_t-instead-of-uint.patch create mode 100644 meta-rcar-gen3/recipes-graphics/wayland/wayland_1.11.0.bb create mode 100644 meta-rcar-gen3/recipes-graphics/wayland/weston-init.bbappend create mode 100644 meta-rcar-gen3/recipes-graphics/wayland/weston-init/init create mode 100755 meta-rcar-gen3/recipes-graphics/wayland/weston-init/weston-start create mode 100644 meta-rcar-gen3/recipes-graphics/wayland/weston-init/weston.service create mode 100644 meta-rcar-gen3/recipes-graphics/wayland/weston.inc create mode 100644 meta-rcar-gen3/recipes-graphics/wayland/weston/0001-configure.ac-Fix-wayland-protocols-path.patch create mode 100644 meta-rcar-gen3/recipes-graphics/wayland/weston/0001-make-error-portable.patch create mode 100644 meta-rcar-gen3/recipes-graphics/wayland/weston/0001-shared-include-stdint.h-for-int32_t.patch create mode 100644 meta-rcar-gen3/recipes-graphics/wayland/weston/0001-weston-launch-Provide-a-default-version-that-doesn-t.patch create mode 100644 meta-rcar-gen3/recipes-graphics/wayland/weston/make-weston-launch-exit-for-unrecognized-option.patch create mode 100644 meta-rcar-gen3/recipes-graphics/wayland/weston/weston.desktop create mode 100644 meta-rcar-gen3/recipes-graphics/wayland/weston/weston.ini create mode 100644 meta-rcar-gen3/recipes-graphics/wayland/weston/weston.png create mode 100644 meta-rcar-gen3/recipes-graphics/wayland/weston/weston_v4l2.ini create mode 100644 meta-rcar-gen3/recipes-graphics/wayland/weston/xwayland.weston-start create mode 100644 meta-rcar-gen3/recipes-graphics/wayland/weston_1.11.0.bb create mode 100644 meta-rcar-gen3/recipes-graphics/wayland/weston_1.11.0.bbappend create mode 100644 meta-rcar-gen3/recipes-kernel/kernel-module-adsp/kernel-module-xtensa-hifi.bb create mode 100644 meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-mch.bb create mode 100644 meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-mse.bb create mode 100644 meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-streaming.bb create mode 100644 meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-scu-src.bb create mode 100644 meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-ssp.bb create mode 100644 meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-tddmac.bb create mode 100644 meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-tsif.bb create mode 100644 meta-rcar-gen3/recipes-kernel/kernel-module-gles/kernel-module-gles.bb create mode 100644 meta-rcar-gen3/recipes-kernel/kernel-module-iccom/kernel-module-iccom-hwspinlock-sample.bb create mode 100644 meta-rcar-gen3/recipes-kernel/kernel-module-iccom/kernel-module-iccom-mfis.bb create mode 100644 meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/kernel-module-mmngr.bb create mode 100644 meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/kernel-module-mmngrbuf.bb create mode 100644 meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/mmngr_drv.inc create mode 100644 meta-rcar-gen3/recipes-kernel/kernel-module-qos/kernel-module-qos.bb create mode 100644 meta-rcar-gen3/recipes-kernel/kernel-module-uvcs/kernel-module-uvcs-drv.bb create mode 100644 meta-rcar-gen3/recipes-kernel/kernel-module-vsp2driver/kernel-module-vsp2driver.bb create mode 100644 meta-rcar-gen3/recipes-kernel/kernel-module-vspm/kernel-module-vspm.bb create mode 100644 meta-rcar-gen3/recipes-kernel/kernel-module-vspmif/kernel-module-vspmif.bb create mode 100644 meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers_4.9.bb create mode 100644 meta-rcar-gen3/recipes-kernel/linux/linux-renesas/h3ulcb/defconfig create mode 100644 meta-rcar-gen3/recipes-kernel/linux/linux-renesas/h3ulcb/touch.cfg create mode 100644 meta-rcar-gen3/recipes-kernel/linux/linux-renesas/h3ulcb/usb-video-class.cfg create mode 100644 meta-rcar-gen3/recipes-kernel/linux/linux-renesas/m3ulcb/defconfig create mode 100644 meta-rcar-gen3/recipes-kernel/linux/linux-renesas/m3ulcb/touch.cfg create mode 100644 meta-rcar-gen3/recipes-kernel/linux/linux-renesas/m3ulcb/usb-video-class.cfg create mode 100644 meta-rcar-gen3/recipes-kernel/linux/linux-renesas/salvator-x/defconfig create mode 100644 meta-rcar-gen3/recipes-kernel/linux/linux-renesas/salvator-x/touch.cfg create mode 100644 meta-rcar-gen3/recipes-kernel/linux/linux-renesas/salvator-x/usb-video-class.cfg create mode 100644 meta-rcar-gen3/recipes-kernel/linux/linux-renesas_4.9.bb create mode 100644 meta-rcar-gen3/recipes-kernel/optee-linuxdriver/optee-linuxdriver_git.bb create mode 100644 meta-rcar-gen3/recipes-multimedia/adsp-module/adsp-fw-module.bb create mode 100644 meta-rcar-gen3/recipes-multimedia/adsp-module/adsp-if-module.bb create mode 100644 meta-rcar-gen3/recipes-multimedia/avb-applications/avb-applications.inc create mode 100644 meta-rcar-gen3/recipes-multimedia/avb-applications/avb-demoapps.bb create mode 100644 meta-rcar-gen3/recipes-multimedia/avb-applications/avbtool.bb create mode 100644 meta-rcar-gen3/recipes-multimedia/cms-module/cms-user-module.bb create mode 100644 meta-rcar-gen3/recipes-multimedia/dtv-module/dtv-user-module.bb create mode 100644 meta-rcar-gen3/recipes-multimedia/dvd-module/dvd-user-module.bb create mode 100644 meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-omx_1.2.0.bbappend create mode 100644 meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-h3ulcb_r8a7795.conf create mode 100644 meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-m3ulcb_r8a7796.conf create mode 100644 meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-salvator-x_r8a7795.conf create mode 100644 meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-salvator-x_r8a7796.conf create mode 100644 meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter_1.0.0.bb create mode 100644 meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_1.6.3.bbappend create mode 100644 meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-good_1.6.3.bbappend create mode 100644 meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngr-user-module.bb create mode 100644 meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngr_lib.inc create mode 100644 meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngrbuf-user-module.bb create mode 100644 meta-rcar-gen3/recipes-multimedia/omx-module/deltask-omx-user-module.inc create mode 100644 meta-rcar-gen3/recipes-multimedia/omx-module/libalacdla-l.bb create mode 100644 meta-rcar-gen3/recipes-multimedia/omx-module/libflacdla-l.bb create mode 100644 meta-rcar-gen3/recipes-multimedia/omx-module/omx-user-module.bb create mode 100644 meta-rcar-gen3/recipes-multimedia/open-avb/open-avb_git.bb create mode 100644 meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-gstreamer1.0-plugins.bb create mode 100644 meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-multimedia-kernel.bb create mode 100644 meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-multimedia-libs.bb create mode 100644 meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif-tp-user-module.bb create mode 100644 meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif-user-module.bb create mode 100644 meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif.inc create mode 100644 meta-rcar-gen3/recipes-multimedia/webp/libwebp/disabled_arm_neon.diff create mode 100644 meta-rcar-gen3/recipes-multimedia/webp/libwebp_%.bbappend diff --git a/COPYING.MIT b/COPYING.MIT new file mode 100644 index 0000000..fb950dc --- /dev/null +++ b/COPYING.MIT @@ -0,0 +1,17 @@ +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +THE SOFTWARE. diff --git a/MAINTAINERS b/MAINTAINERS new file mode 100644 index 0000000..4921617 --- /dev/null +++ b/MAINTAINERS @@ -0,0 +1,28 @@ +This file contains a list of BSP maintainers for the BSPs contained in +the meta-renesas repository. + +Descriptions of section entries: + + M: Mail patches to: FullName + F: Files and directories with wildcard patterns. + A trailing slash includes all files and subdirectory files. + F: meta-XXXXX/ all files in and below meta-XXXXX + F: meta-XXXXX/* all files in meta-XXXXX, but not below + One pattern per line. Multiple F: lines acceptable. + +Please keep this list in alphabetical order. + +Maintainers List (try to look for most precise areas first) + + ----------------------------------- +Renesas ARM SoCs R-Car Generation 3 +M: Takamitsu Honda +F: meta-rcar-gen3 + +Renesas ARM SoCs R-Car Generation 2 +M: Takamitsu Honda +F: meta-rcar-gen2 + +COMMON +M: Takamitsu Honda +F: common diff --git a/README b/README new file mode 100644 index 0000000..c073969 --- /dev/null +++ b/README @@ -0,0 +1,25 @@ +OpenEmbedded/Yocto BSP layer for Renesas Electronics's SoCs +========== +This layer provides support for Renesas Electronics's platforms for use with +OpenEmbedded and/or Yocto. + +Layer maintainer: Takamitsu Honda + +Supported Boards/Machines +========================= + +In addition, this also provides layer that provides support board that is used +SoCs that Renesas build. Layer and board that supports following: + + * meta-rcar-gen3 + - Renesas Electronics Corporation. Salvator-X (R8A7795/R8A7796) + - Renesas Electronics Corporation. R-Car Starter Kit premier(H3ULCB) (R8A7795) + - Renesas Electronics Corporation. R-Car Starter Kit pro(M3ULCB) (R8A7796) + +Please see README in the layer directory about the description of the board. + +Original BSP image +========================= +The meta-renesas layer provides original BSP image. The following + * core-image-x11 (H3ULCB, M3ULCB) + * core-image-weston diff --git a/meta-rcar-gen3/COPYING.MIT b/meta-rcar-gen3/COPYING.MIT new file mode 100644 index 0000000..89de354 --- /dev/null +++ b/meta-rcar-gen3/COPYING.MIT @@ -0,0 +1,17 @@ +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +THE SOFTWARE. diff --git a/meta-rcar-gen3/README b/meta-rcar-gen3/README new file mode 100644 index 0000000..dd87e65 --- /dev/null +++ b/meta-rcar-gen3/README @@ -0,0 +1,124 @@ +meta-rcar-gen3 +============== + +This layer provides that evaluation board is mounted ARM SoCs of Renesas +Electronics, called the R-Car Generation 3. Currently, this supports +board and the SoCs of the following: + - Board: Salvator-X / SoC: R8A7795 (R-Car H3), R8A7796 (R-Car M3) + - Board: R-Car Starter Kit premier(H3ULCB) / SoC: R8A7795 (R-Car H3) + - Board: R-Car Starter Kit pro(M3ULCB) / SoC: R8A7796 (R-Car M3) + +Patches +======= + +Please submit any patches for this layer to: takamitsu.honda.pv@renesas.com +Please see the MAINTAINERS file for more details. + +Dependencies +============ + +This layer depends on: + + URI: git://git.yoctoproject.org/poky + layers: meta, meta-yocto, meta-yocto-bsp + branch: krogoth + + URI: git://github.com/renesas-rcar/meta-renesas + layers: meta-rcar-gen3 + branch: krogoth + + URI: git://git.linaro.org/openembedded/meta-linaro.git + layers: meta-optee + branch: krogoth + + URI: git://git.openembedded.org/meta-openembedded + layers: meta-oe + branch: krogoth + +Build Instructions +================== + +The following instructions require a Poky installation (or equivalent). + +Initialize a build using the 'oe-init-build-env' script in Poky. e.g.: + + $ source poky/oe-init-build-env + +After that, initialized configure bblayers.conf by adding meta-rcar-gen3 layer. e.g.: + + BBLAYERS ?= " \ + /poky/meta \ + /poky/meta-yocto \ + /poky/meta-yocto-bsp \ + /meta-renesas/meta-rcar-gen3 \ + /meta-linaro/meta-optee \ + /meta-openembedded/meta-oe \ + " + +To build a specific target BSP, configure the associated machine in local.conf: + + MACHINE ??= "" + +Select the SOC + + For H3: r8a7795 + SOC_FAMILY = "r8a7795" + + For M3: r8a7796 + SOC_FAMILY = "r8a7796" + +Must change the package class to ipk files in local.conf: + + PACKAGE_CLASSES ?= "package_ipk" + +Configure for systemd init in local.conf: + + DISTRO_FEATURES_append = " systemd" + VIRTUAL-RUNTIME_init_manager = "systemd" + +Build the target file system image using bitbake: + + $ bitbake core-image-minimal + +After completing the images for the target machine will be available in the output +directory 'tmp/deploy/images/'. + +Images generated: + * Image (generic Linux Kernel binary image file) + * Image-.dtb (DTB for target machine) + * core-image-minimal-.tar.bz2 (rootfs tar+bzip2) + * core-image-minimal-.ext4 (rootfs ext4 format) + * core-image-minimal-.cpio.gz (rootfs cpio+gz format) + +Build Instructions for SDK +========================== +This may be changed in the near feature. These instructions are tentative. + +Should define the staticdev in SDK image feature for installing the static libs +to SDK in local.conf. + + SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +Use bitbake -c populate_sdk for generating the toolchain SDK: +For 64-bit target SDK (aarch64): + + $ bitbake core-image-minimal -c populate_sdk + +The SDK can be found in the output directory 'tmp/deploy/sdk' + * poky-glibc-x86_64-core-image-minimal-aarch64-toolchain-x.x.sh + +Usage of toolchain SDK: +Install the SDK to the default: /opt/poky/x.x +For 64-bit target SDK: + + $ sh poky-glibc-x86_64-core-image-minimal-aarch64-toolchain-x.x.sh + +For 64-bit application use environment script in /opt/poky/x.x + + $ source /opt/poky/x.x/environment-setup-aarch64-poky-linux + +ULCB Information +================ +Refer to the following for more information of ULCB: + + http://elinux.org/R-Car diff --git a/meta-rcar-gen3/README.proprietary b/meta-rcar-gen3/README.proprietary new file mode 100644 index 0000000..ac3a958 --- /dev/null +++ b/meta-rcar-gen3/README.proprietary @@ -0,0 +1,133 @@ +Proprietary libraries for meta-rcar-gen3 +======================================== + +The meta-rcar-gen3 layer of meta-renesas is supported Graphic GLES(GSX) libraries, +proprietary library of multimedia, and ICCOM software. +This README describes how to use these features and setting to local.conf. + +There are 2 main paths: + I/ Board configuration + II/ Build with GLES + III/ Build with Renesas multimedia libraries + +Please check section II to config for GLES. +Please check section III to enable Multimedia functions. + +If you would like to use Linux ICCOM driver and Linux ICCOM library, +please check section IV. + +However, to have a completed local.conf, +please also refer to Build Instruction in meta-renesas/meta-rcar-gen3/README. + +In addition, these libraries are not provided with recipes. If you would like to use, +you will need to get them from Renesas. + +I/ Board configuration +================== +* Add this line to local.conf + For Salvator-X board + MACHINE = "salvator-x" + For R-Car Starter Kit Premier(H3ULCB) board + MACHINE = "h3ulcb" + For R-Car Starter Kit Pro(M3ULCB) board + MACHINE = "m3ulcb" + +* Set SOC family name: + For H3: r8a7795 + SOC_FAMILY = "r8a7795" + For M3: r8a7796 + SOC_FAMILY = "r8a7796" + +II/ Build with GLES +================== + * For wayland with GSX + + 1. Please copy proprietary libraries to the directory of recipes. + 2. Set local.conf the following. + + # Enable Gfx Pkgs + MACHINE_FEATURES_append = " gsx" + MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2" + + # for Wayland/Weston + DISTRO_FEATURES_append = " pam" + PREFERRED_PROVIDER_virtual/libgles1 = "" + PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" + PREFERRED_PROVIDER_virtual/egl = "gles-user-module" + PREFERRED_PROVIDER_virtual/libgl = "" + PREFERRED_PROVIDER_virtual/mesa = "" + PREFERRED_PROVIDER_libgbm = "libgbm" + PREFERRED_PROVIDER_libgbm-dev = "libgbm" + BBMASK = "mesa-gl" + + 3. Run 'bitbake core-image-weston' + +III/ Build with Renesas multimedia libraries +============================================ + Multimedia portions depend on GLES portions. + + A/ Configuration for Multimedia features + 1. Please copy proprietary libraries to the directory of recipes. + 2. Please set local.conf the following. + + # Enable multimedia features. + # This provides package group of plug-ins of the GStreamer, multimedia + # libraries and kernel drivers. + + MACHINE_FEATURES_append = " multimedia" + + B/ Configuration for optional codecs and middleware + 1. Please copy proprietary libraries to the directory of recipes. + 2. Add features to DISTRO_FEATURES_append to local.conf + # Additional configuration in OMX module + " h263dec_lib" - for OMX Media Component H263 Decoder Library + " h264dec_lib" - for OMX Media Component H264 Decoder Library + " h264enc_lib" - for OMX Media Component H.264 Encoder Library + " h265dec_lib" - for OMX Media Component H265 Decoder Library + " mpeg2dec_lib" - for OMX Media Component MPEG2 Decoder Library + " mpeg4dec_lib" - for OMX Media Component MPEG4 Decoder Library + " vc1dec_lib" - for OMX Media Component VC-1 Decoder Library + " divxdec_lib" - for OMX Media Component DivX Decoder Library + " rvdec_lib" - for OMX Media Component RealVideo Decoder Library + " alacdec_lib" - for OMX Media Component ALAC Decoder Library + " flacdec_lib" - for OMX Media Component FLAC Decoder Library + " aaclcdec_lib" - for OMX Media Component AAC-LC Decoder Library + " aaclcdec_mdw" - for AAC-LC 2ch Decoder Middleware for Linux + " aacpv2dec_lib" - for OMX Media Component aacPlus V2 Decoder Library + " aacpv2dec_mdw" - for aacPlus V2 Decoder Middleware for Linux + " mp3dec_lib" - for OMX Media Component MP3 Decoder Library + " mp3dec_mdw" - for MP3 Decoder Middleware for Linux + " wmadec_lib" - for OMX Media Component WMA Standard Decoder Library + " wmadec_mdw" - for WMA Standard Decoder Middleware for Linux + " dddec_lib" - for OMX Media Component Dolby(R) Digital Decoder Library + " dddec_mdw" - for Dolby(R) Digital Decoder Middleware for Linux + " aaclcenc_lib" - for OMX Media Component AAC-LC Encoder Library + " aaclcenc_mdw" - for AAC-LC Encoder Middleware for Linux + " cmsbcm" - for CMS Basic Color Management Middleware for Linux + " cmsblc" - for CMS CMM3 Backlight Control Middleware for Linux + " cmsdgc" - for CMS VSP2 Dynamic Gamma Correction Middleware for Linux + " dtv" - for ISDB-T DTV Software Package for Linux + " dvd" - for DVD Core-Middleware for Linux + " adsp" - for ADSP driver, ADSP interface and ADSP framework for Linux + " avb" - for AVB Software Package for Linux + + Ex: + DISTRO_FEATURES_append = " h264dec_lib h265dec_lib mpeg2dec_lib aaclcdec_lib aaclcdec_mdw" + + C/ Configuration for test packages + Must ensure that Multimedia features have been enabled. + (Please refer to III/A to enable Multimedia.) + Please add feature to DISTRO_FEATURES_append to local.conf. + # Configuration for multimedia test package + + DISTRO_FEATURES_append = " mm-test" + +IV/ Enable Linux ICCOM driver and Linux ICCOM library +===================================================== + For Linux ICCOM driver and Linux ICCOM library + + 1. Please copy proprietary libraries to the directory of recipes. + 2. Please set local.conf the following. + + DISTRO_FEATURES_append = " iccom" +END. diff --git a/meta-rcar-gen3/conf/layer.conf b/meta-rcar-gen3/conf/layer.conf new file mode 100644 index 0000000..7c09bc3 --- /dev/null +++ b/meta-rcar-gen3/conf/layer.conf @@ -0,0 +1,10 @@ +# We have a conf and classes directory, add to BBPATH +BBPATH .= ":${LAYERDIR}" + +# We have recipes-* directories, add to BBFILES +BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \ + ${LAYERDIR}/recipes-*/*/*.bbappend" + +BBFILE_COLLECTIONS += "rcar-gen3" +BBFILE_PATTERN_rcar-gen3 = "^${LAYERDIR}/" +BBFILE_PRIORITY_rcar-gen3 = "6" diff --git a/meta-rcar-gen3/conf/machine/h3ulcb.conf b/meta-rcar-gen3/conf/machine/h3ulcb.conf new file mode 100644 index 0000000..8ebc33a --- /dev/null +++ b/meta-rcar-gen3/conf/machine/h3ulcb.conf @@ -0,0 +1,38 @@ +#@TYPE: Machine +#@NAME: H3ULCB machine +#@DESCRIPTION: Machine configuration for running H3ULCB + +DEFAULTTUNE ?= "cortexa57-cortexa53" +require conf/machine/include/tune-cortexa57-cortexa53.inc +require conf/machine/include/${SOC_FAMILY}.inc + +# 32BIT package install (default is disable) +# This variables can be used only in multilib. +USE_32BIT_PKGS ?= "0" +USE_32BIT_WAYLAND ?= "0" +USE_32BIT_MMP ?= "0" + +MACHINE_FEATURES = "" + +KERNEL_IMAGETYPE = "Image" +IMAGE_FSTYPES = "tar.bz2 ext4 cpio.gz" + +SERIAL_CONSOLE = "115200 ttySC0" + +# Configuration for kernel +PREFERRED_PROVIDER_virtual/kernel = "linux-renesas" +KERNEL_DEVICETREE = "renesas/r8a7795-h3ulcb.dtb" + +# Configuration for ARM Trusted Firmware +EXTRA_IMAGEDEPENDS += " arm-trusted-firmware optee-os" + +# u-boot +PREFERRED_VERSION_u-boot = "v2015.04%" +EXTRA_IMAGEDEPENDS += " u-boot" +UBOOT_MACHINE = "h3ulcb_defconfig" + +# libdrm +PREFERRED_VERSION_libdrm = "2.4.68" + +# Add variable to Build Configuration in build log +BUILDCFG_VARS_append = " SOC_FAMILY" diff --git a/meta-rcar-gen3/conf/machine/include/r8a7795.inc b/meta-rcar-gen3/conf/machine/include/r8a7795.inc new file mode 100644 index 0000000..e2cc4ac --- /dev/null +++ b/meta-rcar-gen3/conf/machine/include/r8a7795.inc @@ -0,0 +1,3 @@ +SOC_FAMILY =. "rcar-gen3:" +require conf/machine/include/soc-family.inc +LINUXLIBCVERSION = "4.9" diff --git a/meta-rcar-gen3/conf/machine/include/r8a7796.inc b/meta-rcar-gen3/conf/machine/include/r8a7796.inc new file mode 100644 index 0000000..e2cc4ac --- /dev/null +++ b/meta-rcar-gen3/conf/machine/include/r8a7796.inc @@ -0,0 +1,3 @@ +SOC_FAMILY =. "rcar-gen3:" +require conf/machine/include/soc-family.inc +LINUXLIBCVERSION = "4.9" diff --git a/meta-rcar-gen3/conf/machine/include/tune-cortexa57-cortexa53.inc b/meta-rcar-gen3/conf/machine/include/tune-cortexa57-cortexa53.inc new file mode 100644 index 0000000..17f1f25 --- /dev/null +++ b/meta-rcar-gen3/conf/machine/include/tune-cortexa57-cortexa53.inc @@ -0,0 +1,18 @@ +DEFAULTTUNE ?= "cortexa57-cortexa53" +require conf/machine/include/arm/arch-armv8.inc + +TUNEVALID[cortexa57-cortexa53] = "Enable big.LITTLE Cortex-A57.Cortex-A53 specific processor optimizations" +TUNECONFLICTS[aarch64] = "armv4 armv5 armv6 armv7 armv7a" + +TUNE_CCARGS .= "${@bb.utils.contains("TUNE_FEATURES", "aarch64", " -march=armv8-a", "" ,d)}" + +MACHINEOVERRIDES =. "${@bb.utils.contains("TUNE_FEATURES", "cortexa57-cortexa53", "cortexa57-cortexa53:", "" ,d)}" + +TUNE_CCARGS .= "${@bb.utils.contains("TUNE_FEATURES", "cortexa57-cortexa53", " -mtune=cortex-a57.cortex-a53", "", d)}" + +# Little Endian base configs +AVAILTUNES += "cortexa57-cortexa53" +ARMPKGARCH_tune-cortexa57-cortexa53 = "cortexa57-cortexa53" +TUNE_FEATURES_tune-cortexa57-cortexa53 = "${TUNE_FEATURES_tune-aarch64} cortexa57-cortexa53" +PACKAGE_EXTRA_ARCHS_tune-cortexa57-cortexa53 = "${PACKAGE_EXTRA_ARCHS_tune-aarch64} cortexa57-cortexa53" +BASE_LIB_tune-cortexa57-cortexa53 = "lib64" diff --git a/meta-rcar-gen3/conf/machine/include/tune-cortexa57.inc b/meta-rcar-gen3/conf/machine/include/tune-cortexa57.inc new file mode 100644 index 0000000..509aee4 --- /dev/null +++ b/meta-rcar-gen3/conf/machine/include/tune-cortexa57.inc @@ -0,0 +1,18 @@ +DEFAULTTUNE ?= "cortexa57" +require conf/machine/include/arm/arch-armv8.inc + +TUNEVALID[cortexa57] = "Enable Cortex-A57 specific processor optimizations" +TUNECONFLICTS[aarch64] = "armv4 armv5 armv6 armv7 armv7a" + +TUNE_CCARGS .= "${@bb.utils.contains("TUNE_FEATURES", "aarch64", " -march=armv8-a", "" ,d)}" + +MACHINEOVERRIDES =. "${@bb.utils.contains("TUNE_FEATURES", "cortexa57", "cortexa57:", "" ,d)}" + +TUNE_CCARGS .= "${@bb.utils.contains("TUNE_FEATURES", "cortexa57", " -mtune=cortex-a57", "", d)}" + +# Little Endian base configs +AVAILTUNES += "cortexa57" +ARMPKGARCH_tune-cortexa57 = "cortexa57" +TUNE_FEATURES_tune-cortexa57 = "${TUNE_FEATURES_tune-aarch64} cortexa57" +PACKAGE_EXTRA_ARCHS_tune-cortexa57 = "${PACKAGE_EXTRA_ARCHS_tune-aarch64} cortexa57" +BASE_LIB_tune-cortexa57 = "lib64" diff --git a/meta-rcar-gen3/conf/machine/m3ulcb.conf b/meta-rcar-gen3/conf/machine/m3ulcb.conf new file mode 100644 index 0000000..987373f --- /dev/null +++ b/meta-rcar-gen3/conf/machine/m3ulcb.conf @@ -0,0 +1,38 @@ +#@TYPE: Machine +#@NAME: M3ULCB machine +#@DESCRIPTION: Machine configuration for running M3ULCB + +DEFAULTTUNE ?= "cortexa57-cortexa53" +require conf/machine/include/tune-cortexa57-cortexa53.inc +require conf/machine/include/${SOC_FAMILY}.inc + +# 32BIT package install (default is disable) +# This variables can be used only in multilib. +USE_32BIT_PKGS ?= "0" +USE_32BIT_WAYLAND ?= "0" +USE_32BIT_MMP ?= "0" + +MACHINE_FEATURES = "" + +KERNEL_IMAGETYPE = "Image" +IMAGE_FSTYPES = "tar.bz2 ext4 cpio.gz" + +SERIAL_CONSOLE = "115200 ttySC0" + +# Configuration for kernel +PREFERRED_PROVIDER_virtual/kernel = "linux-renesas" +KERNEL_DEVICETREE = "renesas/r8a7796-m3ulcb.dtb" + +# Configuration for ARM Trusted Firmware +EXTRA_IMAGEDEPENDS += " arm-trusted-firmware optee-os" + +# u-boot +PREFERRED_VERSION_u-boot = "v2015.04%" +EXTRA_IMAGEDEPENDS += " u-boot" +UBOOT_MACHINE = "m3ulcb_defconfig" + +# libdrm +PREFERRED_VERSION_libdrm = "2.4.68" + +# Add variable to Build Configuration in build log +BUILDCFG_VARS_append = " SOC_FAMILY" diff --git a/meta-rcar-gen3/conf/machine/salvator-x.conf b/meta-rcar-gen3/conf/machine/salvator-x.conf new file mode 100644 index 0000000..59e4469 --- /dev/null +++ b/meta-rcar-gen3/conf/machine/salvator-x.conf @@ -0,0 +1,48 @@ +#@TYPE: Machine +#@NAME: Salvator-X machine +#@DESCRIPTION: Machine configuration for running Salvator-X + +DEFAULTTUNE ?= "cortexa57-cortexa53" +require conf/machine/include/tune-cortexa57-cortexa53.inc +require conf/machine/include/${SOC_FAMILY}.inc + +# 32BIT package install (default is disable) +# This variables can be used only in multilib. +USE_32BIT_PKGS ?= "0" +USE_32BIT_WAYLAND ?= "0" +USE_32BIT_MMP ?= "0" + +MACHINE_FEATURES = "" + +KERNEL_IMAGETYPE = "Image" +IMAGE_FSTYPES = "tar.bz2 ext4 cpio.gz" + +SERIAL_CONSOLE = "115200 ttySC0" + +# Configuration for kernel +PREFERRED_PROVIDER_virtual/kernel = "linux-renesas" +# Device tree for H3 +KERNEL_DEVICETREE_r8a7795 = " \ + renesas/r8a7795-es1-salvator-x.dtb \ + renesas/r8a7795-salvator-x.dtb \ + renesas/r8a7795-salvator-xs.dtb \ +" +# Device tree for M3 +KERNEL_DEVICETREE_r8a7796 = "renesas/r8a7796-salvator-x.dtb" + +# Configuration for ARM Trusted Firmware +EXTRA_IMAGEDEPENDS += " arm-trusted-firmware optee-os" + +# u-boot +PREFERRED_VERSION_u-boot = "v2015.04%" +EXTRA_IMAGEDEPENDS += " u-boot" +# H3 u-boot configure +UBOOT_MACHINE_r8a7795 = "r8a7795_salvator-x_defconfig" +# M3 u-boot configure +UBOOT_MACHINE_r8a7796 = "r8a7796_salvator-x_defconfig" + +# libdrm +PREFERRED_VERSION_libdrm = "2.4.68" + +# Add variable to Build Configuration in build log +BUILDCFG_VARS_append = " SOC_FAMILY" diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/bblayers.conf new file mode 100644 index 0000000..96ff8ad --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/bblayers.conf @@ -0,0 +1,16 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \ + ${TOPDIR}/../meta-linaro/meta-optee \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local-wayland.conf new file mode 100644 index 0000000..1f76008 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local-wayland.conf @@ -0,0 +1,271 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "h3ulcb" + +SOC_FAMILY = "r8a7795" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.2" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# for Wayland/Weston weston-laucher +DISTRO_FEATURES_append = " pam" + +# Mask the wayland related to GFX +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Mask the gstreamer recipe for MMP +BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer" + +# Add for gstreamer plugins ugly +LICENSE_FLAGS_WHITELIST = "commercial" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local.conf new file mode 100644 index 0000000..e5e2026 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local.conf @@ -0,0 +1,262 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "h3ulcb" + +SOC_FAMILY = "r8a7795" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.2" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Mask graphic Pkgs +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/bblayers.conf new file mode 100644 index 0000000..96ff8ad --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/bblayers.conf @@ -0,0 +1,16 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \ + ${TOPDIR}/../meta-linaro/meta-optee \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/local-wayland.conf new file mode 100644 index 0000000..aa63d8e --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/local-wayland.conf @@ -0,0 +1,283 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "h3ulcb" + +SOC_FAMILY = "r8a7795" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.2" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Enable Gfx Pkgs +MACHINE_FEATURES_append = " gsx" +MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2" + +# for Wayland/Weston +DISTRO_FEATURES_append = " pam" +PREFERRED_PROVIDER_virtual/libgles1 = "" +PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" +PREFERRED_PROVIDER_virtual/egl = "gles-user-module" +PREFERRED_PROVIDER_virtual/libgl = "" +PREFERRED_PROVIDER_virtual/mesa = "" +PREFERRED_PROVIDER_libgbm = "libgbm" +PREFERRED_PROVIDER_libgbm-dev = "libgbm" +BBMASK .= "|mesa-gl" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Mask the gstreamer recipe for MMP +BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer" + +# Add for gstreamer plugins ugly +LICENSE_FLAGS_WHITELIST = "commercial" + +# Fix the Warning of gstreamer plugins +RDEPENDS_gstreamer1.0-plugins-bad = "libwayland-egl" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/bblayers.conf new file mode 100644 index 0000000..96ff8ad --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/bblayers.conf @@ -0,0 +1,16 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \ + ${TOPDIR}/../meta-linaro/meta-optee \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/local-wayland.conf new file mode 100644 index 0000000..d5db020 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/local-wayland.conf @@ -0,0 +1,372 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "h3ulcb" + +SOC_FAMILY = "r8a7795" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.2" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Enable Gfx Pkgs +MACHINE_FEATURES_append = " gsx" +MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2" + +# for Wayland/Weston +DISTRO_FEATURES_append = " pam" +PREFERRED_PROVIDER_virtual/libgles1 = "" +PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" +PREFERRED_PROVIDER_virtual/egl = "gles-user-module" +PREFERRED_PROVIDER_virtual/libgl = "" +PREFERRED_PROVIDER_virtual/mesa = "" +PREFERRED_PROVIDER_libgbm = "libgbm" +PREFERRED_PROVIDER_libgbm-dev = "libgbm" +BBMASK .= "|mesa-gl" + +# Enable Multimedia features +MACHINE_FEATURES_append = " multimedia" + +# for gstreamer omx plugins +LICENSE_FLAGS_WHITELIST = "commercial" +# for mmp test program +DISTRO_FEATURES_append = " mm-test" + +# for weston v4l2 renderer +#DISTRO_FEATURES_append = " v4l2-renderer" + +# OMX H263 decoder library for Linux (RTM0AC0000XV263D30SL40C) +#DISTRO_FEATURES_append = " h263dec_lib" + +# OMX H264 decoder library for Linux (RTM0AC0000XV264D30SL40C) +DISTRO_FEATURES_append = " h264dec_lib" + +# OMX H264 encoder library for Linux (RTM0AC0000XV264E30SL40C) +#DISTRO_FEATURES_append = " h264enc_lib" + +# OMX H265 decoder library for Linux (RTM0AC0000XV265D30SL40C) +#DISTRO_FEATURES_append = " h265dec_lib" + +# OMX MPEG2 decoder library for Linux (RTM0AC0000XVM2VD30SL40C) +#DISTRO_FEATURES_append = " mpeg2dec_lib" + +# OMX Media Component MPEG4 Decoder Library for Linux (RTM0AC0000XVM4VD30SL40C) +#DISTRO_FEATURES_append = " mpeg4dec_lib" + +# OMX Media Component VC-1 Decoder Library for Linux (RTM0AC0000XVVC1D30SL40C) +#DISTRO_FEATURES_append = " vc1dec_lib" + +# OMX Media Component DivXD Decoder Library for Linux (RTM0AC0000XVDVXD30SL40C) +#DISTRO_FEATURES_append = " divxdec_lib" + +# OMX Media Component RealVideo Decoder Library for Linux (RTM0AC0000XVRLVD30SL40C) +#DISTRO_FEATURES_append = " rvdec_lib" + +# OMX Media Component ALAC Decoder Library for Linux (RTM0AC0000XAALAD30SL40C) +#DISTRO_FEATURES_append = " alacdec_lib" + +# OMX Media Component FLAC Decoder Library for Linux (RTM0AC0000XAFLAD30SL40C) +#DISTRO_FEATURES_append = " flacdec_lib" + +# OMX AAC-LC decoder library for Linux (RTM0AC0000XAAACD30SL40C), +# AAC-LC 2ch decoder middleware library for Linux (RTM0AC0000ADAACMZ1SL40C) +DISTRO_FEATURES_append = " aaclcdec_lib" +DISTRO_FEATURES_append = " aaclcdec_mdw" + +# OMX aacPlus V2 decoder library for Linux (RTM0AC0000XAAAPD30SL40C), +# aacPlus V2 decoder middleware library for Linux (RTM0AC0000ADAAPMZ1SL40C) +#DISTRO_FEATURES_append = " aacpv2dec_lib" +#DISTRO_FEATURES_append = " aacpv2dec_mdw" + +# OMX MP3 decoder library for Linux (RTM0AC0000XAMP3D30SL40C), +# MP3 decoder middleware library for Linux (RTM0AC0000ADMP3MZ1SL40C) +#DISTRO_FEATURES_append = " mp3dec_lib" +#DISTRO_FEATURES_append = " mp3dec_mdw" + +# OMX WMA decoder library for Linux (RTM0AC0000XAWMAD30SL40C), +# WMA decoder middleware library for Linux (RTM0AC0000ADWMAMZ1SL40C) +#DISTRO_FEATURES_append = " wmadec_lib" +#DISTRO_FEATURES_append = " wmadec_mdw" + +# OMX AAC-LC encoder library for Linux (RTM0AC0000XAAACE30SL40C) +# AAC-LC encoder middleware library for Linux (RTM0AC0000AEAACMZ1SL40C) +#DISTRO_FEATURES_append = " aaclcenc_lib" +#DISTRO_FEATURES_append = " aaclcenc_mdw" + +# OMX Dolby(R) Digital decoder library for Linux (RTM0AC0000XADD5D30SL40C), +# Dolby(R) Digital decoder middleware library for Linux (RTM0AC0000ADDD5MZ1SL40C) +#DISTRO_FEATURES_append = " dddec_lib" +#DISTRO_FEATURES_append = " dddec_mdw" + +# CMS Basic Color Management Middleware for Linux (RTM0AC0000JRCMBCV0SL40C) +#DISTRO_FEATURES_append = " cmsbcm" + +# CMS CMM3 Backlight Control Middleware for Linux (RTM0AC0000JRCMBLC0SL40C) +#DISTRO_FEATURES_append = " cmsblc" + +# CMS VSP2 Dynamic Gamma Correction Middleware for Linux (RTM0AC0000JRCMDGV0SL40C) +#DISTRO_FEATURES_append = " cmsdgc" + +# ISDB-T DTV Software Package for Linux (RTM0RC0000TE020000SL40C) +#DISTRO_FEATURES_append = " dtv" + +# DVD Core-Middleware for Linux (RTM0RC0000XDVDC301SL40C) +#DISTRO_FEATURES_append = " dvd" + +# ADSP Driver for Linux (RCG3AHPDL4001ZDO) +# ADSP Interface for Linux (RCG3AHIFL4001ZDP) +# ADSP Framework (RCG3AHFWN0101ZDP) +#DISTRO_FEATURES_append = " adsp" + +# AVB Software Package for Linux +#DISTRO_FEATURES_append = " avb" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" + +# Evaluation packages +#DISTRO_FEATURES_append = " use_eva_pkg" diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/bblayers.conf new file mode 100644 index 0000000..3b2c068 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/bblayers.conf @@ -0,0 +1,15 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + ${TOPDIR}/../meta-linaro/meta-optee \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local-wayland.conf new file mode 100644 index 0000000..b01fb82 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local-wayland.conf @@ -0,0 +1,264 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "h3ulcb" + +SOC_FAMILY = "r8a7795" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# for Wayland/Weston weston-laucher +DISTRO_FEATURES_append = " pam" + +# Mask the wayland related to GFX +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Mask the gstreamer recipe for MMP +BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer" + +# Add for gstreamer plugins ugly +LICENSE_FLAGS_WHITELIST = "commercial" diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local.conf new file mode 100644 index 0000000..c7128c4 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local.conf @@ -0,0 +1,255 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "h3ulcb" + +SOC_FAMILY = "r8a7795" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Mask graphic Pkgs +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/bblayers.conf new file mode 100644 index 0000000..96ff8ad --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/bblayers.conf @@ -0,0 +1,16 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \ + ${TOPDIR}/../meta-linaro/meta-optee \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local-wayland.conf new file mode 100644 index 0000000..054c44b --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local-wayland.conf @@ -0,0 +1,271 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "m3ulcb" + +SOC_FAMILY = "r8a7796" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.2" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# for Wayland/Weston weston-laucher +DISTRO_FEATURES_append = " pam" + +# Mask the wayland related to GFX +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Mask the gstreamer recipe for MMP +BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer" + +# Add for gstreamer plugins ugly +LICENSE_FLAGS_WHITELIST = "commercial" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local.conf new file mode 100644 index 0000000..9583dd6 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local.conf @@ -0,0 +1,262 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "m3ulcb" + +SOC_FAMILY = "r8a7796" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.2" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Mask graphic Pkgs +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/bblayers.conf new file mode 100644 index 0000000..96ff8ad --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/bblayers.conf @@ -0,0 +1,16 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \ + ${TOPDIR}/../meta-linaro/meta-optee \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/local-wayland.conf new file mode 100644 index 0000000..fdf452c --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/local-wayland.conf @@ -0,0 +1,283 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "m3ulcb" + +SOC_FAMILY = "r8a7796" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.2" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Enable Gfx Pkgs +MACHINE_FEATURES_append = " gsx" +MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2" + +# for Wayland/Weston +DISTRO_FEATURES_append = " pam" +PREFERRED_PROVIDER_virtual/libgles1 = "" +PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" +PREFERRED_PROVIDER_virtual/egl = "gles-user-module" +PREFERRED_PROVIDER_virtual/libgl = "" +PREFERRED_PROVIDER_virtual/mesa = "" +PREFERRED_PROVIDER_libgbm = "libgbm" +PREFERRED_PROVIDER_libgbm-dev = "libgbm" +BBMASK .= "|mesa-gl" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Mask the gstreamer recipe for MMP +BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer" + +# Add for gstreamer plugins ugly +LICENSE_FLAGS_WHITELIST = "commercial" + +# Fix the Warning of gstreamer plugins +RDEPENDS_gstreamer1.0-plugins-bad = "libwayland-egl" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/bblayers.conf new file mode 100644 index 0000000..96ff8ad --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/bblayers.conf @@ -0,0 +1,16 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \ + ${TOPDIR}/../meta-linaro/meta-optee \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/local-wayland.conf new file mode 100644 index 0000000..205c6df --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/local-wayland.conf @@ -0,0 +1,372 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "m3ulcb" + +SOC_FAMILY = "r8a7796" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.2" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Enable Gfx Pkgs +MACHINE_FEATURES_append = " gsx" +MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2" + +# for Wayland/Weston +DISTRO_FEATURES_append = " pam" +PREFERRED_PROVIDER_virtual/libgles1 = "" +PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" +PREFERRED_PROVIDER_virtual/egl = "gles-user-module" +PREFERRED_PROVIDER_virtual/libgl = "" +PREFERRED_PROVIDER_virtual/mesa = "" +PREFERRED_PROVIDER_libgbm = "libgbm" +PREFERRED_PROVIDER_libgbm-dev = "libgbm" +BBMASK .= "|mesa-gl" + +# Enable Multimedia features +MACHINE_FEATURES_append = " multimedia" + +# for gstreamer omx plugins +LICENSE_FLAGS_WHITELIST = "commercial" +# for mmp test program +DISTRO_FEATURES_append = " mm-test" + +# for weston v4l2 renderer +#DISTRO_FEATURES_append = " v4l2-renderer" + +# OMX H263 decoder library for Linux (RTM0AC0000XV263D30SL40C) +#DISTRO_FEATURES_append = " h263dec_lib" + +# OMX H264 decoder library for Linux (RTM0AC0000XV264D30SL40C) +DISTRO_FEATURES_append = " h264dec_lib" + +# OMX H264 encoder library for Linux (RTM0AC0000XV264E30SL40C) +#DISTRO_FEATURES_append = " h264enc_lib" + +# OMX H265 decoder library for Linux (RTM0AC0000XV265D30SL40C) +#DISTRO_FEATURES_append = " h265dec_lib" + +# OMX MPEG2 decoder library for Linux (RTM0AC0000XVM2VD30SL40C) +#DISTRO_FEATURES_append = " mpeg2dec_lib" + +# OMX Media Component MPEG4 Decoder Library for Linux (RTM0AC0000XVM4VD30SL40C) +#DISTRO_FEATURES_append = " mpeg4dec_lib" + +# OMX Media Component VC-1 Decoder Library for Linux (RTM0AC0000XVVC1D30SL40C) +#DISTRO_FEATURES_append = " vc1dec_lib" + +# OMX Media Component DivXD Decoder Library for Linux (RTM0AC0000XVDVXD30SL40C) +#DISTRO_FEATURES_append = " divxdec_lib" + +# OMX Media Component RealVideo Decoder Library for Linux (RTM0AC0000XVRLVD30SL40C) +#DISTRO_FEATURES_append = " rvdec_lib" + +# OMX Media Component ALAC Decoder Library for Linux (RTM0AC0000XAALAD30SL40C) +#DISTRO_FEATURES_append = " alacdec_lib" + +# OMX Media Component FLAC Decoder Library for Linux (RTM0AC0000XAFLAD30SL40C) +#DISTRO_FEATURES_append = " flacdec_lib" + +# OMX AAC-LC decoder library for Linux (RTM0AC0000XAAACD30SL40C), +# AAC-LC 2ch decoder middleware library for Linux (RTM0AC0000ADAACMZ1SL40C) +DISTRO_FEATURES_append = " aaclcdec_lib" +DISTRO_FEATURES_append = " aaclcdec_mdw" + +# OMX aacPlus V2 decoder library for Linux (RTM0AC0000XAAAPD30SL40C), +# aacPlus V2 decoder middleware library for Linux (RTM0AC0000ADAAPMZ1SL40C) +#DISTRO_FEATURES_append = " aacpv2dec_lib" +#DISTRO_FEATURES_append = " aacpv2dec_mdw" + +# OMX MP3 decoder library for Linux (RTM0AC0000XAMP3D30SL40C), +# MP3 decoder middleware library for Linux (RTM0AC0000ADMP3MZ1SL40C) +#DISTRO_FEATURES_append = " mp3dec_lib" +#DISTRO_FEATURES_append = " mp3dec_mdw" + +# OMX WMA decoder library for Linux (RTM0AC0000XAWMAD30SL40C), +# WMA decoder middleware library for Linux (RTM0AC0000ADWMAMZ1SL40C) +#DISTRO_FEATURES_append = " wmadec_lib" +#DISTRO_FEATURES_append = " wmadec_mdw" + +# OMX AAC-LC encoder library for Linux (RTM0AC0000XAAACE30SL40C) +# AAC-LC encoder middleware library for Linux (RTM0AC0000AEAACMZ1SL40C) +#DISTRO_FEATURES_append = " aaclcenc_lib" +#DISTRO_FEATURES_append = " aaclcenc_mdw" + +# OMX Dolby(R) Digital decoder library for Linux (RTM0AC0000XADD5D30SL40C), +# Dolby(R) Digital decoder middleware library for Linux (RTM0AC0000ADDD5MZ1SL40C) +#DISTRO_FEATURES_append = " dddec_lib" +#DISTRO_FEATURES_append = " dddec_mdw" + +# CMS Basic Color Management Middleware for Linux (RTM0AC0000JRCMBCV0SL40C) +#DISTRO_FEATURES_append = " cmsbcm" + +# CMS CMM3 Backlight Control Middleware for Linux (RTM0AC0000JRCMBLC0SL40C) +#DISTRO_FEATURES_append = " cmsblc" + +# CMS VSP2 Dynamic Gamma Correction Middleware for Linux (RTM0AC0000JRCMDGV0SL40C) +#DISTRO_FEATURES_append = " cmsdgc" + +# ISDB-T DTV Software Package for Linux (RTM0RC0000TE020000SL40C) +#DISTRO_FEATURES_append = " dtv" + +# DVD Core-Middleware for Linux (RTM0RC0000XDVDC301SL40C) +#DISTRO_FEATURES_append = " dvd" + +# ADSP Driver for Linux (RCG3AHPDL4001ZDO) +# ADSP Interface for Linux (RCG3AHIFL4001ZDP) +# ADSP Framework (RCG3AHFWN0101ZDP) +#DISTRO_FEATURES_append = " adsp" + +# AVB Software Package for Linux +#DISTRO_FEATURES_append = " avb" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" + +# Evaluation packages +#DISTRO_FEATURES_append = " use_eva_pkg" diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/bblayers.conf new file mode 100644 index 0000000..3b2c068 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/bblayers.conf @@ -0,0 +1,15 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + ${TOPDIR}/../meta-linaro/meta-optee \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local-wayland.conf new file mode 100644 index 0000000..2bd2154 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local-wayland.conf @@ -0,0 +1,264 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "m3ulcb" + +SOC_FAMILY = "r8a7796" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# for Wayland/Weston weston-laucher +DISTRO_FEATURES_append = " pam" + +# Mask graphic Pkgs +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Mask the gstreamer recipe for MMP +BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer" + +# Add for gstreamer plugins ugly +LICENSE_FLAGS_WHITELIST = "commercial" diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local.conf new file mode 100644 index 0000000..f682e03 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local.conf @@ -0,0 +1,255 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "m3ulcb" + +SOC_FAMILY = "r8a7796" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Mask graphic Pkgs +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/bblayers.conf new file mode 100644 index 0000000..96ff8ad --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/bblayers.conf @@ -0,0 +1,16 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \ + ${TOPDIR}/../meta-linaro/meta-optee \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local-wayland.conf new file mode 100644 index 0000000..1458e29 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local-wayland.conf @@ -0,0 +1,274 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "salvator-x" + +# This sets the SoC +# H3: r8a7795, M3: r8a7796 +SOC_FAMILY = "r8a7795" +#SOC_FAMILY = "r8a7796" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.2" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# for Wayland/Weston weston-laucher +DISTRO_FEATURES_append = " pam" + +# Mask the wayland related to GFX +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Mask the gstreamer recipe for MMP +BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer" + +# Add for gstreamer plugins ugly +LICENSE_FLAGS_WHITELIST = "commercial" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local.conf new file mode 100644 index 0000000..bab7f0c --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local.conf @@ -0,0 +1,265 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "salvator-x" + +# This sets the SoC +# H3: r8a7795, M3: r8a7796 +SOC_FAMILY = "r8a7795" +#SOC_FAMILY = "r8a7796" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.2" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Mask graphic Pkgs +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/bblayers.conf new file mode 100644 index 0000000..96ff8ad --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/bblayers.conf @@ -0,0 +1,16 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \ + ${TOPDIR}/../meta-linaro/meta-optee \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/local-wayland.conf new file mode 100644 index 0000000..9a80463 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/local-wayland.conf @@ -0,0 +1,286 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "salvator-x" + +# This sets the SoC +# H3: r8a7795, M3: r8a7796 +SOC_FAMILY = "r8a7795" +#SOC_FAMILY = "r8a7796" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.2" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Enable Gfx Pkgs +MACHINE_FEATURES_append = " gsx" +MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2" + +# for Wayland/Weston +DISTRO_FEATURES_append = " pam" +PREFERRED_PROVIDER_virtual/libgles1 = "" +PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" +PREFERRED_PROVIDER_virtual/egl = "gles-user-module" +PREFERRED_PROVIDER_virtual/libgl = "" +PREFERRED_PROVIDER_virtual/mesa = "" +PREFERRED_PROVIDER_libgbm = "libgbm" +PREFERRED_PROVIDER_libgbm-dev = "libgbm" +BBMASK .= "|mesa-gl" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Mask the gstreamer recipe for MMP +BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer" + +# Add for gstreamer plugins ugly +LICENSE_FLAGS_WHITELIST = "commercial" + +# Fix the Warning of gstreamer plugins +RDEPENDS_gstreamer1.0-plugins-bad = "libwayland-egl" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/bblayers.conf new file mode 100644 index 0000000..96ff8ad --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/bblayers.conf @@ -0,0 +1,16 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \ + ${TOPDIR}/../meta-linaro/meta-optee \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/local-wayland.conf new file mode 100644 index 0000000..89b3671 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/local-wayland.conf @@ -0,0 +1,375 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "salvator-x" + +# This sets the SoC +# H3: r8a7795, M3: r8a7796 +SOC_FAMILY = "r8a7795" +#SOC_FAMILY = "r8a7796" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.2" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Enable Gfx Pkgs +MACHINE_FEATURES_append = " gsx" +MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2" + +# for Wayland/Weston +DISTRO_FEATURES_append = " pam" +PREFERRED_PROVIDER_virtual/libgles1 = "" +PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" +PREFERRED_PROVIDER_virtual/egl = "gles-user-module" +PREFERRED_PROVIDER_virtual/libgl = "" +PREFERRED_PROVIDER_virtual/mesa = "" +PREFERRED_PROVIDER_libgbm = "libgbm" +PREFERRED_PROVIDER_libgbm-dev = "libgbm" +BBMASK .= "|mesa-gl" + +# Enable Multimedia features +MACHINE_FEATURES_append = " multimedia" + +# for gstreamer omx plugins +LICENSE_FLAGS_WHITELIST = "commercial" +# for mmp test program +DISTRO_FEATURES_append = " mm-test" + +# for weston v4l2 renderer +#DISTRO_FEATURES_append = " v4l2-renderer" + +# OMX H263 decoder library for Linux (RTM0AC0000XV263D30SL40C) +#DISTRO_FEATURES_append = " h263dec_lib" + +# OMX H264 decoder library for Linux (RTM0AC0000XV264D30SL40C) +DISTRO_FEATURES_append = " h264dec_lib" + +# OMX H264 encoder library for Linux (RTM0AC0000XV264E30SL40C) +#DISTRO_FEATURES_append = " h264enc_lib" + +# OMX H265 decoder library for Linux (RTM0AC0000XV265D30SL40C) +#DISTRO_FEATURES_append = " h265dec_lib" + +# OMX MPEG2 decoder library for Linux (RTM0AC0000XVM2VD30SL40C) +#DISTRO_FEATURES_append = " mpeg2dec_lib" + +# OMX Media Component MPEG4 Decoder Library for Linux (RTM0AC0000XVM4VD30SL40C) +#DISTRO_FEATURES_append = " mpeg4dec_lib" + +# OMX Media Component VC-1 Decoder Library for Linux (RTM0AC0000XVVC1D30SL40C) +#DISTRO_FEATURES_append = " vc1dec_lib" + +# OMX Media Component DivXD Decoder Library for Linux (RTM0AC0000XVDVXD30SL40C) +#DISTRO_FEATURES_append = " divxdec_lib" + +# OMX Media Component RealVideo Decoder Library for Linux (RTM0AC0000XVRLVD30SL40C) +#DISTRO_FEATURES_append = " rvdec_lib" + +# OMX Media Component ALAC Decoder Library for Linux (RTM0AC0000XAALAD30SL40C) +#DISTRO_FEATURES_append = " alacdec_lib" + +# OMX Media Component FLAC Decoder Library for Linux (RTM0AC0000XAFLAD30SL40C) +#DISTRO_FEATURES_append = " flacdec_lib" + +# OMX AAC-LC decoder library for Linux (RTM0AC0000XAAACD30SL40C), +# AAC-LC 2ch decoder middleware library for Linux (RTM0AC0000ADAACMZ1SL40C) +DISTRO_FEATURES_append = " aaclcdec_lib" +DISTRO_FEATURES_append = " aaclcdec_mdw" + +# OMX aacPlus V2 decoder library for Linux (RTM0AC0000XAAAPD30SL40C), +# aacPlus V2 decoder middleware library for Linux (RTM0AC0000ADAAPMZ1SL40C) +#DISTRO_FEATURES_append = " aacpv2dec_lib" +#DISTRO_FEATURES_append = " aacpv2dec_mdw" + +# OMX MP3 decoder library for Linux (RTM0AC0000XAMP3D30SL40C), +# MP3 decoder middleware library for Linux (RTM0AC0000ADMP3MZ1SL40C) +#DISTRO_FEATURES_append = " mp3dec_lib" +#DISTRO_FEATURES_append = " mp3dec_mdw" + +# OMX WMA decoder library for Linux (RTM0AC0000XAWMAD30SL40C), +# WMA decoder middleware library for Linux (RTM0AC0000ADWMAMZ1SL40C) +#DISTRO_FEATURES_append = " wmadec_lib" +#DISTRO_FEATURES_append = " wmadec_mdw" + +# OMX AAC-LC encoder library for Linux (RTM0AC0000XAAACE30SL40C) +# AAC-LC encoder middleware library for Linux (RTM0AC0000AEAACMZ1SL40C) +#DISTRO_FEATURES_append = " aaclcenc_lib" +#DISTRO_FEATURES_append = " aaclcenc_mdw" + +# OMX Dolby(R) Digital decoder library for Linux (RTM0AC0000XADD5D30SL40C), +# Dolby(R) Digital decoder middleware library for Linux (RTM0AC0000ADDD5MZ1SL40C) +#DISTRO_FEATURES_append = " dddec_lib" +#DISTRO_FEATURES_append = " dddec_mdw" + +# CMS Basic Color Management Middleware for Linux (RTM0AC0000JRCMBCV0SL40C) +#DISTRO_FEATURES_append = " cmsbcm" + +# CMS CMM3 Backlight Control Middleware for Linux (RTM0AC0000JRCMBLC0SL40C) +#DISTRO_FEATURES_append = " cmsblc" + +# CMS VSP2 Dynamic Gamma Correction Middleware for Linux (RTM0AC0000JRCMDGV0SL40C) +#DISTRO_FEATURES_append = " cmsdgc" + +# ISDB-T DTV Software Package for Linux (RTM0RC0000TE020000SL40C) +#DISTRO_FEATURES_append = " dtv" + +# DVD Core-Middleware for Linux (RTM0RC0000XDVDC301SL40C) +#DISTRO_FEATURES_append = " dvd" + +# ADSP Driver for Linux (RCG3AHPDL4001ZDO) +# ADSP Interface for Linux (RCG3AHIFL4001ZDP) +# ADSP Framework (RCG3AHFWN0101ZDP) +#DISTRO_FEATURES_append = " adsp" + +# AVB Software Package for Linux +#DISTRO_FEATURES_append = " avb" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" + +# Evaluation packages +#DISTRO_FEATURES_append = " use_eva_pkg" diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/bblayers.conf new file mode 100644 index 0000000..3b2c068 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/bblayers.conf @@ -0,0 +1,15 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + ${TOPDIR}/../meta-linaro/meta-optee \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-wayland.conf new file mode 100644 index 0000000..1520bdb --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-wayland.conf @@ -0,0 +1,267 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "salvator-x" + +# This sets the SoC +# H3: r8a7795, M3: r8a7796 +SOC_FAMILY = "r8a7795" +#SOC_FAMILY = "r8a7796" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# for Wayland/Weston weston-laucher +DISTRO_FEATURES_append = " pam" + +# Mask the wayland related to GFX +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Mask the gstreamer recipe for MMP +BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer" + +# Add for gstreamer plugins ugly +LICENSE_FLAGS_WHITELIST = "commercial" diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local.conf new file mode 100644 index 0000000..61f5096 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local.conf @@ -0,0 +1,258 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "salvator-x" + +# This sets the SoC +# H3: r8a7795, M3: r8a7796 +SOC_FAMILY = "r8a7795" +#SOC_FAMILY = "r8a7796" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Mask graphic Pkgs +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" diff --git a/meta-rcar-gen3/docs/sample/copyscript/copy_evaproprietary_softwares.sh b/meta-rcar-gen3/docs/sample/copyscript/copy_evaproprietary_softwares.sh new file mode 100755 index 0000000..73b63c6 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/copyscript/copy_evaproprietary_softwares.sh @@ -0,0 +1,1345 @@ +#!/bin/sh + +# Copyright (C) Renesas Electronics Corporation 2016 All rights reserved. + +usage() +{ +cat << EOF + usage: `basename $0` [-f] [-d] source-directory + -f: fource copy. ignore md5check + -d: debug mode + + Ex) + `basename $0` -f my_package_dir +EOF +} + +##### MD5 list ##### +. `dirname $0`/md5list.txt + +##### Library List ##### +# Audio Library +# Please add omx audio library to "_audio_list" +# Don't use space in xxx_name. +# audio_list=",, \ +# ,, \ +# ,," +_audio_list="AAC-LC_decoder_lib,EVARTM0AC0000XAAACD30SL40C,RTM0AC0000XAAACD30SL40C.tar.gz \ + aacPlusV2_decoder_lib,EVARTM0AC0000XAAAPD30SL40C,RTM0AC0000XAAAPD30SL40C.tar.gz \ + MP3_decoder_lib,EVARTM0AC0000XAMP3D30SL40C,RTM0AC0000XAMP3D30SL40C.tar.gz \ + WMA_decoder_lib,EVARTM0AC0000XAWMAD30SL40C,RTM0AC0000XAWMAD30SL40C.tar.gz \ + AAC-LC_encoder_lib,EVARTM0AC0000XAAACE30SL40C,RTM0AC0000XAAACE30SL40C.tar.gz \ + ALAC_decoder_lib,EVARTM0AC0000XAALAD30SL40C,RTM0AC0000XAALAD30SL40C.tar.gz \ + FLAC_decoder_lib,EVARTM0AC0000XAFLAD30SL40C,RTM0AC0000XAFLAD30SL40C.tar.gz \ + Dolby_decoder_lib,EVARTM0AC0000XADD5D30SL40C,RTM0AC0000XADD5D30SL40C.tar.gz" + +# Audio M/W Library +# Please add omx audio library to "_audio_mw_list" +# Don't use space in xxx_name. +# audio_mw_list=",, \ +# ,, \ +# ,," +_audio_mw_list="AAC-LC_decoder_M/W,EVARTM0AC0000ADAACMZ1SL40C,RTM0AC0000ADAACMZ1SL40C.tar.gz \ + aacPlusV2_decoder_M/W,EVARTM0AC0000ADAAPMZ1SL40C,RTM0AC0000ADAAPMZ1SL40C.tar.gz \ + MP3_decoder_M/W,EVARTM0AC0000ADMP3MZ1SL40C,RTM0AC0000ADMP3MZ1SL40C.tar.gz \ + WMA_decoder_M/W,EVARTM0AC0000ADWMAMZ1SL40C,RTM0AC0000ADWMAMZ1SL40C.tar.gz \ + AAC-LC_encoder_M/W,EVARTM0AC0000AEAACMZ1SL40C,RTM0AC0000AEAACMZ1SL40C.tar.gz \ + DDD_decoder_M/W,EVARTM0AC0000ADDD5MZ1SL40C,RTM0AC0000ADDD5MZ1SL40C.tar.gz" + +# Video Decoder Library +# Please add omx video decoder library to "_video_dec_list" +# Don't use space in xxx_name. +# video_dec_list=",, \ +# ,, \ +# ,," +_video_dec_list="H263_decoder,EVARTM0AC0000XV263D30SL40C,EVARTM0AC0000XV263D30SL40C.tar.bz2 \ + H264_decoder,EVARTM0AC0000XV264D30SL40C,EVARTM0AC0000XV264D30SL40C.tar.bz2 \ + H265_decoder,EVARTM0AC0000XV265D30SL40C,EVARTM0AC0000XV265D30SL40C.tar.bz2 \ + MPEG2_decoder,EVARTM0AC0000XVM2VD30SL40C,EVARTM0AC0000XVM2VD30SL40C.tar.bz2 \ + MPEG4_decoder,EVARTM0AC0000XVM4VD30SL40C,EVARTM0AC0000XVM4VD30SL40C.tar.bz2 \ + VC1_decoder,EVARTM0AC0000XVVC1D30SL40C,EVARTM0AC0000XVVC1D30SL40C.tar.bz2 \ + DivX_decoder,EVARTM0AC0000XVDVXD30SL40C,EVARTM0AC0000XVDVXD30SL40C.tar.bz2 \ + RealVideo_decoder,EVARTM0AC0000XVRLVD30SL40C,EVARTM0AC0000XVRLVD30SL40C.tar.bz2" + +# Video Encoder Library +# Please add omx video encoder library to "_video_enc_list" +# Don't use space in xxx_name. +# video_enc_list=",, \ +# ,, \ +# ,," +_video_enc_list="H264_encoder,EVARTM0AC0000XV264E30SL40C,EVARTM0AC0000XV264E30SL40C.tar.bz2" + +# Common library packages +# Don't use space in xxx_name. +# XXX_list=",, \ +# ,, \ +# ,," +_omx_common_list="omx_common_lib,EVARTM0AC0000XCMCTL30SL40C,EVARTM0AC0000XCMCTL30SL40C.tar.bz2" +_uvcs_list="uvcs_lib,RCG3VUDRL4001ZDO,RCG3VUDRL4001ZDO.tar.bz2" +_video_enc_common_list="video_enc_common,EVARTM0AC0000XVCMNE30SL40C,EVARTM0AC0000XVCMNE30SL40C.tar.bz2" +_video_dec_common_list="video_dec_common,EVARTM0AC0000XVCMND30SL40C,EVARTM0AC0000XVCMND30SL40C.tar.bz2" +_audio_common_list="audio_common,EVARTM0AC0000XACMND30SL40C,RTM0AC0000XACMND30SL40C.tar.gz" + + +# DTV Library +# Please add DTV library to "_dtv_list" +# Don't use space in xxx_name. +# dtv_xx_list=",,, \ +# ,,, \ +# ,,," +_dtv_km_list="dtv_km,RCG3T001L4001ZDO,Software.tar.gz" +_dtv_um_list="dtv_lib,RTM0RC0000TE020000SL40C,Software.tar.gz,RTM0RC0000TE020000SL40C1 \ + dtv_userfunc,RTM0RC0000TE020000SL40C,../Reference/Reference.tar.gz,RTM0RC0000TE020000SL40C2" + +# DVD Library +# Please add DVD library to "_dvd_list" +# Don't use space in xxx_name. +# dvd_list=",,, \ +# ,,, \ +# ,,," +_dvd_list="dvd_lib,RTM0RC0000XDVDC301SL40C,Software.tar.gz" + +# CMS Library +# Please add CMS library to "_cms_list" +# Don't use space in xxx_name. +# cms_list=",, \ +# ,, \ +# ,," +_cms_list="bcm,RTM0AC0000JRCMBCV0SL40C,RTM0AC0000JRCMBCV0SL40C.tar.gz \ + blc,RTM0AC0000JRCMBLC0SL40C,RTM0AC0000JRCMBLC0SL40C.tar.gz \ + dgc,RTM0AC0000JRCMDGV0SL40C,RTM0AC0000JRCMDGV0SL40C.tar.gz" + +# ADSP +# Please add ADSP to "_adsp_list" +# Don't use space in xxx_name. +# adsp_xx_list=",, \ +# ,, \ +# ,," +_adsp_um_list="adsp_fw,RCG3AHFWN0101ZDP,RCG3AHFWN0101ZDP.tar.gz \ + adsp_if,RCG3AHIFL4001ZDP,RCG3AHIFL4001ZDP.tar.gz" +_adsp_km_list="adsp_driver,RCG3AHPDL4001ZDO,RCG3AHPDL4001ZDO.tar.gz" + +# GFX +# Please add GFX to "_gfx_list" +# Don't use space in xxx_name. +# gfx_list=",,, \ +# ,,, \ +# ,,," +_gfx_list="EVARTM0RC7795GLTG0001SL40C,EVA_r8a7795_linux_gsx_binaries_gles3.tar.bz2,RCH3G001L4001ZDO,GSX_KM_H3.tar.bz2 \ + EVARTM0RC7796GLTG0001SL40C,EVA_r8a7796_linux_gsx_binaries_gles3.tar.bz2,RCM3G001L4001ZDO,GSX_KM_M3.tar.bz2 \ + INFRTM0RC7795GLTG0001SL40C,INF_r8a7795_linux_gsx_binaries_gles3.tar.bz2,RCH3G001L4001ZDO,GSX_KM_H3.tar.bz2 \ + INFRTM0RC7796GLTG0001SL40C,INF_r8a7796_linux_gsx_binaries_gles3.tar.bz2,RCM3G001L4001ZDO,GSX_KM_M3.tar.bz2" + +# ICCOM +# Please add ICCOM to "_iccom_list" +# Don't use space in xxx_name. +# iccom_xx_list=",,, \ +# ,,, \ +# ,,," +_iccom_km_list="iccom_mfis,RCG3ZLIDL4001ZNO,iccom-mfis.tar.bz2,RCG3ZLIDL4001ZNO1 \ + iccom_sample,RCG3ZLIDL4001ZNO,iccom-hwspinlock-sample.tar.bz2,RCG3ZLIDL4001ZNO2" +_iccom_um_list="iccom_lib,RCG3ZLILL4001ZNO,libiccom.tar.bz2,RCG3ZLILL4001ZNO" + +# Crypto Packgae list +# Please add crypto (zip) package name to "_crypto_pkg_list" +# Don't use space in xxx_name. +# crypto_pkg_list=" " +_crypto_pkg_list="RTM0AC0000ADDD5MZ1SL40C" + +##### static value +_MODE_ZIP=1 +_MODE_TAR=2 +_MODE_CRYPTO_ZIP=3 +_GFX_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-gles/kernel-module-gles" +_GFX_UM_INST_DIR="../meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module" +_UVCS_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-uvcs/kernel-module-uvcs-drv" +_OMX_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/omx-module/omx-user-module" +_DTV_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-dtv/files" +_DTV_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/dtv-module/dtv-user-module" +_DVD_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/dvd-module/dvd-user-module" +_CMS_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/cms-module/cms-user-module" +_ADSP_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-adsp/xtensa-hifi" +_ADSP_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/adsp-module/files" +_ICCOM_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-iccom/files" +_ICCOM_UM_INST_DIR="../meta-rcar-gen3/recipes-connectivity/iccom-module/files" + +##### common function + +# $1: search file name +# $2: search directory +# return global variable +# _find_filename: find filename +# _extract_mode: _MODE_ZIP or _MODE_TAR +func_cmn_find_file() +{ +# echo "$1" +# echo "$2" + if [ -z "$1" ]; then + func_error "ERROR: func_cmn_find_file: empty filename" + fi + + if [ -z "$2" ]; then + _search_dir=${_src_full} + else + _search_dir=$2 + fi + + # search zip file +# zip_count=`find ${_search_dir} -maxdepth 1 -name "$1*.zip" | wc -l` + zip_count=`ls ${_search_dir}/$1*.zip 2>/dev/null | wc -l` + + # search tar file +# tar_count=`find ${_search_dir} -maxdepth 1 -name "$1*.tar.*" | wc -l` + tar_count=`ls ${_search_dir}/$1*.tar.* 2>/dev/null | wc -l` + + # duplicate file check + if [ 1 -lt `expr $zip_count + $tar_count` ]; then + echo "file1_zip = $zip_count" + echo "file1_tar = $tar_count" + func_error "ERROR: $1: too many files" + fi + + crypto_zip_count=0 + for i in ${_crypto_pkg_list} + do + if [ $1 = $i ]; then + crypto_zip_count=$zip_count + zip_count=0 + fi + done + + # set result + if [ 1 = $zip_count ]; then + _find_filename=$(ls ${_search_dir}/$1*.zip) + _extract_mode=${_MODE_ZIP} + elif [ 1 = $tar_count ]; then + _find_filename=$(ls ${_search_dir}/$1*.tar.*) + _extract_mode=${_MODE_TAR} + elif [ 1 = $crypto_zip_count ]; then + _find_filename=$(ls ${_search_dir}/$1*.zip) + _extract_mode=${_MODE_CRYPTO_ZIP} + else + _find_filename="" + fi +} + +# $1: Mode +# $2: archive file name +func_cmn_extract_archive() +{ + case $1 in + $_MODE_ZIP) +# echo "Zip mode" + unzip -oq $2 + ;; + $_MODE_TAR) +# echo "Tar mode" + tar xf $2 + ;; + $_MODE_CRYPTO_ZIP) +# echo "Crypto Zip mode" + unzip -oq $2 + top_dir=$(basename $2) + top_dir=${top_dir%.*} + cd ${top_dir} + unzip -oq *.zip + if [ $? -gt 0 ]; then + func_error "ERROR: FAILED ZIP PASSWORD" + fi + cd ${TMPWORK} + ;; + *) + func_error "ERROR: func_cmn_extract_archive: mode error." + exit 1 + ;; + esac +} + +# $1: set target filename. +# $2: set MD5 expectation value. +func_cmn_md5_check() +{ + _md5_func_param_filename=$1 + _md5_func_param_expectation=$2 + if [ ! -e ${_md5_func_param_filename} ]; then + func_error "func_cmn_md5_check : ERROR ${_md5_func_param_filename} not found." + fi + + _calc_md5=$(md5sum ${_md5_func_param_filename} | cut -d " " -f1) + + if [ -n "${_no_md5check}" ] || [ -z ${_md5_func_param_expectation} ]; then + echo "Skip MD5 : `basename ${_md5_func_param_filename}`" + return + fi + + if [ -n "${_debug}" ]; then + echo "MD5 target file = ${_md5_func_param_filename}" + echo "calc_md5 = ${_calc_md5}" + echo "expect_value = ${_md5_func_param_expectation}" + fi + + if [ ${_calc_md5} = ${_md5_func_param_expectation} ]; then + echo "MD5 OK : `basename ${_md5_func_param_filename}`" + else + echo "calc_md5 = ${_calc_md5}" + echo "expect_value = ${_md5_func_param_expectation}" + func_error "MD5 ERROR : ${_md5_func_param_filename}" + fi +} + +##### Error function +# $1: error message +func_error() +{ + echo "$1" + # cleanup temp directory. + func_clean_tempdir + exit 1 +} + +##### cleanup temp directory +func_clean_tempdir() +{ + echo "cleanup temp directory" + rm -rf ${TMPWORK} +} + +##### Template function for Single package + +# $1: package name +# $2: search target filename +# $3: search directory (full path) +# return +# _find_filename : the found file (full path) +# _extract_top_dir_name +func_search_file_in_package() +{ + # search package file + func_cmn_find_file $1 $3 + if [ -n "${_debug}" ]; then + echo "" + echo "FileName = ${_find_filename}" + echo "Mode = ${_extract_mode}" + fi + + if [ -z "${_find_filename}" ]; then + return + fi + + # extract + func_cmn_extract_archive ${_extract_mode} "${_find_filename}" + + # Get directory name + # {PATH}/Package_Version.tar.gz or XXXX.zip --> Package_Version + top_dir=$(basename ${_find_filename}) + top_dir=${top_dir%.*} + + # search file + num=`find ${top_dir} -name $2 | wc -l` + if [ ${num} -eq 1 ]; then + _find_filename=`find ${top_dir} -name $2` + else + # same filename exists. + _find_filename=`find ${top_dir} -name $2 | grep Software` + fi + + # set mode + if [ `echo ${_find_filename} | grep '\.'zip` ]; then + _extract_mode=${_MODE_ZIP} + else + _extract_mode=${_MODE_TAR} + fi + + # set return value + _extract_top_dir_name=${top_dir} +} + +# $1: package name +# $2: copy filename (md5 target) +# $3: expect MD5 value +# $4: search directory (full path) +# return +# _find_file_name +# _extract_top_dir_name +func_search_and_md5check() +{ + # search package file + func_cmn_find_file $1 $4 + if [ -n "${_debug}" ]; then + echo "" + echo "FileName = ${_find_filename}" + echo "Mode = ${_extract_mode}" + fi + + if [ -z "${_find_filename}" ]; then + return + fi + + # extract + func_cmn_extract_archive ${_extract_mode} "${_find_filename}" + + # MD5 + # Get directory name + # {PATH}/Package_Version.tar.gz or XXXX.zip --> Package_Version + top_dir=$(basename ${_find_filename}) + top_dir=${top_dir%.*} + + # call func_cmn_md5_check +# func_cmn_md5_check "${top_dir}/$1/Software/$2" "$3" + + # set return value + _extract_top_dir_name=${top_dir} +} + +##### Template function for Group package +# $1: group package name +# $2: single package name +# $3: copy filename (md5 target) +# $4: expect MD5 value +# $5: search directory (full path) +# return +# _find_file_name +# _extract_top_dir_name +# +# NOTE) This function support level1 packaging. "grp pkg in grp pkg" dose note support. +func_search_and_md5check_grp() +{ + # search group package @SRCDIR + func_cmn_find_file $1 $5 + if [ -n "${_debug}" ]; then + echo "search group package" + echo "FileName = ${_find_filename}" + echo "Mode = ${_extract_mode}" + echo "" + fi + + if [ -z "${_find_filename}" ]; then + return + fi + + # extract group package @TMPWORK + func_cmn_extract_archive ${_extract_mode} "${_find_filename}" + + cd ${_find_filename} + # check group pachage structure + # _/Package_Info.txt + top_dir=$(basename ${_find_filename}) + top_dir=${top_dir%.*} + + if [ ! -e ${top_dir}/Package_Info.txt ]; then + echo "grp package = $1" + echo "single package = $2" + func_error "ERROR: Package_Info.txt not found in Group package." + fi + + # search single package @TMPWORK/TOPDIR// + func_cmn_find_file $2 "${TMPWORK}/${top_dir}/$1" + if [ -n "${_debug}" ]; then + echo "search single package" + echo "FileName = ${_find_filename}" + echo "Mode = ${_extract_mode}" + echo "" + fi + + if [ -z "${_find_filename}" ]; then + return + fi + + # mv TMPWORK/. + mv ${_find_filename} ${TMPWORK}/. + + # delete group package + rm -rf ${TMPWORK}/${top_dir} + + # call search and md5check @TMPWORK + func_search_and_md5check $2 $3 $4 ${TMPWORK} +} + +##### File search and MD5check for Package list +# $1: package list +# $2: rigid flag (1: true, other: false) +# +# return +# 1: [Success] One or more files were found. +# 0: [Fail] File not found +# +# package list format +# list =",,, \ +# ,,, \ +# ,,," +# +# Note) Don't use space in xxx_name. +# Note) md5_variable_name is defined in md5list.txt. +# Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO +# It is omissible. The default is "_MD5_". +func_list_search_and_md5check () +{ + find_flag=0 + + for i in $1 + do + sw_name=`echo $i | cut -d "," -f 1` + pkg_name=`echo $i | cut -d "," -f 2` + copyfile_name=`echo $i | cut -d "," -f 3` + md5_val=`echo $i | cut -d "," -f 4` + + # is empty. Default MD5 name is "_MD5_" + if [ -z "${md5_val}" ]; then + md5_val=`eval echo '$_MD5_'${pkg_name}` + else + md5_val=`eval echo '$_MD5_'${md5_val}` + fi + + if [ -n "${_debug}" ]; then + echo "" + echo "sw_name = $sw_name" + echo "pkg_name = $pkg_name" + echo "copyfile_name = $copyfile_name" + echo "md5_val = $md5_val" + fi + + func_search_and_md5check "${pkg_name}" "${copyfile_name}" "${md5_val}" "${_src_full}" + if [ -z "${_find_filename}" ]; then + echo "${sw_name} not found!" + # rigid flag = TRUE. Not found = ERROR + if [ "X$2" = "X1" ]; then + return 0 + fi + else + find_flag=1 + fi + done + + return ${find_flag} +} + +##### File search and install (without MD5check) for Package list +# +# $1: package list +# $2: install directory +# +# return +# 1: [Success] One or more files were installed. +# 0: [Fail] File not found +# +# package list format +# list =",,, \ +# ,,, \ +# ,,," +# +# Note) Don't use space in xxx_name. +# Note) md5_variable_name is defined in md5list.txt. +# Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO +# It is omissible. The default is "_MD5_". +func_list_search_and_install_wo_md5check() +{ + find_flag=0 + + for i in $1 + do + sw_name=`echo $i | cut -d "," -f 1` + pkg_name=`echo $i | cut -d "," -f 2` + copyfile_name=`echo $i | cut -d "," -f 3` + md5_val=`echo $i | cut -d "," -f 4` + + # is empty. Default MD5 name is "_MD5_" + if [ -z "${md5_val}" ]; then + md5_val=`eval echo '$_MD5_'$pkg_name` + else + md5_val=`eval echo '$_MD5_'${md5_val}` + fi + + copyfile_name=$(basename ${copyfile_name}) + + if [ -n "${_debug}" ]; then + echo "" + echo "sw_name = $sw_name" + echo "pkg_name = $pkg_name" + echo "copyfile_name = $copyfile_name" + echo "md5_val = $md5_val" + fi + + # file search + func_search_file_in_package "${pkg_name}" "${copyfile_name}" "${_src_full}" + if [ -z "${_find_filename}" ]; then + echo "${sw_name} not found!" + else + find_flag=1 + + # install + install -d $2 + install -m 0644 ${_find_filename} $2 + echo "Installed $sw_name" + echo " : ${pkg_name}" + fi + done + + return ${find_flag} +} + +##### File search and install for Package list +# +# $1: package list +# $2: install directory +# +# return +# 1: [Success] One or more files were installed. +# 0: [Fail] File not found +# +# package list format +# list =",,, \ +# ,,, \ +# ,,," +# +# Note) Don't use space in xxx_name. +# Note) md5_variable_name is defined in md5list.txt. +# Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO +# It is omissible. The default is "_MD5_". +func_list_search_and_install() +{ + find_flag=0 + + for i in $1 + do + sw_name=`echo $i | cut -d "," -f 1` + pkg_name=`echo $i | cut -d "," -f 2` + copyfile_name=`echo $i | cut -d "," -f 3` + md5_val=`echo $i | cut -d "," -f 4` + + # is empty. Default MD5 name is "_MD5_" + if [ -z "${md5_val}" ]; then + md5_val=`eval echo '$_MD5_'$pkg_name` + else + md5_val=`eval echo '$_MD5_'${md5_val}` + fi + + if [ -n "${_debug}" ]; then + echo "" + echo "sw_name = $sw_name" + echo "pkg_name = $pkg_name" + echo "copyfile_name = $copyfile_name" + echo "md5_val = $md5_val" + fi + + # seach & MD5 check + func_search_and_md5check "${pkg_name}" "${copyfile_name}" "${md5_val}" "${_src_full}" + if [ -z "${_find_filename}" ]; then + echo "${sw_name} not found!" + else + find_flag=1 + + # Get directory name + # _find_filename = pkg file (full path). It is not copyfile. + top_dir=$(basename ${_find_filename}) + top_dir=${top_dir%.*} + + # install + install -d $2 + install -m 0644 ${top_dir}/${pkg_name}/Software/${copyfile_name} $2 + echo "Installed $sw_name" + echo " : ${pkg_name}" + fi + done + + return ${find_flag} +} + +##### Package function + +# For 3D graphics packages +func_gfx() +{ + echo "" + echo "Copying for Graphic Packages" + + copy_flag=0 + + for i in ${_gfx_list} + do + user_pkg_name=`echo $i | cut -d "," -f 1` + user_copyfile_name=`echo $i | cut -d "," -f 2` + user_md5_val=`eval echo '$_MD5_'${user_pkg_name}` + kern_pkg_name=`echo $i | cut -d "," -f 3` + kern_copyfile_name=`echo $i | cut -d "," -f 4` + kern_md5_val=`eval echo '$_MD5_'${kern_pkg_name}` + + if [ -n "${_debug}" ]; then + echo "" + echo "user_pkg_name = ${user_pkg_name}" + echo "user_copyfile_name= ${user_copyfile_name}" + echo "user_md5_val = ${user_md5_val}" + echo "kern_pkg_name = ${kern_pkg_name}" + echo "kern_copyfile_name= ${kern_copyfile_name}" + echo "kern_md5_val = ${kern_md5_val}" + fi + + # user module (file1) + func_search_and_md5check "${user_pkg_name}" "${user_copyfile_name}" "${user_md5_val}" "${_src_full}" + + if [ -z "${_find_filename}" ]; then + echo "${user_pkg_name} not found!" + continue + fi + + file1_top_dir=${_extract_top_dir_name} + echo "file1 top : ${file1_top_dir}" + + # kernel module (file2) + func_search_and_md5check "${kern_pkg_name}" "${kern_copyfile_name}" "${kern_md5_val}" "${_src_full}" + + # file1 exist, but file2 not exist + if [ -z "${_find_filename}" ]; then + func_error "ERROR: func_gfx: package file for Graphic is incomplete." + fi + + file2_top_dir=${_extract_top_dir_name} + echo "file2 top : ${file2_top_dir}" + + # Finally copy is performed + copy_flag=1 + install -d ${_GFX_UM_INST_DIR} + install -m 0644 ${file1_top_dir}/${user_pkg_name}/Software/${user_copyfile_name} ${_GFX_UM_INST_DIR}/`echo ${user_copyfile_name} | cut -b 5-200` + install -d ${_GFX_KM_INST_DIR} + install -m 0644 ${file2_top_dir}/${kern_pkg_name}/Software/${kern_copyfile_name} ${_GFX_KM_INST_DIR} + echo "Installed GFX package" + echo " : ${user_pkg_name}" + echo " : ${kern_pkg_name}" + echo "" + done + + if [ ${copy_flag} -eq 0 ]; then + return + fi + + echo "" + echo "Packages for GFX module were found and copied." + echo /=======================================================/ +} + +##### For Multi Media + +# For Audio library copy +# +# Global +# _audio_list: audio library list +# Return +# 0: Not found +# 1: Success +func_audio_lib() +{ + # MD5 check: OMX Media Component Audio Common Library for Linux + func_list_search_and_md5check "${_audio_common_list}" "1" + if [ $? -eq 0 ]; then + echo "Audio Common Library not found!" + echo "" + return 0 + fi + + # MD5 check: audio library. + func_list_search_and_md5check "${_audio_list}" + if [ $? -eq 0 ]; then + # library not found. + echo "" + echo "Audio library not found." + return 0 + fi + + # Add audio common library to list + _audio_list="${_audio_common_list} ${_audio_list}" + + # Install omx common lib (if not installed) + func_install_omx_common + + # Install Audio library packages + func_list_search_and_install_wo_md5check "${_audio_list}" "${_OMX_UM_INST_DIR}" + _audio_common_install=1 + + return 1 +} + +# For Audio library +func_audio() +{ + echo "" + echo "Copying for Audio Common Packages" + + _audio_common_install=0 + + # Audio requires OMX common library + if [ ${_omx_common_install} -eq 0 ]; then + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_omx_common_list}" "1" + if [ $? -eq 0 ]; then + echo "OMX Common Library not found!" + echo "" + return + fi + else + echo "OMX Common Library already installed" + fi + + # Audio Library + func_audio_lib + if [ $? -eq 0 ]; then + echo "" + echo "Skip Audio Packages" + echo "" + return + fi + + echo "" + echo "Packages for Audio module were found and copied." + echo /=======================================================/ +} + +# For Audio M/W +# Global +# _audio_mw_list: audio M/W library list +# Return +# 0: Not found +# 1: Success +func_audio_mw() +{ + echo "" + echo "Copying for Audio M/W Packages" + + # MD5 check + func_list_search_and_md5check "${_audio_mw_list}" + if [ $? -eq 0 ]; then + # library not found. + echo "" + echo "Packages for Audio M/W module were not found." + return 0 + fi + + # Install Audio M/W library packages + func_list_search_and_install_wo_md5check "${_audio_mw_list}" "${_OMX_UM_INST_DIR}" + + echo "" + echo "Packages for Audio M/W module were found and copied." + echo /=======================================================/ + + return 1 +} + +# install OMX common library +func_install_omx_common() +{ + if [ ${_omx_common_install} -eq 0 ]; then + echo "" + echo "Install for OMX Common Packages" + func_list_search_and_install_wo_md5check "${_omx_common_list}" "${_OMX_UM_INST_DIR}" + _omx_common_install=1 + fi +} + +# install uvcs driver +func_install_uvcs() +{ + if [ ${_uvcs_install} -eq 0 ]; then + echo "" + echo "Installed UVCS driver" + func_list_search_and_install_wo_md5check "${_uvcs_list}" "${_UVCS_INST_DIR}" + _uvcs_install=1 + fi +} + +# search & MD5 check for OMX Video Decoder library +# Global +# _video_dec_list: video decoder list +# Return +# 0: Not found +# 1: Success +func_video_decoder_lib() +{ + echo "" + echo "Copying for Video Decoder Library Packages" + + # MD5 check: Decoder Common Library (rigid flag=TRUE) + func_list_search_and_md5check "${_video_dec_common_list}" "1" + if [ $? -eq 0 ]; then + echo "OMX Video Decoder Common Library not found!" + return 0 + fi + + # MD5 check: Video Decoder Library + func_list_search_and_md5check "${_video_dec_list}" + if [ $? -eq 0 ]; then + # library not found. + return 0 + fi + + # install OMX common lib (if not installed) + func_install_omx_common + + # install UVCS driver (if not installed) + func_install_uvcs + + # Add video decoder common lib to list + _video_dec_list="${_video_dec_common_list} ${_video_dec_list}" + + # install searched library + func_list_search_and_install_wo_md5check "${_video_dec_list}" "${_OMX_UM_INST_DIR}" + _video_decoder_common_install=1 + + return 1 +} + +# search & MD5 check for OMX Video Encoder library +# Global +# _video_enc_list: video encoder list +# Return +# 0: Not found +# 1: Success +func_video_encoder_lib() +{ + echo "" + echo "Copying for Video Encoder Library Packages" + + + # MD5 check Encoder Common Library (rigid flag=TRUE) + func_list_search_and_md5check "${_video_enc_common_list}" "1" + if [ $? -eq 0 ]; then + echo "OMX Video Encoder Common Library not found!" + return 0 + fi + _video_encoder_common_install=0 + + # Video Encoder Library + # MD5 check + func_list_search_and_md5check "${_video_enc_list}" + if [ $? -eq 0 ]; then + # library not found. + return 0 + fi + + # install common lib (if not installed) + func_install_omx_common + + # install UVCS driver (if not installed) + func_install_uvcs + + # Add Video encoder common library to list + _video_enc_list="${_video_enc_common_list} ${_video_enc_list}" + + # install searched library + func_list_search_and_install_wo_md5check "${_video_enc_list}" "${_OMX_UM_INST_DIR}" + _video_encoder_common_install=1 + + return 1 +} + +# For Video decoder +# Global +# _video_dec_list: video decoder list +# Return +# 0: Not found +# 1: Success +func_video_decoder() +{ + echo "" + echo "Copying for Video Decoder Packages" + + # OMX Common library + if [ ${_omx_common_install} -eq 0 ]; then + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_omx_common_list}" "1" + if [ $? -eq 0 ]; then + echo "OMX Common Library not found!" + echo "" + return + fi + else + echo "OMX Common Library already installed" + fi + + # UVCS driver + if [ ${_uvcs_install} -eq 0 ]; then + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_uvcs_list}" "1" + if [ $? -eq 0 ]; then + echo "UVCS driver not found!" + echo "" + return + fi + else + echo "UVCS driver already installed" + fi + + # OMX Decoder + # Decoder common Lib + func_video_decoder_lib + if [ $? -eq 0 ]; then + echo "" + echo "Skip Video Decoder Packages" + echo "" + return + fi + + echo "" + echo "Packages for video decoder module were found and copied." + echo /=======================================================/ +} + +# For Video encoder +func_video_encoder() +{ + echo "" + echo "Copying for Video Encoder Packages" + + # OMX Common library + if [ ${_omx_common_install} -eq 0 ]; then + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_omx_common_list}" "1" + if [ $? -eq 0 ]; then + echo "OMX Common Library not found!" + echo "" + return + fi + else + echo "OMX Common Library already installed" + fi + + # UVCS driver + if [ ${_uvcs_install} -eq 0 ]; then + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_uvcs_list}" "1" + if [ $? -eq 0 ]; then + echo "UVCS driver not found!" + echo "" + return + fi + else + echo "UVCS driver already installed" + fi + + # OMX Encoder + # Encoder common Lib + func_video_encoder_lib + if [ $? -eq 0 ]; then + echo "" + echo "Skip Video Encoder Packages" + echo "" + return + fi + + echo "" + echo "Packages for video encoder module were found and copied." + echo /=======================================================/ +} + +# For DTV kernel module +func_dtv_kern() +{ + echo "" + echo "Copying for DTV kernel module" + + _dtv_kern_install=0 + + func_list_search_and_md5check "${_dtv_km_list}" + if [ $? -eq 0 ]; then + # library not found. + echo "" + echo "DTV kernel library not found!" + return + fi + + pkg_name=`echo ${_dtv_km_list} | cut -d "," -f 2` + copyfile_name=`echo ${_dtv_km_list} | cut -d "," -f 3` + + # extract --> archive --> copied + echo "Installed DTV kernel modules" + func_search_file_in_package "${pkg_name}" "${copyfile_name}" "${_src_full}" + func_cmn_extract_archive "${_extract_mode}" "${_find_filename}" + + dtv_driver_list="ssp_drv scu_src_drv tsif_drv tddmac_drv" + for i in ${dtv_driver_list} + do + tar cfz $i.tar.gz $i + install -d ${_DTV_KM_INST_DIR} + install -m 644 $i.tar.gz ${_DTV_KM_INST_DIR} + echo " : $i.tar.gz" + done + + _dtv_kern_install=1 + + echo "" + echo "DTV kernel module were found and copied." + echo /=======================================================/ +} + +# For DTV lib +func_dtv_lib() +{ + echo "" + echo "Copying for DTV Library Packages" + + # DTV kernel modules + if [ ${_dtv_kern_install} -eq 0 ]; then + echo "DTV kernel module not found!" + echo "Skip DTV Package" + echo "" + return + fi + + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_dtv_um_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "" + echo "DTV library not found" + return + fi + + # install + func_list_search_and_install_wo_md5check "${_dtv_um_list}" "${_DTV_UM_INST_DIR}" + + echo "" + echo "DTV Package were found and copied." + echo /=======================================================/ +} + +# For DVD lib +func_dvd_lib() +{ + echo "" + echo "Copying for DVD Library Packages" + + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_dvd_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "" + echo "DVD library not found" + return + fi + + # install searched library + func_list_search_and_install_wo_md5check "${_dvd_list}" "${_DVD_UM_INST_DIR}" + + echo "" + echo "DVD Package were found and copied." + echo /=======================================================/ +} + +# For DTV/DVD main routine +func_dtv_dvd() +{ + echo "" + echo "Copying for DTV/DVD Packages" + + # DTV/DVD requires OMX Video Decoder + if [ ${_video_decoder_common_install} -eq 0 ]; then + echo "Video Decoder Library not found!" + echo "Skip DTV/DVD Package" + echo "" + return + fi + + # DTV requires Audio Decoder + if [ ${_audio_common_install} -eq 0 ]; then + echo "Audio Common Library not found!" + echo "Skip DTV Package" + echo "" + else + # DTV package + func_dtv_kern + func_dtv_lib + fi + + # DVD package + func_dvd_lib +} + +# For CMS main routine +func_cms() +{ + echo "" + echo "Copying for CMS Packages" + + copy_flag=0 + + # MD5 check + func_list_search_and_md5check "${_cms_list}" + if [ $? -eq 0 ]; then + # library not found. + echo "Skip CMS package" + echo "" + return + fi + + # Install library + func_list_search_and_install_wo_md5check "${_cms_list}" "${_CMS_UM_INST_DIR}" + + echo "" + echo "Packages for CMS were found and copied." + echo /=======================================================/ +} + +# For ADSP main routine +func_adsp() +{ + echo "" + echo "Copying for ADSP Packages" + + # MD5 check (rigid flag = TRUE) + # In ADSP, all files are necesarry + func_list_search_and_md5check "${_adsp_km_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "Skip ADSP Package" + echo "" + return + fi + + func_list_search_and_md5check "${_adsp_um_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "Skip ADSP Package" + echo "" + return + fi + + # Install kernel module + func_list_search_and_install_wo_md5check "${_adsp_km_list}" "${_ADSP_KM_INST_DIR}" + + # Install user module + func_list_search_and_install_wo_md5check "${_adsp_um_list}" "${_ADSP_UM_INST_DIR}" + + echo "" + echo "Packages for ADSP were found and copied." + echo /=======================================================/ +} + +# For ICCOM main routine +func_iccom() +{ + echo "" + echo "Copying for ICCOM Packages" + + # MD5 check (rigid flag = TRUE) + # In ICCOM, all files are necesarry + func_list_search_and_md5check "${_iccom_km_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "Skip ICCOM Package" + echo "" + return + fi + + func_list_search_and_md5check "${_iccom_um_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "Skip ICCOM Package" + echo "" + return + fi + + # Install kernel module + func_list_search_and_install_wo_md5check "${_iccom_km_list}" "${_ICCOM_KM_INST_DIR}" + + # Install user module + func_list_search_and_install_wo_md5check "${_iccom_um_list}" "${_ICCOM_UM_INST_DIR}" + + echo "" + echo "Packages for ICCOM were found and copied." + echo /=======================================================/ +} + +################################ +# Copy Script Main routine +################################ +echo "Copyscript for R-Car Gen3" +echo +#### 1) Checking current directory +if [ ! -d meta-rcar-gen3 ]; then + echo "ERROR: Please extract meta-renesas and cd to it, before execute $0" + exit 1 +fi + +#### 2) Checking Arguments +if [ "X$1" = "X" ]; then + usage + exit 1 +fi + +while [ $# -gt 0 ] ; do + case "$1" in + -f|--force) + _no_md5check=1 + ;; + -d|--debug) + _debug=1 + ;; + *) + _src_dirname=$(basename $1) + _src_path=$(cd $(dirname $1) && pwd) + _src_full=${_src_path}/${_src_dirname} + ;; + esac + shift +done + +#### 3) Checking ClickThrough present +if [ ! -f ${_src_full}/R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-*.tar.gz ]; then + echo "R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-*.tar.gz not found!" + usage + exit 1 +fi +if [ ! -f ${_src_full}/R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-*.tar.gz ]; then + echo "R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-*.tar.gz not found!" + usage + exit 1 +fi + +tar -C ${_src_full} -zxf ${_src_full}/R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-*.tar.gz --strip-components 2 +tar -C ${_src_full} -zxf ${_src_full}/R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-*.tar.gz --strip-components 2 + +# source directory check +if [ ! -d ${_src_path}/${_src_dirname} ]; then + echo "${_src_path}/${_src_dirname} not found." + usage + exit 1 +fi + +if [ -n "${_debug}" ]; then + echo "src = ${_src_dirname}" + echo "src_path = ${_src_path}" + echo "src_full = ${_src_full}" + echo "no_md5check = ${_no_md5check}" + echo "" +fi + +##### 3) create temp directory +TMPWORK=${PWD}/CP_SCRIPT_TEMP +if [ -d ${TMPWORK} ]; then + echo "ERROR: Work directory already exist." + exit 1 +fi +install -d -m 700 ${TMPWORK} +cd ${TMPWORK} + +##### 4) copy +# initialize flag +_omx_common_install=0 +_uvcs_install=0 +_audio_common_install=0 +_video_decoder_common_install=0 +_video_encoder_common_install=0 +_dtv_kern_install=0 + +func_gfx +func_audio +func_audio_mw +func_video_decoder +func_video_encoder +func_dtv_dvd +func_cms +func_adsp +func_iccom + +##### 5) cleanup temp directory +func_clean_tempdir + +##### End +echo "Complete copying !" diff --git a/meta-rcar-gen3/docs/sample/copyscript/copy_proprietary_softwares.sh b/meta-rcar-gen3/docs/sample/copyscript/copy_proprietary_softwares.sh new file mode 100755 index 0000000..3a100e1 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/copyscript/copy_proprietary_softwares.sh @@ -0,0 +1,1330 @@ +#!/bin/sh + +# Copyright (C) Renesas Electronics Corporation 2015 All rights reserved. + +usage() +{ +cat << EOF + usage: `basename $0` [-f] [-d] source-directory + -f: fource copy. ignore md5check + -d: debug mode + + Ex) + `basename $0` -f my_package_dir +EOF +} + +##### MD5 list ##### +. `dirname $0`/md5list.txt + +##### Library List ##### +# Audio Library +# Please add omx audio library to "_audio_list" +# Don't use space in xxx_name. +# audio_list=",, \ +# ,, \ +# ,," +_audio_list="AAC-LC_decoder_lib,RTM0AC0000XAAACD30SL40C,RTM0AC0000XAAACD30SL40C.tar.gz \ + aacPlusV2_decoder_lib,RTM0AC0000XAAAPD30SL40C,RTM0AC0000XAAAPD30SL40C.tar.gz \ + MP3_decoder_lib,RTM0AC0000XAMP3D30SL40C,RTM0AC0000XAMP3D30SL40C.tar.gz \ + WMA_decoder_lib,RTM0AC0000XAWMAD30SL40C,RTM0AC0000XAWMAD30SL40C.tar.gz \ + AAC-LC_encoder_lib,RTM0AC0000XAAACE30SL40C,RTM0AC0000XAAACE30SL40C.tar.gz \ + ALAC_decoder_lib,RTM0AC0000XAALAD30SL40C,RTM0AC0000XAALAD30SL40C.tar.gz \ + FLAC_decoder_lib,RTM0AC0000XAFLAD30SL40C,RTM0AC0000XAFLAD30SL40C.tar.gz \ + Dolby_decoder_lib,RTM0AC0000XADD5D30SL40C,RTM0AC0000XADD5D30SL40C.tar.gz" + +# Audio M/W Library +# Please add omx audio library to "_audio_mw_list" +# Don't use space in xxx_name. +# audio_mw_list=",, \ +# ,, \ +# ,," +_audio_mw_list="AAC-LC_decoder_M/W,RTM0AC0000ADAACMZ1SL40C,RTM0AC0000ADAACMZ1SL40C.tar.gz \ + aacPlusV2_decoder_M/W,RTM0AC0000ADAAPMZ1SL40C,RTM0AC0000ADAAPMZ1SL40C.tar.gz \ + MP3_decoder_M/W,RTM0AC0000ADMP3MZ1SL40C,RTM0AC0000ADMP3MZ1SL40C.tar.gz \ + WMA_decoder_M/W,RTM0AC0000ADWMAMZ1SL40C,RTM0AC0000ADWMAMZ1SL40C.tar.gz \ + AAC-LC_encoder_M/W,RTM0AC0000AEAACMZ1SL40C,RTM0AC0000AEAACMZ1SL40C.tar.gz \ + DDD_decoder_M/W,RTM0AC0000ADDD5MZ1SL40C,RTM0AC0000ADDD5MZ1SL40C.tar.gz" + +# Video Decoder Library +# Please add omx video decoder library to "_video_dec_list" +# Don't use space in xxx_name. +# video_dec_list=",, \ +# ,, \ +# ,," +_video_dec_list="H263_decoder,RTM0AC0000XV263D30SL40C,RTM0AC0000XV263D30SL40C.tar.bz2 \ + H264_decoder,RTM0AC0000XV264D30SL40C,RTM0AC0000XV264D30SL40C.tar.bz2 \ + H265_decoder,RTM0AC0000XV265D30SL40C,RTM0AC0000XV265D30SL40C.tar.bz2 \ + MPEG2_decoder,RTM0AC0000XVM2VD30SL40C,RTM0AC0000XVM2VD30SL40C.tar.bz2 \ + MPEG4_decoder,RTM0AC0000XVM4VD30SL40C,RTM0AC0000XVM4VD30SL40C.tar.bz2 \ + VC1_decoder,RTM0AC0000XVVC1D30SL40C,RTM0AC0000XVVC1D30SL40C.tar.bz2 \ + DivX_decoder,RTM0AC0000XVDVXD30SL40C,RTM0AC0000XVDVXD30SL40C.tar.bz2 \ + RealVideo_decoder,RTM0AC0000XVRLVD30SL40C,RTM0AC0000XVRLVD30SL40C.tar.bz2" + +# Video Encoder Library +# Please add omx video encoder library to "_video_enc_list" +# Don't use space in xxx_name. +# video_enc_list=",, \ +# ,, \ +# ,," +_video_enc_list="H264_encoder,RTM0AC0000XV264E30SL40C,RTM0AC0000XV264E30SL40C.tar.bz2" + +# Common library packages +# Don't use space in xxx_name. +# XXX_list=",, \ +# ,, \ +# ,," +_omx_common_list="omx_common_lib,RTM0AC0000XCMCTL30SL40C,RTM0AC0000XCMCTL30SL40C.tar.bz2" +_uvcs_list="uvcs_lib,RCG3VUDRL4001ZDO,RCG3VUDRL4001ZDO.tar.bz2" +_video_enc_common_list="video_enc_common,RTM0AC0000XVCMNE30SL40C,RTM0AC0000XVCMNE30SL40C.tar.bz2" +_video_dec_common_list="video_dec_common,RTM0AC0000XVCMND30SL40C,RTM0AC0000XVCMND30SL40C.tar.bz2" +_audio_common_list="audio_common,RTM0AC0000XACMND30SL40C,RTM0AC0000XACMND30SL40C.tar.gz" + + +# DTV Library +# Please add DTV library to "_dtv_list" +# Don't use space in xxx_name. +# dtv_xx_list=",,, \ +# ,,, \ +# ,,," +_dtv_km_list="dtv_km,RCG3T001L4001ZDO,Software.tar.gz" +_dtv_um_list="dtv_lib,RTM0RC0000TE020000SL40C,Software.tar.gz,RTM0RC0000TE020000SL40C1 \ + dtv_userfunc,RTM0RC0000TE020000SL40C,../Reference/Reference.tar.gz,RTM0RC0000TE020000SL40C2" + +# DVD Library +# Please add DVD library to "_dvd_list" +# Don't use space in xxx_name. +# dvd_list=",,, \ +# ,,, \ +# ,,," +_dvd_list="dvd_lib,RTM0RC0000XDVDC301SL40C,Software.tar.gz" + +# CMS Library +# Please add CMS library to "_cms_list" +# Don't use space in xxx_name. +# cms_list=",, \ +# ,, \ +# ,," +_cms_list="bcm,RTM0AC0000JRCMBCV0SL40C,RTM0AC0000JRCMBCV0SL40C.tar.gz \ + blc,RTM0AC0000JRCMBLC0SL40C,RTM0AC0000JRCMBLC0SL40C.tar.gz \ + dgc,RTM0AC0000JRCMDGV0SL40C,RTM0AC0000JRCMDGV0SL40C.tar.gz" + +# ADSP +# Please add ADSP to "_adsp_list" +# Don't use space in xxx_name. +# adsp_xx_list=",, \ +# ,, \ +# ,," +_adsp_um_list="adsp_fw,RCG3AHFWN0101ZDP,RCG3AHFWN0101ZDP.tar.gz \ + adsp_if,RCG3AHIFL4001ZDP,RCG3AHIFL4001ZDP.tar.gz" +_adsp_km_list="adsp_driver,RCG3AHPDL4001ZDO,RCG3AHPDL4001ZDO.tar.gz" + +# GFX +# Please add GFX to "_gfx_list" +# Don't use space in xxx_name. +# gfx_list=",,, \ +# ,,, \ +# ,,," +_gfx_list="RTM0RC7795GLTG0001SL40C,r8a7795_linux_gsx_binaries_gles3.tar.bz2,RCH3G001L4001ZDO,GSX_KM_H3.tar.bz2 \ + RTM0RC7796GLTG0001SL40C,r8a7796_linux_gsx_binaries_gles3.tar.bz2,RCM3G001L4001ZDO,GSX_KM_M3.tar.bz2 \ + INFRTM0RC7795GLTG0001SL40C,INF_r8a7795_linux_gsx_binaries_gles3.tar.bz2,RCH3G001L4001ZDO,GSX_KM_H3.tar.bz2 \ + INFRTM0RC7796GLTG0001SL40C,INF_r8a7796_linux_gsx_binaries_gles3.tar.bz2,RCM3G001L4001ZDO,GSX_KM_M3.tar.bz2" + +# ICCOM +# Please add ICCOM to "_iccom_list" +# Don't use space in xxx_name. +# iccom_xx_list=",,, \ +# ,,, \ +# ,,," +_iccom_km_list="iccom_mfis,RCG3ZLIDL4001ZNO,iccom-mfis.tar.bz2,RCG3ZLIDL4001ZNO1 \ + iccom_sample,RCG3ZLIDL4001ZNO,iccom-hwspinlock-sample.tar.bz2,RCG3ZLIDL4001ZNO2" +_iccom_um_list="iccom_lib,RCG3ZLILL4001ZNO,libiccom.tar.bz2,RCG3ZLILL4001ZNO" + +# Crypto Packgae list +# Please add crypto (zip) package name to "_crypto_pkg_list" +# Don't use space in xxx_name. +# crypto_pkg_list=" " +_crypto_pkg_list="RTM0AC0000ADDD5MZ1SL40C" + +##### static value +_MODE_ZIP=1 +_MODE_TAR=2 +_MODE_CRYPTO_ZIP=3 +_GFX_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-gles/kernel-module-gles" +_GFX_UM_INST_DIR="../meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module" +_UVCS_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-uvcs/kernel-module-uvcs-drv" +_OMX_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/omx-module/omx-user-module" +_DTV_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-dtv/files" +_DTV_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/dtv-module/dtv-user-module" +_DVD_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/dvd-module/dvd-user-module" +_CMS_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/cms-module/cms-user-module" +_ADSP_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-adsp/xtensa-hifi" +_ADSP_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/adsp-module/files" +_ICCOM_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-iccom/files" +_ICCOM_UM_INST_DIR="../meta-rcar-gen3/recipes-connectivity/iccom-module/files" + +##### common function + +# $1: search file name +# $2: search directory +# return global variable +# _find_filename: find filename +# _extract_mode: _MODE_ZIP or _MODE_TAR +func_cmn_find_file() +{ +# echo "$1" +# echo "$2" + if [ -z "$1" ]; then + func_error "ERROR: func_cmn_find_file: empty filename" + fi + + if [ -z "$2" ]; then + _search_dir=${_src_full} + else + _search_dir=$2 + fi + + # search zip file +# zip_count=`find ${_search_dir} -maxdepth 1 -name "$1*.zip" | wc -l` + zip_count=`ls ${_search_dir}/$1*.zip 2>/dev/null | wc -l` + + # search tar file +# tar_count=`find ${_search_dir} -maxdepth 1 -name "$1*.tar.*" | wc -l` + tar_count=`ls ${_search_dir}/$1*.tar.* 2>/dev/null | wc -l` + + # duplicate file check + if [ 1 -lt `expr $zip_count + $tar_count` ]; then + echo "file1_zip = $zip_count" + echo "file1_tar = $tar_count" + func_error "ERROR: $1: too many files" + fi + + crypto_zip_count=0 + for i in ${_crypto_pkg_list} + do + if [ $1 = $i ]; then + crypto_zip_count=$zip_count + zip_count=0 + fi + done + + # set result + if [ 1 = $zip_count ]; then + _find_filename=$(ls ${_search_dir}/$1*.zip) + _extract_mode=${_MODE_ZIP} + elif [ 1 = $tar_count ]; then + _find_filename=$(ls ${_search_dir}/$1*.tar.*) + _extract_mode=${_MODE_TAR} + elif [ 1 = $crypto_zip_count ]; then + _find_filename=$(ls ${_search_dir}/$1*.zip) + _extract_mode=${_MODE_CRYPTO_ZIP} + else + _find_filename="" + fi +} + +# $1: Mode +# $2: archive file name +func_cmn_extract_archive() +{ + case $1 in + $_MODE_ZIP) +# echo "Zip mode" + unzip -oq $2 + ;; + $_MODE_TAR) +# echo "Tar mode" + tar xf $2 + ;; + $_MODE_CRYPTO_ZIP) +# echo "Crypto Zip mode" + unzip -oq $2 + top_dir=$(basename $2) + top_dir=${top_dir%.*} + cd ${top_dir} + unzip -oq *.zip + if [ $? -gt 0 ]; then + func_error "ERROR: FAILED ZIP PASSWORD" + fi + cd ${TMPWORK} + ;; + *) + func_error "ERROR: func_cmn_extract_archive: mode error." + exit 1 + ;; + esac +} + +# $1: set target filename. +# $2: set MD5 expectation value. +func_cmn_md5_check() +{ + _md5_func_param_filename=$1 + _md5_func_param_expectation=$2 + if [ ! -e ${_md5_func_param_filename} ]; then + func_error "func_cmn_md5_check : ERROR ${_md5_func_param_filename} not found." + fi + + _calc_md5=$(md5sum ${_md5_func_param_filename} | cut -d " " -f1) + + if [ -n "${_no_md5check}" ] || [ -z ${_md5_func_param_expectation} ]; then + echo "Skip MD5 : `basename ${_md5_func_param_filename}`" + return + fi + + if [ -n "${_debug}" ]; then + echo "MD5 target file = ${_md5_func_param_filename}" + echo "calc_md5 = ${_calc_md5}" + echo "expect_value = ${_md5_func_param_expectation}" + fi + + if [ ${_calc_md5} = ${_md5_func_param_expectation} ]; then + echo "MD5 OK : `basename ${_md5_func_param_filename}`" + else + echo "calc_md5 = ${_calc_md5}" + echo "expect_value = ${_md5_func_param_expectation}" + func_error "MD5 ERROR : ${_md5_func_param_filename}" + fi +} + +##### Error function +# $1: error message +func_error() +{ + echo "$1" + # cleanup temp directory. + func_clean_tempdir + exit 1 +} + +##### cleanup temp directory +func_clean_tempdir() +{ + echo "cleanup temp directory" + rm -rf ${TMPWORK} +} + +##### Template function for Single package + +# $1: package name +# $2: search target filename +# $3: search directory (full path) +# return +# _find_filename : the found file (full path) +# _extract_top_dir_name +func_search_file_in_package() +{ + # search package file + func_cmn_find_file $1 $3 + if [ -n "${_debug}" ]; then + echo "" + echo "FileName = ${_find_filename}" + echo "Mode = ${_extract_mode}" + fi + + if [ -z "${_find_filename}" ]; then + return + fi + + # extract + func_cmn_extract_archive ${_extract_mode} "${_find_filename}" + + # Get directory name + # {PATH}/Package_Version.tar.gz or XXXX.zip --> Package_Version + top_dir=$(basename ${_find_filename}) + top_dir=${top_dir%.*} + + # search file + num=`find ${top_dir} -name $2 | wc -l` + if [ ${num} -eq 1 ]; then + _find_filename=`find ${top_dir} -name $2` + else + # same filename exists. + _find_filename=`find ${top_dir} -name $2 | grep Software` + fi + + # set mode + if [ `echo ${_find_filename} | grep '\.'zip` ]; then + _extract_mode=${_MODE_ZIP} + else + _extract_mode=${_MODE_TAR} + fi + + # set return value + _extract_top_dir_name=${top_dir} +} + +# $1: package name +# $2: copy filename (md5 target) +# $3: expect MD5 value +# $4: search directory (full path) +# return +# _find_file_name +# _extract_top_dir_name +func_search_and_md5check() +{ + # search package file + func_cmn_find_file $1 $4 + if [ -n "${_debug}" ]; then + echo "" + echo "FileName = ${_find_filename}" + echo "Mode = ${_extract_mode}" + fi + + if [ -z "${_find_filename}" ]; then + return + fi + + # extract + func_cmn_extract_archive ${_extract_mode} "${_find_filename}" + + # MD5 + # Get directory name + # {PATH}/Package_Version.tar.gz or XXXX.zip --> Package_Version + top_dir=$(basename ${_find_filename}) + top_dir=${top_dir%.*} + + # call func_cmn_md5_check + func_cmn_md5_check "${top_dir}/$1/Software/$2" "$3" + + # set return value + _extract_top_dir_name=${top_dir} +} + +##### Template function for Group package +# $1: group package name +# $2: single package name +# $3: copy filename (md5 target) +# $4: expect MD5 value +# $5: search directory (full path) +# return +# _find_file_name +# _extract_top_dir_name +# +# NOTE) This function support level1 packaging. "grp pkg in grp pkg" dose note support. +func_search_and_md5check_grp() +{ + # search group package @SRCDIR + func_cmn_find_file $1 $5 + if [ -n "${_debug}" ]; then + echo "search group package" + echo "FileName = ${_find_filename}" + echo "Mode = ${_extract_mode}" + echo "" + fi + + if [ -z "${_find_filename}" ]; then + return + fi + + # extract group package @TMPWORK + func_cmn_extract_archive ${_extract_mode} "${_find_filename}" + + cd ${_find_filename} + # check group pachage structure + # _/Package_Info.txt + top_dir=$(basename ${_find_filename}) + top_dir=${top_dir%.*} + + if [ ! -e ${top_dir}/Package_Info.txt ]; then + echo "grp package = $1" + echo "single package = $2" + func_error "ERROR: Package_Info.txt not found in Group package." + fi + + # search single package @TMPWORK/TOPDIR// + func_cmn_find_file $2 "${TMPWORK}/${top_dir}/$1" + if [ -n "${_debug}" ]; then + echo "search single package" + echo "FileName = ${_find_filename}" + echo "Mode = ${_extract_mode}" + echo "" + fi + + if [ -z "${_find_filename}" ]; then + return + fi + + # mv TMPWORK/. + mv ${_find_filename} ${TMPWORK}/. + + # delete group package + rm -rf ${TMPWORK}/${top_dir} + + # call search and md5check @TMPWORK + func_search_and_md5check $2 $3 $4 ${TMPWORK} +} + +##### File search and MD5check for Package list +# $1: package list +# $2: rigid flag (1: true, other: false) +# +# return +# 1: [Success] One or more files were found. +# 0: [Fail] File not found +# +# package list format +# list =",,, \ +# ,,, \ +# ,,," +# +# Note) Don't use space in xxx_name. +# Note) md5_variable_name is defined in md5list.txt. +# Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO +# It is omissible. The default is "_MD5_". +func_list_search_and_md5check () +{ + find_flag=0 + + for i in $1 + do + sw_name=`echo $i | cut -d "," -f 1` + pkg_name=`echo $i | cut -d "," -f 2` + copyfile_name=`echo $i | cut -d "," -f 3` + md5_val=`echo $i | cut -d "," -f 4` + + # is empty. Default MD5 name is "_MD5_" + if [ -z "${md5_val}" ]; then + md5_val=`eval echo '$_MD5_'${pkg_name}` + else + md5_val=`eval echo '$_MD5_'${md5_val}` + fi + + if [ -n "${_debug}" ]; then + echo "" + echo "sw_name = $sw_name" + echo "pkg_name = $pkg_name" + echo "copyfile_name = $copyfile_name" + echo "md5_val = $md5_val" + fi + + func_search_and_md5check "${pkg_name}" "${copyfile_name}" "${md5_val}" "${_src_full}" + if [ -z "${_find_filename}" ]; then + echo "${sw_name} not found!" + # rigid flag = TRUE. Not found = ERROR + if [ "X$2" = "X1" ]; then + return 0 + fi + else + find_flag=1 + fi + done + + return ${find_flag} +} + +##### File search and install (without MD5check) for Package list +# +# $1: package list +# $2: install directory +# +# return +# 1: [Success] One or more files were installed. +# 0: [Fail] File not found +# +# package list format +# list =",,, \ +# ,,, \ +# ,,," +# +# Note) Don't use space in xxx_name. +# Note) md5_variable_name is defined in md5list.txt. +# Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO +# It is omissible. The default is "_MD5_". +func_list_search_and_install_wo_md5check() +{ + find_flag=0 + + for i in $1 + do + sw_name=`echo $i | cut -d "," -f 1` + pkg_name=`echo $i | cut -d "," -f 2` + copyfile_name=`echo $i | cut -d "," -f 3` + md5_val=`echo $i | cut -d "," -f 4` + + # is empty. Default MD5 name is "_MD5_" + if [ -z "${md5_val}" ]; then + md5_val=`eval echo '$_MD5_'$pkg_name` + else + md5_val=`eval echo '$_MD5_'${md5_val}` + fi + + copyfile_name=$(basename ${copyfile_name}) + + if [ -n "${_debug}" ]; then + echo "" + echo "sw_name = $sw_name" + echo "pkg_name = $pkg_name" + echo "copyfile_name = $copyfile_name" + echo "md5_val = $md5_val" + fi + + # file search + func_search_file_in_package "${pkg_name}" "${copyfile_name}" "${_src_full}" + if [ -z "${_find_filename}" ]; then + echo "${sw_name} not found!" + else + find_flag=1 + + # install + install -d $2 + install -m 0644 ${_find_filename} $2 + echo "Installed $sw_name" + echo " : ${pkg_name}" + fi + done + + return ${find_flag} +} + +##### File search and install for Package list +# +# $1: package list +# $2: install directory +# +# return +# 1: [Success] One or more files were installed. +# 0: [Fail] File not found +# +# package list format +# list =",,, \ +# ,,, \ +# ,,," +# +# Note) Don't use space in xxx_name. +# Note) md5_variable_name is defined in md5list.txt. +# Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO +# It is omissible. The default is "_MD5_". +func_list_search_and_install() +{ + find_flag=0 + + for i in $1 + do + sw_name=`echo $i | cut -d "," -f 1` + pkg_name=`echo $i | cut -d "," -f 2` + copyfile_name=`echo $i | cut -d "," -f 3` + md5_val=`echo $i | cut -d "," -f 4` + + # is empty. Default MD5 name is "_MD5_" + if [ -z "${md5_val}" ]; then + md5_val=`eval echo '$_MD5_'$pkg_name` + else + md5_val=`eval echo '$_MD5_'${md5_val}` + fi + + if [ -n "${_debug}" ]; then + echo "" + echo "sw_name = $sw_name" + echo "pkg_name = $pkg_name" + echo "copyfile_name = $copyfile_name" + echo "md5_val = $md5_val" + fi + + # seach & MD5 check + func_search_and_md5check "${pkg_name}" "${copyfile_name}" "${md5_val}" "${_src_full}" + if [ -z "${_find_filename}" ]; then + echo "${sw_name} not found!" + else + find_flag=1 + + # Get directory name + # _find_filename = pkg file (full path). It is not copyfile. + top_dir=$(basename ${_find_filename}) + top_dir=${top_dir%.*} + + # install + install -d $2 + install -m 0644 ${top_dir}/${pkg_name}/Software/${copyfile_name} $2 + echo "Installed $sw_name" + echo " : ${pkg_name}" + fi + done + + return ${find_flag} +} + +##### Package function + +# For 3D graphics packages +func_gfx() +{ + echo "" + echo "Copying for Graphic Packages" + + copy_flag=0 + + for i in ${_gfx_list} + do + user_pkg_name=`echo $i | cut -d "," -f 1` + user_copyfile_name=`echo $i | cut -d "," -f 2` + user_md5_val=`eval echo '$_MD5_'${user_pkg_name}` + kern_pkg_name=`echo $i | cut -d "," -f 3` + kern_copyfile_name=`echo $i | cut -d "," -f 4` + kern_md5_val=`eval echo '$_MD5_'${kern_pkg_name}` + + if [ -n "${_debug}" ]; then + echo "" + echo "user_pkg_name = ${user_pkg_name}" + echo "user_copyfile_name= ${user_copyfile_name}" + echo "user_md5_val = ${user_md5_val}" + echo "kern_pkg_name = ${kern_pkg_name}" + echo "kern_copyfile_name= ${kern_copyfile_name}" + echo "kern_md5_val = ${kern_md5_val}" + fi + + # user module (file1) + func_search_and_md5check "${user_pkg_name}" "${user_copyfile_name}" "${user_md5_val}" "${_src_full}" + + if [ -z "${_find_filename}" ]; then + echo "${user_pkg_name} not found!" + continue + fi + + file1_top_dir=${_extract_top_dir_name} + echo "file1 top : ${file1_top_dir}" + + # kernel module (file2) + func_search_and_md5check "${kern_pkg_name}" "${kern_copyfile_name}" "${kern_md5_val}" "${_src_full}" + + # file1 exist, but file2 not exist + if [ -z "${_find_filename}" ]; then + func_error "ERROR: func_gfx: package file for Graphic is incomplete." + fi + + file2_top_dir=${_extract_top_dir_name} + echo "file2 top : ${file2_top_dir}" + + # Finally copy is performed + copy_flag=1 + install -d ${_GFX_UM_INST_DIR} + install -m 0644 ${file1_top_dir}/${user_pkg_name}/Software/${user_copyfile_name} ${_GFX_UM_INST_DIR}/${user_copyfile_name##INF_} + install -d ${_GFX_KM_INST_DIR} + install -m 0644 ${file2_top_dir}/${kern_pkg_name}/Software/${kern_copyfile_name} ${_GFX_KM_INST_DIR} + echo "Installed GFX package" + echo " : ${user_pkg_name}" + echo " : ${kern_pkg_name}" + echo "" + done + + if [ ${copy_flag} -eq 0 ]; then + return + fi + + echo "" + echo "Packages for GFX module were found and copied." + echo /=======================================================/ +} + +##### For Multi Media + +# For Audio library copy +# +# Global +# _audio_list: audio library list +# Return +# 0: Not found +# 1: Success +func_audio_lib() +{ + # MD5 check: OMX Media Component Audio Common Library for Linux + func_list_search_and_md5check "${_audio_common_list}" "1" + if [ $? -eq 0 ]; then + echo "Audio Common Library not found!" + echo "" + return 0 + fi + + # MD5 check: audio library. + func_list_search_and_md5check "${_audio_list}" + if [ $? -eq 0 ]; then + # library not found. + echo "" + echo "Audio library not found." + return 0 + fi + + # Add audio common library to list + _audio_list="${_audio_common_list} ${_audio_list}" + + # Install omx common lib (if not installed) + func_install_omx_common + + # Install Audio library packages + func_list_search_and_install_wo_md5check "${_audio_list}" "${_OMX_UM_INST_DIR}" + _audio_common_install=1 + + return 1 +} + +# For Audio library +func_audio() +{ + echo "" + echo "Copying for Audio Common Packages" + + _audio_common_install=0 + + # Audio requires OMX common library + if [ ${_omx_common_install} -eq 0 ]; then + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_omx_common_list}" "1" + if [ $? -eq 0 ]; then + echo "OMX Common Library not found!" + echo "" + return + fi + else + echo "OMX Common Library already installed" + fi + + # Audio Library + func_audio_lib + if [ $? -eq 0 ]; then + echo "" + echo "Skip Audio Packages" + echo "" + return + fi + + echo "" + echo "Packages for Audio module were found and copied." + echo /=======================================================/ +} + +# For Audio M/W +# Global +# _audio_mw_list: audio M/W library list +# Return +# 0: Not found +# 1: Success +func_audio_mw() +{ + echo "" + echo "Copying for Audio M/W Packages" + + # MD5 check + func_list_search_and_md5check "${_audio_mw_list}" + if [ $? -eq 0 ]; then + # library not found. + echo "" + echo "Packages for Audio M/W module were not found." + return 0 + fi + + # Install Audio M/W library packages + func_list_search_and_install_wo_md5check "${_audio_mw_list}" "${_OMX_UM_INST_DIR}" + + echo "" + echo "Packages for Audio M/W module were found and copied." + echo /=======================================================/ + + return 1 +} + +# install OMX common library +func_install_omx_common() +{ + if [ ${_omx_common_install} -eq 0 ]; then + echo "" + echo "Install for OMX Common Packages" + func_list_search_and_install_wo_md5check "${_omx_common_list}" "${_OMX_UM_INST_DIR}" + _omx_common_install=1 + fi +} + +# install uvcs driver +func_install_uvcs() +{ + if [ ${_uvcs_install} -eq 0 ]; then + echo "" + echo "Installed UVCS driver" + func_list_search_and_install_wo_md5check "${_uvcs_list}" "${_UVCS_INST_DIR}" + _uvcs_install=1 + fi +} + +# search & MD5 check for OMX Video Decoder library +# Global +# _video_dec_list: video decoder list +# Return +# 0: Not found +# 1: Success +func_video_decoder_lib() +{ + echo "" + echo "Copying for Video Decoder Library Packages" + + # MD5 check: Decoder Common Library (rigid flag=TRUE) + func_list_search_and_md5check "${_video_dec_common_list}" "1" + if [ $? -eq 0 ]; then + echo "OMX Video Decoder Common Library not found!" + return 0 + fi + + # MD5 check: Video Decoder Library + func_list_search_and_md5check "${_video_dec_list}" + if [ $? -eq 0 ]; then + # library not found. + return 0 + fi + + # install OMX common lib (if not installed) + func_install_omx_common + + # install UVCS driver (if not installed) + func_install_uvcs + + # Add video decoder common lib to list + _video_dec_list="${_video_dec_common_list} ${_video_dec_list}" + + # install searched library + func_list_search_and_install_wo_md5check "${_video_dec_list}" "${_OMX_UM_INST_DIR}" + _video_decoder_common_install=1 + + return 1 +} + +# search & MD5 check for OMX Video Encoder library +# Global +# _video_enc_list: video encoder list +# Return +# 0: Not found +# 1: Success +func_video_encoder_lib() +{ + echo "" + echo "Copying for Video Encoder Library Packages" + + + # MD5 check Encoder Common Library (rigid flag=TRUE) + func_list_search_and_md5check "${_video_enc_common_list}" "1" + if [ $? -eq 0 ]; then + echo "OMX Video Encoder Common Library not found!" + return 0 + fi + _video_encoder_common_install=0 + + # Video Encoder Library + # MD5 check + func_list_search_and_md5check "${_video_enc_list}" + if [ $? -eq 0 ]; then + # library not found. + return 0 + fi + + # install common lib (if not installed) + func_install_omx_common + + # install UVCS driver (if not installed) + func_install_uvcs + + # Add Video encoder common library to list + _video_enc_list="${_video_enc_common_list} ${_video_enc_list}" + + # install searched library + func_list_search_and_install_wo_md5check "${_video_enc_list}" "${_OMX_UM_INST_DIR}" + _video_encoder_common_install=1 + + return 1 +} + +# For Video decoder +# Global +# _video_dec_list: video decoder list +# Return +# 0: Not found +# 1: Success +func_video_decoder() +{ + echo "" + echo "Copying for Video Decoder Packages" + + # OMX Common library + if [ ${_omx_common_install} -eq 0 ]; then + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_omx_common_list}" "1" + if [ $? -eq 0 ]; then + echo "OMX Common Library not found!" + echo "" + return + fi + else + echo "OMX Common Library already installed" + fi + + # UVCS driver + if [ ${_uvcs_install} -eq 0 ]; then + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_uvcs_list}" "1" + if [ $? -eq 0 ]; then + echo "UVCS driver not found!" + echo "" + return + fi + else + echo "UVCS driver already installed" + fi + + # OMX Decoder + # Decoder common Lib + func_video_decoder_lib + if [ $? -eq 0 ]; then + echo "" + echo "Skip Video Decoder Packages" + echo "" + return + fi + + echo "" + echo "Packages for video decoder module were found and copied." + echo /=======================================================/ +} + +# For Video encoder +func_video_encoder() +{ + echo "" + echo "Copying for Video Encoder Packages" + + # OMX Common library + if [ ${_omx_common_install} -eq 0 ]; then + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_omx_common_list}" "1" + if [ $? -eq 0 ]; then + echo "OMX Common Library not found!" + echo "" + return + fi + else + echo "OMX Common Library already installed" + fi + + # UVCS driver + if [ ${_uvcs_install} -eq 0 ]; then + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_uvcs_list}" "1" + if [ $? -eq 0 ]; then + echo "UVCS driver not found!" + echo "" + return + fi + else + echo "UVCS driver already installed" + fi + + # OMX Encoder + # Encoder common Lib + func_video_encoder_lib + if [ $? -eq 0 ]; then + echo "" + echo "Skip Video Encoder Packages" + echo "" + return + fi + + echo "" + echo "Packages for video encoder module were found and copied." + echo /=======================================================/ +} + +# For DTV kernel module +func_dtv_kern() +{ + echo "" + echo "Copying for DTV kernel module" + + _dtv_kern_install=0 + + func_list_search_and_md5check "${_dtv_km_list}" + if [ $? -eq 0 ]; then + # library not found. + echo "" + echo "DTV kernel library not found!" + return + fi + + pkg_name=`echo ${_dtv_km_list} | cut -d "," -f 2` + copyfile_name=`echo ${_dtv_km_list} | cut -d "," -f 3` + + # extract --> archive --> copied + echo "Installed DTV kernel modules" + func_search_file_in_package "${pkg_name}" "${copyfile_name}" "${_src_full}" + func_cmn_extract_archive "${_extract_mode}" "${_find_filename}" + + dtv_driver_list="ssp_drv scu_src_drv tsif_drv tddmac_drv" + for i in ${dtv_driver_list} + do + tar cfz $i.tar.gz $i + install -d ${_DTV_KM_INST_DIR} + install -m 644 $i.tar.gz ${_DTV_KM_INST_DIR} + echo " : $i.tar.gz" + done + + _dtv_kern_install=1 + + echo "" + echo "DTV kernel module were found and copied." + echo /=======================================================/ +} + +# For DTV lib +func_dtv_lib() +{ + echo "" + echo "Copying for DTV Library Packages" + + # DTV kernel modules + if [ ${_dtv_kern_install} -eq 0 ]; then + echo "DTV kernel module not found!" + echo "Skip DTV Package" + echo "" + return + fi + + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_dtv_um_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "" + echo "DTV library not found" + return + fi + + # install + func_list_search_and_install_wo_md5check "${_dtv_um_list}" "${_DTV_UM_INST_DIR}" + + echo "" + echo "DTV Package were found and copied." + echo /=======================================================/ +} + +# For DVD lib +func_dvd_lib() +{ + echo "" + echo "Copying for DVD Library Packages" + + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_dvd_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "" + echo "DVD library not found" + return + fi + + # install searched library + func_list_search_and_install_wo_md5check "${_dvd_list}" "${_DVD_UM_INST_DIR}" + + echo "" + echo "DVD Package were found and copied." + echo /=======================================================/ +} + +# For DTV/DVD main routine +func_dtv_dvd() +{ + echo "" + echo "Copying for DTV/DVD Packages" + + # DTV/DVD requires OMX Video Decoder + if [ ${_video_decoder_common_install} -eq 0 ]; then + echo "Video Decoder Library not found!" + echo "Skip DTV/DVD Package" + echo "" + return + fi + + # DTV requires Audio Decoder + if [ ${_audio_common_install} -eq 0 ]; then + echo "Audio Common Library not found!" + echo "Skip DTV Package" + echo "" + else + # DTV package + func_dtv_kern + func_dtv_lib + fi + + # DVD package + func_dvd_lib +} + +# For CMS main routine +func_cms() +{ + echo "" + echo "Copying for CMS Packages" + + copy_flag=0 + + # MD5 check + func_list_search_and_md5check "${_cms_list}" + if [ $? -eq 0 ]; then + # library not found. + echo "Skip CMS package" + echo "" + return + fi + + # Install library + func_list_search_and_install_wo_md5check "${_cms_list}" "${_CMS_UM_INST_DIR}" + + echo "" + echo "Packages for CMS were found and copied." + echo /=======================================================/ +} + +# For ADSP main routine +func_adsp() +{ + echo "" + echo "Copying for ADSP Packages" + + # MD5 check (rigid flag = TRUE) + # In ADSP, all files are necesarry + func_list_search_and_md5check "${_adsp_km_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "Skip ADSP Package" + echo "" + return + fi + + func_list_search_and_md5check "${_adsp_um_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "Skip ADSP Package" + echo "" + return + fi + + # Install kernel module + func_list_search_and_install_wo_md5check "${_adsp_km_list}" "${_ADSP_KM_INST_DIR}" + + # Install user module + func_list_search_and_install_wo_md5check "${_adsp_um_list}" "${_ADSP_UM_INST_DIR}" + + echo "" + echo "Packages for ADSP were found and copied." + echo /=======================================================/ +} + +# For ICCOM main routine +func_iccom() +{ + echo "" + echo "Copying for ICCOM Packages" + + # MD5 check (rigid flag = TRUE) + # In ICCOM, all files are necesarry + func_list_search_and_md5check "${_iccom_km_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "Skip ICCOM Package" + echo "" + return + fi + + func_list_search_and_md5check "${_iccom_um_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "Skip ICCOM Package" + echo "" + return + fi + + # Install kernel module + func_list_search_and_install_wo_md5check "${_iccom_km_list}" "${_ICCOM_KM_INST_DIR}" + + # Install user module + func_list_search_and_install_wo_md5check "${_iccom_um_list}" "${_ICCOM_UM_INST_DIR}" + + echo "" + echo "Packages for ICCOM were found and copied." + echo /=======================================================/ +} + +################################ +# Copy Script Main routine +################################ +echo "Copyscript for R-Car Gen3" +echo +#### 1) Checking current directory +if [ ! -d meta-rcar-gen3 ]; then + echo "ERROR: Please extract meta-renesas and cd to it, before execute $0" + exit 1 +fi + +#### 2) Checking Arguments +if [ "X$1" = "X" ]; then + usage + exit 1 +fi + +while [ $# -gt 0 ] ; do + case "$1" in + -f|--force) + _no_md5check=1 + ;; + -d|--debug) + _debug=1 + ;; + *) + _src_dirname=$(basename $1) + _src_path=$(cd $(dirname $1) && pwd) + _src_full=${_src_path}/${_src_dirname} + ;; + esac + shift +done + +# source directory check +if [ ! -d ${_src_path}/${_src_dirname} ]; then + echo "${_src_path}/${_src_dirname} not found." + usage + exit 1 +fi + +if [ -n "${_debug}" ]; then + echo "src = ${_src_dirname}" + echo "src_path = ${_src_path}" + echo "src_full = ${_src_full}" + echo "no_md5check = ${_no_md5check}" + echo "" +fi + +##### 3) create temp directory +TMPWORK=${PWD}/CP_SCRIPT_TEMP +if [ -d ${TMPWORK} ]; then + echo "ERROR: Work directory already exist." + exit 1 +fi +install -d -m 700 ${TMPWORK} +cd ${TMPWORK} + +##### 4) copy +# initialize flag +_omx_common_install=0 +_uvcs_install=0 +_audio_common_install=0 +_video_decoder_common_install=0 +_video_encoder_common_install=0 +_dtv_kern_install=0 + +func_gfx +func_audio +func_audio_mw +func_video_decoder +func_video_encoder +func_dtv_dvd +func_cms +func_adsp +func_iccom + +##### 5) cleanup temp directory +func_clean_tempdir + +##### End +echo "Complete copying !" diff --git a/meta-rcar-gen3/docs/sample/copyscript/md5list.txt b/meta-rcar-gen3/docs/sample/copyscript/md5list.txt new file mode 100644 index 0000000..09908e4 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/copyscript/md5list.txt @@ -0,0 +1,54 @@ +# GFX +_MD5_RTM0RC7795GLTG0001SL40C="" +_MD5_RCH3G001L4001ZDO="" +_MD5_RTM0RC7796GLTG0001SL40C="" +_MD5_RCM3G001L4001ZDO="" +_MD5_INFRTM0RC7795GLTG0001SL40C="" +_MD5_INFRTM0RC7796GLTG0001SL40C="" +# OMX AUDIO +_MD5_RTM0AC0000ADAACMZ1SL40C="bd667e3092445ea03a1f058d55357161" +_MD5_RTM0AC0000XAAACD30SL40C="0d6e0b1542ac0d410af52ee9b587c4c4" +_MD5_RTM0AC0000XACMND30SL40C="d6e7aa558ec54d14aa240b85fccedb57" +_MD5_RTM0AC0000ADAAPMZ1SL40C="0b9db0589b0af721fa5c7a7056a2d451" +_MD5_RTM0AC0000ADMP3MZ1SL40C="053243f43212e33e36926ffaf2ddc0a4" +_MD5_RTM0AC0000ADWMAMZ1SL40C="8353f20235a6db52f16ba64c18e58d0f" +_MD5_RTM0AC0000XAAAPD30SL40C="21301077ada5092c19e9c946a0266877" +_MD5_RTM0AC0000XAMP3D30SL40C="a1880b189f4d7055a9fed70cdb9f1a5c" +_MD5_RTM0AC0000XAWMAD30SL40C="dff1c890612240b9ed2fcb021a37a6e7" +_MD5_RTM0AC0000AEAACMZ1SL40C="652d8f15c327646f9760de9f9a5f1dc2" +_MD5_RTM0AC0000XAAACE30SL40C="fb5489c649f825caea9ec6cf8edbad57" +_MD5_RTM0AC0000XAALAD30SL40C="30fa3e66807c3f5b7d09a6e5eec60c01" +_MD5_RTM0AC0000XAFLAD30SL40C="161bbf4cd51006fcc184d593ed53047f" +_MD5_RTM0AC0000XADD5D30SL40C="d712ce9d896db9204f62cbd65de5a7ab" +_MD5_RTM0AC0000ADDD5MZ1SL40C="" +# OMX VIDEO +_MD5_RTM0AC0000XV263D30SL40C="a4fbfc8091940004f324261d607b02eb" +_MD5_RTM0AC0000XV264D30SL40C="7b8efc458a432e6154d11835470adf82" +_MD5_RTM0AC0000XCMCTL30SL40C="ef10f4390774101cc42973dd34b10ace" +_MD5_RCG3VUDRL4001ZDO="50b7fa17e27059f93378745e21e8c087" +_MD5_RTM0AC0000XVCMND30SL40C="709f278ae7aeea1a1ce7d4b5d9832b21" +_MD5_RTM0AC0000XV265D30SL40C="145c841dae7a02cd2e4a3a4696c641f1" +_MD5_RTM0AC0000XVM2VD30SL40C="73f45b86a6ead4fe66c2f52494449491" +_MD5_RTM0AC0000XVM4VD30SL40C="0d19e9b474a6e7062663d3d892b87039" +_MD5_RTM0AC0000XVVC1D30SL40C="c37767c5beac63cc1a1607f3506a9520" +_MD5_RTM0AC0000XVCMNE30SL40C="1b6f699c432d10f4eaed56f4666f1f8a" +_MD5_RTM0AC0000XV264E30SL40C="e2e283c378e333bb6d5ad8205f143caf" +_MD5_RTM0AC0000XVDVXD30SL40C="7f459cc9ce9f95413101afbf7bcd80d3" +_MD5_RTM0AC0000XVRLVD30SL40C="db023a5aa5733307516fd13c3b705268" +# DTV/DVD +_MD5_RCG3T001L4001ZDO="" +_MD5_RTM0RC0000TE020000SL40C1="" +_MD5_RTM0RC0000TE020000SL40C2="" +_MD5_RTM0RC0000XDVDC301SL40C="" +# CMS +_MD5_RTM0AC0000JRCMBCV0SL40C="a0cbfaa60ff57ce214da102363f77bf2" +_MD5_RTM0AC0000JRCMBLC0SL40C="e472cc72ef07fc8b6fdeffa7e7f11650" +_MD5_RTM0AC0000JRCMDGV0SL40C="154634b2517211a00f9f1d28344edf64" +# ADSP +_MD5_RCG3AHFWN0101ZDP="d1acca667c26f3285619ca737bf0625c" +_MD5_RCG3AHIFL4001ZDP="7fc31a6c6ce97a8104cd298d8a177ba6" +_MD5_RCG3AHPDL4001ZDO="6feb62ac5839bfdb7c85f99b3e1bf50e" +# ICCOM +_MD5_RCG3ZLIDL4001ZNO1="ca3528b8928f44337717ae4c5674a344" +_MD5_RCG3ZLIDL4001ZNO2="410daab0f338e4311a6e4422f770d3ee" +_MD5_RCG3ZLILL4001ZNO="e01be9227b87dffd2c23d1067d5fa1b6" diff --git a/meta-rcar-gen3/docs/sample/patch/patch-for-linaro-gcc/0001-rcar-gen3-add-readme-for-building-with-Linaro-Gcc.patch b/meta-rcar-gen3/docs/sample/patch/patch-for-linaro-gcc/0001-rcar-gen3-add-readme-for-building-with-Linaro-Gcc.patch new file mode 100644 index 0000000..c00327f --- /dev/null +++ b/meta-rcar-gen3/docs/sample/patch/patch-for-linaro-gcc/0001-rcar-gen3-add-readme-for-building-with-Linaro-Gcc.patch @@ -0,0 +1,151 @@ +From 019d1f04b83db8cd4d5a9381d5ef0c90e946cd05 Mon Sep 17 00:00:00 2001 +From: Phong Man Tran +Date: Mon, 6 Jul 2015 14:48:50 +0700 +Subject: [PATCH] rcar-gen3: add readme for building with Linaro Gcc + +This patch add the dependent layer information, build instructions +for using Linaro Gcc. + +Updated on Dec, 2016: +- Add H3ULCB +- Change supported branch from jethro to krogoth +- Change Maintainer information. + +Signed-off-by: Phong Man Tran +Signed-off-by: Thao Nguyen +--- + meta-rcar-gen3/README.linaro | 122 +++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 122 insertions(+) + create mode 100644 meta-rcar-gen3/README.linaro + +diff --git a/meta-rcar-gen3/README.linaro b/meta-rcar-gen3/README.linaro +new file mode 100644 +index 0000000..6542d43 +--- /dev/null ++++ b/meta-rcar-gen3/README.linaro +@@ -0,0 +1,122 @@ ++meta-rcar-gen3 ++============== ++ ++This layer provides that evaluation board is mounted ARM SoCs of Renesas ++Electronics, called the R-Car Generation 3. Currently, this supports ++board and the SoCs of the following: ++ - Board: Salvator-X / SoC: R8A7795 (R-Car H3), R8A7796 (R-Car M3) ++ - Board: R-Car Starter Kit premier(H3ULCB) / SoC: R8A7795 ++ ++Patches ++======= ++ ++Please submit any patches for this layer to: takamitsu.honda.pv@renesas.com ++Please see the MAINTAINERS file for more details. ++ ++Dependencies ++============ ++ ++This layer depends on: ++ ++ URI: git://git.yoctoproject.org/poky ++ layers: meta, meta-yocto, meta-yocto-bsp ++ branch: krogoth ++ ++ URI: git://git.yoctoproject.org/meta-renesas ++ layers: meta-rcar-gen3 ++ branch: krogoth ++ ++ URI: https://git.linaro.org/openembedded/meta-linaro.git ++ layers: meta-linaro-toolchain ++ branch: krogoth ++ ++ URI: git://git.openembedded.org/meta-openembedded ++ layers: meta-oe ++ branch: krogoth ++ ++Build Instructions ++================== ++ ++The following instructions require a Poky installation (or equivalent). ++ ++Initialize a build using the 'oe-init-build-env' script in Poky. e.g.: ++ ++ $ source poky/oe-init-build-env ++ ++After that, initialized configure bblayers.conf by adding meta-rcar-gen3 layer. e.g.: ++ ++ BBLAYERS ?= " \ ++ /poky/meta \ ++ /poky/meta-yocto \ ++ /poky/meta-yocto-bsp \ ++ /meta-renesas/meta-rcar-gen3 \ ++ /meta-linaro/meta-linaro-toolchain \ ++ /meta-openembedded/meta-oe \ ++ " ++ ++To build a specific target BSP, configure the associated machine in local.conf: ++ ++ MACHINE ??= "" ++ ++Select the SOC ++ ++ For H3: r8a7795 ++ SOC_FAMILY = "r8a7795" ++ ++ For M3: r8a7796 ++ SOC_FAMILY = "r8a7796" ++ ++Must change the package class to ipk files in local.conf: ++ ++ PACKAGE_CLASSES ?= "package_ipk" ++ ++Must Change the Gcc version in local.conf. ++ ++ GCCVERSION="linaro-5.2" ++ ++Configure for systemd init in local.conf: ++ ++ DISTRO_FEATURES_append = " systemd" ++ VIRTUAL-RUNTIME_init_manager = "systemd" ++ ++Build the target file system image using bitbake: ++ ++ $ bitbake core-image-minimal ++ ++After completing the images for the target machine will be available in the output ++directory 'tmp/deploy/images/'. ++ ++Images generated: ++ * Image (generic Linux Kernel binary image file) ++ * Image-.dtb (DTB for target machine) ++ * core-image-minimal-.tar.bz2 (rootfs tar+bzip2) ++ * core-image-minimal-.ext4 (rootfs ext4 format) ++ * core-image-minimal-.cpio.gz (rootfs cpio+gz format) ++ ++Build Instructions for SDK ++========================== ++This may be changed in the near feature. These instructions are tentative. ++ ++Should define the staticdev in SDK image feature for installing the static libs ++to SDK in local.conf. ++ ++ SDKIMAGE_FEATURES_append = " staticdev-pkgs" ++ ++Use bitbake -c populate_sdk for generating the toolchain SDK: ++For 64-bit target SDK (aarch64): ++ ++ $ bitbake core-image-minimal -c populate_sdk ++ ++The SDK can be found in the output directory 'tmp/deploy/sdk' ++ * poky-glibc-x86_64-core-image-minimal-aarch64-toolchain-x.x.sh ++ ++Usage of toolchain SDK: ++Install the SDK to the default: /opt/poky/x.x ++(x.x is YP version, i.e. 2.1.) ++For 64-bit target SDK: ++ ++ $ sh poky-glibc-x86_64-core-image-minimal-aarch64-toolchain-x.x.sh ++ ++For 64-bit application use environment script in /opt/poky/x.x ++ ++ $ source /opt/poky/x.x/environment-setup-aarch64-poky-linux +-- +1.9.1 + diff --git a/meta-rcar-gen3/include/adsp-control.inc b/meta-rcar-gen3/include/adsp-control.inc new file mode 100644 index 0000000..44a8d14 --- /dev/null +++ b/meta-rcar-gen3/include/adsp-control.inc @@ -0,0 +1,2 @@ +# USE_ADSP for Audio DSP +USE_ADSP = "${@bb.utils.contains('DISTRO_FEATURES', 'adsp', '1', '0', d)}" diff --git a/meta-rcar-gen3/include/avb-control.inc b/meta-rcar-gen3/include/avb-control.inc new file mode 100644 index 0000000..6ed7f53 --- /dev/null +++ b/meta-rcar-gen3/include/avb-control.inc @@ -0,0 +1,2 @@ +# USE_AVB for AVB Software Package for Linux +USE_AVB = "${@'1' if 'avb' in '${DISTRO_FEATURES}' else '0'}" diff --git a/meta-rcar-gen3/include/cms-control.inc b/meta-rcar-gen3/include/cms-control.inc new file mode 100644 index 0000000..2ebfa51 --- /dev/null +++ b/meta-rcar-gen3/include/cms-control.inc @@ -0,0 +1,18 @@ +# USE_CMSBCM for Basic Color Management Middleware for Linux +USE_CMSBCM = "${@bb.utils.contains('DISTRO_FEATURES', 'cmsbcm', '1', '0', d)}" + +# USE_CMSBLC for Backlight Control Middleware for Linux +USE_CMSBLC = "${@bb.utils.contains('DISTRO_FEATURES', 'cmsblc', '1', '0', d)}" + +# USE_CMSDGC for Dynamic Gamma Correction Middleware for Linux +USE_CMSDGC = "${@bb.utils.contains('DISTRO_FEATURES', 'cmsdgc', '1', '0', d)}" + +# CMS Flag list +LIST_CMS_FLAG = " \ + ${USE_CMSBCM} \ + ${USE_CMSBLC} \ + ${USE_CMSDGC} \ +" + +# USE_CMS for Color Management Middleware +USE_CMS = "${@'1' if '1' in '${LIST_CMS_FLAG}' else '0'}" diff --git a/meta-rcar-gen3/include/dtv-dvd-control.inc b/meta-rcar-gen3/include/dtv-dvd-control.inc new file mode 100644 index 0000000..9029dfd --- /dev/null +++ b/meta-rcar-gen3/include/dtv-dvd-control.inc @@ -0,0 +1,5 @@ +# USE_DTV for ISDB-T DTV Software Package +USE_DTV = "${@'1' if 'dtv' in '${DISTRO_FEATURES}' else '0'}" + +# USE_DVD for DVD Core-Middleware for Linux +USE_DVD = "${@'1' if 'dvd' in '${DISTRO_FEATURES}' else '0'}" diff --git a/meta-rcar-gen3/include/gles-control.inc b/meta-rcar-gen3/include/gles-control.inc new file mode 100644 index 0000000..65ca5e2 --- /dev/null +++ b/meta-rcar-gen3/include/gles-control.inc @@ -0,0 +1,3 @@ +USE_GLES = "${@'1' if 'gsx' in '${MACHINE_FEATURES}' else '0'}" +USE_GLES_WAYLAND = \ + "${@'1' if '${USE_GLES}' == '1' and 'wayland' in '${DISTRO_FEATURES}' else '0'}" diff --git a/meta-rcar-gen3/include/iccom-control.inc b/meta-rcar-gen3/include/iccom-control.inc new file mode 100644 index 0000000..bb8bd2c --- /dev/null +++ b/meta-rcar-gen3/include/iccom-control.inc @@ -0,0 +1,2 @@ +# USE_ICCOM for Linux ICCOM driver, Linux ICCOM library +USE_ICCOM = "${@'1' if 'iccom' in '${DISTRO_FEATURES}' else '0'}" diff --git a/meta-rcar-gen3/include/multimedia-control.inc b/meta-rcar-gen3/include/multimedia-control.inc new file mode 100644 index 0000000..beeabc1 --- /dev/null +++ b/meta-rcar-gen3/include/multimedia-control.inc @@ -0,0 +1,9 @@ +# USE_MULTIMEDIA for Renesas Multimedia package +USE_MULTIMEDIA = "${@'1' if 'multimedia' in '${MACHINE_FEATURES}' else '0'}" +USE_MULTIMEDIA_TP = "${@'1' if 'mm-test' in '${DISTRO_FEATURES}' else '0'}" + +# For wayland +USE_WAYLAND = "${@'1' if 'wayland' in '${DISTRO_FEATURES}' else '0'}" + +# USE_V4L2_RENDERER for weston v4l2-renderer +USE_V4L2_RENDERER = "${@'1' if 'v4l2-renderer' in '${DISTRO_FEATURES}' else '0'}" diff --git a/meta-rcar-gen3/include/omx-control.inc b/meta-rcar-gen3/include/omx-control.inc new file mode 100644 index 0000000..6c630f8 --- /dev/null +++ b/meta-rcar-gen3/include/omx-control.inc @@ -0,0 +1,129 @@ +## Additional configuration in OMX module, include +# USE_H263D_OMX for OMX Media Component H263 OMX Library +USE_H263D_OMX = "${@'1' if 'h263dec_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_H264D_OMX for OMX Media Component H264 OMX Library +USE_H264D_OMX = "${@'1' if 'h264dec_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_H264E_OMX for OMX Media Component H264 Encoder Library +USE_H264E_OMX = "${@'1' if 'h264enc_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_H265D_OMX for OMX Media Component H265 OMX Library +USE_H265D_OMX = "${@'1' if 'h265dec_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_MPEG2_OMX for OMX Media Component MPEG2 OMX Library +USE_MPEG2D_OMX = "${@'1' if 'mpeg2dec_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_MPEG4D_OMX for OMX Media Component MPEG4 Decoder Library +USE_MPEG4D_OMX = "${@'1' if 'mpeg4dec_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_VC1D_OMX for OMX Media Component VC-1 Decoder Library +USE_VC1D_OMX = "${@'1' if 'vc1dec_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_DIVXD_OMX for OMX Media Component DivX Decoder Library +USE_DIVXD_OMX = "${@'1' if 'divxdec_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_RVD_OMX for OMX Media Component RealVideo Decoder Library +USE_RVD_OMX = "${@'1' if 'rvdec_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_AACLCD_OMX for OMX Media Component AACLC OMX Library +USE_AACLCD_OMX = "${@'1' if 'aaclcdec_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_AACPV2D_OMX for OMX Media Component aacPlus V2 OMX Library +USE_AACPV2D_OMX = "${@'1' if 'aacpv2dec_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_MP3D_OMX for OMX Media Component MP3 OMX Library +USE_MP3D_OMX = "${@'1' if 'mp3dec_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_WMAD_OMX for OMX Media Component WMA OMX Library +USE_WMAD_OMX = "${@'1' if 'wmadec_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_ALACD_OMX for OMX Media Component ALAC decoder Library +USE_ALACD_OMX = "${@'1' if 'alacdec_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_FLACD_OMX for OMX Media Component FLAC decoder Library +USE_FLACD_OMX = "${@'1' if 'flacdec_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_DDD_OMX for OMX Media Component Dolby(R) Digital decoder Library +USE_DDD_OMX = "${@'1' if 'dddec_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_AACLCE_OMX for OMX Media Component AAC-LC encoder Library +USE_AACLCE_OMX = "${@'1' if 'aaclcenc_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_AACLC_MDW for AACLC MDW Library +USE_AACLC_MDW = "${@'1' if 'aaclcdec_mdw' in '${DISTRO_FEATURES}' else '0'}" + +# USE_AACPV2_MDW for aacPlus V2 MDW Library +USE_AACPV2_MDW = "${@'1' if 'aacpv2dec_mdw' in '${DISTRO_FEATURES}' else '0'}" + +# USE_MP3_MDW for MP3 MDW Library +USE_MP3_MDW = "${@'1' if 'mp3dec_mdw' in '${DISTRO_FEATURES}' else '0'}" + +# USE_WMA_MDW for WMA MDW Library +USE_WMA_MDW = "${@'1' if 'wmadec_mdw' in '${DISTRO_FEATURES}' else '0'}" + +# USE_DD_MDW for Dolby(R) Digital MDW Library +USE_DD_MDW = "${@'1' if 'dddec_mdw' in '${DISTRO_FEATURES}' else '0'}" + +# USE_AACLCE_OMX for AAC-LC encoder middleware Library +USE_AACLCE_MDW = "${@'1' if 'aaclcenc_mdw' in '${DISTRO_FEATURES}' else '0'}" + +# OMX Video Decoder Flag list +LIST_OMX_VIDEO_DEC_FLAG = " \ + ${USE_H263D_OMX} \ + ${USE_H264D_OMX} \ + ${USE_H265D_OMX} \ + ${USE_MPEG2D_OMX} \ + ${USE_MPEG4D_OMX} \ + ${USE_VC1D_OMX} \ + ${USE_DIVXD_OMX} \ + ${USE_RVD_OMX} \ +" + +# OMX Video Encoder Flag list +LIST_OMX_VIDEO_ENC_FLAG = " \ + ${USE_H264E_OMX} \ +" + +# OMX Audio Flag list (except MDW) +LIST_OMX_AUDIO_FLAG = " \ + ${USE_AACLCD_OMX} \ + ${USE_AACPV2D_OMX} \ + ${USE_MP3D_OMX} \ + ${USE_WMAD_OMX} \ + ${USE_AACLCE_OMX} \ + ${USE_ALACD_OMX} \ + ${USE_FLACD_OMX} \ + ${USE_DDD_OMX} \ +" + +# Audio M/W Flag list +LIST_AUDIO_MDW_FLAG = " \ + ${USE_AACLC_MDW} \ + ${USE_AACPV2_MDW} \ + ${USE_MP3_MDW} \ + ${USE_WMA_MDW} \ + ${USE_DD_MDW} \ + ${USE_AACLCE_MDW} \ +" + +# USE_OMX_VIDEO_DEC for Video Decoder Common Libs +USE_VIDEO_DEC = "${@'1' if '1' in '${LIST_OMX_VIDEO_DEC_FLAG}' else '0'}" + +# USE_OMX_VIDEO_DEC for Video Encoder Common Libs +USE_VIDEO_ENC = "${@'1' if '1' in '${LIST_OMX_VIDEO_ENC_FLAG}' else '0'}" + +# USE_VIDEO_OMX for Enable/Disable OMX Video +USE_VIDEO_OMX = "${@'1' if '1' in '${USE_VIDEO_DEC} ${USE_VIDEO_ENC}' else '0'}" + +# USE_AUDIO_OMX for Audio Common Libs +USE_AUDIO_OMX = "${@'1' if '1' in '${LIST_OMX_AUDIO_FLAG}' else '0'}" + +# USE_OMX_COMMON for OMX Common Libs +USE_OMX_COMMON = "${@'1' if '1' in '${USE_VIDEO_OMX} ${USE_AUDIO_OMX}' else '0'}" + +# USE_OMX_USER_MODULE for OMX User Module +# Note) List of USE_OMX_COMMON = {USE_VIDEO_OMX} + {USE_AUDIO_OMX} +USE_OMX_USER_MODULE = "${@'1' if '1' in '${USE_OMX_COMMON} ${LIST_AUDIO_MDW_FLAG}' else '0'}" + +USE_OMX_EVA_PKG = "${@'1' if 'use_eva_pkg' in '${DISTRO_FEATURES}' else '0'}" diff --git a/meta-rcar-gen3/include/rcar-gen3-modules-common.inc b/meta-rcar-gen3/include/rcar-gen3-modules-common.inc new file mode 100644 index 0000000..7eb7a3c --- /dev/null +++ b/meta-rcar-gen3/include/rcar-gen3-modules-common.inc @@ -0,0 +1,8 @@ +export BUILDDIR = "${STAGING_INCDIR}/.." +export INCSHARED = "${STAGING_INCDIR}" +export LIBSHARED = "${STAGING_LIBDIR}" +export KERNELSRC = "${STAGING_KERNEL_DIR}" +export CROSS_COMPILE = "${TARGET_PREFIX}" +export KERNELDIR = "${STAGING_KERNEL_DIR}" +export LDFLAGS = "" +export CP = "cp" diff --git a/meta-rcar-gen3/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_git.bb b/meta-rcar-gen3/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_git.bb new file mode 100644 index 0000000..7074970 --- /dev/null +++ b/meta-rcar-gen3/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_git.bb @@ -0,0 +1,55 @@ +DESCRIPTION = "ARM Trusted Firmware" + +LICENSE = "BSD" +LIC_FILES_CHKSUM = "file://license.md;md5=829bdeb34c1d9044f393d5a16c068371" + +PACKAGE_ARCH = "${MACHINE_ARCH}" + +inherit deploy +require include/multimedia-control.inc + +S = "${WORKDIR}/git" + +BRANCH = "rcar_gen3" +SRC_URI = "git://github.com/renesas-rcar/arm-trusted-firmware.git;branch=${BRANCH}" +SRCREV = "c040be5a757a945da75cf97d3a3e1db3a43168f9" + +PV = "v1.3+renesas+git${SRCPV}" + +COMPATIBLE_MACHINE = "(salvator-x|h3ulcb|m3ulcb)" +PLATFORM = "rcar" +ATFW_OPT_LOSSY = "${@base_conditional("USE_MULTIMEDIA", "1", "RCAR_LOSSY_ENABLE=1", "", d)}" +ATFW_OPT_r8a7795 = "LSI=H3 RCAR_DRAM_SPLIT=1 ${ATFW_OPT_LOSSY}" +ATFW_OPT_r8a7796 = "LSI=M3 RCAR_DRAM_SPLIT=2 ${ATFW_OPT_LOSSY}" + +# requires CROSS_COMPILE set by hand as there is no configure script +export CROSS_COMPILE="${TARGET_PREFIX}" + +# Let the Makefile handle setting up the CFLAGS and LDFLAGS as it is a standalone application +CFLAGS[unexport] = "1" +LDFLAGS[unexport] = "1" +AS[unexport] = "1" +LD[unexport] = "1" + +do_compile() { + oe_runmake bl2 bl31 dummytool PLAT=${PLATFORM} ${ATFW_OPT} +} + +# do_install() nothing +do_install[noexec] = "1" + +do_deploy() { + # Create deploy folder + install -d ${DEPLOYDIR} + + # Copy IPL to deploy folder + install -m 0644 ${S}/build/${PLATFORM}/release/bl2/bl2.elf ${DEPLOYDIR}/bl2-${MACHINE}.elf + install -m 0644 ${S}/build/${PLATFORM}/release/bl2.bin ${DEPLOYDIR}/bl2-${MACHINE}.bin + install -m 0644 ${S}/build/${PLATFORM}/release/bl2.srec ${DEPLOYDIR}/bl2-${MACHINE}.srec + install -m 0644 ${S}/build/${PLATFORM}/release/bl31/bl31.elf ${DEPLOYDIR}/bl31-${MACHINE}.elf + install -m 0644 ${S}/build/${PLATFORM}/release/bl31.bin ${DEPLOYDIR}/bl31-${MACHINE}.bin + install -m 0644 ${S}/build/${PLATFORM}/release/bl31.srec ${DEPLOYDIR}/bl31-${MACHINE}.srec + install -m 0644 ${S}/tools/dummy_create/bootparam_sa0.srec ${DEPLOYDIR}/bootparam_sa0.srec + install -m 0644 ${S}/tools/dummy_create/cert_header_sa6.srec ${DEPLOYDIR}/cert_header_sa6.srec +} +addtask deploy before do_build after do_compile diff --git a/meta-rcar-gen3/recipes-bsp/optee/optee-client/optee.service b/meta-rcar-gen3/recipes-bsp/optee/optee-client/optee.service new file mode 100644 index 0000000..4396f9f --- /dev/null +++ b/meta-rcar-gen3/recipes-bsp/optee/optee-client/optee.service @@ -0,0 +1,11 @@ +[Unit] +Description=optee services + +[Service] +ExecStartPre=/sbin/modprobe -q optee_armtz +ExecStart=/usr/bin/tee-supplicant +ExecStop=/usr/bin/killall -s KILL tee-supplicant +ExecStopPost=/sbin/modprobe -r optee_armtz + +[Install] +WantedBy=multi-user.target diff --git a/meta-rcar-gen3/recipes-bsp/optee/optee-client_git.bb b/meta-rcar-gen3/recipes-bsp/optee/optee-client_git.bb new file mode 100644 index 0000000..9efbfb5 --- /dev/null +++ b/meta-rcar-gen3/recipes-bsp/optee/optee-client_git.bb @@ -0,0 +1,58 @@ +DESCRIPTION = "OP-TEE Client" +LICENSE = "BSD-2-Clause" + +LIC_FILES_CHKSUM = "file://LICENSE;md5=69663ab153298557a59c67a60a743e5b" +PR = "r0" +PV = "1.1.0+renesas+git${SRCPV}" +BRANCH = "master" +SRC_URI = "git://github.com/OP-TEE/optee_client.git;branch=${BRANCH}" +SRCREV = "db9c64d45818d146200297eaaedbd421a8b59e3a" + +SRC_URI += " \ + file://optee.service \ +" + +inherit systemd +SYSTEMD_SERVICE_${PN} = "optee.service" + +COMPATIBLE_MACHINE = "salvator-x|h3ulcb|m3ulcb" + +PACKAGE_ARCH = "${MACHINE_ARCH}" + +S = "${WORKDIR}/git" + +EXTRA_OEMAKE = "RPMB_EMU=0" + +do_install () { + # Create destination directories + install -d ${D}/${libdir} + install -d ${D}/${includedir} + + # Install library + install -m 0755 ${S}/out/export/lib/libteec.so.1.0 ${D}/${libdir} + + # Create symbolic link + cd ${D}/${libdir} + ln -sf libteec.so.1.0 libteec.so.1 + ln -sf libteec.so.1 libteec.so + + # Install header files + install -m 0644 ${S}/out/export/include/* ${D}/${includedir} + + # Install systemd service configure file for OP-TEE client + if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)}; then + install -d ${D}/${systemd_system_unitdir} + install -m 0644 ${WORKDIR}/optee.service ${D}/${systemd_system_unitdir} + fi +} + +# install the tee-supplicant for 64 bit only. +do_install_append_aarch64 () { + # Create destination directory + install -d ${D}/${bindir} + + # Install binary to bindir + install -m 0755 ${S}/out/export/bin/tee-supplicant ${D}/${bindir} +} + +RPROVIDES_${PN} += "optee-client" diff --git a/meta-rcar-gen3/recipes-bsp/optee/optee-os_git.bb b/meta-rcar-gen3/recipes-bsp/optee/optee-os_git.bb new file mode 100644 index 0000000..5d99bfe --- /dev/null +++ b/meta-rcar-gen3/recipes-bsp/optee/optee-os_git.bb @@ -0,0 +1,67 @@ +DESCRIPTION = "OP-TEE OS" + +LICENSE = "BSD-2-Clause & BSD-3-Clause" +LIC_FILES_CHKSUM = " \ + file://LICENSE;md5=69663ab153298557a59c67a60a743e5b \ + file://lib/libpng/LICENSE;md5=06a1b6fde6d93170bb72201c8000bf3d \ + file://${WORKDIR}/git_official/LICENSE;md5=69663ab153298557a59c67a60a743e5b \ + file://${WORKDIR}/git_official/lib/libpng/LICENSE;md5=06a1b6fde6d93170bb72201c8000bf3d \ +" + +PACKAGE_ARCH = "${MACHINE_ARCH}" + +inherit deploy pythonnative + +PV = "2.2.0+renesas+git${SRCPV}" + +BRANCH = "rcar_gen3" +SRCREV_renesas = "fab553ef09322e8cca76e067282742b946f1ecb5" +SRCREV_officialgit = "c0c5d399d81a0669f5c8e3bcb20039d65649a78d" +SRCREV_FORMAT = "renesas_officialgit" + +SRC_URI = " \ + git://github.com/renesas-rcar/optee_os.git;branch=${BRANCH};name=renesas \ + git://github.com/OP-TEE/optee_os.git;branch=master;name=officialgit;destsuffix=git_official \ +" + +COMPATIBLE_MACHINE = "(salvator-x|h3ulcb|m3ulcb)" +PLATFORM = "rcar" + +DEPENDS = "python-wand-native python-pycrypto-native" + +# Needed so that python-wand can find the installed imagemagick install. +export MAGICK_HOME="${STAGING_DIR_NATIVE}${prefix}" + +export CROSS_COMPILE64="${TARGET_PREFIX}" + +# Let the Makefile handle setting up the flags as it is a standalone application +LD[unexport] = "1" +LDFLAGS[unexport] = "1" +export CCcore="${CC}" +export LDcore="${LD}" +libdir[unexport] = "1" + +S = "${WORKDIR}/git" +EXTRA_OEMAKE = "-e MAKEFLAGS=" + +do_configure() { + cp -r ${WORKDIR}/git_official/core/lib/libtomcrypt ${B}/core/lib/. +} + +do_compile() { + oe_runmake PLATFORM=${PLATFORM} CFG_ARM64_core=y +} + +# do_install() nothing +do_install[noexec] = "1" + +do_deploy() { + # Create deploy folder + install -d ${DEPLOYDIR} + + # Copy TEE OS to deploy folder + install -m 0644 ${S}/out/arm-plat-${PLATFORM}/core/tee.elf ${DEPLOYDIR}/tee-${MACHINE}.elf + install -m 0644 ${S}/out/arm-plat-${PLATFORM}/core/tee.bin ${DEPLOYDIR}/tee-${MACHINE}.bin + install -m 0644 ${S}/out/arm-plat-${PLATFORM}/core/tee.srec ${DEPLOYDIR}/tee-${MACHINE}.srec +} +addtask deploy before do_build after do_compile diff --git a/meta-rcar-gen3/recipes-bsp/qos/qosif-tp-user-module.bb b/meta-rcar-gen3/recipes-bsp/qos/qosif-tp-user-module.bb new file mode 100644 index 0000000..9d9b101 --- /dev/null +++ b/meta-rcar-gen3/recipes-bsp/qos/qosif-tp-user-module.bb @@ -0,0 +1,36 @@ +DESCRIPTION = "QOS Interface test app for R-Car Gen3" + +require qosif.inc + +DEPENDS = "qosif-user-module" +PN = "qosif-tp-user-module" +PR = "r0" + +S = "${WORKDIR}/git" +QOSIF_TP_DIR = "qos_if-tp-user/files/qos_if" + +includedir = "/usr/local/include" + +do_compile() { + cd ${S}/${QOSIF_TP_DIR} + oe_runmake +} + +do_install() { + # Create destination directory + install -d ${D}/usr/local/bin/ + + # Copy user test program + install -m 755 ${S}/${QOSIF_TP_DIR}/qos_tp ${D}/usr/local/bin/ +} + +PACKAGES = " \ + ${PN} \ + ${PN}-dbg \ +" + +FILES_${PN} = "/usr/local/bin/qos_tp" + +FILES_${PN}-dbg = " \ + /usr/local/bin/.debug/* \ +" diff --git a/meta-rcar-gen3/recipes-bsp/qos/qosif-user-module.bb b/meta-rcar-gen3/recipes-bsp/qos/qosif-user-module.bb new file mode 100644 index 0000000..d2871f2 --- /dev/null +++ b/meta-rcar-gen3/recipes-bsp/qos/qosif-user-module.bb @@ -0,0 +1,48 @@ +DESCRIPTION = "QOS Interface library for R-Car Gen3" + +require qosif.inc + +DEPENDS = "kernel-module-qos" +PN = "qosif-user-module" +PR = "r0" + +S = "${WORKDIR}/git" +QOSIF_LIB_DIR = "qos_if-module/files/qos_if" + +EXTRA_OEMAKE = "ARCH=${TARGET_ARCH}" + +includedir = "/usr/local/include" + +do_compile() { + # Build shared library + cd ${S}/${QOSIF_LIB_DIR}/if + rm -rf ${S}/${QOSIF_LIB_DIR}/if/libqos.so* + oe_runmake +} + +do_install() { + # Create destination directories + install -d ${D}/${libdir} + install -d ${D}/${includedir} + + # Copy shared library + install -m 755 ${S}/${QOSIF_LIB_DIR}/if/libqos.so* ${D}/${libdir}/ + cd ${D}/${libdir}/ + ln -sf libqos.so.1.0.0 libqos.so.1 + ln -sf libqos.so.1 libqos.so + + # Install shared header file + install -m 644 ${S}/${QOSIF_LIB_DIR}/include/qos_public.h ${D}/${includedir}/ +} + +PACKAGES = " \ + ${PN} \ + ${PN}-dev \ + ${PN}-dbg \ +" + +FILES_${PN} = " \ + ${libdir}/libqos.so* \ +" + +INSANE_SKIP_${PN} = "dev-so" diff --git a/meta-rcar-gen3/recipes-bsp/qos/qosif.inc b/meta-rcar-gen3/recipes-bsp/qos/qosif.inc new file mode 100644 index 0000000..a5d85ee --- /dev/null +++ b/meta-rcar-gen3/recipes-bsp/qos/qosif.inc @@ -0,0 +1,15 @@ +LICENSE = "MIT" +LIC_FILES_CHKSUM = " \ + file://COPYING.MIT;md5=96659f2a7571bfa27483882a653c3bb9 \ +" + +require include/rcar-gen3-modules-common.inc + +QOSIF_LIB_URL = "git://github.com/renesas-rcar/qos_lib.git" +BRANCH = "rcar-gen3" +SRCREV = "ae3bfdb6d8bcf99c73b30f82bb9a1418cc998d00" + +SRC_URI = "${QOSIF_LIB_URL};branch=${BRANCH}" + +# This module is machine specific. +PACKAGE_ARCH = "${MACHINE_ARCH}" diff --git a/meta-rcar-gen3/recipes-bsp/u-boot/u-boot_2015.04.bb b/meta-rcar-gen3/recipes-bsp/u-boot/u-boot_2015.04.bb new file mode 100644 index 0000000..1aa4961 --- /dev/null +++ b/meta-rcar-gen3/recipes-bsp/u-boot/u-boot_2015.04.bb @@ -0,0 +1,27 @@ +require recipes-bsp/u-boot/u-boot.inc + +DEPENDS += "dtc-native" + +UBOOT_URL = "git://github.com/renesas-rcar/u-boot.git" +BRANCH = "v2015.04/rcar-3.5.0" + +LIC_FILES_CHKSUM = "file://Licenses/README;md5=c7383a594871c03da76b3707929d2919" + +SRC_URI = "${UBOOT_URL};branch=${BRANCH}" +SRCREV = "1852a50412be4cd8b4f668d78003293e437e7ac2" + +PV = "v2015.04+git${SRCPV}" + +EXTRA_OEMAKE_append = " KCFLAGS=-fgnu89-inline" + +UBOOT_SREC ?= "u-boot-elf.srec" +UBOOT_SREC_IMAGE ?= "u-boot-elf-${MACHINE}-${PV}-${PR}.srec" +UBOOT_SREC_SYMLINK ?= "u-boot-elf-${MACHINE}.srec" + +do_deploy_append() { + install -m 644 ${S}/${UBOOT_SREC} ${DEPLOYDIR}/${UBOOT_SREC_IMAGE} + cd ${DEPLOYDIR} + rm -f ${UBOOT_SREC} ${UBOOT_SREC_SYMLINK} + ln -sf ${UBOOT_SREC_IMAGE} ${UBOOT_SREC_SYMLINK} + ln -sf ${UBOOT_SREC_IMAGE} ${UBOOT_SREC} +} diff --git a/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-tp-user-module.bb b/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-tp-user-module.bb new file mode 100644 index 0000000..5ea1596 --- /dev/null +++ b/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-tp-user-module.bb @@ -0,0 +1,52 @@ +DESCRIPTION = "Linux ICCOM library test applications for Renesas R-Car Gen3" + +require iccom-user-module.inc +require include/multimedia-control.inc + +DEPENDS = " \ + kernel-module-iccom-mfis \ + iccom-user-module \ + ${@base_conditional('USE_MULTIMEDIA', '1', 'mmngr-user-module', '', d )} \ +" + +export USE_MMNGR="${USE_MULTIMEDIA}" + +PN = "iccom-tp-user-module" +PR = "r0" + +S = "${WORKDIR}/libiccom" + +do_compile() { + cd ${S}/sample_test + make + + cd ${S}/sample_test_fatal + make + + cd ${S}/sample_sharedmem + make + + cd ${S}/sample_lock + make +} + +do_install() { + # Create destination directory + install -d ${D}/usr/local/bin + + # Install test applications + install -m 755 ${S}/sample_test/sample_test ${D}/usr/local/bin/ + install -m 755 ${S}/sample_test_fatal/sample_test_fatal ${D}/usr/local/bin/ + install -m 755 ${S}/sample_sharedmem/sample_sharedmem ${D}/usr/local/bin/ + install -m 755 ${S}/sample_lock/sample_lock ${D}/usr/local/bin/ +} + +FILES_${PN} = " \ + /usr/local/bin/sample_test \ + /usr/local/bin/sample_test_fatal \ + /usr/local/bin/sample_sharedmem \ + /usr/local/bin/sample_lock \ +" + +# Skip debug split +INHIBIT_PACKAGE_DEBUG_SPLIT = "1" diff --git a/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-user-module.bb b/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-user-module.bb new file mode 100644 index 0000000..a735271 --- /dev/null +++ b/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-user-module.bb @@ -0,0 +1,40 @@ +DESCRIPTION = "Linux ICCOM library for Renesas R-Car Gen3" + +require iccom-user-module.inc + +DEPENDS = " \ + kernel-module-iccom-mfis \ +" + +PN = "iccom-user-module" +PR = "r0" + +# log output level : INFO=0 LOW=1 MED=2 HIGH=3 ERROR=4 FATAL=5 NONE=255 +# (the setting of 4 means that ERROR and FATAL log are output) +export MEG_LEV="4" + +S = "${WORKDIR}/libiccom" +B = "${S}/source" + +do_install() { + # Create destination directories + install -d ${D}/${libdir} + install -d ${D}/usr/local/include + + # Install library + install -m 755 ${B}/libiccom.so ${D}/${libdir}/ + + # Install shared header file + install -m 644 ${S}/include/iccom_if_app.h ${D}/usr/local/include/ +} + +FILES_${PN} = " \ + ${libdir}/libiccom.so \ +" + +FILES_${PN}-dev = " \ + /usr/local/include/iccom_if_app.h \ +" + +# Skip debug split +INHIBIT_PACKAGE_DEBUG_SPLIT = "1" diff --git a/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-user-module.inc b/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-user-module.inc new file mode 100644 index 0000000..3cf8901 --- /dev/null +++ b/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-user-module.inc @@ -0,0 +1,9 @@ +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://COPYING.MIT;md5=442d4e9f738ff4d05ae6215ae20caa6c" + +require include/iccom-control.inc +inherit distro_features_check + +REQUIRED_DISTRO_FEATURES = "iccom" + +SRC_URI = "file://libiccom.tar.bz2" diff --git a/meta-rcar-gen3/recipes-core/images/core-image-minimal.bbappend b/meta-rcar-gen3/recipes-core/images/core-image-minimal.bbappend new file mode 100644 index 0000000..b1bd123 --- /dev/null +++ b/meta-rcar-gen3/recipes-core/images/core-image-minimal.bbappend @@ -0,0 +1 @@ +require recipes-graphics/images/core-image-renesas-base.inc diff --git a/meta-rcar-gen3/recipes-core/packagegroups/nativesdk-packagegroup-sdk-host.bbappend b/meta-rcar-gen3/recipes-core/packagegroups/nativesdk-packagegroup-sdk-host.bbappend new file mode 100644 index 0000000..dedfc6c --- /dev/null +++ b/meta-rcar-gen3/recipes-core/packagegroups/nativesdk-packagegroup-sdk-host.bbappend @@ -0,0 +1,4 @@ +# In YP2.1.2, nativesdk-wayland is lacking. +RDEPENDS_${PN}_append = " \ + ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'nativesdk-wayland nativesdk-wayland-dev', '', d)} \ +" diff --git a/meta-rcar-gen3/recipes-core/systemd/systemd_%.bbappend b/meta-rcar-gen3/recipes-core/systemd/systemd_%.bbappend new file mode 100644 index 0000000..f414a2b --- /dev/null +++ b/meta-rcar-gen3/recipes-core/systemd/systemd_%.bbappend @@ -0,0 +1 @@ +PACKAGECONFIG_remove = "timesyncd" diff --git a/meta-rcar-gen3/recipes-graphics/cogl/cogl-1.0_1.%.bbappend b/meta-rcar-gen3/recipes-graphics/cogl/cogl-1.0_1.%.bbappend new file mode 100644 index 0000000..f06b451 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/cogl/cogl-1.0_1.%.bbappend @@ -0,0 +1,4 @@ +require include/gles-control.inc +DEPENDS_append = " \ + ${@'gles-user-module libgbm' if '${USE_GLES_WAYLAND}' == '1' else ''} \ +" diff --git a/meta-rcar-gen3/recipes-graphics/drm/libdrm/fix_O_CLOEXEC_undeclared.patch b/meta-rcar-gen3/recipes-graphics/drm/libdrm/fix_O_CLOEXEC_undeclared.patch new file mode 100644 index 0000000..286e548 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/drm/libdrm/fix_O_CLOEXEC_undeclared.patch @@ -0,0 +1,24 @@ +drmdevice.c: define _GNU_SOURCE + +Include config.h to fix this build error with uclibc: + +libdrm-2.4.66/tests/drmdevice.c: In function 'main': +libdrm-2.4.66/tests/drmdevice.c:96:60: error: +'O_CLOEXEC' undeclared (first use in this function) +fd = open(devices[i]->nodes[j],O_RDONLY | O_CLOEXEC, 0); + +Upstream-Status: Pending + +Signed-off-by: Maxin B. John +--- +diff -Naur libdrm-2.4.66-orig/tests/drmdevice.c libdrm-2.4.66/tests/drmdevice.c +--- libdrm-2.4.66-orig/tests/drmdevice.c 2016-02-23 11:34:02.054904502 +0200 ++++ libdrm-2.4.66/tests/drmdevice.c 2016-02-23 11:35:34.371750383 +0200 +@@ -21,6 +21,7 @@ + * + */ + ++#include + #include + #include + #include diff --git a/meta-rcar-gen3/recipes-graphics/drm/libdrm/installtests.patch b/meta-rcar-gen3/recipes-graphics/drm/libdrm/installtests.patch new file mode 100644 index 0000000..30e0a61 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/drm/libdrm/installtests.patch @@ -0,0 +1,15 @@ +tests: also install tests app + +Upstream-Status: Inappropriate [configuration] + +Signed-off-by: Yu Ke + +Index: libdrm-2.4.66/tests/Makefile.am +=================================================================== +--- libdrm-2.4.66.orig/tests/Makefile.am ++++ libdrm-2.4.66/tests/Makefile.am +@@ -73,3 +73,4 @@ TESTS += \ + endif + + check_PROGRAMS += $(TESTS) ++bin_PROGRAMS = $(check_PROGRAMS) diff --git a/meta-rcar-gen3/recipes-graphics/drm/libdrm_2.4.68.bb b/meta-rcar-gen3/recipes-graphics/drm/libdrm_2.4.68.bb new file mode 100644 index 0000000..758f801 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/drm/libdrm_2.4.68.bb @@ -0,0 +1,45 @@ +SUMMARY = "Userspace interface to the kernel DRM services" +DESCRIPTION = "The runtime library for accessing the kernel DRM services. DRM \ +stands for \"Direct Rendering Manager\", which is the kernel portion of the \ +\"Direct Rendering Infrastructure\" (DRI). DRI is required for many hardware \ +accelerated OpenGL drivers." +HOMEPAGE = "http://dri.freedesktop.org" +SECTION = "x11/base" +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://xf86drm.c;beginline=9;endline=32;md5=c8a3b961af7667c530816761e949dc71" +PROVIDES = "drm" +DEPENDS = "libpthread-stubs udev libpciaccess" + +SRC_URI = "http://dri.freedesktop.org/libdrm/${BP}.tar.bz2 \ + file://installtests.patch \ + file://fix_O_CLOEXEC_undeclared.patch \ + " + +SRC_URI[md5sum] = "bcc96848d969cecf28223f668eeff354" +SRC_URI[sha256sum] = "5b4bd9a5922929bc716411cb74061fbf31b06ba36feb89bc1358a91a8d0ca9df" + +inherit autotools pkgconfig + +EXTRA_OECONF += "--disable-cairo-tests \ + --enable-omap-experimental-api \ + --enable-install-test-programs \ + --disable-manpages \ + --disable-valgrind \ + " + +ALLOW_EMPTY_${PN}-drivers = "1" +PACKAGES =+ "${PN}-tests ${PN}-drivers ${PN}-radeon ${PN}-nouveau ${PN}-omap \ + ${PN}-intel ${PN}-exynos ${PN}-kms ${PN}-freedreno ${PN}-amdgpu" + +RRECOMMENDS_${PN}-drivers = "${PN}-radeon ${PN}-nouveau ${PN}-omap ${PN}-intel \ + ${PN}-exynos ${PN}-freedreno ${PN}-amdgpu" + +FILES_${PN}-tests = "${bindir}/*" +FILES_${PN}-radeon = "${libdir}/libdrm_radeon.so.*" +FILES_${PN}-nouveau = "${libdir}/libdrm_nouveau.so.*" +FILES_${PN}-omap = "${libdir}/libdrm_omap.so.*" +FILES_${PN}-intel = "${libdir}/libdrm_intel.so.*" +FILES_${PN}-exynos = "${libdir}/libdrm_exynos.so.*" +FILES_${PN}-kms = "${libdir}/libkms*.so.*" +FILES_${PN}-freedreno = "${libdir}/libdrm_freedreno.so.*" +FILES_${PN}-amdgpu = "${libdir}/libdrm_amdgpu.so.*" diff --git a/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module.bb b/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module.bb new file mode 100644 index 0000000..939c61b --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module.bb @@ -0,0 +1,126 @@ +require include/gles-control.inc + +DESCRIPTION = "PowerVR GPU user module" +LICENSE = "CLOSED" + +PN = "gles-user-module" +PR = "r0" + +COMPATIBLE_MACHINE = "(r8a7795|r8a7796)" +PACKAGE_ARCH = "${MACHINE_ARCH}" + +S = "${WORKDIR}/rogue" +GLES = "gsx" + +SRC_URI_r8a7795 = "file://r8a7795_linux_gsx_binaries_gles3.tar.bz2" +SRC_URI_r8a7796 = "file://r8a7796_linux_gsx_binaries_gles3.tar.bz2" +SRC_URI_append = " \ + file://change-shell.patch \ + file://0001-EGL-eglext.h-Include-eglmesaext.h-to-avoid-compile-error.patch \ + file://rc.pvr.service \ +" + +inherit update-rc.d systemd + +INITSCRIPT_NAME = "rc.pvr" +INITSCRIPT_PARAMS = "start 7 5 2 . stop 62 0 1 6 ." +SYSTEMD_SERVICE_${PN} = "rc.pvr.service" + +do_populate_lic[noexec] = "1" +do_compile[noexec] = "1" + +do_install() { + # Install configuration files + install -d ${D}/${sysconfdir}/init.d + install -m 644 ${S}/${sysconfdir}/powervr.ini ${D}/${sysconfdir} + install -m 755 ${S}/${sysconfdir}/init.d/rc.pvr ${D}/${sysconfdir}/init.d/ + install -d ${D}/${sysconfdir}/udev/rules.d + install -m 644 ${S}/${sysconfdir}/udev/rules.d/72-pvr-seat.rules ${D}/${sysconfdir}/udev/rules.d/ + + # Install header files + install -d ${D}/${includedir}/EGL + install -m 644 ${S}/${includedir}/EGL/*.h ${D}/${includedir}/EGL/ + install -d ${D}/${includedir}/GLES2 + install -m 644 ${S}/${includedir}/GLES2/*.h ${D}/${includedir}/GLES2/ + install -d ${D}/${includedir}/GLES3 + install -m 644 ${S}/${includedir}/GLES3/*.h ${D}/${includedir}/GLES3/ + install -d ${D}/${includedir}/KHR + install -m 644 ${S}/${includedir}/KHR/khrplatform.h ${D}/${includedir}/KHR/khrplatform.h + + # Install pre-builded binaries + install -d ${D}/${libdir} + install -m 755 ${S}/${libdir}/*.so ${D}/${libdir}/ + install -d ${D}/${exec_prefix}/local/bin + install -m 755 ${S}/${exec_prefix}/local/bin/dlcsrv_REL ${D}/${exec_prefix}/local/bin/dlcsrv_REL + install -d ${D}/lib/firmware + install -m 644 ${S}/lib/firmware/rgx.fw ${D}/lib/firmware/ + + # Install pkgconfig + install -d ${D}/${libdir}/pkgconfig + install -m 644 ${S}/${libdir}/pkgconfig/*.pc ${D}/${libdir}/pkgconfig/ + + # Create symbolic link + cd ${D}/${libdir} + ln -s libEGL.so libEGL.so.1 + ln -s libGLESv2.so libGLESv2.so.2 + + if [ "${USE_GLES_WAYLAND}" = "1" ]; then + # Set the "WindowSystem" parameter for wayland + if [ "${GLES}" = "gsx" ]; then + sed -i -e "s/WindowSystem=libpvrDRM_WSEGL.so/WindowSystem=libpvrWAYLAND_WSEGL.so/g" \ + ${D}/${sysconfdir}/powervr.ini + fi + fi + + # Install systemd service + if [ ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)} ]; then + install -d ${D}/${systemd_system_unitdir}/ + install -m 644 ${WORKDIR}/rc.pvr.service ${D}/${systemd_system_unitdir}/ + fi +} + +PACKAGES = "\ + ${PN} \ + ${PN}-dev \ +" + +FILES_${PN} = " \ + ${sysconfdir}/* \ + ${libdir}/* \ + /lib/firmware/rgx.fw \ + /usr/local/bin/* \ +" + +FILES_${PN}-dev = " \ + ${includedir}/* \ + ${libdir}/pkgconfig/* \ +" + +PROVIDES = "virtual/libgles2 virtual/egl" +RPROVIDES_${PN} += " \ + ${GLES}-user-module \ + libgles2-mesa \ + libgles2-mesa-dev \ + libgles2 \ + libgles2-dev \ + libegl \ + libegl1 \ +" + +RDEPENDS_${PN} = " \ + kernel-module-gles \ + ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'libgbm wayland-kms', '', d)} \ +" + +INSANE_SKIP_${PN} = "ldflags build-deps file-rdeps" +INSANE_SKIP_${PN}-dev = "ldflags build-deps file-rdeps" +INSANE_SKIP_${PN} += "arch" +INSANE_SKIP_${PN}-dev += "arch" +INSANE_SKIP_${PN}-dbg = "arch" + +# Skip debug strip of do_populate_sysroot() +INHIBIT_SYSROOT_STRIP = "1" + +# Skip debug split and strip of do_package() +INHIBIT_PACKAGE_DEBUG_SPLIT = "1" +INHIBIT_PACKAGE_STRIP = "1" diff --git a/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/0001-EGL-eglext.h-Include-eglmesaext.h-to-avoid-compile-error.patch b/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/0001-EGL-eglext.h-Include-eglmesaext.h-to-avoid-compile-error.patch new file mode 100644 index 0000000..b8fde11 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/0001-EGL-eglext.h-Include-eglmesaext.h-to-avoid-compile-error.patch @@ -0,0 +1,25 @@ +From b1e6a6ea447e01af0a31dfba44510aea23f2ffa8 Mon Sep 17 00:00:00 2001 +From: Tomohiro Komagata +Date: Thu, 17 Nov 2016 14:41:05 +0900 +Subject: [PATCH] EGL: eglext.h: Include eglmesaext.h to avoid compile error + +--- + usr/include/EGL/eglext.h | 2 ++ + 1 file changed, 2 insertions(+) + +diff --git a/usr/include/EGL/eglext.h b/usr/include/EGL/eglext.h +index de119f6..243da4a 100644 +--- a/usr/include/EGL/eglext.h ++++ b/usr/include/EGL/eglext.h +@@ -645,6 +645,8 @@ EGLAPI EGLuint64NV EGLAPIENTRY eglGetSystemTimeNV (void); + #endif /* KHRONOS_SUPPORT_INT64 */ + #endif /* EGL_NV_system_time */ + ++#include ++ + #ifdef __cplusplus + } + #endif +-- +1.9.1 + diff --git a/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/change-shell.patch b/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/change-shell.patch new file mode 100644 index 0000000..1dd22f4 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/change-shell.patch @@ -0,0 +1,8 @@ +--- a/etc/init.d/rc.pvr 2014-08-01 09:56:47.528824893 +0900 ++++ b/etc/init.d/rc.pvr 2014-08-01 09:56:55.744827677 +0900 +@@ -1,4 +1,4 @@ +-#!/bin/bash ++#!/bin/sh + ############################################################################ ### + #@Copyright Copyright (c) Imagination Technologies Ltd. All Rights Reserved + #@License Strictly Confidential. diff --git a/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/rc.pvr.service b/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/rc.pvr.service new file mode 100644 index 0000000..fa7ad7b --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/rc.pvr.service @@ -0,0 +1,11 @@ +[Unit] +Description=PowerVR consumer services + +[Service] +ExecStart=/etc/init.d/rc.pvr start +ExecStop=/etc/init.d/rc.pvr stop +Type=oneshot +RemainAfterExit=yes + +[Install] +WantedBy=multi-user.target diff --git a/meta-rcar-gen3/recipes-graphics/images/core-image-renesas-base.inc b/meta-rcar-gen3/recipes-graphics/images/core-image-renesas-base.inc new file mode 100644 index 0000000..c1081ce --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/images/core-image-renesas-base.inc @@ -0,0 +1,67 @@ +require include/iccom-control.inc + +# Basic packages +IMAGE_INSTALL_append = " \ + bash \ + v4l-utils \ + i2c-tools \ +" + +# Support secure environment +IMAGE_INSTALL_append = " \ + optee-linuxdriver \ + optee-linuxdriver-armtz \ + optee-client \ +" + +# Add overrides for selection 32 bit or 64 bit target +OVERRIDES .= ":${TARGET_SYS}" + +# Qos user packages only supports 64bit. +QOS_USER_PKGS = "" +QOS_USER_PKGS_aarch64-poky-linux = " \ + qosif-user-module \ + qosif-tp-user-module \ +" + +# Installation for QoS packages +IMAGE_INSTALL_append = " \ + kernel-module-qos \ + ${QOS_USER_PKGS} \ +" + +# Renesas Basic packages for 32bit +BASIC_32BIT_PKGS = " \ + lib32-coreutils \ + lib32-libstdc++ \ + lib32-optee-client \ +" + +# Installation for 32bit packages +IMAGE_INSTALL_append = " \ + ${@base_conditional("USE_32BIT_PKGS", "1", "${BASIC_32BIT_PKGS}", "", d)} \ +" + +# Kernel modules of ICCOM +ICCOM_KERNEL_PKGS = " \ + kernel-module-iccom-mfis \ + kernel-module-iccom-hwspinlock-sample \ +" + +# User modules of ICCOM only supports 64bit +ICCOM_USER_PKGS = "" +ICCOM_USER_PKGS_aarch64-poky-linux = " \ + iccom-user-module \ + iccom-tp-user-module \ +" + +# ICCOM Packages +ICCOM_PKGS = " \ + ${ICCOM_KERNEL_PKGS} \ + ${ICCOM_USER_PKGS} \ +" + +# Installation for ICCOM Packages +IMAGE_INSTALL_append = " \ + ${@base_conditional("USE_ICCOM", "1", " ${ICCOM_PKGS}", "", d)} \ +" diff --git a/meta-rcar-gen3/recipes-graphics/images/core-image-renesas-mmp-base.inc b/meta-rcar-gen3/recipes-graphics/images/core-image-renesas-mmp-base.inc new file mode 100644 index 0000000..7c85d04 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/images/core-image-renesas-mmp-base.inc @@ -0,0 +1,96 @@ +require include/multimedia-control.inc +require include/cms-control.inc +require include/adsp-control.inc +require include/dtv-dvd-control.inc +require include/avb-control.inc +require include/omx-control.inc + +# Common Multi Media Packages (MMP) +MULTIMEDIA_PKGS = " \ + packagegroup-multimedia-kernel-modules \ + packagegroup-multimedia-libs \ +" + +# MMP test Packages +MULTIMEDIA_TP_PKGS = " \ + vspmif-tp-user-module \ +" + +# OMX MMP Packages +OMX_MULTIMEDIA_PKGS = " \ + omx-user-module \ +" + +# CMS MMP Packages +CMS_MULTIMEDIA_PKGS = " \ + cms-user-module \ +" + +# Kernel modules of DTV +DTV_KERNEL_PKGS = " \ + kernel-module-scu-src \ + kernel-module-ssp \ + kernel-module-tddmac \ + kernel-module-tsif \ +" + +# DTV Packages +DTV_PKGS = " \ + ${DTV_KERNEL_PKGS} \ + dtv-user-module \ +" + +# DVD Packages +DVD_PKGS = " \ + dvd-user-module \ +" + +# ADSP Packages +ADSP_PKGS = " \ + kernel-module-xtensa-hifi \ + adsp-if-module \ + adsp-fw-module \ +" + +# Kernel modules of AVB +AVB_KERNEL_PKGS = " \ + kernel-module-avb-streaming \ + kernel-module-avb-mch \ + kernel-module-avb-mse \ +" + +# AVB Packages +AVB_PKGS = " \ + ${AVB_KERNEL_PKGS} \ + avbtool \ + linuxptp \ + open-avb-mrpd \ + open-avb-gptp \ + open-avb-maap \ + avb-demoapps-avblauncher \ + avb-demoapps-mrpdummy \ + avb-demoapps-simple \ +" + +# Renesas MMP 32bit packages +MMP_32BIT_PKGS = " \ + ${@base_conditional("USE_MULTIMEDIA", "1", "lib32-packagegroup-multimedia-libs lib32-omx-user-module", "", d)} \ + ${@base_conditional("USE_MULTIMEDIA_TP", "1", "lib32-vspmif-tp-user-module", "", d)} \ + ${@base_conditional("USE_CMS", "1", "lib32-cms-user-module", "", d)} \ + ${@base_conditional("USE_DTV", "1", "lib32-dtv-user-module", "", d)} \ + ${@base_conditional("USE_DVD", "1", "lib32-dvd-user-module", "", d)} \ + ${@base_conditional("USE_ADSP", "1", "lib32-adsp-if-module", "", d)} \ +" + +# Install pkg selection +IMAGE_INSTALL_append = " \ + ${@base_conditional("USE_MULTIMEDIA", "1", " ${MULTIMEDIA_PKGS}", "", d)} \ + ${@base_conditional("USE_MULTIMEDIA_TP", "1", " ${MULTIMEDIA_TP_PKGS}", "", d)} \ + ${@base_conditional("USE_OMX_USER_MODULE", "1", " ${OMX_MULTIMEDIA_PKGS}", "", d)} \ + ${@base_conditional("USE_CMS", "1", " ${CMS_MULTIMEDIA_PKGS}", "", d)} \ + ${@base_conditional("USE_DTV", "1", " ${DTV_PKGS}", "", d)} \ + ${@base_conditional("USE_DVD", "1", " ${DVD_PKGS}", "", d)} \ + ${@base_conditional("USE_ADSP", "1", " ${ADSP_PKGS}", "", d)} \ + ${@base_conditional("USE_AVB", "1", " ${AVB_PKGS}", "", d)} \ + ${@base_conditional("USE_32BIT_MMP", "1", " ${MMP_32BIT_PKGS}", "", d)} \ +" diff --git a/meta-rcar-gen3/recipes-graphics/images/core-image-weston-sdk.bb b/meta-rcar-gen3/recipes-graphics/images/core-image-weston-sdk.bb new file mode 100644 index 0000000..fd4e6a0 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/images/core-image-weston-sdk.bb @@ -0,0 +1,15 @@ +require recipes-graphics/images/core-image-weston.bb +require core-image-renesas-base.inc +require core-image-weston.inc + +DESCRIPTION = "Image with weston support that includes everything within \ +core-image-weston plus meta-toolchain, development headers and libraries to \ +form a standalone SDK." + +IMAGE_FEATURES += " \ + dev-pkgs tools-sdk \ + tools-debug debug-tweaks \ + ssh-server-openssh \ +" + +IMAGE_INSTALL_append = " kernel-devsrc ltp" diff --git a/meta-rcar-gen3/recipes-graphics/images/core-image-weston.bbappend b/meta-rcar-gen3/recipes-graphics/images/core-image-weston.bbappend new file mode 100644 index 0000000..e30bc2e --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/images/core-image-weston.bbappend @@ -0,0 +1,2 @@ +require core-image-renesas-base.inc +require core-image-weston.inc diff --git a/meta-rcar-gen3/recipes-graphics/images/core-image-weston.inc b/meta-rcar-gen3/recipes-graphics/images/core-image-weston.inc new file mode 100644 index 0000000..28e28d4 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/images/core-image-weston.inc @@ -0,0 +1,42 @@ +require include/gles-control.inc +require core-image-renesas-mmp-base.inc + +# Wayland basic packages +WAYLAND_BASE_PKGS = " \ + weston-bin \ + alsa-utils \ + alsa-tools \ + libdrm-tests \ + libdrm-kms \ +" + +# GFX for Wayland packages +WAYLAND_GLES_PKGS = "libgbm-dev" + +# GFX driver and library packages +GLES_PKGS = " \ + kernel-module-gles \ + gles-user-module \ +" + +# Gstreamer Packages +GSTREAMER_PKGS = "packagegroup-gstreamer1.0-plugins" + +# 32bit packages for wayland env +WAYLAND_32BIT_PKGS = " \ + lib32-weston \ + lib32-libdrm \ + lib32-libdrm-kms \ + ${@base_conditional("USE_GLES", "1", "lib32-gles-user-module", "", d)} \ +" + +# Install packages for Wayland Env +# default: Basic packages, Gstreamer packages +# optional: GFX packages +IMAGE_INSTALL_append = " \ + ${WAYLAND_BASE_PKGS} \ + ${GSTREAMER_PKGS} \ + ${@base_conditional("USE_GLES", "1", "${GLES_PKGS}", "", d)} \ + ${@base_conditional("USE_GLES_WAYLAND", "1", "${WAYLAND_GLES_PKGS}", "", d)} \ + ${@base_conditional("USE_32BIT_WAYLAND", "1", "${WAYLAND_32BIT_PKGS}", "", d)} \ +" diff --git a/meta-rcar-gen3/recipes-graphics/mesa/mesa-dummy.inc b/meta-rcar-gen3/recipes-graphics/mesa/mesa-dummy.inc new file mode 100644 index 0000000..e69de29 diff --git a/meta-rcar-gen3/recipes-graphics/mesa/mesa-wayland.inc b/meta-rcar-gen3/recipes-graphics/mesa/mesa-wayland.inc new file mode 100644 index 0000000..660cde3 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/mesa/mesa-wayland.inc @@ -0,0 +1,36 @@ +# FIXME: can not override PACKAGECONFIG. +PACKAGECONFIG[gles] = "--enable-gles1 --disable-gles2" +PACKAGECONFIG[egl] = "--enable-egl --with-egl-platforms=wayland" + +# Disable the gbm modules of mesa +PACKAGECONFIG_remove = "gbm" + +# Remove the gbm and egl packages. These are provided in other recipes. +PACKAGES_remove = " \ + libgbm-dev libgbm \ + libegl-mesa-dev libegl-mesa \ + libegl-dev libegl \ + libgles2-mesa libgles2-mesa-dev \ +" +INSTALLED_HEADER = "src/egl/wayland/wayland-egl/wayland-egl-priv.h" + +do_install_append() { + # Remove libegl-mesa modules and headers + rm -f ${D}/${libdir}/libEGL.la + rm -f ${D}/${libdir}/libEGL.so* + rm -f ${D}/${libdir}/pkgconfig/egl.pc + rm -rf ${D}/${includedir}/EGL + rm -rf ${D}/${includedir}/KHR + + # For Qt environment + install -Dm 644 ${S}/include/EGL/eglmesaext.h ${D}/${includedir}/EGL/eglmesaext.h + + # install required header for wayland + install -d ${D}/usr/include + install -m 644 ${S}/${INSTALLED_HEADER} ${D}/usr/include/ +} + +FILES_libwayland-egl-dev += " \ + /usr/include \ + /usr/include/*.h \ +" diff --git a/meta-rcar-gen3/recipes-graphics/mesa/mesa_11.%.bbappend b/meta-rcar-gen3/recipes-graphics/mesa/mesa_11.%.bbappend new file mode 100644 index 0000000..e1b7ad2 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/mesa/mesa_11.%.bbappend @@ -0,0 +1,10 @@ +require include/gles-control.inc + +def map_libs(d): + if base_conditional('USE_GLES_WAYLAND', "1", "1", "0", d) == "1": + return "wayland" + + return "dummy" + +MESATARGET := "${@map_libs(d)}" +include mesa-${MESATARGET}.inc diff --git a/meta-rcar-gen3/recipes-graphics/wayland/libgbm.bb b/meta-rcar-gen3/recipes-graphics/wayland/libgbm.bb new file mode 100644 index 0000000..64b0681 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/wayland/libgbm.bb @@ -0,0 +1,35 @@ +SUMMARY = "gbm library" +LICENSE = "MIT" +SECTION = "libs" + +LIC_FILES_CHKSUM = " \ + file://gbm.c;beginline=4;endline=22;md5=5cdaac262c876e98e47771f11c7036b5" + +SRCREV = "bc04aefc9d5322f8b2dc1ecb15d0713bbab684b8" +SRC_URI = "git://github.com/renesas-rcar/libgbm;branch=rcar-gen3" + +S = "${WORKDIR}/git" + +COMPATIBLE_MACHINE = "(r8a7795|r8a7796)" +DEPENDS = "wayland-kms" + +inherit autotools pkgconfig + +PACKAGES = " \ + ${PN} \ + ${PN}-dev \ + ${PN}-dbg \ + ${PN}-staticdev \ +" + +FILES_${PN} = " \ + ${libdir}/libgbm.so.* \ + ${libdir}/gbm/libgbm_kms.so.* \ + ${libdir}/gbm/*.so \ + ${libdir}/*.so \ +" +FILES_${PN}-dev += "${libdir}/gbm/*.la" +FILES_${PN}-dbg += "${libdir}/gbm/.debug/*" +FILES_${PN}-staticdev += "${libdir}/gbm/*.a" + +INSANE_SKIP_${PN} += "dev-so" diff --git a/meta-rcar-gen3/recipes-graphics/wayland/libinput/touchpad-serial-synaptics-need-to-fake-new-touches-on-TRIPLETAP.patch b/meta-rcar-gen3/recipes-graphics/wayland/libinput/touchpad-serial-synaptics-need-to-fake-new-touches-on-TRIPLETAP.patch new file mode 100644 index 0000000..b52b496 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/wayland/libinput/touchpad-serial-synaptics-need-to-fake-new-touches-on-TRIPLETAP.patch @@ -0,0 +1,72 @@ +This is a workaround upstream suggests for use with kernel 4.1. + +Upstream-Status: Inappropriate [temporary work-around] +Signed-off-by: Jussi Kukkonen + + + +From: Peter Hutterer +Date: Mon Aug 3 18:23:12 PDT 2015 +Subject: [PATCH v3 libinput] touchpad: serial synaptics need to fake new touches on TRIPLETAP + +On the 4.1 kernels synaptics pretends to have 3 slots (the serial fw only does +2). This was added to avoid cursor jumps but has since been reverted for 4.2 +(kernel commit dbf3c37086, 4.1.3 is still buggy). In some cases a TRIPLETAP +may be triggered without slot 2 ever activating. + +While there are still those kernels out there, work around this bug by opening +a new touch point where none exists if the fake finger count exceeds the slot +count. + +Reported-by: Jan Alexander Steffens +Signed-off-by: Peter Hutterer +Tested-by: Jan Alexander Steffens +Reviewed-by: Hans de Goede +--- +Changes to v2: +- split out the handling instead of having a tmp state variable, see Hans' + comments from v2 + +Mainly sending this to the list again so I have a link to point people to. +If you're on 4.1.x add this patch to your distribution package. + + src/evdev-mt-touchpad.c | 22 ++++++++++++++++------ + 1 file changed, 16 insertions(+), 6 deletions(-) + +diff --git a/src/evdev-mt-touchpad.c b/src/evdev-mt-touchpad.c +index a683d9a..5ef03d5 100644 +--- a/src/evdev-mt-touchpad.c ++++ b/src/evdev-mt-touchpad.c +@@ -369,13 +369,23 @@ tp_restore_synaptics_touches(struct tp_dispatch *tp, + for (i = 0; i < tp->num_slots; i++) { + struct tp_touch *t = tp_get_touch(tp, i); + +- if (t->state != TOUCH_END) ++ switch(t->state) { ++ case TOUCH_HOVERING: ++ case TOUCH_BEGIN: ++ case TOUCH_UPDATE: + continue; +- +- /* new touch, move it through begin to update immediately */ +- tp_new_touch(tp, t, time); +- tp_begin_touch(tp, t, time); +- t->state = TOUCH_UPDATE; ++ case TOUCH_NONE: ++ /* new touch, move it through to begin immediately */ ++ tp_new_touch(tp, t, time); ++ tp_begin_touch(tp, t, time); ++ break; ++ case TOUCH_END: ++ /* touch just ended ,we need need to restore it to update */ ++ tp_new_touch(tp, t, time); ++ tp_begin_touch(tp, t, time); ++ t->state = TOUCH_UPDATE; ++ break; ++ } + } + } + +-- +2.4.3 + diff --git a/meta-rcar-gen3/recipes-graphics/wayland/libinput_1.4.1.bb b/meta-rcar-gen3/recipes-graphics/wayland/libinput_1.4.1.bb new file mode 100644 index 0000000..c3905f3 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/wayland/libinput_1.4.1.bb @@ -0,0 +1,23 @@ +SUMMARY = "Library to handle input devices in Wayland compositors" +HOMEPAGE = "http://www.freedesktop.org/wiki/Software/libinput/" +SECTION = "libs" + +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://COPYING;md5=2184aef38ff137ed33ce9a63b9d1eb8f" + +DEPENDS = "libevdev udev mtdev" + +SRC_URI = "http://www.freedesktop.org/software/${BPN}/${BP}.tar.xz \ + file://touchpad-serial-synaptics-need-to-fake-new-touches-on-TRIPLETAP.patch \ +" +SRC_URI[md5sum] = "2e7ba577ed74d8d1baeb07dbd4fb912a" +SRC_URI[sha256sum] = "26e7b3ab499358caba499705680ea7e5851af2bd37dc32f2be64181610d6392a" + +inherit autotools pkgconfig + +PACKAGECONFIG ??= "" +PACKAGECONFIG[libunwind] = "--with-libunwind,--without-libunwind,libunwind" +PACKAGECONFIG[libwacom] = "--enable-libwacom,--disable-libwacom,libwacom" +PACKAGECONFIG[gui] = "--enable-event-gui,--disable-event-gui,cairo gtk+3" + +FILES_${PN} += "${libdir}/udev/" diff --git a/meta-rcar-gen3/recipes-graphics/wayland/wayland-kms_1.6.0.bb b/meta-rcar-gen3/recipes-graphics/wayland/wayland-kms_1.6.0.bb new file mode 100644 index 0000000..23ffcca --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/wayland/wayland-kms_1.6.0.bb @@ -0,0 +1,25 @@ +SUMMARY = "KMS library for Wayland" +LICENSE = "MIT" + +LIC_FILES_CHKSUM = " \ + file://wayland-kms.c;beginline=6;endline=24;md5=5cdaac262c876e98e47771f11c7036b5" + +PV_append = "+git${SRCREV}" + +SRCREV = "a1539fe24125d581c53a18e1e6b6d4958f672a77" +SRC_URI = "git://github.com/renesas-rcar/wayland-kms.git;branch=rcar-gen3" + +COMPATIBLE_MACHINE = "(r8a7795|r8a7796)" +S = "${WORKDIR}/git" +DEPENDS = "libdrm wayland gles-user-module" + +inherit autotools pkgconfig + +FILES_${PN} = "${libdir}/libwayland-kms.so.*" +FILES_${PN}-dev = " \ + ${libdir}/libwayland-kms.la \ + ${libdir}/libwayland-kms.so \ + ${libdir}/pkgconfig/* \ + ${includedir}/* \ +" +FILES_${PN}-staticdev += "${libdir}/libwayland-kms.a" diff --git a/meta-rcar-gen3/recipes-graphics/wayland/wayland-protocols_1.7.bb b/meta-rcar-gen3/recipes-graphics/wayland/wayland-protocols_1.7.bb new file mode 100644 index 0000000..1d2f0db --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/wayland/wayland-protocols_1.7.bb @@ -0,0 +1,20 @@ +SUMMARY = "Collection of additional Wayland protocols" +DESCRIPTION = "Wayland protocols that add functionality not \ +available in the Wayland core protocol. Such protocols either add \ +completely new functionality, or extend the functionality of some other \ +protocol either in Wayland core, or some other protocol in \ +wayland-protocols." +HOMEPAGE = "http://wayland.freedesktop.org" +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://COPYING;md5=c7b12b6702da38ca028ace54aae3d484 \ + file://stable/presentation-time/presentation-time.xml;endline=26;md5=4646cd7d9edc9fa55db941f2d3a7dc53" + +SRC_URI = "https://wayland.freedesktop.org/releases/${BPN}-${PV}.tar.xz \ + " +SRC_URI[md5sum] = "9acfc9556f7cfedc44d97af60da66a5f" +SRC_URI[sha256sum] = "635f2a937d318f1fecb97b54074ca211486e38af943868dd0fa82ea38d091c1f" + +inherit allarch autotools pkgconfig + +PACKAGES = "${PN}" +FILES_${PN} += "${datadir}/pkgconfig/wayland-protocols.pc" diff --git a/meta-rcar-gen3/recipes-graphics/wayland/wayland-protocols_1.7.bbappend b/meta-rcar-gen3/recipes-graphics/wayland/wayland-protocols_1.7.bbappend new file mode 100644 index 0000000..561dfd9 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/wayland/wayland-protocols_1.7.bbappend @@ -0,0 +1,10 @@ +# In YP2.1.2, /sysroot/usr/share/pkgconfig is not included in PKG_CONFIG_PATH. +# An Installation directory is moved to /usr/lib from /usr/share +# In latest master branch, this problem was fixed by e0bcf333. +do_install_append () { + install -d ${D}/${libdir}/pkgconfig + install -m 0644 ${D}/${datadir}/pkgconfig/wayland-protocols.pc ${D}/${libdir}/pkgconfig/ + rm -rf ${D}/${datadir}/pkgconfig +} + +FILES_${PN} += "${libdir}/pkgconfig/wayland-protocols.pc" diff --git a/meta-rcar-gen3/recipes-graphics/wayland/wayland/0001-scanner-Use-unit32_t-instead-of-uint.patch b/meta-rcar-gen3/recipes-graphics/wayland/wayland/0001-scanner-Use-unit32_t-instead-of-uint.patch new file mode 100644 index 0000000..dece95c --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/wayland/wayland/0001-scanner-Use-unit32_t-instead-of-uint.patch @@ -0,0 +1,30 @@ +From 5516d32e694badca35b6c71b02a3f08f650308bf Mon Sep 17 00:00:00 2001 +From: Khem Raj +Date: Fri, 15 Jul 2016 16:23:48 -0700 +Subject: [PATCH] scanner: Use unit32_t instead of uint + +uint32_t is C99 defined stdint type + +Signed-off-by: Khem Raj +Signed-off-by: Jussi Kukkonen +Upstream-Status: Submitted +--- + src/scanner.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/src/scanner.c b/src/scanner.c +index 5f06e8e..10a4023 100644 +--- a/src/scanner.c ++++ b/src/scanner.c +@@ -808,7 +808,7 @@ find_enumeration(struct protocol *protocol, + struct interface *i; + struct enumeration *e; + char *enum_name; +- uint idx = 0, j; ++ uint32_t idx = 0, j; + + for (j = 0; j + 1 < strlen(enum_attribute); j++) { + if (enum_attribute[j] == '.') { +-- +2.1.4 + diff --git a/meta-rcar-gen3/recipes-graphics/wayland/wayland_1.11.0.bb b/meta-rcar-gen3/recipes-graphics/wayland/wayland_1.11.0.bb new file mode 100644 index 0000000..3413406 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/wayland/wayland_1.11.0.bb @@ -0,0 +1,43 @@ +SUMMARY = "Wayland, a protocol between a compositor and clients" +DESCRIPTION = "Wayland is a protocol for a compositor to talk to its clients \ +as well as a C library implementation of that protocol. The compositor can be \ +a standalone display server running on Linux kernel modesetting and evdev \ +input devices, an X application, or a wayland client itself. The clients can \ +be traditional applications, X servers (rootless or fullscreen) or other \ +display servers." +HOMEPAGE = "http://wayland.freedesktop.org" +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://COPYING;md5=b31d8f53b6aaf2b4985d7dd7810a70d1 \ + file://src/wayland-server.c;endline=24;md5=b8e046164a766bb1ede8ba38e9dcd7ce" + +SRC_URI = "https://wayland.freedesktop.org/releases/${BPN}-${PV}.tar.xz \ + file://0001-scanner-Use-unit32_t-instead-of-uint.patch \ + " +SRC_URI[md5sum] = "fccf680be066e234729d5b69e0bd0fa9" +SRC_URI[sha256sum] = "9540925f7928becfdf5e3b84c70757f6589bf1ceef09bea78784d8e4772c0db0" + +EXTRA_OECONF_class-native = "--disable-documentation --disable-libraries" + +inherit autotools pkgconfig + +BBCLASSEXTEND = "native nativesdk" + +DEPENDS = "expat libxml2 libffi wayland-native" + +EXTRA_OECONF = "--disable-documentation --with-host-scanner" + +# Wayland installs a M4 macro for other projects to use, which uses the target +# pkg-config to find files. Replace pkg-config with pkg-config-native. +do_install_append_class-native() { + sed -e 's,PKG_CHECK_MODULES(.*),,g' \ + -e 's,$PKG_CONFIG,pkg-config-native,g' \ + -i ${D}/${datadir}/aclocal/wayland-scanner.m4 +} + +sysroot_stage_all_append_class-target () { + rm ${SYSROOT_DESTDIR}/${datadir}/aclocal/wayland-scanner.m4 + cp ${STAGING_DATADIR_NATIVE}/aclocal/wayland-scanner.m4 ${SYSROOT_DESTDIR}/${datadir}/aclocal/ +} + +FILES_${PN} = "${libdir}/*${SOLIBS}" +FILES_${PN}-dev += "${bindir} ${datadir}/wayland" diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston-init.bbappend b/meta-rcar-gen3/recipes-graphics/wayland/weston-init.bbappend new file mode 100644 index 0000000..07dab05 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/wayland/weston-init.bbappend @@ -0,0 +1,30 @@ +require include/gles-control.inc +require include/multimedia-control.inc + +FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:" +SRC_URI = " \ + file://init \ + file://weston.service \ + file://weston-start \ +" + +do_install_append() { + # Install weston-start script + install -Dm755 ${WORKDIR}/weston-start ${D}${bindir}/weston-start + sed -i 's,@DATADIR@,${datadir},g' ${D}${bindir}/weston-start + sed -i 's,@LOCALSTATEDIR@,${localstatedir},g' ${D}${bindir}/weston-start + + if [ "X${USE_GLES}" = "X1" ]; then + sed -e "/RequiresMountsFor=\/run/a Wants=rc.pvr.service" \ + -e "/RequiresMountsFor=\/run/a After=rc.pvr.service" \ + -e "s/\$OPTARGS/--idle-time=0 \$OPTARGS/" \ + -i ${D}/${systemd_system_unitdir}/weston.service + fi + + if [ "X${USE_MULTIMEDIA}" = "X1" ]; then + if [ "X${USE_V4L2_RENDERER}" = "X1" ]; then + sed -e "s/\$OPTARGS/--use-v4l2 \$OPTARGS/" \ + -i ${D}/${systemd_system_unitdir}/weston.service + fi + fi +} diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston-init/init b/meta-rcar-gen3/recipes-graphics/wayland/weston-init/init new file mode 100644 index 0000000..d3e87c6 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/wayland/weston-init/init @@ -0,0 +1,53 @@ +#!/bin/sh +# +### BEGIN INIT INFO +# Provides: weston +# Required-Start: $local_fs $remote_fs +# Required-Stop: $local_fs $remote_fs +# Default-Start: 2 3 4 5 +# Default-Stop: 0 1 6 +### END INIT INFO + +if test -e /etc/default/weston ; then + . /etc/default/weston +fi + +killproc() { + pid=`/bin/pidof $1` + [ "$pid" != "" ] && kill $pid +} + +read CMDLINE < /proc/cmdline +for x in $CMDLINE; do + case $x in + weston=false) + echo "Weston disabled" + exit 0; + ;; + esac +done + +case "$1" in + start) + . /etc/profile + + weston-start -- $OPTARGS + ;; + + stop) + echo "Stopping Weston" + killproc weston + ;; + + restart) + $0 stop + sleep 1 + $0 start + ;; + + *) + echo "usage: $0 { start | stop | restart }" + ;; +esac + +exit 0 diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston-init/weston-start b/meta-rcar-gen3/recipes-graphics/wayland/weston-init/weston-start new file mode 100755 index 0000000..4657513 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/wayland/weston-init/weston-start @@ -0,0 +1,74 @@ +#!/bin/sh +# Copyright (C) 2016 O.S. Systems Software LTDA. +# Copyright (C) 2016 Freescale Semiconductor + +export PATH="/sbin:/usr/sbin:/bin:/usr/bin" + +usage() { + cat < -- +EOF +} + +## Module support +modules_dir=@DATADIR@/weston-start + +# Add weston extra argument +add_weston_argument() { + weston_args="$weston_args $1" +} + +# Add openvt extra argument +add_openvt_argument() { + openvt_args="$openvt_args $1" +} + +if test $# -lt 2; then + usage + exit 1 +fi + +if [ -n "$WAYLAND_DISPLAY" ]; then + echo "ERROR: A Wayland compositor is already running, nested Weston instance is not supported yet." + exit 1 +fi +if [ -n "$DISPLAY" ]; then + launcher="weston" +else + launcher="weston-launch -u root --" +fi + +openvt_args="-s" +while [ -n "$1" ]; do + if [ "$1" = "--" ]; then + shift + break + fi + openvt_args="$openvt_args $1" + shift +done + +weston_args=$* + +# Load and run modules +if [ -d "$modules_dir" ]; then + for m in "$modules_dir"/*; do + # Skip backup files + if [ "`echo $m | sed -e 's/\~$//'`" != "$m" ]; then + continue + fi + + # process module + . $m + done +fi + +if test -z "$XDG_RUNTIME_DIR"; then + export XDG_RUNTIME_DIR=/run/user/`id -u` + if ! test -d "$XDG_RUNTIME_DIR"; then + mkdir --parents $XDG_RUNTIME_DIR + chmod 0700 $XDG_RUNTIME_DIR + fi +fi + +exec openvt $openvt_args -- $launcher $weston_args --log=@LOCALSTATEDIR@/log/weston.log diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston-init/weston.service b/meta-rcar-gen3/recipes-graphics/wayland/weston-init/weston.service new file mode 100644 index 0000000..295ffd7 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/wayland/weston-init/weston.service @@ -0,0 +1,11 @@ +[Unit] +Description=Weston Wayland compositor +After=dbus.service rc.pvr.service + +[Service] +ExecStart=/usr/bin/weston-launch -u root -- $OPTARGS +ExecStop=/usr/bin/killall -s KILL weston +Type=simple + +[Install] +WantedBy=multi-user.target diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston.inc b/meta-rcar-gen3/recipes-graphics/wayland/weston.inc new file mode 100644 index 0000000..68fd83e --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/wayland/weston.inc @@ -0,0 +1,36 @@ +require include/gles-control.inc +require include/multimedia-control.inc + +PACKAGECONFIG_remove_virtclass-multilib-lib32 = "launch" +DEPENDS_append = " \ + ${@base_conditional('USE_GLES', '1', ' libgbm', '', d)}" + +RDEPENDS_${PN}_append = " \ + ${@base_conditional('USE_GLES', '1', ' libgbm', '', d)} \ + ${@base_conditional('USE_MULTIMEDIA', '1', ' media-ctl', '', d)} \ +" +RDEPENDS_${PN}-examples_append = " \ + ${@base_conditional('USE_GLES', '1', ' libgbm', '', d)}" + +EXTRA_OECONF_append = " \ + ${@base_conditional('USE_GLES', '1', '', \ + ' WESTON_NATIVE_BACKEND="fbdev-backend.so"', d)}" + +PACKAGES_prepend = "${PN}-bin " + +FILES_${PN}-bin = " \ + ${bindir}/weston \ + ${bindir}/weston-terminal \ + ${bindir}/weston-info \ + ${bindir}/weston-launch \ + ${bindir}/wcap-decode \ +" + +FILES_${PN} = " \ + ${libdir}/weston \ + ${datadir} \ + ${libexecdir} \ +" + +USERADD_PACKAGES = "${PN}-bin" +GROUPADD_PARAM_${PN}-bin = "--system weston-launch" diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston/0001-configure.ac-Fix-wayland-protocols-path.patch b/meta-rcar-gen3/recipes-graphics/wayland/weston/0001-configure.ac-Fix-wayland-protocols-path.patch new file mode 100644 index 0000000..00118d7 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/wayland/weston/0001-configure.ac-Fix-wayland-protocols-path.patch @@ -0,0 +1,34 @@ +From 1cfc1434a5d385a74de593ec7601674dba39e2fe Mon Sep 17 00:00:00 2001 +From: Jussi Kukkonen +Date: Wed, 11 May 2016 16:16:30 +0300 +Subject: [PATCH] configure.ac: Fix wayland-protocols path + +The wayland-protocols directory is used during build: Fix the path +to point to sysroot specified in recipe. + +Normally PKG_CONFIG_SYSROOT_DIR could be used in configure.ac but that +breaks multilib weston as it would point to multilib sysroot when the +(allarch) wayland-protocols is actually in the machine sysroot. + +Signed-off-by: Jussi Kukkonen +Upstream-Status: Inappropriate [embedded specific] +--- + configure.ac | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/configure.ac b/configure.ac +index bc7c329..15a05d3 100644 +--- a/configure.ac ++++ b/configure.ac +@@ -187,7 +187,7 @@ PKG_CHECK_MODULES(LIBINPUT_BACKEND, [libinput >= 0.8.0]) + PKG_CHECK_MODULES(COMPOSITOR, [$COMPOSITOR_MODULES]) + + PKG_CHECK_MODULES(WAYLAND_PROTOCOLS, [wayland-protocols >= 1.2], +- [ac_wayland_protocols_pkgdatadir=`$PKG_CONFIG --variable=pkgdatadir wayland-protocols`]) ++ [ac_wayland_protocols_pkgdatadir=${WAYLAND_PROTOCOLS_SYSROOT_DIR}`$PKG_CONFIG --variable=pkgdatadir wayland-protocols`]) + AC_SUBST(WAYLAND_PROTOCOLS_DATADIR, $ac_wayland_protocols_pkgdatadir) + + AC_ARG_ENABLE(wayland-compositor, [ --enable-wayland-compositor],, +-- +2.1.4 + diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston/0001-make-error-portable.patch b/meta-rcar-gen3/recipes-graphics/wayland/weston/0001-make-error-portable.patch new file mode 100644 index 0000000..148848d --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/wayland/weston/0001-make-error-portable.patch @@ -0,0 +1,80 @@ +From c22e90365d89346258394833cbcad03ff32b2e27 Mon Sep 17 00:00:00 2001 +From: Khem Raj +Date: Fri, 29 May 2015 20:56:00 -0700 +Subject: [PATCH weston] make error() portable + +error() is not posix but gnu extension so may not be available on all +kind of systemsi e.g. musl. + +Signed-off-by: Khem Raj +--- +Upstream-Status: Submitted + + configure.ac | 2 ++ + src/weston-error.h | 20 ++++++++++++++++++++ + src/weston-launch.c | 2 +- + 3 files changed, 23 insertions(+), 1 deletion(-) + create mode 100644 src/weston-error.h + +diff --git a/configure.ac b/configure.ac +index 263fc22..f52cd62 100644 +--- a/configure.ac ++++ b/configure.ac +@@ -57,6 +57,8 @@ AC_CHECK_DECL(CLOCK_MONOTONIC,[], + [[#include ]]) + AC_CHECK_HEADERS([execinfo.h]) + ++AC_CHECK_HEADERS([error.h]) ++ + AC_CHECK_FUNCS([mkostemp strchrnul initgroups posix_fallocate]) + + COMPOSITOR_MODULES="wayland-server >= 1.7.93 pixman-1 >= 0.25.2" +diff --git a/src/weston-error.h b/src/weston-error.h +new file mode 100644 +index 0000000..2089d02 +--- /dev/null ++++ b/src/weston-error.h +@@ -0,0 +1,20 @@ ++#ifndef _WESTON_ERROR_H ++#define _WESTON_ERROR_H ++ ++#if defined(HAVE_ERROR_H) ++#include ++#else ++#include ++#include ++#define _weston_error(S, E, F, ...) do { \ ++ if (E) \ ++ err(S, F ": %s", ##__VA_ARGS__, strerror(E)); \ ++ else \ ++ err(S, F, ##__VA_ARGS__); \ ++} while(0) ++ ++#define error _weston_error ++#endif ++ ++#endif ++ +diff --git a/src/weston-launch.c b/src/weston-launch.c +index 10c66de..3e6d30a 100644 +--- a/src/weston-launch.c ++++ b/src/weston-launch.c +@@ -30,7 +30,6 @@ + #include + #include + +-#include + #include + + #include +@@ -56,6 +55,7 @@ + #endif + + #include "weston-launch.h" ++#include "weston-error.h" + + #define DRM_MAJOR 226 + +-- +2.1.4 + diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston/0001-shared-include-stdint.h-for-int32_t.patch b/meta-rcar-gen3/recipes-graphics/wayland/weston/0001-shared-include-stdint.h-for-int32_t.patch new file mode 100644 index 0000000..91ef727 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/wayland/weston/0001-shared-include-stdint.h-for-int32_t.patch @@ -0,0 +1,28 @@ +From ba02b8abe4e2afac2bfbf2559972d5059d75a041 Mon Sep 17 00:00:00 2001 +From: Jussi Kukkonen +Date: Sat, 16 Jul 2016 22:50:19 +0300 +Subject: [PATCH weston] shared: include stdint.h for int32_t + +This fixes build on musl. + +Signed-off-by: Jussi Kukkonen +Upstream-Status: Submitted +--- + shared/xalloc.h | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/shared/xalloc.h b/shared/xalloc.h +index 85fccb4..484de2d 100644 +--- a/shared/xalloc.h ++++ b/shared/xalloc.h +@@ -30,6 +30,7 @@ + extern "C" { + #endif + ++#include + #include + #include + +-- +2.1.4 + diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston/0001-weston-launch-Provide-a-default-version-that-doesn-t.patch b/meta-rcar-gen3/recipes-graphics/wayland/weston/0001-weston-launch-Provide-a-default-version-that-doesn-t.patch new file mode 100644 index 0000000..5542036 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/wayland/weston/0001-weston-launch-Provide-a-default-version-that-doesn-t.patch @@ -0,0 +1,173 @@ +From d02226b3d5872b184c1d50c7f4706ac9467ffb81 Mon Sep 17 00:00:00 2001 +From: Tom Hochstein +Date: Fri, 15 Jul 2016 11:00:15 +0300 +Subject: [PATCH] weston-launch: Provide a default version that doesn't require + PAM + +weston-launch requires PAM for starting weston as a non-root user. + +Since starting weston as root is a valid use case by itself, if +PAM is not available, provide a default version of weston-launch +without non-root-user support. + +Upstream-Status: Pending + +Signed-off-by: Tom Hochstein +--- + configure.ac | 9 +++++++-- + src/weston-launch.c | 20 ++++++++++++++++++++ + 2 files changed, 27 insertions(+), 2 deletions(-) + +diff --git a/configure.ac b/configure.ac +index 32fdde7..240966f 100644 +--- a/configure.ac ++++ b/configure.ac +@@ -416,13 +416,17 @@ AC_ARG_ENABLE(resize-optimization, + AS_IF([test "x$enable_resize_optimization" = "xyes"], + [AC_DEFINE([USE_RESIZE_POOL], [1], [Use resize memory pool as a performance optimization])]) + ++AC_ARG_WITH(pam, ++ AS_HELP_STRING([--with-pam], [Use PAM]), ++ [use_pam=$withval], [use_pam=yes]) + AC_ARG_ENABLE(weston-launch, [ --enable-weston-launch],, enable_weston_launch=yes) + AM_CONDITIONAL(BUILD_WESTON_LAUNCH, test x$enable_weston_launch == xyes) +-if test x$enable_weston_launch == xyes; then ++if test x$enable_weston_launch = xyes -a x$use_pam = xyes; then + WESTON_SEARCH_LIBS([PAM], [pam], [pam_open_session], [have_pam=yes], [have_pam=no]) + if test x$have_pam == xno; then +- AC_ERROR([weston-launch requires pam]) ++ AC_ERROR([PAM support is explicitly requested, but libpam couldn't be found]) + fi ++ AC_DEFINE([HAVE_PAM], [1], [Define if PAM is available]) + fi + + AM_CONDITIONAL(HAVE_PANGO, test "x$have_pango" = "xyes") +@@ -673,6 +677,7 @@ AC_MSG_RESULT([ + Enable developer documentation ${enable_devdocs} + + weston-launch utility ${enable_weston_launch} ++ PAM support ${use_pam} + systemd-login support ${have_systemd_login} + systemd notify support ${enable_systemd_notify} + +diff --git a/src/weston-launch.c b/src/weston-launch.c +index b8b2ba0..a865061 100644 +--- a/src/weston-launch.c ++++ b/src/weston-launch.c +@@ -51,7 +51,9 @@ + + #include + #include ++#ifdef HAVE_PAM + #include ++#endif + + #ifdef HAVE_SYSTEMD_LOGIN + #include +@@ -93,8 +95,10 @@ drmSetMaster(int drm_fd) + #endif + + struct weston_launch { ++#ifdef HAVE_PAM + struct pam_conv pc; + pam_handle_t *ph; ++#endif + int tty; + int ttynr; + int sock[2]; +@@ -181,6 +185,7 @@ weston_launch_allowed(struct weston_launch *wl) + return false; + } + ++#ifdef HAVE_PAM + static int + pam_conversation_fn(int msg_count, + const struct pam_message **messages, +@@ -221,6 +226,7 @@ setup_pam(struct weston_launch *wl) + + return 0; + } ++#endif + + static int + setup_launcher_socket(struct weston_launch *wl) +@@ -414,6 +420,7 @@ quit(struct weston_launch *wl, int status) + close(wl->signalfd); + close(wl->sock[0]); + ++#ifdef HAVE_PAM + if (wl->new_user) { + err = pam_close_session(wl->ph, 0); + if (err) +@@ -421,6 +428,7 @@ quit(struct weston_launch *wl, int status) + err, pam_strerror(wl->ph, err)); + pam_end(wl->ph, err); + } ++#endif + + if (ioctl(wl->tty, KDSKBMUTE, 0) && + ioctl(wl->tty, KDSKBMODE, wl->kb_mode)) +@@ -600,6 +608,7 @@ setup_session(struct weston_launch *wl) + setenv("HOME", wl->pw->pw_dir, 1); + setenv("SHELL", wl->pw->pw_shell, 1); + ++#ifdef HAVE_PAM + env = pam_getenvlist(wl->ph); + if (env) { + for (i = 0; env[i]; ++i) { +@@ -608,6 +617,7 @@ setup_session(struct weston_launch *wl) + } + free(env); + } ++#endif + } + + static void +@@ -665,7 +675,9 @@ static void + help(const char *name) + { + fprintf(stderr, "Usage: %s [args...] [-- [weston args..]]\n", name); ++#ifdef HAVE_PAM + fprintf(stderr, " -u, --user Start session as specified username\n"); ++#endif + fprintf(stderr, " -t, --tty Start session on alternative tty\n"); + fprintf(stderr, " -v, --verbose Be verbose\n"); + fprintf(stderr, " -h, --help Display this help message\n"); +@@ -678,7 +690,9 @@ main(int argc, char *argv[]) + int i, c; + char *tty = NULL; + struct option opts[] = { ++#ifdef HAVE_PAM + { "user", required_argument, NULL, 'u' }, ++#endif + { "tty", required_argument, NULL, 't' }, + { "verbose", no_argument, NULL, 'v' }, + { "help", no_argument, NULL, 'h' }, +@@ -690,9 +704,13 @@ main(int argc, char *argv[]) + while ((c = getopt_long(argc, argv, "u:t::vh", opts, &i)) != -1) { + switch (c) { + case 'u': ++#ifdef HAVE_PAM + wl.new_user = optarg; + if (getuid() != 0) + error(1, 0, "Permission denied. -u allowed for root only"); ++#else ++ error(1, 0, "-u is unsupported in this weston-launch build"); ++#endif + break; + case 't': + tty = optarg; +@@ -730,8 +748,10 @@ main(int argc, char *argv[]) + if (setup_tty(&wl, tty) < 0) + exit(EXIT_FAILURE); + ++#ifdef HAVE_PAM + if (wl.new_user && setup_pam(&wl) < 0) + exit(EXIT_FAILURE); ++#endif + + if (setup_launcher_socket(&wl) < 0) + exit(EXIT_FAILURE); +-- +2.1.4 + diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston/make-weston-launch-exit-for-unrecognized-option.patch b/meta-rcar-gen3/recipes-graphics/wayland/weston/make-weston-launch-exit-for-unrecognized-option.patch new file mode 100644 index 0000000..0c408a4 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/wayland/weston/make-weston-launch-exit-for-unrecognized-option.patch @@ -0,0 +1,33 @@ +From e8b615250f700f7854b423aaaf0a0aeea92c05a9 Mon Sep 17 00:00:00 2001 +From: Tom Hochstein +Date: Sat, 7 May 2016 08:51:58 -0300 +Subject: [PATCH] weston-launch: Handle invalid command line options +Organization: O.S. Systems Software LTDA. + +Exit the program if an unrecognized command line option is found. + +Upstream-Status: Submitted + +Signed-off-by: Tom Hochstein +Signed-off-by: Otavio Salvador +--- + + src/weston-launch.c | 2 ++ + 1 file changed, 2 insertions(+) + +diff --git a/src/weston-launch.c b/src/weston-launch.c +index b8dfb17..9987d8e 100644 +--- a/src/weston-launch.c ++++ b/src/weston-launch.c +@@ -703,6 +703,8 @@ main(int argc, char *argv[]) + case 'h': + help("weston-launch"); + exit(EXIT_FAILURE); ++ default: ++ exit(EXIT_FAILURE); + } + } + +-- +2.8.2 + diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston/weston.desktop b/meta-rcar-gen3/recipes-graphics/wayland/weston/weston.desktop new file mode 100644 index 0000000..1086ae8 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/wayland/weston/weston.desktop @@ -0,0 +1,9 @@ +[Desktop Entry] +Encoding=UTF-8 +Type=Application +Name=Weston +Comment=Wayland Compostitor +Exec=weston +Icon=weston +Terminal=false +Categories=Utility; diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston/weston.ini b/meta-rcar-gen3/recipes-graphics/wayland/weston/weston.ini new file mode 100644 index 0000000..f31c290 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/wayland/weston/weston.ini @@ -0,0 +1,2 @@ +[core] +repaint-window=34 diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston/weston.png b/meta-rcar-gen3/recipes-graphics/wayland/weston/weston.png new file mode 100644 index 0000000..ea8b7e0 Binary files /dev/null and b/meta-rcar-gen3/recipes-graphics/wayland/weston/weston.png differ diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston/weston_v4l2.ini b/meta-rcar-gen3/recipes-graphics/wayland/weston/weston_v4l2.ini new file mode 100644 index 0000000..8e2e70f --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/wayland/weston/weston_v4l2.ini @@ -0,0 +1,6 @@ +[core] +repaint-window=34 + +[v4l2-renderer] +device=/dev/media1 +device-module=vsp2 diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston/xwayland.weston-start b/meta-rcar-gen3/recipes-graphics/wayland/weston/xwayland.weston-start new file mode 100644 index 0000000..b483c97 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/wayland/weston/xwayland.weston-start @@ -0,0 +1,7 @@ +#!/bin/sh + +if type Xwayland >/dev/null 2>/dev/null; then + mkdir -p /tmp/.X11-unix + + add_weston_argument "--modules=xwayland.so" +fi diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston_1.11.0.bb b/meta-rcar-gen3/recipes-graphics/wayland/weston_1.11.0.bb new file mode 100644 index 0000000..3ad309d --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/wayland/weston_1.11.0.bb @@ -0,0 +1,117 @@ +SUMMARY = "Weston, a Wayland compositor" +DESCRIPTION = "Weston is the reference implementation of a Wayland compositor" +HOMEPAGE = "http://wayland.freedesktop.org" +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://COPYING;md5=d79ee9e66bb0f95d3386a7acae780b70 \ + file://src/compositor.c;endline=23;md5=1d535fed266cf39f6d8c0647f52ac331" + +SRC_URI = "https://wayland.freedesktop.org/releases/${BPN}-${PV}.tar.xz \ + file://weston.png \ + file://weston.desktop \ + file://0001-make-error-portable.patch \ + file://0001-configure.ac-Fix-wayland-protocols-path.patch \ + file://0001-shared-include-stdint.h-for-int32_t.patch \ + file://xwayland.weston-start \ + file://make-weston-launch-exit-for-unrecognized-option.patch \ + file://0001-weston-launch-Provide-a-default-version-that-doesn-t.patch \ +" +SRC_URI[md5sum] = "bc6f90a2039163804aecfa663b69c4c2" +SRC_URI[sha256sum] = "05e086e9f186a06843b9f7a5e1abf19347b1a6e4be26d7e74927abc17b6b7125" + +inherit autotools pkgconfig useradd distro_features_check +# depends on virtual/egl +REQUIRED_DISTRO_FEATURES = "opengl" + +DEPENDS = "libxkbcommon gdk-pixbuf pixman cairo glib-2.0 jpeg" +DEPENDS += "wayland wayland-protocols libinput virtual/egl pango wayland-native" + +EXTRA_OECONF = "--enable-setuid-install \ + --disable-rpi-compositor \ + --disable-rdp-compositor \ + WAYLAND_PROTOCOLS_SYSROOT_DIR=${STAGING_DIR}/${MACHINE} \ + " +EXTRA_OECONF[vardepsexclude] = "MACHINE" + +EXTRA_OECONF_append_qemux86 = "\ + WESTON_NATIVE_BACKEND=fbdev-backend.so \ + " +EXTRA_OECONF_append_qemux86-64 = "\ + WESTON_NATIVE_BACKEND=fbdev-backend.so \ + " +PACKAGECONFIG ??= "${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'kms fbdev wayland egl', '', d)} \ + ${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'x11', '', d)} \ + ${@bb.utils.contains('DISTRO_FEATURES', 'x11 wayland', 'xwayland', '', d)} \ + ${@bb.utils.contains('DISTRO_FEATURES', 'pam', 'pam', '', d)} \ + ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'systemd', '', d)} \ + clients launch" +# +# Compositor choices +# +# Weston on KMS +PACKAGECONFIG[kms] = "--enable-drm-compositor,--disable-drm-compositor,drm udev virtual/mesa mtdev" +# Weston on Wayland (nested Weston) +PACKAGECONFIG[wayland] = "--enable-wayland-compositor,--disable-wayland-compositor,virtual/mesa" +# Weston on X11 +PACKAGECONFIG[x11] = "--enable-x11-compositor,--disable-x11-compositor,virtual/libx11 libxcb libxcb libxcursor cairo" +# Headless Weston +PACKAGECONFIG[headless] = "--enable-headless-compositor,--disable-headless-compositor" +# Weston on framebuffer +PACKAGECONFIG[fbdev] = "--enable-fbdev-compositor,--disable-fbdev-compositor,udev mtdev" +# weston-launch +PACKAGECONFIG[launch] = "--enable-weston-launch,--disable-weston-launch,drm" +# VA-API desktop recorder +PACKAGECONFIG[vaapi] = "--enable-vaapi-recorder,--disable-vaapi-recorder,libva" +# Weston with EGL support +PACKAGECONFIG[egl] = "--enable-egl --enable-simple-egl-clients,--disable-egl --disable-simple-egl-clients,virtual/egl" +# Weston with cairo glesv2 support +PACKAGECONFIG[cairo-glesv2] = "--with-cairo-glesv2,--with-cairo=image,cairo" +# Weston with lcms support +PACKAGECONFIG[lcms] = "--enable-lcms,--disable-lcms,lcms" +# Weston with webp support +PACKAGECONFIG[webp] = "--with-webp,--without-webp,libwebp" +# Weston with unwinding support +PACKAGECONFIG[libunwind] = "--enable-libunwind,--disable-libunwind,libunwind" +# Weston with systemd-login support +PACKAGECONFIG[systemd] = "--enable-systemd-login,--disable-systemd-login,systemd dbus" +# Weston with Xwayland support (requires X11 and Wayland) +PACKAGECONFIG[xwayland] = "--enable-xwayland,--disable-xwayland" +# colord CMS support +PACKAGECONFIG[colord] = "--enable-colord,--disable-colord,colord" +# Clients support +PACKAGECONFIG[clients] = "--enable-clients --enable-simple-clients --enable-demo-clients-install,--disable-clients --disable-simple-clients" +# Weston with PAM support +PACKAGECONFIG[pam] = "--with-pam,--without-pam,libpam" + +do_install_append() { + # Weston doesn't need the .la files to load modules, so wipe them + rm -f ${D}/${libdir}/weston/*.la + + # If X11, ship a desktop file to launch it + if [ "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'x11', '', d)}" = "x11" ]; then + install -d ${D}${datadir}/applications + install ${WORKDIR}/weston.desktop ${D}${datadir}/applications + + install -d ${D}${datadir}/icons/hicolor/48x48/apps + install ${WORKDIR}/weston.png ${D}${datadir}/icons/hicolor/48x48/apps + fi + + if [ "${@bb.utils.contains('PACKAGECONFIG', 'xwayland', 'yes', 'no', d)}" = "yes" ]; then + install -Dm 644 ${WORKDIR}/xwayland.weston-start ${D}${datadir}/weston-start/xwayland + fi +} + +PACKAGE_BEFORE_PN += "${@bb.utils.contains('PACKAGECONFIG', 'xwayland', '${PN}-xwayland', '', d)}" +PACKAGES += "${PN}-examples" + +FILES_${PN} = "${bindir}/weston ${bindir}/weston-terminal ${bindir}/weston-info ${bindir}/weston-launch ${bindir}/wcap-decode ${libexecdir} ${libdir}/${BPN}/*.so ${datadir}" +FILES_${PN}-examples = "${bindir}/*" + +FILES_${PN}-xwayland = "${libdir}/${BPN}/xwayland.so" +RDEPENDS_${PN}-xwayland += "xserver-xorg-xwayland" + +RDEPENDS_${PN} += "xkeyboard-config" +RRECOMMENDS_${PN} = "liberation-fonts" +RRECOMMENDS_${PN}-dev += "wayland-protocols" + +USERADD_PACKAGES = "${PN}" +GROUPADD_PARAM_${PN} = "--system weston-launch" diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston_1.11.0.bbappend b/meta-rcar-gen3/recipes-graphics/wayland/weston_1.11.0.bbappend new file mode 100644 index 0000000..48e49dc --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/wayland/weston_1.11.0.bbappend @@ -0,0 +1,44 @@ +require weston.inc + +FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:" + +BRANCH = "rcar-gen3/1.11.0/gl-fallback" + +SRCREV = "ef4fdad7fc6549493c244b6e657ec00565408497" + +SRC_URI = " \ + git://github.com/renesas-rcar/weston.git;branch=${BRANCH} \ + file://weston.png \ + file://weston.desktop \ + file://0001-make-error-portable.patch \ + file://0001-configure.ac-Fix-wayland-protocols-path.patch \ + file://0001-shared-include-stdint.h-for-int32_t.patch \ + file://xwayland.weston-start \ + file://make-weston-launch-exit-for-unrecognized-option.patch \ + file://0001-weston-launch-Provide-a-default-version-that-doesn-t.patch \ + file://weston.ini \ + file://weston_v4l2.ini \ +" + +S = "${WORKDIR}/git" + +PACKAGECONFIG_append = " \ + ${@base_conditional('USE_MULTIMEDIA', '1', ' v4l2', '', d)} \ +" +PACKAGECONFIG[v4l2] = " --enable-v4l2, --disable-v4l2,,kernel-module-vsp2driver" + +do_install_append() { + if [ "X${USE_MULTIMEDIA}" = "X1" ]; then + # install weston.ini as sample settings of v4l2-renderer + install -d ${D}/${sysconfdir}/xdg/weston + install -m 644 ${WORKDIR}/weston_v4l2.ini ${D}/${sysconfdir}/xdg/weston/weston.ini + else + # install weston.ini as sample settings of gl-renderer + install -d ${D}/${sysconfdir}/xdg/weston + install -m 644 ${WORKDIR}/weston.ini ${D}/${sysconfdir}/xdg/weston/ + fi +} + +FILES_${PN}_append = " \ + ${sysconfdir}/xdg/weston/weston.ini \ +" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-adsp/kernel-module-xtensa-hifi.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-adsp/kernel-module-xtensa-hifi.bb new file mode 100644 index 0000000..6d659ed --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-adsp/kernel-module-xtensa-hifi.bb @@ -0,0 +1,32 @@ +DESCRIPTION = "ADSP Driver for Linux" +LICENSE = "GPLv2 & MIT" + +LIC_FILES_CHKSUM = " \ + file://COPYING;md5=55979d94ccbb973fdea772250e0c54d6 \ + file://MIT-COPYING;md5=f932f6ad0feea4f97b6e8316e172070e \ +" + +require include/adsp-control.inc +inherit module + +FILESEXTRAPATHS_prepend := "${THISDIR}/xtensa-hifi:" + +SRC_URI = "${@base_conditional('USE_ADSP', '1', 'file://RCG3AHPDL4001ZDO.tar.gz', '', d)}" + +S = "${WORKDIR}/RCG3AHPDL4001ZDO" + +# Define the extra config for using module.bbclass to build ADSP driver +EXTRA_OEMAKE_append = " KDIR=${STAGING_KERNEL_DIR}" + +do_install_append(){ + # Create install directories + install -d ${D}/${includedir} + install -d ${D}/${includedir}/sys/xt-shmem + + # Install shared header files + install -m 644 ${S}/include/*.h ${D}/${includedir}/ + install -m 644 ${S}/include/sys/xt-shmem/*.h ${D}/${includedir}/sys/xt-shmem/ +} + +# The ADSP driver need adsp firmware for running +RDEPENDS_${PN}_append = " adsp-fw-module" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-mch.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-mch.bb new file mode 100644 index 0000000..ce84d79 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-mch.bb @@ -0,0 +1,20 @@ +DESCRIPTION = "AVB MCH Driver for Linux for the R-Car Gen3" + +require include/avb-control.inc + +LICENSE = "GPLv2 & MIT" +LIC_FILES_CHKSUM = " \ + file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://MIT-COPYING;md5=495d47d57d37b06c3ad8c08a85f058c7 \ +" + +inherit module distro_features_check + +DEPENDS = "linux-renesas" + +REQUIRED_DISTRO_FEATURES = "avb" + +SRC_URI = "git://github.com/renesas-rcar/avb-mch.git;branch=rcar-gen3" +SRCREV = "eafc080dce40c171f060e39f4887354e57ba7c1a" + +S = "${WORKDIR}/git" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-mse.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-mse.bb new file mode 100644 index 0000000..366c60c --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-mse.bb @@ -0,0 +1,38 @@ +DESCRIPTION = "AVB MSE Driver for Linux for the R-Car Gen3" + +require include/avb-control.inc +require include/rcar-gen3-modules-common.inc + +LICENSE = "GPLv2 & MIT" +LIC_FILES_CHKSUM = " \ + file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://MIT-COPYING;md5=192063521ce782a445a3c9f99a8ad560 \ +" + +inherit module distro_features_check + +DEPENDS = "linux-renesas kernel-module-avb-streaming" + +REQUIRED_DISTRO_FEATURES = "avb" + +SRC_URI = "git://github.com/renesas-rcar/avb-mse.git;branch=rcar-gen3" +SRCREV = "50f3b60c6323788280f2b1e366e994d195a2ef1d" + +S = "${WORKDIR}/git" + +includedir = "/usr/local/include" + +do_install_append() { + # Create destination directories + install -d ${KERNELSRC}/include + install -d ${D}/${includedir} + + # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR). + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/ravb_mse.h ${KERNELSRC}/include + install -m 644 ${S}/ravb_mse_kernel.h ${KERNELSRC}/include + + # Install shared header files to ${includedir} + install -m 644 ${S}/ravb_mse.h ${D}/${includedir} + install -m 644 ${S}/ravb_mse_kernel.h ${D}/${includedir} +} diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-streaming.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-streaming.bb new file mode 100644 index 0000000..1534f41 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-streaming.bb @@ -0,0 +1,36 @@ +DESCRIPTION = "AVB Streaming Driver for Linux for the R-Car Gen3" + +require include/rcar-gen3-modules-common.inc +require include/avb-control.inc + +LICENSE = "GPLv2 & MIT" +LIC_FILES_CHKSUM = " \ + file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://MIT-COPYING;md5=704e38c3a28fde2e7fa153d3e0e787a4 \ +" + +inherit module distro_features_check + +DEPENDS = "linux-renesas" + +REQUIRED_DISTRO_FEATURES = "avb" + +SRC_URI = "git://github.com/renesas-rcar/avb-streaming.git;branch=rcar-gen3" +SRCREV = "38c0dd5db9a55e9f4e2ff728a403e0ec9dbfc148" + +S = "${WORKDIR}/git" + +includedir="/usr/local/include" + +do_install_append () { + # Create destination directories + install -d ${KERNELSRC}/include + install -d ${D}/${includedir} + + # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR). + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/ravb_eavb.h ${KERNELSRC}/include + + # Install shared header files to ${includedir} + install -m 644 ${S}/ravb_eavb.h ${D}/${includedir} +} diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-scu-src.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-scu-src.bb new file mode 100644 index 0000000..e96799f --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-scu-src.bb @@ -0,0 +1,55 @@ +DESCRIPTION = "DTV Driver part of scu_src for Linux for the R-Car Gen3" + +require include/rcar-gen3-modules-common.inc +require include/dtv-dvd-control.inc + +LICENSE = "GPLv2 & MIT" +LIC_FILES_CHKSUM = " \ + file://scu_src_drv/include/GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://scu_src_drv/include/MIT-COPYING;md5=fea016ce2bdf2ec10080f69e9381d378 \ +" + +inherit module distro_features_check + +DEPENDS = "linux-renesas" +PN = "kernel-module-scu-src" +PR = "r0" + +REQUIRED_DISTRO_FEATURES = "dtv" + +SRC_URI = "file://scu_src_drv.tar.gz" + +S = "${WORKDIR}" + +EXTRA_OEMAKE_r8a7795 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_H3" +EXTRA_OEMAKE_r8a7796 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_M3" + +do_compile() { + cd ${S}/scu_src_drv/drv + oe_runmake +} + +do_install () { + # Create destination directories + install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/ + install -d ${KERNELSRC}/include + + # Install kernel module + install -m 644 ${S}/scu_src_drv/drv/scu_src_drv.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/ + + # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR). + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/scu_src_drv/include/*.h ${KERNELSRC}/include + install -m 644 ${S}/scu_src_drv/drv/Module.symvers ${KERNELSRC}/include/scu-drv.symvers +} + +PACKAGES = "\ + ${PN} \ +" + +FILES_${PN} = " \ + /lib/modules/${KERNEL_VERSION}/extra/scu_src_drv.ko \ +" + +RPROVIDES_${PN} += "kernel-module-scu-src kernel-module-scu-src-drv" +INHIBIT_PACKAGE_DEBUG_SPLIT = "1" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-ssp.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-ssp.bb new file mode 100644 index 0000000..e51c3a0 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-ssp.bb @@ -0,0 +1,55 @@ +DESCRIPTION = "DTV Driver part of ssp for Linux for the R-Car Gen3" + +require include/rcar-gen3-modules-common.inc +require include/dtv-dvd-control.inc + +LICENSE = "GPLv2 & MIT" +LIC_FILES_CHKSUM = " \ + file://ssp_drv/include/GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://ssp_drv/include/MIT-COPYING;md5=fea016ce2bdf2ec10080f69e9381d378 \ +" + +inherit module distro_features_check + +DEPENDS = "linux-renesas" +PN = "kernel-module-ssp" +PR = "r0" + +REQUIRED_DISTRO_FEATURES = "dtv" + +SRC_URI = "file://ssp_drv.tar.gz" + +S = "${WORKDIR}" + +EXTRA_OEMAKE_r8a7795 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_H3" +EXTRA_OEMAKE_r8a7796 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_M3" + +do_compile() { + cd ${S}/ssp_drv/drv + oe_runmake +} + +do_install () { + # Create destination directories + install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/ + install -d ${KERNELSRC}/include + + # Install kernel module + install -m 644 ${S}/ssp_drv/drv/ssp_dev.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/ + + # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR). + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/ssp_drv/include/*.h ${KERNELSRC}/include + install -m 644 ${S}/ssp_drv/drv/Module.symvers ${KERNELSRC}/include/ssp_drv.symvers +} + +PACKAGES = "\ + ${PN} \ +" + +FILES_${PN} = " \ + /lib/modules/${KERNEL_VERSION}/extra/ssp_dev.ko \ +" + +RPROVIDES_${PN} += "kernel-module-ssp" +INHIBIT_PACKAGE_DEBUG_SPLIT = "1" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-tddmac.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-tddmac.bb new file mode 100644 index 0000000..b2533fb --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-tddmac.bb @@ -0,0 +1,55 @@ +DESCRIPTION = "DTV Driver part of tddmac for Linux for the R-Car Gen3" + +require include/rcar-gen3-modules-common.inc +require include/dtv-dvd-control.inc + +LICENSE = "GPLv2 & MIT" +LIC_FILES_CHKSUM = " \ + file://tddmac_drv/include/GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://tddmac_drv/include/MIT-COPYING;md5=fea016ce2bdf2ec10080f69e9381d378 \ +" + +inherit module distro_features_check + +DEPENDS = "linux-renesas" +PN = "kernel-module-tddmac" +PR = "r0" + +REQUIRED_DISTRO_FEATURES = "dtv" + +SRC_URI = "file://tddmac_drv.tar.gz" + +S = "${WORKDIR}" + +EXTRA_OEMAKE_r8a7795 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_H3" +EXTRA_OEMAKE_r8a7796 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_M3" + +do_compile() { + cd ${S}/tddmac_drv/drv + oe_runmake +} + +do_install () { + # Create destination directories + install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/ + install -d ${KERNELSRC}/include + + # Install kernel module + install -m 644 ${S}/tddmac_drv/drv/tddmac.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/ + + # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR). + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/tddmac_drv/include/*.h ${KERNELSRC}/include + install -m 644 ${S}/tddmac_drv/drv/Module.symvers ${KERNELSRC}/include/tddmac_drv.symvers +} + +PACKAGES = "\ + ${PN} \ +" + +FILES_${PN} = " \ + /lib/modules/${KERNEL_VERSION}/extra/tddmac.ko \ +" + +RPROVIDES_${PN} += "kernel-module-tddmac" +INHIBIT_PACKAGE_DEBUG_SPLIT = "1" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-tsif.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-tsif.bb new file mode 100644 index 0000000..c0b77f9 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-tsif.bb @@ -0,0 +1,54 @@ +DESCRIPTION = "DTV Driver part of tsif for Linux for the R-Car Gen3" + +require include/rcar-gen3-modules-common.inc +require include/dtv-dvd-control.inc + +LICENSE = "GPLv2 & MIT" +LIC_FILES_CHKSUM = " \ + file://tsif_drv/include/GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://tsif_drv/include/MIT-COPYING;md5=fea016ce2bdf2ec10080f69e9381d378 \ +" + +inherit module distro_features_check + +PN = "kernel-module-tsif" +PR = "r0" + +REQUIRED_DISTRO_FEATURES = "dtv" + +SRC_URI = "file://tsif_drv.tar.gz" + +S = "${WORKDIR}" + +EXTRA_OEMAKE_r8a7795 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_H3" +EXTRA_OEMAKE_r8a7796 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_M3" + +do_compile() { + cd ${S}/tsif_drv/drv + oe_runmake +} + +do_install () { + # Create destination directories + install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/ + install -d ${KERNELSRC}/include + + # Install kernel module + install -m 644 ${S}/tsif_drv/drv/tsif_drv.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/ + + # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR). + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/tsif_drv/include/*.h ${KERNELSRC}/include + install -m 644 ${S}/tsif_drv/drv/Module.symvers ${KERNELSRC}/include/tsif_drv.symvers +} + +PACKAGES = "\ + ${PN} \ +" + +FILES_${PN} = " \ + /lib/modules/${KERNEL_VERSION}/extra/tsif_drv.ko \ +" + +RPROVIDES_${PN} += "kernel-module-tsif kernel-module-tsif-drv" +INHIBIT_PACKAGE_DEBUG_SPLIT = "1" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-gles/kernel-module-gles.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-gles/kernel-module-gles.bb new file mode 100644 index 0000000..bdfd0a8 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-gles/kernel-module-gles.bb @@ -0,0 +1,55 @@ +DESCRIPTION = "Kernel module of PowerVR GPU" +LICENSE = "GPLv2 & MIT" +LIC_FILES_CHKSUM = " \ + file://GPL-COPYING;md5=60422928ba677faaa13d6ab5f5baaa1e \ + file://MIT-COPYING;md5=8c2810fa6bfdc5ae5c15a0c1ade34054 \ +" +inherit module +PN = "kernel-module-gles" +PR = "r0" + +COMPATIBLE_MACHINE = "(r8a7795|r8a7796)" +PACKAGE_ARCH = "${MACHINE_ARCH}" + +SRC_URI_r8a7795 = 'file://GSX_KM_H3.tar.bz2' +SRC_URI_r8a7796 = 'file://GSX_KM_M3.tar.bz2' +S = "${WORKDIR}/rogue_km" + +KBUILD_DIR_r8a7795 = "${S}/build/linux/r8a7795_linux" +KBUILD_DIR_r8a7796 = "${S}/build/linux/r8a7796_linux" +KBUILD_OUTDIR_r8a7795 = "binary_r8a7795_linux_release/target_aarch64/kbuild/" +KBUILD_OUTDIR_r8a7796 = "binary_r8a7796_linux_release/target_aarch64/kbuild/" + +B = "${KBUILD_DIR}" + +EXTRA_OEMAKE = "KERNELDIR=${STAGING_KERNEL_BUILDDIR}" +EXTRA_OEMAKE += "CROSS_COMPILE=${CROSS_COMPILE}" + +module_do_compile() { + unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS + cd ${KBUILD_DIR} + oe_runmake +} + +module_do_install() { + unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS + install -d ${D}/lib/modules/${KERNEL_VERSION} + cd ${KBUILD_DIR} + oe_runmake DISCIMAGE="${D}" install +} + +# Ship the module symbol file to kerenel build dir +SYSROOT_PREPROCESS_FUNCS = "module_sysroot_symbol" + +module_sysroot_symbol() { + install -m 644 ${S}/${KBUILD_OUTDIR}/Module.symvers ${STAGING_KERNEL_BUILDDIR}/GLES.symvers +} + +# Clean up the module symbol file +CLEANFUNCS = "module_clean_symbol" + +module_clean_symbol() { + rm -f ${STAGING_KERNEL_BUILDDIR}/GLES.symvers +} + +RPROVIDES_${PN} += "kernel-module-pvrsrvkm kernel-module-dc-linuxfb" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-iccom/kernel-module-iccom-hwspinlock-sample.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-iccom/kernel-module-iccom-hwspinlock-sample.bb new file mode 100644 index 0000000..c088e0f --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-iccom/kernel-module-iccom-hwspinlock-sample.bb @@ -0,0 +1,32 @@ +DESCRIPTION = "Linux ICCOM hwspinlock Sample Driver for Renesas R-Car Gen3" + +require include/rcar-gen3-modules-common.inc +require include/iccom-control.inc + +LICENSE = "GPLv2" +LIC_FILES_CHKSUM = "file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263" + +inherit module distro_features_check + +DEPENDS = "linux-renesas" +PN = "kernel-module-iccom-hwspinlock-sample" +PR = "r0" + +REQUIRED_DISTRO_FEATURES = "iccom" + +SRC_URI = "file://iccom-hwspinlock-sample.tar.bz2" + +S = "${WORKDIR}/iccom-hwspinlock-sample" +B = "${S}/iccom-hwspinlock-sample" + +do_install () { + # Create destination directory + install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/ + + # Install kernel module + install -m 644 ${B}/iccom_hwspinlock_sample.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/ +} + +FILES_${PN} = " \ + /lib/modules/${KERNEL_VERSION}/extra/iccom_hwspinlock_sample.ko \ +" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-iccom/kernel-module-iccom-mfis.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-iccom/kernel-module-iccom-mfis.bb new file mode 100644 index 0000000..b2132ad --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-iccom/kernel-module-iccom-mfis.bb @@ -0,0 +1,35 @@ +DESCRIPTION = "Linux ICCOM MFIS Driver for Renesas R-Car Gen3" + +require include/rcar-gen3-modules-common.inc +require include/iccom-control.inc + +LICENSE = "GPLv2" +LIC_FILES_CHKSUM = "file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263" + +inherit module distro_features_check + +DEPENDS = "linux-renesas" +PN = "kernel-module-iccom-mfis" +PR = "r0" + +REQUIRED_DISTRO_FEATURES = "iccom" + +SRC_URI = "file://iccom-mfis.tar.bz2" + +S = "${WORKDIR}/iccom-mfis" +B = "${S}/iccom-mfis/drv" + +do_install () { + # Create destination directory + install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/ + + # Install kernel module + install -m 644 ${B}/iccom_mfis.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/ +} + +FILES_${PN} = " \ + /lib/modules/${KERNEL_VERSION}/extra/iccom_mfis.ko \ +" + +# Autoload ICCOM MFIS Driver +KERNEL_MODULE_AUTOLOAD = "iccom_mfis" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/kernel-module-mmngr.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/kernel-module-mmngr.bb new file mode 100644 index 0000000..caf1fc3 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/kernel-module-mmngr.bb @@ -0,0 +1,70 @@ +DESCRIPTION = "Memory Manager Kernel module for Renesas R-Car Gen3" + +require mmngr_drv.inc +require include/dtv-dvd-control.inc + +DEPENDS = "linux-renesas" +PN = "kernel-module-mmngr" +PR = "r0" + +S = "${WORKDIR}/git" +MMNGR_DRV_DIR = "mmngr_drv/mmngr/mmngr-module/files/mmngr" + +MMNGR_CFG_salvator-x = "MMNGR_SALVATORX" +MMNGR_CFG_h3ulcb = "MMNGR_SALVATORX" +MMNGR_CFG_m3ulcb = "MMNGR_SALVATORX" + +includedir="/usr/local/include" +SSTATE_DUPWHITELIST += "${STAGING_INCDIR}" + +do_compile() { + export MMNGR_CONFIG=${MMNGR_CFG} + + if [ "X${USE_DTV}" = "X1" ]; then + export MMNGR_SSP_CONFIG="MMNGR_SSP_ENABLE" + else + export MMNGR_SSP_CONFIG="MMNGR_SSP_DISABLE" + fi + + export MMNGR_IPMMU_PMB_CONFIG="MMNGR_IPMMU_PMB_DISABLE" + + cd ${S}/${MMNGR_DRV_DIR}/drv + install -d ${INCSHARED} + make all +} + +do_install () { + # Create destination directories + install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/ + install -d ${KERNELSRC}/include + install -d ${D}/${includedir} + + # Install shared library to KERNELSRC(STAGING_KERNEL_DIR) for reference from other modules + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/${MMNGR_DRV_DIR}/drv/Module.symvers ${KERNELSRC}/include/mmngr.symvers + + # Install kernel module + install -m 644 ${S}/${MMNGR_DRV_DIR}/drv/mmngr.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/ + + # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR) + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/${MMNGR_DRV_DIR}/include/mmngr_public.h ${KERNELSRC}/include/ + install -m 644 ${S}/${MMNGR_DRV_DIR}/include/mmngr_private.h ${KERNELSRC}/include/ + install -m 644 ${S}/${MMNGR_DRV_DIR}/include/mmngr_public_cmn.h ${KERNELSRC}/include/ + install -m 644 ${S}/${MMNGR_DRV_DIR}/include/mmngr_private_cmn.h ${KERNELSRC}/include/ + + # Install shared header file to ${includedir} + install -m 644 ${S}/${MMNGR_DRV_DIR}/include/mmngr_public_cmn.h ${D}/${includedir}/ + install -m 644 ${S}/${MMNGR_DRV_DIR}/include/mmngr_private_cmn.h ${D}/${includedir}/ +} + +PACKAGES = "\ + ${PN} \ + ${PN}-dev \ +" + +FILES_${PN} = " \ + /lib/modules/${KERNEL_VERSION}/extra/mmngr.ko \ +" + +RPROVIDES_${PN} += "kernel-module-mmngr" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/kernel-module-mmngrbuf.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/kernel-module-mmngrbuf.bb new file mode 100644 index 0000000..b0d0085 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/kernel-module-mmngrbuf.bb @@ -0,0 +1,52 @@ +DESCRIPTION = "Memory Manager Buffer Kernel module for Renesas R-Car Gen3" + +require mmngr_drv.inc + +DEPENDS = "linux-renesas" +PN = "kernel-module-mmngrbuf" +PR = "r0" + +S = "${WORKDIR}/git" +MMNGRBUF_DRV_DIR = "mmngr_drv/mmngrbuf/mmngrbuf-module/files/mmngrbuf" + +includedir="/usr/local/include" +SSTATE_DUPWHITELIST += "${STAGING_INCDIR}" + +do_compile() { + cd ${S}/${MMNGRBUF_DRV_DIR}/drv + install -d ${INCSHARED} + make all +} + +do_install () { + # Create destination directories + install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/ + install -d ${KERNELSRC}/include + install -d ${D}/${includedir} + + # Install shared library to KERNELSRC(STAGING_KERNEL_DIR) for reference from other modules + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/${MMNGRBUF_DRV_DIR}/drv/Module.symvers ${KERNELSRC}/include/mmngrbuf.symvers + + # Install kernel module + install -m 644 ${S}/${MMNGRBUF_DRV_DIR}/drv/mmngrbuf.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/ + + # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR) + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/${MMNGRBUF_DRV_DIR}/include/mmngr_buf_private.h ${KERNELSRC}/include/ + install -m 644 ${S}/${MMNGRBUF_DRV_DIR}/include/mmngr_buf_private_cmn.h ${KERNELSRC}/include/ + + # Install shared header files to ${includedir} + install -m 644 ${S}/${MMNGRBUF_DRV_DIR}/include/mmngr_buf_private_cmn.h ${D}/${includedir}/ +} + +PACKAGES = "\ + ${PN} \ + ${PN}-dev \ +" + +FILES_${PN} = " \ + /lib/modules/${KERNEL_VERSION}/extra/mmngrbuf.ko \ +" + +RPROVIDES_${PN} += "kernel-module-mmngrbuf" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/mmngr_drv.inc b/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/mmngr_drv.inc new file mode 100644 index 0000000..d106c62 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/mmngr_drv.inc @@ -0,0 +1,13 @@ +LICENSE = "GPLv2 & MIT" +LIC_FILES_CHKSUM = " \ + file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://MIT-COPYING;md5=192063521ce782a445a3c9f99a8ad560 \ +" + +require include/rcar-gen3-modules-common.inc +inherit module + +MMNGR_DRV_URI = "git://github.com/renesas-rcar/mmngr_drv.git" + +SRC_URI = "${MMNGR_DRV_URI};branch=rcar_gen3" +SRCREV = "5757985acb1947811257ecb40cc70711d917b2a2" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-qos/kernel-module-qos.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-qos/kernel-module-qos.bb new file mode 100644 index 0000000..0e6e6eb --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-qos/kernel-module-qos.bb @@ -0,0 +1,59 @@ +DESCRIPTION = "QoS driver for the R-Car Gen3" + +require include/rcar-gen3-modules-common.inc + +LICENSE = "GPLv2 & MIT" +LIC_FILES_CHKSUM = " \ + file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://MIT-COPYING;md5=192063521ce782a445a3c9f99a8ad560 \ +" + +inherit module + +DEPENDS = "linux-renesas" +PN = "kernel-module-qos" +PR = "r0" + +QOS_DRV_URL = "git://github.com/renesas-rcar/qos_drv.git" +BRANCH = "rcar-gen3" +SRCREV = "63dc86f99688638d2f05ca0c94b494bb1ec39525" + +SRC_URI = "${QOS_DRV_URL};branch=${BRANCH}" + +S = "${WORKDIR}/git" +QOS_DRV_DIR = "qos-module/files/qos/drv" + +includedir = "/usr/local/include" + +do_compile() { + cd ${S}/${QOS_DRV_DIR}/ + oe_runmake +} + +do_install () { + # Create destination directries + install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/ + install -d ${D}/${includedir} + + # Install shared library to KERNELSRC(STAGING_KERNEL_DIR) for reference from other modules + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/${QOS_DRV_DIR}/Module.symvers ${KERNELSRC}/include/qos.symvers + + # Install kernel module + install -m 644 ${S}/${QOS_DRV_DIR}/qos.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/ + + # Install shared header files + install -m 644 ${S}/${QOS_DRV_DIR}/qos.h ${KERNELSRC}/include/ + install -m 644 ${S}/${QOS_DRV_DIR}/qos_public_common.h ${KERNELSRC}/include/ + install -m 644 ${S}/${QOS_DRV_DIR}/qos_public_common.h ${D}/${includedir}/ +} + +PACKAGES = " \ + ${PN} \ + ${PN}-dev \ + ${PN}-dbg \ +" + +FILES_${PN} = " \ + /lib/modules/${KERNEL_VERSION}/extra/qos.ko \ +" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-uvcs/kernel-module-uvcs-drv.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-uvcs/kernel-module-uvcs-drv.bb new file mode 100644 index 0000000..fa02d79 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-uvcs/kernel-module-uvcs-drv.bb @@ -0,0 +1,63 @@ +DESCRIPTION = "Kernel module of UVCS" +LICENSE = "GPLv2 & MIT" +LIC_FILES_CHKSUM = " \ + file://include/GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://src/lkm/GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://src/core/GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://src/cmn/GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://include/MIT-COPYING;md5=fea016ce2bdf2ec10080f69e9381d378 \ + file://src/lkm/MIT-COPYING;md5=fea016ce2bdf2ec10080f69e9381d378 \ + file://src/core/MIT-COPYING;md5=fea016ce2bdf2ec10080f69e9381d378 \ + file://src/cmn/MIT-COPYING;md5=fea016ce2bdf2ec10080f69e9381d378 \ +" +require include/omx-control.inc +inherit module +PR = "r0" + +UVCS_SRC = "${@base_conditional('USE_VIDEO_OMX', '1', 'file://RCG3VUDRL4001ZDO.tar.bz2', '', d)}" +SRC_URI = "${UVCS_SRC}" +S = "${WORKDIR}/RCG3VUDRL4001ZDO" + +EXTRA_OEMAKE = "KERNELDIR=${STAGING_KERNEL_BUILDDIR}" +EXTRA_OEMAKE += "CROSS_COMPILE=${CROSS_COMPILE}" + +B="${S}/src/makefile" + +includedir = "/usr/local/include" + +do_compile_prepend() { + export UVCS_SRC="${S}/src" + export UVCS_INC="${S}" + export VCP4_SRC="${S}/src" +} + +do_install() { + # Create destination directory + install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/ + install -d ${D}/${includedir}/ + + # Install kernel module + install -m 644 ${B}/uvcs_drv.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/ + + # Install module symbol file + install -m 644 ${B}/Module.symvers ${STAGING_KERNEL_BUILDDIR}/UVCS.symvers + + # Install shared header file + install -m 644 ${S}/include/uvcs_ioctl.h ${D}/${includedir}/ +} + +# Clean up the module symbol file +CLEANFUNCS = "module_clean_symbol" + +module_clean_symbol() { + rm -f ${STAGING_KERNEL_BUILDDIR}/UVCS.symvers +} + +PACKAGES = " \ + ${PN} \ + ${PN}-sstate \ +" + +FILES_${PN}-sstate = " \ + ${includedir}/uvcs_ioctl.h \ +" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-vsp2driver/kernel-module-vsp2driver.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-vsp2driver/kernel-module-vsp2driver.bb new file mode 100644 index 0000000..45b8d86 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-vsp2driver/kernel-module-vsp2driver.bb @@ -0,0 +1,59 @@ +DESCRIPTION = "VSP2Driver for the R-Car Gen3" + +LICENSE = "GPLv2 & MIT" +LIC_FILES_CHKSUM = " \ + file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://MIT-COPYING;md5=192063521ce782a445a3c9f99a8ad560 \ +" + +require include/rcar-gen3-modules-common.inc + +inherit module + +DEPENDS = "linux-renesas kernel-module-vspm" +PN = "kernel-module-vsp2driver" +PR = "r0" + +VSP2DRIVER_URL = " \ + git://github.com/renesas-rcar/vsp2driver.git" +BRANCH = "rcar-gen3" +SRCREV = "d96345b179973987731e2ef1b83c3b45395862db" + +SRC_URI = "${VSP2DRIVER_URL};branch=${BRANCH}" + +S = "${WORKDIR}/git" + +do_compile() { + cd ${S}/vsp2driver + make all +} + +do_install () { + # Create destination directories + install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/ + install -d ${KERNELSRC}/include + + # Install shared library to KERNELSRC(STAGING_KERNEL_DIR) for reference from other modules + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/vsp2driver/Module.symvers ${KERNELSRC}/include/vsp2.symvers + + # Copy kernel module + install -m 644 ${S}/vsp2driver/vsp2.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/ + + # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR) + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/vsp2driver/linux/vsp2.h ${KERNELSRC}/include/ +} + +PACKAGES = "\ + ${PN} \ +" + +FILES_${PN} = " \ + /lib/modules/${KERNEL_VERSION}/extra/vsp2.ko \ +" + +RPROVIDES_${PN} += "kernel-module-vsp2driver kernel-module-vsp2" + +# Autoload VSP2Driver +KERNEL_MODULE_AUTOLOAD = "vsp2" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-vspm/kernel-module-vspm.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-vspm/kernel-module-vspm.bb new file mode 100644 index 0000000..698dd58 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-vspm/kernel-module-vspm.bb @@ -0,0 +1,86 @@ +DESCRIPTION = "VSP Manager for the R-Car Gen3" + +require include/rcar-gen3-modules-common.inc + +LICENSE = "GPLv2 & MIT" +LIC_FILES_CHKSUM = " \ + file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://MIT-COPYING;md5=0ebf15a927e436cec699371cd890775c \ +" + +inherit module + +DEPENDS = "linux-renesas" +PN = "kernel-module-vspm" +PR = "r0" + +VSPM_DRV_URL = "git://github.com/renesas-rcar/vspm_drv.git" +BRANCH = "rcar_gen3" +SRCREV = "a55d7823cef3c5402b77f90978e0e60ea367d56d" + +SRC_URI = "${VSPM_DRV_URL};branch=${BRANCH}" + +S = "${WORKDIR}/git" +VSPM_DRV_DIR = "vspm-module/files/vspm" +includedir = "/usr/local/include" + +do_compile() { + cd ${S}/${VSPM_DRV_DIR}/drv + make all +} + +do_install () { + # Create destination directories + install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/ + install -d ${KERNELSRC}/include + install -d ${D}/${includedir} + + # Install shared library to KERNELSRC(STAGING_KERNEL_DIR) for reference from other modules + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/${VSPM_DRV_DIR}/drv/Module.symvers ${KERNELSRC}/include/vspm.symvers + + # Install kernel module + install -m 644 ${S}/${VSPM_DRV_DIR}/drv/vspm.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/ + + # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR) + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/${VSPM_DRV_DIR}/include/vspm_public.h ${KERNELSRC}/include/ + install -m 644 ${S}/${VSPM_DRV_DIR}/include/vspm_cmn.h ${KERNELSRC}/include/ + install -m 644 ${S}/${VSPM_DRV_DIR}/include/vsp_drv.h ${KERNELSRC}/include/ + install -m 644 ${S}/${VSPM_DRV_DIR}/include/fdp_drv.h ${KERNELSRC}/include/ + + # Install shared header files + install -m 644 ${S}/${VSPM_DRV_DIR}/include/vspm_cmn.h ${D}/${includedir}/ + install -m 644 ${S}/${VSPM_DRV_DIR}/include/vsp_drv.h ${D}/${includedir}/ + install -m 644 ${S}/${VSPM_DRV_DIR}/include/fdp_drv.h ${D}/${includedir}/ +} + +do_populate_sysroot[sstate-inputdirs] += "${S}/${VSPM_DRV_DIR}/include/" +do_populate_sysroot[sstate-outputdirs] += "${KERNELSRC}/include/" +do_populate_sysroot_setscene[prefuncs] = "vspm_sstate_check_func" +SSTATE_DUPWHITELIST = "${KERNELSRC}/include" + +vspm_sstate_check_func() { + # An error is returned when unpack of kernel source has not been completed yet. + # By returning error, rebuild task runs by force (Invalidating sstate). + # This module installs shared header files in ${KERNELSRC}/include by + # sstate cache. + # Those files will be deleted by unpack task of kernel. + if [ ! -d "${KERNELSRC}/include" ]; then + exit 1 + fi +} + +PACKAGES = " \ + ${PN} \ + ${PN}-dev \ +" + +FILES_${PN} = " \ + /lib/modules/${KERNEL_VERSION}/extra/vspm.ko \ +" + +RPROVIDES_${PN} += "kernel-module-vspm" + +# Autoload VSPM +KERNEL_MODULE_AUTOLOAD = "vspm" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-vspmif/kernel-module-vspmif.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-vspmif/kernel-module-vspmif.bb new file mode 100644 index 0000000..1ddd256 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-vspmif/kernel-module-vspmif.bb @@ -0,0 +1,64 @@ +DESCRIPTION = "VSP Manager Interface driver for the R-Car Gen3" + +require include/rcar-gen3-modules-common.inc + +LICENSE = "GPLv2 & MIT" +LIC_FILES_CHKSUM = " \ + file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://MIT-COPYING;md5=0ebf15a927e436cec699371cd890775c \ +" + +inherit module + +DEPENDS = "linux-renesas kernel-module-vspm" +PN = "kernel-module-vspmif" +PR = "r0" + +VSPMIF_DRV_URL = " \ + git://github.com/renesas-rcar/vspmif_drv.git" +BRANCH = "rcar_gen3" +SRCREV = "53c02b5f969be6a615c211e52a7b2721c8c36ed0" + +SRC_URI = "${VSPMIF_DRV_URL};branch=${BRANCH}" + +S = "${WORKDIR}/git" +VSPMIF_DRV_DIR = "vspm_if-module/files/vspm_if" + +includedir = "/usr/local/include" + +do_compile() { + cd ${S}/${VSPMIF_DRV_DIR}/drv + make all +} + +do_install () { + # Create destination directories + install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/ + install -d ${D}/${includedir} + install -d ${KERNELSRC}/include + + # Install shared library to KERNELSRC(STAGING_KERNEL_DIR) for reference from other modules + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/${VSPMIF_DRV_DIR}/drv/Module.symvers ${KERNELSRC}/include/vspm_if.symvers + + # Install kernel module + install -m 644 ${S}/${VSPMIF_DRV_DIR}/drv/vspm_if.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/ + + # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR) + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/${VSPMIF_DRV_DIR}/include/vspm_if.h ${KERNELSRC}/include/ + + # Install shared header file + install -m 644 ${S}/${VSPMIF_DRV_DIR}/include/vspm_if.h ${D}/${includedir}/ +} + +PACKAGES = "\ + ${PN} \ + ${PN}-dev \ +" + +FILES_${PN} = " \ + /lib/modules/${KERNEL_VERSION}/extra/vspm_if.ko \ +" + +RPROVIDES_${PN} += "kernel-module-vspmif kernel-module-vspm-if" diff --git a/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers_4.9.bb b/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers_4.9.bb new file mode 100644 index 0000000..78e8006 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers_4.9.bb @@ -0,0 +1,10 @@ +require recipes-kernel/linux-libc-headers/linux-libc-headers.inc + +RENESAS_BSP_URL = " \ + git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas-bsp.git" +BRANCH = "v4.9/rcar-3.5.1" +SRCREV = "13e7680774d9103bb2685635238bcf577a52ff96" + +SRC_URI = "${RENESAS_BSP_URL};branch=${BRANCH}" + +S = "${WORKDIR}/git" diff --git a/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/h3ulcb/defconfig b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/h3ulcb/defconfig new file mode 100644 index 0000000..6547d0f --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/h3ulcb/defconfig @@ -0,0 +1,5695 @@ +# +# Automatically generated file; DO NOT EDIT. +# Linux/arm64 4.9.0 Kernel Configuration +# +CONFIG_ARM64=y +CONFIG_64BIT=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y +CONFIG_MMU=y +CONFIG_DEBUG_RODATA=y +CONFIG_ARM64_PAGE_SHIFT=12 +CONFIG_ARM64_CONT_SHIFT=4 +CONFIG_ARCH_MMAP_RND_BITS_MIN=18 +CONFIG_ARCH_MMAP_RND_BITS_MAX=33 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16 +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CSUM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_HAVE_GENERIC_RCU_GUP=y +CONFIG_ARCH_DMA_ADDR_T_64BIT=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_SG_DMA_LENGTH=y +CONFIG_SMP=y +CONFIG_SWIOTLB=y +CONFIG_IOMMU_HELPER=y +CONFIG_KERNEL_MODE_NEON=y +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_PGTABLE_LEVELS=4 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_IRQ_WORK=y +CONFIG_BUILDTIME_EXTABLE_SORT=y + +# +# General setup +# +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_CROSS_COMPILE="" +# CONFIG_COMPILE_TEST is not set +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_DEFAULT_HOSTNAME="(none)" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_CROSS_MEMORY_ATTACH=y +CONFIG_FHANDLE=y +# CONFIG_USELIB is not set +CONFIG_AUDIT=y +CONFIG_HAVE_ARCH_AUDITSYSCALL=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_WATCH=y +CONFIG_AUDIT_TREE=y + +# +# IRQ subsystem +# +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y +CONFIG_GENERIC_IRQ_MIGRATION=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_DOMAIN_HIERARCHY=y +CONFIG_GENERIC_MSI_IRQ=y +CONFIG_GENERIC_MSI_IRQ_DOMAIN=y +CONFIG_HANDLE_DOMAIN_IRQ=y +# CONFIG_IRQ_DOMAIN_DEBUG is not set +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_SPARSE_IRQ=y +CONFIG_ARCH_CLOCKSOURCE_DATA=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_ARCH_HAS_TICK_BROADCAST=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y + +# +# Timers subsystem +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ_COMMON=y +# CONFIG_HZ_PERIODIC is not set +CONFIG_NO_HZ_IDLE=y +# CONFIG_NO_HZ_FULL is not set +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y + +# +# CPU/Task time and stats accounting +# +CONFIG_TICK_CPU_ACCOUNTING=y +# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set +# CONFIG_IRQ_TIME_ACCOUNTING is not set +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y + +# +# RCU Subsystem +# +CONFIG_PREEMPT_RCU=y +# CONFIG_RCU_EXPERT is not set +CONFIG_SRCU=y +# CONFIG_TASKS_RCU is not set +CONFIG_RCU_STALL_COMMON=y +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_RCU_EXPEDITE_BOOT is not set +CONFIG_BUILD_BIN2C=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y +CONFIG_CGROUPS=y +CONFIG_PAGE_COUNTER=y +CONFIG_MEMCG=y +CONFIG_MEMCG_SWAP=y +CONFIG_MEMCG_SWAP_ENABLED=y +CONFIG_BLK_CGROUP=y +# CONFIG_DEBUG_BLK_CGROUP is not set +CONFIG_CGROUP_WRITEBACK=y +CONFIG_CGROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_CFS_BANDWIDTH is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_CGROUP_PIDS=y +# CONFIG_CGROUP_FREEZER is not set +CONFIG_CGROUP_HUGETLB=y +CONFIG_CPUSETS=y +CONFIG_PROC_PID_CPUSET=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_CGROUP_PERF=y +# CONFIG_CGROUP_DEBUG is not set +# CONFIG_CHECKPOINT_RESTORE is not set +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y +CONFIG_NET_NS=y +CONFIG_SCHED_AUTOGROUP=y +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_XZ=y +CONFIG_RD_LZO=y +CONFIG_RD_LZ4=y +CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_HAVE_UID16=y +CONFIG_SYSCTL_EXCEPTION_TRACE=y +CONFIG_BPF=y +# CONFIG_EXPERT is not set +CONFIG_UID16=y +CONFIG_MULTIUSER=y +# CONFIG_SGETMASK_SYSCALL is not set +CONFIG_SYSFS_SYSCALL=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set +CONFIG_KALLSYMS_BASE_RELATIVE=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +# CONFIG_BPF_SYSCALL is not set +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_ADVISE_SYSCALLS=y +# CONFIG_USERFAULTFD is not set +CONFIG_PCI_QUIRKS=y +CONFIG_MEMBARRIER=y +# CONFIG_EMBEDDED is not set +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +CONFIG_PERF_EVENTS=y +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_COMPAT_BRK is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLAB_FREELIST_RANDOM is not set +CONFIG_SLUB_CPU_PARTIAL=y +# CONFIG_SYSTEM_DATA_VERIFICATION is not set +CONFIG_PROFILING=y +CONFIG_KEXEC_CORE=y +# CONFIG_KPROBES is not set +CONFIG_JUMP_LABEL=y +# CONFIG_STATIC_KEYS_SELFTEST is not set +# CONFIG_UPROBES is not set +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_HW_BREAKPOINT=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_RCU_TABLE_FREE=y +CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y +CONFIG_HAVE_CMPXCHG_LOCAL=y +CONFIG_HAVE_CMPXCHG_DOUBLE=y +CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_SECCOMP_FILTER=y +CONFIG_HAVE_GCC_PLUGINS=y +# CONFIG_GCC_PLUGINS is not set +CONFIG_HAVE_CC_STACKPROTECTOR=y +# CONFIG_CC_STACKPROTECTOR is not set +CONFIG_CC_STACKPROTECTOR_NONE=y +# CONFIG_CC_STACKPROTECTOR_REGULAR is not set +# CONFIG_CC_STACKPROTECTOR_STRONG is not set +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y +CONFIG_HAVE_ARCH_HUGE_VMAP=y +CONFIG_MODULES_USE_ELF_RELA=y +CONFIG_ARCH_HAS_ELF_RANDOMIZE=y +CONFIG_HAVE_ARCH_MMAP_RND_BITS=y +CONFIG_ARCH_MMAP_RND_BITS=18 +CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y +CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11 +# CONFIG_HAVE_ARCH_HASH is not set +# CONFIG_ISA_BUS_API is not set +CONFIG_CLONE_BACKWARDS=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_COMPAT_OLD_SIGACTION=y +# CONFIG_CPU_NO_EFFICIENT_FFS is not set +# CONFIG_HAVE_ARCH_VMAP_STACK is not set + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_MODULE_SIG is not set +# CONFIG_MODULE_COMPRESS is not set +# CONFIG_TRIM_UNUSED_KSYMS is not set +CONFIG_MODULES_TREE_LOOKUP=y +CONFIG_BLOCK=y +CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_BSGLIB is not set +CONFIG_BLK_DEV_INTEGRITY=y +# CONFIG_BLK_DEV_THROTTLING is not set +# CONFIG_BLK_CMDLINE_PARSER is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_EFI_PARTITION=y +CONFIG_BLOCK_COMPAT=y +CONFIG_BLK_MQ_PCI=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_CFQ_GROUP_IOSCHED is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_PREEMPT_NOTIFIERS=y +CONFIG_UNINLINE_SPIN_UNLOCK=y +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +CONFIG_LOCK_SPIN_ON_OWNER=y +CONFIG_FREEZER=y + +# +# Platform selection +# +CONFIG_ARCH_SUNXI=y +CONFIG_ARCH_ALPINE=y +# CONFIG_ARCH_BCM2835 is not set +CONFIG_ARCH_BCM_IPROC=y +CONFIG_ARCH_BERLIN=y +# CONFIG_ARCH_BRCMSTB is not set +CONFIG_ARCH_EXYNOS=y +CONFIG_ARCH_LAYERSCAPE=y +CONFIG_ARCH_LG1K=y +CONFIG_ARCH_HISI=y +CONFIG_ARCH_MEDIATEK=y +CONFIG_ARCH_MESON=y +CONFIG_ARCH_MVEBU=y +CONFIG_ARCH_QCOM=y +CONFIG_ARCH_ROCKCHIP=y +CONFIG_ARCH_SEATTLE=y +CONFIG_ARCH_SHMOBILE=y +CONFIG_ARCH_RENESAS=y +CONFIG_ARCH_R8A7795=y +CONFIG_ARCH_R8A7796=y +CONFIG_ARCH_STRATIX10=y +CONFIG_ARCH_TEGRA=y +CONFIG_ARCH_SPRD=y +CONFIG_ARCH_THUNDER=y +CONFIG_ARCH_UNIPHIER=y +CONFIG_ARCH_VEXPRESS=y +CONFIG_ARCH_VULCAN=y +CONFIG_ARCH_XGENE=y +CONFIG_ARCH_ZX=y +CONFIG_ARCH_ZYNQMP=y + +# +# Bus support +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_DOMAINS_GENERIC=y +CONFIG_PCI_SYSCALL=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCIEAER=y +# CONFIG_PCIE_ECRC is not set +# CONFIG_PCIEAER_INJECT is not set +CONFIG_PCIEASPM=y +# CONFIG_PCIEASPM_DEBUG is not set +CONFIG_PCIEASPM_DEFAULT=y +# CONFIG_PCIEASPM_POWERSAVE is not set +# CONFIG_PCIEASPM_PERFORMANCE is not set +CONFIG_PCIE_PME=y +# CONFIG_PCIE_DPC is not set +# CONFIG_PCIE_PTM is not set +CONFIG_PCI_BUS_ADDR_T_64BIT=y +CONFIG_PCI_MSI=y +CONFIG_PCI_MSI_IRQ_DOMAIN=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set +# CONFIG_PCI_STUB is not set +CONFIG_PCI_ATS=y +CONFIG_PCI_ECAM=y +CONFIG_PCI_IOV=y +# CONFIG_PCI_PRI is not set +# CONFIG_PCI_PASID is not set +CONFIG_PCI_LABEL=y +# CONFIG_HOTPLUG_PCI is not set + +# +# PCI host controller drivers +# +CONFIG_PCI_AARDVARK=y +# CONFIG_PCIE_XILINX_NWL is not set +# CONFIG_PCIE_DW_PLAT is not set +CONFIG_PCIE_DW=y +CONFIG_PCIE_RCAR=y +CONFIG_PCI_HOST_COMMON=y +CONFIG_PCI_HOST_GENERIC=y +CONFIG_PCI_XGENE=y +CONFIG_PCI_XGENE_MSI=y +CONFIG_PCI_LAYERSCAPE=y +CONFIG_PCIE_IPROC=y +CONFIG_PCIE_IPROC_PLATFORM=y +CONFIG_PCIE_IPROC_MSI=y +CONFIG_PCI_HISI=y +CONFIG_PCIE_QCOM=y +# CONFIG_PCI_HOST_THUNDER_PEM is not set +# CONFIG_PCI_HOST_THUNDER_ECAM is not set +CONFIG_PCIE_ARMADA_8K=y +# CONFIG_PCIE_ROCKCHIP is not set + +# +# Kernel Features +# + +# +# ARM errata workarounds via the alternatives framework +# +CONFIG_ARM64_ERRATUM_826319=y +CONFIG_ARM64_ERRATUM_827319=y +CONFIG_ARM64_ERRATUM_824069=y +CONFIG_ARM64_ERRATUM_819472=y +CONFIG_ARM64_ERRATUM_832075=y +CONFIG_ARM64_ERRATUM_834220=y +CONFIG_ARM64_ERRATUM_845719=y +CONFIG_ARM64_ERRATUM_843419=y +CONFIG_CAVIUM_ERRATUM_22375=y +CONFIG_CAVIUM_ERRATUM_23154=y +CONFIG_CAVIUM_ERRATUM_27456=y +CONFIG_ARM64_4K_PAGES=y +# CONFIG_ARM64_16K_PAGES is not set +# CONFIG_ARM64_64K_PAGES is not set +# CONFIG_ARM64_VA_BITS_39 is not set +CONFIG_ARM64_VA_BITS_48=y +CONFIG_ARM64_VA_BITS=48 +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SCHED_MC=y +# CONFIG_SCHED_SMT is not set +CONFIG_NR_CPUS=64 +CONFIG_HOTPLUG_CPU=y +# CONFIG_NUMA is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_PREEMPT_COUNT=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_HAVE_ARCH_PFN_VALID=y +CONFIG_HW_PERF_EVENTS=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y +CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y +CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_SPARSEMEM_VMEMMAP=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_NO_BOOTMEM=y +CONFIG_MEMORY_ISOLATION=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MEMORY_BALLOON=y +CONFIG_BALLOON_COMPACTION=y +CONFIG_COMPACTION=y +CONFIG_MIGRATION=y +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_BOUNCE=y +CONFIG_MMU_NOTIFIER=y +CONFIG_KSM=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y +# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set +CONFIG_TRANSPARENT_HUGE_PAGECACHE=y +# CONFIG_CLEANCACHE is not set +# CONFIG_FRONTSWAP is not set +CONFIG_CMA=y +# CONFIG_CMA_DEBUG is not set +# CONFIG_CMA_DEBUGFS is not set +CONFIG_CMA_AREAS=7 +# CONFIG_ZPOOL is not set +# CONFIG_ZBUD is not set +# CONFIG_ZSMALLOC is not set +CONFIG_GENERIC_EARLY_IOREMAP=y +# CONFIG_IDLE_PAGE_TRACKING is not set +CONFIG_FRAME_VECTOR=y +CONFIG_SECCOMP=y +CONFIG_PARAVIRT=y +# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set +CONFIG_KEXEC=y +CONFIG_XEN_DOM0=y +CONFIG_XEN=y +CONFIG_FORCE_MAX_ZONEORDER=11 +# CONFIG_ARMV8_DEPRECATED is not set + +# +# ARMv8.1 architectural features +# +CONFIG_ARM64_HW_AFDBM=y +CONFIG_ARM64_PAN=y +# CONFIG_ARM64_LSE_ATOMICS is not set +CONFIG_ARM64_VHE=y + +# +# ARMv8.2 architectural features +# +CONFIG_ARM64_UAO=y +CONFIG_ARM64_MODULE_CMODEL_LARGE=y +# CONFIG_RANDOMIZE_BASE is not set + +# +# Boot options +# +# CONFIG_ARM64_ACPI_PARKING_PROTOCOL is not set +CONFIG_CMDLINE="" +# CONFIG_CMDLINE_FORCE is not set +CONFIG_EFI_STUB=y +CONFIG_EFI=y +CONFIG_DMI=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_COMPAT_BINFMT_ELF=y +CONFIG_ELFCORE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_BINFMT_SCRIPT=y +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_COREDUMP=y +CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y + +# +# Power management options +# +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_HIBERNATION is not set +CONFIG_PM_SLEEP=y +CONFIG_PM_SLEEP_SMP=y +# CONFIG_PM_AUTOSLEEP is not set +# CONFIG_PM_WAKELOCKS is not set +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_OPP=y +CONFIG_PM_CLK=y +CONFIG_PM_GENERIC_DOMAINS=y +# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set +CONFIG_PM_GENERIC_DOMAINS_SLEEP=y +CONFIG_PM_GENERIC_DOMAINS_OF=y +CONFIG_CPU_PM=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# CPU Power Management +# + +# +# CPU Idle +# +CONFIG_CPU_IDLE=y +# CONFIG_CPU_IDLE_GOV_LADDER is not set +CONFIG_CPU_IDLE_GOV_MENU=y +CONFIG_DT_IDLE_STATES=y + +# +# ARM CPU Idle Drivers +# +CONFIG_ARM_CPUIDLE=y +# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_GOV_ATTR_SET=y +CONFIG_CPU_FREQ_GOV_COMMON=y +# CONFIG_CPU_FREQ_STAT is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y + +# +# CPU frequency scaling drivers +# +CONFIG_CPUFREQ_DT=y +CONFIG_CPUFREQ_DT_PLATDEV=y +CONFIG_ARM_BIG_LITTLE_CPUFREQ=y +# CONFIG_ARM_DT_BL_CPUFREQ is not set +# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set +# CONFIG_ARM_MT8173_CPUFREQ is not set +CONFIG_ARM_SCPI_CPUFREQ=y +CONFIG_ARM_TEGRA20_CPUFREQ=y +CONFIG_ARM_TEGRA124_CPUFREQ=y +# CONFIG_ACPI_CPPC_CPUFREQ is not set +CONFIG_NET=y +CONFIG_NET_INGRESS=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_DIAG is not set +CONFIG_UNIX=y +# CONFIG_UNIX_DIAG is not set +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE_DEMUX is not set +CONFIG_NET_IP_TUNNEL=m +# CONFIG_IP_MROUTE is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_NET_IPVTI is not set +# CONFIG_NET_UDP_TUNNEL is not set +# CONFIG_NET_FOU is not set +# CONFIG_NET_FOU_IP_TUNNELS is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_INET_UDP_DIAG is not set +# CONFIG_INET_DIAG_DESTROY is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_IPV6_ILA is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +# CONFIG_IPV6_VTI is not set +CONFIG_IPV6_SIT=m +# CONFIG_IPV6_SIT_6RD is not set +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_FOU is not set +# CONFIG_IPV6_FOU_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NET_PTP_CLASSIFY=y +# CONFIG_NETWORK_PHY_TIMESTAMPING is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=m + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_INGRESS=y +# CONFIG_NETFILTER_NETLINK_ACCT is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +CONFIG_NF_CONNTRACK=m +CONFIG_NF_LOG_COMMON=m +# CONFIG_NF_CONNTRACK_MARK is not set +CONFIG_NF_CONNTRACK_PROCFS=y +CONFIG_NF_CONNTRACK_EVENTS=y +# CONFIG_NF_CONNTRACK_TIMEOUT is not set +# CONFIG_NF_CONNTRACK_TIMESTAMP is not set +# CONFIG_NF_CT_PROTO_DCCP is not set +# CONFIG_NF_CT_PROTO_SCTP is not set +# CONFIG_NF_CT_PROTO_UDPLITE is not set +# CONFIG_NF_CONNTRACK_AMANDA is not set +# CONFIG_NF_CONNTRACK_FTP is not set +# CONFIG_NF_CONNTRACK_H323 is not set +# CONFIG_NF_CONNTRACK_IRC is not set +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +# CONFIG_NF_CONNTRACK_SNMP is not set +# CONFIG_NF_CONNTRACK_PPTP is not set +# CONFIG_NF_CONNTRACK_SANE is not set +# CONFIG_NF_CONNTRACK_SIP is not set +# CONFIG_NF_CONNTRACK_TFTP is not set +# CONFIG_NF_CT_NETLINK is not set +# CONFIG_NF_CT_NETLINK_TIMEOUT is not set +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +# CONFIG_NF_NAT_AMANDA is not set +# CONFIG_NF_NAT_FTP is not set +# CONFIG_NF_NAT_IRC is not set +# CONFIG_NF_NAT_SIP is not set +# CONFIG_NF_NAT_TFTP is not set +# CONFIG_NF_NAT_REDIRECT is not set +# CONFIG_NF_TABLES is not set +CONFIG_NETFILTER_XTABLES=m + +# +# Xtables combined modules +# +# CONFIG_NETFILTER_XT_MARK is not set +# CONFIG_NETFILTER_XT_CONNMARK is not set + +# +# Xtables targets +# +# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_HL is not set +# CONFIG_NETFILTER_XT_TARGET_HMARK is not set +# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set +# CONFIG_NETFILTER_XT_TARGET_LED is not set +CONFIG_NETFILTER_XT_TARGET_LOG=m +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +CONFIG_NETFILTER_XT_NAT=m +# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set +# CONFIG_NETFILTER_XT_TARGET_TEE is not set +# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set + +# +# Xtables matches +# +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +# CONFIG_NETFILTER_XT_MATCH_BPF is not set +# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set +# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set +# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set +# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +# CONFIG_NETFILTER_XT_MATCH_CPU is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ECN is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_HELPER is not set +# CONFIG_NETFILTER_XT_MATCH_HL is not set +# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set +# CONFIG_NETFILTER_XT_MATCH_L2TP is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set +# CONFIG_NETFILTER_XT_MATCH_STATE is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_IP_SET is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +# CONFIG_NF_DUP_IPV4 is not set +# CONFIG_NF_LOG_ARP is not set +CONFIG_NF_LOG_IPV4=m +CONFIG_NF_REJECT_IPV4=m +CONFIG_NF_NAT_IPV4=m +CONFIG_NF_NAT_MASQUERADE_IPV4=m +# CONFIG_NF_NAT_PPTP is not set +# CONFIG_NF_NAT_H323 is not set +CONFIG_IP_NF_IPTABLES=m +# CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_RPFILTER is not set +# CONFIG_IP_NF_MATCH_TTL is not set +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +# CONFIG_IP_NF_TARGET_SYNPROXY is not set +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_TARGET_MASQUERADE=m +# CONFIG_IP_NF_TARGET_NETMAP is not set +# CONFIG_IP_NF_TARGET_REDIRECT is not set +CONFIG_IP_NF_MANGLE=m +# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +# CONFIG_IP_NF_TARGET_ECN is not set +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_RAW is not set +# CONFIG_IP_NF_SECURITY is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV6=m +CONFIG_NF_CONNTRACK_IPV6=m +# CONFIG_NF_DUP_IPV6 is not set +CONFIG_NF_REJECT_IPV6=m +CONFIG_NF_LOG_IPV6=m +CONFIG_NF_NAT_IPV6=m +CONFIG_NF_NAT_MASQUERADE_IPV6=m +CONFIG_IP6_NF_IPTABLES=m +# CONFIG_IP6_NF_MATCH_AH is not set +# CONFIG_IP6_NF_MATCH_EUI64 is not set +# CONFIG_IP6_NF_MATCH_FRAG is not set +# CONFIG_IP6_NF_MATCH_OPTS is not set +# CONFIG_IP6_NF_MATCH_HL is not set +# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set +# CONFIG_IP6_NF_MATCH_MH is not set +# CONFIG_IP6_NF_MATCH_RPFILTER is not set +# CONFIG_IP6_NF_MATCH_RT is not set +# CONFIG_IP6_NF_TARGET_HL is not set +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +# CONFIG_IP6_NF_TARGET_SYNPROXY is not set +CONFIG_IP6_NF_MANGLE=m +# CONFIG_IP6_NF_RAW is not set +# CONFIG_IP6_NF_SECURITY is not set +CONFIG_IP6_NF_NAT=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +# CONFIG_IP6_NF_TARGET_NPT is not set +# CONFIG_BRIDGE_NF_EBTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_L2TP is not set +CONFIG_STP=m +CONFIG_GARP=m +CONFIG_MRP=m +CONFIG_BRIDGE=m +CONFIG_BRIDGE_IGMP_SNOOPING=y +CONFIG_BRIDGE_VLAN_FILTERING=y +CONFIG_HAVE_NET_DSA=y +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_VLAN_8021Q_MVRP=y +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_PHONET is not set +# CONFIG_6LOWPAN is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set +CONFIG_DNS_RESOLVER=y +# CONFIG_BATMAN_ADV is not set +# CONFIG_OPENVSWITCH is not set +# CONFIG_VSOCKETS is not set +# CONFIG_NETLINK_DIAG is not set +# CONFIG_MPLS is not set +# CONFIG_HSR is not set +# CONFIG_NET_SWITCHDEV is not set +# CONFIG_NET_L3_MASTER_DEV is not set +# CONFIG_QRTR is not set +# CONFIG_NET_NCSI is not set +CONFIG_RPS=y +CONFIG_RFS_ACCEL=y +CONFIG_XPS=y +# CONFIG_SOCK_CGROUP_DATA is not set +# CONFIG_CGROUP_NET_PRIO is not set +# CONFIG_CGROUP_NET_CLASSID is not set +CONFIG_NET_RX_BUSY_POLL=y +CONFIG_BQL=y +CONFIG_BPF_JIT=y +CONFIG_NET_FLOW_LIMIT=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_BREDR=y +# CONFIG_BT_RFCOMM is not set +# CONFIG_BT_BNEP is not set +CONFIG_BT_HIDP=m +# CONFIG_BT_HS is not set +# CONFIG_BT_LE is not set +CONFIG_BT_LEDS=y +# CONFIG_BT_SELFTEST is not set +# CONFIG_BT_DEBUGFS is not set + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIBTUSB is not set +# CONFIG_BT_HCIBTSDIO is not set +CONFIG_BT_HCIUART=m +# CONFIG_BT_HCIUART_H4 is not set +# CONFIG_BT_HCIUART_BCSP is not set +# CONFIG_BT_HCIUART_ATH3K is not set +CONFIG_BT_HCIUART_LL=y +# CONFIG_BT_HCIUART_3WIRE is not set +# CONFIG_BT_HCIUART_INTEL is not set +# CONFIG_BT_HCIUART_BCM is not set +# CONFIG_BT_HCIUART_QCA is not set +# CONFIG_BT_HCIUART_AG6XX is not set +# CONFIG_BT_HCIUART_MRVL is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_BT_MRVL is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_AF_KCM is not set +# CONFIG_STREAM_PARSER is not set +CONFIG_WIRELESS=y +CONFIG_CFG80211=m +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +CONFIG_CFG80211_DEFAULT_PS=y +# CONFIG_CFG80211_DEBUGFS is not set +# CONFIG_CFG80211_INTERNAL_REGDB is not set +CONFIG_CFG80211_CRDA_SUPPORT=y +# CONFIG_CFG80211_WEXT is not set +# CONFIG_LIB80211 is not set +CONFIG_MAC80211=m +CONFIG_MAC80211_HAS_RC=y +CONFIG_MAC80211_RC_MINSTREL=y +CONFIG_MAC80211_RC_MINSTREL_HT=y +# CONFIG_MAC80211_RC_MINSTREL_VHT is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_MESSAGE_TRACING is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 +# CONFIG_WIMAX is not set +CONFIG_RFKILL=m +CONFIG_RFKILL_LEDS=y +CONFIG_RFKILL_INPUT=y +# CONFIG_RFKILL_REGULATOR is not set +# CONFIG_RFKILL_GPIO is not set +CONFIG_NET_9P=y +CONFIG_NET_9P_VIRTIO=y +# CONFIG_NET_9P_DEBUG is not set +# CONFIG_CAIF is not set +# CONFIG_CEPH_LIB is not set +# CONFIG_NFC is not set +# CONFIG_LWTUNNEL is not set +CONFIG_DST_CACHE=y +# CONFIG_NET_DEVLINK is not set +CONFIG_MAY_USE_DEVLINK=y +CONFIG_HAVE_EBPF_JIT=y + +# +# Device Drivers +# +CONFIG_ARM_AMBA=y +CONFIG_TEGRA_AHB=y + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set +CONFIG_ALLOW_DEV_COREDUMP=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set +CONFIG_SYS_HYPERVISOR=y +# CONFIG_GENERIC_CPU_DEVICES is not set +CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_SOC_BUS=y +CONFIG_REGMAP=y +CONFIG_REGMAP_I2C=y +CONFIG_REGMAP_SPI=y +CONFIG_REGMAP_SPMI=y +CONFIG_REGMAP_MMIO=y +CONFIG_REGMAP_IRQ=y +CONFIG_DMA_SHARED_BUFFER=y +# CONFIG_FENCE_TRACE is not set +CONFIG_DMA_CMA=y + +# +# Default contiguous memory area size: +# +CONFIG_CMA_SIZE_MBYTES=16 +CONFIG_CMA_SIZE_SEL_MBYTES=y +# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set +# CONFIG_CMA_SIZE_SEL_MIN is not set +# CONFIG_CMA_SIZE_SEL_MAX is not set +CONFIG_CMA_ALIGNMENT=8 + +# +# Bus devices +# +# CONFIG_ARM_CCI400_PMU is not set +# CONFIG_ARM_CCI5xx_PMU is not set +# CONFIG_ARM_CCN is not set +# CONFIG_QCOM_EBI2 is not set +# CONFIG_SIMPLE_PM_BUS is not set +# CONFIG_SUNXI_RSB is not set +# CONFIG_TEGRA_ACONNECT is not set +CONFIG_UNIPHIER_SYSTEM_BUS=y +CONFIG_VEXPRESS_CONFIG=y +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_SM_FTL is not set +# CONFIG_MTD_OOPS is not set +# CONFIG_MTD_SWAP is not set +# CONFIG_MTD_PARTITIONED_MASTER is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_DATAFLASH is not set +CONFIG_MTD_M25P80=y +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOCG3 is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR & LPDDR2 PCM memory drivers +# +# CONFIG_MTD_LPDDR is not set +CONFIG_MTD_SPI_NOR=y +# CONFIG_MTD_MT81xx_NOR is not set +CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y +# CONFIG_SPI_FSL_QUADSPI is not set +# CONFIG_SPI_HISI_SFC is not set +# CONFIG_MTD_UBI is not set +CONFIG_DTC=y +CONFIG_OF=y +# CONFIG_OF_UNITTEST is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_ADDRESS_PCI=y +CONFIG_OF_IRQ=y +CONFIG_OF_NET=y +CONFIG_OF_MDIO=y +CONFIG_OF_PCI=y +CONFIG_OF_PCI_IRQ=y +CONFIG_OF_RESERVED_MEM=y +# CONFIG_OF_OVERLAY is not set +# CONFIG_PARPORT is not set +CONFIG_PNP=y +CONFIG_PNP_DEBUG_MESSAGES=y + +# +# Protocols +# +CONFIG_PNPACPI=y +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_NULL_BLK is not set +# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_DRBD is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SKD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_XEN_BLKDEV_FRONTEND=y +# CONFIG_XEN_BLKDEV_BACKEND is not set +CONFIG_VIRTIO_BLK=y +# CONFIG_BLK_DEV_RBD is not set +# CONFIG_BLK_DEV_RSXX is not set +# CONFIG_BLK_DEV_NVME is not set +# CONFIG_NVME_TARGET is not set + +# +# Misc devices +# +# CONFIG_SENSORS_LIS3LV02D is not set +# CONFIG_AD525X_DPOT is not set +# CONFIG_DUMMY_IRQ is not set +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_QCOM_COINCELL is not set +# CONFIG_APDS9802ALS is not set +# CONFIG_ISL29003 is not set +# CONFIG_ISL29020 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_SENSORS_BH1770 is not set +# CONFIG_SENSORS_APDS990X is not set +# CONFIG_HMC6352 is not set +# CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set +# CONFIG_USB_SWITCH_FSA9480 is not set +# CONFIG_LATTICE_ECP3_CONFIG is not set +CONFIG_SRAM=y +CONFIG_VEXPRESS_SYSCFG=y +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_EEPROM_93XX46 is not set +# CONFIG_CB710_CORE is not set + +# +# Texas Instruments shared transport line discipline +# +# CONFIG_TI_ST is not set +# CONFIG_SENSORS_LIS3_I2C is not set + +# +# Altera FPGA firmware download module +# +# CONFIG_ALTERA_STAPL is not set + +# +# Intel MIC Bus Driver +# + +# +# SCIF Bus Driver +# + +# +# VOP Bus Driver +# + +# +# Intel MIC Host Driver +# + +# +# Intel MIC Card Driver +# + +# +# SCIF Driver +# + +# +# Intel MIC Coprocessor State Management (COSM) Drivers +# + +# +# VOP Driver +# +# CONFIG_GENWQE is not set +# CONFIG_ECHO is not set +# CONFIG_CXL_BASE is not set +# CONFIG_CXL_AFU_DRIVER_OPS is not set + +# +# SCSI device support +# +CONFIG_SCSI_MOD=y +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_MQ_DEFAULT is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_SAS_ATTRS=y +CONFIG_SCSI_SAS_LIBSAS=y +CONFIG_SCSI_SAS_ATA=y +CONFIG_SCSI_SAS_HOST_SMP=y +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_ISCSI_BOOT_SYSFS is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_CXGB4_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +CONFIG_SCSI_HISI_SAS=y +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_MVUMI is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_SCSI_ESAS2R is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT3SAS is not set +# CONFIG_SCSI_MPT2SAS is not set +# CONFIG_SCSI_SMARTPQI is not set +# CONFIG_SCSI_UFSHCD is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_XEN_SCSI_FRONTEND is not set +# CONFIG_SCSI_SNIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_AM53C974 is not set +# CONFIG_SCSI_WD719X is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set +# CONFIG_SCSI_VIRTIO is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +CONFIG_HAVE_PATA_PLATFORM=y +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y +CONFIG_ATA_ACPI=y +# CONFIG_SATA_ZPODD is not set +CONFIG_SATA_PMP=y + +# +# Controllers with non-SFF native interface +# +CONFIG_SATA_AHCI=y +CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_AHCI_CEVA=y +CONFIG_AHCI_MVEBU=y +# CONFIG_AHCI_SUNXI is not set +# CONFIG_AHCI_TEGRA is not set +CONFIG_AHCI_XGENE=y +CONFIG_AHCI_QORIQ=y +# CONFIG_SATA_AHCI_SEATTLE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_SATA_ACARD_AHCI is not set +CONFIG_SATA_SIL24=y +CONFIG_ATA_SFF=y + +# +# SFF controllers with custom DMA interface +# +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_SX4 is not set +CONFIG_ATA_BMDMA=y + +# +# SATA SFF controllers with BMDMA +# +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_DWC is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_SATA_PROMISE is not set +CONFIG_SATA_RCAR=y +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_SVW is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set + +# +# PATA SFF controllers with BMDMA +# +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_ATP867X is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set +# CONFIG_PATA_SCH is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set + +# +# PIO-only SFF controllers +# +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +CONFIG_PATA_PLATFORM=y +CONFIG_PATA_OF_PLATFORM=y +# CONFIG_PATA_RZ1000 is not set + +# +# Generic fallback / legacy drivers +# +# CONFIG_PATA_ACPI is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_LEGACY is not set +# CONFIG_MD is not set +# CONFIG_TARGET_CORE is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_FIREWIRE_NOSY is not set +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_NET_CORE=y +# CONFIG_BONDING is not set +# CONFIG_DUMMY is not set +# CONFIG_EQUALIZER is not set +# CONFIG_NET_FC is not set +# CONFIG_NET_TEAM is not set +CONFIG_MACVLAN=m +CONFIG_MACVTAP=m +# CONFIG_VXLAN is not set +# CONFIG_MACSEC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +CONFIG_TUN=y +# CONFIG_TUN_VNET_CROSS_LE is not set +CONFIG_VETH=m +CONFIG_VIRTIO_NET=y +# CONFIG_NLMON is not set +# CONFIG_ARCNET is not set + +# +# CAIF transport drivers +# + +# +# Distributed Switch Architecture drivers +# +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_3COM=y +# CONFIG_VORTEX is not set +# CONFIG_TYPHOON is not set +CONFIG_NET_VENDOR_ADAPTEC=y +# CONFIG_ADAPTEC_STARFIRE is not set +CONFIG_NET_VENDOR_AGERE=y +# CONFIG_ET131X is not set +CONFIG_NET_VENDOR_ALLWINNER=y +# CONFIG_SUN4I_EMAC is not set +CONFIG_NET_VENDOR_ALTEON=y +# CONFIG_ACENIC is not set +# CONFIG_ALTERA_TSE is not set +CONFIG_NET_VENDOR_AMAZON=y +CONFIG_NET_VENDOR_AMD=y +# CONFIG_AMD8111_ETH is not set +# CONFIG_PCNET32 is not set +CONFIG_AMD_XGBE=y +CONFIG_NET_XGENE=y +CONFIG_NET_VENDOR_ARC=y +# CONFIG_ARC_EMAC is not set +# CONFIG_EMAC_ROCKCHIP is not set +CONFIG_NET_VENDOR_ATHEROS=y +# CONFIG_ATL2 is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_ALX is not set +# CONFIG_NET_VENDOR_AURORA is not set +CONFIG_NET_CADENCE=y +CONFIG_MACB=y +CONFIG_NET_VENDOR_BROADCOM=y +# CONFIG_B44 is not set +# CONFIG_BCMGENET is not set +# CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2X is not set +CONFIG_BGMAC=y +CONFIG_BGMAC_PLATFORM=y +# CONFIG_SYSTEMPORT is not set +# CONFIG_BNXT is not set +CONFIG_NET_VENDOR_BROCADE=y +# CONFIG_BNA is not set +CONFIG_NET_VENDOR_CAVIUM=y +# CONFIG_THUNDER_NIC_PF is not set +# CONFIG_THUNDER_NIC_VF is not set +# CONFIG_THUNDER_NIC_BGX is not set +# CONFIG_THUNDER_NIC_RGX is not set +# CONFIG_LIQUIDIO is not set +CONFIG_NET_VENDOR_CHELSIO=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_CHELSIO_T4 is not set +# CONFIG_CHELSIO_T4VF is not set +CONFIG_NET_VENDOR_CISCO=y +# CONFIG_ENIC is not set +# CONFIG_DNET is not set +CONFIG_NET_VENDOR_DEC=y +# CONFIG_NET_TULIP is not set +CONFIG_NET_VENDOR_DLINK=y +# CONFIG_DL2K is not set +# CONFIG_SUNDANCE is not set +CONFIG_NET_VENDOR_EMULEX=y +# CONFIG_BE2NET is not set +CONFIG_NET_VENDOR_EZCHIP=y +# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set +CONFIG_NET_VENDOR_EXAR=y +# CONFIG_S2IO is not set +# CONFIG_VXGE is not set +CONFIG_NET_VENDOR_FREESCALE=y +# CONFIG_FSL_PQ_MDIO is not set +# CONFIG_FSL_XGMAC_MDIO is not set +# CONFIG_GIANFAR is not set +CONFIG_NET_VENDOR_HISILICON=y +# CONFIG_HIX5HD2_GMAC is not set +# CONFIG_HISI_FEMAC is not set +# CONFIG_HIP04_ETH is not set +CONFIG_HNS_MDIO=y +CONFIG_HNS=y +CONFIG_HNS_DSAF=y +CONFIG_HNS_ENET=y +CONFIG_NET_VENDOR_HP=y +# CONFIG_HP100 is not set +CONFIG_NET_VENDOR_INTEL=y +# CONFIG_E100 is not set +# CONFIG_E1000 is not set +CONFIG_E1000E=y +CONFIG_IGB=y +CONFIG_IGB_HWMON=y +CONFIG_IGBVF=y +# CONFIG_IXGB is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGBEVF is not set +# CONFIG_I40E is not set +# CONFIG_I40EVF is not set +# CONFIG_FM10K is not set +CONFIG_NET_VENDOR_I825XX=y +# CONFIG_JME is not set +CONFIG_NET_VENDOR_MARVELL=y +# CONFIG_MVMDIO is not set +# CONFIG_MVNETA_BM is not set +# CONFIG_PXA168_ETH is not set +# CONFIG_SKGE is not set +CONFIG_SKY2=y +# CONFIG_SKY2_DEBUG is not set +# CONFIG_NET_VENDOR_MEDIATEK is not set +CONFIG_NET_VENDOR_MELLANOX=y +# CONFIG_MLX4_EN is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_MLX5_CORE is not set +# CONFIG_MLXSW_CORE is not set +CONFIG_NET_VENDOR_MICREL=y +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_KSZ884X_PCI is not set +CONFIG_NET_VENDOR_MICROCHIP=y +# CONFIG_ENC28J60 is not set +# CONFIG_ENCX24J600 is not set +CONFIG_NET_VENDOR_MYRI=y +# CONFIG_MYRI10GE is not set +# CONFIG_FEALNX is not set +CONFIG_NET_VENDOR_NATSEMI=y +# CONFIG_NATSEMI is not set +# CONFIG_NS83820 is not set +CONFIG_NET_VENDOR_NETRONOME=y +# CONFIG_NFP_NETVF is not set +CONFIG_NET_VENDOR_8390=y +# CONFIG_NE2K_PCI is not set +CONFIG_NET_VENDOR_NVIDIA=y +# CONFIG_FORCEDETH is not set +CONFIG_NET_VENDOR_OKI=y +# CONFIG_ETHOC is not set +CONFIG_NET_PACKET_ENGINE=y +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_NET_VENDOR_QLOGIC=y +# CONFIG_QLA3XXX is not set +# CONFIG_QLCNIC is not set +# CONFIG_QLGE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_QED is not set +CONFIG_NET_VENDOR_QUALCOMM=y +# CONFIG_QCA7000 is not set +# CONFIG_QCOM_EMAC is not set +CONFIG_NET_VENDOR_REALTEK=y +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_R8169 is not set +CONFIG_NET_VENDOR_RENESAS=y +# CONFIG_SH_ETH is not set +CONFIG_RAVB=y +CONFIG_NET_VENDOR_RDC=y +# CONFIG_R6040 is not set +CONFIG_NET_VENDOR_ROCKER=y +CONFIG_NET_VENDOR_SAMSUNG=y +# CONFIG_SXGBE_ETH is not set +CONFIG_NET_VENDOR_SEEQ=y +CONFIG_NET_VENDOR_SILAN=y +# CONFIG_SC92031 is not set +CONFIG_NET_VENDOR_SIS=y +# CONFIG_SIS900 is not set +# CONFIG_SIS190 is not set +# CONFIG_SFC is not set +CONFIG_NET_VENDOR_SMSC=y +CONFIG_SMC91X=y +# CONFIG_EPIC100 is not set +CONFIG_SMSC911X=y +# CONFIG_SMSC911X_ARCH_HOOKS is not set +# CONFIG_SMSC9420 is not set +CONFIG_NET_VENDOR_STMICRO=y +CONFIG_STMMAC_ETH=m +CONFIG_STMMAC_PLATFORM=m +CONFIG_DWMAC_GENERIC=m +CONFIG_DWMAC_IPQ806X=m +CONFIG_DWMAC_MESON=m +CONFIG_DWMAC_ROCKCHIP=m +CONFIG_DWMAC_SUNXI=m +# CONFIG_STMMAC_PCI is not set +CONFIG_NET_VENDOR_SUN=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NIU is not set +CONFIG_NET_VENDOR_SYNOPSYS=y +# CONFIG_SYNOPSYS_DWC_ETH_QOS is not set +CONFIG_NET_VENDOR_TEHUTI=y +# CONFIG_TEHUTI is not set +CONFIG_NET_VENDOR_TI=y +# CONFIG_TI_CPSW_ALE is not set +# CONFIG_TLAN is not set +CONFIG_NET_VENDOR_VIA=y +# CONFIG_VIA_RHINE is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_NET_VENDOR_WIZNET=y +# CONFIG_WIZNET_W5100 is not set +# CONFIG_WIZNET_W5300 is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_NET_SB1000 is not set +CONFIG_PHYLIB=y +CONFIG_SWPHY=y + +# +# MDIO bus device drivers +# +# CONFIG_MDIO_BCM_IPROC is not set +# CONFIG_MDIO_BCM_UNIMAC is not set +CONFIG_MDIO_BITBANG=y +CONFIG_MDIO_BUS_MUX=y +CONFIG_MDIO_BUS_MUX_BCM_IPROC=y +# CONFIG_MDIO_BUS_MUX_GPIO is not set +# CONFIG_MDIO_BUS_MUX_MMIOREG is not set +# CONFIG_MDIO_GPIO is not set +# CONFIG_MDIO_HISI_FEMAC is not set +# CONFIG_MDIO_OCTEON is not set +# CONFIG_MDIO_SUN4I is not set +# CONFIG_MDIO_THUNDER is not set +CONFIG_MDIO_XGENE=y + +# +# MII PHY device drivers +# +# CONFIG_AMD_PHY is not set +# CONFIG_AQUANTIA_PHY is not set +# CONFIG_AT803X_PHY is not set +# CONFIG_BCM7XXX_PHY is not set +# CONFIG_BCM87XX_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_DP83848_PHY is not set +# CONFIG_DP83867_PHY is not set +CONFIG_FIXED_PHY=y +# CONFIG_ICPLUS_PHY is not set +# CONFIG_INTEL_XWAY_PHY is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_MARVELL_PHY is not set +CONFIG_MICREL_PHY=y +# CONFIG_MICROCHIP_PHY is not set +# CONFIG_MICROSEMI_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_QSEMI_PHY is not set +CONFIG_REALTEK_PHY=m +# CONFIG_SMSC_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_TERANETICS_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_XILINX_GMII2RGMII is not set +# CONFIG_MICREL_KS8995MA is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +CONFIG_USB_NET_DRIVERS=y +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_RTL8152=m +# CONFIG_USB_LAN78XX is not set +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_AX88179_178A=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_CDC_EEM is not set +CONFIG_USB_NET_CDC_NCM=m +# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set +# CONFIG_USB_NET_CDC_MBIM is not set +CONFIG_USB_NET_DM9601=m +# CONFIG_USB_NET_SR9700 is not set +CONFIG_USB_NET_SR9800=m +CONFIG_USB_NET_SMSC75XX=m +CONFIG_USB_NET_SMSC95XX=m +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +# CONFIG_USB_NET_RNDIS_HOST is not set +CONFIG_USB_NET_CDC_SUBSET_ENABLE=m +CONFIG_USB_NET_CDC_SUBSET=m +# CONFIG_USB_ALI_M5632 is not set +# CONFIG_USB_AN2720 is not set +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +# CONFIG_USB_EPSON2888 is not set +# CONFIG_USB_KC2190 is not set +CONFIG_USB_NET_ZAURUS=m +# CONFIG_USB_NET_CX82310_ETH is not set +# CONFIG_USB_NET_KALMIA is not set +# CONFIG_USB_NET_QMI_WWAN is not set +# CONFIG_USB_HSO is not set +# CONFIG_USB_NET_INT51X1 is not set +# CONFIG_USB_IPHETH is not set +# CONFIG_USB_SIERRA_NET is not set +# CONFIG_USB_VL600 is not set +# CONFIG_USB_NET_CH9200 is not set +CONFIG_WLAN=y +CONFIG_WLAN_VENDOR_ADMTEK=y +# CONFIG_ADM8211 is not set +CONFIG_WLAN_VENDOR_ATH=y +# CONFIG_ATH_DEBUG is not set +# CONFIG_ATH5K is not set +# CONFIG_ATH5K_PCI is not set +# CONFIG_ATH9K is not set +# CONFIG_ATH9K_HTC is not set +# CONFIG_CARL9170 is not set +# CONFIG_ATH6KL is not set +# CONFIG_AR5523 is not set +# CONFIG_WIL6210 is not set +# CONFIG_ATH10K is not set +# CONFIG_WCN36XX is not set +CONFIG_WLAN_VENDOR_ATMEL=y +# CONFIG_ATMEL is not set +# CONFIG_AT76C50X_USB is not set +CONFIG_WLAN_VENDOR_BROADCOM=y +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_BRCMSMAC is not set +# CONFIG_BRCMFMAC is not set +CONFIG_WLAN_VENDOR_CISCO=y +CONFIG_WLAN_VENDOR_INTEL=y +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_IWL4965 is not set +# CONFIG_IWL3945 is not set +# CONFIG_IWLWIFI is not set +CONFIG_WLAN_VENDOR_INTERSIL=y +# CONFIG_HOSTAP is not set +# CONFIG_HERMES is not set +# CONFIG_P54_COMMON is not set +# CONFIG_PRISM54 is not set +CONFIG_WLAN_VENDOR_MARVELL=y +# CONFIG_LIBERTAS is not set +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_MWIFIEX is not set +# CONFIG_MWL8K is not set +CONFIG_WLAN_VENDOR_MEDIATEK=y +# CONFIG_MT7601U is not set +CONFIG_WLAN_VENDOR_RALINK=y +# CONFIG_RT2X00 is not set +CONFIG_WLAN_VENDOR_REALTEK=y +# CONFIG_RTL8180 is not set +# CONFIG_RTL8187 is not set +CONFIG_RTL_CARDS=m +# CONFIG_RTL8192CE is not set +# CONFIG_RTL8192SE is not set +# CONFIG_RTL8192DE is not set +# CONFIG_RTL8723AE is not set +# CONFIG_RTL8723BE is not set +# CONFIG_RTL8188EE is not set +# CONFIG_RTL8192EE is not set +# CONFIG_RTL8821AE is not set +# CONFIG_RTL8192CU is not set +# CONFIG_RTL8XXXU is not set +CONFIG_WLAN_VENDOR_RSI=y +# CONFIG_RSI_91X is not set +CONFIG_WLAN_VENDOR_ST=y +# CONFIG_CW1200 is not set +CONFIG_WLAN_VENDOR_TI=y +# CONFIG_WL1251 is not set +# CONFIG_WL12XX is not set +CONFIG_WL18XX=m +CONFIG_WLCORE=m +# CONFIG_WLCORE_SPI is not set +CONFIG_WLCORE_SDIO=m +CONFIG_WILINK_PLATFORM_DATA=y +CONFIG_WLAN_VENDOR_ZYDAS=y +# CONFIG_USB_ZD1201 is not set +# CONFIG_ZD1211RW is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +CONFIG_XEN_NETDEV_FRONTEND=y +# CONFIG_XEN_NETDEV_BACKEND is not set +# CONFIG_VMXNET3 is not set +# CONFIG_FUJITSU_ES is not set +# CONFIG_ISDN is not set +# CONFIG_NVM is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_LEDS=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set +# CONFIG_INPUT_MATRIXKMAP is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADC is not set +# CONFIG_KEYBOARD_ADP5588 is not set +# CONFIG_KEYBOARD_ADP5589 is not set +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_QT1070 is not set +# CONFIG_KEYBOARD_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_GPIO_POLLED is not set +# CONFIG_KEYBOARD_TCA6416 is not set +# CONFIG_KEYBOARD_TCA8418 is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_LM8333 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_MCS is not set +# CONFIG_KEYBOARD_MPR121 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_TEGRA is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_SAMSUNG is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_SH_KEYSC is not set +# CONFIG_KEYBOARD_SUN4I_LRADC is not set +# CONFIG_KEYBOARD_OMAP4 is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_CROS_EC is not set +# CONFIG_KEYBOARD_CAP11XX is not set +# CONFIG_KEYBOARD_BCM is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_BYD=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_CYPRESS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +CONFIG_MOUSE_PS2_FOCALTECH=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_CYAPA is not set +# CONFIG_MOUSE_ELAN_I2C is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +# CONFIG_MOUSE_SYNAPTICS_USB is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_AD714X is not set +# CONFIG_INPUT_ATMEL_CAPTOUCH is not set +# CONFIG_INPUT_BMA150 is not set +# CONFIG_INPUT_E3X0_BUTTON is not set +CONFIG_INPUT_PM8941_PWRKEY=y +# CONFIG_INPUT_MMA8450 is not set +# CONFIG_INPUT_MPU3050 is not set +# CONFIG_INPUT_GP2A is not set +# CONFIG_INPUT_GPIO_BEEPER is not set +# CONFIG_INPUT_GPIO_TILT_POLLED is not set +# CONFIG_INPUT_GPIO_DECODER is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_KXTJ9 is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +# CONFIG_INPUT_REGULATOR_HAPTIC is not set +# CONFIG_INPUT_UINPUT is not set +# CONFIG_INPUT_PCF8574 is not set +# CONFIG_INPUT_PWM_BEEPER is not set +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set +# CONFIG_INPUT_ADXL34X is not set +# CONFIG_INPUT_IMS_PCU is not set +# CONFIG_INPUT_CMA3000 is not set +CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y +# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set +# CONFIG_INPUT_DRV260X_HAPTICS is not set +# CONFIG_INPUT_DRV2665_HAPTICS is not set +# CONFIG_INPUT_DRV2667_HAPTICS is not set +CONFIG_INPUT_HISI_POWERKEY=y +# CONFIG_RMI4_CORE is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_AMBAKMI=y +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set +# CONFIG_SERIO_PS2MULT is not set +# CONFIG_SERIO_ARC_PS2 is not set +# CONFIG_SERIO_APBPS2 is not set +# CONFIG_SERIO_SUN4I_PS2 is not set +# CONFIG_USERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_TTY=y +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_VT_CONSOLE_SLEEP=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set +# CONFIG_N_GSM is not set +# CONFIG_TRACE_SINK is not set +CONFIG_DEVMEM=y +CONFIG_DEVKMEM=y + +# +# Serial drivers +# +CONFIG_SERIAL_EARLYCON=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y +CONFIG_SERIAL_8250_PNP=y +# CONFIG_SERIAL_8250_FINTEK is not set +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DMA=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_FSL=y +CONFIG_SERIAL_8250_DW=y +# CONFIG_SERIAL_8250_RT288X is not set +CONFIG_SERIAL_8250_MT6577=y +CONFIG_SERIAL_8250_UNIPHIER=y +# CONFIG_SERIAL_8250_MOXA is not set +CONFIG_SERIAL_OF_PLATFORM=y + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_AMBA_PL010 is not set +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set +CONFIG_SERIAL_MESON=y +CONFIG_SERIAL_MESON_CONSOLE=y +CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_UARTS_4=y +CONFIG_SERIAL_SAMSUNG_UARTS=4 +CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_SERIAL_TEGRA=y +# CONFIG_SERIAL_MAX3100 is not set +# CONFIG_SERIAL_MAX310X is not set +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=11 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +# CONFIG_SERIAL_SH_SCI_EARLYCON is not set +# CONFIG_SERIAL_SH_SCI_DMA is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_MSM=y +CONFIG_SERIAL_MSM_CONSOLE=y +# CONFIG_SERIAL_SCCNXP is not set +# CONFIG_SERIAL_SC16IS7XX is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set +# CONFIG_SERIAL_IFX6X60 is not set +CONFIG_SERIAL_XILINX_PS_UART=y +CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y +# CONFIG_SERIAL_ARC is not set +# CONFIG_SERIAL_RP2 is not set +# CONFIG_SERIAL_FSL_LPUART is not set +# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set +# CONFIG_SERIAL_SPRD is not set +CONFIG_SERIAL_MVEBU_UART=y +CONFIG_SERIAL_MVEBU_CONSOLE=y +CONFIG_SERIAL_MCTRL_GPIO=y +CONFIG_HVC_DRIVER=y +CONFIG_HVC_IRQ=y +CONFIG_HVC_XEN=y +CONFIG_HVC_XEN_FRONTEND=y +# CONFIG_HVC_DCC is not set +CONFIG_VIRTIO_CONSOLE=y +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +CONFIG_HW_RANDOM_IPROC_RNG200=m +# CONFIG_HW_RANDOM_VIRTIO is not set +CONFIG_HW_RANDOM_EXYNOS=m +CONFIG_HW_RANDOM_HISI=m +CONFIG_HW_RANDOM_MSM=m +CONFIG_HW_RANDOM_XGENE=m +CONFIG_HW_RANDOM_MESON=m +CONFIG_HW_RANDOM_CAVIUM=m +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# PCMCIA character devices +# +# CONFIG_RAW_DRIVER is not set +# CONFIG_HPET is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_XILLYBUS is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_ACPI_I2C_OPREGION=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MUX=y + +# +# Multiplexer I2C Chip support +# +# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set +# CONFIG_I2C_MUX_GPIO is not set +# CONFIG_I2C_MUX_PCA9541 is not set +CONFIG_I2C_MUX_PCA954x=y +# CONFIG_I2C_MUX_PINCTRL is not set +# CONFIG_I2C_MUX_REG is not set +# CONFIG_I2C_DEMUX_PINCTRL is not set +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_HIX5HD2 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# ACPI drivers +# +# CONFIG_I2C_SCMI is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_BCM_IPROC=y +# CONFIG_I2C_CADENCE is not set +# CONFIG_I2C_CBUS_GPIO is not set +CONFIG_I2C_DESIGNWARE_CORE=y +CONFIG_I2C_DESIGNWARE_PLATFORM=y +# CONFIG_I2C_DESIGNWARE_PCI is not set +# CONFIG_I2C_EMEV2 is not set +CONFIG_I2C_EXYNOS5=y +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_IMX=y +CONFIG_I2C_MESON=y +# CONFIG_I2C_MT65XX is not set +CONFIG_I2C_MV64XXX=y +# CONFIG_I2C_NOMADIK is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_PXA_PCI is not set +CONFIG_I2C_QUP=y +# CONFIG_I2C_RIIC is not set +# CONFIG_I2C_RK3X is not set +CONFIG_I2C_SH_MOBILE=y +# CONFIG_I2C_SIMTEC is not set +CONFIG_I2C_TEGRA=y +# CONFIG_I2C_UNIPHIER is not set +CONFIG_I2C_UNIPHIER_F=y +# CONFIG_I2C_VERSATILE is not set +# CONFIG_I2C_THUNDERX is not set +# CONFIG_I2C_XILINX is not set +# CONFIG_I2C_XLP9XX is not set +CONFIG_I2C_RCAR=y + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_DIOLAN_U2C is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_ROBOTFUZZ_OSIF is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +CONFIG_I2C_CROS_EC_TUNNEL=y +# CONFIG_I2C_XGENE_SLIMPRO is not set +# CONFIG_I2C_STUB is not set +CONFIG_I2C_SLAVE=y +# CONFIG_I2C_SLAVE_EEPROM is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_ALTERA is not set +# CONFIG_SPI_AXI_SPI_ENGINE is not set +CONFIG_SPI_BCM_QSPI=y +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_CADENCE is not set +# CONFIG_SPI_DESIGNWARE is not set +# CONFIG_SPI_GPIO is not set +# CONFIG_SPI_FSL_SPI is not set +# CONFIG_SPI_FSL_DSPI is not set +CONFIG_SPI_MESON_SPIFC=m +# CONFIG_SPI_MT65XX is not set +# CONFIG_SPI_OC_TINY is not set +CONFIG_SPI_ORION=y +CONFIG_SPI_PL022=y +# CONFIG_SPI_PXA2XX is not set +# CONFIG_SPI_PXA2XX_PCI is not set +# CONFIG_SPI_ROCKCHIP is not set +# CONFIG_SPI_RSPI is not set +CONFIG_SPI_QUP=y +CONFIG_SPI_S3C64XX=y +# CONFIG_SPI_SC18IS602 is not set +CONFIG_SPI_SH_MSIOF=y +# CONFIG_SPI_SH_MSIOF_TRANSFER_SYNC_DEBUG is not set +# CONFIG_SPI_SH_HSPI is not set +# CONFIG_SPI_SUN4I is not set +# CONFIG_SPI_SUN6I is not set +# CONFIG_SPI_TEGRA114 is not set +# CONFIG_SPI_TEGRA20_SFLASH is not set +# CONFIG_SPI_TEGRA20_SLINK is not set +# CONFIG_SPI_THUNDERX is not set +# CONFIG_SPI_XCOMM is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_XLP is not set +# CONFIG_SPI_ZYNQMP_GQSPI is not set + +# +# SPI Protocol Masters +# +CONFIG_SPI_SPIDEV=y +# CONFIG_SPI_LOOPBACK_TEST is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_SPMI=y +CONFIG_SPMI_MSM_PMIC_ARB=y +# CONFIG_HSI is not set + +# +# PPS support +# +CONFIG_PPS=y +# CONFIG_PPS_DEBUG is not set + +# +# PPS clients support +# +# CONFIG_PPS_CLIENT_KTIMER is not set +# CONFIG_PPS_CLIENT_LDISC is not set +# CONFIG_PPS_CLIENT_GPIO is not set + +# +# PPS generators support +# + +# +# PTP clock support +# +CONFIG_PTP_1588_CLOCK=y + +# +# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. +# +CONFIG_PINCTRL=y + +# +# Pin controllers +# +CONFIG_PINMUX=y +CONFIG_PINCONF=y +CONFIG_GENERIC_PINCONF=y +# CONFIG_DEBUG_PINCTRL is not set +# CONFIG_PINCTRL_AMD is not set +CONFIG_PINCTRL_MESON=y +CONFIG_PINCTRL_ROCKCHIP=y +CONFIG_PINCTRL_SINGLE=y +CONFIG_PINCTRL_MAX77620=y +CONFIG_PINCTRL_IPROC_GPIO=y +CONFIG_PINCTRL_NS2_MUX=y +# CONFIG_PINCTRL_BERLIN_BG2 is not set +# CONFIG_PINCTRL_BERLIN_BG2CD is not set +# CONFIG_PINCTRL_BERLIN_BG2Q is not set +# CONFIG_PINCTRL_BERLIN_BG4CT is not set +# CONFIG_PINCTRL_BAYTRAIL is not set +# CONFIG_PINCTRL_CHERRYVIEW is not set +# CONFIG_PINCTRL_BROXTON is not set +# CONFIG_PINCTRL_SUNRISEPOINT is not set +CONFIG_PINCTRL_MSM=y +# CONFIG_PINCTRL_APQ8064 is not set +# CONFIG_PINCTRL_APQ8084 is not set +# CONFIG_PINCTRL_IPQ4019 is not set +# CONFIG_PINCTRL_IPQ8064 is not set +# CONFIG_PINCTRL_MSM8660 is not set +# CONFIG_PINCTRL_MSM8960 is not set +# CONFIG_PINCTRL_MDM9615 is not set +# CONFIG_PINCTRL_MSM8X74 is not set +CONFIG_PINCTRL_MSM8916=y +CONFIG_PINCTRL_MSM8996=y +CONFIG_PINCTRL_QDF2XXX=y +CONFIG_PINCTRL_QCOM_SPMI_PMIC=y +# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set +CONFIG_PINCTRL_SAMSUNG=y +CONFIG_PINCTRL_EXYNOS=y +CONFIG_PINCTRL_SH_PFC=y +CONFIG_PINCTRL_PFC_R8A7795=y +CONFIG_PINCTRL_PFC_R8A7796=y +CONFIG_PINCTRL_SUNXI=y +# CONFIG_PINCTRL_SUN4I_A10 is not set +# CONFIG_PINCTRL_SUN5I_A10S is not set +# CONFIG_PINCTRL_SUN5I_A13 is not set +# CONFIG_PINCTRL_GR8 is not set +# CONFIG_PINCTRL_SUN6I_A31 is not set +# CONFIG_PINCTRL_SUN6I_A31S is not set +# CONFIG_PINCTRL_SUN6I_A31_R is not set +# CONFIG_PINCTRL_SUN7I_A20 is not set +# CONFIG_PINCTRL_SUN8I_A23 is not set +# CONFIG_PINCTRL_SUN8I_A33 is not set +# CONFIG_PINCTRL_SUN8I_A83T is not set +# CONFIG_PINCTRL_SUN8I_A23_R is not set +# CONFIG_PINCTRL_SUN8I_H3 is not set +# CONFIG_PINCTRL_SUN8I_H3_R is not set +# CONFIG_PINCTRL_SUN9I_A80 is not set +# CONFIG_PINCTRL_SUN9I_A80_R is not set +CONFIG_PINCTRL_SUN50I_A64=y +CONFIG_PINCTRL_TEGRA=y +CONFIG_PINCTRL_TEGRA124=y +CONFIG_PINCTRL_TEGRA210=y +CONFIG_PINCTRL_TEGRA_XUSB=y +CONFIG_PINCTRL_UNIPHIER=y +# CONFIG_PINCTRL_UNIPHIER_LD4 is not set +# CONFIG_PINCTRL_UNIPHIER_PRO4 is not set +# CONFIG_PINCTRL_UNIPHIER_SLD8 is not set +# CONFIG_PINCTRL_UNIPHIER_PRO5 is not set +# CONFIG_PINCTRL_UNIPHIER_PXS2 is not set +# CONFIG_PINCTRL_UNIPHIER_LD6B is not set +CONFIG_PINCTRL_UNIPHIER_LD11=y +CONFIG_PINCTRL_UNIPHIER_LD20=y +CONFIG_PINCTRL_MTK=y +# CONFIG_PINCTRL_MT2701 is not set +# CONFIG_PINCTRL_MT7623 is not set +# CONFIG_PINCTRL_MT8135 is not set +# CONFIG_PINCTRL_MT8127 is not set +CONFIG_PINCTRL_MT8173=y +# CONFIG_PINCTRL_MT6397 is not set +CONFIG_GPIOLIB=y +CONFIG_OF_GPIO=y +CONFIG_GPIO_ACPI=y +CONFIG_GPIOLIB_IRQCHIP=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_GENERIC=y + +# +# Memory mapped GPIO drivers +# +# CONFIG_GPIO_74XX_MMIO is not set +# CONFIG_GPIO_ALTERA is not set +# CONFIG_GPIO_AMDPT is not set +CONFIG_GPIO_DWAPB=y +CONFIG_GPIO_GENERIC_PLATFORM=y +# CONFIG_GPIO_GRGPIO is not set +# CONFIG_GPIO_MOCKUP is not set +# CONFIG_GPIO_MPC8XXX is not set +CONFIG_GPIO_PL061=y +CONFIG_GPIO_RCAR=y +# CONFIG_GPIO_SYSCON is not set +CONFIG_GPIO_TEGRA=y +# CONFIG_GPIO_VX855 is not set +CONFIG_GPIO_XGENE=y +# CONFIG_GPIO_XGENE_SB is not set +# CONFIG_GPIO_XILINX is not set +# CONFIG_GPIO_XLP is not set +# CONFIG_GPIO_ZYNQ is not set +# CONFIG_GPIO_ZX is not set + +# +# I2C GPIO expanders +# +# CONFIG_GPIO_ADP5588 is not set +# CONFIG_GPIO_ADNP is not set +# CONFIG_GPIO_MAX7300 is not set +# CONFIG_GPIO_MAX732X is not set +CONFIG_GPIO_PCA953X=y +CONFIG_GPIO_PCA953X_IRQ=y +# CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_SX150X is not set +# CONFIG_GPIO_TPIC2810 is not set +# CONFIG_GPIO_TS4900 is not set + +# +# MFD GPIO expanders +# +CONFIG_GPIO_MAX77620=y + +# +# PCI GPIO expanders +# +# CONFIG_GPIO_AMD8111 is not set +# CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_ML_IOH is not set +# CONFIG_GPIO_RDC321X is not set + +# +# SPI GPIO expanders +# +# CONFIG_GPIO_74X164 is not set +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MC33880 is not set +# CONFIG_GPIO_PISOSR is not set + +# +# SPI or I2C GPIO expanders +# +# CONFIG_GPIO_MCP23S08 is not set + +# +# USB GPIO expanders +# +# CONFIG_W1 is not set +CONFIG_POWER_AVS=y +# CONFIG_ROCKCHIP_IODOMAIN is not set +CONFIG_POWER_RESET=y +# CONFIG_POWER_RESET_GPIO is not set +# CONFIG_POWER_RESET_GPIO_RESTART is not set +# CONFIG_POWER_RESET_HISI is not set +CONFIG_POWER_RESET_MSM=y +# CONFIG_POWER_RESET_LTC2952 is not set +# CONFIG_POWER_RESET_RESTART is not set +CONFIG_POWER_RESET_VEXPRESS=y +CONFIG_POWER_RESET_XGENE=y +CONFIG_POWER_RESET_SYSCON=y +# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set +# CONFIG_POWER_RESET_ZX is not set +# CONFIG_SYSCON_REBOOT_MODE is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_GENERIC_ADC_BATTERY is not set +# CONFIG_TEST_POWER is not set +# CONFIG_BATTERY_DS2780 is not set +# CONFIG_BATTERY_DS2781 is not set +# CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_SBS is not set +CONFIG_BATTERY_BQ27XXX=y +CONFIG_BATTERY_BQ27XXX_I2C=y +# CONFIG_BATTERY_MAX17040 is not set +# CONFIG_BATTERY_MAX17042 is not set +# CONFIG_CHARGER_ISP1704 is not set +# CONFIG_CHARGER_MAX8903 is not set +# CONFIG_CHARGER_LP8727 is not set +# CONFIG_CHARGER_GPIO is not set +# CONFIG_CHARGER_MANAGER is not set +# CONFIG_CHARGER_QCOM_SMBB is not set +# CONFIG_CHARGER_BQ2415X is not set +# CONFIG_CHARGER_BQ24190 is not set +# CONFIG_CHARGER_BQ24257 is not set +# CONFIG_CHARGER_BQ24735 is not set +# CONFIG_CHARGER_BQ25890 is not set +# CONFIG_CHARGER_SMB347 is not set +# CONFIG_BATTERY_GAUGE_LTC2941 is not set +# CONFIG_CHARGER_RT9455 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +# CONFIG_SENSORS_AD7314 is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7310 is not set +# CONFIG_SENSORS_ADT7410 is not set +# CONFIG_SENSORS_ADT7411 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set +CONFIG_SENSORS_ARM_SCPI=y +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS620 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_FTSTEUTATES is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_G762 is not set +# CONFIG_SENSORS_GPIO_FAN is not set +# CONFIG_SENSORS_HIH6130 is not set +# CONFIG_SENSORS_IIO_HWMON is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_JC42 is not set +# CONFIG_SENSORS_POWR1220 is not set +# CONFIG_SENSORS_LINEAGE is not set +# CONFIG_SENSORS_LTC2945 is not set +# CONFIG_SENSORS_LTC2990 is not set +# CONFIG_SENSORS_LTC4151 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4222 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LTC4260 is not set +# CONFIG_SENSORS_LTC4261 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX16065 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX1668 is not set +# CONFIG_SENSORS_MAX197 is not set +# CONFIG_SENSORS_MAX31722 is not set +# CONFIG_SENSORS_MAX6639 is not set +# CONFIG_SENSORS_MAX6642 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_MAX6697 is not set +# CONFIG_SENSORS_MAX31790 is not set +# CONFIG_SENSORS_MCP3021 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM73 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +CONFIG_SENSORS_LM90=m +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LM95234 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_LM95245 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_NTC_THERMISTOR is not set +# CONFIG_SENSORS_NCT6683 is not set +# CONFIG_SENSORS_NCT6775 is not set +# CONFIG_SENSORS_NCT7802 is not set +# CONFIG_SENSORS_NCT7904 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_PMBUS is not set +# CONFIG_SENSORS_PWM_FAN is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_SHT21 is not set +# CONFIG_SENSORS_SHT3x is not set +# CONFIG_SENSORS_SHTC1 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_EMC1403 is not set +# CONFIG_SENSORS_EMC2103 is not set +# CONFIG_SENSORS_EMC6W201 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SCH56XX_COMMON is not set +# CONFIG_SENSORS_SCH5627 is not set +# CONFIG_SENSORS_SCH5636 is not set +# CONFIG_SENSORS_SMM665 is not set +# CONFIG_SENSORS_ADC128D818 is not set +# CONFIG_SENSORS_ADS1015 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_ADS7871 is not set +# CONFIG_SENSORS_AMC6821 is not set +# CONFIG_SENSORS_INA209 is not set +CONFIG_SENSORS_INA2XX=m +# CONFIG_SENSORS_INA3221 is not set +# CONFIG_SENSORS_TC74 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP102 is not set +# CONFIG_SENSORS_TMP103 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set +# CONFIG_SENSORS_VEXPRESS is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83795 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set + +# +# ACPI drivers +# +# CONFIG_SENSORS_ACPI_POWER is not set +CONFIG_THERMAL=y +CONFIG_THERMAL_HWMON=y +CONFIG_THERMAL_OF=y +# CONFIG_THERMAL_WRITABLE_TRIPS is not set +# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set +# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set +# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set +CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR=y +# CONFIG_THERMAL_GOV_FAIR_SHARE is not set +# CONFIG_THERMAL_GOV_STEP_WISE is not set +# CONFIG_THERMAL_GOV_BANG_BANG is not set +# CONFIG_THERMAL_GOV_USER_SPACE is not set +CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y +CONFIG_CPU_THERMAL=y +# CONFIG_CLOCK_THERMAL is not set +CONFIG_THERMAL_EMULATION=y +# CONFIG_HISI_THERMAL is not set +# CONFIG_MAX77620_THERMAL is not set +# CONFIG_QORIQ_THERMAL is not set +# CONFIG_ROCKCHIP_THERMAL is not set +# CONFIG_RCAR_THERMAL is not set +CONFIG_RCAR_GEN3_THERMAL=y +# CONFIG_ARMADA_THERMAL is not set + +# +# ACPI INT340X thermal drivers +# +CONFIG_MTK_THERMAL=y + +# +# Samsung thermal drivers +# +CONFIG_EXYNOS_THERMAL=y + +# +# NVIDIA Tegra thermal drivers +# +# CONFIG_TEGRA_SOCTHERM is not set +# CONFIG_QCOM_SPMI_TEMP_ALARM is not set +# CONFIG_GENERIC_ADC_THERMAL is not set + +# +# Qualcomm thermal drivers +# +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_CORE=y +# CONFIG_WATCHDOG_NOWAYOUT is not set +# CONFIG_WATCHDOG_SYSFS is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_GPIO_WATCHDOG is not set +# CONFIG_WDAT_WDT is not set +# CONFIG_XILINX_WATCHDOG is not set +# CONFIG_ZIIRAVE_WATCHDOG is not set +# CONFIG_ARM_SP805_WATCHDOG is not set +# CONFIG_ARM_SBSA_WATCHDOG is not set +# CONFIG_CADENCE_WATCHDOG is not set +CONFIG_HAVE_S3C2410_WATCHDOG=y +CONFIG_S3C2410_WATCHDOG=y +# CONFIG_DW_WATCHDOG is not set +# CONFIG_SUNXI_WATCHDOG is not set +# CONFIG_MAX63XX_WATCHDOG is not set +# CONFIG_MAX77620_WATCHDOG is not set +# CONFIG_IMX2_WDT is not set +# CONFIG_TEGRA_WATCHDOG is not set +# CONFIG_QCOM_WDT is not set +CONFIG_MESON_GXBB_WATCHDOG=m +CONFIG_MESON_WATCHDOG=m +# CONFIG_MEDIATEK_WATCHDOG is not set +CONFIG_RENESAS_WDT=y +# CONFIG_ALIM7101_WDT is not set +# CONFIG_I6300ESB_WDT is not set +# CONFIG_MEN_A21_WDT is not set +# CONFIG_XEN_WDT is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Watchdog Pretimeout Governors +# +# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set +CONFIG_BCMA_POSSIBLE=y + +# +# Broadcom specific AMBA +# +# CONFIG_BCMA is not set + +# +# Multifunction device drivers +# +CONFIG_MFD_CORE=y +# CONFIG_MFD_ACT8945A is not set +# CONFIG_MFD_AS3711 is not set +# CONFIG_MFD_AS3722 is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_AAT2870_CORE is not set +# CONFIG_MFD_ATMEL_FLEXCOM is not set +# CONFIG_MFD_ATMEL_HLCDC is not set +# CONFIG_MFD_BCM590XX is not set +# CONFIG_MFD_AXP20X_I2C is not set +CONFIG_MFD_CROS_EC=y +CONFIG_MFD_CROS_EC_I2C=y +# CONFIG_MFD_CROS_EC_SPI is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_DA9052_SPI is not set +# CONFIG_MFD_DA9052_I2C is not set +# CONFIG_MFD_DA9055 is not set +# CONFIG_MFD_DA9062 is not set +# CONFIG_MFD_DA9063 is not set +# CONFIG_MFD_DA9150 is not set +# CONFIG_MFD_DLN2 is not set +# CONFIG_MFD_EXYNOS_LPASS is not set +# CONFIG_MFD_MC13XXX_SPI is not set +# CONFIG_MFD_MC13XXX_I2C is not set +# CONFIG_MFD_HI6421_PMIC is not set +CONFIG_MFD_HI655X_PMIC=y +# CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set +# CONFIG_LPC_ICH is not set +# CONFIG_LPC_SCH is not set +# CONFIG_INTEL_SOC_PMIC is not set +# CONFIG_MFD_JANZ_CMODIO is not set +# CONFIG_MFD_KEMPLD is not set +# CONFIG_MFD_88PM800 is not set +# CONFIG_MFD_88PM805 is not set +# CONFIG_MFD_88PM860X is not set +# CONFIG_MFD_MAX14577 is not set +CONFIG_MFD_MAX77620=y +# CONFIG_MFD_MAX77686 is not set +# CONFIG_MFD_MAX77693 is not set +# CONFIG_MFD_MAX77843 is not set +# CONFIG_MFD_MAX8907 is not set +# CONFIG_MFD_MAX8925 is not set +# CONFIG_MFD_MAX8997 is not set +# CONFIG_MFD_MAX8998 is not set +# CONFIG_MFD_MT6397 is not set +# CONFIG_MFD_MENF21BMC is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_MFD_VIPERBOARD is not set +# CONFIG_MFD_RETU is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_QCOM_RPM is not set +CONFIG_MFD_SPMI_PMIC=y +# CONFIG_MFD_RDC321X is not set +# CONFIG_MFD_RTSX_PCI is not set +# CONFIG_MFD_RT5033 is not set +# CONFIG_MFD_RTSX_USB is not set +# CONFIG_MFD_RC5T583 is not set +# CONFIG_MFD_RK808 is not set +# CONFIG_MFD_RN5T618 is not set +CONFIG_MFD_SEC_CORE=y +# CONFIG_MFD_SI476X_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SKY81452 is not set +# CONFIG_MFD_SMSC is not set +# CONFIG_ABX500_CORE is not set +# CONFIG_MFD_STMPE is not set +# CONFIG_MFD_SUN6I_PRCM is not set +CONFIG_MFD_SYSCON=y +# CONFIG_MFD_TI_AM335X_TSCADC is not set +# CONFIG_MFD_LP3943 is not set +# CONFIG_MFD_LP8788 is not set +# CONFIG_MFD_PALMAS is not set +# CONFIG_TPS6105X is not set +# CONFIG_TPS65010 is not set +# CONFIG_TPS6507X is not set +# CONFIG_MFD_TPS65086 is not set +# CONFIG_MFD_TPS65090 is not set +# CONFIG_MFD_TPS65217 is not set +# CONFIG_MFD_TI_LP873X is not set +# CONFIG_MFD_TPS65218 is not set +# CONFIG_MFD_TPS6586X is not set +# CONFIG_MFD_TPS65910 is not set +# CONFIG_MFD_TPS65912_I2C is not set +# CONFIG_MFD_TPS65912_SPI is not set +# CONFIG_MFD_TPS80031 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_TWL6040_CORE is not set +# CONFIG_MFD_WL1273_CORE is not set +# CONFIG_MFD_LM3533 is not set +# CONFIG_MFD_TC3589X is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_VX855 is not set +# CONFIG_MFD_ARIZONA_I2C is not set +# CONFIG_MFD_ARIZONA_SPI is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X_I2C is not set +# CONFIG_MFD_WM831X_SPI is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set +CONFIG_MFD_VEXPRESS_SYSREG=y +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +CONFIG_REGULATOR_FIXED_VOLTAGE=y +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_ACT8865 is not set +# CONFIG_REGULATOR_AD5398 is not set +# CONFIG_REGULATOR_ANATOP is not set +CONFIG_REGULATOR_BD9571MWV=y +# CONFIG_REGULATOR_DA9210 is not set +# CONFIG_REGULATOR_DA9211 is not set +# CONFIG_REGULATOR_FAN53555 is not set +CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_HI655X=y +# CONFIG_REGULATOR_ISL9305 is not set +# CONFIG_REGULATOR_ISL6271A is not set +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_LP3972 is not set +# CONFIG_REGULATOR_LP872X is not set +# CONFIG_REGULATOR_LP8755 is not set +# CONFIG_REGULATOR_LTC3589 is not set +# CONFIG_REGULATOR_LTC3676 is not set +# CONFIG_REGULATOR_MAX1586 is not set +CONFIG_REGULATOR_MAX77620=y +# CONFIG_REGULATOR_MAX8649 is not set +# CONFIG_REGULATOR_MAX8660 is not set +# CONFIG_REGULATOR_MAX8952 is not set +# CONFIG_REGULATOR_MAX8973 is not set +# CONFIG_REGULATOR_MT6311 is not set +# CONFIG_REGULATOR_PFUZE100 is not set +# CONFIG_REGULATOR_PV88060 is not set +# CONFIG_REGULATOR_PV88080 is not set +# CONFIG_REGULATOR_PV88090 is not set +CONFIG_REGULATOR_PWM=y +CONFIG_REGULATOR_QCOM_SMD_RPM=y +CONFIG_REGULATOR_QCOM_SPMI=y +# CONFIG_REGULATOR_S2MPA01 is not set +CONFIG_REGULATOR_S2MPS11=y +# CONFIG_REGULATOR_S5M8767 is not set +# CONFIG_REGULATOR_TPS51632 is not set +# CONFIG_REGULATOR_TPS62360 is not set +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set +# CONFIG_REGULATOR_TPS6524X is not set +# CONFIG_REGULATOR_VEXPRESS is not set +CONFIG_MEDIA_SUPPORT=y + +# +# Multimedia core support +# +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_ANALOG_TV_SUPPORT=y +CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y +# CONFIG_MEDIA_RADIO_SUPPORT is not set +# CONFIG_MEDIA_SDR_SUPPORT is not set +# CONFIG_MEDIA_RC_SUPPORT is not set +CONFIG_MEDIA_CONTROLLER=y +# CONFIG_MEDIA_CONTROLLER_DVB is not set +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_SUBDEV_API=y +CONFIG_VIDEO_V4L2=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +# CONFIG_VIDEO_PCI_SKELETON is not set +CONFIG_VIDEOBUF2_CORE=y +CONFIG_VIDEOBUF2_MEMOPS=y +CONFIG_VIDEOBUF2_DMA_CONTIG=y +CONFIG_VIDEOBUF2_VMALLOC=y +CONFIG_DVB_CORE=y +# CONFIG_DVB_NET is not set +# CONFIG_TTPCI_EEPROM is not set +CONFIG_DVB_MAX_ADAPTERS=8 +# CONFIG_DVB_DYNAMIC_MINORS is not set + +# +# Media drivers +# +# CONFIG_MEDIA_USB_SUPPORT is not set +# CONFIG_MEDIA_PCI_SUPPORT is not set +CONFIG_V4L_PLATFORM_DRIVERS=y +# CONFIG_VIDEO_CAFE_CCIC is not set +# CONFIG_VIDEO_SH_VOU is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS is not set +# CONFIG_VIDEO_XILINX is not set +CONFIG_VIDEO_RCAR_VIN=y +# CONFIG_VIDEO_RCAR_VIN_DEBUG is not set +CONFIG_VIDEO_RCAR_CSI2=y +CONFIG_V4L_MEM2MEM_DRIVERS=y +# CONFIG_VIDEO_MEDIATEK_VPU is not set +# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set +# CONFIG_VIDEO_SAMSUNG_S5P_G2D is not set +# CONFIG_VIDEO_SAMSUNG_S5P_JPEG is not set +# CONFIG_VIDEO_SAMSUNG_S5P_MFC is not set +# CONFIG_VIDEO_SH_VEU is not set +# CONFIG_VIDEO_RENESAS_JPU is not set +CONFIG_VIDEO_RENESAS_FCP=y +CONFIG_VIDEO_RENESAS_VSP1=y +# CONFIG_VIDEO_RENESAS_DEBUG is not set +CONFIG_VIDEO_RENESAS_VSP_ALPHA_BIT_ARGB1555=0 +# CONFIG_V4L_TEST_DRIVERS is not set +# CONFIG_DVB_PLATFORM_DRIVERS is not set + +# +# Supported MMC/SDIO adapters +# +# CONFIG_SMS_SDIO_DRV is not set +# CONFIG_CYPRESS_FIRMWARE is not set + +# +# Media ancillary drivers (tuners, sensors, i2c, spi, frontends) +# +# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set +CONFIG_MEDIA_ATTACH=y + +# +# I2C Encoders, decoders, sensors and other helper chips +# + +# +# Audio decoders, processors and mixers +# +# CONFIG_VIDEO_TVAUDIO is not set +# CONFIG_VIDEO_TDA7432 is not set +# CONFIG_VIDEO_TDA9840 is not set +# CONFIG_VIDEO_TEA6415C is not set +# CONFIG_VIDEO_TEA6420 is not set +# CONFIG_VIDEO_MSP3400 is not set +# CONFIG_VIDEO_CS3308 is not set +# CONFIG_VIDEO_CS5345 is not set +# CONFIG_VIDEO_CS53L32A is not set +# CONFIG_VIDEO_TLV320AIC23B is not set +# CONFIG_VIDEO_UDA1342 is not set +# CONFIG_VIDEO_WM8775 is not set +# CONFIG_VIDEO_WM8739 is not set +# CONFIG_VIDEO_VP27SMPX is not set +# CONFIG_VIDEO_SONY_BTF_MPX is not set + +# +# RDS decoders +# +# CONFIG_VIDEO_SAA6588 is not set + +# +# Video decoders +# +# CONFIG_VIDEO_ADV7180 is not set +# CONFIG_VIDEO_ADV7183 is not set +CONFIG_VIDEO_ADV7482=y +# CONFIG_VIDEO_ADV7604 is not set +# CONFIG_VIDEO_ADV7842 is not set +# CONFIG_VIDEO_BT819 is not set +# CONFIG_VIDEO_BT856 is not set +# CONFIG_VIDEO_BT866 is not set +# CONFIG_VIDEO_KS0127 is not set +# CONFIG_VIDEO_ML86V7667 is not set +# CONFIG_VIDEO_AD5820 is not set +# CONFIG_VIDEO_SAA7110 is not set +# CONFIG_VIDEO_SAA711X is not set +# CONFIG_VIDEO_TC358743 is not set +# CONFIG_VIDEO_TVP514X is not set +# CONFIG_VIDEO_TVP5150 is not set +# CONFIG_VIDEO_TVP7002 is not set +# CONFIG_VIDEO_TW2804 is not set +# CONFIG_VIDEO_TW9903 is not set +# CONFIG_VIDEO_TW9906 is not set +# CONFIG_VIDEO_VPX3220 is not set + +# +# Video and audio decoders +# +# CONFIG_VIDEO_SAA717X is not set +# CONFIG_VIDEO_CX25840 is not set + +# +# Video encoders +# +# CONFIG_VIDEO_SAA7127 is not set +# CONFIG_VIDEO_SAA7185 is not set +# CONFIG_VIDEO_ADV7170 is not set +# CONFIG_VIDEO_ADV7175 is not set +# CONFIG_VIDEO_ADV7343 is not set +# CONFIG_VIDEO_ADV7393 is not set +# CONFIG_VIDEO_ADV7511 is not set +# CONFIG_VIDEO_AD9389B is not set +# CONFIG_VIDEO_AK881X is not set +# CONFIG_VIDEO_THS8200 is not set + +# +# Camera sensor devices +# +# CONFIG_VIDEO_OV2659 is not set +# CONFIG_VIDEO_OV7640 is not set +# CONFIG_VIDEO_OV7670 is not set +# CONFIG_VIDEO_OV9650 is not set +# CONFIG_VIDEO_VS6624 is not set +# CONFIG_VIDEO_MT9M032 is not set +# CONFIG_VIDEO_MT9M111 is not set +# CONFIG_VIDEO_MT9P031 is not set +# CONFIG_VIDEO_MT9T001 is not set +# CONFIG_VIDEO_MT9V011 is not set +# CONFIG_VIDEO_MT9V032 is not set +# CONFIG_VIDEO_SR030PC30 is not set +# CONFIG_VIDEO_NOON010PC30 is not set +# CONFIG_VIDEO_M5MOLS is not set +# CONFIG_VIDEO_S5K6AA is not set +# CONFIG_VIDEO_S5K6A3 is not set +# CONFIG_VIDEO_S5K4ECGX is not set +# CONFIG_VIDEO_S5K5BAF is not set +# CONFIG_VIDEO_SMIAPP is not set +# CONFIG_VIDEO_S5C73M3 is not set + +# +# Flash devices +# +# CONFIG_VIDEO_ADP1653 is not set +# CONFIG_VIDEO_AS3645A is not set +# CONFIG_VIDEO_LM3560 is not set +# CONFIG_VIDEO_LM3646 is not set + +# +# Video improvement chips +# +# CONFIG_VIDEO_UPD64031A is not set +# CONFIG_VIDEO_UPD64083 is not set + +# +# Audio/Video compression chips +# +# CONFIG_VIDEO_SAA6752HS is not set + +# +# Miscellaneous helper chips +# +# CONFIG_VIDEO_THS7303 is not set +# CONFIG_VIDEO_M52790 is not set + +# +# Sensors used on soc_camera driver +# + +# +# SPI helper chips +# +# CONFIG_VIDEO_GS1662 is not set +CONFIG_MEDIA_TUNER=y + +# +# Customize TV tuners +# +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA827X=m +CONFIG_MEDIA_TUNER_TDA18271=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MSI001=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_MT2060=m +CONFIG_MEDIA_TUNER_MT2063=m +CONFIG_MEDIA_TUNER_MT2266=m +CONFIG_MEDIA_TUNER_MT2131=m +CONFIG_MEDIA_TUNER_QT1010=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_XC4000=m +CONFIG_MEDIA_TUNER_MXL5005S=m +CONFIG_MEDIA_TUNER_MXL5007T=m +CONFIG_MEDIA_TUNER_MC44S803=m +CONFIG_MEDIA_TUNER_MAX2165=m +CONFIG_MEDIA_TUNER_TDA18218=m +CONFIG_MEDIA_TUNER_FC0011=m +CONFIG_MEDIA_TUNER_FC0012=m +CONFIG_MEDIA_TUNER_FC0013=m +CONFIG_MEDIA_TUNER_TDA18212=m +CONFIG_MEDIA_TUNER_E4000=m +CONFIG_MEDIA_TUNER_FC2580=m +CONFIG_MEDIA_TUNER_M88RS6000T=m +CONFIG_MEDIA_TUNER_TUA9001=m +CONFIG_MEDIA_TUNER_SI2157=m +CONFIG_MEDIA_TUNER_IT913X=m +CONFIG_MEDIA_TUNER_R820T=m +CONFIG_MEDIA_TUNER_MXL301RF=m +CONFIG_MEDIA_TUNER_QM1D1C0042=m + +# +# Customise DVB Frontends +# + +# +# Multistandard (satellite) frontends +# +CONFIG_DVB_STB0899=m +CONFIG_DVB_STB6100=m +CONFIG_DVB_STV090x=m +CONFIG_DVB_STV6110x=m +CONFIG_DVB_M88DS3103=m + +# +# Multistandard (cable + terrestrial) frontends +# +CONFIG_DVB_DRXK=m +CONFIG_DVB_TDA18271C2DD=m +CONFIG_DVB_SI2165=m +CONFIG_DVB_MN88472=m +CONFIG_DVB_MN88473=m + +# +# DVB-S (satellite) frontends +# +CONFIG_DVB_CX24110=m +CONFIG_DVB_CX24123=m +CONFIG_DVB_MT312=m +CONFIG_DVB_ZL10036=m +CONFIG_DVB_ZL10039=m +CONFIG_DVB_S5H1420=m +CONFIG_DVB_STV0288=m +CONFIG_DVB_STB6000=m +CONFIG_DVB_STV0299=m +CONFIG_DVB_STV6110=m +CONFIG_DVB_STV0900=m +CONFIG_DVB_TDA8083=m +CONFIG_DVB_TDA10086=m +CONFIG_DVB_TDA8261=m +CONFIG_DVB_VES1X93=m +CONFIG_DVB_TUNER_ITD1000=m +CONFIG_DVB_TUNER_CX24113=m +CONFIG_DVB_TDA826X=m +CONFIG_DVB_TUA6100=m +CONFIG_DVB_CX24116=m +CONFIG_DVB_CX24117=m +CONFIG_DVB_CX24120=m +CONFIG_DVB_SI21XX=m +CONFIG_DVB_TS2020=m +CONFIG_DVB_DS3000=m +CONFIG_DVB_MB86A16=m +CONFIG_DVB_TDA10071=m + +# +# DVB-T (terrestrial) frontends +# +CONFIG_DVB_SP8870=m +CONFIG_DVB_SP887X=m +CONFIG_DVB_CX22700=m +CONFIG_DVB_CX22702=m +CONFIG_DVB_S5H1432=m +CONFIG_DVB_DRXD=m +CONFIG_DVB_L64781=m +CONFIG_DVB_TDA1004X=m +CONFIG_DVB_NXT6000=m +CONFIG_DVB_MT352=m +CONFIG_DVB_ZL10353=m +CONFIG_DVB_DIB3000MB=m +CONFIG_DVB_DIB3000MC=m +CONFIG_DVB_DIB7000M=m +CONFIG_DVB_DIB7000P=m +CONFIG_DVB_DIB9000=m +CONFIG_DVB_TDA10048=m +CONFIG_DVB_AF9013=m +CONFIG_DVB_EC100=m +CONFIG_DVB_HD29L2=m +CONFIG_DVB_STV0367=m +CONFIG_DVB_CXD2820R=m +CONFIG_DVB_CXD2841ER=m +CONFIG_DVB_RTL2830=m +CONFIG_DVB_RTL2832=m +CONFIG_DVB_SI2168=m +# CONFIG_DVB_AS102_FE is not set +# CONFIG_DVB_GP8PSK_FE is not set + +# +# DVB-C (cable) frontends +# +CONFIG_DVB_VES1820=m +CONFIG_DVB_TDA10021=m +CONFIG_DVB_TDA10023=m +CONFIG_DVB_STV0297=m + +# +# ATSC (North American/Korean Terrestrial/Cable DTV) frontends +# +CONFIG_DVB_NXT200X=m +CONFIG_DVB_OR51211=m +CONFIG_DVB_OR51132=m +CONFIG_DVB_BCM3510=m +CONFIG_DVB_LGDT330X=m +CONFIG_DVB_LGDT3305=m +CONFIG_DVB_LGDT3306A=m +CONFIG_DVB_LG2160=m +CONFIG_DVB_S5H1409=m +CONFIG_DVB_AU8522=m +CONFIG_DVB_AU8522_DTV=m +CONFIG_DVB_AU8522_V4L=m +CONFIG_DVB_S5H1411=m + +# +# ISDB-T (terrestrial) frontends +# +CONFIG_DVB_S921=m +CONFIG_DVB_DIB8000=m +CONFIG_DVB_MB86A20S=m + +# +# ISDB-S (satellite) & ISDB-T (terrestrial) frontends +# +CONFIG_DVB_TC90522=m + +# +# Digital terrestrial only tuners/PLL +# +CONFIG_DVB_PLL=m +CONFIG_DVB_TUNER_DIB0070=m +CONFIG_DVB_TUNER_DIB0090=m + +# +# SEC control devices for DVB-S +# +CONFIG_DVB_DRX39XYJ=m +CONFIG_DVB_LNBH25=m +CONFIG_DVB_LNBP21=m +CONFIG_DVB_LNBP22=m +CONFIG_DVB_ISL6405=m +CONFIG_DVB_ISL6421=m +CONFIG_DVB_ISL6423=m +CONFIG_DVB_A8293=m +CONFIG_DVB_SP2=m +CONFIG_DVB_LGS8GL5=m +CONFIG_DVB_LGS8GXX=m +CONFIG_DVB_ATBM8830=m +CONFIG_DVB_TDA665x=m +CONFIG_DVB_IX2505V=m +CONFIG_DVB_M88RS2000=m +CONFIG_DVB_AF9033=m +CONFIG_DVB_HORUS3A=m +CONFIG_DVB_ASCOT2E=m +CONFIG_DVB_HELENE=m + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set + +# +# Graphics support +# +CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 +CONFIG_TEGRA_HOST1X=m +CONFIG_TEGRA_HOST1X_FIREWALL=y +CONFIG_DRM=y +CONFIG_DRM_MIPI_DSI=y +# CONFIG_DRM_DP_AUX_CHARDEV is not set +CONFIG_DRM_KMS_HELPER=y +CONFIG_DRM_KMS_FB_HELPER=y +CONFIG_DRM_FBDEV_EMULATION=y +# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set +CONFIG_DRM_TTM=m +CONFIG_DRM_GEM_CMA_HELPER=y +CONFIG_DRM_KMS_CMA_HELPER=y + +# +# I2C encoder or helper chips +# +CONFIG_DRM_I2C_CH7006=m +CONFIG_DRM_I2C_SIL164=m +# CONFIG_DRM_I2C_NXP_TDA998X is not set +# CONFIG_DRM_HDLCD is not set +# CONFIG_DRM_MALI_DISPLAY is not set +# CONFIG_DRM_RADEON is not set +# CONFIG_DRM_AMDGPU is not set + +# +# ACP (Audio CoProcessor) Configuration +# +CONFIG_DRM_NOUVEAU=m +CONFIG_NOUVEAU_PLATFORM_DRIVER=y +CONFIG_NOUVEAU_DEBUG=5 +CONFIG_NOUVEAU_DEBUG_DEFAULT=3 +CONFIG_DRM_NOUVEAU_BACKLIGHT=y +# CONFIG_DRM_VGEM is not set +# CONFIG_DRM_EXYNOS is not set +# CONFIG_DRM_UDL is not set +# CONFIG_DRM_AST is not set +# CONFIG_DRM_MGAG200 is not set +# CONFIG_DRM_CIRRUS_QEMU is not set +CONFIG_DRM_RCAR_DU=y +CONFIG_DRM_RCAR_HDMI=y +CONFIG_DRM_RCAR_LVDS=y +CONFIG_DRM_RCAR_VSP=y +# CONFIG_DRM_QXL is not set +# CONFIG_DRM_BOCHS is not set +# CONFIG_DRM_VIRTIO_GPU is not set +CONFIG_DRM_MSM=y +# CONFIG_DRM_MSM_REGISTER_LOGGING is not set +CONFIG_DRM_MSM_HDMI_HDCP=y +CONFIG_DRM_MSM_DSI=y +CONFIG_DRM_MSM_DSI_PLL=y +CONFIG_DRM_MSM_DSI_28NM_PHY=y +CONFIG_DRM_MSM_DSI_20NM_PHY=y +CONFIG_DRM_MSM_DSI_28NM_8960_PHY=y +CONFIG_DRM_TEGRA=m +# CONFIG_DRM_TEGRA_DEBUG is not set +CONFIG_DRM_PANEL=y + +# +# Display Panels +# +CONFIG_DRM_PANEL_SIMPLE=m +# CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set +# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set +# CONFIG_DRM_PANEL_LG_LG4573 is not set +# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set +# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set +# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set +# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set +CONFIG_DRM_BRIDGE=y + +# +# Display Interface Bridges +# +# CONFIG_DRM_ANALOGIX_ANX78XX is not set +# CONFIG_DRM_DUMB_VGA_DAC is not set +CONFIG_DRM_DW_HDMI=y +# CONFIG_DRM_DW_HDMI_AHB_AUDIO is not set +# CONFIG_DRM_NXP_PTN3460 is not set +# CONFIG_DRM_PARADE_PS8622 is not set +# CONFIG_DRM_SII902X is not set +# CONFIG_DRM_TOSHIBA_TC358767 is not set +CONFIG_DRM_I2C_ADV7511=m +CONFIG_DRM_I2C_ADV7533=y +# CONFIG_DRM_ARCPGU is not set +CONFIG_DRM_HISI_KIRIN=m +CONFIG_HISI_KIRIN_DW_DSI=m +# CONFIG_DRM_MEDIATEK is not set +# CONFIG_DRM_LEGACY is not set + +# +# Frame buffer Devices +# +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +CONFIG_FB_CMDLINE=y +CONFIG_FB_NOTIFY=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +CONFIG_FB_SYS_FILLRECT=y +CONFIG_FB_SYS_COPYAREA=y +CONFIG_FB_SYS_IMAGEBLIT=y +# CONFIG_FB_FOREIGN_ENDIAN is not set +CONFIG_FB_SYS_FOPS=y +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +CONFIG_FB_BACKLIGHT=y +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +CONFIG_FB_ARMCLCD=y +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_EFI is not set +# CONFIG_FB_OPENCORES is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_I740 is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_SH_MOBILE_LCDC is not set +# CONFIG_FB_S3C is not set +# CONFIG_FB_SMSCUFX is not set +# CONFIG_FB_UDL is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_XEN_FBDEV_FRONTEND=y +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_FB_AUO_K190X is not set +# CONFIG_FB_SIMPLE is not set +# CONFIG_FB_SH_MOBILE_MERAM is not set +# CONFIG_FB_SSD1307 is not set +# CONFIG_FB_SM712 is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_L4F00242T03 is not set +# CONFIG_LCD_LMS283GF05 is not set +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI922X is not set +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +# CONFIG_LCD_PLATFORM is not set +# CONFIG_LCD_S6E63M0 is not set +# CONFIG_LCD_LD9040 is not set +# CONFIG_LCD_AMS369FG06 is not set +# CONFIG_LCD_LMS501KF03 is not set +# CONFIG_LCD_HX8357 is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=m +# CONFIG_BACKLIGHT_PWM is not set +# CONFIG_BACKLIGHT_PM8941_WLED is not set +# CONFIG_BACKLIGHT_ADP8860 is not set +# CONFIG_BACKLIGHT_ADP8870 is not set +# CONFIG_BACKLIGHT_LM3630A is not set +# CONFIG_BACKLIGHT_LM3639 is not set +CONFIG_BACKLIGHT_LP855X=m +# CONFIG_BACKLIGHT_GPIO is not set +# CONFIG_BACKLIGHT_LV5207LP is not set +# CONFIG_BACKLIGHT_BD6107 is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEOMODE_HELPERS=y +CONFIG_HDMI=y + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_DUMMY_CONSOLE_COLUMNS=80 +CONFIG_DUMMY_CONSOLE_ROWS=25 +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=y +# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_PCM_ELD=y +CONFIG_SND_PCM_IEC958=y +CONFIG_SND_DMAENGINE_PCM=y +CONFIG_SND_JACK=y +CONFIG_SND_JACK_INPUT_DEV=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +CONFIG_SND_PCM_TIMER=y +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_PROC_FS=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_ALOOP is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_PCI=y +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CTXFI is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LOLA is not set +# CONFIG_SND_LX6464ES is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SE6X is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set + +# +# HD-Audio +# +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDA_TEGRA is not set +CONFIG_SND_HDA_PREALLOC_SIZE=64 +CONFIG_SND_SPI=y +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_UA101 is not set +# CONFIG_SND_USB_CAIAQ is not set +# CONFIG_SND_USB_6FIRE is not set +# CONFIG_SND_USB_HIFACE is not set +# CONFIG_SND_BCD2000 is not set +# CONFIG_SND_USB_POD is not set +# CONFIG_SND_USB_PODHD is not set +# CONFIG_SND_USB_TONEPORT is not set +# CONFIG_SND_USB_VARIAX is not set +CONFIG_SND_SOC=y +CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y +# CONFIG_SND_SOC_AMD_ACP is not set +# CONFIG_SND_ATMEL_SOC is not set +# CONFIG_SND_DESIGNWARE_I2S is not set + +# +# SoC Audio for Freescale CPUs +# + +# +# Common SoC Audio options for Freescale CPUs: +# +# CONFIG_SND_SOC_FSL_ASRC is not set +# CONFIG_SND_SOC_FSL_SAI is not set +# CONFIG_SND_SOC_FSL_SSI is not set +# CONFIG_SND_SOC_FSL_SPDIF is not set +# CONFIG_SND_SOC_FSL_ESAI is not set +# CONFIG_SND_SOC_IMX_AUDMUX is not set +# CONFIG_SND_KIRKWOOD_SOC is not set +# CONFIG_SND_SOC_IMG is not set +# CONFIG_SND_SOC_MT2701 is not set +# CONFIG_SND_SOC_MT8173 is not set +# CONFIG_SND_SOC_QCOM is not set +# CONFIG_SND_SOC_ROCKCHIP is not set +CONFIG_SND_SOC_SAMSUNG=y +# CONFIG_SND_SAMSUNG_PCM is not set +# CONFIG_SND_SAMSUNG_SPDIF is not set +# CONFIG_SND_SAMSUNG_I2S is not set +# CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994 is not set +# CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF is not set +# CONFIG_SND_SOC_SMDK_WM8994_PCM is not set +# CONFIG_SND_SOC_SNOW is not set +# CONFIG_SND_SOC_ARNDALE_RT5631_ALC5631 is not set + +# +# SoC Audio support for SuperH +# +# CONFIG_SND_SOC_SH4_FSI is not set +CONFIG_SND_SOC_RCAR=y + +# +# Allwinner SoC Audio support +# +# CONFIG_SND_SUN4I_CODEC is not set +# CONFIG_SND_SUN4I_I2S is not set +# CONFIG_SND_SUN4I_SPDIF is not set +# CONFIG_SND_SOC_TEGRA is not set +# CONFIG_SND_SOC_XTFPGA_I2S is not set +CONFIG_SND_SOC_I2C_AND_SPI=y + +# +# CODEC drivers +# +# CONFIG_SND_SOC_AC97_CODEC is not set +# CONFIG_SND_SOC_ADAU1701 is not set +# CONFIG_SND_SOC_ADAU7002 is not set +# CONFIG_SND_SOC_AK4104 is not set +# CONFIG_SND_SOC_AK4554 is not set +CONFIG_SND_SOC_AK4613=y +# CONFIG_SND_SOC_AK4642 is not set +# CONFIG_SND_SOC_AK5386 is not set +# CONFIG_SND_SOC_ALC5623 is not set +# CONFIG_SND_SOC_BT_SCO is not set +# CONFIG_SND_SOC_CS35L32 is not set +# CONFIG_SND_SOC_CS35L33 is not set +# CONFIG_SND_SOC_CS42L51_I2C is not set +# CONFIG_SND_SOC_CS42L52 is not set +# CONFIG_SND_SOC_CS42L56 is not set +# CONFIG_SND_SOC_CS42L73 is not set +# CONFIG_SND_SOC_CS4265 is not set +# CONFIG_SND_SOC_CS4270 is not set +# CONFIG_SND_SOC_CS4271_I2C is not set +# CONFIG_SND_SOC_CS4271_SPI is not set +# CONFIG_SND_SOC_CS42XX8_I2C is not set +# CONFIG_SND_SOC_CS4349 is not set +# CONFIG_SND_SOC_CS53L30 is not set +CONFIG_SND_SOC_HDMI_CODEC=y +# CONFIG_SND_SOC_ES8328 is not set +# CONFIG_SND_SOC_GTM601 is not set +# CONFIG_SND_SOC_INNO_RK3036 is not set +# CONFIG_SND_SOC_MAX98504 is not set +# CONFIG_SND_SOC_MAX9860 is not set +# CONFIG_SND_SOC_PCM1681 is not set +# CONFIG_SND_SOC_PCM179X_I2C is not set +# CONFIG_SND_SOC_PCM179X_SPI is not set +# CONFIG_SND_SOC_PCM3168A_I2C is not set +# CONFIG_SND_SOC_PCM3168A_SPI is not set +# CONFIG_SND_SOC_PCM512x_I2C is not set +# CONFIG_SND_SOC_PCM512x_SPI is not set +# CONFIG_SND_SOC_RT5616 is not set +# CONFIG_SND_SOC_RT5631 is not set +# CONFIG_SND_SOC_RT5677_SPI is not set +# CONFIG_SND_SOC_SGTL5000 is not set +# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set +# CONFIG_SND_SOC_SPDIF is not set +# CONFIG_SND_SOC_SSM2602_SPI is not set +# CONFIG_SND_SOC_SSM2602_I2C is not set +# CONFIG_SND_SOC_SSM4567 is not set +# CONFIG_SND_SOC_STA32X is not set +# CONFIG_SND_SOC_STA350 is not set +# CONFIG_SND_SOC_STI_SAS is not set +# CONFIG_SND_SOC_TAS2552 is not set +# CONFIG_SND_SOC_TAS5086 is not set +# CONFIG_SND_SOC_TAS571X is not set +# CONFIG_SND_SOC_TAS5720 is not set +# CONFIG_SND_SOC_TFA9879 is not set +# CONFIG_SND_SOC_TLV320AIC23_I2C is not set +# CONFIG_SND_SOC_TLV320AIC23_SPI is not set +# CONFIG_SND_SOC_TLV320AIC31XX is not set +# CONFIG_SND_SOC_TLV320AIC3X is not set +# CONFIG_SND_SOC_TS3A227E is not set +# CONFIG_SND_SOC_WM8510 is not set +# CONFIG_SND_SOC_WM8523 is not set +# CONFIG_SND_SOC_WM8580 is not set +# CONFIG_SND_SOC_WM8711 is not set +# CONFIG_SND_SOC_WM8728 is not set +# CONFIG_SND_SOC_WM8731 is not set +# CONFIG_SND_SOC_WM8737 is not set +# CONFIG_SND_SOC_WM8741 is not set +# CONFIG_SND_SOC_WM8750 is not set +# CONFIG_SND_SOC_WM8753 is not set +# CONFIG_SND_SOC_WM8770 is not set +# CONFIG_SND_SOC_WM8776 is not set +# CONFIG_SND_SOC_WM8804_I2C is not set +# CONFIG_SND_SOC_WM8804_SPI is not set +# CONFIG_SND_SOC_WM8903 is not set +# CONFIG_SND_SOC_WM8960 is not set +# CONFIG_SND_SOC_WM8962 is not set +# CONFIG_SND_SOC_WM8974 is not set +# CONFIG_SND_SOC_WM8978 is not set +# CONFIG_SND_SOC_WM8985 is not set +# CONFIG_SND_SOC_NAU8810 is not set +# CONFIG_SND_SOC_TPA6130A2 is not set +CONFIG_SND_SIMPLE_CARD_UTILS=y +CONFIG_SND_SIMPLE_CARD=y +# CONFIG_SND_SIMPLE_SCU_CARD is not set +# CONFIG_SOUND_PRIME is not set + +# +# HID support +# +CONFIG_HID=y +# CONFIG_HID_BATTERY_STRENGTH is not set +# CONFIG_HIDRAW is not set +# CONFIG_UHID is not set +CONFIG_HID_GENERIC=y + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=y +# CONFIG_HID_ACRUX is not set +CONFIG_HID_APPLE=y +# CONFIG_HID_APPLEIR is not set +# CONFIG_HID_AUREAL is not set +CONFIG_HID_BELKIN=y +# CONFIG_HID_BETOP_FF is not set +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +# CONFIG_HID_CORSAIR is not set +# CONFIG_HID_PRODIKEYS is not set +# CONFIG_HID_CMEDIA is not set +# CONFIG_HID_CP2112 is not set +CONFIG_HID_CYPRESS=y +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EMS_FF is not set +# CONFIG_HID_ELECOM is not set +# CONFIG_HID_ELO is not set +CONFIG_HID_EZKEY=y +# CONFIG_HID_GEMBIRD is not set +# CONFIG_HID_GFRM is not set +# CONFIG_HID_HOLTEK is not set +# CONFIG_HID_GT683R is not set +# CONFIG_HID_KEYTOUCH is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_UCLOGIC is not set +# CONFIG_HID_WALTOP is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_ICADE is not set +# CONFIG_HID_TWINHAN is not set +CONFIG_HID_KENSINGTON=y +# CONFIG_HID_LCPOWER is not set +# CONFIG_HID_LED is not set +# CONFIG_HID_LENOVO is not set +CONFIG_HID_LOGITECH=y +# CONFIG_HID_LOGITECH_HIDPP is not set +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGIG940_FF is not set +# CONFIG_LOGIWHEELS_FF is not set +# CONFIG_HID_MAGICMOUSE is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +# CONFIG_HID_MULTITOUCH is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_ORTEK is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PENMOUNT is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_PICOLCD is not set +# CONFIG_HID_PLANTRONICS is not set +# CONFIG_HID_PRIMAX is not set +# CONFIG_HID_ROCCAT is not set +# CONFIG_HID_SAITEK is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SPEEDLINK is not set +# CONFIG_HID_STEELSERIES is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_RMI is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TIVO is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THINGM is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_WACOM is not set +# CONFIG_HID_WIIMOTE is not set +# CONFIG_HID_XINMO is not set +# CONFIG_HID_ZEROPLUS is not set +# CONFIG_HID_ZYDACRON is not set +# CONFIG_HID_SENSOR_HUB is not set +# CONFIG_HID_ALPS is not set + +# +# USB HID support +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# I2C HID support +# +# CONFIG_I2C_HID is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_SUPPORT=y +CONFIG_USB_COMMON=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB=y +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEFAULT_PERSIST=y +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_OTG=y +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_OTG_FSM is not set +# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_PCI=y +CONFIG_USB_XHCI_PLATFORM=y +# CONFIG_USB_XHCI_MTK is not set +# CONFIG_USB_XHCI_MVEBU is not set +CONFIG_USB_XHCI_RCAR=y +CONFIG_USB_XHCI_TEGRA=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +CONFIG_USB_EHCI_PCI=y +CONFIG_USB_EHCI_MSM=y +# CONFIG_USB_EHCI_TEGRA is not set +CONFIG_USB_EHCI_EXYNOS=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_FOTG210_HCD is not set +# CONFIG_USB_MAX3421_HCD is not set +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PCI=y +CONFIG_USB_OHCI_EXYNOS=y +CONFIG_USB_OHCI_HCD_PLATFORM=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_RENESAS_USBHS_HCD is not set +# CONFIG_USB_HCD_TEST_MODE is not set +CONFIG_USB_RENESAS_USBHS=y + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_REALTEK is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_STORAGE_ENE_UB6250 is not set +# CONFIG_USB_UAS is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USBIP_CORE is not set +# CONFIG_USB_MUSB_HDRC is not set +CONFIG_USB_DWC3=y +# CONFIG_USB_DWC3_HOST is not set +# CONFIG_USB_DWC3_GADGET is not set +CONFIG_USB_DWC3_DUAL_ROLE=y + +# +# Platform Glue Driver Support +# +CONFIG_USB_DWC3_EXYNOS=y +CONFIG_USB_DWC3_PCI=y +CONFIG_USB_DWC3_OF_SIMPLE=y +CONFIG_USB_DWC2=y +# CONFIG_USB_DWC2_HOST is not set + +# +# Gadget/Dual-role mode requires USB Gadget support to be enabled +# +# CONFIG_USB_DWC2_PERIPHERAL is not set +CONFIG_USB_DWC2_DUAL_ROLE=y +# CONFIG_USB_DWC2_PCI is not set +# CONFIG_USB_DWC2_DEBUG is not set +# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_OF=y +CONFIG_USB_CHIPIDEA_UDC=y +CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_ISP1760=y +CONFIG_USB_ISP1760_HCD=y +CONFIG_USB_ISP1761_UDC=y +# CONFIG_USB_ISP1760_HOST_ROLE is not set +# CONFIG_USB_ISP1760_GADGET_ROLE is not set +CONFIG_USB_ISP1760_DUAL_ROLE=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_EHSET_TEST_FIXTURE is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_YUREX is not set +# CONFIG_USB_EZUSB_FX2 is not set +CONFIG_USB_HSIC_USB3503=y +# CONFIG_USB_HSIC_USB4604 is not set +# CONFIG_USB_LINK_LAYER_TEST is not set +# CONFIG_USB_CHAOSKEY is not set +# CONFIG_UCSI is not set + +# +# USB Physical Layer drivers +# +CONFIG_USB_PHY=y +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_USB_ISP1301 is not set +CONFIG_USB_MSM_OTG=y +# CONFIG_USB_QCOM_8X16_PHY is not set +CONFIG_USB_ULPI=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 + +# +# USB Peripheral Controller +# +# CONFIG_USB_FOTG210_UDC is not set +# CONFIG_USB_GR_UDC is not set +# CONFIG_USB_R8A66597 is not set +CONFIG_USB_RENESAS_USBHS_UDC=y +# CONFIG_USB_RENESAS_USB3 is not set +# CONFIG_USB_PXA27X is not set +# CONFIG_USB_MV_UDC is not set +# CONFIG_USB_MV_U3D is not set +# CONFIG_USB_M66592 is not set +# CONFIG_USB_BDC_UDC is not set +# CONFIG_USB_AMD5536UDC is not set +# CONFIG_USB_NET2272 is not set +# CONFIG_USB_NET2280 is not set +# CONFIG_USB_GOKU is not set +# CONFIG_USB_EG20T is not set +# CONFIG_USB_GADGET_XILINX is not set +# CONFIG_USB_DUMMY_HCD is not set +# CONFIG_USB_CONFIGFS is not set +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_G_NCM is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FUNCTIONFS is not set +# CONFIG_USB_MASS_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_ACM_MS is not set +# CONFIG_USB_G_MULTI is not set +# CONFIG_USB_G_HID is not set +# CONFIG_USB_G_DBGP is not set +# CONFIG_USB_G_WEBCAM is not set +# CONFIG_USB_LED_TRIG is not set +# CONFIG_USB_ULPI_BUS is not set +# CONFIG_UWB is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_PWRSEQ_EMMC=y +CONFIG_PWRSEQ_SIMPLE=y + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_MINORS=32 +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_ARMMMCI=y +CONFIG_MMC_QCOM_DML=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_IO_ACCESSORS=y +# CONFIG_MMC_SDHCI_PCI is not set +CONFIG_MMC_SDHCI_ACPI=y +CONFIG_MMC_SDHCI_PLTFM=y +# CONFIG_MMC_SDHCI_OF_ARASAN is not set +# CONFIG_MMC_SDHCI_OF_AT91 is not set +CONFIG_MMC_SDHCI_OF_ESDHC=y +CONFIG_MMC_SDHCI_TEGRA=y +# CONFIG_MMC_SDHCI_PXAV3 is not set +# CONFIG_MMC_SDHCI_F_SDH30 is not set +CONFIG_MMC_SDHCI_IPROC=y +CONFIG_MMC_SDHCI_MSM=y +# CONFIG_MMC_TIFM_SD is not set +CONFIG_MMC_SPI=y +CONFIG_MMC_TMIO_CORE=y +CONFIG_MMC_SDHI=y +# CONFIG_MMC_SDHI_PIO is not set +# CONFIG_MMC_CB710 is not set +# CONFIG_MMC_VIA_SDMMC is not set +CONFIG_MMC_DW=y +CONFIG_MMC_DW_PLTFM=y +CONFIG_MMC_DW_EXYNOS=y +CONFIG_MMC_DW_K3=y +# CONFIG_MMC_DW_PCI is not set +# CONFIG_MMC_DW_ROCKCHIP is not set +# CONFIG_MMC_SH_MMCIF is not set +# CONFIG_MMC_VUB300 is not set +# CONFIG_MMC_USHC is not set +# CONFIG_MMC_USDHI6ROL0 is not set +CONFIG_MMC_SUNXI=y +# CONFIG_MMC_TOSHIBA_PCI is not set +# CONFIG_MMC_MTK is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +# CONFIG_LEDS_CLASS_FLASH is not set + +# +# LED drivers +# +# CONFIG_LEDS_BCM6328 is not set +# CONFIG_LEDS_BCM6358 is not set +# CONFIG_LEDS_LM3530 is not set +# CONFIG_LEDS_LM3642 is not set +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_LP3952 is not set +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP5523 is not set +# CONFIG_LEDS_LP5562 is not set +# CONFIG_LEDS_LP8501 is not set +# CONFIG_LEDS_LP8860 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_PCA963X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_PWM is not set +# CONFIG_LEDS_REGULATOR is not set +# CONFIG_LEDS_BD2802 is not set +# CONFIG_LEDS_LT3593 is not set +# CONFIG_LEDS_TCA6507 is not set +# CONFIG_LEDS_TLC591XX is not set +# CONFIG_LEDS_LM355x is not set +# CONFIG_LEDS_IS31FL319X is not set +# CONFIG_LEDS_IS31FL32XX is not set + +# +# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) +# +# CONFIG_LEDS_BLINKM is not set +CONFIG_LEDS_SYSCON=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +# CONFIG_LEDS_TRIGGER_ONESHOT is not set +# CONFIG_LEDS_TRIGGER_DISK is not set +# CONFIG_LEDS_TRIGGER_MTD is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +CONFIG_LEDS_TRIGGER_CPU=y +# CONFIG_LEDS_TRIGGER_GPIO is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_LEDS_TRIGGER_TRANSIENT is not set +# CONFIG_LEDS_TRIGGER_CAMERA is not set +# CONFIG_LEDS_TRIGGER_PANIC is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_EDAC_SUPPORT=y +# CONFIG_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +CONFIG_RTC_SYSTOHC=y +CONFIG_RTC_SYSTOHC_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_ABB5ZES3 is not set +# CONFIG_RTC_DRV_ABX80X is not set +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_HYM8563 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +CONFIG_RTC_DRV_MAX77686=y +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_ISL12022 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8523 is not set +# CONFIG_RTC_DRV_PCF85063 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8010 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set +# CONFIG_RTC_DRV_EM3027 is not set +# CONFIG_RTC_DRV_RV8803 is not set +CONFIG_RTC_DRV_S5M=y + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T93 is not set +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1302 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1343 is not set +# CONFIG_RTC_DRV_DS1347 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6916 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RX4581 is not set +# CONFIG_RTC_DRV_RX6110 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_PCF2123 is not set +# CONFIG_RTC_DRV_MCP795 is not set +CONFIG_RTC_I2C_AND_SPI=y + +# +# SPI and I2C RTC drivers +# +CONFIG_RTC_DRV_DS3232=y +# CONFIG_RTC_DRV_PCF2127 is not set +# CONFIG_RTC_DRV_RV3029C2 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1685_FAMILY is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_DS2404 is not set +CONFIG_RTC_DRV_EFI=y +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set +# CONFIG_RTC_DRV_ZYNQMP is not set + +# +# on-CPU RTC drivers +# +CONFIG_HAVE_S3C_RTC=y +CONFIG_RTC_DRV_S3C=y +# CONFIG_RTC_DRV_PL030 is not set +CONFIG_RTC_DRV_PL031=y +CONFIG_RTC_DRV_SUN6I=y +# CONFIG_RTC_DRV_MV is not set +# CONFIG_RTC_DRV_ARMADA38X is not set +# CONFIG_RTC_DRV_PM8XXX is not set +CONFIG_RTC_DRV_TEGRA=y +# CONFIG_RTC_DRV_SNVS is not set +CONFIG_RTC_DRV_XGENE=y + +# +# HID Sensor RTC drivers +# +# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set +CONFIG_DMADEVICES=y +# CONFIG_DMADEVICES_DEBUG is not set + +# +# DMA Devices +# +CONFIG_DMA_ENGINE=y +CONFIG_DMA_VIRTUAL_CHANNELS=y +CONFIG_DMA_ACPI=y +CONFIG_DMA_OF=y +# CONFIG_AMBA_PL08X is not set +# CONFIG_FSL_EDMA is not set +# CONFIG_INTEL_IDMA64 is not set +# CONFIG_K3_DMA is not set +# CONFIG_MV_XOR is not set +# CONFIG_MV_XOR_V2 is not set +CONFIG_PL330_DMA=y +CONFIG_TEGRA20_APB_DMA=y +# CONFIG_TEGRA210_ADMA is not set +# CONFIG_XGENE_DMA is not set +# CONFIG_XILINX_DMA is not set +# CONFIG_XILINX_ZYNQMP_DMA is not set +# CONFIG_ZX_DMA is not set +CONFIG_QCOM_BAM_DMA=y +CONFIG_QCOM_HIDMA_MGMT=y +CONFIG_QCOM_HIDMA=y +# CONFIG_DW_DMAC is not set +# CONFIG_DW_DMAC_PCI is not set +CONFIG_RENESAS_DMA=y +CONFIG_SH_DMAE_BASE=y +# CONFIG_SH_DMAE is not set +CONFIG_RCAR_DMAC=y +CONFIG_RENESAS_USB_DMAC=y +# CONFIG_SUDMAC is not set + +# +# DMA Clients +# +# CONFIG_ASYNC_TX_DMA is not set +# CONFIG_DMATEST is not set + +# +# DMABUF options +# +CONFIG_SYNC_FILE=y +# CONFIG_SW_SYNC is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set +CONFIG_VFIO_IOMMU_TYPE1=y +CONFIG_VFIO_VIRQFD=y +CONFIG_VFIO=y +# CONFIG_VFIO_NOIOMMU is not set +CONFIG_VFIO_PCI=y +CONFIG_VFIO_PCI_MMAP=y +CONFIG_VFIO_PCI_INTX=y +# CONFIG_VFIO_PLATFORM is not set +CONFIG_IRQ_BYPASS_MANAGER=y +# CONFIG_VIRT_DRIVERS is not set +CONFIG_VIRTIO=y + +# +# Virtio drivers +# +CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_PCI_LEGACY=y +CONFIG_VIRTIO_BALLOON=y +# CONFIG_VIRTIO_INPUT is not set +CONFIG_VIRTIO_MMIO=y +# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set + +# +# Microsoft Hyper-V guest support +# + +# +# Xen driver support +# +CONFIG_XEN_BALLOON=y +CONFIG_XEN_SCRUB_PAGES=y +CONFIG_XEN_DEV_EVTCHN=y +CONFIG_XEN_BACKEND=y +CONFIG_XENFS=y +CONFIG_XEN_COMPAT_XENFS=y +CONFIG_XEN_SYS_HYPERVISOR=y +CONFIG_XEN_XENBUS_FRONTEND=y +CONFIG_XEN_GNTDEV=y +CONFIG_XEN_GRANT_DEV_ALLOC=y +CONFIG_SWIOTLB_XEN=y +CONFIG_XEN_PRIVCMD=y +CONFIG_XEN_EFI=y +CONFIG_XEN_AUTO_XLATE=y +# CONFIG_STAGING is not set +# CONFIG_GOLDFISH is not set +CONFIG_CHROME_PLATFORMS=y +# CONFIG_CROS_EC_CHARDEV is not set +CONFIG_CROS_EC_PROTO=y +# CONFIG_CROS_KBD_LED_BACKLIGHT is not set +CONFIG_CLKDEV_LOOKUP=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_COMMON_CLK=y + +# +# Common Clock Framework +# +CONFIG_COMMON_CLK_VERSATILE=y +CONFIG_CLK_SP810=y +CONFIG_CLK_VEXPRESS_OSC=y +# CONFIG_COMMON_CLK_MAX77686 is not set +CONFIG_COMMON_CLK_SCPI=y +# CONFIG_COMMON_CLK_SI5351 is not set +# CONFIG_COMMON_CLK_SI514 is not set +# CONFIG_COMMON_CLK_SI570 is not set +# CONFIG_COMMON_CLK_CDCE706 is not set +# CONFIG_COMMON_CLK_CDCE925 is not set +CONFIG_COMMON_CLK_CS2000_CP=y +CONFIG_COMMON_CLK_S2MPS11=y +CONFIG_CLK_QORIQ=y +CONFIG_COMMON_CLK_XGENE=y +# CONFIG_COMMON_CLK_NXP is not set +# CONFIG_COMMON_CLK_PWM is not set +CONFIG_COMMON_CLK_5P49V5923A=y +# CONFIG_COMMON_CLK_PXA is not set +# CONFIG_COMMON_CLK_PIC32 is not set +CONFIG_COMMON_CLK_IPROC=y +CONFIG_CLK_BCM_NS2=y +CONFIG_COMMON_CLK_HI3519=y +CONFIG_COMMON_CLK_HI6220=y +CONFIG_RESET_HISI=y +# CONFIG_STUB_CLK_HI6220 is not set +CONFIG_COMMON_CLK_MEDIATEK=y +CONFIG_COMMON_CLK_MT8135=y +CONFIG_COMMON_CLK_MT8173=y +CONFIG_COMMON_CLK_AMLOGIC=y +CONFIG_COMMON_CLK_GXBB=y +CONFIG_ARMADA_37XX_CLK=y +CONFIG_ARMADA_AP806_SYSCON=y +CONFIG_ARMADA_CP110_SYSCON=y +CONFIG_QCOM_GDSC=y +CONFIG_COMMON_CLK_QCOM=y +# CONFIG_APQ_GCC_8084 is not set +# CONFIG_APQ_MMCC_8084 is not set +# CONFIG_IPQ_GCC_4019 is not set +# CONFIG_IPQ_GCC_806X is not set +# CONFIG_IPQ_LCC_806X is not set +# CONFIG_MSM_GCC_8660 is not set +CONFIG_MSM_GCC_8916=y +# CONFIG_MSM_GCC_8960 is not set +# CONFIG_MSM_LCC_8960 is not set +# CONFIG_MDM_GCC_9615 is not set +# CONFIG_MDM_LCC_9615 is not set +# CONFIG_MSM_MMCC_8960 is not set +# CONFIG_MSM_GCC_8974 is not set +# CONFIG_MSM_MMCC_8974 is not set +CONFIG_MSM_GCC_8996=y +CONFIG_MSM_MMCC_8996=y +CONFIG_CLK_RENESAS_CPG_MSSR=y +CONFIG_COMMON_CLK_SAMSUNG=y +CONFIG_EXYNOS_ARM64_COMMON_CLK=y +CONFIG_EXYNOS_AUDSS_CLK_CON=y +CONFIG_SUNXI_CCU=y +# CONFIG_SUN6I_A31_CCU is not set +# CONFIG_SUN8I_A23_CCU is not set +# CONFIG_SUN8I_A33_CCU is not set +# CONFIG_SUN8I_H3_CCU is not set +CONFIG_CLK_UNIPHIER=y +CONFIG_HWSPINLOCK=y + +# +# Hardware Spinlock drivers +# +CONFIG_HWSPINLOCK_QCOM=y +CONFIG_HWSPINLOCK_RCAR=y + +# +# Clock Source drivers +# +CONFIG_CLKSRC_OF=y +CONFIG_CLKSRC_ACPI=y +CONFIG_CLKSRC_PROBE=y +CONFIG_CLKSRC_MMIO=y +CONFIG_ROCKCHIP_TIMER=y +CONFIG_ARM_ARCH_TIMER=y +CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y +CONFIG_FSL_ERRATUM_A008585=y +CONFIG_ARM_TIMER_SP804=y +# CONFIG_ATMEL_PIT is not set +CONFIG_MTK_TIMER=y +# CONFIG_SH_TIMER_CMT is not set +# CONFIG_SH_TIMER_MTU2 is not set +# CONFIG_SH_TIMER_TMU is not set +# CONFIG_EM_TIMER_STI is not set +CONFIG_CLKSRC_VERSATILE=y +CONFIG_MAILBOX=y +CONFIG_ARM_MHU=y +# CONFIG_PLATFORM_MHU is not set +# CONFIG_PL320_MBOX is not set +# CONFIG_ROCKCHIP_MBOX is not set +# CONFIG_PCC is not set +# CONFIG_ALTERA_MBOX is not set +CONFIG_HI6220_MBOX=y +# CONFIG_MAILBOX_TEST is not set +# CONFIG_XGENE_SLIMPRO_MBOX is not set +CONFIG_BCM_PDC_MBOX=y +CONFIG_IOMMU_API=y +CONFIG_IOMMU_SUPPORT=y + +# +# Generic IOMMU Pagetable Support +# +CONFIG_IOMMU_IO_PGTABLE=y +CONFIG_IOMMU_IO_PGTABLE_LPAE=y +# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set +# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set +CONFIG_IOMMU_IOVA=y +CONFIG_OF_IOMMU=y +CONFIG_IOMMU_DMA=y +# CONFIG_EXYNOS_IOMMU is not set +# CONFIG_IPMMU_VMSA is not set +CONFIG_ARM_SMMU=y +# CONFIG_ARM_SMMU_V3 is not set +# CONFIG_MTK_IOMMU is not set + +# +# Remoteproc drivers +# +# CONFIG_STE_MODEM_RPROC is not set +# CONFIG_QCOM_Q6V5_PIL is not set +# CONFIG_QCOM_WCNSS_PIL is not set + +# +# Rpmsg drivers +# +CONFIG_RPMSG=y +CONFIG_RPMSG_VIRTIO=y + +# +# SOC (System On Chip) specific Drivers +# + +# +# Broadcom SoC drivers +# +CONFIG_MTK_INFRACFG=y +# CONFIG_MTK_PMIC_WRAP is not set +CONFIG_MTK_SCPSYS=y +# CONFIG_QCOM_GSBI is not set +CONFIG_QCOM_SMEM=y +CONFIG_QCOM_SMD=y +CONFIG_QCOM_SMD_RPM=y +# CONFIG_QCOM_SMP2P is not set +# CONFIG_QCOM_SMSM is not set +# CONFIG_QCOM_WCNSS_CTRL is not set +# CONFIG_ROCKCHIP_PM_DOMAINS is not set +CONFIG_SOC_SAMSUNG=y +CONFIG_SUNXI_SRAM=y +CONFIG_ARCH_TEGRA_132_SOC=y +CONFIG_ARCH_TEGRA_210_SOC=y +# CONFIG_SOC_TI is not set +CONFIG_RCAR_THERMAL_EMS_ENABLED=y +CONFIG_RCAR_DDR_BACKUP=y +# CONFIG_PM_DEVFREQ is not set +CONFIG_EXTCON=y + +# +# Extcon Device Drivers +# +# CONFIG_EXTCON_ADC_JACK is not set +# CONFIG_EXTCON_GPIO is not set +# CONFIG_EXTCON_MAX3355 is not set +# CONFIG_EXTCON_QCOM_SPMI_MISC is not set +# CONFIG_EXTCON_RT8973A is not set +# CONFIG_EXTCON_SM5502 is not set +CONFIG_EXTCON_USB_GPIO=y +# CONFIG_MEMORY is not set +CONFIG_IIO=y +# CONFIG_IIO_BUFFER is not set +# CONFIG_IIO_CONFIGFS is not set +# CONFIG_IIO_TRIGGER is not set +# CONFIG_IIO_SW_DEVICE is not set +# CONFIG_IIO_SW_TRIGGER is not set + +# +# Accelerometers +# +# CONFIG_BMA180 is not set +# CONFIG_BMA220 is not set +# CONFIG_BMC150_ACCEL is not set +# CONFIG_DMARD06 is not set +# CONFIG_DMARD09 is not set +# CONFIG_IIO_ST_ACCEL_3AXIS is not set +# CONFIG_KXSD9 is not set +# CONFIG_KXCJK1013 is not set +# CONFIG_MC3230 is not set +# CONFIG_MMA7455_I2C is not set +# CONFIG_MMA7455_SPI is not set +# CONFIG_MMA7660 is not set +# CONFIG_MMA8452 is not set +# CONFIG_MMA9551 is not set +# CONFIG_MMA9553 is not set +# CONFIG_MXC4005 is not set +# CONFIG_MXC6255 is not set +# CONFIG_STK8312 is not set +# CONFIG_STK8BA50 is not set + +# +# Analog to digital converters +# +# CONFIG_AD7266 is not set +# CONFIG_AD7291 is not set +# CONFIG_AD7298 is not set +# CONFIG_AD7476 is not set +# CONFIG_AD7791 is not set +# CONFIG_AD7793 is not set +# CONFIG_AD7887 is not set +# CONFIG_AD7923 is not set +# CONFIG_AD799X is not set +# CONFIG_BCM_IPROC_ADC is not set +# CONFIG_BERLIN2_ADC is not set +# CONFIG_CC10001_ADC is not set +CONFIG_EXYNOS_ADC=y +# CONFIG_HI8435 is not set +# CONFIG_INA2XX_ADC is not set +# CONFIG_LTC2485 is not set +# CONFIG_MAX1027 is not set +# CONFIG_MAX1363 is not set +# CONFIG_MCP320X is not set +# CONFIG_MCP3422 is not set +# CONFIG_MEDIATEK_MT6577_AUXADC is not set +# CONFIG_NAU7802 is not set +# CONFIG_QCOM_SPMI_IADC is not set +# CONFIG_QCOM_SPMI_VADC is not set +# CONFIG_ROCKCHIP_SARADC is not set +# CONFIG_TI_ADC081C is not set +# CONFIG_TI_ADC0832 is not set +# CONFIG_TI_ADC12138 is not set +# CONFIG_TI_ADC128S052 is not set +# CONFIG_TI_ADC161S626 is not set +# CONFIG_TI_ADS1015 is not set +# CONFIG_TI_ADS8688 is not set +# CONFIG_VF610_ADC is not set + +# +# Amplifiers +# +# CONFIG_AD8366 is not set + +# +# Chemical Sensors +# +# CONFIG_ATLAS_PH_SENSOR is not set +# CONFIG_IAQCORE is not set +# CONFIG_VZ89X is not set + +# +# Hid Sensor IIO Common +# + +# +# SSP Sensor Common +# +# CONFIG_IIO_SSP_SENSORHUB is not set + +# +# Digital to analog converters +# +# CONFIG_AD5064 is not set +# CONFIG_AD5360 is not set +# CONFIG_AD5380 is not set +# CONFIG_AD5421 is not set +# CONFIG_AD5446 is not set +# CONFIG_AD5449 is not set +# CONFIG_AD5592R is not set +# CONFIG_AD5593R is not set +# CONFIG_AD5504 is not set +# CONFIG_AD5624R_SPI is not set +# CONFIG_AD5686 is not set +# CONFIG_AD5755 is not set +# CONFIG_AD5761 is not set +# CONFIG_AD5764 is not set +# CONFIG_AD5791 is not set +# CONFIG_AD7303 is not set +# CONFIG_AD8801 is not set +# CONFIG_M62332 is not set +# CONFIG_MAX517 is not set +# CONFIG_MAX5821 is not set +# CONFIG_MCP4725 is not set +# CONFIG_MCP4922 is not set +# CONFIG_VF610_DAC is not set + +# +# IIO dummy driver +# + +# +# Frequency Synthesizers DDS/PLL +# + +# +# Clock Generator/Distribution +# +# CONFIG_AD9523 is not set + +# +# Phase-Locked Loop (PLL) frequency synthesizers +# +# CONFIG_ADF4350 is not set + +# +# Digital gyroscope sensors +# +# CONFIG_ADIS16080 is not set +# CONFIG_ADIS16130 is not set +# CONFIG_ADIS16136 is not set +# CONFIG_ADIS16260 is not set +# CONFIG_ADXRS450 is not set +# CONFIG_BMG160 is not set +# CONFIG_IIO_ST_GYRO_3AXIS is not set +# CONFIG_ITG3200 is not set + +# +# Health Sensors +# + +# +# Heart Rate Monitors +# +# CONFIG_AFE4403 is not set +# CONFIG_AFE4404 is not set +# CONFIG_MAX30100 is not set + +# +# Humidity sensors +# +# CONFIG_AM2315 is not set +# CONFIG_DHT11 is not set +# CONFIG_HDC100X is not set +# CONFIG_HTU21 is not set +# CONFIG_SI7005 is not set +# CONFIG_SI7020 is not set + +# +# Inertial measurement units +# +# CONFIG_ADIS16400 is not set +# CONFIG_ADIS16480 is not set +# CONFIG_BMI160_I2C is not set +# CONFIG_BMI160_SPI is not set +# CONFIG_KMX61 is not set +# CONFIG_INV_MPU6050_I2C is not set +# CONFIG_INV_MPU6050_SPI is not set + +# +# Light sensors +# +# CONFIG_ACPI_ALS is not set +# CONFIG_ADJD_S311 is not set +# CONFIG_AL3320A is not set +# CONFIG_APDS9300 is not set +# CONFIG_APDS9960 is not set +# CONFIG_BH1750 is not set +# CONFIG_BH1780 is not set +# CONFIG_CM32181 is not set +# CONFIG_CM3232 is not set +# CONFIG_CM3323 is not set +# CONFIG_CM36651 is not set +# CONFIG_GP2AP020A00F is not set +# CONFIG_ISL29125 is not set +# CONFIG_JSA1212 is not set +# CONFIG_RPR0521 is not set +# CONFIG_LTR501 is not set +# CONFIG_MAX44000 is not set +# CONFIG_OPT3001 is not set +# CONFIG_PA12203001 is not set +# CONFIG_SI1145 is not set +# CONFIG_STK3310 is not set +# CONFIG_TCS3414 is not set +# CONFIG_TCS3472 is not set +# CONFIG_SENSORS_TSL2563 is not set +# CONFIG_TSL4531 is not set +# CONFIG_US5182D is not set +# CONFIG_VCNL4000 is not set +# CONFIG_VEML6070 is not set + +# +# Magnetometer sensors +# +# CONFIG_AK8974 is not set +# CONFIG_AK8975 is not set +# CONFIG_AK09911 is not set +# CONFIG_BMC150_MAGN_I2C is not set +# CONFIG_BMC150_MAGN_SPI is not set +# CONFIG_MAG3110 is not set +# CONFIG_MMC35240 is not set +# CONFIG_IIO_ST_MAGN_3AXIS is not set +# CONFIG_SENSORS_HMC5843_I2C is not set +# CONFIG_SENSORS_HMC5843_SPI is not set + +# +# Inclinometer sensors +# + +# +# Digital potentiometers +# +# CONFIG_DS1803 is not set +# CONFIG_MAX5487 is not set +# CONFIG_MCP4131 is not set +# CONFIG_MCP4531 is not set +# CONFIG_TPL0102 is not set + +# +# Pressure sensors +# +# CONFIG_BMP280 is not set +# CONFIG_HP03 is not set +# CONFIG_MPL115_I2C is not set +# CONFIG_MPL115_SPI is not set +# CONFIG_MPL3115 is not set +# CONFIG_MS5611 is not set +# CONFIG_MS5637 is not set +# CONFIG_IIO_ST_PRESS is not set +# CONFIG_T5403 is not set +# CONFIG_HP206C is not set +# CONFIG_ZPA2326 is not set + +# +# Lightning sensors +# +# CONFIG_AS3935 is not set + +# +# Proximity sensors +# +# CONFIG_LIDAR_LITE_V2 is not set +# CONFIG_SX9500 is not set + +# +# Temperature sensors +# +# CONFIG_MAXIM_THERMOCOUPLE is not set +# CONFIG_MLX90614 is not set +# CONFIG_TMP006 is not set +# CONFIG_TSYS01 is not set +# CONFIG_TSYS02D is not set +# CONFIG_NTB is not set +# CONFIG_VME_BUS is not set +CONFIG_PWM=y +CONFIG_PWM_SYSFS=y +# CONFIG_PWM_BCM_IPROC is not set +# CONFIG_PWM_BERLIN is not set +# CONFIG_PWM_CROS_EC is not set +# CONFIG_PWM_FSL_FTM is not set +# CONFIG_PWM_MESON is not set +# CONFIG_PWM_MTK_DISP is not set +# CONFIG_PWM_PCA9685 is not set +CONFIG_PWM_RCAR=y +# CONFIG_PWM_RENESAS_TPU is not set +# CONFIG_PWM_ROCKCHIP is not set +CONFIG_PWM_SAMSUNG=y +# CONFIG_PWM_SUN4I is not set +CONFIG_PWM_TEGRA=m +CONFIG_IRQCHIP=y +CONFIG_ARM_GIC=y +CONFIG_ARM_GIC_MAX_NR=1 +CONFIG_ARM_GIC_V2M=y +CONFIG_ARM_GIC_V3=y +CONFIG_ARM_GIC_V3_ITS=y +CONFIG_ALPINE_MSI=y +CONFIG_DW_APB_ICTL=y +CONFIG_HISILICON_IRQ_MBIGEN=y +CONFIG_RENESAS_IRQC=y +CONFIG_MVEBU_ODMI=y +CONFIG_MVEBU_PIC=y +CONFIG_LS_SCFG_MSI=y +CONFIG_PARTITION_PERCPU=y +# CONFIG_IPACK_BUS is not set +CONFIG_ARCH_HAS_RESET_CONTROLLER=y +CONFIG_RESET_CONTROLLER=y +# CONFIG_RESET_ATH79 is not set +CONFIG_RESET_BERLIN=y +# CONFIG_RESET_LPC18XX is not set +CONFIG_RESET_MESON=y +# CONFIG_RESET_PISTACHIO is not set +# CONFIG_RESET_SOCFPGA is not set +# CONFIG_RESET_STM32 is not set +CONFIG_RESET_SUNXI=y +# CONFIG_TI_SYSCON_RESET is not set +CONFIG_RESET_UNIPHIER=y +# CONFIG_RESET_ZYNQ is not set +CONFIG_COMMON_RESET_HI6220=y +# CONFIG_FMC is not set + +# +# PHY Subsystem +# +CONFIG_GENERIC_PHY=y +# CONFIG_PHY_BCM_NS_USB2 is not set +# CONFIG_PHY_BCM_NS_USB3 is not set +# CONFIG_PHY_BERLIN_USB is not set +# CONFIG_PHY_BERLIN_SATA is not set +CONFIG_PHY_EXYNOS_MIPI_VIDEO=y +# CONFIG_PHY_PXA_28NM_HSIC is not set +# CONFIG_PHY_PXA_28NM_USB2 is not set +# CONFIG_PHY_RCAR_GEN2 is not set +CONFIG_PHY_RCAR_GEN3_USB2=y +CONFIG_PHY_EXYNOS_DP_VIDEO=y +# CONFIG_BCM_KONA_USB2_PHY is not set +# CONFIG_PHY_MT65XX_USB3 is not set +CONFIG_PHY_HI6220_USB=y +# CONFIG_PHY_SUN4I_USB is not set +# CONFIG_PHY_SUN9I_USB is not set +CONFIG_PHY_SAMSUNG_USB2=y +# CONFIG_PHY_EXYNOS4210_USB2 is not set +# CONFIG_PHY_EXYNOS4X12_USB2 is not set +# CONFIG_PHY_EXYNOS5250_USB2 is not set +CONFIG_PHY_EXYNOS5_USBDRD=y +# CONFIG_PHY_QCOM_APQ8064_SATA is not set +# CONFIG_PHY_QCOM_IPQ806X_SATA is not set +# CONFIG_PHY_ROCKCHIP_USB is not set +# CONFIG_PHY_ROCKCHIP_INNO_USB2 is not set +# CONFIG_PHY_ROCKCHIP_EMMC is not set +# CONFIG_PHY_ROCKCHIP_DP is not set +# CONFIG_PHY_ROCKCHIP_PCIE is not set +# CONFIG_PHY_ROCKCHIP_TYPEC is not set +CONFIG_PHY_XGENE=y +# CONFIG_PHY_QCOM_UFS is not set +CONFIG_PHY_BRCM_SATA=y +CONFIG_PHY_TEGRA_XUSB=y +CONFIG_PHY_NS2_PCIE=y +# CONFIG_POWERCAP is not set +# CONFIG_MCB is not set + +# +# Performance monitor support +# +CONFIG_ARM_PMU=y +# CONFIG_XGENE_PMU is not set +CONFIG_RAS=y +# CONFIG_THUNDERBOLT is not set + +# +# Android +# +# CONFIG_ANDROID is not set +# CONFIG_LIBNVDIMM is not set +# CONFIG_DEV_DAX is not set +# CONFIG_NVMEM is not set +# CONFIG_STM is not set +# CONFIG_INTEL_TH is not set + +# +# FPGA Configuration Support +# +# CONFIG_FPGA is not set + +# +# Firmware Drivers +# +CONFIG_ARM_PSCI_FW=y +CONFIG_ARM_SCPI_PROTOCOL=y +CONFIG_ARM_SCPI_POWER_DOMAIN=y +# CONFIG_FIRMWARE_MEMMAP is not set +CONFIG_DMIID=y +# CONFIG_DMI_SYSFS is not set +# CONFIG_FW_CFG_SYSFS is not set +CONFIG_QCOM_SCM=y +CONFIG_QCOM_SCM_64=y +CONFIG_HAVE_ARM_SMCCC=y + +# +# EFI (Extensible Firmware Interface) Support +# +# CONFIG_EFI_VARS is not set +CONFIG_EFI_ESRT=y +CONFIG_EFI_PARAMS_FROM_FDT=y +CONFIG_EFI_RUNTIME_WRAPPERS=y +CONFIG_EFI_ARMSTUB=y +# CONFIG_EFI_CAPSULE_LOADER is not set +# CONFIG_EFI_TEST is not set +CONFIG_MESON_SM=y +CONFIG_ACPI=y +CONFIG_ACPI_GENERIC_GSI=y +CONFIG_ACPI_CCA_REQUIRED=y +# CONFIG_ACPI_DEBUGGER is not set +CONFIG_ACPI_SPCR_TABLE=y +# CONFIG_ACPI_EC_DEBUGFS is not set +CONFIG_ACPI_BUTTON=y +CONFIG_ACPI_FAN=y +# CONFIG_ACPI_DOCK is not set +CONFIG_ACPI_PROCESSOR_IDLE=y +CONFIG_ACPI_MCFG=y +CONFIG_ACPI_PROCESSOR=y +CONFIG_ACPI_HOTPLUG_CPU=y +CONFIG_ACPI_THERMAL=y +# CONFIG_ACPI_CUSTOM_DSDT is not set +CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y +CONFIG_ACPI_TABLE_UPGRADE=y +# CONFIG_ACPI_DEBUG is not set +# CONFIG_ACPI_PCI_SLOT is not set +CONFIG_ACPI_CONTAINER=y +# CONFIG_ACPI_HED is not set +# CONFIG_ACPI_CUSTOM_METHOD is not set +CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y +# CONFIG_PMIC_OPREGION is not set +# CONFIG_ACPI_CONFIGFS is not set +CONFIG_ACPI_IORT=y + +# +# File systems +# +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y +# CONFIG_EXT4_FS_SECURITY is not set +# CONFIG_EXT4_ENCRYPTION is not set +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_BTRFS_FS=m +CONFIG_BTRFS_FS_POSIX_ACL=y +# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set +# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set +# CONFIG_BTRFS_DEBUG is not set +# CONFIG_BTRFS_ASSERT is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_F2FS_FS is not set +# CONFIG_FS_DAX is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_EXPORTFS=y +# CONFIG_EXPORTFS_BLOCK_OPS is not set +CONFIG_FILE_LOCKING=y +CONFIG_MANDATORY_FILE_LOCKING=y +# CONFIG_FS_ENCRYPTION is not set +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_FANOTIFY=y +CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QUOTA_DEBUG is not set +# CONFIG_QFMT_V1 is not set +# CONFIG_QFMT_V2 is not set +CONFIG_QUOTACTL=y +CONFIG_AUTOFS4_FS=y +CONFIG_FUSE_FS=m +CONFIG_CUSE=m +CONFIG_OVERLAY_FS=m + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_FAT_DEFAULT_UTF8 is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_PROC_CHILDREN is not set +CONFIG_KERNFS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_TMPFS_XATTR is not set +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_ARCH_HAS_GIGANTIC_PAGE=y +CONFIG_CONFIGFS_FS=y +CONFIG_EFIVAR_FS=y +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ORANGEFS_FS is not set +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_LOGFS is not set +# CONFIG_CRAMFS is not set +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_FILE_CACHE=y +# CONFIG_SQUASHFS_FILE_DIRECT is not set +CONFIG_SQUASHFS_DECOMP_SINGLE=y +# CONFIG_SQUASHFS_DECOMP_MULTI is not set +# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set +# CONFIG_SQUASHFS_XATTR is not set +CONFIG_SQUASHFS_ZLIB=y +# CONFIG_SQUASHFS_LZ4 is not set +# CONFIG_SQUASHFS_LZO is not set +# CONFIG_SQUASHFS_XZ is not set +# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_QNX6FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_PSTORE is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V2=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_SWAP is not set +CONFIG_NFS_V4_1=y +CONFIG_NFS_V4_2=y +CONFIG_PNFS_FILE_LAYOUT=y +CONFIG_PNFS_FLEXFILE_LAYOUT=m +CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" +# CONFIG_NFS_V4_1_MIGRATION is not set +CONFIG_NFS_V4_SECURITY_LABEL=y +CONFIG_ROOT_NFS=y +# CONFIG_NFS_USE_LEGACY_DNS is not set +CONFIG_NFS_USE_KERNEL_DNS=y +# CONFIG_NFSD is not set +CONFIG_GRACE_PERIOD=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_SUNRPC_BACKCHANNEL=y +# CONFIG_SUNRPC_DEBUG is not set +# CONFIG_CEPH_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +CONFIG_9P_FS=y +# CONFIG_9P_FS_POSIX_ACL is not set +# CONFIG_9P_FS_SECURITY is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_MAC_ROMAN is not set +# CONFIG_NLS_MAC_CELTIC is not set +# CONFIG_NLS_MAC_CENTEURO is not set +# CONFIG_NLS_MAC_CROATIAN is not set +# CONFIG_NLS_MAC_CYRILLIC is not set +# CONFIG_NLS_MAC_GAELIC is not set +# CONFIG_NLS_MAC_GREEK is not set +# CONFIG_NLS_MAC_ICELAND is not set +# CONFIG_NLS_MAC_INUIT is not set +# CONFIG_NLS_MAC_ROMANIAN is not set +# CONFIG_NLS_MAC_TURKISH is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set +CONFIG_HAVE_KVM_IRQCHIP=y +CONFIG_HAVE_KVM_IRQFD=y +CONFIG_HAVE_KVM_IRQ_ROUTING=y +CONFIG_HAVE_KVM_EVENTFD=y +CONFIG_KVM_MMIO=y +CONFIG_HAVE_KVM_MSI=y +CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y +CONFIG_KVM_VFIO=y +CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL=y +CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y +CONFIG_KVM_COMPAT=y +CONFIG_VIRTUALIZATION=y +CONFIG_KVM_ARM_VGIC_V3_ITS=y +CONFIG_KVM=y +CONFIG_KVM_ARM_HOST=y +CONFIG_KVM_ARM_PMU=y +# CONFIG_VHOST_NET is not set +# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set + +# +# Kernel hacking +# + +# +# printk and dmesg options +# +CONFIG_PRINTK_TIME=y +CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DYNAMIC_DEBUG is not set + +# +# Compile-time checks and compiler options +# +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_INFO_REDUCED is not set +# CONFIG_DEBUG_INFO_SPLIT is not set +# CONFIG_DEBUG_INFO_DWARF4 is not set +# CONFIG_GDB_SCRIPTS is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=2048 +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_READABLE_ASM is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_PAGE_OWNER is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_SECTION_MISMATCH is not set +CONFIG_SECTION_MISMATCH_WARN_ONLY=y +CONFIG_ARCH_WANT_FRAME_POINTERS=y +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 +CONFIG_DEBUG_KERNEL=y + +# +# Memory Debugging +# +# CONFIG_PAGE_EXTENSION is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PAGE_POISONING is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +CONFIG_HAVE_DEBUG_KMEMLEAK=y +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_VM is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_PER_CPU_MAPS is not set +CONFIG_HAVE_ARCH_KASAN=y +# CONFIG_KASAN is not set +CONFIG_ARCH_HAS_KCOV=y +# CONFIG_KCOV is not set +# CONFIG_DEBUG_SHIRQ is not set + +# +# Debug Lockups and Hangs +# +CONFIG_LOCKUP_DETECTOR=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_WQ_WATCHDOG is not set +# CONFIG_PANIC_ON_OOPS is not set +CONFIG_PANIC_ON_OOPS_VALUE=0 +CONFIG_PANIC_TIMEOUT=0 +# CONFIG_SCHED_DEBUG is not set +CONFIG_SCHED_INFO=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_SCHED_STACK_END_CHECK is not set +# CONFIG_DEBUG_TIMEKEEPING is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_PREEMPT is not set + +# +# Lock Debugging (spinlocks, mutexes, etc...) +# +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_ATOMIC_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_LOCK_TORTURE_TEST is not set +# CONFIG_STACKTRACE is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_HAVE_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_PI_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set + +# +# RCU Debugging +# +# CONFIG_PROVE_RCU is not set +# CONFIG_SPARSE_RCU_POINTER is not set +# CONFIG_TORTURE_TEST is not set +# CONFIG_RCU_PERF_TEST is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_RCU_CPU_STALL_TIMEOUT=21 +# CONFIG_RCU_TRACE is not set +# CONFIG_RCU_EQS_DEBUG is not set +# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set +# CONFIG_NOTIFIER_ERROR_INJECTION is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set + +# +# Runtime Testing +# +# CONFIG_LKDTM is not set +# CONFIG_TEST_LIST_SORT is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_RBTREE_TEST is not set +# CONFIG_INTERVAL_TREE_TEST is not set +# CONFIG_PERCPU_TEST is not set +# CONFIG_ATOMIC64_SELFTEST is not set +# CONFIG_TEST_HEXDUMP is not set +# CONFIG_TEST_STRING_HELPERS is not set +# CONFIG_TEST_KSTRTOX is not set +# CONFIG_TEST_PRINTF is not set +# CONFIG_TEST_BITMAP is not set +# CONFIG_TEST_UUID is not set +# CONFIG_TEST_RHASHTABLE is not set +# CONFIG_TEST_HASH is not set +# CONFIG_DMA_API_DEBUG is not set +# CONFIG_TEST_LKM is not set +# CONFIG_TEST_USER_COPY is not set +# CONFIG_TEST_BPF is not set +# CONFIG_TEST_FIRMWARE is not set +# CONFIG_TEST_UDELAY is not set +CONFIG_MEMTEST=y +# CONFIG_TEST_STATIC_KEYS is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y +# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set +# CONFIG_UBSAN is not set +CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y +# CONFIG_STRICT_DEVMEM is not set +# CONFIG_ARM64_PTDUMP is not set +# CONFIG_PID_IN_CONTEXTIDR is not set +# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set +CONFIG_DEBUG_SET_MODULE_RONX=y +# CONFIG_DEBUG_ALIGN_RODATA is not set +# CONFIG_CORESIGHT is not set + +# +# Security options +# +CONFIG_KEYS=y +# CONFIG_PERSISTENT_KEYRINGS is not set +# CONFIG_BIG_KEYS is not set +# CONFIG_ENCRYPTED_KEYS is not set +# CONFIG_KEY_DH_OPERATIONS is not set +# CONFIG_SECURITY_DMESG_RESTRICT is not set +CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set +CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y +CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y +# CONFIG_HARDENED_USERCOPY is not set +# CONFIG_SECURITY_SMACK is not set +# CONFIG_SECURITY_TOMOYO is not set +# CONFIG_SECURITY_APPARMOR is not set +# CONFIG_SECURITY_LOADPIN is not set +# CONFIG_SECURITY_YAMA is not set +CONFIG_INTEGRITY=y +# CONFIG_INTEGRITY_SIGNATURE is not set +CONFIG_INTEGRITY_AUDIT=y +# CONFIG_IMA is not set +# CONFIG_EVM is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_XOR_BLOCKS=m +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_RNG_DEFAULT=y +CONFIG_CRYPTO_AKCIPHER2=y +CONFIG_CRYPTO_KPP2=y +# CONFIG_CRYPTO_RSA is not set +# CONFIG_CRYPTO_DH is not set +# CONFIG_CRYPTO_ECDH is not set +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_USER is not set +CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=y +CONFIG_CRYPTO_NULL2=y +# CONFIG_CRYPTO_PCRYPT is not set +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_CRYPTD=y +# CONFIG_CRYPTO_MCRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set +CONFIG_CRYPTO_ABLK_HELPER=y + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +# CONFIG_CRYPTO_CHACHA20POLY1305 is not set +CONFIG_CRYPTO_SEQIV=m +CONFIG_CRYPTO_ECHAINIV=y + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +CONFIG_CRYPTO_CTR=m +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_KEYWRAP is not set + +# +# Hash modes +# +CONFIG_CRYPTO_CMAC=m +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_CRC32 is not set +CONFIG_CRYPTO_CRCT10DIF=y +CONFIG_CRYPTO_GHASH=m +# CONFIG_CRYPTO_POLY1305 is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +CONFIG_CRYPTO_SHA256=y +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_SHA3 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_CHACHA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +# CONFIG_CRYPTO_842 is not set +# CONFIG_CRYPTO_LZ4 is not set +# CONFIG_CRYPTO_LZ4HC is not set + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=y +CONFIG_CRYPTO_DRBG_MENU=y +CONFIG_CRYPTO_DRBG_HMAC=y +# CONFIG_CRYPTO_DRBG_HASH is not set +# CONFIG_CRYPTO_DRBG_CTR is not set +CONFIG_CRYPTO_DRBG=y +CONFIG_CRYPTO_JITTERENTROPY=y +# CONFIG_CRYPTO_USER_API_HASH is not set +# CONFIG_CRYPTO_USER_API_SKCIPHER is not set +# CONFIG_CRYPTO_USER_API_RNG is not set +# CONFIG_CRYPTO_USER_API_AEAD is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_MARVELL_CESA is not set +# CONFIG_CRYPTO_DEV_FSL_CAAM is not set +# CONFIG_CRYPTO_DEV_S5P is not set +# CONFIG_CRYPTO_DEV_CCP is not set +# CONFIG_CRYPTO_DEV_QCE is not set +# CONFIG_CRYPTO_DEV_ROCKCHIP is not set +# CONFIG_ASYMMETRIC_KEY_TYPE is not set + +# +# Certificates for signature checking +# +CONFIG_ARM64_CRYPTO=y +CONFIG_CRYPTO_SHA1_ARM64_CE=y +CONFIG_CRYPTO_SHA2_ARM64_CE=y +CONFIG_CRYPTO_GHASH_ARM64_CE=y +CONFIG_CRYPTO_AES_ARM64_CE=y +CONFIG_CRYPTO_AES_ARM64_CE_CCM=y +CONFIG_CRYPTO_AES_ARM64_CE_BLK=y +# CONFIG_CRYPTO_AES_ARM64_NEON_BLK is not set +CONFIG_CRYPTO_CRC32_ARM64=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_RAID6_PQ=m +CONFIG_BITREVERSE=y +CONFIG_HAVE_ARCH_BITREVERSE=y +CONFIG_RATIONAL=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GENERIC_NET_UTILS=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_IO=y +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y +# CONFIG_CRC_CCITT is not set +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +# CONFIG_CRC32_SELFTEST is not set +CONFIG_CRC32_SLICEBY8=y +# CONFIG_CRC32_SLICEBY4 is not set +# CONFIG_CRC32_SARWATE is not set +# CONFIG_CRC32_BIT is not set +CONFIG_CRC7=y +# CONFIG_LIBCRC32C is not set +# CONFIG_CRC8 is not set +CONFIG_AUDIT_GENERIC=y +CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y +CONFIG_AUDIT_COMPAT_GENERIC=y +# CONFIG_RANDOM32_SELFTEST is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_LZ4_DECOMPRESS=y +CONFIG_XZ_DEC=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_BCJ=y +# CONFIG_XZ_DEC_TEST is not set +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_XZ=y +CONFIG_DECOMPRESS_LZO=y +CONFIG_DECOMPRESS_LZ4=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_RADIX_TREE_MULTIORDER=y +CONFIG_ASSOCIATIVE_ARRAY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +CONFIG_HAS_DMA=y +CONFIG_CPU_RMAP=y +CONFIG_DQL=y +CONFIG_GLOB=y +# CONFIG_GLOB_SELFTEST is not set +CONFIG_NLATTR=y +# CONFIG_CORDIC is not set +# CONFIG_DDR is not set +# CONFIG_IRQ_POLL is not set +CONFIG_LIBFDT=y +CONFIG_OID_REGISTRY=y +CONFIG_UCS2_STRING=y +CONFIG_FONT_SUPPORT=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_SG_SPLIT is not set +CONFIG_SG_POOL=y +CONFIG_ARCH_HAS_SG_CHAIN=y +CONFIG_SBITMAP=y diff --git a/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/h3ulcb/touch.cfg b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/h3ulcb/touch.cfg new file mode 100644 index 0000000..327c753 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/h3ulcb/touch.cfg @@ -0,0 +1 @@ +CONFIG_HID_MULTITOUCH=y diff --git a/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/h3ulcb/usb-video-class.cfg b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/h3ulcb/usb-video-class.cfg new file mode 100644 index 0000000..7446787 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/h3ulcb/usb-video-class.cfg @@ -0,0 +1,68 @@ +CONFIG_MEDIA_USB_SUPPORT=y + +# +# Webcam devices +# +CONFIG_USB_VIDEO_CLASS=y +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=m +# CONFIG_USB_M5602 is not set +# CONFIG_USB_STV06XX is not set +# CONFIG_USB_GL860 is not set +# CONFIG_USB_GSPCA_BENQ is not set +# CONFIG_USB_GSPCA_CONEX is not set +# CONFIG_USB_GSPCA_CPIA1 is not set +# CONFIG_USB_GSPCA_DTCS033 is not set +# CONFIG_USB_GSPCA_ETOMS is not set +# CONFIG_USB_GSPCA_FINEPIX is not set +# CONFIG_USB_GSPCA_JEILINJ is not set +# CONFIG_USB_GSPCA_JL2005BCD is not set +# CONFIG_USB_GSPCA_KINECT is not set +# CONFIG_USB_GSPCA_KONICA is not set +# CONFIG_USB_GSPCA_MARS is not set +# CONFIG_USB_GSPCA_MR97310A is not set +# CONFIG_USB_GSPCA_NW80X is not set +# CONFIG_USB_GSPCA_OV519 is not set +# CONFIG_USB_GSPCA_OV534 is not set +# CONFIG_USB_GSPCA_OV534_9 is not set +# CONFIG_USB_GSPCA_PAC207 is not set +# CONFIG_USB_GSPCA_PAC7302 is not set +# CONFIG_USB_GSPCA_PAC7311 is not set +# CONFIG_USB_GSPCA_SE401 is not set +# CONFIG_USB_GSPCA_SN9C2028 is not set +# CONFIG_USB_GSPCA_SN9C20X is not set +# CONFIG_USB_GSPCA_SONIXB is not set +# CONFIG_USB_GSPCA_SONIXJ is not set +# CONFIG_USB_GSPCA_SPCA500 is not set +# CONFIG_USB_GSPCA_SPCA501 is not set +# CONFIG_USB_GSPCA_SPCA505 is not set +# CONFIG_USB_GSPCA_SPCA506 is not set +# CONFIG_USB_GSPCA_SPCA508 is not set +# CONFIG_USB_GSPCA_SPCA561 is not set +# CONFIG_USB_GSPCA_SPCA1528 is not set +# CONFIG_USB_GSPCA_SQ905 is not set +# CONFIG_USB_GSPCA_SQ905C is not set +# CONFIG_USB_GSPCA_SQ930X is not set +# CONFIG_USB_GSPCA_STK014 is not set +# CONFIG_USB_GSPCA_STK1135 is not set +# CONFIG_USB_GSPCA_STV0680 is not set +# CONFIG_USB_GSPCA_SUNPLUS is not set +# CONFIG_USB_GSPCA_T613 is not set +# CONFIG_USB_GSPCA_TOPRO is not set +# CONFIG_USB_GSPCA_TOUPTEK is not set +# CONFIG_USB_GSPCA_TV8532 is not set +# CONFIG_USB_GSPCA_VC032X is not set +# CONFIG_USB_GSPCA_VICAM is not set +# CONFIG_USB_GSPCA_XIRLINK_CIT is not set +# CONFIG_USB_GSPCA_ZC3XX is not set +# CONFIG_USB_PWC is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_USB_ZR364XX is not set +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set +# CONFIG_VIDEO_USBTV is not set + +# +# Webcam, TV (analog/digital) USB devices +# +# CONFIG_VIDEO_EM28XX is not set diff --git a/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/m3ulcb/defconfig b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/m3ulcb/defconfig new file mode 100644 index 0000000..6547d0f --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/m3ulcb/defconfig @@ -0,0 +1,5695 @@ +# +# Automatically generated file; DO NOT EDIT. +# Linux/arm64 4.9.0 Kernel Configuration +# +CONFIG_ARM64=y +CONFIG_64BIT=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y +CONFIG_MMU=y +CONFIG_DEBUG_RODATA=y +CONFIG_ARM64_PAGE_SHIFT=12 +CONFIG_ARM64_CONT_SHIFT=4 +CONFIG_ARCH_MMAP_RND_BITS_MIN=18 +CONFIG_ARCH_MMAP_RND_BITS_MAX=33 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16 +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CSUM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_HAVE_GENERIC_RCU_GUP=y +CONFIG_ARCH_DMA_ADDR_T_64BIT=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_SG_DMA_LENGTH=y +CONFIG_SMP=y +CONFIG_SWIOTLB=y +CONFIG_IOMMU_HELPER=y +CONFIG_KERNEL_MODE_NEON=y +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_PGTABLE_LEVELS=4 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_IRQ_WORK=y +CONFIG_BUILDTIME_EXTABLE_SORT=y + +# +# General setup +# +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_CROSS_COMPILE="" +# CONFIG_COMPILE_TEST is not set +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_DEFAULT_HOSTNAME="(none)" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_CROSS_MEMORY_ATTACH=y +CONFIG_FHANDLE=y +# CONFIG_USELIB is not set +CONFIG_AUDIT=y +CONFIG_HAVE_ARCH_AUDITSYSCALL=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_WATCH=y +CONFIG_AUDIT_TREE=y + +# +# IRQ subsystem +# +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y +CONFIG_GENERIC_IRQ_MIGRATION=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_DOMAIN_HIERARCHY=y +CONFIG_GENERIC_MSI_IRQ=y +CONFIG_GENERIC_MSI_IRQ_DOMAIN=y +CONFIG_HANDLE_DOMAIN_IRQ=y +# CONFIG_IRQ_DOMAIN_DEBUG is not set +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_SPARSE_IRQ=y +CONFIG_ARCH_CLOCKSOURCE_DATA=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_ARCH_HAS_TICK_BROADCAST=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y + +# +# Timers subsystem +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ_COMMON=y +# CONFIG_HZ_PERIODIC is not set +CONFIG_NO_HZ_IDLE=y +# CONFIG_NO_HZ_FULL is not set +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y + +# +# CPU/Task time and stats accounting +# +CONFIG_TICK_CPU_ACCOUNTING=y +# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set +# CONFIG_IRQ_TIME_ACCOUNTING is not set +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y + +# +# RCU Subsystem +# +CONFIG_PREEMPT_RCU=y +# CONFIG_RCU_EXPERT is not set +CONFIG_SRCU=y +# CONFIG_TASKS_RCU is not set +CONFIG_RCU_STALL_COMMON=y +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_RCU_EXPEDITE_BOOT is not set +CONFIG_BUILD_BIN2C=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y +CONFIG_CGROUPS=y +CONFIG_PAGE_COUNTER=y +CONFIG_MEMCG=y +CONFIG_MEMCG_SWAP=y +CONFIG_MEMCG_SWAP_ENABLED=y +CONFIG_BLK_CGROUP=y +# CONFIG_DEBUG_BLK_CGROUP is not set +CONFIG_CGROUP_WRITEBACK=y +CONFIG_CGROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_CFS_BANDWIDTH is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_CGROUP_PIDS=y +# CONFIG_CGROUP_FREEZER is not set +CONFIG_CGROUP_HUGETLB=y +CONFIG_CPUSETS=y +CONFIG_PROC_PID_CPUSET=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_CGROUP_PERF=y +# CONFIG_CGROUP_DEBUG is not set +# CONFIG_CHECKPOINT_RESTORE is not set +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y +CONFIG_NET_NS=y +CONFIG_SCHED_AUTOGROUP=y +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_XZ=y +CONFIG_RD_LZO=y +CONFIG_RD_LZ4=y +CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_HAVE_UID16=y +CONFIG_SYSCTL_EXCEPTION_TRACE=y +CONFIG_BPF=y +# CONFIG_EXPERT is not set +CONFIG_UID16=y +CONFIG_MULTIUSER=y +# CONFIG_SGETMASK_SYSCALL is not set +CONFIG_SYSFS_SYSCALL=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set +CONFIG_KALLSYMS_BASE_RELATIVE=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +# CONFIG_BPF_SYSCALL is not set +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_ADVISE_SYSCALLS=y +# CONFIG_USERFAULTFD is not set +CONFIG_PCI_QUIRKS=y +CONFIG_MEMBARRIER=y +# CONFIG_EMBEDDED is not set +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +CONFIG_PERF_EVENTS=y +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_COMPAT_BRK is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLAB_FREELIST_RANDOM is not set +CONFIG_SLUB_CPU_PARTIAL=y +# CONFIG_SYSTEM_DATA_VERIFICATION is not set +CONFIG_PROFILING=y +CONFIG_KEXEC_CORE=y +# CONFIG_KPROBES is not set +CONFIG_JUMP_LABEL=y +# CONFIG_STATIC_KEYS_SELFTEST is not set +# CONFIG_UPROBES is not set +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_HW_BREAKPOINT=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_RCU_TABLE_FREE=y +CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y +CONFIG_HAVE_CMPXCHG_LOCAL=y +CONFIG_HAVE_CMPXCHG_DOUBLE=y +CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_SECCOMP_FILTER=y +CONFIG_HAVE_GCC_PLUGINS=y +# CONFIG_GCC_PLUGINS is not set +CONFIG_HAVE_CC_STACKPROTECTOR=y +# CONFIG_CC_STACKPROTECTOR is not set +CONFIG_CC_STACKPROTECTOR_NONE=y +# CONFIG_CC_STACKPROTECTOR_REGULAR is not set +# CONFIG_CC_STACKPROTECTOR_STRONG is not set +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y +CONFIG_HAVE_ARCH_HUGE_VMAP=y +CONFIG_MODULES_USE_ELF_RELA=y +CONFIG_ARCH_HAS_ELF_RANDOMIZE=y +CONFIG_HAVE_ARCH_MMAP_RND_BITS=y +CONFIG_ARCH_MMAP_RND_BITS=18 +CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y +CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11 +# CONFIG_HAVE_ARCH_HASH is not set +# CONFIG_ISA_BUS_API is not set +CONFIG_CLONE_BACKWARDS=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_COMPAT_OLD_SIGACTION=y +# CONFIG_CPU_NO_EFFICIENT_FFS is not set +# CONFIG_HAVE_ARCH_VMAP_STACK is not set + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_MODULE_SIG is not set +# CONFIG_MODULE_COMPRESS is not set +# CONFIG_TRIM_UNUSED_KSYMS is not set +CONFIG_MODULES_TREE_LOOKUP=y +CONFIG_BLOCK=y +CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_BSGLIB is not set +CONFIG_BLK_DEV_INTEGRITY=y +# CONFIG_BLK_DEV_THROTTLING is not set +# CONFIG_BLK_CMDLINE_PARSER is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_EFI_PARTITION=y +CONFIG_BLOCK_COMPAT=y +CONFIG_BLK_MQ_PCI=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_CFQ_GROUP_IOSCHED is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_PREEMPT_NOTIFIERS=y +CONFIG_UNINLINE_SPIN_UNLOCK=y +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +CONFIG_LOCK_SPIN_ON_OWNER=y +CONFIG_FREEZER=y + +# +# Platform selection +# +CONFIG_ARCH_SUNXI=y +CONFIG_ARCH_ALPINE=y +# CONFIG_ARCH_BCM2835 is not set +CONFIG_ARCH_BCM_IPROC=y +CONFIG_ARCH_BERLIN=y +# CONFIG_ARCH_BRCMSTB is not set +CONFIG_ARCH_EXYNOS=y +CONFIG_ARCH_LAYERSCAPE=y +CONFIG_ARCH_LG1K=y +CONFIG_ARCH_HISI=y +CONFIG_ARCH_MEDIATEK=y +CONFIG_ARCH_MESON=y +CONFIG_ARCH_MVEBU=y +CONFIG_ARCH_QCOM=y +CONFIG_ARCH_ROCKCHIP=y +CONFIG_ARCH_SEATTLE=y +CONFIG_ARCH_SHMOBILE=y +CONFIG_ARCH_RENESAS=y +CONFIG_ARCH_R8A7795=y +CONFIG_ARCH_R8A7796=y +CONFIG_ARCH_STRATIX10=y +CONFIG_ARCH_TEGRA=y +CONFIG_ARCH_SPRD=y +CONFIG_ARCH_THUNDER=y +CONFIG_ARCH_UNIPHIER=y +CONFIG_ARCH_VEXPRESS=y +CONFIG_ARCH_VULCAN=y +CONFIG_ARCH_XGENE=y +CONFIG_ARCH_ZX=y +CONFIG_ARCH_ZYNQMP=y + +# +# Bus support +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_DOMAINS_GENERIC=y +CONFIG_PCI_SYSCALL=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCIEAER=y +# CONFIG_PCIE_ECRC is not set +# CONFIG_PCIEAER_INJECT is not set +CONFIG_PCIEASPM=y +# CONFIG_PCIEASPM_DEBUG is not set +CONFIG_PCIEASPM_DEFAULT=y +# CONFIG_PCIEASPM_POWERSAVE is not set +# CONFIG_PCIEASPM_PERFORMANCE is not set +CONFIG_PCIE_PME=y +# CONFIG_PCIE_DPC is not set +# CONFIG_PCIE_PTM is not set +CONFIG_PCI_BUS_ADDR_T_64BIT=y +CONFIG_PCI_MSI=y +CONFIG_PCI_MSI_IRQ_DOMAIN=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set +# CONFIG_PCI_STUB is not set +CONFIG_PCI_ATS=y +CONFIG_PCI_ECAM=y +CONFIG_PCI_IOV=y +# CONFIG_PCI_PRI is not set +# CONFIG_PCI_PASID is not set +CONFIG_PCI_LABEL=y +# CONFIG_HOTPLUG_PCI is not set + +# +# PCI host controller drivers +# +CONFIG_PCI_AARDVARK=y +# CONFIG_PCIE_XILINX_NWL is not set +# CONFIG_PCIE_DW_PLAT is not set +CONFIG_PCIE_DW=y +CONFIG_PCIE_RCAR=y +CONFIG_PCI_HOST_COMMON=y +CONFIG_PCI_HOST_GENERIC=y +CONFIG_PCI_XGENE=y +CONFIG_PCI_XGENE_MSI=y +CONFIG_PCI_LAYERSCAPE=y +CONFIG_PCIE_IPROC=y +CONFIG_PCIE_IPROC_PLATFORM=y +CONFIG_PCIE_IPROC_MSI=y +CONFIG_PCI_HISI=y +CONFIG_PCIE_QCOM=y +# CONFIG_PCI_HOST_THUNDER_PEM is not set +# CONFIG_PCI_HOST_THUNDER_ECAM is not set +CONFIG_PCIE_ARMADA_8K=y +# CONFIG_PCIE_ROCKCHIP is not set + +# +# Kernel Features +# + +# +# ARM errata workarounds via the alternatives framework +# +CONFIG_ARM64_ERRATUM_826319=y +CONFIG_ARM64_ERRATUM_827319=y +CONFIG_ARM64_ERRATUM_824069=y +CONFIG_ARM64_ERRATUM_819472=y +CONFIG_ARM64_ERRATUM_832075=y +CONFIG_ARM64_ERRATUM_834220=y +CONFIG_ARM64_ERRATUM_845719=y +CONFIG_ARM64_ERRATUM_843419=y +CONFIG_CAVIUM_ERRATUM_22375=y +CONFIG_CAVIUM_ERRATUM_23154=y +CONFIG_CAVIUM_ERRATUM_27456=y +CONFIG_ARM64_4K_PAGES=y +# CONFIG_ARM64_16K_PAGES is not set +# CONFIG_ARM64_64K_PAGES is not set +# CONFIG_ARM64_VA_BITS_39 is not set +CONFIG_ARM64_VA_BITS_48=y +CONFIG_ARM64_VA_BITS=48 +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SCHED_MC=y +# CONFIG_SCHED_SMT is not set +CONFIG_NR_CPUS=64 +CONFIG_HOTPLUG_CPU=y +# CONFIG_NUMA is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_PREEMPT_COUNT=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_HAVE_ARCH_PFN_VALID=y +CONFIG_HW_PERF_EVENTS=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y +CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y +CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_SPARSEMEM_VMEMMAP=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_NO_BOOTMEM=y +CONFIG_MEMORY_ISOLATION=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MEMORY_BALLOON=y +CONFIG_BALLOON_COMPACTION=y +CONFIG_COMPACTION=y +CONFIG_MIGRATION=y +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_BOUNCE=y +CONFIG_MMU_NOTIFIER=y +CONFIG_KSM=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y +# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set +CONFIG_TRANSPARENT_HUGE_PAGECACHE=y +# CONFIG_CLEANCACHE is not set +# CONFIG_FRONTSWAP is not set +CONFIG_CMA=y +# CONFIG_CMA_DEBUG is not set +# CONFIG_CMA_DEBUGFS is not set +CONFIG_CMA_AREAS=7 +# CONFIG_ZPOOL is not set +# CONFIG_ZBUD is not set +# CONFIG_ZSMALLOC is not set +CONFIG_GENERIC_EARLY_IOREMAP=y +# CONFIG_IDLE_PAGE_TRACKING is not set +CONFIG_FRAME_VECTOR=y +CONFIG_SECCOMP=y +CONFIG_PARAVIRT=y +# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set +CONFIG_KEXEC=y +CONFIG_XEN_DOM0=y +CONFIG_XEN=y +CONFIG_FORCE_MAX_ZONEORDER=11 +# CONFIG_ARMV8_DEPRECATED is not set + +# +# ARMv8.1 architectural features +# +CONFIG_ARM64_HW_AFDBM=y +CONFIG_ARM64_PAN=y +# CONFIG_ARM64_LSE_ATOMICS is not set +CONFIG_ARM64_VHE=y + +# +# ARMv8.2 architectural features +# +CONFIG_ARM64_UAO=y +CONFIG_ARM64_MODULE_CMODEL_LARGE=y +# CONFIG_RANDOMIZE_BASE is not set + +# +# Boot options +# +# CONFIG_ARM64_ACPI_PARKING_PROTOCOL is not set +CONFIG_CMDLINE="" +# CONFIG_CMDLINE_FORCE is not set +CONFIG_EFI_STUB=y +CONFIG_EFI=y +CONFIG_DMI=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_COMPAT_BINFMT_ELF=y +CONFIG_ELFCORE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_BINFMT_SCRIPT=y +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_COREDUMP=y +CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y + +# +# Power management options +# +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_HIBERNATION is not set +CONFIG_PM_SLEEP=y +CONFIG_PM_SLEEP_SMP=y +# CONFIG_PM_AUTOSLEEP is not set +# CONFIG_PM_WAKELOCKS is not set +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_OPP=y +CONFIG_PM_CLK=y +CONFIG_PM_GENERIC_DOMAINS=y +# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set +CONFIG_PM_GENERIC_DOMAINS_SLEEP=y +CONFIG_PM_GENERIC_DOMAINS_OF=y +CONFIG_CPU_PM=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# CPU Power Management +# + +# +# CPU Idle +# +CONFIG_CPU_IDLE=y +# CONFIG_CPU_IDLE_GOV_LADDER is not set +CONFIG_CPU_IDLE_GOV_MENU=y +CONFIG_DT_IDLE_STATES=y + +# +# ARM CPU Idle Drivers +# +CONFIG_ARM_CPUIDLE=y +# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_GOV_ATTR_SET=y +CONFIG_CPU_FREQ_GOV_COMMON=y +# CONFIG_CPU_FREQ_STAT is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y + +# +# CPU frequency scaling drivers +# +CONFIG_CPUFREQ_DT=y +CONFIG_CPUFREQ_DT_PLATDEV=y +CONFIG_ARM_BIG_LITTLE_CPUFREQ=y +# CONFIG_ARM_DT_BL_CPUFREQ is not set +# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set +# CONFIG_ARM_MT8173_CPUFREQ is not set +CONFIG_ARM_SCPI_CPUFREQ=y +CONFIG_ARM_TEGRA20_CPUFREQ=y +CONFIG_ARM_TEGRA124_CPUFREQ=y +# CONFIG_ACPI_CPPC_CPUFREQ is not set +CONFIG_NET=y +CONFIG_NET_INGRESS=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_DIAG is not set +CONFIG_UNIX=y +# CONFIG_UNIX_DIAG is not set +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE_DEMUX is not set +CONFIG_NET_IP_TUNNEL=m +# CONFIG_IP_MROUTE is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_NET_IPVTI is not set +# CONFIG_NET_UDP_TUNNEL is not set +# CONFIG_NET_FOU is not set +# CONFIG_NET_FOU_IP_TUNNELS is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_INET_UDP_DIAG is not set +# CONFIG_INET_DIAG_DESTROY is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_IPV6_ILA is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +# CONFIG_IPV6_VTI is not set +CONFIG_IPV6_SIT=m +# CONFIG_IPV6_SIT_6RD is not set +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_FOU is not set +# CONFIG_IPV6_FOU_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NET_PTP_CLASSIFY=y +# CONFIG_NETWORK_PHY_TIMESTAMPING is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=m + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_INGRESS=y +# CONFIG_NETFILTER_NETLINK_ACCT is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +CONFIG_NF_CONNTRACK=m +CONFIG_NF_LOG_COMMON=m +# CONFIG_NF_CONNTRACK_MARK is not set +CONFIG_NF_CONNTRACK_PROCFS=y +CONFIG_NF_CONNTRACK_EVENTS=y +# CONFIG_NF_CONNTRACK_TIMEOUT is not set +# CONFIG_NF_CONNTRACK_TIMESTAMP is not set +# CONFIG_NF_CT_PROTO_DCCP is not set +# CONFIG_NF_CT_PROTO_SCTP is not set +# CONFIG_NF_CT_PROTO_UDPLITE is not set +# CONFIG_NF_CONNTRACK_AMANDA is not set +# CONFIG_NF_CONNTRACK_FTP is not set +# CONFIG_NF_CONNTRACK_H323 is not set +# CONFIG_NF_CONNTRACK_IRC is not set +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +# CONFIG_NF_CONNTRACK_SNMP is not set +# CONFIG_NF_CONNTRACK_PPTP is not set +# CONFIG_NF_CONNTRACK_SANE is not set +# CONFIG_NF_CONNTRACK_SIP is not set +# CONFIG_NF_CONNTRACK_TFTP is not set +# CONFIG_NF_CT_NETLINK is not set +# CONFIG_NF_CT_NETLINK_TIMEOUT is not set +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +# CONFIG_NF_NAT_AMANDA is not set +# CONFIG_NF_NAT_FTP is not set +# CONFIG_NF_NAT_IRC is not set +# CONFIG_NF_NAT_SIP is not set +# CONFIG_NF_NAT_TFTP is not set +# CONFIG_NF_NAT_REDIRECT is not set +# CONFIG_NF_TABLES is not set +CONFIG_NETFILTER_XTABLES=m + +# +# Xtables combined modules +# +# CONFIG_NETFILTER_XT_MARK is not set +# CONFIG_NETFILTER_XT_CONNMARK is not set + +# +# Xtables targets +# +# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_HL is not set +# CONFIG_NETFILTER_XT_TARGET_HMARK is not set +# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set +# CONFIG_NETFILTER_XT_TARGET_LED is not set +CONFIG_NETFILTER_XT_TARGET_LOG=m +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +CONFIG_NETFILTER_XT_NAT=m +# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set +# CONFIG_NETFILTER_XT_TARGET_TEE is not set +# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set + +# +# Xtables matches +# +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +# CONFIG_NETFILTER_XT_MATCH_BPF is not set +# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set +# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set +# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set +# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +# CONFIG_NETFILTER_XT_MATCH_CPU is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ECN is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_HELPER is not set +# CONFIG_NETFILTER_XT_MATCH_HL is not set +# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set +# CONFIG_NETFILTER_XT_MATCH_L2TP is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set +# CONFIG_NETFILTER_XT_MATCH_STATE is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_IP_SET is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +# CONFIG_NF_DUP_IPV4 is not set +# CONFIG_NF_LOG_ARP is not set +CONFIG_NF_LOG_IPV4=m +CONFIG_NF_REJECT_IPV4=m +CONFIG_NF_NAT_IPV4=m +CONFIG_NF_NAT_MASQUERADE_IPV4=m +# CONFIG_NF_NAT_PPTP is not set +# CONFIG_NF_NAT_H323 is not set +CONFIG_IP_NF_IPTABLES=m +# CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_RPFILTER is not set +# CONFIG_IP_NF_MATCH_TTL is not set +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +# CONFIG_IP_NF_TARGET_SYNPROXY is not set +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_TARGET_MASQUERADE=m +# CONFIG_IP_NF_TARGET_NETMAP is not set +# CONFIG_IP_NF_TARGET_REDIRECT is not set +CONFIG_IP_NF_MANGLE=m +# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +# CONFIG_IP_NF_TARGET_ECN is not set +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_RAW is not set +# CONFIG_IP_NF_SECURITY is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV6=m +CONFIG_NF_CONNTRACK_IPV6=m +# CONFIG_NF_DUP_IPV6 is not set +CONFIG_NF_REJECT_IPV6=m +CONFIG_NF_LOG_IPV6=m +CONFIG_NF_NAT_IPV6=m +CONFIG_NF_NAT_MASQUERADE_IPV6=m +CONFIG_IP6_NF_IPTABLES=m +# CONFIG_IP6_NF_MATCH_AH is not set +# CONFIG_IP6_NF_MATCH_EUI64 is not set +# CONFIG_IP6_NF_MATCH_FRAG is not set +# CONFIG_IP6_NF_MATCH_OPTS is not set +# CONFIG_IP6_NF_MATCH_HL is not set +# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set +# CONFIG_IP6_NF_MATCH_MH is not set +# CONFIG_IP6_NF_MATCH_RPFILTER is not set +# CONFIG_IP6_NF_MATCH_RT is not set +# CONFIG_IP6_NF_TARGET_HL is not set +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +# CONFIG_IP6_NF_TARGET_SYNPROXY is not set +CONFIG_IP6_NF_MANGLE=m +# CONFIG_IP6_NF_RAW is not set +# CONFIG_IP6_NF_SECURITY is not set +CONFIG_IP6_NF_NAT=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +# CONFIG_IP6_NF_TARGET_NPT is not set +# CONFIG_BRIDGE_NF_EBTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_L2TP is not set +CONFIG_STP=m +CONFIG_GARP=m +CONFIG_MRP=m +CONFIG_BRIDGE=m +CONFIG_BRIDGE_IGMP_SNOOPING=y +CONFIG_BRIDGE_VLAN_FILTERING=y +CONFIG_HAVE_NET_DSA=y +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_VLAN_8021Q_MVRP=y +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_PHONET is not set +# CONFIG_6LOWPAN is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set +CONFIG_DNS_RESOLVER=y +# CONFIG_BATMAN_ADV is not set +# CONFIG_OPENVSWITCH is not set +# CONFIG_VSOCKETS is not set +# CONFIG_NETLINK_DIAG is not set +# CONFIG_MPLS is not set +# CONFIG_HSR is not set +# CONFIG_NET_SWITCHDEV is not set +# CONFIG_NET_L3_MASTER_DEV is not set +# CONFIG_QRTR is not set +# CONFIG_NET_NCSI is not set +CONFIG_RPS=y +CONFIG_RFS_ACCEL=y +CONFIG_XPS=y +# CONFIG_SOCK_CGROUP_DATA is not set +# CONFIG_CGROUP_NET_PRIO is not set +# CONFIG_CGROUP_NET_CLASSID is not set +CONFIG_NET_RX_BUSY_POLL=y +CONFIG_BQL=y +CONFIG_BPF_JIT=y +CONFIG_NET_FLOW_LIMIT=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_BREDR=y +# CONFIG_BT_RFCOMM is not set +# CONFIG_BT_BNEP is not set +CONFIG_BT_HIDP=m +# CONFIG_BT_HS is not set +# CONFIG_BT_LE is not set +CONFIG_BT_LEDS=y +# CONFIG_BT_SELFTEST is not set +# CONFIG_BT_DEBUGFS is not set + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIBTUSB is not set +# CONFIG_BT_HCIBTSDIO is not set +CONFIG_BT_HCIUART=m +# CONFIG_BT_HCIUART_H4 is not set +# CONFIG_BT_HCIUART_BCSP is not set +# CONFIG_BT_HCIUART_ATH3K is not set +CONFIG_BT_HCIUART_LL=y +# CONFIG_BT_HCIUART_3WIRE is not set +# CONFIG_BT_HCIUART_INTEL is not set +# CONFIG_BT_HCIUART_BCM is not set +# CONFIG_BT_HCIUART_QCA is not set +# CONFIG_BT_HCIUART_AG6XX is not set +# CONFIG_BT_HCIUART_MRVL is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_BT_MRVL is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_AF_KCM is not set +# CONFIG_STREAM_PARSER is not set +CONFIG_WIRELESS=y +CONFIG_CFG80211=m +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +CONFIG_CFG80211_DEFAULT_PS=y +# CONFIG_CFG80211_DEBUGFS is not set +# CONFIG_CFG80211_INTERNAL_REGDB is not set +CONFIG_CFG80211_CRDA_SUPPORT=y +# CONFIG_CFG80211_WEXT is not set +# CONFIG_LIB80211 is not set +CONFIG_MAC80211=m +CONFIG_MAC80211_HAS_RC=y +CONFIG_MAC80211_RC_MINSTREL=y +CONFIG_MAC80211_RC_MINSTREL_HT=y +# CONFIG_MAC80211_RC_MINSTREL_VHT is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_MESSAGE_TRACING is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 +# CONFIG_WIMAX is not set +CONFIG_RFKILL=m +CONFIG_RFKILL_LEDS=y +CONFIG_RFKILL_INPUT=y +# CONFIG_RFKILL_REGULATOR is not set +# CONFIG_RFKILL_GPIO is not set +CONFIG_NET_9P=y +CONFIG_NET_9P_VIRTIO=y +# CONFIG_NET_9P_DEBUG is not set +# CONFIG_CAIF is not set +# CONFIG_CEPH_LIB is not set +# CONFIG_NFC is not set +# CONFIG_LWTUNNEL is not set +CONFIG_DST_CACHE=y +# CONFIG_NET_DEVLINK is not set +CONFIG_MAY_USE_DEVLINK=y +CONFIG_HAVE_EBPF_JIT=y + +# +# Device Drivers +# +CONFIG_ARM_AMBA=y +CONFIG_TEGRA_AHB=y + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set +CONFIG_ALLOW_DEV_COREDUMP=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set +CONFIG_SYS_HYPERVISOR=y +# CONFIG_GENERIC_CPU_DEVICES is not set +CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_SOC_BUS=y +CONFIG_REGMAP=y +CONFIG_REGMAP_I2C=y +CONFIG_REGMAP_SPI=y +CONFIG_REGMAP_SPMI=y +CONFIG_REGMAP_MMIO=y +CONFIG_REGMAP_IRQ=y +CONFIG_DMA_SHARED_BUFFER=y +# CONFIG_FENCE_TRACE is not set +CONFIG_DMA_CMA=y + +# +# Default contiguous memory area size: +# +CONFIG_CMA_SIZE_MBYTES=16 +CONFIG_CMA_SIZE_SEL_MBYTES=y +# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set +# CONFIG_CMA_SIZE_SEL_MIN is not set +# CONFIG_CMA_SIZE_SEL_MAX is not set +CONFIG_CMA_ALIGNMENT=8 + +# +# Bus devices +# +# CONFIG_ARM_CCI400_PMU is not set +# CONFIG_ARM_CCI5xx_PMU is not set +# CONFIG_ARM_CCN is not set +# CONFIG_QCOM_EBI2 is not set +# CONFIG_SIMPLE_PM_BUS is not set +# CONFIG_SUNXI_RSB is not set +# CONFIG_TEGRA_ACONNECT is not set +CONFIG_UNIPHIER_SYSTEM_BUS=y +CONFIG_VEXPRESS_CONFIG=y +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_SM_FTL is not set +# CONFIG_MTD_OOPS is not set +# CONFIG_MTD_SWAP is not set +# CONFIG_MTD_PARTITIONED_MASTER is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_DATAFLASH is not set +CONFIG_MTD_M25P80=y +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOCG3 is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR & LPDDR2 PCM memory drivers +# +# CONFIG_MTD_LPDDR is not set +CONFIG_MTD_SPI_NOR=y +# CONFIG_MTD_MT81xx_NOR is not set +CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y +# CONFIG_SPI_FSL_QUADSPI is not set +# CONFIG_SPI_HISI_SFC is not set +# CONFIG_MTD_UBI is not set +CONFIG_DTC=y +CONFIG_OF=y +# CONFIG_OF_UNITTEST is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_ADDRESS_PCI=y +CONFIG_OF_IRQ=y +CONFIG_OF_NET=y +CONFIG_OF_MDIO=y +CONFIG_OF_PCI=y +CONFIG_OF_PCI_IRQ=y +CONFIG_OF_RESERVED_MEM=y +# CONFIG_OF_OVERLAY is not set +# CONFIG_PARPORT is not set +CONFIG_PNP=y +CONFIG_PNP_DEBUG_MESSAGES=y + +# +# Protocols +# +CONFIG_PNPACPI=y +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_NULL_BLK is not set +# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_DRBD is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SKD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_XEN_BLKDEV_FRONTEND=y +# CONFIG_XEN_BLKDEV_BACKEND is not set +CONFIG_VIRTIO_BLK=y +# CONFIG_BLK_DEV_RBD is not set +# CONFIG_BLK_DEV_RSXX is not set +# CONFIG_BLK_DEV_NVME is not set +# CONFIG_NVME_TARGET is not set + +# +# Misc devices +# +# CONFIG_SENSORS_LIS3LV02D is not set +# CONFIG_AD525X_DPOT is not set +# CONFIG_DUMMY_IRQ is not set +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_QCOM_COINCELL is not set +# CONFIG_APDS9802ALS is not set +# CONFIG_ISL29003 is not set +# CONFIG_ISL29020 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_SENSORS_BH1770 is not set +# CONFIG_SENSORS_APDS990X is not set +# CONFIG_HMC6352 is not set +# CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set +# CONFIG_USB_SWITCH_FSA9480 is not set +# CONFIG_LATTICE_ECP3_CONFIG is not set +CONFIG_SRAM=y +CONFIG_VEXPRESS_SYSCFG=y +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_EEPROM_93XX46 is not set +# CONFIG_CB710_CORE is not set + +# +# Texas Instruments shared transport line discipline +# +# CONFIG_TI_ST is not set +# CONFIG_SENSORS_LIS3_I2C is not set + +# +# Altera FPGA firmware download module +# +# CONFIG_ALTERA_STAPL is not set + +# +# Intel MIC Bus Driver +# + +# +# SCIF Bus Driver +# + +# +# VOP Bus Driver +# + +# +# Intel MIC Host Driver +# + +# +# Intel MIC Card Driver +# + +# +# SCIF Driver +# + +# +# Intel MIC Coprocessor State Management (COSM) Drivers +# + +# +# VOP Driver +# +# CONFIG_GENWQE is not set +# CONFIG_ECHO is not set +# CONFIG_CXL_BASE is not set +# CONFIG_CXL_AFU_DRIVER_OPS is not set + +# +# SCSI device support +# +CONFIG_SCSI_MOD=y +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_MQ_DEFAULT is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_SAS_ATTRS=y +CONFIG_SCSI_SAS_LIBSAS=y +CONFIG_SCSI_SAS_ATA=y +CONFIG_SCSI_SAS_HOST_SMP=y +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_ISCSI_BOOT_SYSFS is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_CXGB4_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +CONFIG_SCSI_HISI_SAS=y +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_MVUMI is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_SCSI_ESAS2R is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT3SAS is not set +# CONFIG_SCSI_MPT2SAS is not set +# CONFIG_SCSI_SMARTPQI is not set +# CONFIG_SCSI_UFSHCD is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_XEN_SCSI_FRONTEND is not set +# CONFIG_SCSI_SNIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_AM53C974 is not set +# CONFIG_SCSI_WD719X is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set +# CONFIG_SCSI_VIRTIO is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +CONFIG_HAVE_PATA_PLATFORM=y +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y +CONFIG_ATA_ACPI=y +# CONFIG_SATA_ZPODD is not set +CONFIG_SATA_PMP=y + +# +# Controllers with non-SFF native interface +# +CONFIG_SATA_AHCI=y +CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_AHCI_CEVA=y +CONFIG_AHCI_MVEBU=y +# CONFIG_AHCI_SUNXI is not set +# CONFIG_AHCI_TEGRA is not set +CONFIG_AHCI_XGENE=y +CONFIG_AHCI_QORIQ=y +# CONFIG_SATA_AHCI_SEATTLE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_SATA_ACARD_AHCI is not set +CONFIG_SATA_SIL24=y +CONFIG_ATA_SFF=y + +# +# SFF controllers with custom DMA interface +# +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_SX4 is not set +CONFIG_ATA_BMDMA=y + +# +# SATA SFF controllers with BMDMA +# +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_DWC is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_SATA_PROMISE is not set +CONFIG_SATA_RCAR=y +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_SVW is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set + +# +# PATA SFF controllers with BMDMA +# +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_ATP867X is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set +# CONFIG_PATA_SCH is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set + +# +# PIO-only SFF controllers +# +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +CONFIG_PATA_PLATFORM=y +CONFIG_PATA_OF_PLATFORM=y +# CONFIG_PATA_RZ1000 is not set + +# +# Generic fallback / legacy drivers +# +# CONFIG_PATA_ACPI is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_LEGACY is not set +# CONFIG_MD is not set +# CONFIG_TARGET_CORE is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_FIREWIRE_NOSY is not set +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_NET_CORE=y +# CONFIG_BONDING is not set +# CONFIG_DUMMY is not set +# CONFIG_EQUALIZER is not set +# CONFIG_NET_FC is not set +# CONFIG_NET_TEAM is not set +CONFIG_MACVLAN=m +CONFIG_MACVTAP=m +# CONFIG_VXLAN is not set +# CONFIG_MACSEC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +CONFIG_TUN=y +# CONFIG_TUN_VNET_CROSS_LE is not set +CONFIG_VETH=m +CONFIG_VIRTIO_NET=y +# CONFIG_NLMON is not set +# CONFIG_ARCNET is not set + +# +# CAIF transport drivers +# + +# +# Distributed Switch Architecture drivers +# +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_3COM=y +# CONFIG_VORTEX is not set +# CONFIG_TYPHOON is not set +CONFIG_NET_VENDOR_ADAPTEC=y +# CONFIG_ADAPTEC_STARFIRE is not set +CONFIG_NET_VENDOR_AGERE=y +# CONFIG_ET131X is not set +CONFIG_NET_VENDOR_ALLWINNER=y +# CONFIG_SUN4I_EMAC is not set +CONFIG_NET_VENDOR_ALTEON=y +# CONFIG_ACENIC is not set +# CONFIG_ALTERA_TSE is not set +CONFIG_NET_VENDOR_AMAZON=y +CONFIG_NET_VENDOR_AMD=y +# CONFIG_AMD8111_ETH is not set +# CONFIG_PCNET32 is not set +CONFIG_AMD_XGBE=y +CONFIG_NET_XGENE=y +CONFIG_NET_VENDOR_ARC=y +# CONFIG_ARC_EMAC is not set +# CONFIG_EMAC_ROCKCHIP is not set +CONFIG_NET_VENDOR_ATHEROS=y +# CONFIG_ATL2 is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_ALX is not set +# CONFIG_NET_VENDOR_AURORA is not set +CONFIG_NET_CADENCE=y +CONFIG_MACB=y +CONFIG_NET_VENDOR_BROADCOM=y +# CONFIG_B44 is not set +# CONFIG_BCMGENET is not set +# CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2X is not set +CONFIG_BGMAC=y +CONFIG_BGMAC_PLATFORM=y +# CONFIG_SYSTEMPORT is not set +# CONFIG_BNXT is not set +CONFIG_NET_VENDOR_BROCADE=y +# CONFIG_BNA is not set +CONFIG_NET_VENDOR_CAVIUM=y +# CONFIG_THUNDER_NIC_PF is not set +# CONFIG_THUNDER_NIC_VF is not set +# CONFIG_THUNDER_NIC_BGX is not set +# CONFIG_THUNDER_NIC_RGX is not set +# CONFIG_LIQUIDIO is not set +CONFIG_NET_VENDOR_CHELSIO=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_CHELSIO_T4 is not set +# CONFIG_CHELSIO_T4VF is not set +CONFIG_NET_VENDOR_CISCO=y +# CONFIG_ENIC is not set +# CONFIG_DNET is not set +CONFIG_NET_VENDOR_DEC=y +# CONFIG_NET_TULIP is not set +CONFIG_NET_VENDOR_DLINK=y +# CONFIG_DL2K is not set +# CONFIG_SUNDANCE is not set +CONFIG_NET_VENDOR_EMULEX=y +# CONFIG_BE2NET is not set +CONFIG_NET_VENDOR_EZCHIP=y +# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set +CONFIG_NET_VENDOR_EXAR=y +# CONFIG_S2IO is not set +# CONFIG_VXGE is not set +CONFIG_NET_VENDOR_FREESCALE=y +# CONFIG_FSL_PQ_MDIO is not set +# CONFIG_FSL_XGMAC_MDIO is not set +# CONFIG_GIANFAR is not set +CONFIG_NET_VENDOR_HISILICON=y +# CONFIG_HIX5HD2_GMAC is not set +# CONFIG_HISI_FEMAC is not set +# CONFIG_HIP04_ETH is not set +CONFIG_HNS_MDIO=y +CONFIG_HNS=y +CONFIG_HNS_DSAF=y +CONFIG_HNS_ENET=y +CONFIG_NET_VENDOR_HP=y +# CONFIG_HP100 is not set +CONFIG_NET_VENDOR_INTEL=y +# CONFIG_E100 is not set +# CONFIG_E1000 is not set +CONFIG_E1000E=y +CONFIG_IGB=y +CONFIG_IGB_HWMON=y +CONFIG_IGBVF=y +# CONFIG_IXGB is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGBEVF is not set +# CONFIG_I40E is not set +# CONFIG_I40EVF is not set +# CONFIG_FM10K is not set +CONFIG_NET_VENDOR_I825XX=y +# CONFIG_JME is not set +CONFIG_NET_VENDOR_MARVELL=y +# CONFIG_MVMDIO is not set +# CONFIG_MVNETA_BM is not set +# CONFIG_PXA168_ETH is not set +# CONFIG_SKGE is not set +CONFIG_SKY2=y +# CONFIG_SKY2_DEBUG is not set +# CONFIG_NET_VENDOR_MEDIATEK is not set +CONFIG_NET_VENDOR_MELLANOX=y +# CONFIG_MLX4_EN is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_MLX5_CORE is not set +# CONFIG_MLXSW_CORE is not set +CONFIG_NET_VENDOR_MICREL=y +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_KSZ884X_PCI is not set +CONFIG_NET_VENDOR_MICROCHIP=y +# CONFIG_ENC28J60 is not set +# CONFIG_ENCX24J600 is not set +CONFIG_NET_VENDOR_MYRI=y +# CONFIG_MYRI10GE is not set +# CONFIG_FEALNX is not set +CONFIG_NET_VENDOR_NATSEMI=y +# CONFIG_NATSEMI is not set +# CONFIG_NS83820 is not set +CONFIG_NET_VENDOR_NETRONOME=y +# CONFIG_NFP_NETVF is not set +CONFIG_NET_VENDOR_8390=y +# CONFIG_NE2K_PCI is not set +CONFIG_NET_VENDOR_NVIDIA=y +# CONFIG_FORCEDETH is not set +CONFIG_NET_VENDOR_OKI=y +# CONFIG_ETHOC is not set +CONFIG_NET_PACKET_ENGINE=y +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_NET_VENDOR_QLOGIC=y +# CONFIG_QLA3XXX is not set +# CONFIG_QLCNIC is not set +# CONFIG_QLGE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_QED is not set +CONFIG_NET_VENDOR_QUALCOMM=y +# CONFIG_QCA7000 is not set +# CONFIG_QCOM_EMAC is not set +CONFIG_NET_VENDOR_REALTEK=y +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_R8169 is not set +CONFIG_NET_VENDOR_RENESAS=y +# CONFIG_SH_ETH is not set +CONFIG_RAVB=y +CONFIG_NET_VENDOR_RDC=y +# CONFIG_R6040 is not set +CONFIG_NET_VENDOR_ROCKER=y +CONFIG_NET_VENDOR_SAMSUNG=y +# CONFIG_SXGBE_ETH is not set +CONFIG_NET_VENDOR_SEEQ=y +CONFIG_NET_VENDOR_SILAN=y +# CONFIG_SC92031 is not set +CONFIG_NET_VENDOR_SIS=y +# CONFIG_SIS900 is not set +# CONFIG_SIS190 is not set +# CONFIG_SFC is not set +CONFIG_NET_VENDOR_SMSC=y +CONFIG_SMC91X=y +# CONFIG_EPIC100 is not set +CONFIG_SMSC911X=y +# CONFIG_SMSC911X_ARCH_HOOKS is not set +# CONFIG_SMSC9420 is not set +CONFIG_NET_VENDOR_STMICRO=y +CONFIG_STMMAC_ETH=m +CONFIG_STMMAC_PLATFORM=m +CONFIG_DWMAC_GENERIC=m +CONFIG_DWMAC_IPQ806X=m +CONFIG_DWMAC_MESON=m +CONFIG_DWMAC_ROCKCHIP=m +CONFIG_DWMAC_SUNXI=m +# CONFIG_STMMAC_PCI is not set +CONFIG_NET_VENDOR_SUN=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NIU is not set +CONFIG_NET_VENDOR_SYNOPSYS=y +# CONFIG_SYNOPSYS_DWC_ETH_QOS is not set +CONFIG_NET_VENDOR_TEHUTI=y +# CONFIG_TEHUTI is not set +CONFIG_NET_VENDOR_TI=y +# CONFIG_TI_CPSW_ALE is not set +# CONFIG_TLAN is not set +CONFIG_NET_VENDOR_VIA=y +# CONFIG_VIA_RHINE is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_NET_VENDOR_WIZNET=y +# CONFIG_WIZNET_W5100 is not set +# CONFIG_WIZNET_W5300 is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_NET_SB1000 is not set +CONFIG_PHYLIB=y +CONFIG_SWPHY=y + +# +# MDIO bus device drivers +# +# CONFIG_MDIO_BCM_IPROC is not set +# CONFIG_MDIO_BCM_UNIMAC is not set +CONFIG_MDIO_BITBANG=y +CONFIG_MDIO_BUS_MUX=y +CONFIG_MDIO_BUS_MUX_BCM_IPROC=y +# CONFIG_MDIO_BUS_MUX_GPIO is not set +# CONFIG_MDIO_BUS_MUX_MMIOREG is not set +# CONFIG_MDIO_GPIO is not set +# CONFIG_MDIO_HISI_FEMAC is not set +# CONFIG_MDIO_OCTEON is not set +# CONFIG_MDIO_SUN4I is not set +# CONFIG_MDIO_THUNDER is not set +CONFIG_MDIO_XGENE=y + +# +# MII PHY device drivers +# +# CONFIG_AMD_PHY is not set +# CONFIG_AQUANTIA_PHY is not set +# CONFIG_AT803X_PHY is not set +# CONFIG_BCM7XXX_PHY is not set +# CONFIG_BCM87XX_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_DP83848_PHY is not set +# CONFIG_DP83867_PHY is not set +CONFIG_FIXED_PHY=y +# CONFIG_ICPLUS_PHY is not set +# CONFIG_INTEL_XWAY_PHY is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_MARVELL_PHY is not set +CONFIG_MICREL_PHY=y +# CONFIG_MICROCHIP_PHY is not set +# CONFIG_MICROSEMI_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_QSEMI_PHY is not set +CONFIG_REALTEK_PHY=m +# CONFIG_SMSC_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_TERANETICS_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_XILINX_GMII2RGMII is not set +# CONFIG_MICREL_KS8995MA is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +CONFIG_USB_NET_DRIVERS=y +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_RTL8152=m +# CONFIG_USB_LAN78XX is not set +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_AX88179_178A=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_CDC_EEM is not set +CONFIG_USB_NET_CDC_NCM=m +# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set +# CONFIG_USB_NET_CDC_MBIM is not set +CONFIG_USB_NET_DM9601=m +# CONFIG_USB_NET_SR9700 is not set +CONFIG_USB_NET_SR9800=m +CONFIG_USB_NET_SMSC75XX=m +CONFIG_USB_NET_SMSC95XX=m +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +# CONFIG_USB_NET_RNDIS_HOST is not set +CONFIG_USB_NET_CDC_SUBSET_ENABLE=m +CONFIG_USB_NET_CDC_SUBSET=m +# CONFIG_USB_ALI_M5632 is not set +# CONFIG_USB_AN2720 is not set +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +# CONFIG_USB_EPSON2888 is not set +# CONFIG_USB_KC2190 is not set +CONFIG_USB_NET_ZAURUS=m +# CONFIG_USB_NET_CX82310_ETH is not set +# CONFIG_USB_NET_KALMIA is not set +# CONFIG_USB_NET_QMI_WWAN is not set +# CONFIG_USB_HSO is not set +# CONFIG_USB_NET_INT51X1 is not set +# CONFIG_USB_IPHETH is not set +# CONFIG_USB_SIERRA_NET is not set +# CONFIG_USB_VL600 is not set +# CONFIG_USB_NET_CH9200 is not set +CONFIG_WLAN=y +CONFIG_WLAN_VENDOR_ADMTEK=y +# CONFIG_ADM8211 is not set +CONFIG_WLAN_VENDOR_ATH=y +# CONFIG_ATH_DEBUG is not set +# CONFIG_ATH5K is not set +# CONFIG_ATH5K_PCI is not set +# CONFIG_ATH9K is not set +# CONFIG_ATH9K_HTC is not set +# CONFIG_CARL9170 is not set +# CONFIG_ATH6KL is not set +# CONFIG_AR5523 is not set +# CONFIG_WIL6210 is not set +# CONFIG_ATH10K is not set +# CONFIG_WCN36XX is not set +CONFIG_WLAN_VENDOR_ATMEL=y +# CONFIG_ATMEL is not set +# CONFIG_AT76C50X_USB is not set +CONFIG_WLAN_VENDOR_BROADCOM=y +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_BRCMSMAC is not set +# CONFIG_BRCMFMAC is not set +CONFIG_WLAN_VENDOR_CISCO=y +CONFIG_WLAN_VENDOR_INTEL=y +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_IWL4965 is not set +# CONFIG_IWL3945 is not set +# CONFIG_IWLWIFI is not set +CONFIG_WLAN_VENDOR_INTERSIL=y +# CONFIG_HOSTAP is not set +# CONFIG_HERMES is not set +# CONFIG_P54_COMMON is not set +# CONFIG_PRISM54 is not set +CONFIG_WLAN_VENDOR_MARVELL=y +# CONFIG_LIBERTAS is not set +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_MWIFIEX is not set +# CONFIG_MWL8K is not set +CONFIG_WLAN_VENDOR_MEDIATEK=y +# CONFIG_MT7601U is not set +CONFIG_WLAN_VENDOR_RALINK=y +# CONFIG_RT2X00 is not set +CONFIG_WLAN_VENDOR_REALTEK=y +# CONFIG_RTL8180 is not set +# CONFIG_RTL8187 is not set +CONFIG_RTL_CARDS=m +# CONFIG_RTL8192CE is not set +# CONFIG_RTL8192SE is not set +# CONFIG_RTL8192DE is not set +# CONFIG_RTL8723AE is not set +# CONFIG_RTL8723BE is not set +# CONFIG_RTL8188EE is not set +# CONFIG_RTL8192EE is not set +# CONFIG_RTL8821AE is not set +# CONFIG_RTL8192CU is not set +# CONFIG_RTL8XXXU is not set +CONFIG_WLAN_VENDOR_RSI=y +# CONFIG_RSI_91X is not set +CONFIG_WLAN_VENDOR_ST=y +# CONFIG_CW1200 is not set +CONFIG_WLAN_VENDOR_TI=y +# CONFIG_WL1251 is not set +# CONFIG_WL12XX is not set +CONFIG_WL18XX=m +CONFIG_WLCORE=m +# CONFIG_WLCORE_SPI is not set +CONFIG_WLCORE_SDIO=m +CONFIG_WILINK_PLATFORM_DATA=y +CONFIG_WLAN_VENDOR_ZYDAS=y +# CONFIG_USB_ZD1201 is not set +# CONFIG_ZD1211RW is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +CONFIG_XEN_NETDEV_FRONTEND=y +# CONFIG_XEN_NETDEV_BACKEND is not set +# CONFIG_VMXNET3 is not set +# CONFIG_FUJITSU_ES is not set +# CONFIG_ISDN is not set +# CONFIG_NVM is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_LEDS=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set +# CONFIG_INPUT_MATRIXKMAP is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADC is not set +# CONFIG_KEYBOARD_ADP5588 is not set +# CONFIG_KEYBOARD_ADP5589 is not set +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_QT1070 is not set +# CONFIG_KEYBOARD_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_GPIO_POLLED is not set +# CONFIG_KEYBOARD_TCA6416 is not set +# CONFIG_KEYBOARD_TCA8418 is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_LM8333 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_MCS is not set +# CONFIG_KEYBOARD_MPR121 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_TEGRA is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_SAMSUNG is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_SH_KEYSC is not set +# CONFIG_KEYBOARD_SUN4I_LRADC is not set +# CONFIG_KEYBOARD_OMAP4 is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_CROS_EC is not set +# CONFIG_KEYBOARD_CAP11XX is not set +# CONFIG_KEYBOARD_BCM is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_BYD=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_CYPRESS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +CONFIG_MOUSE_PS2_FOCALTECH=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_CYAPA is not set +# CONFIG_MOUSE_ELAN_I2C is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +# CONFIG_MOUSE_SYNAPTICS_USB is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_AD714X is not set +# CONFIG_INPUT_ATMEL_CAPTOUCH is not set +# CONFIG_INPUT_BMA150 is not set +# CONFIG_INPUT_E3X0_BUTTON is not set +CONFIG_INPUT_PM8941_PWRKEY=y +# CONFIG_INPUT_MMA8450 is not set +# CONFIG_INPUT_MPU3050 is not set +# CONFIG_INPUT_GP2A is not set +# CONFIG_INPUT_GPIO_BEEPER is not set +# CONFIG_INPUT_GPIO_TILT_POLLED is not set +# CONFIG_INPUT_GPIO_DECODER is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_KXTJ9 is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +# CONFIG_INPUT_REGULATOR_HAPTIC is not set +# CONFIG_INPUT_UINPUT is not set +# CONFIG_INPUT_PCF8574 is not set +# CONFIG_INPUT_PWM_BEEPER is not set +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set +# CONFIG_INPUT_ADXL34X is not set +# CONFIG_INPUT_IMS_PCU is not set +# CONFIG_INPUT_CMA3000 is not set +CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y +# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set +# CONFIG_INPUT_DRV260X_HAPTICS is not set +# CONFIG_INPUT_DRV2665_HAPTICS is not set +# CONFIG_INPUT_DRV2667_HAPTICS is not set +CONFIG_INPUT_HISI_POWERKEY=y +# CONFIG_RMI4_CORE is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_AMBAKMI=y +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set +# CONFIG_SERIO_PS2MULT is not set +# CONFIG_SERIO_ARC_PS2 is not set +# CONFIG_SERIO_APBPS2 is not set +# CONFIG_SERIO_SUN4I_PS2 is not set +# CONFIG_USERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_TTY=y +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_VT_CONSOLE_SLEEP=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set +# CONFIG_N_GSM is not set +# CONFIG_TRACE_SINK is not set +CONFIG_DEVMEM=y +CONFIG_DEVKMEM=y + +# +# Serial drivers +# +CONFIG_SERIAL_EARLYCON=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y +CONFIG_SERIAL_8250_PNP=y +# CONFIG_SERIAL_8250_FINTEK is not set +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DMA=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_FSL=y +CONFIG_SERIAL_8250_DW=y +# CONFIG_SERIAL_8250_RT288X is not set +CONFIG_SERIAL_8250_MT6577=y +CONFIG_SERIAL_8250_UNIPHIER=y +# CONFIG_SERIAL_8250_MOXA is not set +CONFIG_SERIAL_OF_PLATFORM=y + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_AMBA_PL010 is not set +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set +CONFIG_SERIAL_MESON=y +CONFIG_SERIAL_MESON_CONSOLE=y +CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_UARTS_4=y +CONFIG_SERIAL_SAMSUNG_UARTS=4 +CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_SERIAL_TEGRA=y +# CONFIG_SERIAL_MAX3100 is not set +# CONFIG_SERIAL_MAX310X is not set +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=11 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +# CONFIG_SERIAL_SH_SCI_EARLYCON is not set +# CONFIG_SERIAL_SH_SCI_DMA is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_MSM=y +CONFIG_SERIAL_MSM_CONSOLE=y +# CONFIG_SERIAL_SCCNXP is not set +# CONFIG_SERIAL_SC16IS7XX is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set +# CONFIG_SERIAL_IFX6X60 is not set +CONFIG_SERIAL_XILINX_PS_UART=y +CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y +# CONFIG_SERIAL_ARC is not set +# CONFIG_SERIAL_RP2 is not set +# CONFIG_SERIAL_FSL_LPUART is not set +# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set +# CONFIG_SERIAL_SPRD is not set +CONFIG_SERIAL_MVEBU_UART=y +CONFIG_SERIAL_MVEBU_CONSOLE=y +CONFIG_SERIAL_MCTRL_GPIO=y +CONFIG_HVC_DRIVER=y +CONFIG_HVC_IRQ=y +CONFIG_HVC_XEN=y +CONFIG_HVC_XEN_FRONTEND=y +# CONFIG_HVC_DCC is not set +CONFIG_VIRTIO_CONSOLE=y +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +CONFIG_HW_RANDOM_IPROC_RNG200=m +# CONFIG_HW_RANDOM_VIRTIO is not set +CONFIG_HW_RANDOM_EXYNOS=m +CONFIG_HW_RANDOM_HISI=m +CONFIG_HW_RANDOM_MSM=m +CONFIG_HW_RANDOM_XGENE=m +CONFIG_HW_RANDOM_MESON=m +CONFIG_HW_RANDOM_CAVIUM=m +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# PCMCIA character devices +# +# CONFIG_RAW_DRIVER is not set +# CONFIG_HPET is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_XILLYBUS is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_ACPI_I2C_OPREGION=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MUX=y + +# +# Multiplexer I2C Chip support +# +# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set +# CONFIG_I2C_MUX_GPIO is not set +# CONFIG_I2C_MUX_PCA9541 is not set +CONFIG_I2C_MUX_PCA954x=y +# CONFIG_I2C_MUX_PINCTRL is not set +# CONFIG_I2C_MUX_REG is not set +# CONFIG_I2C_DEMUX_PINCTRL is not set +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_HIX5HD2 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# ACPI drivers +# +# CONFIG_I2C_SCMI is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_BCM_IPROC=y +# CONFIG_I2C_CADENCE is not set +# CONFIG_I2C_CBUS_GPIO is not set +CONFIG_I2C_DESIGNWARE_CORE=y +CONFIG_I2C_DESIGNWARE_PLATFORM=y +# CONFIG_I2C_DESIGNWARE_PCI is not set +# CONFIG_I2C_EMEV2 is not set +CONFIG_I2C_EXYNOS5=y +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_IMX=y +CONFIG_I2C_MESON=y +# CONFIG_I2C_MT65XX is not set +CONFIG_I2C_MV64XXX=y +# CONFIG_I2C_NOMADIK is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_PXA_PCI is not set +CONFIG_I2C_QUP=y +# CONFIG_I2C_RIIC is not set +# CONFIG_I2C_RK3X is not set +CONFIG_I2C_SH_MOBILE=y +# CONFIG_I2C_SIMTEC is not set +CONFIG_I2C_TEGRA=y +# CONFIG_I2C_UNIPHIER is not set +CONFIG_I2C_UNIPHIER_F=y +# CONFIG_I2C_VERSATILE is not set +# CONFIG_I2C_THUNDERX is not set +# CONFIG_I2C_XILINX is not set +# CONFIG_I2C_XLP9XX is not set +CONFIG_I2C_RCAR=y + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_DIOLAN_U2C is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_ROBOTFUZZ_OSIF is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +CONFIG_I2C_CROS_EC_TUNNEL=y +# CONFIG_I2C_XGENE_SLIMPRO is not set +# CONFIG_I2C_STUB is not set +CONFIG_I2C_SLAVE=y +# CONFIG_I2C_SLAVE_EEPROM is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_ALTERA is not set +# CONFIG_SPI_AXI_SPI_ENGINE is not set +CONFIG_SPI_BCM_QSPI=y +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_CADENCE is not set +# CONFIG_SPI_DESIGNWARE is not set +# CONFIG_SPI_GPIO is not set +# CONFIG_SPI_FSL_SPI is not set +# CONFIG_SPI_FSL_DSPI is not set +CONFIG_SPI_MESON_SPIFC=m +# CONFIG_SPI_MT65XX is not set +# CONFIG_SPI_OC_TINY is not set +CONFIG_SPI_ORION=y +CONFIG_SPI_PL022=y +# CONFIG_SPI_PXA2XX is not set +# CONFIG_SPI_PXA2XX_PCI is not set +# CONFIG_SPI_ROCKCHIP is not set +# CONFIG_SPI_RSPI is not set +CONFIG_SPI_QUP=y +CONFIG_SPI_S3C64XX=y +# CONFIG_SPI_SC18IS602 is not set +CONFIG_SPI_SH_MSIOF=y +# CONFIG_SPI_SH_MSIOF_TRANSFER_SYNC_DEBUG is not set +# CONFIG_SPI_SH_HSPI is not set +# CONFIG_SPI_SUN4I is not set +# CONFIG_SPI_SUN6I is not set +# CONFIG_SPI_TEGRA114 is not set +# CONFIG_SPI_TEGRA20_SFLASH is not set +# CONFIG_SPI_TEGRA20_SLINK is not set +# CONFIG_SPI_THUNDERX is not set +# CONFIG_SPI_XCOMM is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_XLP is not set +# CONFIG_SPI_ZYNQMP_GQSPI is not set + +# +# SPI Protocol Masters +# +CONFIG_SPI_SPIDEV=y +# CONFIG_SPI_LOOPBACK_TEST is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_SPMI=y +CONFIG_SPMI_MSM_PMIC_ARB=y +# CONFIG_HSI is not set + +# +# PPS support +# +CONFIG_PPS=y +# CONFIG_PPS_DEBUG is not set + +# +# PPS clients support +# +# CONFIG_PPS_CLIENT_KTIMER is not set +# CONFIG_PPS_CLIENT_LDISC is not set +# CONFIG_PPS_CLIENT_GPIO is not set + +# +# PPS generators support +# + +# +# PTP clock support +# +CONFIG_PTP_1588_CLOCK=y + +# +# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. +# +CONFIG_PINCTRL=y + +# +# Pin controllers +# +CONFIG_PINMUX=y +CONFIG_PINCONF=y +CONFIG_GENERIC_PINCONF=y +# CONFIG_DEBUG_PINCTRL is not set +# CONFIG_PINCTRL_AMD is not set +CONFIG_PINCTRL_MESON=y +CONFIG_PINCTRL_ROCKCHIP=y +CONFIG_PINCTRL_SINGLE=y +CONFIG_PINCTRL_MAX77620=y +CONFIG_PINCTRL_IPROC_GPIO=y +CONFIG_PINCTRL_NS2_MUX=y +# CONFIG_PINCTRL_BERLIN_BG2 is not set +# CONFIG_PINCTRL_BERLIN_BG2CD is not set +# CONFIG_PINCTRL_BERLIN_BG2Q is not set +# CONFIG_PINCTRL_BERLIN_BG4CT is not set +# CONFIG_PINCTRL_BAYTRAIL is not set +# CONFIG_PINCTRL_CHERRYVIEW is not set +# CONFIG_PINCTRL_BROXTON is not set +# CONFIG_PINCTRL_SUNRISEPOINT is not set +CONFIG_PINCTRL_MSM=y +# CONFIG_PINCTRL_APQ8064 is not set +# CONFIG_PINCTRL_APQ8084 is not set +# CONFIG_PINCTRL_IPQ4019 is not set +# CONFIG_PINCTRL_IPQ8064 is not set +# CONFIG_PINCTRL_MSM8660 is not set +# CONFIG_PINCTRL_MSM8960 is not set +# CONFIG_PINCTRL_MDM9615 is not set +# CONFIG_PINCTRL_MSM8X74 is not set +CONFIG_PINCTRL_MSM8916=y +CONFIG_PINCTRL_MSM8996=y +CONFIG_PINCTRL_QDF2XXX=y +CONFIG_PINCTRL_QCOM_SPMI_PMIC=y +# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set +CONFIG_PINCTRL_SAMSUNG=y +CONFIG_PINCTRL_EXYNOS=y +CONFIG_PINCTRL_SH_PFC=y +CONFIG_PINCTRL_PFC_R8A7795=y +CONFIG_PINCTRL_PFC_R8A7796=y +CONFIG_PINCTRL_SUNXI=y +# CONFIG_PINCTRL_SUN4I_A10 is not set +# CONFIG_PINCTRL_SUN5I_A10S is not set +# CONFIG_PINCTRL_SUN5I_A13 is not set +# CONFIG_PINCTRL_GR8 is not set +# CONFIG_PINCTRL_SUN6I_A31 is not set +# CONFIG_PINCTRL_SUN6I_A31S is not set +# CONFIG_PINCTRL_SUN6I_A31_R is not set +# CONFIG_PINCTRL_SUN7I_A20 is not set +# CONFIG_PINCTRL_SUN8I_A23 is not set +# CONFIG_PINCTRL_SUN8I_A33 is not set +# CONFIG_PINCTRL_SUN8I_A83T is not set +# CONFIG_PINCTRL_SUN8I_A23_R is not set +# CONFIG_PINCTRL_SUN8I_H3 is not set +# CONFIG_PINCTRL_SUN8I_H3_R is not set +# CONFIG_PINCTRL_SUN9I_A80 is not set +# CONFIG_PINCTRL_SUN9I_A80_R is not set +CONFIG_PINCTRL_SUN50I_A64=y +CONFIG_PINCTRL_TEGRA=y +CONFIG_PINCTRL_TEGRA124=y +CONFIG_PINCTRL_TEGRA210=y +CONFIG_PINCTRL_TEGRA_XUSB=y +CONFIG_PINCTRL_UNIPHIER=y +# CONFIG_PINCTRL_UNIPHIER_LD4 is not set +# CONFIG_PINCTRL_UNIPHIER_PRO4 is not set +# CONFIG_PINCTRL_UNIPHIER_SLD8 is not set +# CONFIG_PINCTRL_UNIPHIER_PRO5 is not set +# CONFIG_PINCTRL_UNIPHIER_PXS2 is not set +# CONFIG_PINCTRL_UNIPHIER_LD6B is not set +CONFIG_PINCTRL_UNIPHIER_LD11=y +CONFIG_PINCTRL_UNIPHIER_LD20=y +CONFIG_PINCTRL_MTK=y +# CONFIG_PINCTRL_MT2701 is not set +# CONFIG_PINCTRL_MT7623 is not set +# CONFIG_PINCTRL_MT8135 is not set +# CONFIG_PINCTRL_MT8127 is not set +CONFIG_PINCTRL_MT8173=y +# CONFIG_PINCTRL_MT6397 is not set +CONFIG_GPIOLIB=y +CONFIG_OF_GPIO=y +CONFIG_GPIO_ACPI=y +CONFIG_GPIOLIB_IRQCHIP=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_GENERIC=y + +# +# Memory mapped GPIO drivers +# +# CONFIG_GPIO_74XX_MMIO is not set +# CONFIG_GPIO_ALTERA is not set +# CONFIG_GPIO_AMDPT is not set +CONFIG_GPIO_DWAPB=y +CONFIG_GPIO_GENERIC_PLATFORM=y +# CONFIG_GPIO_GRGPIO is not set +# CONFIG_GPIO_MOCKUP is not set +# CONFIG_GPIO_MPC8XXX is not set +CONFIG_GPIO_PL061=y +CONFIG_GPIO_RCAR=y +# CONFIG_GPIO_SYSCON is not set +CONFIG_GPIO_TEGRA=y +# CONFIG_GPIO_VX855 is not set +CONFIG_GPIO_XGENE=y +# CONFIG_GPIO_XGENE_SB is not set +# CONFIG_GPIO_XILINX is not set +# CONFIG_GPIO_XLP is not set +# CONFIG_GPIO_ZYNQ is not set +# CONFIG_GPIO_ZX is not set + +# +# I2C GPIO expanders +# +# CONFIG_GPIO_ADP5588 is not set +# CONFIG_GPIO_ADNP is not set +# CONFIG_GPIO_MAX7300 is not set +# CONFIG_GPIO_MAX732X is not set +CONFIG_GPIO_PCA953X=y +CONFIG_GPIO_PCA953X_IRQ=y +# CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_SX150X is not set +# CONFIG_GPIO_TPIC2810 is not set +# CONFIG_GPIO_TS4900 is not set + +# +# MFD GPIO expanders +# +CONFIG_GPIO_MAX77620=y + +# +# PCI GPIO expanders +# +# CONFIG_GPIO_AMD8111 is not set +# CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_ML_IOH is not set +# CONFIG_GPIO_RDC321X is not set + +# +# SPI GPIO expanders +# +# CONFIG_GPIO_74X164 is not set +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MC33880 is not set +# CONFIG_GPIO_PISOSR is not set + +# +# SPI or I2C GPIO expanders +# +# CONFIG_GPIO_MCP23S08 is not set + +# +# USB GPIO expanders +# +# CONFIG_W1 is not set +CONFIG_POWER_AVS=y +# CONFIG_ROCKCHIP_IODOMAIN is not set +CONFIG_POWER_RESET=y +# CONFIG_POWER_RESET_GPIO is not set +# CONFIG_POWER_RESET_GPIO_RESTART is not set +# CONFIG_POWER_RESET_HISI is not set +CONFIG_POWER_RESET_MSM=y +# CONFIG_POWER_RESET_LTC2952 is not set +# CONFIG_POWER_RESET_RESTART is not set +CONFIG_POWER_RESET_VEXPRESS=y +CONFIG_POWER_RESET_XGENE=y +CONFIG_POWER_RESET_SYSCON=y +# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set +# CONFIG_POWER_RESET_ZX is not set +# CONFIG_SYSCON_REBOOT_MODE is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_GENERIC_ADC_BATTERY is not set +# CONFIG_TEST_POWER is not set +# CONFIG_BATTERY_DS2780 is not set +# CONFIG_BATTERY_DS2781 is not set +# CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_SBS is not set +CONFIG_BATTERY_BQ27XXX=y +CONFIG_BATTERY_BQ27XXX_I2C=y +# CONFIG_BATTERY_MAX17040 is not set +# CONFIG_BATTERY_MAX17042 is not set +# CONFIG_CHARGER_ISP1704 is not set +# CONFIG_CHARGER_MAX8903 is not set +# CONFIG_CHARGER_LP8727 is not set +# CONFIG_CHARGER_GPIO is not set +# CONFIG_CHARGER_MANAGER is not set +# CONFIG_CHARGER_QCOM_SMBB is not set +# CONFIG_CHARGER_BQ2415X is not set +# CONFIG_CHARGER_BQ24190 is not set +# CONFIG_CHARGER_BQ24257 is not set +# CONFIG_CHARGER_BQ24735 is not set +# CONFIG_CHARGER_BQ25890 is not set +# CONFIG_CHARGER_SMB347 is not set +# CONFIG_BATTERY_GAUGE_LTC2941 is not set +# CONFIG_CHARGER_RT9455 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +# CONFIG_SENSORS_AD7314 is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7310 is not set +# CONFIG_SENSORS_ADT7410 is not set +# CONFIG_SENSORS_ADT7411 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set +CONFIG_SENSORS_ARM_SCPI=y +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS620 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_FTSTEUTATES is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_G762 is not set +# CONFIG_SENSORS_GPIO_FAN is not set +# CONFIG_SENSORS_HIH6130 is not set +# CONFIG_SENSORS_IIO_HWMON is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_JC42 is not set +# CONFIG_SENSORS_POWR1220 is not set +# CONFIG_SENSORS_LINEAGE is not set +# CONFIG_SENSORS_LTC2945 is not set +# CONFIG_SENSORS_LTC2990 is not set +# CONFIG_SENSORS_LTC4151 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4222 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LTC4260 is not set +# CONFIG_SENSORS_LTC4261 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX16065 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX1668 is not set +# CONFIG_SENSORS_MAX197 is not set +# CONFIG_SENSORS_MAX31722 is not set +# CONFIG_SENSORS_MAX6639 is not set +# CONFIG_SENSORS_MAX6642 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_MAX6697 is not set +# CONFIG_SENSORS_MAX31790 is not set +# CONFIG_SENSORS_MCP3021 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM73 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +CONFIG_SENSORS_LM90=m +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LM95234 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_LM95245 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_NTC_THERMISTOR is not set +# CONFIG_SENSORS_NCT6683 is not set +# CONFIG_SENSORS_NCT6775 is not set +# CONFIG_SENSORS_NCT7802 is not set +# CONFIG_SENSORS_NCT7904 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_PMBUS is not set +# CONFIG_SENSORS_PWM_FAN is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_SHT21 is not set +# CONFIG_SENSORS_SHT3x is not set +# CONFIG_SENSORS_SHTC1 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_EMC1403 is not set +# CONFIG_SENSORS_EMC2103 is not set +# CONFIG_SENSORS_EMC6W201 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SCH56XX_COMMON is not set +# CONFIG_SENSORS_SCH5627 is not set +# CONFIG_SENSORS_SCH5636 is not set +# CONFIG_SENSORS_SMM665 is not set +# CONFIG_SENSORS_ADC128D818 is not set +# CONFIG_SENSORS_ADS1015 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_ADS7871 is not set +# CONFIG_SENSORS_AMC6821 is not set +# CONFIG_SENSORS_INA209 is not set +CONFIG_SENSORS_INA2XX=m +# CONFIG_SENSORS_INA3221 is not set +# CONFIG_SENSORS_TC74 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP102 is not set +# CONFIG_SENSORS_TMP103 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set +# CONFIG_SENSORS_VEXPRESS is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83795 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set + +# +# ACPI drivers +# +# CONFIG_SENSORS_ACPI_POWER is not set +CONFIG_THERMAL=y +CONFIG_THERMAL_HWMON=y +CONFIG_THERMAL_OF=y +# CONFIG_THERMAL_WRITABLE_TRIPS is not set +# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set +# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set +# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set +CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR=y +# CONFIG_THERMAL_GOV_FAIR_SHARE is not set +# CONFIG_THERMAL_GOV_STEP_WISE is not set +# CONFIG_THERMAL_GOV_BANG_BANG is not set +# CONFIG_THERMAL_GOV_USER_SPACE is not set +CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y +CONFIG_CPU_THERMAL=y +# CONFIG_CLOCK_THERMAL is not set +CONFIG_THERMAL_EMULATION=y +# CONFIG_HISI_THERMAL is not set +# CONFIG_MAX77620_THERMAL is not set +# CONFIG_QORIQ_THERMAL is not set +# CONFIG_ROCKCHIP_THERMAL is not set +# CONFIG_RCAR_THERMAL is not set +CONFIG_RCAR_GEN3_THERMAL=y +# CONFIG_ARMADA_THERMAL is not set + +# +# ACPI INT340X thermal drivers +# +CONFIG_MTK_THERMAL=y + +# +# Samsung thermal drivers +# +CONFIG_EXYNOS_THERMAL=y + +# +# NVIDIA Tegra thermal drivers +# +# CONFIG_TEGRA_SOCTHERM is not set +# CONFIG_QCOM_SPMI_TEMP_ALARM is not set +# CONFIG_GENERIC_ADC_THERMAL is not set + +# +# Qualcomm thermal drivers +# +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_CORE=y +# CONFIG_WATCHDOG_NOWAYOUT is not set +# CONFIG_WATCHDOG_SYSFS is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_GPIO_WATCHDOG is not set +# CONFIG_WDAT_WDT is not set +# CONFIG_XILINX_WATCHDOG is not set +# CONFIG_ZIIRAVE_WATCHDOG is not set +# CONFIG_ARM_SP805_WATCHDOG is not set +# CONFIG_ARM_SBSA_WATCHDOG is not set +# CONFIG_CADENCE_WATCHDOG is not set +CONFIG_HAVE_S3C2410_WATCHDOG=y +CONFIG_S3C2410_WATCHDOG=y +# CONFIG_DW_WATCHDOG is not set +# CONFIG_SUNXI_WATCHDOG is not set +# CONFIG_MAX63XX_WATCHDOG is not set +# CONFIG_MAX77620_WATCHDOG is not set +# CONFIG_IMX2_WDT is not set +# CONFIG_TEGRA_WATCHDOG is not set +# CONFIG_QCOM_WDT is not set +CONFIG_MESON_GXBB_WATCHDOG=m +CONFIG_MESON_WATCHDOG=m +# CONFIG_MEDIATEK_WATCHDOG is not set +CONFIG_RENESAS_WDT=y +# CONFIG_ALIM7101_WDT is not set +# CONFIG_I6300ESB_WDT is not set +# CONFIG_MEN_A21_WDT is not set +# CONFIG_XEN_WDT is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Watchdog Pretimeout Governors +# +# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set +CONFIG_BCMA_POSSIBLE=y + +# +# Broadcom specific AMBA +# +# CONFIG_BCMA is not set + +# +# Multifunction device drivers +# +CONFIG_MFD_CORE=y +# CONFIG_MFD_ACT8945A is not set +# CONFIG_MFD_AS3711 is not set +# CONFIG_MFD_AS3722 is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_AAT2870_CORE is not set +# CONFIG_MFD_ATMEL_FLEXCOM is not set +# CONFIG_MFD_ATMEL_HLCDC is not set +# CONFIG_MFD_BCM590XX is not set +# CONFIG_MFD_AXP20X_I2C is not set +CONFIG_MFD_CROS_EC=y +CONFIG_MFD_CROS_EC_I2C=y +# CONFIG_MFD_CROS_EC_SPI is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_DA9052_SPI is not set +# CONFIG_MFD_DA9052_I2C is not set +# CONFIG_MFD_DA9055 is not set +# CONFIG_MFD_DA9062 is not set +# CONFIG_MFD_DA9063 is not set +# CONFIG_MFD_DA9150 is not set +# CONFIG_MFD_DLN2 is not set +# CONFIG_MFD_EXYNOS_LPASS is not set +# CONFIG_MFD_MC13XXX_SPI is not set +# CONFIG_MFD_MC13XXX_I2C is not set +# CONFIG_MFD_HI6421_PMIC is not set +CONFIG_MFD_HI655X_PMIC=y +# CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set +# CONFIG_LPC_ICH is not set +# CONFIG_LPC_SCH is not set +# CONFIG_INTEL_SOC_PMIC is not set +# CONFIG_MFD_JANZ_CMODIO is not set +# CONFIG_MFD_KEMPLD is not set +# CONFIG_MFD_88PM800 is not set +# CONFIG_MFD_88PM805 is not set +# CONFIG_MFD_88PM860X is not set +# CONFIG_MFD_MAX14577 is not set +CONFIG_MFD_MAX77620=y +# CONFIG_MFD_MAX77686 is not set +# CONFIG_MFD_MAX77693 is not set +# CONFIG_MFD_MAX77843 is not set +# CONFIG_MFD_MAX8907 is not set +# CONFIG_MFD_MAX8925 is not set +# CONFIG_MFD_MAX8997 is not set +# CONFIG_MFD_MAX8998 is not set +# CONFIG_MFD_MT6397 is not set +# CONFIG_MFD_MENF21BMC is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_MFD_VIPERBOARD is not set +# CONFIG_MFD_RETU is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_QCOM_RPM is not set +CONFIG_MFD_SPMI_PMIC=y +# CONFIG_MFD_RDC321X is not set +# CONFIG_MFD_RTSX_PCI is not set +# CONFIG_MFD_RT5033 is not set +# CONFIG_MFD_RTSX_USB is not set +# CONFIG_MFD_RC5T583 is not set +# CONFIG_MFD_RK808 is not set +# CONFIG_MFD_RN5T618 is not set +CONFIG_MFD_SEC_CORE=y +# CONFIG_MFD_SI476X_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SKY81452 is not set +# CONFIG_MFD_SMSC is not set +# CONFIG_ABX500_CORE is not set +# CONFIG_MFD_STMPE is not set +# CONFIG_MFD_SUN6I_PRCM is not set +CONFIG_MFD_SYSCON=y +# CONFIG_MFD_TI_AM335X_TSCADC is not set +# CONFIG_MFD_LP3943 is not set +# CONFIG_MFD_LP8788 is not set +# CONFIG_MFD_PALMAS is not set +# CONFIG_TPS6105X is not set +# CONFIG_TPS65010 is not set +# CONFIG_TPS6507X is not set +# CONFIG_MFD_TPS65086 is not set +# CONFIG_MFD_TPS65090 is not set +# CONFIG_MFD_TPS65217 is not set +# CONFIG_MFD_TI_LP873X is not set +# CONFIG_MFD_TPS65218 is not set +# CONFIG_MFD_TPS6586X is not set +# CONFIG_MFD_TPS65910 is not set +# CONFIG_MFD_TPS65912_I2C is not set +# CONFIG_MFD_TPS65912_SPI is not set +# CONFIG_MFD_TPS80031 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_TWL6040_CORE is not set +# CONFIG_MFD_WL1273_CORE is not set +# CONFIG_MFD_LM3533 is not set +# CONFIG_MFD_TC3589X is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_VX855 is not set +# CONFIG_MFD_ARIZONA_I2C is not set +# CONFIG_MFD_ARIZONA_SPI is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X_I2C is not set +# CONFIG_MFD_WM831X_SPI is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set +CONFIG_MFD_VEXPRESS_SYSREG=y +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +CONFIG_REGULATOR_FIXED_VOLTAGE=y +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_ACT8865 is not set +# CONFIG_REGULATOR_AD5398 is not set +# CONFIG_REGULATOR_ANATOP is not set +CONFIG_REGULATOR_BD9571MWV=y +# CONFIG_REGULATOR_DA9210 is not set +# CONFIG_REGULATOR_DA9211 is not set +# CONFIG_REGULATOR_FAN53555 is not set +CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_HI655X=y +# CONFIG_REGULATOR_ISL9305 is not set +# CONFIG_REGULATOR_ISL6271A is not set +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_LP3972 is not set +# CONFIG_REGULATOR_LP872X is not set +# CONFIG_REGULATOR_LP8755 is not set +# CONFIG_REGULATOR_LTC3589 is not set +# CONFIG_REGULATOR_LTC3676 is not set +# CONFIG_REGULATOR_MAX1586 is not set +CONFIG_REGULATOR_MAX77620=y +# CONFIG_REGULATOR_MAX8649 is not set +# CONFIG_REGULATOR_MAX8660 is not set +# CONFIG_REGULATOR_MAX8952 is not set +# CONFIG_REGULATOR_MAX8973 is not set +# CONFIG_REGULATOR_MT6311 is not set +# CONFIG_REGULATOR_PFUZE100 is not set +# CONFIG_REGULATOR_PV88060 is not set +# CONFIG_REGULATOR_PV88080 is not set +# CONFIG_REGULATOR_PV88090 is not set +CONFIG_REGULATOR_PWM=y +CONFIG_REGULATOR_QCOM_SMD_RPM=y +CONFIG_REGULATOR_QCOM_SPMI=y +# CONFIG_REGULATOR_S2MPA01 is not set +CONFIG_REGULATOR_S2MPS11=y +# CONFIG_REGULATOR_S5M8767 is not set +# CONFIG_REGULATOR_TPS51632 is not set +# CONFIG_REGULATOR_TPS62360 is not set +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set +# CONFIG_REGULATOR_TPS6524X is not set +# CONFIG_REGULATOR_VEXPRESS is not set +CONFIG_MEDIA_SUPPORT=y + +# +# Multimedia core support +# +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_ANALOG_TV_SUPPORT=y +CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y +# CONFIG_MEDIA_RADIO_SUPPORT is not set +# CONFIG_MEDIA_SDR_SUPPORT is not set +# CONFIG_MEDIA_RC_SUPPORT is not set +CONFIG_MEDIA_CONTROLLER=y +# CONFIG_MEDIA_CONTROLLER_DVB is not set +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_SUBDEV_API=y +CONFIG_VIDEO_V4L2=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +# CONFIG_VIDEO_PCI_SKELETON is not set +CONFIG_VIDEOBUF2_CORE=y +CONFIG_VIDEOBUF2_MEMOPS=y +CONFIG_VIDEOBUF2_DMA_CONTIG=y +CONFIG_VIDEOBUF2_VMALLOC=y +CONFIG_DVB_CORE=y +# CONFIG_DVB_NET is not set +# CONFIG_TTPCI_EEPROM is not set +CONFIG_DVB_MAX_ADAPTERS=8 +# CONFIG_DVB_DYNAMIC_MINORS is not set + +# +# Media drivers +# +# CONFIG_MEDIA_USB_SUPPORT is not set +# CONFIG_MEDIA_PCI_SUPPORT is not set +CONFIG_V4L_PLATFORM_DRIVERS=y +# CONFIG_VIDEO_CAFE_CCIC is not set +# CONFIG_VIDEO_SH_VOU is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS is not set +# CONFIG_VIDEO_XILINX is not set +CONFIG_VIDEO_RCAR_VIN=y +# CONFIG_VIDEO_RCAR_VIN_DEBUG is not set +CONFIG_VIDEO_RCAR_CSI2=y +CONFIG_V4L_MEM2MEM_DRIVERS=y +# CONFIG_VIDEO_MEDIATEK_VPU is not set +# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set +# CONFIG_VIDEO_SAMSUNG_S5P_G2D is not set +# CONFIG_VIDEO_SAMSUNG_S5P_JPEG is not set +# CONFIG_VIDEO_SAMSUNG_S5P_MFC is not set +# CONFIG_VIDEO_SH_VEU is not set +# CONFIG_VIDEO_RENESAS_JPU is not set +CONFIG_VIDEO_RENESAS_FCP=y +CONFIG_VIDEO_RENESAS_VSP1=y +# CONFIG_VIDEO_RENESAS_DEBUG is not set +CONFIG_VIDEO_RENESAS_VSP_ALPHA_BIT_ARGB1555=0 +# CONFIG_V4L_TEST_DRIVERS is not set +# CONFIG_DVB_PLATFORM_DRIVERS is not set + +# +# Supported MMC/SDIO adapters +# +# CONFIG_SMS_SDIO_DRV is not set +# CONFIG_CYPRESS_FIRMWARE is not set + +# +# Media ancillary drivers (tuners, sensors, i2c, spi, frontends) +# +# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set +CONFIG_MEDIA_ATTACH=y + +# +# I2C Encoders, decoders, sensors and other helper chips +# + +# +# Audio decoders, processors and mixers +# +# CONFIG_VIDEO_TVAUDIO is not set +# CONFIG_VIDEO_TDA7432 is not set +# CONFIG_VIDEO_TDA9840 is not set +# CONFIG_VIDEO_TEA6415C is not set +# CONFIG_VIDEO_TEA6420 is not set +# CONFIG_VIDEO_MSP3400 is not set +# CONFIG_VIDEO_CS3308 is not set +# CONFIG_VIDEO_CS5345 is not set +# CONFIG_VIDEO_CS53L32A is not set +# CONFIG_VIDEO_TLV320AIC23B is not set +# CONFIG_VIDEO_UDA1342 is not set +# CONFIG_VIDEO_WM8775 is not set +# CONFIG_VIDEO_WM8739 is not set +# CONFIG_VIDEO_VP27SMPX is not set +# CONFIG_VIDEO_SONY_BTF_MPX is not set + +# +# RDS decoders +# +# CONFIG_VIDEO_SAA6588 is not set + +# +# Video decoders +# +# CONFIG_VIDEO_ADV7180 is not set +# CONFIG_VIDEO_ADV7183 is not set +CONFIG_VIDEO_ADV7482=y +# CONFIG_VIDEO_ADV7604 is not set +# CONFIG_VIDEO_ADV7842 is not set +# CONFIG_VIDEO_BT819 is not set +# CONFIG_VIDEO_BT856 is not set +# CONFIG_VIDEO_BT866 is not set +# CONFIG_VIDEO_KS0127 is not set +# CONFIG_VIDEO_ML86V7667 is not set +# CONFIG_VIDEO_AD5820 is not set +# CONFIG_VIDEO_SAA7110 is not set +# CONFIG_VIDEO_SAA711X is not set +# CONFIG_VIDEO_TC358743 is not set +# CONFIG_VIDEO_TVP514X is not set +# CONFIG_VIDEO_TVP5150 is not set +# CONFIG_VIDEO_TVP7002 is not set +# CONFIG_VIDEO_TW2804 is not set +# CONFIG_VIDEO_TW9903 is not set +# CONFIG_VIDEO_TW9906 is not set +# CONFIG_VIDEO_VPX3220 is not set + +# +# Video and audio decoders +# +# CONFIG_VIDEO_SAA717X is not set +# CONFIG_VIDEO_CX25840 is not set + +# +# Video encoders +# +# CONFIG_VIDEO_SAA7127 is not set +# CONFIG_VIDEO_SAA7185 is not set +# CONFIG_VIDEO_ADV7170 is not set +# CONFIG_VIDEO_ADV7175 is not set +# CONFIG_VIDEO_ADV7343 is not set +# CONFIG_VIDEO_ADV7393 is not set +# CONFIG_VIDEO_ADV7511 is not set +# CONFIG_VIDEO_AD9389B is not set +# CONFIG_VIDEO_AK881X is not set +# CONFIG_VIDEO_THS8200 is not set + +# +# Camera sensor devices +# +# CONFIG_VIDEO_OV2659 is not set +# CONFIG_VIDEO_OV7640 is not set +# CONFIG_VIDEO_OV7670 is not set +# CONFIG_VIDEO_OV9650 is not set +# CONFIG_VIDEO_VS6624 is not set +# CONFIG_VIDEO_MT9M032 is not set +# CONFIG_VIDEO_MT9M111 is not set +# CONFIG_VIDEO_MT9P031 is not set +# CONFIG_VIDEO_MT9T001 is not set +# CONFIG_VIDEO_MT9V011 is not set +# CONFIG_VIDEO_MT9V032 is not set +# CONFIG_VIDEO_SR030PC30 is not set +# CONFIG_VIDEO_NOON010PC30 is not set +# CONFIG_VIDEO_M5MOLS is not set +# CONFIG_VIDEO_S5K6AA is not set +# CONFIG_VIDEO_S5K6A3 is not set +# CONFIG_VIDEO_S5K4ECGX is not set +# CONFIG_VIDEO_S5K5BAF is not set +# CONFIG_VIDEO_SMIAPP is not set +# CONFIG_VIDEO_S5C73M3 is not set + +# +# Flash devices +# +# CONFIG_VIDEO_ADP1653 is not set +# CONFIG_VIDEO_AS3645A is not set +# CONFIG_VIDEO_LM3560 is not set +# CONFIG_VIDEO_LM3646 is not set + +# +# Video improvement chips +# +# CONFIG_VIDEO_UPD64031A is not set +# CONFIG_VIDEO_UPD64083 is not set + +# +# Audio/Video compression chips +# +# CONFIG_VIDEO_SAA6752HS is not set + +# +# Miscellaneous helper chips +# +# CONFIG_VIDEO_THS7303 is not set +# CONFIG_VIDEO_M52790 is not set + +# +# Sensors used on soc_camera driver +# + +# +# SPI helper chips +# +# CONFIG_VIDEO_GS1662 is not set +CONFIG_MEDIA_TUNER=y + +# +# Customize TV tuners +# +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA827X=m +CONFIG_MEDIA_TUNER_TDA18271=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MSI001=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_MT2060=m +CONFIG_MEDIA_TUNER_MT2063=m +CONFIG_MEDIA_TUNER_MT2266=m +CONFIG_MEDIA_TUNER_MT2131=m +CONFIG_MEDIA_TUNER_QT1010=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_XC4000=m +CONFIG_MEDIA_TUNER_MXL5005S=m +CONFIG_MEDIA_TUNER_MXL5007T=m +CONFIG_MEDIA_TUNER_MC44S803=m +CONFIG_MEDIA_TUNER_MAX2165=m +CONFIG_MEDIA_TUNER_TDA18218=m +CONFIG_MEDIA_TUNER_FC0011=m +CONFIG_MEDIA_TUNER_FC0012=m +CONFIG_MEDIA_TUNER_FC0013=m +CONFIG_MEDIA_TUNER_TDA18212=m +CONFIG_MEDIA_TUNER_E4000=m +CONFIG_MEDIA_TUNER_FC2580=m +CONFIG_MEDIA_TUNER_M88RS6000T=m +CONFIG_MEDIA_TUNER_TUA9001=m +CONFIG_MEDIA_TUNER_SI2157=m +CONFIG_MEDIA_TUNER_IT913X=m +CONFIG_MEDIA_TUNER_R820T=m +CONFIG_MEDIA_TUNER_MXL301RF=m +CONFIG_MEDIA_TUNER_QM1D1C0042=m + +# +# Customise DVB Frontends +# + +# +# Multistandard (satellite) frontends +# +CONFIG_DVB_STB0899=m +CONFIG_DVB_STB6100=m +CONFIG_DVB_STV090x=m +CONFIG_DVB_STV6110x=m +CONFIG_DVB_M88DS3103=m + +# +# Multistandard (cable + terrestrial) frontends +# +CONFIG_DVB_DRXK=m +CONFIG_DVB_TDA18271C2DD=m +CONFIG_DVB_SI2165=m +CONFIG_DVB_MN88472=m +CONFIG_DVB_MN88473=m + +# +# DVB-S (satellite) frontends +# +CONFIG_DVB_CX24110=m +CONFIG_DVB_CX24123=m +CONFIG_DVB_MT312=m +CONFIG_DVB_ZL10036=m +CONFIG_DVB_ZL10039=m +CONFIG_DVB_S5H1420=m +CONFIG_DVB_STV0288=m +CONFIG_DVB_STB6000=m +CONFIG_DVB_STV0299=m +CONFIG_DVB_STV6110=m +CONFIG_DVB_STV0900=m +CONFIG_DVB_TDA8083=m +CONFIG_DVB_TDA10086=m +CONFIG_DVB_TDA8261=m +CONFIG_DVB_VES1X93=m +CONFIG_DVB_TUNER_ITD1000=m +CONFIG_DVB_TUNER_CX24113=m +CONFIG_DVB_TDA826X=m +CONFIG_DVB_TUA6100=m +CONFIG_DVB_CX24116=m +CONFIG_DVB_CX24117=m +CONFIG_DVB_CX24120=m +CONFIG_DVB_SI21XX=m +CONFIG_DVB_TS2020=m +CONFIG_DVB_DS3000=m +CONFIG_DVB_MB86A16=m +CONFIG_DVB_TDA10071=m + +# +# DVB-T (terrestrial) frontends +# +CONFIG_DVB_SP8870=m +CONFIG_DVB_SP887X=m +CONFIG_DVB_CX22700=m +CONFIG_DVB_CX22702=m +CONFIG_DVB_S5H1432=m +CONFIG_DVB_DRXD=m +CONFIG_DVB_L64781=m +CONFIG_DVB_TDA1004X=m +CONFIG_DVB_NXT6000=m +CONFIG_DVB_MT352=m +CONFIG_DVB_ZL10353=m +CONFIG_DVB_DIB3000MB=m +CONFIG_DVB_DIB3000MC=m +CONFIG_DVB_DIB7000M=m +CONFIG_DVB_DIB7000P=m +CONFIG_DVB_DIB9000=m +CONFIG_DVB_TDA10048=m +CONFIG_DVB_AF9013=m +CONFIG_DVB_EC100=m +CONFIG_DVB_HD29L2=m +CONFIG_DVB_STV0367=m +CONFIG_DVB_CXD2820R=m +CONFIG_DVB_CXD2841ER=m +CONFIG_DVB_RTL2830=m +CONFIG_DVB_RTL2832=m +CONFIG_DVB_SI2168=m +# CONFIG_DVB_AS102_FE is not set +# CONFIG_DVB_GP8PSK_FE is not set + +# +# DVB-C (cable) frontends +# +CONFIG_DVB_VES1820=m +CONFIG_DVB_TDA10021=m +CONFIG_DVB_TDA10023=m +CONFIG_DVB_STV0297=m + +# +# ATSC (North American/Korean Terrestrial/Cable DTV) frontends +# +CONFIG_DVB_NXT200X=m +CONFIG_DVB_OR51211=m +CONFIG_DVB_OR51132=m +CONFIG_DVB_BCM3510=m +CONFIG_DVB_LGDT330X=m +CONFIG_DVB_LGDT3305=m +CONFIG_DVB_LGDT3306A=m +CONFIG_DVB_LG2160=m +CONFIG_DVB_S5H1409=m +CONFIG_DVB_AU8522=m +CONFIG_DVB_AU8522_DTV=m +CONFIG_DVB_AU8522_V4L=m +CONFIG_DVB_S5H1411=m + +# +# ISDB-T (terrestrial) frontends +# +CONFIG_DVB_S921=m +CONFIG_DVB_DIB8000=m +CONFIG_DVB_MB86A20S=m + +# +# ISDB-S (satellite) & ISDB-T (terrestrial) frontends +# +CONFIG_DVB_TC90522=m + +# +# Digital terrestrial only tuners/PLL +# +CONFIG_DVB_PLL=m +CONFIG_DVB_TUNER_DIB0070=m +CONFIG_DVB_TUNER_DIB0090=m + +# +# SEC control devices for DVB-S +# +CONFIG_DVB_DRX39XYJ=m +CONFIG_DVB_LNBH25=m +CONFIG_DVB_LNBP21=m +CONFIG_DVB_LNBP22=m +CONFIG_DVB_ISL6405=m +CONFIG_DVB_ISL6421=m +CONFIG_DVB_ISL6423=m +CONFIG_DVB_A8293=m +CONFIG_DVB_SP2=m +CONFIG_DVB_LGS8GL5=m +CONFIG_DVB_LGS8GXX=m +CONFIG_DVB_ATBM8830=m +CONFIG_DVB_TDA665x=m +CONFIG_DVB_IX2505V=m +CONFIG_DVB_M88RS2000=m +CONFIG_DVB_AF9033=m +CONFIG_DVB_HORUS3A=m +CONFIG_DVB_ASCOT2E=m +CONFIG_DVB_HELENE=m + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set + +# +# Graphics support +# +CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 +CONFIG_TEGRA_HOST1X=m +CONFIG_TEGRA_HOST1X_FIREWALL=y +CONFIG_DRM=y +CONFIG_DRM_MIPI_DSI=y +# CONFIG_DRM_DP_AUX_CHARDEV is not set +CONFIG_DRM_KMS_HELPER=y +CONFIG_DRM_KMS_FB_HELPER=y +CONFIG_DRM_FBDEV_EMULATION=y +# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set +CONFIG_DRM_TTM=m +CONFIG_DRM_GEM_CMA_HELPER=y +CONFIG_DRM_KMS_CMA_HELPER=y + +# +# I2C encoder or helper chips +# +CONFIG_DRM_I2C_CH7006=m +CONFIG_DRM_I2C_SIL164=m +# CONFIG_DRM_I2C_NXP_TDA998X is not set +# CONFIG_DRM_HDLCD is not set +# CONFIG_DRM_MALI_DISPLAY is not set +# CONFIG_DRM_RADEON is not set +# CONFIG_DRM_AMDGPU is not set + +# +# ACP (Audio CoProcessor) Configuration +# +CONFIG_DRM_NOUVEAU=m +CONFIG_NOUVEAU_PLATFORM_DRIVER=y +CONFIG_NOUVEAU_DEBUG=5 +CONFIG_NOUVEAU_DEBUG_DEFAULT=3 +CONFIG_DRM_NOUVEAU_BACKLIGHT=y +# CONFIG_DRM_VGEM is not set +# CONFIG_DRM_EXYNOS is not set +# CONFIG_DRM_UDL is not set +# CONFIG_DRM_AST is not set +# CONFIG_DRM_MGAG200 is not set +# CONFIG_DRM_CIRRUS_QEMU is not set +CONFIG_DRM_RCAR_DU=y +CONFIG_DRM_RCAR_HDMI=y +CONFIG_DRM_RCAR_LVDS=y +CONFIG_DRM_RCAR_VSP=y +# CONFIG_DRM_QXL is not set +# CONFIG_DRM_BOCHS is not set +# CONFIG_DRM_VIRTIO_GPU is not set +CONFIG_DRM_MSM=y +# CONFIG_DRM_MSM_REGISTER_LOGGING is not set +CONFIG_DRM_MSM_HDMI_HDCP=y +CONFIG_DRM_MSM_DSI=y +CONFIG_DRM_MSM_DSI_PLL=y +CONFIG_DRM_MSM_DSI_28NM_PHY=y +CONFIG_DRM_MSM_DSI_20NM_PHY=y +CONFIG_DRM_MSM_DSI_28NM_8960_PHY=y +CONFIG_DRM_TEGRA=m +# CONFIG_DRM_TEGRA_DEBUG is not set +CONFIG_DRM_PANEL=y + +# +# Display Panels +# +CONFIG_DRM_PANEL_SIMPLE=m +# CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set +# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set +# CONFIG_DRM_PANEL_LG_LG4573 is not set +# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set +# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set +# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set +# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set +CONFIG_DRM_BRIDGE=y + +# +# Display Interface Bridges +# +# CONFIG_DRM_ANALOGIX_ANX78XX is not set +# CONFIG_DRM_DUMB_VGA_DAC is not set +CONFIG_DRM_DW_HDMI=y +# CONFIG_DRM_DW_HDMI_AHB_AUDIO is not set +# CONFIG_DRM_NXP_PTN3460 is not set +# CONFIG_DRM_PARADE_PS8622 is not set +# CONFIG_DRM_SII902X is not set +# CONFIG_DRM_TOSHIBA_TC358767 is not set +CONFIG_DRM_I2C_ADV7511=m +CONFIG_DRM_I2C_ADV7533=y +# CONFIG_DRM_ARCPGU is not set +CONFIG_DRM_HISI_KIRIN=m +CONFIG_HISI_KIRIN_DW_DSI=m +# CONFIG_DRM_MEDIATEK is not set +# CONFIG_DRM_LEGACY is not set + +# +# Frame buffer Devices +# +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +CONFIG_FB_CMDLINE=y +CONFIG_FB_NOTIFY=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +CONFIG_FB_SYS_FILLRECT=y +CONFIG_FB_SYS_COPYAREA=y +CONFIG_FB_SYS_IMAGEBLIT=y +# CONFIG_FB_FOREIGN_ENDIAN is not set +CONFIG_FB_SYS_FOPS=y +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +CONFIG_FB_BACKLIGHT=y +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +CONFIG_FB_ARMCLCD=y +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_EFI is not set +# CONFIG_FB_OPENCORES is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_I740 is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_SH_MOBILE_LCDC is not set +# CONFIG_FB_S3C is not set +# CONFIG_FB_SMSCUFX is not set +# CONFIG_FB_UDL is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_XEN_FBDEV_FRONTEND=y +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_FB_AUO_K190X is not set +# CONFIG_FB_SIMPLE is not set +# CONFIG_FB_SH_MOBILE_MERAM is not set +# CONFIG_FB_SSD1307 is not set +# CONFIG_FB_SM712 is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_L4F00242T03 is not set +# CONFIG_LCD_LMS283GF05 is not set +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI922X is not set +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +# CONFIG_LCD_PLATFORM is not set +# CONFIG_LCD_S6E63M0 is not set +# CONFIG_LCD_LD9040 is not set +# CONFIG_LCD_AMS369FG06 is not set +# CONFIG_LCD_LMS501KF03 is not set +# CONFIG_LCD_HX8357 is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=m +# CONFIG_BACKLIGHT_PWM is not set +# CONFIG_BACKLIGHT_PM8941_WLED is not set +# CONFIG_BACKLIGHT_ADP8860 is not set +# CONFIG_BACKLIGHT_ADP8870 is not set +# CONFIG_BACKLIGHT_LM3630A is not set +# CONFIG_BACKLIGHT_LM3639 is not set +CONFIG_BACKLIGHT_LP855X=m +# CONFIG_BACKLIGHT_GPIO is not set +# CONFIG_BACKLIGHT_LV5207LP is not set +# CONFIG_BACKLIGHT_BD6107 is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEOMODE_HELPERS=y +CONFIG_HDMI=y + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_DUMMY_CONSOLE_COLUMNS=80 +CONFIG_DUMMY_CONSOLE_ROWS=25 +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=y +# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_PCM_ELD=y +CONFIG_SND_PCM_IEC958=y +CONFIG_SND_DMAENGINE_PCM=y +CONFIG_SND_JACK=y +CONFIG_SND_JACK_INPUT_DEV=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +CONFIG_SND_PCM_TIMER=y +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_PROC_FS=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_ALOOP is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_PCI=y +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CTXFI is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LOLA is not set +# CONFIG_SND_LX6464ES is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SE6X is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set + +# +# HD-Audio +# +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDA_TEGRA is not set +CONFIG_SND_HDA_PREALLOC_SIZE=64 +CONFIG_SND_SPI=y +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_UA101 is not set +# CONFIG_SND_USB_CAIAQ is not set +# CONFIG_SND_USB_6FIRE is not set +# CONFIG_SND_USB_HIFACE is not set +# CONFIG_SND_BCD2000 is not set +# CONFIG_SND_USB_POD is not set +# CONFIG_SND_USB_PODHD is not set +# CONFIG_SND_USB_TONEPORT is not set +# CONFIG_SND_USB_VARIAX is not set +CONFIG_SND_SOC=y +CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y +# CONFIG_SND_SOC_AMD_ACP is not set +# CONFIG_SND_ATMEL_SOC is not set +# CONFIG_SND_DESIGNWARE_I2S is not set + +# +# SoC Audio for Freescale CPUs +# + +# +# Common SoC Audio options for Freescale CPUs: +# +# CONFIG_SND_SOC_FSL_ASRC is not set +# CONFIG_SND_SOC_FSL_SAI is not set +# CONFIG_SND_SOC_FSL_SSI is not set +# CONFIG_SND_SOC_FSL_SPDIF is not set +# CONFIG_SND_SOC_FSL_ESAI is not set +# CONFIG_SND_SOC_IMX_AUDMUX is not set +# CONFIG_SND_KIRKWOOD_SOC is not set +# CONFIG_SND_SOC_IMG is not set +# CONFIG_SND_SOC_MT2701 is not set +# CONFIG_SND_SOC_MT8173 is not set +# CONFIG_SND_SOC_QCOM is not set +# CONFIG_SND_SOC_ROCKCHIP is not set +CONFIG_SND_SOC_SAMSUNG=y +# CONFIG_SND_SAMSUNG_PCM is not set +# CONFIG_SND_SAMSUNG_SPDIF is not set +# CONFIG_SND_SAMSUNG_I2S is not set +# CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994 is not set +# CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF is not set +# CONFIG_SND_SOC_SMDK_WM8994_PCM is not set +# CONFIG_SND_SOC_SNOW is not set +# CONFIG_SND_SOC_ARNDALE_RT5631_ALC5631 is not set + +# +# SoC Audio support for SuperH +# +# CONFIG_SND_SOC_SH4_FSI is not set +CONFIG_SND_SOC_RCAR=y + +# +# Allwinner SoC Audio support +# +# CONFIG_SND_SUN4I_CODEC is not set +# CONFIG_SND_SUN4I_I2S is not set +# CONFIG_SND_SUN4I_SPDIF is not set +# CONFIG_SND_SOC_TEGRA is not set +# CONFIG_SND_SOC_XTFPGA_I2S is not set +CONFIG_SND_SOC_I2C_AND_SPI=y + +# +# CODEC drivers +# +# CONFIG_SND_SOC_AC97_CODEC is not set +# CONFIG_SND_SOC_ADAU1701 is not set +# CONFIG_SND_SOC_ADAU7002 is not set +# CONFIG_SND_SOC_AK4104 is not set +# CONFIG_SND_SOC_AK4554 is not set +CONFIG_SND_SOC_AK4613=y +# CONFIG_SND_SOC_AK4642 is not set +# CONFIG_SND_SOC_AK5386 is not set +# CONFIG_SND_SOC_ALC5623 is not set +# CONFIG_SND_SOC_BT_SCO is not set +# CONFIG_SND_SOC_CS35L32 is not set +# CONFIG_SND_SOC_CS35L33 is not set +# CONFIG_SND_SOC_CS42L51_I2C is not set +# CONFIG_SND_SOC_CS42L52 is not set +# CONFIG_SND_SOC_CS42L56 is not set +# CONFIG_SND_SOC_CS42L73 is not set +# CONFIG_SND_SOC_CS4265 is not set +# CONFIG_SND_SOC_CS4270 is not set +# CONFIG_SND_SOC_CS4271_I2C is not set +# CONFIG_SND_SOC_CS4271_SPI is not set +# CONFIG_SND_SOC_CS42XX8_I2C is not set +# CONFIG_SND_SOC_CS4349 is not set +# CONFIG_SND_SOC_CS53L30 is not set +CONFIG_SND_SOC_HDMI_CODEC=y +# CONFIG_SND_SOC_ES8328 is not set +# CONFIG_SND_SOC_GTM601 is not set +# CONFIG_SND_SOC_INNO_RK3036 is not set +# CONFIG_SND_SOC_MAX98504 is not set +# CONFIG_SND_SOC_MAX9860 is not set +# CONFIG_SND_SOC_PCM1681 is not set +# CONFIG_SND_SOC_PCM179X_I2C is not set +# CONFIG_SND_SOC_PCM179X_SPI is not set +# CONFIG_SND_SOC_PCM3168A_I2C is not set +# CONFIG_SND_SOC_PCM3168A_SPI is not set +# CONFIG_SND_SOC_PCM512x_I2C is not set +# CONFIG_SND_SOC_PCM512x_SPI is not set +# CONFIG_SND_SOC_RT5616 is not set +# CONFIG_SND_SOC_RT5631 is not set +# CONFIG_SND_SOC_RT5677_SPI is not set +# CONFIG_SND_SOC_SGTL5000 is not set +# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set +# CONFIG_SND_SOC_SPDIF is not set +# CONFIG_SND_SOC_SSM2602_SPI is not set +# CONFIG_SND_SOC_SSM2602_I2C is not set +# CONFIG_SND_SOC_SSM4567 is not set +# CONFIG_SND_SOC_STA32X is not set +# CONFIG_SND_SOC_STA350 is not set +# CONFIG_SND_SOC_STI_SAS is not set +# CONFIG_SND_SOC_TAS2552 is not set +# CONFIG_SND_SOC_TAS5086 is not set +# CONFIG_SND_SOC_TAS571X is not set +# CONFIG_SND_SOC_TAS5720 is not set +# CONFIG_SND_SOC_TFA9879 is not set +# CONFIG_SND_SOC_TLV320AIC23_I2C is not set +# CONFIG_SND_SOC_TLV320AIC23_SPI is not set +# CONFIG_SND_SOC_TLV320AIC31XX is not set +# CONFIG_SND_SOC_TLV320AIC3X is not set +# CONFIG_SND_SOC_TS3A227E is not set +# CONFIG_SND_SOC_WM8510 is not set +# CONFIG_SND_SOC_WM8523 is not set +# CONFIG_SND_SOC_WM8580 is not set +# CONFIG_SND_SOC_WM8711 is not set +# CONFIG_SND_SOC_WM8728 is not set +# CONFIG_SND_SOC_WM8731 is not set +# CONFIG_SND_SOC_WM8737 is not set +# CONFIG_SND_SOC_WM8741 is not set +# CONFIG_SND_SOC_WM8750 is not set +# CONFIG_SND_SOC_WM8753 is not set +# CONFIG_SND_SOC_WM8770 is not set +# CONFIG_SND_SOC_WM8776 is not set +# CONFIG_SND_SOC_WM8804_I2C is not set +# CONFIG_SND_SOC_WM8804_SPI is not set +# CONFIG_SND_SOC_WM8903 is not set +# CONFIG_SND_SOC_WM8960 is not set +# CONFIG_SND_SOC_WM8962 is not set +# CONFIG_SND_SOC_WM8974 is not set +# CONFIG_SND_SOC_WM8978 is not set +# CONFIG_SND_SOC_WM8985 is not set +# CONFIG_SND_SOC_NAU8810 is not set +# CONFIG_SND_SOC_TPA6130A2 is not set +CONFIG_SND_SIMPLE_CARD_UTILS=y +CONFIG_SND_SIMPLE_CARD=y +# CONFIG_SND_SIMPLE_SCU_CARD is not set +# CONFIG_SOUND_PRIME is not set + +# +# HID support +# +CONFIG_HID=y +# CONFIG_HID_BATTERY_STRENGTH is not set +# CONFIG_HIDRAW is not set +# CONFIG_UHID is not set +CONFIG_HID_GENERIC=y + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=y +# CONFIG_HID_ACRUX is not set +CONFIG_HID_APPLE=y +# CONFIG_HID_APPLEIR is not set +# CONFIG_HID_AUREAL is not set +CONFIG_HID_BELKIN=y +# CONFIG_HID_BETOP_FF is not set +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +# CONFIG_HID_CORSAIR is not set +# CONFIG_HID_PRODIKEYS is not set +# CONFIG_HID_CMEDIA is not set +# CONFIG_HID_CP2112 is not set +CONFIG_HID_CYPRESS=y +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EMS_FF is not set +# CONFIG_HID_ELECOM is not set +# CONFIG_HID_ELO is not set +CONFIG_HID_EZKEY=y +# CONFIG_HID_GEMBIRD is not set +# CONFIG_HID_GFRM is not set +# CONFIG_HID_HOLTEK is not set +# CONFIG_HID_GT683R is not set +# CONFIG_HID_KEYTOUCH is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_UCLOGIC is not set +# CONFIG_HID_WALTOP is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_ICADE is not set +# CONFIG_HID_TWINHAN is not set +CONFIG_HID_KENSINGTON=y +# CONFIG_HID_LCPOWER is not set +# CONFIG_HID_LED is not set +# CONFIG_HID_LENOVO is not set +CONFIG_HID_LOGITECH=y +# CONFIG_HID_LOGITECH_HIDPP is not set +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGIG940_FF is not set +# CONFIG_LOGIWHEELS_FF is not set +# CONFIG_HID_MAGICMOUSE is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +# CONFIG_HID_MULTITOUCH is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_ORTEK is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PENMOUNT is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_PICOLCD is not set +# CONFIG_HID_PLANTRONICS is not set +# CONFIG_HID_PRIMAX is not set +# CONFIG_HID_ROCCAT is not set +# CONFIG_HID_SAITEK is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SPEEDLINK is not set +# CONFIG_HID_STEELSERIES is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_RMI is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TIVO is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THINGM is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_WACOM is not set +# CONFIG_HID_WIIMOTE is not set +# CONFIG_HID_XINMO is not set +# CONFIG_HID_ZEROPLUS is not set +# CONFIG_HID_ZYDACRON is not set +# CONFIG_HID_SENSOR_HUB is not set +# CONFIG_HID_ALPS is not set + +# +# USB HID support +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# I2C HID support +# +# CONFIG_I2C_HID is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_SUPPORT=y +CONFIG_USB_COMMON=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB=y +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEFAULT_PERSIST=y +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_OTG=y +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_OTG_FSM is not set +# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_PCI=y +CONFIG_USB_XHCI_PLATFORM=y +# CONFIG_USB_XHCI_MTK is not set +# CONFIG_USB_XHCI_MVEBU is not set +CONFIG_USB_XHCI_RCAR=y +CONFIG_USB_XHCI_TEGRA=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +CONFIG_USB_EHCI_PCI=y +CONFIG_USB_EHCI_MSM=y +# CONFIG_USB_EHCI_TEGRA is not set +CONFIG_USB_EHCI_EXYNOS=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_FOTG210_HCD is not set +# CONFIG_USB_MAX3421_HCD is not set +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PCI=y +CONFIG_USB_OHCI_EXYNOS=y +CONFIG_USB_OHCI_HCD_PLATFORM=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_RENESAS_USBHS_HCD is not set +# CONFIG_USB_HCD_TEST_MODE is not set +CONFIG_USB_RENESAS_USBHS=y + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_REALTEK is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_STORAGE_ENE_UB6250 is not set +# CONFIG_USB_UAS is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USBIP_CORE is not set +# CONFIG_USB_MUSB_HDRC is not set +CONFIG_USB_DWC3=y +# CONFIG_USB_DWC3_HOST is not set +# CONFIG_USB_DWC3_GADGET is not set +CONFIG_USB_DWC3_DUAL_ROLE=y + +# +# Platform Glue Driver Support +# +CONFIG_USB_DWC3_EXYNOS=y +CONFIG_USB_DWC3_PCI=y +CONFIG_USB_DWC3_OF_SIMPLE=y +CONFIG_USB_DWC2=y +# CONFIG_USB_DWC2_HOST is not set + +# +# Gadget/Dual-role mode requires USB Gadget support to be enabled +# +# CONFIG_USB_DWC2_PERIPHERAL is not set +CONFIG_USB_DWC2_DUAL_ROLE=y +# CONFIG_USB_DWC2_PCI is not set +# CONFIG_USB_DWC2_DEBUG is not set +# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_OF=y +CONFIG_USB_CHIPIDEA_UDC=y +CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_ISP1760=y +CONFIG_USB_ISP1760_HCD=y +CONFIG_USB_ISP1761_UDC=y +# CONFIG_USB_ISP1760_HOST_ROLE is not set +# CONFIG_USB_ISP1760_GADGET_ROLE is not set +CONFIG_USB_ISP1760_DUAL_ROLE=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_EHSET_TEST_FIXTURE is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_YUREX is not set +# CONFIG_USB_EZUSB_FX2 is not set +CONFIG_USB_HSIC_USB3503=y +# CONFIG_USB_HSIC_USB4604 is not set +# CONFIG_USB_LINK_LAYER_TEST is not set +# CONFIG_USB_CHAOSKEY is not set +# CONFIG_UCSI is not set + +# +# USB Physical Layer drivers +# +CONFIG_USB_PHY=y +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_USB_ISP1301 is not set +CONFIG_USB_MSM_OTG=y +# CONFIG_USB_QCOM_8X16_PHY is not set +CONFIG_USB_ULPI=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 + +# +# USB Peripheral Controller +# +# CONFIG_USB_FOTG210_UDC is not set +# CONFIG_USB_GR_UDC is not set +# CONFIG_USB_R8A66597 is not set +CONFIG_USB_RENESAS_USBHS_UDC=y +# CONFIG_USB_RENESAS_USB3 is not set +# CONFIG_USB_PXA27X is not set +# CONFIG_USB_MV_UDC is not set +# CONFIG_USB_MV_U3D is not set +# CONFIG_USB_M66592 is not set +# CONFIG_USB_BDC_UDC is not set +# CONFIG_USB_AMD5536UDC is not set +# CONFIG_USB_NET2272 is not set +# CONFIG_USB_NET2280 is not set +# CONFIG_USB_GOKU is not set +# CONFIG_USB_EG20T is not set +# CONFIG_USB_GADGET_XILINX is not set +# CONFIG_USB_DUMMY_HCD is not set +# CONFIG_USB_CONFIGFS is not set +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_G_NCM is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FUNCTIONFS is not set +# CONFIG_USB_MASS_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_ACM_MS is not set +# CONFIG_USB_G_MULTI is not set +# CONFIG_USB_G_HID is not set +# CONFIG_USB_G_DBGP is not set +# CONFIG_USB_G_WEBCAM is not set +# CONFIG_USB_LED_TRIG is not set +# CONFIG_USB_ULPI_BUS is not set +# CONFIG_UWB is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_PWRSEQ_EMMC=y +CONFIG_PWRSEQ_SIMPLE=y + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_MINORS=32 +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_ARMMMCI=y +CONFIG_MMC_QCOM_DML=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_IO_ACCESSORS=y +# CONFIG_MMC_SDHCI_PCI is not set +CONFIG_MMC_SDHCI_ACPI=y +CONFIG_MMC_SDHCI_PLTFM=y +# CONFIG_MMC_SDHCI_OF_ARASAN is not set +# CONFIG_MMC_SDHCI_OF_AT91 is not set +CONFIG_MMC_SDHCI_OF_ESDHC=y +CONFIG_MMC_SDHCI_TEGRA=y +# CONFIG_MMC_SDHCI_PXAV3 is not set +# CONFIG_MMC_SDHCI_F_SDH30 is not set +CONFIG_MMC_SDHCI_IPROC=y +CONFIG_MMC_SDHCI_MSM=y +# CONFIG_MMC_TIFM_SD is not set +CONFIG_MMC_SPI=y +CONFIG_MMC_TMIO_CORE=y +CONFIG_MMC_SDHI=y +# CONFIG_MMC_SDHI_PIO is not set +# CONFIG_MMC_CB710 is not set +# CONFIG_MMC_VIA_SDMMC is not set +CONFIG_MMC_DW=y +CONFIG_MMC_DW_PLTFM=y +CONFIG_MMC_DW_EXYNOS=y +CONFIG_MMC_DW_K3=y +# CONFIG_MMC_DW_PCI is not set +# CONFIG_MMC_DW_ROCKCHIP is not set +# CONFIG_MMC_SH_MMCIF is not set +# CONFIG_MMC_VUB300 is not set +# CONFIG_MMC_USHC is not set +# CONFIG_MMC_USDHI6ROL0 is not set +CONFIG_MMC_SUNXI=y +# CONFIG_MMC_TOSHIBA_PCI is not set +# CONFIG_MMC_MTK is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +# CONFIG_LEDS_CLASS_FLASH is not set + +# +# LED drivers +# +# CONFIG_LEDS_BCM6328 is not set +# CONFIG_LEDS_BCM6358 is not set +# CONFIG_LEDS_LM3530 is not set +# CONFIG_LEDS_LM3642 is not set +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_LP3952 is not set +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP5523 is not set +# CONFIG_LEDS_LP5562 is not set +# CONFIG_LEDS_LP8501 is not set +# CONFIG_LEDS_LP8860 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_PCA963X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_PWM is not set +# CONFIG_LEDS_REGULATOR is not set +# CONFIG_LEDS_BD2802 is not set +# CONFIG_LEDS_LT3593 is not set +# CONFIG_LEDS_TCA6507 is not set +# CONFIG_LEDS_TLC591XX is not set +# CONFIG_LEDS_LM355x is not set +# CONFIG_LEDS_IS31FL319X is not set +# CONFIG_LEDS_IS31FL32XX is not set + +# +# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) +# +# CONFIG_LEDS_BLINKM is not set +CONFIG_LEDS_SYSCON=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +# CONFIG_LEDS_TRIGGER_ONESHOT is not set +# CONFIG_LEDS_TRIGGER_DISK is not set +# CONFIG_LEDS_TRIGGER_MTD is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +CONFIG_LEDS_TRIGGER_CPU=y +# CONFIG_LEDS_TRIGGER_GPIO is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_LEDS_TRIGGER_TRANSIENT is not set +# CONFIG_LEDS_TRIGGER_CAMERA is not set +# CONFIG_LEDS_TRIGGER_PANIC is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_EDAC_SUPPORT=y +# CONFIG_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +CONFIG_RTC_SYSTOHC=y +CONFIG_RTC_SYSTOHC_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_ABB5ZES3 is not set +# CONFIG_RTC_DRV_ABX80X is not set +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_HYM8563 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +CONFIG_RTC_DRV_MAX77686=y +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_ISL12022 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8523 is not set +# CONFIG_RTC_DRV_PCF85063 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8010 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set +# CONFIG_RTC_DRV_EM3027 is not set +# CONFIG_RTC_DRV_RV8803 is not set +CONFIG_RTC_DRV_S5M=y + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T93 is not set +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1302 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1343 is not set +# CONFIG_RTC_DRV_DS1347 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6916 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RX4581 is not set +# CONFIG_RTC_DRV_RX6110 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_PCF2123 is not set +# CONFIG_RTC_DRV_MCP795 is not set +CONFIG_RTC_I2C_AND_SPI=y + +# +# SPI and I2C RTC drivers +# +CONFIG_RTC_DRV_DS3232=y +# CONFIG_RTC_DRV_PCF2127 is not set +# CONFIG_RTC_DRV_RV3029C2 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1685_FAMILY is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_DS2404 is not set +CONFIG_RTC_DRV_EFI=y +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set +# CONFIG_RTC_DRV_ZYNQMP is not set + +# +# on-CPU RTC drivers +# +CONFIG_HAVE_S3C_RTC=y +CONFIG_RTC_DRV_S3C=y +# CONFIG_RTC_DRV_PL030 is not set +CONFIG_RTC_DRV_PL031=y +CONFIG_RTC_DRV_SUN6I=y +# CONFIG_RTC_DRV_MV is not set +# CONFIG_RTC_DRV_ARMADA38X is not set +# CONFIG_RTC_DRV_PM8XXX is not set +CONFIG_RTC_DRV_TEGRA=y +# CONFIG_RTC_DRV_SNVS is not set +CONFIG_RTC_DRV_XGENE=y + +# +# HID Sensor RTC drivers +# +# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set +CONFIG_DMADEVICES=y +# CONFIG_DMADEVICES_DEBUG is not set + +# +# DMA Devices +# +CONFIG_DMA_ENGINE=y +CONFIG_DMA_VIRTUAL_CHANNELS=y +CONFIG_DMA_ACPI=y +CONFIG_DMA_OF=y +# CONFIG_AMBA_PL08X is not set +# CONFIG_FSL_EDMA is not set +# CONFIG_INTEL_IDMA64 is not set +# CONFIG_K3_DMA is not set +# CONFIG_MV_XOR is not set +# CONFIG_MV_XOR_V2 is not set +CONFIG_PL330_DMA=y +CONFIG_TEGRA20_APB_DMA=y +# CONFIG_TEGRA210_ADMA is not set +# CONFIG_XGENE_DMA is not set +# CONFIG_XILINX_DMA is not set +# CONFIG_XILINX_ZYNQMP_DMA is not set +# CONFIG_ZX_DMA is not set +CONFIG_QCOM_BAM_DMA=y +CONFIG_QCOM_HIDMA_MGMT=y +CONFIG_QCOM_HIDMA=y +# CONFIG_DW_DMAC is not set +# CONFIG_DW_DMAC_PCI is not set +CONFIG_RENESAS_DMA=y +CONFIG_SH_DMAE_BASE=y +# CONFIG_SH_DMAE is not set +CONFIG_RCAR_DMAC=y +CONFIG_RENESAS_USB_DMAC=y +# CONFIG_SUDMAC is not set + +# +# DMA Clients +# +# CONFIG_ASYNC_TX_DMA is not set +# CONFIG_DMATEST is not set + +# +# DMABUF options +# +CONFIG_SYNC_FILE=y +# CONFIG_SW_SYNC is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set +CONFIG_VFIO_IOMMU_TYPE1=y +CONFIG_VFIO_VIRQFD=y +CONFIG_VFIO=y +# CONFIG_VFIO_NOIOMMU is not set +CONFIG_VFIO_PCI=y +CONFIG_VFIO_PCI_MMAP=y +CONFIG_VFIO_PCI_INTX=y +# CONFIG_VFIO_PLATFORM is not set +CONFIG_IRQ_BYPASS_MANAGER=y +# CONFIG_VIRT_DRIVERS is not set +CONFIG_VIRTIO=y + +# +# Virtio drivers +# +CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_PCI_LEGACY=y +CONFIG_VIRTIO_BALLOON=y +# CONFIG_VIRTIO_INPUT is not set +CONFIG_VIRTIO_MMIO=y +# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set + +# +# Microsoft Hyper-V guest support +# + +# +# Xen driver support +# +CONFIG_XEN_BALLOON=y +CONFIG_XEN_SCRUB_PAGES=y +CONFIG_XEN_DEV_EVTCHN=y +CONFIG_XEN_BACKEND=y +CONFIG_XENFS=y +CONFIG_XEN_COMPAT_XENFS=y +CONFIG_XEN_SYS_HYPERVISOR=y +CONFIG_XEN_XENBUS_FRONTEND=y +CONFIG_XEN_GNTDEV=y +CONFIG_XEN_GRANT_DEV_ALLOC=y +CONFIG_SWIOTLB_XEN=y +CONFIG_XEN_PRIVCMD=y +CONFIG_XEN_EFI=y +CONFIG_XEN_AUTO_XLATE=y +# CONFIG_STAGING is not set +# CONFIG_GOLDFISH is not set +CONFIG_CHROME_PLATFORMS=y +# CONFIG_CROS_EC_CHARDEV is not set +CONFIG_CROS_EC_PROTO=y +# CONFIG_CROS_KBD_LED_BACKLIGHT is not set +CONFIG_CLKDEV_LOOKUP=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_COMMON_CLK=y + +# +# Common Clock Framework +# +CONFIG_COMMON_CLK_VERSATILE=y +CONFIG_CLK_SP810=y +CONFIG_CLK_VEXPRESS_OSC=y +# CONFIG_COMMON_CLK_MAX77686 is not set +CONFIG_COMMON_CLK_SCPI=y +# CONFIG_COMMON_CLK_SI5351 is not set +# CONFIG_COMMON_CLK_SI514 is not set +# CONFIG_COMMON_CLK_SI570 is not set +# CONFIG_COMMON_CLK_CDCE706 is not set +# CONFIG_COMMON_CLK_CDCE925 is not set +CONFIG_COMMON_CLK_CS2000_CP=y +CONFIG_COMMON_CLK_S2MPS11=y +CONFIG_CLK_QORIQ=y +CONFIG_COMMON_CLK_XGENE=y +# CONFIG_COMMON_CLK_NXP is not set +# CONFIG_COMMON_CLK_PWM is not set +CONFIG_COMMON_CLK_5P49V5923A=y +# CONFIG_COMMON_CLK_PXA is not set +# CONFIG_COMMON_CLK_PIC32 is not set +CONFIG_COMMON_CLK_IPROC=y +CONFIG_CLK_BCM_NS2=y +CONFIG_COMMON_CLK_HI3519=y +CONFIG_COMMON_CLK_HI6220=y +CONFIG_RESET_HISI=y +# CONFIG_STUB_CLK_HI6220 is not set +CONFIG_COMMON_CLK_MEDIATEK=y +CONFIG_COMMON_CLK_MT8135=y +CONFIG_COMMON_CLK_MT8173=y +CONFIG_COMMON_CLK_AMLOGIC=y +CONFIG_COMMON_CLK_GXBB=y +CONFIG_ARMADA_37XX_CLK=y +CONFIG_ARMADA_AP806_SYSCON=y +CONFIG_ARMADA_CP110_SYSCON=y +CONFIG_QCOM_GDSC=y +CONFIG_COMMON_CLK_QCOM=y +# CONFIG_APQ_GCC_8084 is not set +# CONFIG_APQ_MMCC_8084 is not set +# CONFIG_IPQ_GCC_4019 is not set +# CONFIG_IPQ_GCC_806X is not set +# CONFIG_IPQ_LCC_806X is not set +# CONFIG_MSM_GCC_8660 is not set +CONFIG_MSM_GCC_8916=y +# CONFIG_MSM_GCC_8960 is not set +# CONFIG_MSM_LCC_8960 is not set +# CONFIG_MDM_GCC_9615 is not set +# CONFIG_MDM_LCC_9615 is not set +# CONFIG_MSM_MMCC_8960 is not set +# CONFIG_MSM_GCC_8974 is not set +# CONFIG_MSM_MMCC_8974 is not set +CONFIG_MSM_GCC_8996=y +CONFIG_MSM_MMCC_8996=y +CONFIG_CLK_RENESAS_CPG_MSSR=y +CONFIG_COMMON_CLK_SAMSUNG=y +CONFIG_EXYNOS_ARM64_COMMON_CLK=y +CONFIG_EXYNOS_AUDSS_CLK_CON=y +CONFIG_SUNXI_CCU=y +# CONFIG_SUN6I_A31_CCU is not set +# CONFIG_SUN8I_A23_CCU is not set +# CONFIG_SUN8I_A33_CCU is not set +# CONFIG_SUN8I_H3_CCU is not set +CONFIG_CLK_UNIPHIER=y +CONFIG_HWSPINLOCK=y + +# +# Hardware Spinlock drivers +# +CONFIG_HWSPINLOCK_QCOM=y +CONFIG_HWSPINLOCK_RCAR=y + +# +# Clock Source drivers +# +CONFIG_CLKSRC_OF=y +CONFIG_CLKSRC_ACPI=y +CONFIG_CLKSRC_PROBE=y +CONFIG_CLKSRC_MMIO=y +CONFIG_ROCKCHIP_TIMER=y +CONFIG_ARM_ARCH_TIMER=y +CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y +CONFIG_FSL_ERRATUM_A008585=y +CONFIG_ARM_TIMER_SP804=y +# CONFIG_ATMEL_PIT is not set +CONFIG_MTK_TIMER=y +# CONFIG_SH_TIMER_CMT is not set +# CONFIG_SH_TIMER_MTU2 is not set +# CONFIG_SH_TIMER_TMU is not set +# CONFIG_EM_TIMER_STI is not set +CONFIG_CLKSRC_VERSATILE=y +CONFIG_MAILBOX=y +CONFIG_ARM_MHU=y +# CONFIG_PLATFORM_MHU is not set +# CONFIG_PL320_MBOX is not set +# CONFIG_ROCKCHIP_MBOX is not set +# CONFIG_PCC is not set +# CONFIG_ALTERA_MBOX is not set +CONFIG_HI6220_MBOX=y +# CONFIG_MAILBOX_TEST is not set +# CONFIG_XGENE_SLIMPRO_MBOX is not set +CONFIG_BCM_PDC_MBOX=y +CONFIG_IOMMU_API=y +CONFIG_IOMMU_SUPPORT=y + +# +# Generic IOMMU Pagetable Support +# +CONFIG_IOMMU_IO_PGTABLE=y +CONFIG_IOMMU_IO_PGTABLE_LPAE=y +# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set +# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set +CONFIG_IOMMU_IOVA=y +CONFIG_OF_IOMMU=y +CONFIG_IOMMU_DMA=y +# CONFIG_EXYNOS_IOMMU is not set +# CONFIG_IPMMU_VMSA is not set +CONFIG_ARM_SMMU=y +# CONFIG_ARM_SMMU_V3 is not set +# CONFIG_MTK_IOMMU is not set + +# +# Remoteproc drivers +# +# CONFIG_STE_MODEM_RPROC is not set +# CONFIG_QCOM_Q6V5_PIL is not set +# CONFIG_QCOM_WCNSS_PIL is not set + +# +# Rpmsg drivers +# +CONFIG_RPMSG=y +CONFIG_RPMSG_VIRTIO=y + +# +# SOC (System On Chip) specific Drivers +# + +# +# Broadcom SoC drivers +# +CONFIG_MTK_INFRACFG=y +# CONFIG_MTK_PMIC_WRAP is not set +CONFIG_MTK_SCPSYS=y +# CONFIG_QCOM_GSBI is not set +CONFIG_QCOM_SMEM=y +CONFIG_QCOM_SMD=y +CONFIG_QCOM_SMD_RPM=y +# CONFIG_QCOM_SMP2P is not set +# CONFIG_QCOM_SMSM is not set +# CONFIG_QCOM_WCNSS_CTRL is not set +# CONFIG_ROCKCHIP_PM_DOMAINS is not set +CONFIG_SOC_SAMSUNG=y +CONFIG_SUNXI_SRAM=y +CONFIG_ARCH_TEGRA_132_SOC=y +CONFIG_ARCH_TEGRA_210_SOC=y +# CONFIG_SOC_TI is not set +CONFIG_RCAR_THERMAL_EMS_ENABLED=y +CONFIG_RCAR_DDR_BACKUP=y +# CONFIG_PM_DEVFREQ is not set +CONFIG_EXTCON=y + +# +# Extcon Device Drivers +# +# CONFIG_EXTCON_ADC_JACK is not set +# CONFIG_EXTCON_GPIO is not set +# CONFIG_EXTCON_MAX3355 is not set +# CONFIG_EXTCON_QCOM_SPMI_MISC is not set +# CONFIG_EXTCON_RT8973A is not set +# CONFIG_EXTCON_SM5502 is not set +CONFIG_EXTCON_USB_GPIO=y +# CONFIG_MEMORY is not set +CONFIG_IIO=y +# CONFIG_IIO_BUFFER is not set +# CONFIG_IIO_CONFIGFS is not set +# CONFIG_IIO_TRIGGER is not set +# CONFIG_IIO_SW_DEVICE is not set +# CONFIG_IIO_SW_TRIGGER is not set + +# +# Accelerometers +# +# CONFIG_BMA180 is not set +# CONFIG_BMA220 is not set +# CONFIG_BMC150_ACCEL is not set +# CONFIG_DMARD06 is not set +# CONFIG_DMARD09 is not set +# CONFIG_IIO_ST_ACCEL_3AXIS is not set +# CONFIG_KXSD9 is not set +# CONFIG_KXCJK1013 is not set +# CONFIG_MC3230 is not set +# CONFIG_MMA7455_I2C is not set +# CONFIG_MMA7455_SPI is not set +# CONFIG_MMA7660 is not set +# CONFIG_MMA8452 is not set +# CONFIG_MMA9551 is not set +# CONFIG_MMA9553 is not set +# CONFIG_MXC4005 is not set +# CONFIG_MXC6255 is not set +# CONFIG_STK8312 is not set +# CONFIG_STK8BA50 is not set + +# +# Analog to digital converters +# +# CONFIG_AD7266 is not set +# CONFIG_AD7291 is not set +# CONFIG_AD7298 is not set +# CONFIG_AD7476 is not set +# CONFIG_AD7791 is not set +# CONFIG_AD7793 is not set +# CONFIG_AD7887 is not set +# CONFIG_AD7923 is not set +# CONFIG_AD799X is not set +# CONFIG_BCM_IPROC_ADC is not set +# CONFIG_BERLIN2_ADC is not set +# CONFIG_CC10001_ADC is not set +CONFIG_EXYNOS_ADC=y +# CONFIG_HI8435 is not set +# CONFIG_INA2XX_ADC is not set +# CONFIG_LTC2485 is not set +# CONFIG_MAX1027 is not set +# CONFIG_MAX1363 is not set +# CONFIG_MCP320X is not set +# CONFIG_MCP3422 is not set +# CONFIG_MEDIATEK_MT6577_AUXADC is not set +# CONFIG_NAU7802 is not set +# CONFIG_QCOM_SPMI_IADC is not set +# CONFIG_QCOM_SPMI_VADC is not set +# CONFIG_ROCKCHIP_SARADC is not set +# CONFIG_TI_ADC081C is not set +# CONFIG_TI_ADC0832 is not set +# CONFIG_TI_ADC12138 is not set +# CONFIG_TI_ADC128S052 is not set +# CONFIG_TI_ADC161S626 is not set +# CONFIG_TI_ADS1015 is not set +# CONFIG_TI_ADS8688 is not set +# CONFIG_VF610_ADC is not set + +# +# Amplifiers +# +# CONFIG_AD8366 is not set + +# +# Chemical Sensors +# +# CONFIG_ATLAS_PH_SENSOR is not set +# CONFIG_IAQCORE is not set +# CONFIG_VZ89X is not set + +# +# Hid Sensor IIO Common +# + +# +# SSP Sensor Common +# +# CONFIG_IIO_SSP_SENSORHUB is not set + +# +# Digital to analog converters +# +# CONFIG_AD5064 is not set +# CONFIG_AD5360 is not set +# CONFIG_AD5380 is not set +# CONFIG_AD5421 is not set +# CONFIG_AD5446 is not set +# CONFIG_AD5449 is not set +# CONFIG_AD5592R is not set +# CONFIG_AD5593R is not set +# CONFIG_AD5504 is not set +# CONFIG_AD5624R_SPI is not set +# CONFIG_AD5686 is not set +# CONFIG_AD5755 is not set +# CONFIG_AD5761 is not set +# CONFIG_AD5764 is not set +# CONFIG_AD5791 is not set +# CONFIG_AD7303 is not set +# CONFIG_AD8801 is not set +# CONFIG_M62332 is not set +# CONFIG_MAX517 is not set +# CONFIG_MAX5821 is not set +# CONFIG_MCP4725 is not set +# CONFIG_MCP4922 is not set +# CONFIG_VF610_DAC is not set + +# +# IIO dummy driver +# + +# +# Frequency Synthesizers DDS/PLL +# + +# +# Clock Generator/Distribution +# +# CONFIG_AD9523 is not set + +# +# Phase-Locked Loop (PLL) frequency synthesizers +# +# CONFIG_ADF4350 is not set + +# +# Digital gyroscope sensors +# +# CONFIG_ADIS16080 is not set +# CONFIG_ADIS16130 is not set +# CONFIG_ADIS16136 is not set +# CONFIG_ADIS16260 is not set +# CONFIG_ADXRS450 is not set +# CONFIG_BMG160 is not set +# CONFIG_IIO_ST_GYRO_3AXIS is not set +# CONFIG_ITG3200 is not set + +# +# Health Sensors +# + +# +# Heart Rate Monitors +# +# CONFIG_AFE4403 is not set +# CONFIG_AFE4404 is not set +# CONFIG_MAX30100 is not set + +# +# Humidity sensors +# +# CONFIG_AM2315 is not set +# CONFIG_DHT11 is not set +# CONFIG_HDC100X is not set +# CONFIG_HTU21 is not set +# CONFIG_SI7005 is not set +# CONFIG_SI7020 is not set + +# +# Inertial measurement units +# +# CONFIG_ADIS16400 is not set +# CONFIG_ADIS16480 is not set +# CONFIG_BMI160_I2C is not set +# CONFIG_BMI160_SPI is not set +# CONFIG_KMX61 is not set +# CONFIG_INV_MPU6050_I2C is not set +# CONFIG_INV_MPU6050_SPI is not set + +# +# Light sensors +# +# CONFIG_ACPI_ALS is not set +# CONFIG_ADJD_S311 is not set +# CONFIG_AL3320A is not set +# CONFIG_APDS9300 is not set +# CONFIG_APDS9960 is not set +# CONFIG_BH1750 is not set +# CONFIG_BH1780 is not set +# CONFIG_CM32181 is not set +# CONFIG_CM3232 is not set +# CONFIG_CM3323 is not set +# CONFIG_CM36651 is not set +# CONFIG_GP2AP020A00F is not set +# CONFIG_ISL29125 is not set +# CONFIG_JSA1212 is not set +# CONFIG_RPR0521 is not set +# CONFIG_LTR501 is not set +# CONFIG_MAX44000 is not set +# CONFIG_OPT3001 is not set +# CONFIG_PA12203001 is not set +# CONFIG_SI1145 is not set +# CONFIG_STK3310 is not set +# CONFIG_TCS3414 is not set +# CONFIG_TCS3472 is not set +# CONFIG_SENSORS_TSL2563 is not set +# CONFIG_TSL4531 is not set +# CONFIG_US5182D is not set +# CONFIG_VCNL4000 is not set +# CONFIG_VEML6070 is not set + +# +# Magnetometer sensors +# +# CONFIG_AK8974 is not set +# CONFIG_AK8975 is not set +# CONFIG_AK09911 is not set +# CONFIG_BMC150_MAGN_I2C is not set +# CONFIG_BMC150_MAGN_SPI is not set +# CONFIG_MAG3110 is not set +# CONFIG_MMC35240 is not set +# CONFIG_IIO_ST_MAGN_3AXIS is not set +# CONFIG_SENSORS_HMC5843_I2C is not set +# CONFIG_SENSORS_HMC5843_SPI is not set + +# +# Inclinometer sensors +# + +# +# Digital potentiometers +# +# CONFIG_DS1803 is not set +# CONFIG_MAX5487 is not set +# CONFIG_MCP4131 is not set +# CONFIG_MCP4531 is not set +# CONFIG_TPL0102 is not set + +# +# Pressure sensors +# +# CONFIG_BMP280 is not set +# CONFIG_HP03 is not set +# CONFIG_MPL115_I2C is not set +# CONFIG_MPL115_SPI is not set +# CONFIG_MPL3115 is not set +# CONFIG_MS5611 is not set +# CONFIG_MS5637 is not set +# CONFIG_IIO_ST_PRESS is not set +# CONFIG_T5403 is not set +# CONFIG_HP206C is not set +# CONFIG_ZPA2326 is not set + +# +# Lightning sensors +# +# CONFIG_AS3935 is not set + +# +# Proximity sensors +# +# CONFIG_LIDAR_LITE_V2 is not set +# CONFIG_SX9500 is not set + +# +# Temperature sensors +# +# CONFIG_MAXIM_THERMOCOUPLE is not set +# CONFIG_MLX90614 is not set +# CONFIG_TMP006 is not set +# CONFIG_TSYS01 is not set +# CONFIG_TSYS02D is not set +# CONFIG_NTB is not set +# CONFIG_VME_BUS is not set +CONFIG_PWM=y +CONFIG_PWM_SYSFS=y +# CONFIG_PWM_BCM_IPROC is not set +# CONFIG_PWM_BERLIN is not set +# CONFIG_PWM_CROS_EC is not set +# CONFIG_PWM_FSL_FTM is not set +# CONFIG_PWM_MESON is not set +# CONFIG_PWM_MTK_DISP is not set +# CONFIG_PWM_PCA9685 is not set +CONFIG_PWM_RCAR=y +# CONFIG_PWM_RENESAS_TPU is not set +# CONFIG_PWM_ROCKCHIP is not set +CONFIG_PWM_SAMSUNG=y +# CONFIG_PWM_SUN4I is not set +CONFIG_PWM_TEGRA=m +CONFIG_IRQCHIP=y +CONFIG_ARM_GIC=y +CONFIG_ARM_GIC_MAX_NR=1 +CONFIG_ARM_GIC_V2M=y +CONFIG_ARM_GIC_V3=y +CONFIG_ARM_GIC_V3_ITS=y +CONFIG_ALPINE_MSI=y +CONFIG_DW_APB_ICTL=y +CONFIG_HISILICON_IRQ_MBIGEN=y +CONFIG_RENESAS_IRQC=y +CONFIG_MVEBU_ODMI=y +CONFIG_MVEBU_PIC=y +CONFIG_LS_SCFG_MSI=y +CONFIG_PARTITION_PERCPU=y +# CONFIG_IPACK_BUS is not set +CONFIG_ARCH_HAS_RESET_CONTROLLER=y +CONFIG_RESET_CONTROLLER=y +# CONFIG_RESET_ATH79 is not set +CONFIG_RESET_BERLIN=y +# CONFIG_RESET_LPC18XX is not set +CONFIG_RESET_MESON=y +# CONFIG_RESET_PISTACHIO is not set +# CONFIG_RESET_SOCFPGA is not set +# CONFIG_RESET_STM32 is not set +CONFIG_RESET_SUNXI=y +# CONFIG_TI_SYSCON_RESET is not set +CONFIG_RESET_UNIPHIER=y +# CONFIG_RESET_ZYNQ is not set +CONFIG_COMMON_RESET_HI6220=y +# CONFIG_FMC is not set + +# +# PHY Subsystem +# +CONFIG_GENERIC_PHY=y +# CONFIG_PHY_BCM_NS_USB2 is not set +# CONFIG_PHY_BCM_NS_USB3 is not set +# CONFIG_PHY_BERLIN_USB is not set +# CONFIG_PHY_BERLIN_SATA is not set +CONFIG_PHY_EXYNOS_MIPI_VIDEO=y +# CONFIG_PHY_PXA_28NM_HSIC is not set +# CONFIG_PHY_PXA_28NM_USB2 is not set +# CONFIG_PHY_RCAR_GEN2 is not set +CONFIG_PHY_RCAR_GEN3_USB2=y +CONFIG_PHY_EXYNOS_DP_VIDEO=y +# CONFIG_BCM_KONA_USB2_PHY is not set +# CONFIG_PHY_MT65XX_USB3 is not set +CONFIG_PHY_HI6220_USB=y +# CONFIG_PHY_SUN4I_USB is not set +# CONFIG_PHY_SUN9I_USB is not set +CONFIG_PHY_SAMSUNG_USB2=y +# CONFIG_PHY_EXYNOS4210_USB2 is not set +# CONFIG_PHY_EXYNOS4X12_USB2 is not set +# CONFIG_PHY_EXYNOS5250_USB2 is not set +CONFIG_PHY_EXYNOS5_USBDRD=y +# CONFIG_PHY_QCOM_APQ8064_SATA is not set +# CONFIG_PHY_QCOM_IPQ806X_SATA is not set +# CONFIG_PHY_ROCKCHIP_USB is not set +# CONFIG_PHY_ROCKCHIP_INNO_USB2 is not set +# CONFIG_PHY_ROCKCHIP_EMMC is not set +# CONFIG_PHY_ROCKCHIP_DP is not set +# CONFIG_PHY_ROCKCHIP_PCIE is not set +# CONFIG_PHY_ROCKCHIP_TYPEC is not set +CONFIG_PHY_XGENE=y +# CONFIG_PHY_QCOM_UFS is not set +CONFIG_PHY_BRCM_SATA=y +CONFIG_PHY_TEGRA_XUSB=y +CONFIG_PHY_NS2_PCIE=y +# CONFIG_POWERCAP is not set +# CONFIG_MCB is not set + +# +# Performance monitor support +# +CONFIG_ARM_PMU=y +# CONFIG_XGENE_PMU is not set +CONFIG_RAS=y +# CONFIG_THUNDERBOLT is not set + +# +# Android +# +# CONFIG_ANDROID is not set +# CONFIG_LIBNVDIMM is not set +# CONFIG_DEV_DAX is not set +# CONFIG_NVMEM is not set +# CONFIG_STM is not set +# CONFIG_INTEL_TH is not set + +# +# FPGA Configuration Support +# +# CONFIG_FPGA is not set + +# +# Firmware Drivers +# +CONFIG_ARM_PSCI_FW=y +CONFIG_ARM_SCPI_PROTOCOL=y +CONFIG_ARM_SCPI_POWER_DOMAIN=y +# CONFIG_FIRMWARE_MEMMAP is not set +CONFIG_DMIID=y +# CONFIG_DMI_SYSFS is not set +# CONFIG_FW_CFG_SYSFS is not set +CONFIG_QCOM_SCM=y +CONFIG_QCOM_SCM_64=y +CONFIG_HAVE_ARM_SMCCC=y + +# +# EFI (Extensible Firmware Interface) Support +# +# CONFIG_EFI_VARS is not set +CONFIG_EFI_ESRT=y +CONFIG_EFI_PARAMS_FROM_FDT=y +CONFIG_EFI_RUNTIME_WRAPPERS=y +CONFIG_EFI_ARMSTUB=y +# CONFIG_EFI_CAPSULE_LOADER is not set +# CONFIG_EFI_TEST is not set +CONFIG_MESON_SM=y +CONFIG_ACPI=y +CONFIG_ACPI_GENERIC_GSI=y +CONFIG_ACPI_CCA_REQUIRED=y +# CONFIG_ACPI_DEBUGGER is not set +CONFIG_ACPI_SPCR_TABLE=y +# CONFIG_ACPI_EC_DEBUGFS is not set +CONFIG_ACPI_BUTTON=y +CONFIG_ACPI_FAN=y +# CONFIG_ACPI_DOCK is not set +CONFIG_ACPI_PROCESSOR_IDLE=y +CONFIG_ACPI_MCFG=y +CONFIG_ACPI_PROCESSOR=y +CONFIG_ACPI_HOTPLUG_CPU=y +CONFIG_ACPI_THERMAL=y +# CONFIG_ACPI_CUSTOM_DSDT is not set +CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y +CONFIG_ACPI_TABLE_UPGRADE=y +# CONFIG_ACPI_DEBUG is not set +# CONFIG_ACPI_PCI_SLOT is not set +CONFIG_ACPI_CONTAINER=y +# CONFIG_ACPI_HED is not set +# CONFIG_ACPI_CUSTOM_METHOD is not set +CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y +# CONFIG_PMIC_OPREGION is not set +# CONFIG_ACPI_CONFIGFS is not set +CONFIG_ACPI_IORT=y + +# +# File systems +# +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y +# CONFIG_EXT4_FS_SECURITY is not set +# CONFIG_EXT4_ENCRYPTION is not set +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_BTRFS_FS=m +CONFIG_BTRFS_FS_POSIX_ACL=y +# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set +# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set +# CONFIG_BTRFS_DEBUG is not set +# CONFIG_BTRFS_ASSERT is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_F2FS_FS is not set +# CONFIG_FS_DAX is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_EXPORTFS=y +# CONFIG_EXPORTFS_BLOCK_OPS is not set +CONFIG_FILE_LOCKING=y +CONFIG_MANDATORY_FILE_LOCKING=y +# CONFIG_FS_ENCRYPTION is not set +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_FANOTIFY=y +CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QUOTA_DEBUG is not set +# CONFIG_QFMT_V1 is not set +# CONFIG_QFMT_V2 is not set +CONFIG_QUOTACTL=y +CONFIG_AUTOFS4_FS=y +CONFIG_FUSE_FS=m +CONFIG_CUSE=m +CONFIG_OVERLAY_FS=m + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_FAT_DEFAULT_UTF8 is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_PROC_CHILDREN is not set +CONFIG_KERNFS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_TMPFS_XATTR is not set +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_ARCH_HAS_GIGANTIC_PAGE=y +CONFIG_CONFIGFS_FS=y +CONFIG_EFIVAR_FS=y +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ORANGEFS_FS is not set +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_LOGFS is not set +# CONFIG_CRAMFS is not set +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_FILE_CACHE=y +# CONFIG_SQUASHFS_FILE_DIRECT is not set +CONFIG_SQUASHFS_DECOMP_SINGLE=y +# CONFIG_SQUASHFS_DECOMP_MULTI is not set +# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set +# CONFIG_SQUASHFS_XATTR is not set +CONFIG_SQUASHFS_ZLIB=y +# CONFIG_SQUASHFS_LZ4 is not set +# CONFIG_SQUASHFS_LZO is not set +# CONFIG_SQUASHFS_XZ is not set +# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_QNX6FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_PSTORE is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V2=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_SWAP is not set +CONFIG_NFS_V4_1=y +CONFIG_NFS_V4_2=y +CONFIG_PNFS_FILE_LAYOUT=y +CONFIG_PNFS_FLEXFILE_LAYOUT=m +CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" +# CONFIG_NFS_V4_1_MIGRATION is not set +CONFIG_NFS_V4_SECURITY_LABEL=y +CONFIG_ROOT_NFS=y +# CONFIG_NFS_USE_LEGACY_DNS is not set +CONFIG_NFS_USE_KERNEL_DNS=y +# CONFIG_NFSD is not set +CONFIG_GRACE_PERIOD=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_SUNRPC_BACKCHANNEL=y +# CONFIG_SUNRPC_DEBUG is not set +# CONFIG_CEPH_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +CONFIG_9P_FS=y +# CONFIG_9P_FS_POSIX_ACL is not set +# CONFIG_9P_FS_SECURITY is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_MAC_ROMAN is not set +# CONFIG_NLS_MAC_CELTIC is not set +# CONFIG_NLS_MAC_CENTEURO is not set +# CONFIG_NLS_MAC_CROATIAN is not set +# CONFIG_NLS_MAC_CYRILLIC is not set +# CONFIG_NLS_MAC_GAELIC is not set +# CONFIG_NLS_MAC_GREEK is not set +# CONFIG_NLS_MAC_ICELAND is not set +# CONFIG_NLS_MAC_INUIT is not set +# CONFIG_NLS_MAC_ROMANIAN is not set +# CONFIG_NLS_MAC_TURKISH is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set +CONFIG_HAVE_KVM_IRQCHIP=y +CONFIG_HAVE_KVM_IRQFD=y +CONFIG_HAVE_KVM_IRQ_ROUTING=y +CONFIG_HAVE_KVM_EVENTFD=y +CONFIG_KVM_MMIO=y +CONFIG_HAVE_KVM_MSI=y +CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y +CONFIG_KVM_VFIO=y +CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL=y +CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y +CONFIG_KVM_COMPAT=y +CONFIG_VIRTUALIZATION=y +CONFIG_KVM_ARM_VGIC_V3_ITS=y +CONFIG_KVM=y +CONFIG_KVM_ARM_HOST=y +CONFIG_KVM_ARM_PMU=y +# CONFIG_VHOST_NET is not set +# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set + +# +# Kernel hacking +# + +# +# printk and dmesg options +# +CONFIG_PRINTK_TIME=y +CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DYNAMIC_DEBUG is not set + +# +# Compile-time checks and compiler options +# +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_INFO_REDUCED is not set +# CONFIG_DEBUG_INFO_SPLIT is not set +# CONFIG_DEBUG_INFO_DWARF4 is not set +# CONFIG_GDB_SCRIPTS is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=2048 +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_READABLE_ASM is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_PAGE_OWNER is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_SECTION_MISMATCH is not set +CONFIG_SECTION_MISMATCH_WARN_ONLY=y +CONFIG_ARCH_WANT_FRAME_POINTERS=y +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 +CONFIG_DEBUG_KERNEL=y + +# +# Memory Debugging +# +# CONFIG_PAGE_EXTENSION is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PAGE_POISONING is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +CONFIG_HAVE_DEBUG_KMEMLEAK=y +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_VM is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_PER_CPU_MAPS is not set +CONFIG_HAVE_ARCH_KASAN=y +# CONFIG_KASAN is not set +CONFIG_ARCH_HAS_KCOV=y +# CONFIG_KCOV is not set +# CONFIG_DEBUG_SHIRQ is not set + +# +# Debug Lockups and Hangs +# +CONFIG_LOCKUP_DETECTOR=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_WQ_WATCHDOG is not set +# CONFIG_PANIC_ON_OOPS is not set +CONFIG_PANIC_ON_OOPS_VALUE=0 +CONFIG_PANIC_TIMEOUT=0 +# CONFIG_SCHED_DEBUG is not set +CONFIG_SCHED_INFO=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_SCHED_STACK_END_CHECK is not set +# CONFIG_DEBUG_TIMEKEEPING is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_PREEMPT is not set + +# +# Lock Debugging (spinlocks, mutexes, etc...) +# +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_ATOMIC_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_LOCK_TORTURE_TEST is not set +# CONFIG_STACKTRACE is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_HAVE_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_PI_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set + +# +# RCU Debugging +# +# CONFIG_PROVE_RCU is not set +# CONFIG_SPARSE_RCU_POINTER is not set +# CONFIG_TORTURE_TEST is not set +# CONFIG_RCU_PERF_TEST is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_RCU_CPU_STALL_TIMEOUT=21 +# CONFIG_RCU_TRACE is not set +# CONFIG_RCU_EQS_DEBUG is not set +# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set +# CONFIG_NOTIFIER_ERROR_INJECTION is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set + +# +# Runtime Testing +# +# CONFIG_LKDTM is not set +# CONFIG_TEST_LIST_SORT is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_RBTREE_TEST is not set +# CONFIG_INTERVAL_TREE_TEST is not set +# CONFIG_PERCPU_TEST is not set +# CONFIG_ATOMIC64_SELFTEST is not set +# CONFIG_TEST_HEXDUMP is not set +# CONFIG_TEST_STRING_HELPERS is not set +# CONFIG_TEST_KSTRTOX is not set +# CONFIG_TEST_PRINTF is not set +# CONFIG_TEST_BITMAP is not set +# CONFIG_TEST_UUID is not set +# CONFIG_TEST_RHASHTABLE is not set +# CONFIG_TEST_HASH is not set +# CONFIG_DMA_API_DEBUG is not set +# CONFIG_TEST_LKM is not set +# CONFIG_TEST_USER_COPY is not set +# CONFIG_TEST_BPF is not set +# CONFIG_TEST_FIRMWARE is not set +# CONFIG_TEST_UDELAY is not set +CONFIG_MEMTEST=y +# CONFIG_TEST_STATIC_KEYS is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y +# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set +# CONFIG_UBSAN is not set +CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y +# CONFIG_STRICT_DEVMEM is not set +# CONFIG_ARM64_PTDUMP is not set +# CONFIG_PID_IN_CONTEXTIDR is not set +# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set +CONFIG_DEBUG_SET_MODULE_RONX=y +# CONFIG_DEBUG_ALIGN_RODATA is not set +# CONFIG_CORESIGHT is not set + +# +# Security options +# +CONFIG_KEYS=y +# CONFIG_PERSISTENT_KEYRINGS is not set +# CONFIG_BIG_KEYS is not set +# CONFIG_ENCRYPTED_KEYS is not set +# CONFIG_KEY_DH_OPERATIONS is not set +# CONFIG_SECURITY_DMESG_RESTRICT is not set +CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set +CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y +CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y +# CONFIG_HARDENED_USERCOPY is not set +# CONFIG_SECURITY_SMACK is not set +# CONFIG_SECURITY_TOMOYO is not set +# CONFIG_SECURITY_APPARMOR is not set +# CONFIG_SECURITY_LOADPIN is not set +# CONFIG_SECURITY_YAMA is not set +CONFIG_INTEGRITY=y +# CONFIG_INTEGRITY_SIGNATURE is not set +CONFIG_INTEGRITY_AUDIT=y +# CONFIG_IMA is not set +# CONFIG_EVM is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_XOR_BLOCKS=m +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_RNG_DEFAULT=y +CONFIG_CRYPTO_AKCIPHER2=y +CONFIG_CRYPTO_KPP2=y +# CONFIG_CRYPTO_RSA is not set +# CONFIG_CRYPTO_DH is not set +# CONFIG_CRYPTO_ECDH is not set +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_USER is not set +CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=y +CONFIG_CRYPTO_NULL2=y +# CONFIG_CRYPTO_PCRYPT is not set +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_CRYPTD=y +# CONFIG_CRYPTO_MCRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set +CONFIG_CRYPTO_ABLK_HELPER=y + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +# CONFIG_CRYPTO_CHACHA20POLY1305 is not set +CONFIG_CRYPTO_SEQIV=m +CONFIG_CRYPTO_ECHAINIV=y + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +CONFIG_CRYPTO_CTR=m +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_KEYWRAP is not set + +# +# Hash modes +# +CONFIG_CRYPTO_CMAC=m +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_CRC32 is not set +CONFIG_CRYPTO_CRCT10DIF=y +CONFIG_CRYPTO_GHASH=m +# CONFIG_CRYPTO_POLY1305 is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +CONFIG_CRYPTO_SHA256=y +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_SHA3 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_CHACHA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +# CONFIG_CRYPTO_842 is not set +# CONFIG_CRYPTO_LZ4 is not set +# CONFIG_CRYPTO_LZ4HC is not set + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=y +CONFIG_CRYPTO_DRBG_MENU=y +CONFIG_CRYPTO_DRBG_HMAC=y +# CONFIG_CRYPTO_DRBG_HASH is not set +# CONFIG_CRYPTO_DRBG_CTR is not set +CONFIG_CRYPTO_DRBG=y +CONFIG_CRYPTO_JITTERENTROPY=y +# CONFIG_CRYPTO_USER_API_HASH is not set +# CONFIG_CRYPTO_USER_API_SKCIPHER is not set +# CONFIG_CRYPTO_USER_API_RNG is not set +# CONFIG_CRYPTO_USER_API_AEAD is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_MARVELL_CESA is not set +# CONFIG_CRYPTO_DEV_FSL_CAAM is not set +# CONFIG_CRYPTO_DEV_S5P is not set +# CONFIG_CRYPTO_DEV_CCP is not set +# CONFIG_CRYPTO_DEV_QCE is not set +# CONFIG_CRYPTO_DEV_ROCKCHIP is not set +# CONFIG_ASYMMETRIC_KEY_TYPE is not set + +# +# Certificates for signature checking +# +CONFIG_ARM64_CRYPTO=y +CONFIG_CRYPTO_SHA1_ARM64_CE=y +CONFIG_CRYPTO_SHA2_ARM64_CE=y +CONFIG_CRYPTO_GHASH_ARM64_CE=y +CONFIG_CRYPTO_AES_ARM64_CE=y +CONFIG_CRYPTO_AES_ARM64_CE_CCM=y +CONFIG_CRYPTO_AES_ARM64_CE_BLK=y +# CONFIG_CRYPTO_AES_ARM64_NEON_BLK is not set +CONFIG_CRYPTO_CRC32_ARM64=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_RAID6_PQ=m +CONFIG_BITREVERSE=y +CONFIG_HAVE_ARCH_BITREVERSE=y +CONFIG_RATIONAL=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GENERIC_NET_UTILS=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_IO=y +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y +# CONFIG_CRC_CCITT is not set +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +# CONFIG_CRC32_SELFTEST is not set +CONFIG_CRC32_SLICEBY8=y +# CONFIG_CRC32_SLICEBY4 is not set +# CONFIG_CRC32_SARWATE is not set +# CONFIG_CRC32_BIT is not set +CONFIG_CRC7=y +# CONFIG_LIBCRC32C is not set +# CONFIG_CRC8 is not set +CONFIG_AUDIT_GENERIC=y +CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y +CONFIG_AUDIT_COMPAT_GENERIC=y +# CONFIG_RANDOM32_SELFTEST is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_LZ4_DECOMPRESS=y +CONFIG_XZ_DEC=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_BCJ=y +# CONFIG_XZ_DEC_TEST is not set +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_XZ=y +CONFIG_DECOMPRESS_LZO=y +CONFIG_DECOMPRESS_LZ4=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_RADIX_TREE_MULTIORDER=y +CONFIG_ASSOCIATIVE_ARRAY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +CONFIG_HAS_DMA=y +CONFIG_CPU_RMAP=y +CONFIG_DQL=y +CONFIG_GLOB=y +# CONFIG_GLOB_SELFTEST is not set +CONFIG_NLATTR=y +# CONFIG_CORDIC is not set +# CONFIG_DDR is not set +# CONFIG_IRQ_POLL is not set +CONFIG_LIBFDT=y +CONFIG_OID_REGISTRY=y +CONFIG_UCS2_STRING=y +CONFIG_FONT_SUPPORT=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_SG_SPLIT is not set +CONFIG_SG_POOL=y +CONFIG_ARCH_HAS_SG_CHAIN=y +CONFIG_SBITMAP=y diff --git a/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/m3ulcb/touch.cfg b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/m3ulcb/touch.cfg new file mode 100644 index 0000000..327c753 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/m3ulcb/touch.cfg @@ -0,0 +1 @@ +CONFIG_HID_MULTITOUCH=y diff --git a/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/m3ulcb/usb-video-class.cfg b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/m3ulcb/usb-video-class.cfg new file mode 100644 index 0000000..7446787 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/m3ulcb/usb-video-class.cfg @@ -0,0 +1,68 @@ +CONFIG_MEDIA_USB_SUPPORT=y + +# +# Webcam devices +# +CONFIG_USB_VIDEO_CLASS=y +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=m +# CONFIG_USB_M5602 is not set +# CONFIG_USB_STV06XX is not set +# CONFIG_USB_GL860 is not set +# CONFIG_USB_GSPCA_BENQ is not set +# CONFIG_USB_GSPCA_CONEX is not set +# CONFIG_USB_GSPCA_CPIA1 is not set +# CONFIG_USB_GSPCA_DTCS033 is not set +# CONFIG_USB_GSPCA_ETOMS is not set +# CONFIG_USB_GSPCA_FINEPIX is not set +# CONFIG_USB_GSPCA_JEILINJ is not set +# CONFIG_USB_GSPCA_JL2005BCD is not set +# CONFIG_USB_GSPCA_KINECT is not set +# CONFIG_USB_GSPCA_KONICA is not set +# CONFIG_USB_GSPCA_MARS is not set +# CONFIG_USB_GSPCA_MR97310A is not set +# CONFIG_USB_GSPCA_NW80X is not set +# CONFIG_USB_GSPCA_OV519 is not set +# CONFIG_USB_GSPCA_OV534 is not set +# CONFIG_USB_GSPCA_OV534_9 is not set +# CONFIG_USB_GSPCA_PAC207 is not set +# CONFIG_USB_GSPCA_PAC7302 is not set +# CONFIG_USB_GSPCA_PAC7311 is not set +# CONFIG_USB_GSPCA_SE401 is not set +# CONFIG_USB_GSPCA_SN9C2028 is not set +# CONFIG_USB_GSPCA_SN9C20X is not set +# CONFIG_USB_GSPCA_SONIXB is not set +# CONFIG_USB_GSPCA_SONIXJ is not set +# CONFIG_USB_GSPCA_SPCA500 is not set +# CONFIG_USB_GSPCA_SPCA501 is not set +# CONFIG_USB_GSPCA_SPCA505 is not set +# CONFIG_USB_GSPCA_SPCA506 is not set +# CONFIG_USB_GSPCA_SPCA508 is not set +# CONFIG_USB_GSPCA_SPCA561 is not set +# CONFIG_USB_GSPCA_SPCA1528 is not set +# CONFIG_USB_GSPCA_SQ905 is not set +# CONFIG_USB_GSPCA_SQ905C is not set +# CONFIG_USB_GSPCA_SQ930X is not set +# CONFIG_USB_GSPCA_STK014 is not set +# CONFIG_USB_GSPCA_STK1135 is not set +# CONFIG_USB_GSPCA_STV0680 is not set +# CONFIG_USB_GSPCA_SUNPLUS is not set +# CONFIG_USB_GSPCA_T613 is not set +# CONFIG_USB_GSPCA_TOPRO is not set +# CONFIG_USB_GSPCA_TOUPTEK is not set +# CONFIG_USB_GSPCA_TV8532 is not set +# CONFIG_USB_GSPCA_VC032X is not set +# CONFIG_USB_GSPCA_VICAM is not set +# CONFIG_USB_GSPCA_XIRLINK_CIT is not set +# CONFIG_USB_GSPCA_ZC3XX is not set +# CONFIG_USB_PWC is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_USB_ZR364XX is not set +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set +# CONFIG_VIDEO_USBTV is not set + +# +# Webcam, TV (analog/digital) USB devices +# +# CONFIG_VIDEO_EM28XX is not set diff --git a/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/salvator-x/defconfig b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/salvator-x/defconfig new file mode 100644 index 0000000..6547d0f --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/salvator-x/defconfig @@ -0,0 +1,5695 @@ +# +# Automatically generated file; DO NOT EDIT. +# Linux/arm64 4.9.0 Kernel Configuration +# +CONFIG_ARM64=y +CONFIG_64BIT=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y +CONFIG_MMU=y +CONFIG_DEBUG_RODATA=y +CONFIG_ARM64_PAGE_SHIFT=12 +CONFIG_ARM64_CONT_SHIFT=4 +CONFIG_ARCH_MMAP_RND_BITS_MIN=18 +CONFIG_ARCH_MMAP_RND_BITS_MAX=33 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16 +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CSUM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_HAVE_GENERIC_RCU_GUP=y +CONFIG_ARCH_DMA_ADDR_T_64BIT=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_SG_DMA_LENGTH=y +CONFIG_SMP=y +CONFIG_SWIOTLB=y +CONFIG_IOMMU_HELPER=y +CONFIG_KERNEL_MODE_NEON=y +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_PGTABLE_LEVELS=4 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_IRQ_WORK=y +CONFIG_BUILDTIME_EXTABLE_SORT=y + +# +# General setup +# +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_CROSS_COMPILE="" +# CONFIG_COMPILE_TEST is not set +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_DEFAULT_HOSTNAME="(none)" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_CROSS_MEMORY_ATTACH=y +CONFIG_FHANDLE=y +# CONFIG_USELIB is not set +CONFIG_AUDIT=y +CONFIG_HAVE_ARCH_AUDITSYSCALL=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_WATCH=y +CONFIG_AUDIT_TREE=y + +# +# IRQ subsystem +# +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y +CONFIG_GENERIC_IRQ_MIGRATION=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_DOMAIN_HIERARCHY=y +CONFIG_GENERIC_MSI_IRQ=y +CONFIG_GENERIC_MSI_IRQ_DOMAIN=y +CONFIG_HANDLE_DOMAIN_IRQ=y +# CONFIG_IRQ_DOMAIN_DEBUG is not set +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_SPARSE_IRQ=y +CONFIG_ARCH_CLOCKSOURCE_DATA=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_ARCH_HAS_TICK_BROADCAST=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y + +# +# Timers subsystem +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ_COMMON=y +# CONFIG_HZ_PERIODIC is not set +CONFIG_NO_HZ_IDLE=y +# CONFIG_NO_HZ_FULL is not set +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y + +# +# CPU/Task time and stats accounting +# +CONFIG_TICK_CPU_ACCOUNTING=y +# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set +# CONFIG_IRQ_TIME_ACCOUNTING is not set +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y + +# +# RCU Subsystem +# +CONFIG_PREEMPT_RCU=y +# CONFIG_RCU_EXPERT is not set +CONFIG_SRCU=y +# CONFIG_TASKS_RCU is not set +CONFIG_RCU_STALL_COMMON=y +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_RCU_EXPEDITE_BOOT is not set +CONFIG_BUILD_BIN2C=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y +CONFIG_CGROUPS=y +CONFIG_PAGE_COUNTER=y +CONFIG_MEMCG=y +CONFIG_MEMCG_SWAP=y +CONFIG_MEMCG_SWAP_ENABLED=y +CONFIG_BLK_CGROUP=y +# CONFIG_DEBUG_BLK_CGROUP is not set +CONFIG_CGROUP_WRITEBACK=y +CONFIG_CGROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_CFS_BANDWIDTH is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_CGROUP_PIDS=y +# CONFIG_CGROUP_FREEZER is not set +CONFIG_CGROUP_HUGETLB=y +CONFIG_CPUSETS=y +CONFIG_PROC_PID_CPUSET=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_CGROUP_PERF=y +# CONFIG_CGROUP_DEBUG is not set +# CONFIG_CHECKPOINT_RESTORE is not set +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y +CONFIG_NET_NS=y +CONFIG_SCHED_AUTOGROUP=y +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_XZ=y +CONFIG_RD_LZO=y +CONFIG_RD_LZ4=y +CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_HAVE_UID16=y +CONFIG_SYSCTL_EXCEPTION_TRACE=y +CONFIG_BPF=y +# CONFIG_EXPERT is not set +CONFIG_UID16=y +CONFIG_MULTIUSER=y +# CONFIG_SGETMASK_SYSCALL is not set +CONFIG_SYSFS_SYSCALL=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set +CONFIG_KALLSYMS_BASE_RELATIVE=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +# CONFIG_BPF_SYSCALL is not set +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_ADVISE_SYSCALLS=y +# CONFIG_USERFAULTFD is not set +CONFIG_PCI_QUIRKS=y +CONFIG_MEMBARRIER=y +# CONFIG_EMBEDDED is not set +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +CONFIG_PERF_EVENTS=y +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_COMPAT_BRK is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLAB_FREELIST_RANDOM is not set +CONFIG_SLUB_CPU_PARTIAL=y +# CONFIG_SYSTEM_DATA_VERIFICATION is not set +CONFIG_PROFILING=y +CONFIG_KEXEC_CORE=y +# CONFIG_KPROBES is not set +CONFIG_JUMP_LABEL=y +# CONFIG_STATIC_KEYS_SELFTEST is not set +# CONFIG_UPROBES is not set +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_HW_BREAKPOINT=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_RCU_TABLE_FREE=y +CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y +CONFIG_HAVE_CMPXCHG_LOCAL=y +CONFIG_HAVE_CMPXCHG_DOUBLE=y +CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_SECCOMP_FILTER=y +CONFIG_HAVE_GCC_PLUGINS=y +# CONFIG_GCC_PLUGINS is not set +CONFIG_HAVE_CC_STACKPROTECTOR=y +# CONFIG_CC_STACKPROTECTOR is not set +CONFIG_CC_STACKPROTECTOR_NONE=y +# CONFIG_CC_STACKPROTECTOR_REGULAR is not set +# CONFIG_CC_STACKPROTECTOR_STRONG is not set +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y +CONFIG_HAVE_ARCH_HUGE_VMAP=y +CONFIG_MODULES_USE_ELF_RELA=y +CONFIG_ARCH_HAS_ELF_RANDOMIZE=y +CONFIG_HAVE_ARCH_MMAP_RND_BITS=y +CONFIG_ARCH_MMAP_RND_BITS=18 +CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y +CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11 +# CONFIG_HAVE_ARCH_HASH is not set +# CONFIG_ISA_BUS_API is not set +CONFIG_CLONE_BACKWARDS=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_COMPAT_OLD_SIGACTION=y +# CONFIG_CPU_NO_EFFICIENT_FFS is not set +# CONFIG_HAVE_ARCH_VMAP_STACK is not set + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_MODULE_SIG is not set +# CONFIG_MODULE_COMPRESS is not set +# CONFIG_TRIM_UNUSED_KSYMS is not set +CONFIG_MODULES_TREE_LOOKUP=y +CONFIG_BLOCK=y +CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_BSGLIB is not set +CONFIG_BLK_DEV_INTEGRITY=y +# CONFIG_BLK_DEV_THROTTLING is not set +# CONFIG_BLK_CMDLINE_PARSER is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_EFI_PARTITION=y +CONFIG_BLOCK_COMPAT=y +CONFIG_BLK_MQ_PCI=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_CFQ_GROUP_IOSCHED is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_PREEMPT_NOTIFIERS=y +CONFIG_UNINLINE_SPIN_UNLOCK=y +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +CONFIG_LOCK_SPIN_ON_OWNER=y +CONFIG_FREEZER=y + +# +# Platform selection +# +CONFIG_ARCH_SUNXI=y +CONFIG_ARCH_ALPINE=y +# CONFIG_ARCH_BCM2835 is not set +CONFIG_ARCH_BCM_IPROC=y +CONFIG_ARCH_BERLIN=y +# CONFIG_ARCH_BRCMSTB is not set +CONFIG_ARCH_EXYNOS=y +CONFIG_ARCH_LAYERSCAPE=y +CONFIG_ARCH_LG1K=y +CONFIG_ARCH_HISI=y +CONFIG_ARCH_MEDIATEK=y +CONFIG_ARCH_MESON=y +CONFIG_ARCH_MVEBU=y +CONFIG_ARCH_QCOM=y +CONFIG_ARCH_ROCKCHIP=y +CONFIG_ARCH_SEATTLE=y +CONFIG_ARCH_SHMOBILE=y +CONFIG_ARCH_RENESAS=y +CONFIG_ARCH_R8A7795=y +CONFIG_ARCH_R8A7796=y +CONFIG_ARCH_STRATIX10=y +CONFIG_ARCH_TEGRA=y +CONFIG_ARCH_SPRD=y +CONFIG_ARCH_THUNDER=y +CONFIG_ARCH_UNIPHIER=y +CONFIG_ARCH_VEXPRESS=y +CONFIG_ARCH_VULCAN=y +CONFIG_ARCH_XGENE=y +CONFIG_ARCH_ZX=y +CONFIG_ARCH_ZYNQMP=y + +# +# Bus support +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_DOMAINS_GENERIC=y +CONFIG_PCI_SYSCALL=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCIEAER=y +# CONFIG_PCIE_ECRC is not set +# CONFIG_PCIEAER_INJECT is not set +CONFIG_PCIEASPM=y +# CONFIG_PCIEASPM_DEBUG is not set +CONFIG_PCIEASPM_DEFAULT=y +# CONFIG_PCIEASPM_POWERSAVE is not set +# CONFIG_PCIEASPM_PERFORMANCE is not set +CONFIG_PCIE_PME=y +# CONFIG_PCIE_DPC is not set +# CONFIG_PCIE_PTM is not set +CONFIG_PCI_BUS_ADDR_T_64BIT=y +CONFIG_PCI_MSI=y +CONFIG_PCI_MSI_IRQ_DOMAIN=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set +# CONFIG_PCI_STUB is not set +CONFIG_PCI_ATS=y +CONFIG_PCI_ECAM=y +CONFIG_PCI_IOV=y +# CONFIG_PCI_PRI is not set +# CONFIG_PCI_PASID is not set +CONFIG_PCI_LABEL=y +# CONFIG_HOTPLUG_PCI is not set + +# +# PCI host controller drivers +# +CONFIG_PCI_AARDVARK=y +# CONFIG_PCIE_XILINX_NWL is not set +# CONFIG_PCIE_DW_PLAT is not set +CONFIG_PCIE_DW=y +CONFIG_PCIE_RCAR=y +CONFIG_PCI_HOST_COMMON=y +CONFIG_PCI_HOST_GENERIC=y +CONFIG_PCI_XGENE=y +CONFIG_PCI_XGENE_MSI=y +CONFIG_PCI_LAYERSCAPE=y +CONFIG_PCIE_IPROC=y +CONFIG_PCIE_IPROC_PLATFORM=y +CONFIG_PCIE_IPROC_MSI=y +CONFIG_PCI_HISI=y +CONFIG_PCIE_QCOM=y +# CONFIG_PCI_HOST_THUNDER_PEM is not set +# CONFIG_PCI_HOST_THUNDER_ECAM is not set +CONFIG_PCIE_ARMADA_8K=y +# CONFIG_PCIE_ROCKCHIP is not set + +# +# Kernel Features +# + +# +# ARM errata workarounds via the alternatives framework +# +CONFIG_ARM64_ERRATUM_826319=y +CONFIG_ARM64_ERRATUM_827319=y +CONFIG_ARM64_ERRATUM_824069=y +CONFIG_ARM64_ERRATUM_819472=y +CONFIG_ARM64_ERRATUM_832075=y +CONFIG_ARM64_ERRATUM_834220=y +CONFIG_ARM64_ERRATUM_845719=y +CONFIG_ARM64_ERRATUM_843419=y +CONFIG_CAVIUM_ERRATUM_22375=y +CONFIG_CAVIUM_ERRATUM_23154=y +CONFIG_CAVIUM_ERRATUM_27456=y +CONFIG_ARM64_4K_PAGES=y +# CONFIG_ARM64_16K_PAGES is not set +# CONFIG_ARM64_64K_PAGES is not set +# CONFIG_ARM64_VA_BITS_39 is not set +CONFIG_ARM64_VA_BITS_48=y +CONFIG_ARM64_VA_BITS=48 +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SCHED_MC=y +# CONFIG_SCHED_SMT is not set +CONFIG_NR_CPUS=64 +CONFIG_HOTPLUG_CPU=y +# CONFIG_NUMA is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_PREEMPT_COUNT=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_HAVE_ARCH_PFN_VALID=y +CONFIG_HW_PERF_EVENTS=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y +CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y +CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_SPARSEMEM_VMEMMAP=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_NO_BOOTMEM=y +CONFIG_MEMORY_ISOLATION=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MEMORY_BALLOON=y +CONFIG_BALLOON_COMPACTION=y +CONFIG_COMPACTION=y +CONFIG_MIGRATION=y +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_BOUNCE=y +CONFIG_MMU_NOTIFIER=y +CONFIG_KSM=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y +# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set +CONFIG_TRANSPARENT_HUGE_PAGECACHE=y +# CONFIG_CLEANCACHE is not set +# CONFIG_FRONTSWAP is not set +CONFIG_CMA=y +# CONFIG_CMA_DEBUG is not set +# CONFIG_CMA_DEBUGFS is not set +CONFIG_CMA_AREAS=7 +# CONFIG_ZPOOL is not set +# CONFIG_ZBUD is not set +# CONFIG_ZSMALLOC is not set +CONFIG_GENERIC_EARLY_IOREMAP=y +# CONFIG_IDLE_PAGE_TRACKING is not set +CONFIG_FRAME_VECTOR=y +CONFIG_SECCOMP=y +CONFIG_PARAVIRT=y +# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set +CONFIG_KEXEC=y +CONFIG_XEN_DOM0=y +CONFIG_XEN=y +CONFIG_FORCE_MAX_ZONEORDER=11 +# CONFIG_ARMV8_DEPRECATED is not set + +# +# ARMv8.1 architectural features +# +CONFIG_ARM64_HW_AFDBM=y +CONFIG_ARM64_PAN=y +# CONFIG_ARM64_LSE_ATOMICS is not set +CONFIG_ARM64_VHE=y + +# +# ARMv8.2 architectural features +# +CONFIG_ARM64_UAO=y +CONFIG_ARM64_MODULE_CMODEL_LARGE=y +# CONFIG_RANDOMIZE_BASE is not set + +# +# Boot options +# +# CONFIG_ARM64_ACPI_PARKING_PROTOCOL is not set +CONFIG_CMDLINE="" +# CONFIG_CMDLINE_FORCE is not set +CONFIG_EFI_STUB=y +CONFIG_EFI=y +CONFIG_DMI=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_COMPAT_BINFMT_ELF=y +CONFIG_ELFCORE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_BINFMT_SCRIPT=y +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_COREDUMP=y +CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y + +# +# Power management options +# +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_HIBERNATION is not set +CONFIG_PM_SLEEP=y +CONFIG_PM_SLEEP_SMP=y +# CONFIG_PM_AUTOSLEEP is not set +# CONFIG_PM_WAKELOCKS is not set +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_OPP=y +CONFIG_PM_CLK=y +CONFIG_PM_GENERIC_DOMAINS=y +# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set +CONFIG_PM_GENERIC_DOMAINS_SLEEP=y +CONFIG_PM_GENERIC_DOMAINS_OF=y +CONFIG_CPU_PM=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# CPU Power Management +# + +# +# CPU Idle +# +CONFIG_CPU_IDLE=y +# CONFIG_CPU_IDLE_GOV_LADDER is not set +CONFIG_CPU_IDLE_GOV_MENU=y +CONFIG_DT_IDLE_STATES=y + +# +# ARM CPU Idle Drivers +# +CONFIG_ARM_CPUIDLE=y +# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_GOV_ATTR_SET=y +CONFIG_CPU_FREQ_GOV_COMMON=y +# CONFIG_CPU_FREQ_STAT is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y + +# +# CPU frequency scaling drivers +# +CONFIG_CPUFREQ_DT=y +CONFIG_CPUFREQ_DT_PLATDEV=y +CONFIG_ARM_BIG_LITTLE_CPUFREQ=y +# CONFIG_ARM_DT_BL_CPUFREQ is not set +# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set +# CONFIG_ARM_MT8173_CPUFREQ is not set +CONFIG_ARM_SCPI_CPUFREQ=y +CONFIG_ARM_TEGRA20_CPUFREQ=y +CONFIG_ARM_TEGRA124_CPUFREQ=y +# CONFIG_ACPI_CPPC_CPUFREQ is not set +CONFIG_NET=y +CONFIG_NET_INGRESS=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_DIAG is not set +CONFIG_UNIX=y +# CONFIG_UNIX_DIAG is not set +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE_DEMUX is not set +CONFIG_NET_IP_TUNNEL=m +# CONFIG_IP_MROUTE is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_NET_IPVTI is not set +# CONFIG_NET_UDP_TUNNEL is not set +# CONFIG_NET_FOU is not set +# CONFIG_NET_FOU_IP_TUNNELS is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_INET_UDP_DIAG is not set +# CONFIG_INET_DIAG_DESTROY is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_IPV6_ILA is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +# CONFIG_IPV6_VTI is not set +CONFIG_IPV6_SIT=m +# CONFIG_IPV6_SIT_6RD is not set +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_FOU is not set +# CONFIG_IPV6_FOU_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NET_PTP_CLASSIFY=y +# CONFIG_NETWORK_PHY_TIMESTAMPING is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=m + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_INGRESS=y +# CONFIG_NETFILTER_NETLINK_ACCT is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +CONFIG_NF_CONNTRACK=m +CONFIG_NF_LOG_COMMON=m +# CONFIG_NF_CONNTRACK_MARK is not set +CONFIG_NF_CONNTRACK_PROCFS=y +CONFIG_NF_CONNTRACK_EVENTS=y +# CONFIG_NF_CONNTRACK_TIMEOUT is not set +# CONFIG_NF_CONNTRACK_TIMESTAMP is not set +# CONFIG_NF_CT_PROTO_DCCP is not set +# CONFIG_NF_CT_PROTO_SCTP is not set +# CONFIG_NF_CT_PROTO_UDPLITE is not set +# CONFIG_NF_CONNTRACK_AMANDA is not set +# CONFIG_NF_CONNTRACK_FTP is not set +# CONFIG_NF_CONNTRACK_H323 is not set +# CONFIG_NF_CONNTRACK_IRC is not set +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +# CONFIG_NF_CONNTRACK_SNMP is not set +# CONFIG_NF_CONNTRACK_PPTP is not set +# CONFIG_NF_CONNTRACK_SANE is not set +# CONFIG_NF_CONNTRACK_SIP is not set +# CONFIG_NF_CONNTRACK_TFTP is not set +# CONFIG_NF_CT_NETLINK is not set +# CONFIG_NF_CT_NETLINK_TIMEOUT is not set +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +# CONFIG_NF_NAT_AMANDA is not set +# CONFIG_NF_NAT_FTP is not set +# CONFIG_NF_NAT_IRC is not set +# CONFIG_NF_NAT_SIP is not set +# CONFIG_NF_NAT_TFTP is not set +# CONFIG_NF_NAT_REDIRECT is not set +# CONFIG_NF_TABLES is not set +CONFIG_NETFILTER_XTABLES=m + +# +# Xtables combined modules +# +# CONFIG_NETFILTER_XT_MARK is not set +# CONFIG_NETFILTER_XT_CONNMARK is not set + +# +# Xtables targets +# +# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_HL is not set +# CONFIG_NETFILTER_XT_TARGET_HMARK is not set +# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set +# CONFIG_NETFILTER_XT_TARGET_LED is not set +CONFIG_NETFILTER_XT_TARGET_LOG=m +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +CONFIG_NETFILTER_XT_NAT=m +# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set +# CONFIG_NETFILTER_XT_TARGET_TEE is not set +# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set + +# +# Xtables matches +# +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +# CONFIG_NETFILTER_XT_MATCH_BPF is not set +# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set +# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set +# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set +# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +# CONFIG_NETFILTER_XT_MATCH_CPU is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ECN is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_HELPER is not set +# CONFIG_NETFILTER_XT_MATCH_HL is not set +# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set +# CONFIG_NETFILTER_XT_MATCH_L2TP is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set +# CONFIG_NETFILTER_XT_MATCH_STATE is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_IP_SET is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +# CONFIG_NF_DUP_IPV4 is not set +# CONFIG_NF_LOG_ARP is not set +CONFIG_NF_LOG_IPV4=m +CONFIG_NF_REJECT_IPV4=m +CONFIG_NF_NAT_IPV4=m +CONFIG_NF_NAT_MASQUERADE_IPV4=m +# CONFIG_NF_NAT_PPTP is not set +# CONFIG_NF_NAT_H323 is not set +CONFIG_IP_NF_IPTABLES=m +# CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_RPFILTER is not set +# CONFIG_IP_NF_MATCH_TTL is not set +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +# CONFIG_IP_NF_TARGET_SYNPROXY is not set +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_TARGET_MASQUERADE=m +# CONFIG_IP_NF_TARGET_NETMAP is not set +# CONFIG_IP_NF_TARGET_REDIRECT is not set +CONFIG_IP_NF_MANGLE=m +# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +# CONFIG_IP_NF_TARGET_ECN is not set +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_RAW is not set +# CONFIG_IP_NF_SECURITY is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV6=m +CONFIG_NF_CONNTRACK_IPV6=m +# CONFIG_NF_DUP_IPV6 is not set +CONFIG_NF_REJECT_IPV6=m +CONFIG_NF_LOG_IPV6=m +CONFIG_NF_NAT_IPV6=m +CONFIG_NF_NAT_MASQUERADE_IPV6=m +CONFIG_IP6_NF_IPTABLES=m +# CONFIG_IP6_NF_MATCH_AH is not set +# CONFIG_IP6_NF_MATCH_EUI64 is not set +# CONFIG_IP6_NF_MATCH_FRAG is not set +# CONFIG_IP6_NF_MATCH_OPTS is not set +# CONFIG_IP6_NF_MATCH_HL is not set +# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set +# CONFIG_IP6_NF_MATCH_MH is not set +# CONFIG_IP6_NF_MATCH_RPFILTER is not set +# CONFIG_IP6_NF_MATCH_RT is not set +# CONFIG_IP6_NF_TARGET_HL is not set +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +# CONFIG_IP6_NF_TARGET_SYNPROXY is not set +CONFIG_IP6_NF_MANGLE=m +# CONFIG_IP6_NF_RAW is not set +# CONFIG_IP6_NF_SECURITY is not set +CONFIG_IP6_NF_NAT=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +# CONFIG_IP6_NF_TARGET_NPT is not set +# CONFIG_BRIDGE_NF_EBTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_L2TP is not set +CONFIG_STP=m +CONFIG_GARP=m +CONFIG_MRP=m +CONFIG_BRIDGE=m +CONFIG_BRIDGE_IGMP_SNOOPING=y +CONFIG_BRIDGE_VLAN_FILTERING=y +CONFIG_HAVE_NET_DSA=y +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_VLAN_8021Q_MVRP=y +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_PHONET is not set +# CONFIG_6LOWPAN is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set +CONFIG_DNS_RESOLVER=y +# CONFIG_BATMAN_ADV is not set +# CONFIG_OPENVSWITCH is not set +# CONFIG_VSOCKETS is not set +# CONFIG_NETLINK_DIAG is not set +# CONFIG_MPLS is not set +# CONFIG_HSR is not set +# CONFIG_NET_SWITCHDEV is not set +# CONFIG_NET_L3_MASTER_DEV is not set +# CONFIG_QRTR is not set +# CONFIG_NET_NCSI is not set +CONFIG_RPS=y +CONFIG_RFS_ACCEL=y +CONFIG_XPS=y +# CONFIG_SOCK_CGROUP_DATA is not set +# CONFIG_CGROUP_NET_PRIO is not set +# CONFIG_CGROUP_NET_CLASSID is not set +CONFIG_NET_RX_BUSY_POLL=y +CONFIG_BQL=y +CONFIG_BPF_JIT=y +CONFIG_NET_FLOW_LIMIT=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_BREDR=y +# CONFIG_BT_RFCOMM is not set +# CONFIG_BT_BNEP is not set +CONFIG_BT_HIDP=m +# CONFIG_BT_HS is not set +# CONFIG_BT_LE is not set +CONFIG_BT_LEDS=y +# CONFIG_BT_SELFTEST is not set +# CONFIG_BT_DEBUGFS is not set + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIBTUSB is not set +# CONFIG_BT_HCIBTSDIO is not set +CONFIG_BT_HCIUART=m +# CONFIG_BT_HCIUART_H4 is not set +# CONFIG_BT_HCIUART_BCSP is not set +# CONFIG_BT_HCIUART_ATH3K is not set +CONFIG_BT_HCIUART_LL=y +# CONFIG_BT_HCIUART_3WIRE is not set +# CONFIG_BT_HCIUART_INTEL is not set +# CONFIG_BT_HCIUART_BCM is not set +# CONFIG_BT_HCIUART_QCA is not set +# CONFIG_BT_HCIUART_AG6XX is not set +# CONFIG_BT_HCIUART_MRVL is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_BT_MRVL is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_AF_KCM is not set +# CONFIG_STREAM_PARSER is not set +CONFIG_WIRELESS=y +CONFIG_CFG80211=m +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +CONFIG_CFG80211_DEFAULT_PS=y +# CONFIG_CFG80211_DEBUGFS is not set +# CONFIG_CFG80211_INTERNAL_REGDB is not set +CONFIG_CFG80211_CRDA_SUPPORT=y +# CONFIG_CFG80211_WEXT is not set +# CONFIG_LIB80211 is not set +CONFIG_MAC80211=m +CONFIG_MAC80211_HAS_RC=y +CONFIG_MAC80211_RC_MINSTREL=y +CONFIG_MAC80211_RC_MINSTREL_HT=y +# CONFIG_MAC80211_RC_MINSTREL_VHT is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_MESSAGE_TRACING is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 +# CONFIG_WIMAX is not set +CONFIG_RFKILL=m +CONFIG_RFKILL_LEDS=y +CONFIG_RFKILL_INPUT=y +# CONFIG_RFKILL_REGULATOR is not set +# CONFIG_RFKILL_GPIO is not set +CONFIG_NET_9P=y +CONFIG_NET_9P_VIRTIO=y +# CONFIG_NET_9P_DEBUG is not set +# CONFIG_CAIF is not set +# CONFIG_CEPH_LIB is not set +# CONFIG_NFC is not set +# CONFIG_LWTUNNEL is not set +CONFIG_DST_CACHE=y +# CONFIG_NET_DEVLINK is not set +CONFIG_MAY_USE_DEVLINK=y +CONFIG_HAVE_EBPF_JIT=y + +# +# Device Drivers +# +CONFIG_ARM_AMBA=y +CONFIG_TEGRA_AHB=y + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set +CONFIG_ALLOW_DEV_COREDUMP=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set +CONFIG_SYS_HYPERVISOR=y +# CONFIG_GENERIC_CPU_DEVICES is not set +CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_SOC_BUS=y +CONFIG_REGMAP=y +CONFIG_REGMAP_I2C=y +CONFIG_REGMAP_SPI=y +CONFIG_REGMAP_SPMI=y +CONFIG_REGMAP_MMIO=y +CONFIG_REGMAP_IRQ=y +CONFIG_DMA_SHARED_BUFFER=y +# CONFIG_FENCE_TRACE is not set +CONFIG_DMA_CMA=y + +# +# Default contiguous memory area size: +# +CONFIG_CMA_SIZE_MBYTES=16 +CONFIG_CMA_SIZE_SEL_MBYTES=y +# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set +# CONFIG_CMA_SIZE_SEL_MIN is not set +# CONFIG_CMA_SIZE_SEL_MAX is not set +CONFIG_CMA_ALIGNMENT=8 + +# +# Bus devices +# +# CONFIG_ARM_CCI400_PMU is not set +# CONFIG_ARM_CCI5xx_PMU is not set +# CONFIG_ARM_CCN is not set +# CONFIG_QCOM_EBI2 is not set +# CONFIG_SIMPLE_PM_BUS is not set +# CONFIG_SUNXI_RSB is not set +# CONFIG_TEGRA_ACONNECT is not set +CONFIG_UNIPHIER_SYSTEM_BUS=y +CONFIG_VEXPRESS_CONFIG=y +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_SM_FTL is not set +# CONFIG_MTD_OOPS is not set +# CONFIG_MTD_SWAP is not set +# CONFIG_MTD_PARTITIONED_MASTER is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_DATAFLASH is not set +CONFIG_MTD_M25P80=y +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOCG3 is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR & LPDDR2 PCM memory drivers +# +# CONFIG_MTD_LPDDR is not set +CONFIG_MTD_SPI_NOR=y +# CONFIG_MTD_MT81xx_NOR is not set +CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y +# CONFIG_SPI_FSL_QUADSPI is not set +# CONFIG_SPI_HISI_SFC is not set +# CONFIG_MTD_UBI is not set +CONFIG_DTC=y +CONFIG_OF=y +# CONFIG_OF_UNITTEST is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_ADDRESS_PCI=y +CONFIG_OF_IRQ=y +CONFIG_OF_NET=y +CONFIG_OF_MDIO=y +CONFIG_OF_PCI=y +CONFIG_OF_PCI_IRQ=y +CONFIG_OF_RESERVED_MEM=y +# CONFIG_OF_OVERLAY is not set +# CONFIG_PARPORT is not set +CONFIG_PNP=y +CONFIG_PNP_DEBUG_MESSAGES=y + +# +# Protocols +# +CONFIG_PNPACPI=y +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_NULL_BLK is not set +# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_DRBD is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SKD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_XEN_BLKDEV_FRONTEND=y +# CONFIG_XEN_BLKDEV_BACKEND is not set +CONFIG_VIRTIO_BLK=y +# CONFIG_BLK_DEV_RBD is not set +# CONFIG_BLK_DEV_RSXX is not set +# CONFIG_BLK_DEV_NVME is not set +# CONFIG_NVME_TARGET is not set + +# +# Misc devices +# +# CONFIG_SENSORS_LIS3LV02D is not set +# CONFIG_AD525X_DPOT is not set +# CONFIG_DUMMY_IRQ is not set +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_QCOM_COINCELL is not set +# CONFIG_APDS9802ALS is not set +# CONFIG_ISL29003 is not set +# CONFIG_ISL29020 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_SENSORS_BH1770 is not set +# CONFIG_SENSORS_APDS990X is not set +# CONFIG_HMC6352 is not set +# CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set +# CONFIG_USB_SWITCH_FSA9480 is not set +# CONFIG_LATTICE_ECP3_CONFIG is not set +CONFIG_SRAM=y +CONFIG_VEXPRESS_SYSCFG=y +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_EEPROM_93XX46 is not set +# CONFIG_CB710_CORE is not set + +# +# Texas Instruments shared transport line discipline +# +# CONFIG_TI_ST is not set +# CONFIG_SENSORS_LIS3_I2C is not set + +# +# Altera FPGA firmware download module +# +# CONFIG_ALTERA_STAPL is not set + +# +# Intel MIC Bus Driver +# + +# +# SCIF Bus Driver +# + +# +# VOP Bus Driver +# + +# +# Intel MIC Host Driver +# + +# +# Intel MIC Card Driver +# + +# +# SCIF Driver +# + +# +# Intel MIC Coprocessor State Management (COSM) Drivers +# + +# +# VOP Driver +# +# CONFIG_GENWQE is not set +# CONFIG_ECHO is not set +# CONFIG_CXL_BASE is not set +# CONFIG_CXL_AFU_DRIVER_OPS is not set + +# +# SCSI device support +# +CONFIG_SCSI_MOD=y +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_MQ_DEFAULT is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_SAS_ATTRS=y +CONFIG_SCSI_SAS_LIBSAS=y +CONFIG_SCSI_SAS_ATA=y +CONFIG_SCSI_SAS_HOST_SMP=y +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_ISCSI_BOOT_SYSFS is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_CXGB4_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +CONFIG_SCSI_HISI_SAS=y +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_MVUMI is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_SCSI_ESAS2R is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT3SAS is not set +# CONFIG_SCSI_MPT2SAS is not set +# CONFIG_SCSI_SMARTPQI is not set +# CONFIG_SCSI_UFSHCD is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_XEN_SCSI_FRONTEND is not set +# CONFIG_SCSI_SNIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_AM53C974 is not set +# CONFIG_SCSI_WD719X is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set +# CONFIG_SCSI_VIRTIO is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +CONFIG_HAVE_PATA_PLATFORM=y +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y +CONFIG_ATA_ACPI=y +# CONFIG_SATA_ZPODD is not set +CONFIG_SATA_PMP=y + +# +# Controllers with non-SFF native interface +# +CONFIG_SATA_AHCI=y +CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_AHCI_CEVA=y +CONFIG_AHCI_MVEBU=y +# CONFIG_AHCI_SUNXI is not set +# CONFIG_AHCI_TEGRA is not set +CONFIG_AHCI_XGENE=y +CONFIG_AHCI_QORIQ=y +# CONFIG_SATA_AHCI_SEATTLE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_SATA_ACARD_AHCI is not set +CONFIG_SATA_SIL24=y +CONFIG_ATA_SFF=y + +# +# SFF controllers with custom DMA interface +# +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_SX4 is not set +CONFIG_ATA_BMDMA=y + +# +# SATA SFF controllers with BMDMA +# +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_DWC is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_SATA_PROMISE is not set +CONFIG_SATA_RCAR=y +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_SVW is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set + +# +# PATA SFF controllers with BMDMA +# +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_ATP867X is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set +# CONFIG_PATA_SCH is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set + +# +# PIO-only SFF controllers +# +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +CONFIG_PATA_PLATFORM=y +CONFIG_PATA_OF_PLATFORM=y +# CONFIG_PATA_RZ1000 is not set + +# +# Generic fallback / legacy drivers +# +# CONFIG_PATA_ACPI is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_LEGACY is not set +# CONFIG_MD is not set +# CONFIG_TARGET_CORE is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_FIREWIRE_NOSY is not set +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_NET_CORE=y +# CONFIG_BONDING is not set +# CONFIG_DUMMY is not set +# CONFIG_EQUALIZER is not set +# CONFIG_NET_FC is not set +# CONFIG_NET_TEAM is not set +CONFIG_MACVLAN=m +CONFIG_MACVTAP=m +# CONFIG_VXLAN is not set +# CONFIG_MACSEC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +CONFIG_TUN=y +# CONFIG_TUN_VNET_CROSS_LE is not set +CONFIG_VETH=m +CONFIG_VIRTIO_NET=y +# CONFIG_NLMON is not set +# CONFIG_ARCNET is not set + +# +# CAIF transport drivers +# + +# +# Distributed Switch Architecture drivers +# +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_3COM=y +# CONFIG_VORTEX is not set +# CONFIG_TYPHOON is not set +CONFIG_NET_VENDOR_ADAPTEC=y +# CONFIG_ADAPTEC_STARFIRE is not set +CONFIG_NET_VENDOR_AGERE=y +# CONFIG_ET131X is not set +CONFIG_NET_VENDOR_ALLWINNER=y +# CONFIG_SUN4I_EMAC is not set +CONFIG_NET_VENDOR_ALTEON=y +# CONFIG_ACENIC is not set +# CONFIG_ALTERA_TSE is not set +CONFIG_NET_VENDOR_AMAZON=y +CONFIG_NET_VENDOR_AMD=y +# CONFIG_AMD8111_ETH is not set +# CONFIG_PCNET32 is not set +CONFIG_AMD_XGBE=y +CONFIG_NET_XGENE=y +CONFIG_NET_VENDOR_ARC=y +# CONFIG_ARC_EMAC is not set +# CONFIG_EMAC_ROCKCHIP is not set +CONFIG_NET_VENDOR_ATHEROS=y +# CONFIG_ATL2 is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_ALX is not set +# CONFIG_NET_VENDOR_AURORA is not set +CONFIG_NET_CADENCE=y +CONFIG_MACB=y +CONFIG_NET_VENDOR_BROADCOM=y +# CONFIG_B44 is not set +# CONFIG_BCMGENET is not set +# CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2X is not set +CONFIG_BGMAC=y +CONFIG_BGMAC_PLATFORM=y +# CONFIG_SYSTEMPORT is not set +# CONFIG_BNXT is not set +CONFIG_NET_VENDOR_BROCADE=y +# CONFIG_BNA is not set +CONFIG_NET_VENDOR_CAVIUM=y +# CONFIG_THUNDER_NIC_PF is not set +# CONFIG_THUNDER_NIC_VF is not set +# CONFIG_THUNDER_NIC_BGX is not set +# CONFIG_THUNDER_NIC_RGX is not set +# CONFIG_LIQUIDIO is not set +CONFIG_NET_VENDOR_CHELSIO=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_CHELSIO_T4 is not set +# CONFIG_CHELSIO_T4VF is not set +CONFIG_NET_VENDOR_CISCO=y +# CONFIG_ENIC is not set +# CONFIG_DNET is not set +CONFIG_NET_VENDOR_DEC=y +# CONFIG_NET_TULIP is not set +CONFIG_NET_VENDOR_DLINK=y +# CONFIG_DL2K is not set +# CONFIG_SUNDANCE is not set +CONFIG_NET_VENDOR_EMULEX=y +# CONFIG_BE2NET is not set +CONFIG_NET_VENDOR_EZCHIP=y +# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set +CONFIG_NET_VENDOR_EXAR=y +# CONFIG_S2IO is not set +# CONFIG_VXGE is not set +CONFIG_NET_VENDOR_FREESCALE=y +# CONFIG_FSL_PQ_MDIO is not set +# CONFIG_FSL_XGMAC_MDIO is not set +# CONFIG_GIANFAR is not set +CONFIG_NET_VENDOR_HISILICON=y +# CONFIG_HIX5HD2_GMAC is not set +# CONFIG_HISI_FEMAC is not set +# CONFIG_HIP04_ETH is not set +CONFIG_HNS_MDIO=y +CONFIG_HNS=y +CONFIG_HNS_DSAF=y +CONFIG_HNS_ENET=y +CONFIG_NET_VENDOR_HP=y +# CONFIG_HP100 is not set +CONFIG_NET_VENDOR_INTEL=y +# CONFIG_E100 is not set +# CONFIG_E1000 is not set +CONFIG_E1000E=y +CONFIG_IGB=y +CONFIG_IGB_HWMON=y +CONFIG_IGBVF=y +# CONFIG_IXGB is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGBEVF is not set +# CONFIG_I40E is not set +# CONFIG_I40EVF is not set +# CONFIG_FM10K is not set +CONFIG_NET_VENDOR_I825XX=y +# CONFIG_JME is not set +CONFIG_NET_VENDOR_MARVELL=y +# CONFIG_MVMDIO is not set +# CONFIG_MVNETA_BM is not set +# CONFIG_PXA168_ETH is not set +# CONFIG_SKGE is not set +CONFIG_SKY2=y +# CONFIG_SKY2_DEBUG is not set +# CONFIG_NET_VENDOR_MEDIATEK is not set +CONFIG_NET_VENDOR_MELLANOX=y +# CONFIG_MLX4_EN is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_MLX5_CORE is not set +# CONFIG_MLXSW_CORE is not set +CONFIG_NET_VENDOR_MICREL=y +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_KSZ884X_PCI is not set +CONFIG_NET_VENDOR_MICROCHIP=y +# CONFIG_ENC28J60 is not set +# CONFIG_ENCX24J600 is not set +CONFIG_NET_VENDOR_MYRI=y +# CONFIG_MYRI10GE is not set +# CONFIG_FEALNX is not set +CONFIG_NET_VENDOR_NATSEMI=y +# CONFIG_NATSEMI is not set +# CONFIG_NS83820 is not set +CONFIG_NET_VENDOR_NETRONOME=y +# CONFIG_NFP_NETVF is not set +CONFIG_NET_VENDOR_8390=y +# CONFIG_NE2K_PCI is not set +CONFIG_NET_VENDOR_NVIDIA=y +# CONFIG_FORCEDETH is not set +CONFIG_NET_VENDOR_OKI=y +# CONFIG_ETHOC is not set +CONFIG_NET_PACKET_ENGINE=y +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_NET_VENDOR_QLOGIC=y +# CONFIG_QLA3XXX is not set +# CONFIG_QLCNIC is not set +# CONFIG_QLGE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_QED is not set +CONFIG_NET_VENDOR_QUALCOMM=y +# CONFIG_QCA7000 is not set +# CONFIG_QCOM_EMAC is not set +CONFIG_NET_VENDOR_REALTEK=y +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_R8169 is not set +CONFIG_NET_VENDOR_RENESAS=y +# CONFIG_SH_ETH is not set +CONFIG_RAVB=y +CONFIG_NET_VENDOR_RDC=y +# CONFIG_R6040 is not set +CONFIG_NET_VENDOR_ROCKER=y +CONFIG_NET_VENDOR_SAMSUNG=y +# CONFIG_SXGBE_ETH is not set +CONFIG_NET_VENDOR_SEEQ=y +CONFIG_NET_VENDOR_SILAN=y +# CONFIG_SC92031 is not set +CONFIG_NET_VENDOR_SIS=y +# CONFIG_SIS900 is not set +# CONFIG_SIS190 is not set +# CONFIG_SFC is not set +CONFIG_NET_VENDOR_SMSC=y +CONFIG_SMC91X=y +# CONFIG_EPIC100 is not set +CONFIG_SMSC911X=y +# CONFIG_SMSC911X_ARCH_HOOKS is not set +# CONFIG_SMSC9420 is not set +CONFIG_NET_VENDOR_STMICRO=y +CONFIG_STMMAC_ETH=m +CONFIG_STMMAC_PLATFORM=m +CONFIG_DWMAC_GENERIC=m +CONFIG_DWMAC_IPQ806X=m +CONFIG_DWMAC_MESON=m +CONFIG_DWMAC_ROCKCHIP=m +CONFIG_DWMAC_SUNXI=m +# CONFIG_STMMAC_PCI is not set +CONFIG_NET_VENDOR_SUN=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NIU is not set +CONFIG_NET_VENDOR_SYNOPSYS=y +# CONFIG_SYNOPSYS_DWC_ETH_QOS is not set +CONFIG_NET_VENDOR_TEHUTI=y +# CONFIG_TEHUTI is not set +CONFIG_NET_VENDOR_TI=y +# CONFIG_TI_CPSW_ALE is not set +# CONFIG_TLAN is not set +CONFIG_NET_VENDOR_VIA=y +# CONFIG_VIA_RHINE is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_NET_VENDOR_WIZNET=y +# CONFIG_WIZNET_W5100 is not set +# CONFIG_WIZNET_W5300 is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_NET_SB1000 is not set +CONFIG_PHYLIB=y +CONFIG_SWPHY=y + +# +# MDIO bus device drivers +# +# CONFIG_MDIO_BCM_IPROC is not set +# CONFIG_MDIO_BCM_UNIMAC is not set +CONFIG_MDIO_BITBANG=y +CONFIG_MDIO_BUS_MUX=y +CONFIG_MDIO_BUS_MUX_BCM_IPROC=y +# CONFIG_MDIO_BUS_MUX_GPIO is not set +# CONFIG_MDIO_BUS_MUX_MMIOREG is not set +# CONFIG_MDIO_GPIO is not set +# CONFIG_MDIO_HISI_FEMAC is not set +# CONFIG_MDIO_OCTEON is not set +# CONFIG_MDIO_SUN4I is not set +# CONFIG_MDIO_THUNDER is not set +CONFIG_MDIO_XGENE=y + +# +# MII PHY device drivers +# +# CONFIG_AMD_PHY is not set +# CONFIG_AQUANTIA_PHY is not set +# CONFIG_AT803X_PHY is not set +# CONFIG_BCM7XXX_PHY is not set +# CONFIG_BCM87XX_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_DP83848_PHY is not set +# CONFIG_DP83867_PHY is not set +CONFIG_FIXED_PHY=y +# CONFIG_ICPLUS_PHY is not set +# CONFIG_INTEL_XWAY_PHY is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_MARVELL_PHY is not set +CONFIG_MICREL_PHY=y +# CONFIG_MICROCHIP_PHY is not set +# CONFIG_MICROSEMI_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_QSEMI_PHY is not set +CONFIG_REALTEK_PHY=m +# CONFIG_SMSC_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_TERANETICS_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_XILINX_GMII2RGMII is not set +# CONFIG_MICREL_KS8995MA is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +CONFIG_USB_NET_DRIVERS=y +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_RTL8152=m +# CONFIG_USB_LAN78XX is not set +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_AX88179_178A=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_CDC_EEM is not set +CONFIG_USB_NET_CDC_NCM=m +# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set +# CONFIG_USB_NET_CDC_MBIM is not set +CONFIG_USB_NET_DM9601=m +# CONFIG_USB_NET_SR9700 is not set +CONFIG_USB_NET_SR9800=m +CONFIG_USB_NET_SMSC75XX=m +CONFIG_USB_NET_SMSC95XX=m +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +# CONFIG_USB_NET_RNDIS_HOST is not set +CONFIG_USB_NET_CDC_SUBSET_ENABLE=m +CONFIG_USB_NET_CDC_SUBSET=m +# CONFIG_USB_ALI_M5632 is not set +# CONFIG_USB_AN2720 is not set +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +# CONFIG_USB_EPSON2888 is not set +# CONFIG_USB_KC2190 is not set +CONFIG_USB_NET_ZAURUS=m +# CONFIG_USB_NET_CX82310_ETH is not set +# CONFIG_USB_NET_KALMIA is not set +# CONFIG_USB_NET_QMI_WWAN is not set +# CONFIG_USB_HSO is not set +# CONFIG_USB_NET_INT51X1 is not set +# CONFIG_USB_IPHETH is not set +# CONFIG_USB_SIERRA_NET is not set +# CONFIG_USB_VL600 is not set +# CONFIG_USB_NET_CH9200 is not set +CONFIG_WLAN=y +CONFIG_WLAN_VENDOR_ADMTEK=y +# CONFIG_ADM8211 is not set +CONFIG_WLAN_VENDOR_ATH=y +# CONFIG_ATH_DEBUG is not set +# CONFIG_ATH5K is not set +# CONFIG_ATH5K_PCI is not set +# CONFIG_ATH9K is not set +# CONFIG_ATH9K_HTC is not set +# CONFIG_CARL9170 is not set +# CONFIG_ATH6KL is not set +# CONFIG_AR5523 is not set +# CONFIG_WIL6210 is not set +# CONFIG_ATH10K is not set +# CONFIG_WCN36XX is not set +CONFIG_WLAN_VENDOR_ATMEL=y +# CONFIG_ATMEL is not set +# CONFIG_AT76C50X_USB is not set +CONFIG_WLAN_VENDOR_BROADCOM=y +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_BRCMSMAC is not set +# CONFIG_BRCMFMAC is not set +CONFIG_WLAN_VENDOR_CISCO=y +CONFIG_WLAN_VENDOR_INTEL=y +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_IWL4965 is not set +# CONFIG_IWL3945 is not set +# CONFIG_IWLWIFI is not set +CONFIG_WLAN_VENDOR_INTERSIL=y +# CONFIG_HOSTAP is not set +# CONFIG_HERMES is not set +# CONFIG_P54_COMMON is not set +# CONFIG_PRISM54 is not set +CONFIG_WLAN_VENDOR_MARVELL=y +# CONFIG_LIBERTAS is not set +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_MWIFIEX is not set +# CONFIG_MWL8K is not set +CONFIG_WLAN_VENDOR_MEDIATEK=y +# CONFIG_MT7601U is not set +CONFIG_WLAN_VENDOR_RALINK=y +# CONFIG_RT2X00 is not set +CONFIG_WLAN_VENDOR_REALTEK=y +# CONFIG_RTL8180 is not set +# CONFIG_RTL8187 is not set +CONFIG_RTL_CARDS=m +# CONFIG_RTL8192CE is not set +# CONFIG_RTL8192SE is not set +# CONFIG_RTL8192DE is not set +# CONFIG_RTL8723AE is not set +# CONFIG_RTL8723BE is not set +# CONFIG_RTL8188EE is not set +# CONFIG_RTL8192EE is not set +# CONFIG_RTL8821AE is not set +# CONFIG_RTL8192CU is not set +# CONFIG_RTL8XXXU is not set +CONFIG_WLAN_VENDOR_RSI=y +# CONFIG_RSI_91X is not set +CONFIG_WLAN_VENDOR_ST=y +# CONFIG_CW1200 is not set +CONFIG_WLAN_VENDOR_TI=y +# CONFIG_WL1251 is not set +# CONFIG_WL12XX is not set +CONFIG_WL18XX=m +CONFIG_WLCORE=m +# CONFIG_WLCORE_SPI is not set +CONFIG_WLCORE_SDIO=m +CONFIG_WILINK_PLATFORM_DATA=y +CONFIG_WLAN_VENDOR_ZYDAS=y +# CONFIG_USB_ZD1201 is not set +# CONFIG_ZD1211RW is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +CONFIG_XEN_NETDEV_FRONTEND=y +# CONFIG_XEN_NETDEV_BACKEND is not set +# CONFIG_VMXNET3 is not set +# CONFIG_FUJITSU_ES is not set +# CONFIG_ISDN is not set +# CONFIG_NVM is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_LEDS=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set +# CONFIG_INPUT_MATRIXKMAP is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADC is not set +# CONFIG_KEYBOARD_ADP5588 is not set +# CONFIG_KEYBOARD_ADP5589 is not set +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_QT1070 is not set +# CONFIG_KEYBOARD_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_GPIO_POLLED is not set +# CONFIG_KEYBOARD_TCA6416 is not set +# CONFIG_KEYBOARD_TCA8418 is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_LM8333 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_MCS is not set +# CONFIG_KEYBOARD_MPR121 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_TEGRA is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_SAMSUNG is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_SH_KEYSC is not set +# CONFIG_KEYBOARD_SUN4I_LRADC is not set +# CONFIG_KEYBOARD_OMAP4 is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_CROS_EC is not set +# CONFIG_KEYBOARD_CAP11XX is not set +# CONFIG_KEYBOARD_BCM is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_BYD=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_CYPRESS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +CONFIG_MOUSE_PS2_FOCALTECH=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_CYAPA is not set +# CONFIG_MOUSE_ELAN_I2C is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +# CONFIG_MOUSE_SYNAPTICS_USB is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_AD714X is not set +# CONFIG_INPUT_ATMEL_CAPTOUCH is not set +# CONFIG_INPUT_BMA150 is not set +# CONFIG_INPUT_E3X0_BUTTON is not set +CONFIG_INPUT_PM8941_PWRKEY=y +# CONFIG_INPUT_MMA8450 is not set +# CONFIG_INPUT_MPU3050 is not set +# CONFIG_INPUT_GP2A is not set +# CONFIG_INPUT_GPIO_BEEPER is not set +# CONFIG_INPUT_GPIO_TILT_POLLED is not set +# CONFIG_INPUT_GPIO_DECODER is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_KXTJ9 is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +# CONFIG_INPUT_REGULATOR_HAPTIC is not set +# CONFIG_INPUT_UINPUT is not set +# CONFIG_INPUT_PCF8574 is not set +# CONFIG_INPUT_PWM_BEEPER is not set +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set +# CONFIG_INPUT_ADXL34X is not set +# CONFIG_INPUT_IMS_PCU is not set +# CONFIG_INPUT_CMA3000 is not set +CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y +# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set +# CONFIG_INPUT_DRV260X_HAPTICS is not set +# CONFIG_INPUT_DRV2665_HAPTICS is not set +# CONFIG_INPUT_DRV2667_HAPTICS is not set +CONFIG_INPUT_HISI_POWERKEY=y +# CONFIG_RMI4_CORE is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_AMBAKMI=y +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set +# CONFIG_SERIO_PS2MULT is not set +# CONFIG_SERIO_ARC_PS2 is not set +# CONFIG_SERIO_APBPS2 is not set +# CONFIG_SERIO_SUN4I_PS2 is not set +# CONFIG_USERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_TTY=y +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_VT_CONSOLE_SLEEP=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set +# CONFIG_N_GSM is not set +# CONFIG_TRACE_SINK is not set +CONFIG_DEVMEM=y +CONFIG_DEVKMEM=y + +# +# Serial drivers +# +CONFIG_SERIAL_EARLYCON=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y +CONFIG_SERIAL_8250_PNP=y +# CONFIG_SERIAL_8250_FINTEK is not set +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DMA=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_FSL=y +CONFIG_SERIAL_8250_DW=y +# CONFIG_SERIAL_8250_RT288X is not set +CONFIG_SERIAL_8250_MT6577=y +CONFIG_SERIAL_8250_UNIPHIER=y +# CONFIG_SERIAL_8250_MOXA is not set +CONFIG_SERIAL_OF_PLATFORM=y + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_AMBA_PL010 is not set +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set +CONFIG_SERIAL_MESON=y +CONFIG_SERIAL_MESON_CONSOLE=y +CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_UARTS_4=y +CONFIG_SERIAL_SAMSUNG_UARTS=4 +CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_SERIAL_TEGRA=y +# CONFIG_SERIAL_MAX3100 is not set +# CONFIG_SERIAL_MAX310X is not set +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=11 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +# CONFIG_SERIAL_SH_SCI_EARLYCON is not set +# CONFIG_SERIAL_SH_SCI_DMA is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_MSM=y +CONFIG_SERIAL_MSM_CONSOLE=y +# CONFIG_SERIAL_SCCNXP is not set +# CONFIG_SERIAL_SC16IS7XX is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set +# CONFIG_SERIAL_IFX6X60 is not set +CONFIG_SERIAL_XILINX_PS_UART=y +CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y +# CONFIG_SERIAL_ARC is not set +# CONFIG_SERIAL_RP2 is not set +# CONFIG_SERIAL_FSL_LPUART is not set +# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set +# CONFIG_SERIAL_SPRD is not set +CONFIG_SERIAL_MVEBU_UART=y +CONFIG_SERIAL_MVEBU_CONSOLE=y +CONFIG_SERIAL_MCTRL_GPIO=y +CONFIG_HVC_DRIVER=y +CONFIG_HVC_IRQ=y +CONFIG_HVC_XEN=y +CONFIG_HVC_XEN_FRONTEND=y +# CONFIG_HVC_DCC is not set +CONFIG_VIRTIO_CONSOLE=y +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +CONFIG_HW_RANDOM_IPROC_RNG200=m +# CONFIG_HW_RANDOM_VIRTIO is not set +CONFIG_HW_RANDOM_EXYNOS=m +CONFIG_HW_RANDOM_HISI=m +CONFIG_HW_RANDOM_MSM=m +CONFIG_HW_RANDOM_XGENE=m +CONFIG_HW_RANDOM_MESON=m +CONFIG_HW_RANDOM_CAVIUM=m +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# PCMCIA character devices +# +# CONFIG_RAW_DRIVER is not set +# CONFIG_HPET is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_XILLYBUS is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_ACPI_I2C_OPREGION=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MUX=y + +# +# Multiplexer I2C Chip support +# +# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set +# CONFIG_I2C_MUX_GPIO is not set +# CONFIG_I2C_MUX_PCA9541 is not set +CONFIG_I2C_MUX_PCA954x=y +# CONFIG_I2C_MUX_PINCTRL is not set +# CONFIG_I2C_MUX_REG is not set +# CONFIG_I2C_DEMUX_PINCTRL is not set +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_HIX5HD2 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# ACPI drivers +# +# CONFIG_I2C_SCMI is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_BCM_IPROC=y +# CONFIG_I2C_CADENCE is not set +# CONFIG_I2C_CBUS_GPIO is not set +CONFIG_I2C_DESIGNWARE_CORE=y +CONFIG_I2C_DESIGNWARE_PLATFORM=y +# CONFIG_I2C_DESIGNWARE_PCI is not set +# CONFIG_I2C_EMEV2 is not set +CONFIG_I2C_EXYNOS5=y +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_IMX=y +CONFIG_I2C_MESON=y +# CONFIG_I2C_MT65XX is not set +CONFIG_I2C_MV64XXX=y +# CONFIG_I2C_NOMADIK is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_PXA_PCI is not set +CONFIG_I2C_QUP=y +# CONFIG_I2C_RIIC is not set +# CONFIG_I2C_RK3X is not set +CONFIG_I2C_SH_MOBILE=y +# CONFIG_I2C_SIMTEC is not set +CONFIG_I2C_TEGRA=y +# CONFIG_I2C_UNIPHIER is not set +CONFIG_I2C_UNIPHIER_F=y +# CONFIG_I2C_VERSATILE is not set +# CONFIG_I2C_THUNDERX is not set +# CONFIG_I2C_XILINX is not set +# CONFIG_I2C_XLP9XX is not set +CONFIG_I2C_RCAR=y + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_DIOLAN_U2C is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_ROBOTFUZZ_OSIF is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +CONFIG_I2C_CROS_EC_TUNNEL=y +# CONFIG_I2C_XGENE_SLIMPRO is not set +# CONFIG_I2C_STUB is not set +CONFIG_I2C_SLAVE=y +# CONFIG_I2C_SLAVE_EEPROM is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_ALTERA is not set +# CONFIG_SPI_AXI_SPI_ENGINE is not set +CONFIG_SPI_BCM_QSPI=y +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_CADENCE is not set +# CONFIG_SPI_DESIGNWARE is not set +# CONFIG_SPI_GPIO is not set +# CONFIG_SPI_FSL_SPI is not set +# CONFIG_SPI_FSL_DSPI is not set +CONFIG_SPI_MESON_SPIFC=m +# CONFIG_SPI_MT65XX is not set +# CONFIG_SPI_OC_TINY is not set +CONFIG_SPI_ORION=y +CONFIG_SPI_PL022=y +# CONFIG_SPI_PXA2XX is not set +# CONFIG_SPI_PXA2XX_PCI is not set +# CONFIG_SPI_ROCKCHIP is not set +# CONFIG_SPI_RSPI is not set +CONFIG_SPI_QUP=y +CONFIG_SPI_S3C64XX=y +# CONFIG_SPI_SC18IS602 is not set +CONFIG_SPI_SH_MSIOF=y +# CONFIG_SPI_SH_MSIOF_TRANSFER_SYNC_DEBUG is not set +# CONFIG_SPI_SH_HSPI is not set +# CONFIG_SPI_SUN4I is not set +# CONFIG_SPI_SUN6I is not set +# CONFIG_SPI_TEGRA114 is not set +# CONFIG_SPI_TEGRA20_SFLASH is not set +# CONFIG_SPI_TEGRA20_SLINK is not set +# CONFIG_SPI_THUNDERX is not set +# CONFIG_SPI_XCOMM is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_XLP is not set +# CONFIG_SPI_ZYNQMP_GQSPI is not set + +# +# SPI Protocol Masters +# +CONFIG_SPI_SPIDEV=y +# CONFIG_SPI_LOOPBACK_TEST is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_SPMI=y +CONFIG_SPMI_MSM_PMIC_ARB=y +# CONFIG_HSI is not set + +# +# PPS support +# +CONFIG_PPS=y +# CONFIG_PPS_DEBUG is not set + +# +# PPS clients support +# +# CONFIG_PPS_CLIENT_KTIMER is not set +# CONFIG_PPS_CLIENT_LDISC is not set +# CONFIG_PPS_CLIENT_GPIO is not set + +# +# PPS generators support +# + +# +# PTP clock support +# +CONFIG_PTP_1588_CLOCK=y + +# +# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. +# +CONFIG_PINCTRL=y + +# +# Pin controllers +# +CONFIG_PINMUX=y +CONFIG_PINCONF=y +CONFIG_GENERIC_PINCONF=y +# CONFIG_DEBUG_PINCTRL is not set +# CONFIG_PINCTRL_AMD is not set +CONFIG_PINCTRL_MESON=y +CONFIG_PINCTRL_ROCKCHIP=y +CONFIG_PINCTRL_SINGLE=y +CONFIG_PINCTRL_MAX77620=y +CONFIG_PINCTRL_IPROC_GPIO=y +CONFIG_PINCTRL_NS2_MUX=y +# CONFIG_PINCTRL_BERLIN_BG2 is not set +# CONFIG_PINCTRL_BERLIN_BG2CD is not set +# CONFIG_PINCTRL_BERLIN_BG2Q is not set +# CONFIG_PINCTRL_BERLIN_BG4CT is not set +# CONFIG_PINCTRL_BAYTRAIL is not set +# CONFIG_PINCTRL_CHERRYVIEW is not set +# CONFIG_PINCTRL_BROXTON is not set +# CONFIG_PINCTRL_SUNRISEPOINT is not set +CONFIG_PINCTRL_MSM=y +# CONFIG_PINCTRL_APQ8064 is not set +# CONFIG_PINCTRL_APQ8084 is not set +# CONFIG_PINCTRL_IPQ4019 is not set +# CONFIG_PINCTRL_IPQ8064 is not set +# CONFIG_PINCTRL_MSM8660 is not set +# CONFIG_PINCTRL_MSM8960 is not set +# CONFIG_PINCTRL_MDM9615 is not set +# CONFIG_PINCTRL_MSM8X74 is not set +CONFIG_PINCTRL_MSM8916=y +CONFIG_PINCTRL_MSM8996=y +CONFIG_PINCTRL_QDF2XXX=y +CONFIG_PINCTRL_QCOM_SPMI_PMIC=y +# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set +CONFIG_PINCTRL_SAMSUNG=y +CONFIG_PINCTRL_EXYNOS=y +CONFIG_PINCTRL_SH_PFC=y +CONFIG_PINCTRL_PFC_R8A7795=y +CONFIG_PINCTRL_PFC_R8A7796=y +CONFIG_PINCTRL_SUNXI=y +# CONFIG_PINCTRL_SUN4I_A10 is not set +# CONFIG_PINCTRL_SUN5I_A10S is not set +# CONFIG_PINCTRL_SUN5I_A13 is not set +# CONFIG_PINCTRL_GR8 is not set +# CONFIG_PINCTRL_SUN6I_A31 is not set +# CONFIG_PINCTRL_SUN6I_A31S is not set +# CONFIG_PINCTRL_SUN6I_A31_R is not set +# CONFIG_PINCTRL_SUN7I_A20 is not set +# CONFIG_PINCTRL_SUN8I_A23 is not set +# CONFIG_PINCTRL_SUN8I_A33 is not set +# CONFIG_PINCTRL_SUN8I_A83T is not set +# CONFIG_PINCTRL_SUN8I_A23_R is not set +# CONFIG_PINCTRL_SUN8I_H3 is not set +# CONFIG_PINCTRL_SUN8I_H3_R is not set +# CONFIG_PINCTRL_SUN9I_A80 is not set +# CONFIG_PINCTRL_SUN9I_A80_R is not set +CONFIG_PINCTRL_SUN50I_A64=y +CONFIG_PINCTRL_TEGRA=y +CONFIG_PINCTRL_TEGRA124=y +CONFIG_PINCTRL_TEGRA210=y +CONFIG_PINCTRL_TEGRA_XUSB=y +CONFIG_PINCTRL_UNIPHIER=y +# CONFIG_PINCTRL_UNIPHIER_LD4 is not set +# CONFIG_PINCTRL_UNIPHIER_PRO4 is not set +# CONFIG_PINCTRL_UNIPHIER_SLD8 is not set +# CONFIG_PINCTRL_UNIPHIER_PRO5 is not set +# CONFIG_PINCTRL_UNIPHIER_PXS2 is not set +# CONFIG_PINCTRL_UNIPHIER_LD6B is not set +CONFIG_PINCTRL_UNIPHIER_LD11=y +CONFIG_PINCTRL_UNIPHIER_LD20=y +CONFIG_PINCTRL_MTK=y +# CONFIG_PINCTRL_MT2701 is not set +# CONFIG_PINCTRL_MT7623 is not set +# CONFIG_PINCTRL_MT8135 is not set +# CONFIG_PINCTRL_MT8127 is not set +CONFIG_PINCTRL_MT8173=y +# CONFIG_PINCTRL_MT6397 is not set +CONFIG_GPIOLIB=y +CONFIG_OF_GPIO=y +CONFIG_GPIO_ACPI=y +CONFIG_GPIOLIB_IRQCHIP=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_GENERIC=y + +# +# Memory mapped GPIO drivers +# +# CONFIG_GPIO_74XX_MMIO is not set +# CONFIG_GPIO_ALTERA is not set +# CONFIG_GPIO_AMDPT is not set +CONFIG_GPIO_DWAPB=y +CONFIG_GPIO_GENERIC_PLATFORM=y +# CONFIG_GPIO_GRGPIO is not set +# CONFIG_GPIO_MOCKUP is not set +# CONFIG_GPIO_MPC8XXX is not set +CONFIG_GPIO_PL061=y +CONFIG_GPIO_RCAR=y +# CONFIG_GPIO_SYSCON is not set +CONFIG_GPIO_TEGRA=y +# CONFIG_GPIO_VX855 is not set +CONFIG_GPIO_XGENE=y +# CONFIG_GPIO_XGENE_SB is not set +# CONFIG_GPIO_XILINX is not set +# CONFIG_GPIO_XLP is not set +# CONFIG_GPIO_ZYNQ is not set +# CONFIG_GPIO_ZX is not set + +# +# I2C GPIO expanders +# +# CONFIG_GPIO_ADP5588 is not set +# CONFIG_GPIO_ADNP is not set +# CONFIG_GPIO_MAX7300 is not set +# CONFIG_GPIO_MAX732X is not set +CONFIG_GPIO_PCA953X=y +CONFIG_GPIO_PCA953X_IRQ=y +# CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_SX150X is not set +# CONFIG_GPIO_TPIC2810 is not set +# CONFIG_GPIO_TS4900 is not set + +# +# MFD GPIO expanders +# +CONFIG_GPIO_MAX77620=y + +# +# PCI GPIO expanders +# +# CONFIG_GPIO_AMD8111 is not set +# CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_ML_IOH is not set +# CONFIG_GPIO_RDC321X is not set + +# +# SPI GPIO expanders +# +# CONFIG_GPIO_74X164 is not set +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MC33880 is not set +# CONFIG_GPIO_PISOSR is not set + +# +# SPI or I2C GPIO expanders +# +# CONFIG_GPIO_MCP23S08 is not set + +# +# USB GPIO expanders +# +# CONFIG_W1 is not set +CONFIG_POWER_AVS=y +# CONFIG_ROCKCHIP_IODOMAIN is not set +CONFIG_POWER_RESET=y +# CONFIG_POWER_RESET_GPIO is not set +# CONFIG_POWER_RESET_GPIO_RESTART is not set +# CONFIG_POWER_RESET_HISI is not set +CONFIG_POWER_RESET_MSM=y +# CONFIG_POWER_RESET_LTC2952 is not set +# CONFIG_POWER_RESET_RESTART is not set +CONFIG_POWER_RESET_VEXPRESS=y +CONFIG_POWER_RESET_XGENE=y +CONFIG_POWER_RESET_SYSCON=y +# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set +# CONFIG_POWER_RESET_ZX is not set +# CONFIG_SYSCON_REBOOT_MODE is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_GENERIC_ADC_BATTERY is not set +# CONFIG_TEST_POWER is not set +# CONFIG_BATTERY_DS2780 is not set +# CONFIG_BATTERY_DS2781 is not set +# CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_SBS is not set +CONFIG_BATTERY_BQ27XXX=y +CONFIG_BATTERY_BQ27XXX_I2C=y +# CONFIG_BATTERY_MAX17040 is not set +# CONFIG_BATTERY_MAX17042 is not set +# CONFIG_CHARGER_ISP1704 is not set +# CONFIG_CHARGER_MAX8903 is not set +# CONFIG_CHARGER_LP8727 is not set +# CONFIG_CHARGER_GPIO is not set +# CONFIG_CHARGER_MANAGER is not set +# CONFIG_CHARGER_QCOM_SMBB is not set +# CONFIG_CHARGER_BQ2415X is not set +# CONFIG_CHARGER_BQ24190 is not set +# CONFIG_CHARGER_BQ24257 is not set +# CONFIG_CHARGER_BQ24735 is not set +# CONFIG_CHARGER_BQ25890 is not set +# CONFIG_CHARGER_SMB347 is not set +# CONFIG_BATTERY_GAUGE_LTC2941 is not set +# CONFIG_CHARGER_RT9455 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +# CONFIG_SENSORS_AD7314 is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7310 is not set +# CONFIG_SENSORS_ADT7410 is not set +# CONFIG_SENSORS_ADT7411 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set +CONFIG_SENSORS_ARM_SCPI=y +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS620 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_FTSTEUTATES is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_G762 is not set +# CONFIG_SENSORS_GPIO_FAN is not set +# CONFIG_SENSORS_HIH6130 is not set +# CONFIG_SENSORS_IIO_HWMON is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_JC42 is not set +# CONFIG_SENSORS_POWR1220 is not set +# CONFIG_SENSORS_LINEAGE is not set +# CONFIG_SENSORS_LTC2945 is not set +# CONFIG_SENSORS_LTC2990 is not set +# CONFIG_SENSORS_LTC4151 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4222 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LTC4260 is not set +# CONFIG_SENSORS_LTC4261 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX16065 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX1668 is not set +# CONFIG_SENSORS_MAX197 is not set +# CONFIG_SENSORS_MAX31722 is not set +# CONFIG_SENSORS_MAX6639 is not set +# CONFIG_SENSORS_MAX6642 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_MAX6697 is not set +# CONFIG_SENSORS_MAX31790 is not set +# CONFIG_SENSORS_MCP3021 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM73 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +CONFIG_SENSORS_LM90=m +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LM95234 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_LM95245 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_NTC_THERMISTOR is not set +# CONFIG_SENSORS_NCT6683 is not set +# CONFIG_SENSORS_NCT6775 is not set +# CONFIG_SENSORS_NCT7802 is not set +# CONFIG_SENSORS_NCT7904 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_PMBUS is not set +# CONFIG_SENSORS_PWM_FAN is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_SHT21 is not set +# CONFIG_SENSORS_SHT3x is not set +# CONFIG_SENSORS_SHTC1 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_EMC1403 is not set +# CONFIG_SENSORS_EMC2103 is not set +# CONFIG_SENSORS_EMC6W201 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SCH56XX_COMMON is not set +# CONFIG_SENSORS_SCH5627 is not set +# CONFIG_SENSORS_SCH5636 is not set +# CONFIG_SENSORS_SMM665 is not set +# CONFIG_SENSORS_ADC128D818 is not set +# CONFIG_SENSORS_ADS1015 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_ADS7871 is not set +# CONFIG_SENSORS_AMC6821 is not set +# CONFIG_SENSORS_INA209 is not set +CONFIG_SENSORS_INA2XX=m +# CONFIG_SENSORS_INA3221 is not set +# CONFIG_SENSORS_TC74 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP102 is not set +# CONFIG_SENSORS_TMP103 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set +# CONFIG_SENSORS_VEXPRESS is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83795 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set + +# +# ACPI drivers +# +# CONFIG_SENSORS_ACPI_POWER is not set +CONFIG_THERMAL=y +CONFIG_THERMAL_HWMON=y +CONFIG_THERMAL_OF=y +# CONFIG_THERMAL_WRITABLE_TRIPS is not set +# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set +# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set +# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set +CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR=y +# CONFIG_THERMAL_GOV_FAIR_SHARE is not set +# CONFIG_THERMAL_GOV_STEP_WISE is not set +# CONFIG_THERMAL_GOV_BANG_BANG is not set +# CONFIG_THERMAL_GOV_USER_SPACE is not set +CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y +CONFIG_CPU_THERMAL=y +# CONFIG_CLOCK_THERMAL is not set +CONFIG_THERMAL_EMULATION=y +# CONFIG_HISI_THERMAL is not set +# CONFIG_MAX77620_THERMAL is not set +# CONFIG_QORIQ_THERMAL is not set +# CONFIG_ROCKCHIP_THERMAL is not set +# CONFIG_RCAR_THERMAL is not set +CONFIG_RCAR_GEN3_THERMAL=y +# CONFIG_ARMADA_THERMAL is not set + +# +# ACPI INT340X thermal drivers +# +CONFIG_MTK_THERMAL=y + +# +# Samsung thermal drivers +# +CONFIG_EXYNOS_THERMAL=y + +# +# NVIDIA Tegra thermal drivers +# +# CONFIG_TEGRA_SOCTHERM is not set +# CONFIG_QCOM_SPMI_TEMP_ALARM is not set +# CONFIG_GENERIC_ADC_THERMAL is not set + +# +# Qualcomm thermal drivers +# +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_CORE=y +# CONFIG_WATCHDOG_NOWAYOUT is not set +# CONFIG_WATCHDOG_SYSFS is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_GPIO_WATCHDOG is not set +# CONFIG_WDAT_WDT is not set +# CONFIG_XILINX_WATCHDOG is not set +# CONFIG_ZIIRAVE_WATCHDOG is not set +# CONFIG_ARM_SP805_WATCHDOG is not set +# CONFIG_ARM_SBSA_WATCHDOG is not set +# CONFIG_CADENCE_WATCHDOG is not set +CONFIG_HAVE_S3C2410_WATCHDOG=y +CONFIG_S3C2410_WATCHDOG=y +# CONFIG_DW_WATCHDOG is not set +# CONFIG_SUNXI_WATCHDOG is not set +# CONFIG_MAX63XX_WATCHDOG is not set +# CONFIG_MAX77620_WATCHDOG is not set +# CONFIG_IMX2_WDT is not set +# CONFIG_TEGRA_WATCHDOG is not set +# CONFIG_QCOM_WDT is not set +CONFIG_MESON_GXBB_WATCHDOG=m +CONFIG_MESON_WATCHDOG=m +# CONFIG_MEDIATEK_WATCHDOG is not set +CONFIG_RENESAS_WDT=y +# CONFIG_ALIM7101_WDT is not set +# CONFIG_I6300ESB_WDT is not set +# CONFIG_MEN_A21_WDT is not set +# CONFIG_XEN_WDT is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Watchdog Pretimeout Governors +# +# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set +CONFIG_BCMA_POSSIBLE=y + +# +# Broadcom specific AMBA +# +# CONFIG_BCMA is not set + +# +# Multifunction device drivers +# +CONFIG_MFD_CORE=y +# CONFIG_MFD_ACT8945A is not set +# CONFIG_MFD_AS3711 is not set +# CONFIG_MFD_AS3722 is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_AAT2870_CORE is not set +# CONFIG_MFD_ATMEL_FLEXCOM is not set +# CONFIG_MFD_ATMEL_HLCDC is not set +# CONFIG_MFD_BCM590XX is not set +# CONFIG_MFD_AXP20X_I2C is not set +CONFIG_MFD_CROS_EC=y +CONFIG_MFD_CROS_EC_I2C=y +# CONFIG_MFD_CROS_EC_SPI is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_DA9052_SPI is not set +# CONFIG_MFD_DA9052_I2C is not set +# CONFIG_MFD_DA9055 is not set +# CONFIG_MFD_DA9062 is not set +# CONFIG_MFD_DA9063 is not set +# CONFIG_MFD_DA9150 is not set +# CONFIG_MFD_DLN2 is not set +# CONFIG_MFD_EXYNOS_LPASS is not set +# CONFIG_MFD_MC13XXX_SPI is not set +# CONFIG_MFD_MC13XXX_I2C is not set +# CONFIG_MFD_HI6421_PMIC is not set +CONFIG_MFD_HI655X_PMIC=y +# CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set +# CONFIG_LPC_ICH is not set +# CONFIG_LPC_SCH is not set +# CONFIG_INTEL_SOC_PMIC is not set +# CONFIG_MFD_JANZ_CMODIO is not set +# CONFIG_MFD_KEMPLD is not set +# CONFIG_MFD_88PM800 is not set +# CONFIG_MFD_88PM805 is not set +# CONFIG_MFD_88PM860X is not set +# CONFIG_MFD_MAX14577 is not set +CONFIG_MFD_MAX77620=y +# CONFIG_MFD_MAX77686 is not set +# CONFIG_MFD_MAX77693 is not set +# CONFIG_MFD_MAX77843 is not set +# CONFIG_MFD_MAX8907 is not set +# CONFIG_MFD_MAX8925 is not set +# CONFIG_MFD_MAX8997 is not set +# CONFIG_MFD_MAX8998 is not set +# CONFIG_MFD_MT6397 is not set +# CONFIG_MFD_MENF21BMC is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_MFD_VIPERBOARD is not set +# CONFIG_MFD_RETU is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_QCOM_RPM is not set +CONFIG_MFD_SPMI_PMIC=y +# CONFIG_MFD_RDC321X is not set +# CONFIG_MFD_RTSX_PCI is not set +# CONFIG_MFD_RT5033 is not set +# CONFIG_MFD_RTSX_USB is not set +# CONFIG_MFD_RC5T583 is not set +# CONFIG_MFD_RK808 is not set +# CONFIG_MFD_RN5T618 is not set +CONFIG_MFD_SEC_CORE=y +# CONFIG_MFD_SI476X_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SKY81452 is not set +# CONFIG_MFD_SMSC is not set +# CONFIG_ABX500_CORE is not set +# CONFIG_MFD_STMPE is not set +# CONFIG_MFD_SUN6I_PRCM is not set +CONFIG_MFD_SYSCON=y +# CONFIG_MFD_TI_AM335X_TSCADC is not set +# CONFIG_MFD_LP3943 is not set +# CONFIG_MFD_LP8788 is not set +# CONFIG_MFD_PALMAS is not set +# CONFIG_TPS6105X is not set +# CONFIG_TPS65010 is not set +# CONFIG_TPS6507X is not set +# CONFIG_MFD_TPS65086 is not set +# CONFIG_MFD_TPS65090 is not set +# CONFIG_MFD_TPS65217 is not set +# CONFIG_MFD_TI_LP873X is not set +# CONFIG_MFD_TPS65218 is not set +# CONFIG_MFD_TPS6586X is not set +# CONFIG_MFD_TPS65910 is not set +# CONFIG_MFD_TPS65912_I2C is not set +# CONFIG_MFD_TPS65912_SPI is not set +# CONFIG_MFD_TPS80031 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_TWL6040_CORE is not set +# CONFIG_MFD_WL1273_CORE is not set +# CONFIG_MFD_LM3533 is not set +# CONFIG_MFD_TC3589X is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_VX855 is not set +# CONFIG_MFD_ARIZONA_I2C is not set +# CONFIG_MFD_ARIZONA_SPI is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X_I2C is not set +# CONFIG_MFD_WM831X_SPI is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set +CONFIG_MFD_VEXPRESS_SYSREG=y +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +CONFIG_REGULATOR_FIXED_VOLTAGE=y +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_ACT8865 is not set +# CONFIG_REGULATOR_AD5398 is not set +# CONFIG_REGULATOR_ANATOP is not set +CONFIG_REGULATOR_BD9571MWV=y +# CONFIG_REGULATOR_DA9210 is not set +# CONFIG_REGULATOR_DA9211 is not set +# CONFIG_REGULATOR_FAN53555 is not set +CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_HI655X=y +# CONFIG_REGULATOR_ISL9305 is not set +# CONFIG_REGULATOR_ISL6271A is not set +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_LP3972 is not set +# CONFIG_REGULATOR_LP872X is not set +# CONFIG_REGULATOR_LP8755 is not set +# CONFIG_REGULATOR_LTC3589 is not set +# CONFIG_REGULATOR_LTC3676 is not set +# CONFIG_REGULATOR_MAX1586 is not set +CONFIG_REGULATOR_MAX77620=y +# CONFIG_REGULATOR_MAX8649 is not set +# CONFIG_REGULATOR_MAX8660 is not set +# CONFIG_REGULATOR_MAX8952 is not set +# CONFIG_REGULATOR_MAX8973 is not set +# CONFIG_REGULATOR_MT6311 is not set +# CONFIG_REGULATOR_PFUZE100 is not set +# CONFIG_REGULATOR_PV88060 is not set +# CONFIG_REGULATOR_PV88080 is not set +# CONFIG_REGULATOR_PV88090 is not set +CONFIG_REGULATOR_PWM=y +CONFIG_REGULATOR_QCOM_SMD_RPM=y +CONFIG_REGULATOR_QCOM_SPMI=y +# CONFIG_REGULATOR_S2MPA01 is not set +CONFIG_REGULATOR_S2MPS11=y +# CONFIG_REGULATOR_S5M8767 is not set +# CONFIG_REGULATOR_TPS51632 is not set +# CONFIG_REGULATOR_TPS62360 is not set +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set +# CONFIG_REGULATOR_TPS6524X is not set +# CONFIG_REGULATOR_VEXPRESS is not set +CONFIG_MEDIA_SUPPORT=y + +# +# Multimedia core support +# +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_ANALOG_TV_SUPPORT=y +CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y +# CONFIG_MEDIA_RADIO_SUPPORT is not set +# CONFIG_MEDIA_SDR_SUPPORT is not set +# CONFIG_MEDIA_RC_SUPPORT is not set +CONFIG_MEDIA_CONTROLLER=y +# CONFIG_MEDIA_CONTROLLER_DVB is not set +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_SUBDEV_API=y +CONFIG_VIDEO_V4L2=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +# CONFIG_VIDEO_PCI_SKELETON is not set +CONFIG_VIDEOBUF2_CORE=y +CONFIG_VIDEOBUF2_MEMOPS=y +CONFIG_VIDEOBUF2_DMA_CONTIG=y +CONFIG_VIDEOBUF2_VMALLOC=y +CONFIG_DVB_CORE=y +# CONFIG_DVB_NET is not set +# CONFIG_TTPCI_EEPROM is not set +CONFIG_DVB_MAX_ADAPTERS=8 +# CONFIG_DVB_DYNAMIC_MINORS is not set + +# +# Media drivers +# +# CONFIG_MEDIA_USB_SUPPORT is not set +# CONFIG_MEDIA_PCI_SUPPORT is not set +CONFIG_V4L_PLATFORM_DRIVERS=y +# CONFIG_VIDEO_CAFE_CCIC is not set +# CONFIG_VIDEO_SH_VOU is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS is not set +# CONFIG_VIDEO_XILINX is not set +CONFIG_VIDEO_RCAR_VIN=y +# CONFIG_VIDEO_RCAR_VIN_DEBUG is not set +CONFIG_VIDEO_RCAR_CSI2=y +CONFIG_V4L_MEM2MEM_DRIVERS=y +# CONFIG_VIDEO_MEDIATEK_VPU is not set +# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set +# CONFIG_VIDEO_SAMSUNG_S5P_G2D is not set +# CONFIG_VIDEO_SAMSUNG_S5P_JPEG is not set +# CONFIG_VIDEO_SAMSUNG_S5P_MFC is not set +# CONFIG_VIDEO_SH_VEU is not set +# CONFIG_VIDEO_RENESAS_JPU is not set +CONFIG_VIDEO_RENESAS_FCP=y +CONFIG_VIDEO_RENESAS_VSP1=y +# CONFIG_VIDEO_RENESAS_DEBUG is not set +CONFIG_VIDEO_RENESAS_VSP_ALPHA_BIT_ARGB1555=0 +# CONFIG_V4L_TEST_DRIVERS is not set +# CONFIG_DVB_PLATFORM_DRIVERS is not set + +# +# Supported MMC/SDIO adapters +# +# CONFIG_SMS_SDIO_DRV is not set +# CONFIG_CYPRESS_FIRMWARE is not set + +# +# Media ancillary drivers (tuners, sensors, i2c, spi, frontends) +# +# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set +CONFIG_MEDIA_ATTACH=y + +# +# I2C Encoders, decoders, sensors and other helper chips +# + +# +# Audio decoders, processors and mixers +# +# CONFIG_VIDEO_TVAUDIO is not set +# CONFIG_VIDEO_TDA7432 is not set +# CONFIG_VIDEO_TDA9840 is not set +# CONFIG_VIDEO_TEA6415C is not set +# CONFIG_VIDEO_TEA6420 is not set +# CONFIG_VIDEO_MSP3400 is not set +# CONFIG_VIDEO_CS3308 is not set +# CONFIG_VIDEO_CS5345 is not set +# CONFIG_VIDEO_CS53L32A is not set +# CONFIG_VIDEO_TLV320AIC23B is not set +# CONFIG_VIDEO_UDA1342 is not set +# CONFIG_VIDEO_WM8775 is not set +# CONFIG_VIDEO_WM8739 is not set +# CONFIG_VIDEO_VP27SMPX is not set +# CONFIG_VIDEO_SONY_BTF_MPX is not set + +# +# RDS decoders +# +# CONFIG_VIDEO_SAA6588 is not set + +# +# Video decoders +# +# CONFIG_VIDEO_ADV7180 is not set +# CONFIG_VIDEO_ADV7183 is not set +CONFIG_VIDEO_ADV7482=y +# CONFIG_VIDEO_ADV7604 is not set +# CONFIG_VIDEO_ADV7842 is not set +# CONFIG_VIDEO_BT819 is not set +# CONFIG_VIDEO_BT856 is not set +# CONFIG_VIDEO_BT866 is not set +# CONFIG_VIDEO_KS0127 is not set +# CONFIG_VIDEO_ML86V7667 is not set +# CONFIG_VIDEO_AD5820 is not set +# CONFIG_VIDEO_SAA7110 is not set +# CONFIG_VIDEO_SAA711X is not set +# CONFIG_VIDEO_TC358743 is not set +# CONFIG_VIDEO_TVP514X is not set +# CONFIG_VIDEO_TVP5150 is not set +# CONFIG_VIDEO_TVP7002 is not set +# CONFIG_VIDEO_TW2804 is not set +# CONFIG_VIDEO_TW9903 is not set +# CONFIG_VIDEO_TW9906 is not set +# CONFIG_VIDEO_VPX3220 is not set + +# +# Video and audio decoders +# +# CONFIG_VIDEO_SAA717X is not set +# CONFIG_VIDEO_CX25840 is not set + +# +# Video encoders +# +# CONFIG_VIDEO_SAA7127 is not set +# CONFIG_VIDEO_SAA7185 is not set +# CONFIG_VIDEO_ADV7170 is not set +# CONFIG_VIDEO_ADV7175 is not set +# CONFIG_VIDEO_ADV7343 is not set +# CONFIG_VIDEO_ADV7393 is not set +# CONFIG_VIDEO_ADV7511 is not set +# CONFIG_VIDEO_AD9389B is not set +# CONFIG_VIDEO_AK881X is not set +# CONFIG_VIDEO_THS8200 is not set + +# +# Camera sensor devices +# +# CONFIG_VIDEO_OV2659 is not set +# CONFIG_VIDEO_OV7640 is not set +# CONFIG_VIDEO_OV7670 is not set +# CONFIG_VIDEO_OV9650 is not set +# CONFIG_VIDEO_VS6624 is not set +# CONFIG_VIDEO_MT9M032 is not set +# CONFIG_VIDEO_MT9M111 is not set +# CONFIG_VIDEO_MT9P031 is not set +# CONFIG_VIDEO_MT9T001 is not set +# CONFIG_VIDEO_MT9V011 is not set +# CONFIG_VIDEO_MT9V032 is not set +# CONFIG_VIDEO_SR030PC30 is not set +# CONFIG_VIDEO_NOON010PC30 is not set +# CONFIG_VIDEO_M5MOLS is not set +# CONFIG_VIDEO_S5K6AA is not set +# CONFIG_VIDEO_S5K6A3 is not set +# CONFIG_VIDEO_S5K4ECGX is not set +# CONFIG_VIDEO_S5K5BAF is not set +# CONFIG_VIDEO_SMIAPP is not set +# CONFIG_VIDEO_S5C73M3 is not set + +# +# Flash devices +# +# CONFIG_VIDEO_ADP1653 is not set +# CONFIG_VIDEO_AS3645A is not set +# CONFIG_VIDEO_LM3560 is not set +# CONFIG_VIDEO_LM3646 is not set + +# +# Video improvement chips +# +# CONFIG_VIDEO_UPD64031A is not set +# CONFIG_VIDEO_UPD64083 is not set + +# +# Audio/Video compression chips +# +# CONFIG_VIDEO_SAA6752HS is not set + +# +# Miscellaneous helper chips +# +# CONFIG_VIDEO_THS7303 is not set +# CONFIG_VIDEO_M52790 is not set + +# +# Sensors used on soc_camera driver +# + +# +# SPI helper chips +# +# CONFIG_VIDEO_GS1662 is not set +CONFIG_MEDIA_TUNER=y + +# +# Customize TV tuners +# +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA827X=m +CONFIG_MEDIA_TUNER_TDA18271=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MSI001=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_MT2060=m +CONFIG_MEDIA_TUNER_MT2063=m +CONFIG_MEDIA_TUNER_MT2266=m +CONFIG_MEDIA_TUNER_MT2131=m +CONFIG_MEDIA_TUNER_QT1010=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_XC4000=m +CONFIG_MEDIA_TUNER_MXL5005S=m +CONFIG_MEDIA_TUNER_MXL5007T=m +CONFIG_MEDIA_TUNER_MC44S803=m +CONFIG_MEDIA_TUNER_MAX2165=m +CONFIG_MEDIA_TUNER_TDA18218=m +CONFIG_MEDIA_TUNER_FC0011=m +CONFIG_MEDIA_TUNER_FC0012=m +CONFIG_MEDIA_TUNER_FC0013=m +CONFIG_MEDIA_TUNER_TDA18212=m +CONFIG_MEDIA_TUNER_E4000=m +CONFIG_MEDIA_TUNER_FC2580=m +CONFIG_MEDIA_TUNER_M88RS6000T=m +CONFIG_MEDIA_TUNER_TUA9001=m +CONFIG_MEDIA_TUNER_SI2157=m +CONFIG_MEDIA_TUNER_IT913X=m +CONFIG_MEDIA_TUNER_R820T=m +CONFIG_MEDIA_TUNER_MXL301RF=m +CONFIG_MEDIA_TUNER_QM1D1C0042=m + +# +# Customise DVB Frontends +# + +# +# Multistandard (satellite) frontends +# +CONFIG_DVB_STB0899=m +CONFIG_DVB_STB6100=m +CONFIG_DVB_STV090x=m +CONFIG_DVB_STV6110x=m +CONFIG_DVB_M88DS3103=m + +# +# Multistandard (cable + terrestrial) frontends +# +CONFIG_DVB_DRXK=m +CONFIG_DVB_TDA18271C2DD=m +CONFIG_DVB_SI2165=m +CONFIG_DVB_MN88472=m +CONFIG_DVB_MN88473=m + +# +# DVB-S (satellite) frontends +# +CONFIG_DVB_CX24110=m +CONFIG_DVB_CX24123=m +CONFIG_DVB_MT312=m +CONFIG_DVB_ZL10036=m +CONFIG_DVB_ZL10039=m +CONFIG_DVB_S5H1420=m +CONFIG_DVB_STV0288=m +CONFIG_DVB_STB6000=m +CONFIG_DVB_STV0299=m +CONFIG_DVB_STV6110=m +CONFIG_DVB_STV0900=m +CONFIG_DVB_TDA8083=m +CONFIG_DVB_TDA10086=m +CONFIG_DVB_TDA8261=m +CONFIG_DVB_VES1X93=m +CONFIG_DVB_TUNER_ITD1000=m +CONFIG_DVB_TUNER_CX24113=m +CONFIG_DVB_TDA826X=m +CONFIG_DVB_TUA6100=m +CONFIG_DVB_CX24116=m +CONFIG_DVB_CX24117=m +CONFIG_DVB_CX24120=m +CONFIG_DVB_SI21XX=m +CONFIG_DVB_TS2020=m +CONFIG_DVB_DS3000=m +CONFIG_DVB_MB86A16=m +CONFIG_DVB_TDA10071=m + +# +# DVB-T (terrestrial) frontends +# +CONFIG_DVB_SP8870=m +CONFIG_DVB_SP887X=m +CONFIG_DVB_CX22700=m +CONFIG_DVB_CX22702=m +CONFIG_DVB_S5H1432=m +CONFIG_DVB_DRXD=m +CONFIG_DVB_L64781=m +CONFIG_DVB_TDA1004X=m +CONFIG_DVB_NXT6000=m +CONFIG_DVB_MT352=m +CONFIG_DVB_ZL10353=m +CONFIG_DVB_DIB3000MB=m +CONFIG_DVB_DIB3000MC=m +CONFIG_DVB_DIB7000M=m +CONFIG_DVB_DIB7000P=m +CONFIG_DVB_DIB9000=m +CONFIG_DVB_TDA10048=m +CONFIG_DVB_AF9013=m +CONFIG_DVB_EC100=m +CONFIG_DVB_HD29L2=m +CONFIG_DVB_STV0367=m +CONFIG_DVB_CXD2820R=m +CONFIG_DVB_CXD2841ER=m +CONFIG_DVB_RTL2830=m +CONFIG_DVB_RTL2832=m +CONFIG_DVB_SI2168=m +# CONFIG_DVB_AS102_FE is not set +# CONFIG_DVB_GP8PSK_FE is not set + +# +# DVB-C (cable) frontends +# +CONFIG_DVB_VES1820=m +CONFIG_DVB_TDA10021=m +CONFIG_DVB_TDA10023=m +CONFIG_DVB_STV0297=m + +# +# ATSC (North American/Korean Terrestrial/Cable DTV) frontends +# +CONFIG_DVB_NXT200X=m +CONFIG_DVB_OR51211=m +CONFIG_DVB_OR51132=m +CONFIG_DVB_BCM3510=m +CONFIG_DVB_LGDT330X=m +CONFIG_DVB_LGDT3305=m +CONFIG_DVB_LGDT3306A=m +CONFIG_DVB_LG2160=m +CONFIG_DVB_S5H1409=m +CONFIG_DVB_AU8522=m +CONFIG_DVB_AU8522_DTV=m +CONFIG_DVB_AU8522_V4L=m +CONFIG_DVB_S5H1411=m + +# +# ISDB-T (terrestrial) frontends +# +CONFIG_DVB_S921=m +CONFIG_DVB_DIB8000=m +CONFIG_DVB_MB86A20S=m + +# +# ISDB-S (satellite) & ISDB-T (terrestrial) frontends +# +CONFIG_DVB_TC90522=m + +# +# Digital terrestrial only tuners/PLL +# +CONFIG_DVB_PLL=m +CONFIG_DVB_TUNER_DIB0070=m +CONFIG_DVB_TUNER_DIB0090=m + +# +# SEC control devices for DVB-S +# +CONFIG_DVB_DRX39XYJ=m +CONFIG_DVB_LNBH25=m +CONFIG_DVB_LNBP21=m +CONFIG_DVB_LNBP22=m +CONFIG_DVB_ISL6405=m +CONFIG_DVB_ISL6421=m +CONFIG_DVB_ISL6423=m +CONFIG_DVB_A8293=m +CONFIG_DVB_SP2=m +CONFIG_DVB_LGS8GL5=m +CONFIG_DVB_LGS8GXX=m +CONFIG_DVB_ATBM8830=m +CONFIG_DVB_TDA665x=m +CONFIG_DVB_IX2505V=m +CONFIG_DVB_M88RS2000=m +CONFIG_DVB_AF9033=m +CONFIG_DVB_HORUS3A=m +CONFIG_DVB_ASCOT2E=m +CONFIG_DVB_HELENE=m + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set + +# +# Graphics support +# +CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 +CONFIG_TEGRA_HOST1X=m +CONFIG_TEGRA_HOST1X_FIREWALL=y +CONFIG_DRM=y +CONFIG_DRM_MIPI_DSI=y +# CONFIG_DRM_DP_AUX_CHARDEV is not set +CONFIG_DRM_KMS_HELPER=y +CONFIG_DRM_KMS_FB_HELPER=y +CONFIG_DRM_FBDEV_EMULATION=y +# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set +CONFIG_DRM_TTM=m +CONFIG_DRM_GEM_CMA_HELPER=y +CONFIG_DRM_KMS_CMA_HELPER=y + +# +# I2C encoder or helper chips +# +CONFIG_DRM_I2C_CH7006=m +CONFIG_DRM_I2C_SIL164=m +# CONFIG_DRM_I2C_NXP_TDA998X is not set +# CONFIG_DRM_HDLCD is not set +# CONFIG_DRM_MALI_DISPLAY is not set +# CONFIG_DRM_RADEON is not set +# CONFIG_DRM_AMDGPU is not set + +# +# ACP (Audio CoProcessor) Configuration +# +CONFIG_DRM_NOUVEAU=m +CONFIG_NOUVEAU_PLATFORM_DRIVER=y +CONFIG_NOUVEAU_DEBUG=5 +CONFIG_NOUVEAU_DEBUG_DEFAULT=3 +CONFIG_DRM_NOUVEAU_BACKLIGHT=y +# CONFIG_DRM_VGEM is not set +# CONFIG_DRM_EXYNOS is not set +# CONFIG_DRM_UDL is not set +# CONFIG_DRM_AST is not set +# CONFIG_DRM_MGAG200 is not set +# CONFIG_DRM_CIRRUS_QEMU is not set +CONFIG_DRM_RCAR_DU=y +CONFIG_DRM_RCAR_HDMI=y +CONFIG_DRM_RCAR_LVDS=y +CONFIG_DRM_RCAR_VSP=y +# CONFIG_DRM_QXL is not set +# CONFIG_DRM_BOCHS is not set +# CONFIG_DRM_VIRTIO_GPU is not set +CONFIG_DRM_MSM=y +# CONFIG_DRM_MSM_REGISTER_LOGGING is not set +CONFIG_DRM_MSM_HDMI_HDCP=y +CONFIG_DRM_MSM_DSI=y +CONFIG_DRM_MSM_DSI_PLL=y +CONFIG_DRM_MSM_DSI_28NM_PHY=y +CONFIG_DRM_MSM_DSI_20NM_PHY=y +CONFIG_DRM_MSM_DSI_28NM_8960_PHY=y +CONFIG_DRM_TEGRA=m +# CONFIG_DRM_TEGRA_DEBUG is not set +CONFIG_DRM_PANEL=y + +# +# Display Panels +# +CONFIG_DRM_PANEL_SIMPLE=m +# CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set +# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set +# CONFIG_DRM_PANEL_LG_LG4573 is not set +# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set +# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set +# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set +# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set +CONFIG_DRM_BRIDGE=y + +# +# Display Interface Bridges +# +# CONFIG_DRM_ANALOGIX_ANX78XX is not set +# CONFIG_DRM_DUMB_VGA_DAC is not set +CONFIG_DRM_DW_HDMI=y +# CONFIG_DRM_DW_HDMI_AHB_AUDIO is not set +# CONFIG_DRM_NXP_PTN3460 is not set +# CONFIG_DRM_PARADE_PS8622 is not set +# CONFIG_DRM_SII902X is not set +# CONFIG_DRM_TOSHIBA_TC358767 is not set +CONFIG_DRM_I2C_ADV7511=m +CONFIG_DRM_I2C_ADV7533=y +# CONFIG_DRM_ARCPGU is not set +CONFIG_DRM_HISI_KIRIN=m +CONFIG_HISI_KIRIN_DW_DSI=m +# CONFIG_DRM_MEDIATEK is not set +# CONFIG_DRM_LEGACY is not set + +# +# Frame buffer Devices +# +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +CONFIG_FB_CMDLINE=y +CONFIG_FB_NOTIFY=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +CONFIG_FB_SYS_FILLRECT=y +CONFIG_FB_SYS_COPYAREA=y +CONFIG_FB_SYS_IMAGEBLIT=y +# CONFIG_FB_FOREIGN_ENDIAN is not set +CONFIG_FB_SYS_FOPS=y +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +CONFIG_FB_BACKLIGHT=y +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +CONFIG_FB_ARMCLCD=y +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_EFI is not set +# CONFIG_FB_OPENCORES is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_I740 is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_SH_MOBILE_LCDC is not set +# CONFIG_FB_S3C is not set +# CONFIG_FB_SMSCUFX is not set +# CONFIG_FB_UDL is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_XEN_FBDEV_FRONTEND=y +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_FB_AUO_K190X is not set +# CONFIG_FB_SIMPLE is not set +# CONFIG_FB_SH_MOBILE_MERAM is not set +# CONFIG_FB_SSD1307 is not set +# CONFIG_FB_SM712 is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_L4F00242T03 is not set +# CONFIG_LCD_LMS283GF05 is not set +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI922X is not set +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +# CONFIG_LCD_PLATFORM is not set +# CONFIG_LCD_S6E63M0 is not set +# CONFIG_LCD_LD9040 is not set +# CONFIG_LCD_AMS369FG06 is not set +# CONFIG_LCD_LMS501KF03 is not set +# CONFIG_LCD_HX8357 is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=m +# CONFIG_BACKLIGHT_PWM is not set +# CONFIG_BACKLIGHT_PM8941_WLED is not set +# CONFIG_BACKLIGHT_ADP8860 is not set +# CONFIG_BACKLIGHT_ADP8870 is not set +# CONFIG_BACKLIGHT_LM3630A is not set +# CONFIG_BACKLIGHT_LM3639 is not set +CONFIG_BACKLIGHT_LP855X=m +# CONFIG_BACKLIGHT_GPIO is not set +# CONFIG_BACKLIGHT_LV5207LP is not set +# CONFIG_BACKLIGHT_BD6107 is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEOMODE_HELPERS=y +CONFIG_HDMI=y + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_DUMMY_CONSOLE_COLUMNS=80 +CONFIG_DUMMY_CONSOLE_ROWS=25 +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=y +# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_PCM_ELD=y +CONFIG_SND_PCM_IEC958=y +CONFIG_SND_DMAENGINE_PCM=y +CONFIG_SND_JACK=y +CONFIG_SND_JACK_INPUT_DEV=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +CONFIG_SND_PCM_TIMER=y +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_PROC_FS=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_ALOOP is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_PCI=y +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CTXFI is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LOLA is not set +# CONFIG_SND_LX6464ES is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SE6X is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set + +# +# HD-Audio +# +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDA_TEGRA is not set +CONFIG_SND_HDA_PREALLOC_SIZE=64 +CONFIG_SND_SPI=y +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_UA101 is not set +# CONFIG_SND_USB_CAIAQ is not set +# CONFIG_SND_USB_6FIRE is not set +# CONFIG_SND_USB_HIFACE is not set +# CONFIG_SND_BCD2000 is not set +# CONFIG_SND_USB_POD is not set +# CONFIG_SND_USB_PODHD is not set +# CONFIG_SND_USB_TONEPORT is not set +# CONFIG_SND_USB_VARIAX is not set +CONFIG_SND_SOC=y +CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y +# CONFIG_SND_SOC_AMD_ACP is not set +# CONFIG_SND_ATMEL_SOC is not set +# CONFIG_SND_DESIGNWARE_I2S is not set + +# +# SoC Audio for Freescale CPUs +# + +# +# Common SoC Audio options for Freescale CPUs: +# +# CONFIG_SND_SOC_FSL_ASRC is not set +# CONFIG_SND_SOC_FSL_SAI is not set +# CONFIG_SND_SOC_FSL_SSI is not set +# CONFIG_SND_SOC_FSL_SPDIF is not set +# CONFIG_SND_SOC_FSL_ESAI is not set +# CONFIG_SND_SOC_IMX_AUDMUX is not set +# CONFIG_SND_KIRKWOOD_SOC is not set +# CONFIG_SND_SOC_IMG is not set +# CONFIG_SND_SOC_MT2701 is not set +# CONFIG_SND_SOC_MT8173 is not set +# CONFIG_SND_SOC_QCOM is not set +# CONFIG_SND_SOC_ROCKCHIP is not set +CONFIG_SND_SOC_SAMSUNG=y +# CONFIG_SND_SAMSUNG_PCM is not set +# CONFIG_SND_SAMSUNG_SPDIF is not set +# CONFIG_SND_SAMSUNG_I2S is not set +# CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994 is not set +# CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF is not set +# CONFIG_SND_SOC_SMDK_WM8994_PCM is not set +# CONFIG_SND_SOC_SNOW is not set +# CONFIG_SND_SOC_ARNDALE_RT5631_ALC5631 is not set + +# +# SoC Audio support for SuperH +# +# CONFIG_SND_SOC_SH4_FSI is not set +CONFIG_SND_SOC_RCAR=y + +# +# Allwinner SoC Audio support +# +# CONFIG_SND_SUN4I_CODEC is not set +# CONFIG_SND_SUN4I_I2S is not set +# CONFIG_SND_SUN4I_SPDIF is not set +# CONFIG_SND_SOC_TEGRA is not set +# CONFIG_SND_SOC_XTFPGA_I2S is not set +CONFIG_SND_SOC_I2C_AND_SPI=y + +# +# CODEC drivers +# +# CONFIG_SND_SOC_AC97_CODEC is not set +# CONFIG_SND_SOC_ADAU1701 is not set +# CONFIG_SND_SOC_ADAU7002 is not set +# CONFIG_SND_SOC_AK4104 is not set +# CONFIG_SND_SOC_AK4554 is not set +CONFIG_SND_SOC_AK4613=y +# CONFIG_SND_SOC_AK4642 is not set +# CONFIG_SND_SOC_AK5386 is not set +# CONFIG_SND_SOC_ALC5623 is not set +# CONFIG_SND_SOC_BT_SCO is not set +# CONFIG_SND_SOC_CS35L32 is not set +# CONFIG_SND_SOC_CS35L33 is not set +# CONFIG_SND_SOC_CS42L51_I2C is not set +# CONFIG_SND_SOC_CS42L52 is not set +# CONFIG_SND_SOC_CS42L56 is not set +# CONFIG_SND_SOC_CS42L73 is not set +# CONFIG_SND_SOC_CS4265 is not set +# CONFIG_SND_SOC_CS4270 is not set +# CONFIG_SND_SOC_CS4271_I2C is not set +# CONFIG_SND_SOC_CS4271_SPI is not set +# CONFIG_SND_SOC_CS42XX8_I2C is not set +# CONFIG_SND_SOC_CS4349 is not set +# CONFIG_SND_SOC_CS53L30 is not set +CONFIG_SND_SOC_HDMI_CODEC=y +# CONFIG_SND_SOC_ES8328 is not set +# CONFIG_SND_SOC_GTM601 is not set +# CONFIG_SND_SOC_INNO_RK3036 is not set +# CONFIG_SND_SOC_MAX98504 is not set +# CONFIG_SND_SOC_MAX9860 is not set +# CONFIG_SND_SOC_PCM1681 is not set +# CONFIG_SND_SOC_PCM179X_I2C is not set +# CONFIG_SND_SOC_PCM179X_SPI is not set +# CONFIG_SND_SOC_PCM3168A_I2C is not set +# CONFIG_SND_SOC_PCM3168A_SPI is not set +# CONFIG_SND_SOC_PCM512x_I2C is not set +# CONFIG_SND_SOC_PCM512x_SPI is not set +# CONFIG_SND_SOC_RT5616 is not set +# CONFIG_SND_SOC_RT5631 is not set +# CONFIG_SND_SOC_RT5677_SPI is not set +# CONFIG_SND_SOC_SGTL5000 is not set +# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set +# CONFIG_SND_SOC_SPDIF is not set +# CONFIG_SND_SOC_SSM2602_SPI is not set +# CONFIG_SND_SOC_SSM2602_I2C is not set +# CONFIG_SND_SOC_SSM4567 is not set +# CONFIG_SND_SOC_STA32X is not set +# CONFIG_SND_SOC_STA350 is not set +# CONFIG_SND_SOC_STI_SAS is not set +# CONFIG_SND_SOC_TAS2552 is not set +# CONFIG_SND_SOC_TAS5086 is not set +# CONFIG_SND_SOC_TAS571X is not set +# CONFIG_SND_SOC_TAS5720 is not set +# CONFIG_SND_SOC_TFA9879 is not set +# CONFIG_SND_SOC_TLV320AIC23_I2C is not set +# CONFIG_SND_SOC_TLV320AIC23_SPI is not set +# CONFIG_SND_SOC_TLV320AIC31XX is not set +# CONFIG_SND_SOC_TLV320AIC3X is not set +# CONFIG_SND_SOC_TS3A227E is not set +# CONFIG_SND_SOC_WM8510 is not set +# CONFIG_SND_SOC_WM8523 is not set +# CONFIG_SND_SOC_WM8580 is not set +# CONFIG_SND_SOC_WM8711 is not set +# CONFIG_SND_SOC_WM8728 is not set +# CONFIG_SND_SOC_WM8731 is not set +# CONFIG_SND_SOC_WM8737 is not set +# CONFIG_SND_SOC_WM8741 is not set +# CONFIG_SND_SOC_WM8750 is not set +# CONFIG_SND_SOC_WM8753 is not set +# CONFIG_SND_SOC_WM8770 is not set +# CONFIG_SND_SOC_WM8776 is not set +# CONFIG_SND_SOC_WM8804_I2C is not set +# CONFIG_SND_SOC_WM8804_SPI is not set +# CONFIG_SND_SOC_WM8903 is not set +# CONFIG_SND_SOC_WM8960 is not set +# CONFIG_SND_SOC_WM8962 is not set +# CONFIG_SND_SOC_WM8974 is not set +# CONFIG_SND_SOC_WM8978 is not set +# CONFIG_SND_SOC_WM8985 is not set +# CONFIG_SND_SOC_NAU8810 is not set +# CONFIG_SND_SOC_TPA6130A2 is not set +CONFIG_SND_SIMPLE_CARD_UTILS=y +CONFIG_SND_SIMPLE_CARD=y +# CONFIG_SND_SIMPLE_SCU_CARD is not set +# CONFIG_SOUND_PRIME is not set + +# +# HID support +# +CONFIG_HID=y +# CONFIG_HID_BATTERY_STRENGTH is not set +# CONFIG_HIDRAW is not set +# CONFIG_UHID is not set +CONFIG_HID_GENERIC=y + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=y +# CONFIG_HID_ACRUX is not set +CONFIG_HID_APPLE=y +# CONFIG_HID_APPLEIR is not set +# CONFIG_HID_AUREAL is not set +CONFIG_HID_BELKIN=y +# CONFIG_HID_BETOP_FF is not set +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +# CONFIG_HID_CORSAIR is not set +# CONFIG_HID_PRODIKEYS is not set +# CONFIG_HID_CMEDIA is not set +# CONFIG_HID_CP2112 is not set +CONFIG_HID_CYPRESS=y +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EMS_FF is not set +# CONFIG_HID_ELECOM is not set +# CONFIG_HID_ELO is not set +CONFIG_HID_EZKEY=y +# CONFIG_HID_GEMBIRD is not set +# CONFIG_HID_GFRM is not set +# CONFIG_HID_HOLTEK is not set +# CONFIG_HID_GT683R is not set +# CONFIG_HID_KEYTOUCH is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_UCLOGIC is not set +# CONFIG_HID_WALTOP is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_ICADE is not set +# CONFIG_HID_TWINHAN is not set +CONFIG_HID_KENSINGTON=y +# CONFIG_HID_LCPOWER is not set +# CONFIG_HID_LED is not set +# CONFIG_HID_LENOVO is not set +CONFIG_HID_LOGITECH=y +# CONFIG_HID_LOGITECH_HIDPP is not set +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGIG940_FF is not set +# CONFIG_LOGIWHEELS_FF is not set +# CONFIG_HID_MAGICMOUSE is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +# CONFIG_HID_MULTITOUCH is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_ORTEK is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PENMOUNT is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_PICOLCD is not set +# CONFIG_HID_PLANTRONICS is not set +# CONFIG_HID_PRIMAX is not set +# CONFIG_HID_ROCCAT is not set +# CONFIG_HID_SAITEK is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SPEEDLINK is not set +# CONFIG_HID_STEELSERIES is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_RMI is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TIVO is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THINGM is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_WACOM is not set +# CONFIG_HID_WIIMOTE is not set +# CONFIG_HID_XINMO is not set +# CONFIG_HID_ZEROPLUS is not set +# CONFIG_HID_ZYDACRON is not set +# CONFIG_HID_SENSOR_HUB is not set +# CONFIG_HID_ALPS is not set + +# +# USB HID support +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# I2C HID support +# +# CONFIG_I2C_HID is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_SUPPORT=y +CONFIG_USB_COMMON=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB=y +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEFAULT_PERSIST=y +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_OTG=y +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_OTG_FSM is not set +# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_PCI=y +CONFIG_USB_XHCI_PLATFORM=y +# CONFIG_USB_XHCI_MTK is not set +# CONFIG_USB_XHCI_MVEBU is not set +CONFIG_USB_XHCI_RCAR=y +CONFIG_USB_XHCI_TEGRA=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +CONFIG_USB_EHCI_PCI=y +CONFIG_USB_EHCI_MSM=y +# CONFIG_USB_EHCI_TEGRA is not set +CONFIG_USB_EHCI_EXYNOS=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_FOTG210_HCD is not set +# CONFIG_USB_MAX3421_HCD is not set +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PCI=y +CONFIG_USB_OHCI_EXYNOS=y +CONFIG_USB_OHCI_HCD_PLATFORM=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_RENESAS_USBHS_HCD is not set +# CONFIG_USB_HCD_TEST_MODE is not set +CONFIG_USB_RENESAS_USBHS=y + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_REALTEK is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_STORAGE_ENE_UB6250 is not set +# CONFIG_USB_UAS is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USBIP_CORE is not set +# CONFIG_USB_MUSB_HDRC is not set +CONFIG_USB_DWC3=y +# CONFIG_USB_DWC3_HOST is not set +# CONFIG_USB_DWC3_GADGET is not set +CONFIG_USB_DWC3_DUAL_ROLE=y + +# +# Platform Glue Driver Support +# +CONFIG_USB_DWC3_EXYNOS=y +CONFIG_USB_DWC3_PCI=y +CONFIG_USB_DWC3_OF_SIMPLE=y +CONFIG_USB_DWC2=y +# CONFIG_USB_DWC2_HOST is not set + +# +# Gadget/Dual-role mode requires USB Gadget support to be enabled +# +# CONFIG_USB_DWC2_PERIPHERAL is not set +CONFIG_USB_DWC2_DUAL_ROLE=y +# CONFIG_USB_DWC2_PCI is not set +# CONFIG_USB_DWC2_DEBUG is not set +# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_OF=y +CONFIG_USB_CHIPIDEA_UDC=y +CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_ISP1760=y +CONFIG_USB_ISP1760_HCD=y +CONFIG_USB_ISP1761_UDC=y +# CONFIG_USB_ISP1760_HOST_ROLE is not set +# CONFIG_USB_ISP1760_GADGET_ROLE is not set +CONFIG_USB_ISP1760_DUAL_ROLE=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_EHSET_TEST_FIXTURE is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_YUREX is not set +# CONFIG_USB_EZUSB_FX2 is not set +CONFIG_USB_HSIC_USB3503=y +# CONFIG_USB_HSIC_USB4604 is not set +# CONFIG_USB_LINK_LAYER_TEST is not set +# CONFIG_USB_CHAOSKEY is not set +# CONFIG_UCSI is not set + +# +# USB Physical Layer drivers +# +CONFIG_USB_PHY=y +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_USB_ISP1301 is not set +CONFIG_USB_MSM_OTG=y +# CONFIG_USB_QCOM_8X16_PHY is not set +CONFIG_USB_ULPI=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 + +# +# USB Peripheral Controller +# +# CONFIG_USB_FOTG210_UDC is not set +# CONFIG_USB_GR_UDC is not set +# CONFIG_USB_R8A66597 is not set +CONFIG_USB_RENESAS_USBHS_UDC=y +# CONFIG_USB_RENESAS_USB3 is not set +# CONFIG_USB_PXA27X is not set +# CONFIG_USB_MV_UDC is not set +# CONFIG_USB_MV_U3D is not set +# CONFIG_USB_M66592 is not set +# CONFIG_USB_BDC_UDC is not set +# CONFIG_USB_AMD5536UDC is not set +# CONFIG_USB_NET2272 is not set +# CONFIG_USB_NET2280 is not set +# CONFIG_USB_GOKU is not set +# CONFIG_USB_EG20T is not set +# CONFIG_USB_GADGET_XILINX is not set +# CONFIG_USB_DUMMY_HCD is not set +# CONFIG_USB_CONFIGFS is not set +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_G_NCM is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FUNCTIONFS is not set +# CONFIG_USB_MASS_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_ACM_MS is not set +# CONFIG_USB_G_MULTI is not set +# CONFIG_USB_G_HID is not set +# CONFIG_USB_G_DBGP is not set +# CONFIG_USB_G_WEBCAM is not set +# CONFIG_USB_LED_TRIG is not set +# CONFIG_USB_ULPI_BUS is not set +# CONFIG_UWB is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_PWRSEQ_EMMC=y +CONFIG_PWRSEQ_SIMPLE=y + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_MINORS=32 +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_ARMMMCI=y +CONFIG_MMC_QCOM_DML=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_IO_ACCESSORS=y +# CONFIG_MMC_SDHCI_PCI is not set +CONFIG_MMC_SDHCI_ACPI=y +CONFIG_MMC_SDHCI_PLTFM=y +# CONFIG_MMC_SDHCI_OF_ARASAN is not set +# CONFIG_MMC_SDHCI_OF_AT91 is not set +CONFIG_MMC_SDHCI_OF_ESDHC=y +CONFIG_MMC_SDHCI_TEGRA=y +# CONFIG_MMC_SDHCI_PXAV3 is not set +# CONFIG_MMC_SDHCI_F_SDH30 is not set +CONFIG_MMC_SDHCI_IPROC=y +CONFIG_MMC_SDHCI_MSM=y +# CONFIG_MMC_TIFM_SD is not set +CONFIG_MMC_SPI=y +CONFIG_MMC_TMIO_CORE=y +CONFIG_MMC_SDHI=y +# CONFIG_MMC_SDHI_PIO is not set +# CONFIG_MMC_CB710 is not set +# CONFIG_MMC_VIA_SDMMC is not set +CONFIG_MMC_DW=y +CONFIG_MMC_DW_PLTFM=y +CONFIG_MMC_DW_EXYNOS=y +CONFIG_MMC_DW_K3=y +# CONFIG_MMC_DW_PCI is not set +# CONFIG_MMC_DW_ROCKCHIP is not set +# CONFIG_MMC_SH_MMCIF is not set +# CONFIG_MMC_VUB300 is not set +# CONFIG_MMC_USHC is not set +# CONFIG_MMC_USDHI6ROL0 is not set +CONFIG_MMC_SUNXI=y +# CONFIG_MMC_TOSHIBA_PCI is not set +# CONFIG_MMC_MTK is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +# CONFIG_LEDS_CLASS_FLASH is not set + +# +# LED drivers +# +# CONFIG_LEDS_BCM6328 is not set +# CONFIG_LEDS_BCM6358 is not set +# CONFIG_LEDS_LM3530 is not set +# CONFIG_LEDS_LM3642 is not set +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_LP3952 is not set +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP5523 is not set +# CONFIG_LEDS_LP5562 is not set +# CONFIG_LEDS_LP8501 is not set +# CONFIG_LEDS_LP8860 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_PCA963X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_PWM is not set +# CONFIG_LEDS_REGULATOR is not set +# CONFIG_LEDS_BD2802 is not set +# CONFIG_LEDS_LT3593 is not set +# CONFIG_LEDS_TCA6507 is not set +# CONFIG_LEDS_TLC591XX is not set +# CONFIG_LEDS_LM355x is not set +# CONFIG_LEDS_IS31FL319X is not set +# CONFIG_LEDS_IS31FL32XX is not set + +# +# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) +# +# CONFIG_LEDS_BLINKM is not set +CONFIG_LEDS_SYSCON=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +# CONFIG_LEDS_TRIGGER_ONESHOT is not set +# CONFIG_LEDS_TRIGGER_DISK is not set +# CONFIG_LEDS_TRIGGER_MTD is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +CONFIG_LEDS_TRIGGER_CPU=y +# CONFIG_LEDS_TRIGGER_GPIO is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_LEDS_TRIGGER_TRANSIENT is not set +# CONFIG_LEDS_TRIGGER_CAMERA is not set +# CONFIG_LEDS_TRIGGER_PANIC is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_EDAC_SUPPORT=y +# CONFIG_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +CONFIG_RTC_SYSTOHC=y +CONFIG_RTC_SYSTOHC_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_ABB5ZES3 is not set +# CONFIG_RTC_DRV_ABX80X is not set +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_HYM8563 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +CONFIG_RTC_DRV_MAX77686=y +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_ISL12022 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8523 is not set +# CONFIG_RTC_DRV_PCF85063 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8010 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set +# CONFIG_RTC_DRV_EM3027 is not set +# CONFIG_RTC_DRV_RV8803 is not set +CONFIG_RTC_DRV_S5M=y + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T93 is not set +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1302 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1343 is not set +# CONFIG_RTC_DRV_DS1347 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6916 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RX4581 is not set +# CONFIG_RTC_DRV_RX6110 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_PCF2123 is not set +# CONFIG_RTC_DRV_MCP795 is not set +CONFIG_RTC_I2C_AND_SPI=y + +# +# SPI and I2C RTC drivers +# +CONFIG_RTC_DRV_DS3232=y +# CONFIG_RTC_DRV_PCF2127 is not set +# CONFIG_RTC_DRV_RV3029C2 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1685_FAMILY is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_DS2404 is not set +CONFIG_RTC_DRV_EFI=y +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set +# CONFIG_RTC_DRV_ZYNQMP is not set + +# +# on-CPU RTC drivers +# +CONFIG_HAVE_S3C_RTC=y +CONFIG_RTC_DRV_S3C=y +# CONFIG_RTC_DRV_PL030 is not set +CONFIG_RTC_DRV_PL031=y +CONFIG_RTC_DRV_SUN6I=y +# CONFIG_RTC_DRV_MV is not set +# CONFIG_RTC_DRV_ARMADA38X is not set +# CONFIG_RTC_DRV_PM8XXX is not set +CONFIG_RTC_DRV_TEGRA=y +# CONFIG_RTC_DRV_SNVS is not set +CONFIG_RTC_DRV_XGENE=y + +# +# HID Sensor RTC drivers +# +# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set +CONFIG_DMADEVICES=y +# CONFIG_DMADEVICES_DEBUG is not set + +# +# DMA Devices +# +CONFIG_DMA_ENGINE=y +CONFIG_DMA_VIRTUAL_CHANNELS=y +CONFIG_DMA_ACPI=y +CONFIG_DMA_OF=y +# CONFIG_AMBA_PL08X is not set +# CONFIG_FSL_EDMA is not set +# CONFIG_INTEL_IDMA64 is not set +# CONFIG_K3_DMA is not set +# CONFIG_MV_XOR is not set +# CONFIG_MV_XOR_V2 is not set +CONFIG_PL330_DMA=y +CONFIG_TEGRA20_APB_DMA=y +# CONFIG_TEGRA210_ADMA is not set +# CONFIG_XGENE_DMA is not set +# CONFIG_XILINX_DMA is not set +# CONFIG_XILINX_ZYNQMP_DMA is not set +# CONFIG_ZX_DMA is not set +CONFIG_QCOM_BAM_DMA=y +CONFIG_QCOM_HIDMA_MGMT=y +CONFIG_QCOM_HIDMA=y +# CONFIG_DW_DMAC is not set +# CONFIG_DW_DMAC_PCI is not set +CONFIG_RENESAS_DMA=y +CONFIG_SH_DMAE_BASE=y +# CONFIG_SH_DMAE is not set +CONFIG_RCAR_DMAC=y +CONFIG_RENESAS_USB_DMAC=y +# CONFIG_SUDMAC is not set + +# +# DMA Clients +# +# CONFIG_ASYNC_TX_DMA is not set +# CONFIG_DMATEST is not set + +# +# DMABUF options +# +CONFIG_SYNC_FILE=y +# CONFIG_SW_SYNC is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set +CONFIG_VFIO_IOMMU_TYPE1=y +CONFIG_VFIO_VIRQFD=y +CONFIG_VFIO=y +# CONFIG_VFIO_NOIOMMU is not set +CONFIG_VFIO_PCI=y +CONFIG_VFIO_PCI_MMAP=y +CONFIG_VFIO_PCI_INTX=y +# CONFIG_VFIO_PLATFORM is not set +CONFIG_IRQ_BYPASS_MANAGER=y +# CONFIG_VIRT_DRIVERS is not set +CONFIG_VIRTIO=y + +# +# Virtio drivers +# +CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_PCI_LEGACY=y +CONFIG_VIRTIO_BALLOON=y +# CONFIG_VIRTIO_INPUT is not set +CONFIG_VIRTIO_MMIO=y +# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set + +# +# Microsoft Hyper-V guest support +# + +# +# Xen driver support +# +CONFIG_XEN_BALLOON=y +CONFIG_XEN_SCRUB_PAGES=y +CONFIG_XEN_DEV_EVTCHN=y +CONFIG_XEN_BACKEND=y +CONFIG_XENFS=y +CONFIG_XEN_COMPAT_XENFS=y +CONFIG_XEN_SYS_HYPERVISOR=y +CONFIG_XEN_XENBUS_FRONTEND=y +CONFIG_XEN_GNTDEV=y +CONFIG_XEN_GRANT_DEV_ALLOC=y +CONFIG_SWIOTLB_XEN=y +CONFIG_XEN_PRIVCMD=y +CONFIG_XEN_EFI=y +CONFIG_XEN_AUTO_XLATE=y +# CONFIG_STAGING is not set +# CONFIG_GOLDFISH is not set +CONFIG_CHROME_PLATFORMS=y +# CONFIG_CROS_EC_CHARDEV is not set +CONFIG_CROS_EC_PROTO=y +# CONFIG_CROS_KBD_LED_BACKLIGHT is not set +CONFIG_CLKDEV_LOOKUP=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_COMMON_CLK=y + +# +# Common Clock Framework +# +CONFIG_COMMON_CLK_VERSATILE=y +CONFIG_CLK_SP810=y +CONFIG_CLK_VEXPRESS_OSC=y +# CONFIG_COMMON_CLK_MAX77686 is not set +CONFIG_COMMON_CLK_SCPI=y +# CONFIG_COMMON_CLK_SI5351 is not set +# CONFIG_COMMON_CLK_SI514 is not set +# CONFIG_COMMON_CLK_SI570 is not set +# CONFIG_COMMON_CLK_CDCE706 is not set +# CONFIG_COMMON_CLK_CDCE925 is not set +CONFIG_COMMON_CLK_CS2000_CP=y +CONFIG_COMMON_CLK_S2MPS11=y +CONFIG_CLK_QORIQ=y +CONFIG_COMMON_CLK_XGENE=y +# CONFIG_COMMON_CLK_NXP is not set +# CONFIG_COMMON_CLK_PWM is not set +CONFIG_COMMON_CLK_5P49V5923A=y +# CONFIG_COMMON_CLK_PXA is not set +# CONFIG_COMMON_CLK_PIC32 is not set +CONFIG_COMMON_CLK_IPROC=y +CONFIG_CLK_BCM_NS2=y +CONFIG_COMMON_CLK_HI3519=y +CONFIG_COMMON_CLK_HI6220=y +CONFIG_RESET_HISI=y +# CONFIG_STUB_CLK_HI6220 is not set +CONFIG_COMMON_CLK_MEDIATEK=y +CONFIG_COMMON_CLK_MT8135=y +CONFIG_COMMON_CLK_MT8173=y +CONFIG_COMMON_CLK_AMLOGIC=y +CONFIG_COMMON_CLK_GXBB=y +CONFIG_ARMADA_37XX_CLK=y +CONFIG_ARMADA_AP806_SYSCON=y +CONFIG_ARMADA_CP110_SYSCON=y +CONFIG_QCOM_GDSC=y +CONFIG_COMMON_CLK_QCOM=y +# CONFIG_APQ_GCC_8084 is not set +# CONFIG_APQ_MMCC_8084 is not set +# CONFIG_IPQ_GCC_4019 is not set +# CONFIG_IPQ_GCC_806X is not set +# CONFIG_IPQ_LCC_806X is not set +# CONFIG_MSM_GCC_8660 is not set +CONFIG_MSM_GCC_8916=y +# CONFIG_MSM_GCC_8960 is not set +# CONFIG_MSM_LCC_8960 is not set +# CONFIG_MDM_GCC_9615 is not set +# CONFIG_MDM_LCC_9615 is not set +# CONFIG_MSM_MMCC_8960 is not set +# CONFIG_MSM_GCC_8974 is not set +# CONFIG_MSM_MMCC_8974 is not set +CONFIG_MSM_GCC_8996=y +CONFIG_MSM_MMCC_8996=y +CONFIG_CLK_RENESAS_CPG_MSSR=y +CONFIG_COMMON_CLK_SAMSUNG=y +CONFIG_EXYNOS_ARM64_COMMON_CLK=y +CONFIG_EXYNOS_AUDSS_CLK_CON=y +CONFIG_SUNXI_CCU=y +# CONFIG_SUN6I_A31_CCU is not set +# CONFIG_SUN8I_A23_CCU is not set +# CONFIG_SUN8I_A33_CCU is not set +# CONFIG_SUN8I_H3_CCU is not set +CONFIG_CLK_UNIPHIER=y +CONFIG_HWSPINLOCK=y + +# +# Hardware Spinlock drivers +# +CONFIG_HWSPINLOCK_QCOM=y +CONFIG_HWSPINLOCK_RCAR=y + +# +# Clock Source drivers +# +CONFIG_CLKSRC_OF=y +CONFIG_CLKSRC_ACPI=y +CONFIG_CLKSRC_PROBE=y +CONFIG_CLKSRC_MMIO=y +CONFIG_ROCKCHIP_TIMER=y +CONFIG_ARM_ARCH_TIMER=y +CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y +CONFIG_FSL_ERRATUM_A008585=y +CONFIG_ARM_TIMER_SP804=y +# CONFIG_ATMEL_PIT is not set +CONFIG_MTK_TIMER=y +# CONFIG_SH_TIMER_CMT is not set +# CONFIG_SH_TIMER_MTU2 is not set +# CONFIG_SH_TIMER_TMU is not set +# CONFIG_EM_TIMER_STI is not set +CONFIG_CLKSRC_VERSATILE=y +CONFIG_MAILBOX=y +CONFIG_ARM_MHU=y +# CONFIG_PLATFORM_MHU is not set +# CONFIG_PL320_MBOX is not set +# CONFIG_ROCKCHIP_MBOX is not set +# CONFIG_PCC is not set +# CONFIG_ALTERA_MBOX is not set +CONFIG_HI6220_MBOX=y +# CONFIG_MAILBOX_TEST is not set +# CONFIG_XGENE_SLIMPRO_MBOX is not set +CONFIG_BCM_PDC_MBOX=y +CONFIG_IOMMU_API=y +CONFIG_IOMMU_SUPPORT=y + +# +# Generic IOMMU Pagetable Support +# +CONFIG_IOMMU_IO_PGTABLE=y +CONFIG_IOMMU_IO_PGTABLE_LPAE=y +# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set +# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set +CONFIG_IOMMU_IOVA=y +CONFIG_OF_IOMMU=y +CONFIG_IOMMU_DMA=y +# CONFIG_EXYNOS_IOMMU is not set +# CONFIG_IPMMU_VMSA is not set +CONFIG_ARM_SMMU=y +# CONFIG_ARM_SMMU_V3 is not set +# CONFIG_MTK_IOMMU is not set + +# +# Remoteproc drivers +# +# CONFIG_STE_MODEM_RPROC is not set +# CONFIG_QCOM_Q6V5_PIL is not set +# CONFIG_QCOM_WCNSS_PIL is not set + +# +# Rpmsg drivers +# +CONFIG_RPMSG=y +CONFIG_RPMSG_VIRTIO=y + +# +# SOC (System On Chip) specific Drivers +# + +# +# Broadcom SoC drivers +# +CONFIG_MTK_INFRACFG=y +# CONFIG_MTK_PMIC_WRAP is not set +CONFIG_MTK_SCPSYS=y +# CONFIG_QCOM_GSBI is not set +CONFIG_QCOM_SMEM=y +CONFIG_QCOM_SMD=y +CONFIG_QCOM_SMD_RPM=y +# CONFIG_QCOM_SMP2P is not set +# CONFIG_QCOM_SMSM is not set +# CONFIG_QCOM_WCNSS_CTRL is not set +# CONFIG_ROCKCHIP_PM_DOMAINS is not set +CONFIG_SOC_SAMSUNG=y +CONFIG_SUNXI_SRAM=y +CONFIG_ARCH_TEGRA_132_SOC=y +CONFIG_ARCH_TEGRA_210_SOC=y +# CONFIG_SOC_TI is not set +CONFIG_RCAR_THERMAL_EMS_ENABLED=y +CONFIG_RCAR_DDR_BACKUP=y +# CONFIG_PM_DEVFREQ is not set +CONFIG_EXTCON=y + +# +# Extcon Device Drivers +# +# CONFIG_EXTCON_ADC_JACK is not set +# CONFIG_EXTCON_GPIO is not set +# CONFIG_EXTCON_MAX3355 is not set +# CONFIG_EXTCON_QCOM_SPMI_MISC is not set +# CONFIG_EXTCON_RT8973A is not set +# CONFIG_EXTCON_SM5502 is not set +CONFIG_EXTCON_USB_GPIO=y +# CONFIG_MEMORY is not set +CONFIG_IIO=y +# CONFIG_IIO_BUFFER is not set +# CONFIG_IIO_CONFIGFS is not set +# CONFIG_IIO_TRIGGER is not set +# CONFIG_IIO_SW_DEVICE is not set +# CONFIG_IIO_SW_TRIGGER is not set + +# +# Accelerometers +# +# CONFIG_BMA180 is not set +# CONFIG_BMA220 is not set +# CONFIG_BMC150_ACCEL is not set +# CONFIG_DMARD06 is not set +# CONFIG_DMARD09 is not set +# CONFIG_IIO_ST_ACCEL_3AXIS is not set +# CONFIG_KXSD9 is not set +# CONFIG_KXCJK1013 is not set +# CONFIG_MC3230 is not set +# CONFIG_MMA7455_I2C is not set +# CONFIG_MMA7455_SPI is not set +# CONFIG_MMA7660 is not set +# CONFIG_MMA8452 is not set +# CONFIG_MMA9551 is not set +# CONFIG_MMA9553 is not set +# CONFIG_MXC4005 is not set +# CONFIG_MXC6255 is not set +# CONFIG_STK8312 is not set +# CONFIG_STK8BA50 is not set + +# +# Analog to digital converters +# +# CONFIG_AD7266 is not set +# CONFIG_AD7291 is not set +# CONFIG_AD7298 is not set +# CONFIG_AD7476 is not set +# CONFIG_AD7791 is not set +# CONFIG_AD7793 is not set +# CONFIG_AD7887 is not set +# CONFIG_AD7923 is not set +# CONFIG_AD799X is not set +# CONFIG_BCM_IPROC_ADC is not set +# CONFIG_BERLIN2_ADC is not set +# CONFIG_CC10001_ADC is not set +CONFIG_EXYNOS_ADC=y +# CONFIG_HI8435 is not set +# CONFIG_INA2XX_ADC is not set +# CONFIG_LTC2485 is not set +# CONFIG_MAX1027 is not set +# CONFIG_MAX1363 is not set +# CONFIG_MCP320X is not set +# CONFIG_MCP3422 is not set +# CONFIG_MEDIATEK_MT6577_AUXADC is not set +# CONFIG_NAU7802 is not set +# CONFIG_QCOM_SPMI_IADC is not set +# CONFIG_QCOM_SPMI_VADC is not set +# CONFIG_ROCKCHIP_SARADC is not set +# CONFIG_TI_ADC081C is not set +# CONFIG_TI_ADC0832 is not set +# CONFIG_TI_ADC12138 is not set +# CONFIG_TI_ADC128S052 is not set +# CONFIG_TI_ADC161S626 is not set +# CONFIG_TI_ADS1015 is not set +# CONFIG_TI_ADS8688 is not set +# CONFIG_VF610_ADC is not set + +# +# Amplifiers +# +# CONFIG_AD8366 is not set + +# +# Chemical Sensors +# +# CONFIG_ATLAS_PH_SENSOR is not set +# CONFIG_IAQCORE is not set +# CONFIG_VZ89X is not set + +# +# Hid Sensor IIO Common +# + +# +# SSP Sensor Common +# +# CONFIG_IIO_SSP_SENSORHUB is not set + +# +# Digital to analog converters +# +# CONFIG_AD5064 is not set +# CONFIG_AD5360 is not set +# CONFIG_AD5380 is not set +# CONFIG_AD5421 is not set +# CONFIG_AD5446 is not set +# CONFIG_AD5449 is not set +# CONFIG_AD5592R is not set +# CONFIG_AD5593R is not set +# CONFIG_AD5504 is not set +# CONFIG_AD5624R_SPI is not set +# CONFIG_AD5686 is not set +# CONFIG_AD5755 is not set +# CONFIG_AD5761 is not set +# CONFIG_AD5764 is not set +# CONFIG_AD5791 is not set +# CONFIG_AD7303 is not set +# CONFIG_AD8801 is not set +# CONFIG_M62332 is not set +# CONFIG_MAX517 is not set +# CONFIG_MAX5821 is not set +# CONFIG_MCP4725 is not set +# CONFIG_MCP4922 is not set +# CONFIG_VF610_DAC is not set + +# +# IIO dummy driver +# + +# +# Frequency Synthesizers DDS/PLL +# + +# +# Clock Generator/Distribution +# +# CONFIG_AD9523 is not set + +# +# Phase-Locked Loop (PLL) frequency synthesizers +# +# CONFIG_ADF4350 is not set + +# +# Digital gyroscope sensors +# +# CONFIG_ADIS16080 is not set +# CONFIG_ADIS16130 is not set +# CONFIG_ADIS16136 is not set +# CONFIG_ADIS16260 is not set +# CONFIG_ADXRS450 is not set +# CONFIG_BMG160 is not set +# CONFIG_IIO_ST_GYRO_3AXIS is not set +# CONFIG_ITG3200 is not set + +# +# Health Sensors +# + +# +# Heart Rate Monitors +# +# CONFIG_AFE4403 is not set +# CONFIG_AFE4404 is not set +# CONFIG_MAX30100 is not set + +# +# Humidity sensors +# +# CONFIG_AM2315 is not set +# CONFIG_DHT11 is not set +# CONFIG_HDC100X is not set +# CONFIG_HTU21 is not set +# CONFIG_SI7005 is not set +# CONFIG_SI7020 is not set + +# +# Inertial measurement units +# +# CONFIG_ADIS16400 is not set +# CONFIG_ADIS16480 is not set +# CONFIG_BMI160_I2C is not set +# CONFIG_BMI160_SPI is not set +# CONFIG_KMX61 is not set +# CONFIG_INV_MPU6050_I2C is not set +# CONFIG_INV_MPU6050_SPI is not set + +# +# Light sensors +# +# CONFIG_ACPI_ALS is not set +# CONFIG_ADJD_S311 is not set +# CONFIG_AL3320A is not set +# CONFIG_APDS9300 is not set +# CONFIG_APDS9960 is not set +# CONFIG_BH1750 is not set +# CONFIG_BH1780 is not set +# CONFIG_CM32181 is not set +# CONFIG_CM3232 is not set +# CONFIG_CM3323 is not set +# CONFIG_CM36651 is not set +# CONFIG_GP2AP020A00F is not set +# CONFIG_ISL29125 is not set +# CONFIG_JSA1212 is not set +# CONFIG_RPR0521 is not set +# CONFIG_LTR501 is not set +# CONFIG_MAX44000 is not set +# CONFIG_OPT3001 is not set +# CONFIG_PA12203001 is not set +# CONFIG_SI1145 is not set +# CONFIG_STK3310 is not set +# CONFIG_TCS3414 is not set +# CONFIG_TCS3472 is not set +# CONFIG_SENSORS_TSL2563 is not set +# CONFIG_TSL4531 is not set +# CONFIG_US5182D is not set +# CONFIG_VCNL4000 is not set +# CONFIG_VEML6070 is not set + +# +# Magnetometer sensors +# +# CONFIG_AK8974 is not set +# CONFIG_AK8975 is not set +# CONFIG_AK09911 is not set +# CONFIG_BMC150_MAGN_I2C is not set +# CONFIG_BMC150_MAGN_SPI is not set +# CONFIG_MAG3110 is not set +# CONFIG_MMC35240 is not set +# CONFIG_IIO_ST_MAGN_3AXIS is not set +# CONFIG_SENSORS_HMC5843_I2C is not set +# CONFIG_SENSORS_HMC5843_SPI is not set + +# +# Inclinometer sensors +# + +# +# Digital potentiometers +# +# CONFIG_DS1803 is not set +# CONFIG_MAX5487 is not set +# CONFIG_MCP4131 is not set +# CONFIG_MCP4531 is not set +# CONFIG_TPL0102 is not set + +# +# Pressure sensors +# +# CONFIG_BMP280 is not set +# CONFIG_HP03 is not set +# CONFIG_MPL115_I2C is not set +# CONFIG_MPL115_SPI is not set +# CONFIG_MPL3115 is not set +# CONFIG_MS5611 is not set +# CONFIG_MS5637 is not set +# CONFIG_IIO_ST_PRESS is not set +# CONFIG_T5403 is not set +# CONFIG_HP206C is not set +# CONFIG_ZPA2326 is not set + +# +# Lightning sensors +# +# CONFIG_AS3935 is not set + +# +# Proximity sensors +# +# CONFIG_LIDAR_LITE_V2 is not set +# CONFIG_SX9500 is not set + +# +# Temperature sensors +# +# CONFIG_MAXIM_THERMOCOUPLE is not set +# CONFIG_MLX90614 is not set +# CONFIG_TMP006 is not set +# CONFIG_TSYS01 is not set +# CONFIG_TSYS02D is not set +# CONFIG_NTB is not set +# CONFIG_VME_BUS is not set +CONFIG_PWM=y +CONFIG_PWM_SYSFS=y +# CONFIG_PWM_BCM_IPROC is not set +# CONFIG_PWM_BERLIN is not set +# CONFIG_PWM_CROS_EC is not set +# CONFIG_PWM_FSL_FTM is not set +# CONFIG_PWM_MESON is not set +# CONFIG_PWM_MTK_DISP is not set +# CONFIG_PWM_PCA9685 is not set +CONFIG_PWM_RCAR=y +# CONFIG_PWM_RENESAS_TPU is not set +# CONFIG_PWM_ROCKCHIP is not set +CONFIG_PWM_SAMSUNG=y +# CONFIG_PWM_SUN4I is not set +CONFIG_PWM_TEGRA=m +CONFIG_IRQCHIP=y +CONFIG_ARM_GIC=y +CONFIG_ARM_GIC_MAX_NR=1 +CONFIG_ARM_GIC_V2M=y +CONFIG_ARM_GIC_V3=y +CONFIG_ARM_GIC_V3_ITS=y +CONFIG_ALPINE_MSI=y +CONFIG_DW_APB_ICTL=y +CONFIG_HISILICON_IRQ_MBIGEN=y +CONFIG_RENESAS_IRQC=y +CONFIG_MVEBU_ODMI=y +CONFIG_MVEBU_PIC=y +CONFIG_LS_SCFG_MSI=y +CONFIG_PARTITION_PERCPU=y +# CONFIG_IPACK_BUS is not set +CONFIG_ARCH_HAS_RESET_CONTROLLER=y +CONFIG_RESET_CONTROLLER=y +# CONFIG_RESET_ATH79 is not set +CONFIG_RESET_BERLIN=y +# CONFIG_RESET_LPC18XX is not set +CONFIG_RESET_MESON=y +# CONFIG_RESET_PISTACHIO is not set +# CONFIG_RESET_SOCFPGA is not set +# CONFIG_RESET_STM32 is not set +CONFIG_RESET_SUNXI=y +# CONFIG_TI_SYSCON_RESET is not set +CONFIG_RESET_UNIPHIER=y +# CONFIG_RESET_ZYNQ is not set +CONFIG_COMMON_RESET_HI6220=y +# CONFIG_FMC is not set + +# +# PHY Subsystem +# +CONFIG_GENERIC_PHY=y +# CONFIG_PHY_BCM_NS_USB2 is not set +# CONFIG_PHY_BCM_NS_USB3 is not set +# CONFIG_PHY_BERLIN_USB is not set +# CONFIG_PHY_BERLIN_SATA is not set +CONFIG_PHY_EXYNOS_MIPI_VIDEO=y +# CONFIG_PHY_PXA_28NM_HSIC is not set +# CONFIG_PHY_PXA_28NM_USB2 is not set +# CONFIG_PHY_RCAR_GEN2 is not set +CONFIG_PHY_RCAR_GEN3_USB2=y +CONFIG_PHY_EXYNOS_DP_VIDEO=y +# CONFIG_BCM_KONA_USB2_PHY is not set +# CONFIG_PHY_MT65XX_USB3 is not set +CONFIG_PHY_HI6220_USB=y +# CONFIG_PHY_SUN4I_USB is not set +# CONFIG_PHY_SUN9I_USB is not set +CONFIG_PHY_SAMSUNG_USB2=y +# CONFIG_PHY_EXYNOS4210_USB2 is not set +# CONFIG_PHY_EXYNOS4X12_USB2 is not set +# CONFIG_PHY_EXYNOS5250_USB2 is not set +CONFIG_PHY_EXYNOS5_USBDRD=y +# CONFIG_PHY_QCOM_APQ8064_SATA is not set +# CONFIG_PHY_QCOM_IPQ806X_SATA is not set +# CONFIG_PHY_ROCKCHIP_USB is not set +# CONFIG_PHY_ROCKCHIP_INNO_USB2 is not set +# CONFIG_PHY_ROCKCHIP_EMMC is not set +# CONFIG_PHY_ROCKCHIP_DP is not set +# CONFIG_PHY_ROCKCHIP_PCIE is not set +# CONFIG_PHY_ROCKCHIP_TYPEC is not set +CONFIG_PHY_XGENE=y +# CONFIG_PHY_QCOM_UFS is not set +CONFIG_PHY_BRCM_SATA=y +CONFIG_PHY_TEGRA_XUSB=y +CONFIG_PHY_NS2_PCIE=y +# CONFIG_POWERCAP is not set +# CONFIG_MCB is not set + +# +# Performance monitor support +# +CONFIG_ARM_PMU=y +# CONFIG_XGENE_PMU is not set +CONFIG_RAS=y +# CONFIG_THUNDERBOLT is not set + +# +# Android +# +# CONFIG_ANDROID is not set +# CONFIG_LIBNVDIMM is not set +# CONFIG_DEV_DAX is not set +# CONFIG_NVMEM is not set +# CONFIG_STM is not set +# CONFIG_INTEL_TH is not set + +# +# FPGA Configuration Support +# +# CONFIG_FPGA is not set + +# +# Firmware Drivers +# +CONFIG_ARM_PSCI_FW=y +CONFIG_ARM_SCPI_PROTOCOL=y +CONFIG_ARM_SCPI_POWER_DOMAIN=y +# CONFIG_FIRMWARE_MEMMAP is not set +CONFIG_DMIID=y +# CONFIG_DMI_SYSFS is not set +# CONFIG_FW_CFG_SYSFS is not set +CONFIG_QCOM_SCM=y +CONFIG_QCOM_SCM_64=y +CONFIG_HAVE_ARM_SMCCC=y + +# +# EFI (Extensible Firmware Interface) Support +# +# CONFIG_EFI_VARS is not set +CONFIG_EFI_ESRT=y +CONFIG_EFI_PARAMS_FROM_FDT=y +CONFIG_EFI_RUNTIME_WRAPPERS=y +CONFIG_EFI_ARMSTUB=y +# CONFIG_EFI_CAPSULE_LOADER is not set +# CONFIG_EFI_TEST is not set +CONFIG_MESON_SM=y +CONFIG_ACPI=y +CONFIG_ACPI_GENERIC_GSI=y +CONFIG_ACPI_CCA_REQUIRED=y +# CONFIG_ACPI_DEBUGGER is not set +CONFIG_ACPI_SPCR_TABLE=y +# CONFIG_ACPI_EC_DEBUGFS is not set +CONFIG_ACPI_BUTTON=y +CONFIG_ACPI_FAN=y +# CONFIG_ACPI_DOCK is not set +CONFIG_ACPI_PROCESSOR_IDLE=y +CONFIG_ACPI_MCFG=y +CONFIG_ACPI_PROCESSOR=y +CONFIG_ACPI_HOTPLUG_CPU=y +CONFIG_ACPI_THERMAL=y +# CONFIG_ACPI_CUSTOM_DSDT is not set +CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y +CONFIG_ACPI_TABLE_UPGRADE=y +# CONFIG_ACPI_DEBUG is not set +# CONFIG_ACPI_PCI_SLOT is not set +CONFIG_ACPI_CONTAINER=y +# CONFIG_ACPI_HED is not set +# CONFIG_ACPI_CUSTOM_METHOD is not set +CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y +# CONFIG_PMIC_OPREGION is not set +# CONFIG_ACPI_CONFIGFS is not set +CONFIG_ACPI_IORT=y + +# +# File systems +# +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y +# CONFIG_EXT4_FS_SECURITY is not set +# CONFIG_EXT4_ENCRYPTION is not set +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_BTRFS_FS=m +CONFIG_BTRFS_FS_POSIX_ACL=y +# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set +# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set +# CONFIG_BTRFS_DEBUG is not set +# CONFIG_BTRFS_ASSERT is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_F2FS_FS is not set +# CONFIG_FS_DAX is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_EXPORTFS=y +# CONFIG_EXPORTFS_BLOCK_OPS is not set +CONFIG_FILE_LOCKING=y +CONFIG_MANDATORY_FILE_LOCKING=y +# CONFIG_FS_ENCRYPTION is not set +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_FANOTIFY=y +CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QUOTA_DEBUG is not set +# CONFIG_QFMT_V1 is not set +# CONFIG_QFMT_V2 is not set +CONFIG_QUOTACTL=y +CONFIG_AUTOFS4_FS=y +CONFIG_FUSE_FS=m +CONFIG_CUSE=m +CONFIG_OVERLAY_FS=m + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_FAT_DEFAULT_UTF8 is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_PROC_CHILDREN is not set +CONFIG_KERNFS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_TMPFS_XATTR is not set +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_ARCH_HAS_GIGANTIC_PAGE=y +CONFIG_CONFIGFS_FS=y +CONFIG_EFIVAR_FS=y +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ORANGEFS_FS is not set +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_LOGFS is not set +# CONFIG_CRAMFS is not set +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_FILE_CACHE=y +# CONFIG_SQUASHFS_FILE_DIRECT is not set +CONFIG_SQUASHFS_DECOMP_SINGLE=y +# CONFIG_SQUASHFS_DECOMP_MULTI is not set +# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set +# CONFIG_SQUASHFS_XATTR is not set +CONFIG_SQUASHFS_ZLIB=y +# CONFIG_SQUASHFS_LZ4 is not set +# CONFIG_SQUASHFS_LZO is not set +# CONFIG_SQUASHFS_XZ is not set +# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_QNX6FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_PSTORE is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V2=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_SWAP is not set +CONFIG_NFS_V4_1=y +CONFIG_NFS_V4_2=y +CONFIG_PNFS_FILE_LAYOUT=y +CONFIG_PNFS_FLEXFILE_LAYOUT=m +CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" +# CONFIG_NFS_V4_1_MIGRATION is not set +CONFIG_NFS_V4_SECURITY_LABEL=y +CONFIG_ROOT_NFS=y +# CONFIG_NFS_USE_LEGACY_DNS is not set +CONFIG_NFS_USE_KERNEL_DNS=y +# CONFIG_NFSD is not set +CONFIG_GRACE_PERIOD=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_SUNRPC_BACKCHANNEL=y +# CONFIG_SUNRPC_DEBUG is not set +# CONFIG_CEPH_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +CONFIG_9P_FS=y +# CONFIG_9P_FS_POSIX_ACL is not set +# CONFIG_9P_FS_SECURITY is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_MAC_ROMAN is not set +# CONFIG_NLS_MAC_CELTIC is not set +# CONFIG_NLS_MAC_CENTEURO is not set +# CONFIG_NLS_MAC_CROATIAN is not set +# CONFIG_NLS_MAC_CYRILLIC is not set +# CONFIG_NLS_MAC_GAELIC is not set +# CONFIG_NLS_MAC_GREEK is not set +# CONFIG_NLS_MAC_ICELAND is not set +# CONFIG_NLS_MAC_INUIT is not set +# CONFIG_NLS_MAC_ROMANIAN is not set +# CONFIG_NLS_MAC_TURKISH is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set +CONFIG_HAVE_KVM_IRQCHIP=y +CONFIG_HAVE_KVM_IRQFD=y +CONFIG_HAVE_KVM_IRQ_ROUTING=y +CONFIG_HAVE_KVM_EVENTFD=y +CONFIG_KVM_MMIO=y +CONFIG_HAVE_KVM_MSI=y +CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y +CONFIG_KVM_VFIO=y +CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL=y +CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y +CONFIG_KVM_COMPAT=y +CONFIG_VIRTUALIZATION=y +CONFIG_KVM_ARM_VGIC_V3_ITS=y +CONFIG_KVM=y +CONFIG_KVM_ARM_HOST=y +CONFIG_KVM_ARM_PMU=y +# CONFIG_VHOST_NET is not set +# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set + +# +# Kernel hacking +# + +# +# printk and dmesg options +# +CONFIG_PRINTK_TIME=y +CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DYNAMIC_DEBUG is not set + +# +# Compile-time checks and compiler options +# +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_INFO_REDUCED is not set +# CONFIG_DEBUG_INFO_SPLIT is not set +# CONFIG_DEBUG_INFO_DWARF4 is not set +# CONFIG_GDB_SCRIPTS is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=2048 +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_READABLE_ASM is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_PAGE_OWNER is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_SECTION_MISMATCH is not set +CONFIG_SECTION_MISMATCH_WARN_ONLY=y +CONFIG_ARCH_WANT_FRAME_POINTERS=y +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 +CONFIG_DEBUG_KERNEL=y + +# +# Memory Debugging +# +# CONFIG_PAGE_EXTENSION is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PAGE_POISONING is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +CONFIG_HAVE_DEBUG_KMEMLEAK=y +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_VM is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_PER_CPU_MAPS is not set +CONFIG_HAVE_ARCH_KASAN=y +# CONFIG_KASAN is not set +CONFIG_ARCH_HAS_KCOV=y +# CONFIG_KCOV is not set +# CONFIG_DEBUG_SHIRQ is not set + +# +# Debug Lockups and Hangs +# +CONFIG_LOCKUP_DETECTOR=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_WQ_WATCHDOG is not set +# CONFIG_PANIC_ON_OOPS is not set +CONFIG_PANIC_ON_OOPS_VALUE=0 +CONFIG_PANIC_TIMEOUT=0 +# CONFIG_SCHED_DEBUG is not set +CONFIG_SCHED_INFO=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_SCHED_STACK_END_CHECK is not set +# CONFIG_DEBUG_TIMEKEEPING is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_PREEMPT is not set + +# +# Lock Debugging (spinlocks, mutexes, etc...) +# +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_ATOMIC_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_LOCK_TORTURE_TEST is not set +# CONFIG_STACKTRACE is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_HAVE_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_PI_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set + +# +# RCU Debugging +# +# CONFIG_PROVE_RCU is not set +# CONFIG_SPARSE_RCU_POINTER is not set +# CONFIG_TORTURE_TEST is not set +# CONFIG_RCU_PERF_TEST is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_RCU_CPU_STALL_TIMEOUT=21 +# CONFIG_RCU_TRACE is not set +# CONFIG_RCU_EQS_DEBUG is not set +# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set +# CONFIG_NOTIFIER_ERROR_INJECTION is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set + +# +# Runtime Testing +# +# CONFIG_LKDTM is not set +# CONFIG_TEST_LIST_SORT is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_RBTREE_TEST is not set +# CONFIG_INTERVAL_TREE_TEST is not set +# CONFIG_PERCPU_TEST is not set +# CONFIG_ATOMIC64_SELFTEST is not set +# CONFIG_TEST_HEXDUMP is not set +# CONFIG_TEST_STRING_HELPERS is not set +# CONFIG_TEST_KSTRTOX is not set +# CONFIG_TEST_PRINTF is not set +# CONFIG_TEST_BITMAP is not set +# CONFIG_TEST_UUID is not set +# CONFIG_TEST_RHASHTABLE is not set +# CONFIG_TEST_HASH is not set +# CONFIG_DMA_API_DEBUG is not set +# CONFIG_TEST_LKM is not set +# CONFIG_TEST_USER_COPY is not set +# CONFIG_TEST_BPF is not set +# CONFIG_TEST_FIRMWARE is not set +# CONFIG_TEST_UDELAY is not set +CONFIG_MEMTEST=y +# CONFIG_TEST_STATIC_KEYS is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y +# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set +# CONFIG_UBSAN is not set +CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y +# CONFIG_STRICT_DEVMEM is not set +# CONFIG_ARM64_PTDUMP is not set +# CONFIG_PID_IN_CONTEXTIDR is not set +# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set +CONFIG_DEBUG_SET_MODULE_RONX=y +# CONFIG_DEBUG_ALIGN_RODATA is not set +# CONFIG_CORESIGHT is not set + +# +# Security options +# +CONFIG_KEYS=y +# CONFIG_PERSISTENT_KEYRINGS is not set +# CONFIG_BIG_KEYS is not set +# CONFIG_ENCRYPTED_KEYS is not set +# CONFIG_KEY_DH_OPERATIONS is not set +# CONFIG_SECURITY_DMESG_RESTRICT is not set +CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set +CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y +CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y +# CONFIG_HARDENED_USERCOPY is not set +# CONFIG_SECURITY_SMACK is not set +# CONFIG_SECURITY_TOMOYO is not set +# CONFIG_SECURITY_APPARMOR is not set +# CONFIG_SECURITY_LOADPIN is not set +# CONFIG_SECURITY_YAMA is not set +CONFIG_INTEGRITY=y +# CONFIG_INTEGRITY_SIGNATURE is not set +CONFIG_INTEGRITY_AUDIT=y +# CONFIG_IMA is not set +# CONFIG_EVM is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_XOR_BLOCKS=m +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_RNG_DEFAULT=y +CONFIG_CRYPTO_AKCIPHER2=y +CONFIG_CRYPTO_KPP2=y +# CONFIG_CRYPTO_RSA is not set +# CONFIG_CRYPTO_DH is not set +# CONFIG_CRYPTO_ECDH is not set +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_USER is not set +CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=y +CONFIG_CRYPTO_NULL2=y +# CONFIG_CRYPTO_PCRYPT is not set +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_CRYPTD=y +# CONFIG_CRYPTO_MCRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set +CONFIG_CRYPTO_ABLK_HELPER=y + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +# CONFIG_CRYPTO_CHACHA20POLY1305 is not set +CONFIG_CRYPTO_SEQIV=m +CONFIG_CRYPTO_ECHAINIV=y + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +CONFIG_CRYPTO_CTR=m +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_KEYWRAP is not set + +# +# Hash modes +# +CONFIG_CRYPTO_CMAC=m +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_CRC32 is not set +CONFIG_CRYPTO_CRCT10DIF=y +CONFIG_CRYPTO_GHASH=m +# CONFIG_CRYPTO_POLY1305 is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +CONFIG_CRYPTO_SHA256=y +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_SHA3 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_CHACHA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +# CONFIG_CRYPTO_842 is not set +# CONFIG_CRYPTO_LZ4 is not set +# CONFIG_CRYPTO_LZ4HC is not set + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=y +CONFIG_CRYPTO_DRBG_MENU=y +CONFIG_CRYPTO_DRBG_HMAC=y +# CONFIG_CRYPTO_DRBG_HASH is not set +# CONFIG_CRYPTO_DRBG_CTR is not set +CONFIG_CRYPTO_DRBG=y +CONFIG_CRYPTO_JITTERENTROPY=y +# CONFIG_CRYPTO_USER_API_HASH is not set +# CONFIG_CRYPTO_USER_API_SKCIPHER is not set +# CONFIG_CRYPTO_USER_API_RNG is not set +# CONFIG_CRYPTO_USER_API_AEAD is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_MARVELL_CESA is not set +# CONFIG_CRYPTO_DEV_FSL_CAAM is not set +# CONFIG_CRYPTO_DEV_S5P is not set +# CONFIG_CRYPTO_DEV_CCP is not set +# CONFIG_CRYPTO_DEV_QCE is not set +# CONFIG_CRYPTO_DEV_ROCKCHIP is not set +# CONFIG_ASYMMETRIC_KEY_TYPE is not set + +# +# Certificates for signature checking +# +CONFIG_ARM64_CRYPTO=y +CONFIG_CRYPTO_SHA1_ARM64_CE=y +CONFIG_CRYPTO_SHA2_ARM64_CE=y +CONFIG_CRYPTO_GHASH_ARM64_CE=y +CONFIG_CRYPTO_AES_ARM64_CE=y +CONFIG_CRYPTO_AES_ARM64_CE_CCM=y +CONFIG_CRYPTO_AES_ARM64_CE_BLK=y +# CONFIG_CRYPTO_AES_ARM64_NEON_BLK is not set +CONFIG_CRYPTO_CRC32_ARM64=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_RAID6_PQ=m +CONFIG_BITREVERSE=y +CONFIG_HAVE_ARCH_BITREVERSE=y +CONFIG_RATIONAL=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GENERIC_NET_UTILS=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_IO=y +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y +# CONFIG_CRC_CCITT is not set +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +# CONFIG_CRC32_SELFTEST is not set +CONFIG_CRC32_SLICEBY8=y +# CONFIG_CRC32_SLICEBY4 is not set +# CONFIG_CRC32_SARWATE is not set +# CONFIG_CRC32_BIT is not set +CONFIG_CRC7=y +# CONFIG_LIBCRC32C is not set +# CONFIG_CRC8 is not set +CONFIG_AUDIT_GENERIC=y +CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y +CONFIG_AUDIT_COMPAT_GENERIC=y +# CONFIG_RANDOM32_SELFTEST is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_LZ4_DECOMPRESS=y +CONFIG_XZ_DEC=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_BCJ=y +# CONFIG_XZ_DEC_TEST is not set +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_XZ=y +CONFIG_DECOMPRESS_LZO=y +CONFIG_DECOMPRESS_LZ4=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_RADIX_TREE_MULTIORDER=y +CONFIG_ASSOCIATIVE_ARRAY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +CONFIG_HAS_DMA=y +CONFIG_CPU_RMAP=y +CONFIG_DQL=y +CONFIG_GLOB=y +# CONFIG_GLOB_SELFTEST is not set +CONFIG_NLATTR=y +# CONFIG_CORDIC is not set +# CONFIG_DDR is not set +# CONFIG_IRQ_POLL is not set +CONFIG_LIBFDT=y +CONFIG_OID_REGISTRY=y +CONFIG_UCS2_STRING=y +CONFIG_FONT_SUPPORT=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_SG_SPLIT is not set +CONFIG_SG_POOL=y +CONFIG_ARCH_HAS_SG_CHAIN=y +CONFIG_SBITMAP=y diff --git a/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/salvator-x/touch.cfg b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/salvator-x/touch.cfg new file mode 100644 index 0000000..327c753 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/salvator-x/touch.cfg @@ -0,0 +1 @@ +CONFIG_HID_MULTITOUCH=y diff --git a/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/salvator-x/usb-video-class.cfg b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/salvator-x/usb-video-class.cfg new file mode 100644 index 0000000..7446787 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/salvator-x/usb-video-class.cfg @@ -0,0 +1,68 @@ +CONFIG_MEDIA_USB_SUPPORT=y + +# +# Webcam devices +# +CONFIG_USB_VIDEO_CLASS=y +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=m +# CONFIG_USB_M5602 is not set +# CONFIG_USB_STV06XX is not set +# CONFIG_USB_GL860 is not set +# CONFIG_USB_GSPCA_BENQ is not set +# CONFIG_USB_GSPCA_CONEX is not set +# CONFIG_USB_GSPCA_CPIA1 is not set +# CONFIG_USB_GSPCA_DTCS033 is not set +# CONFIG_USB_GSPCA_ETOMS is not set +# CONFIG_USB_GSPCA_FINEPIX is not set +# CONFIG_USB_GSPCA_JEILINJ is not set +# CONFIG_USB_GSPCA_JL2005BCD is not set +# CONFIG_USB_GSPCA_KINECT is not set +# CONFIG_USB_GSPCA_KONICA is not set +# CONFIG_USB_GSPCA_MARS is not set +# CONFIG_USB_GSPCA_MR97310A is not set +# CONFIG_USB_GSPCA_NW80X is not set +# CONFIG_USB_GSPCA_OV519 is not set +# CONFIG_USB_GSPCA_OV534 is not set +# CONFIG_USB_GSPCA_OV534_9 is not set +# CONFIG_USB_GSPCA_PAC207 is not set +# CONFIG_USB_GSPCA_PAC7302 is not set +# CONFIG_USB_GSPCA_PAC7311 is not set +# CONFIG_USB_GSPCA_SE401 is not set +# CONFIG_USB_GSPCA_SN9C2028 is not set +# CONFIG_USB_GSPCA_SN9C20X is not set +# CONFIG_USB_GSPCA_SONIXB is not set +# CONFIG_USB_GSPCA_SONIXJ is not set +# CONFIG_USB_GSPCA_SPCA500 is not set +# CONFIG_USB_GSPCA_SPCA501 is not set +# CONFIG_USB_GSPCA_SPCA505 is not set +# CONFIG_USB_GSPCA_SPCA506 is not set +# CONFIG_USB_GSPCA_SPCA508 is not set +# CONFIG_USB_GSPCA_SPCA561 is not set +# CONFIG_USB_GSPCA_SPCA1528 is not set +# CONFIG_USB_GSPCA_SQ905 is not set +# CONFIG_USB_GSPCA_SQ905C is not set +# CONFIG_USB_GSPCA_SQ930X is not set +# CONFIG_USB_GSPCA_STK014 is not set +# CONFIG_USB_GSPCA_STK1135 is not set +# CONFIG_USB_GSPCA_STV0680 is not set +# CONFIG_USB_GSPCA_SUNPLUS is not set +# CONFIG_USB_GSPCA_T613 is not set +# CONFIG_USB_GSPCA_TOPRO is not set +# CONFIG_USB_GSPCA_TOUPTEK is not set +# CONFIG_USB_GSPCA_TV8532 is not set +# CONFIG_USB_GSPCA_VC032X is not set +# CONFIG_USB_GSPCA_VICAM is not set +# CONFIG_USB_GSPCA_XIRLINK_CIT is not set +# CONFIG_USB_GSPCA_ZC3XX is not set +# CONFIG_USB_PWC is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_USB_ZR364XX is not set +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set +# CONFIG_VIDEO_USBTV is not set + +# +# Webcam, TV (analog/digital) USB devices +# +# CONFIG_VIDEO_EM28XX is not set diff --git a/meta-rcar-gen3/recipes-kernel/linux/linux-renesas_4.9.bb b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas_4.9.bb new file mode 100644 index 0000000..c6d944d --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas_4.9.bb @@ -0,0 +1,23 @@ +DESCRIPTION = "Linux kernel for the R-Car Generation 3 based board" + +require include/avb-control.inc +require recipes-kernel/linux/linux-yocto.inc + +FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}/${MACHINE}:" +COMPATIBLE_MACHINE = "salvator-x|h3ulcb|m3ulcb" + +RENESAS_BSP_URL = "git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas-bsp.git" +BRANCH = "v4.9/rcar-3.5.1" +SRCREV = "13e7680774d9103bb2685635238bcf577a52ff96" + +SRC_URI = "${RENESAS_BSP_URL};protocol=git;nocheckout=1;branch=${BRANCH}" + +LINUX_VERSION ?= "4.9.0" +PV = "${LINUX_VERSION}+git${SRCPV}" +PR = "r1" + +SRC_URI_append = " \ + file://defconfig \ + file://touch.cfg \ + ${@base_conditional("USE_AVB", "1", " file://usb-video-class.cfg", "", d)} \ +" diff --git a/meta-rcar-gen3/recipes-kernel/optee-linuxdriver/optee-linuxdriver_git.bb b/meta-rcar-gen3/recipes-kernel/optee-linuxdriver/optee-linuxdriver_git.bb new file mode 100644 index 0000000..a8378d6 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/optee-linuxdriver/optee-linuxdriver_git.bb @@ -0,0 +1,75 @@ +DESCRIPTION = "OP-TEE Linux Driver" +LICENSE = "GPLv2" +LIC_FILES_CHKSUM = " \ + file://LICENSE;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ +" +inherit module + +PN = "optee-linuxdriver" +PR = "r0" +BRANCH = "rcar_gen3" +SRC_URI = " \ + git://github.com/renesas-rcar/optee_linuxdriver.git;branch=${BRANCH} \ +" +SRCREV = "602d533175ce4ac3383f827c3157b1a6a78fe296" + +PV = "1.0.0+renesas+git${SRCPV}" + +PACKAGE_ARCH = "${MACHINE_ARCH}" + +S = "${WORKDIR}/git" + +LDFLAGS[unexport] = "1" + +do_configure[noexec] = "1" +# We need to be staged before do_complie. This recipe does not execute do_configure. +do_complile[depends] += "virtual/kernel:do_shared_workdir" + +do_compile() { + # Build kernel module + cd ${S}/ + make -C ${KBUILD_OUTPUT} M=${S} modules +} + +do_install() { + # Create shared directories + install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/ + install -d ${STAGING_KERNEL_DIR}/include + install -d ${STAGING_KERNEL_DIR}/include/arm_common + install -d ${STAGING_KERNEL_DIR}/include/linux + + # Install kernel module + install -m 0644 ${S}/core/optee.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/ + install -m 0644 ${S}/armtz/optee_armtz.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/ + + + # Install shared library to STAGING_KERNEL_DIR for reference from other modules + # This file installed in SDK by kernel-devsrc pkg. + install -m 0644 ${S}/Module.symvers ${STAGING_KERNEL_DIR}/include/optee.symvers + + # Install shared header files to STAGING_KERNEL_DIR + # This file installed in SDK by kernel-devsrc pkg. + install -m 0644 ${S}/include/arm_common/optee_msg.h ${STAGING_KERNEL_DIR}/include/arm_common/ + install -m 0644 ${S}/include/arm_common/optee_smc.h ${STAGING_KERNEL_DIR}/include/arm_common/ + install -m 0644 ${S}/include/linux/tee_client_api.h ${STAGING_KERNEL_DIR}/include/linux/ + install -m 0644 ${S}/include/linux/tee_core.h ${STAGING_KERNEL_DIR}/include/linux/ + install -m 0644 ${S}/include/linux/tee_ioc.h ${STAGING_KERNEL_DIR}/include/linux/ + install -m 0644 ${S}/include/linux/tee_kernel_api.h ${STAGING_KERNEL_DIR}/include/linux/ +} + +PACKAGES = "\ + ${PN} \ + ${PN}-armtz \ +" + +FILES_${PN} = " \ + /lib/modules/${KERNEL_VERSION}/extra/optee.ko \ +" + +FILES_${PN}-armtz = " \ + /lib/modules/${KERNEL_VERSION}/extra/optee_armtz.ko \ +" + +RPROVIDES_${PN} += "optee-linuxdriver" +RPROVIDES_${PN} += "kernel-module-optee" +RPROVIDES_${PN} += "kernel-module-optee-armtz" diff --git a/meta-rcar-gen3/recipes-multimedia/adsp-module/adsp-fw-module.bb b/meta-rcar-gen3/recipes-multimedia/adsp-module/adsp-fw-module.bb new file mode 100644 index 0000000..c57a47a --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/adsp-module/adsp-fw-module.bb @@ -0,0 +1,29 @@ +DESCRIPTION = "ADSP Framework for Linux" +LICENSE = "CLOSED" + +require include/adsp-control.inc + +SRC_URI = "${@base_conditional('USE_ADSP', '1', 'file://RCG3AHFWN0101ZDP.tar.gz', '', d )}" + +do_configure[noexec] = "1" +do_compile[noexec] = "1" + +PACKAGE_ARCH = "${MACHINE_ARCH}" + +S = "${WORKDIR}/RCG3AHFWN0101ZDP" + +do_install() { + # create the firmware dir + install -d ${D}/lib/firmware + + # install the firmware bin + install -m 0644 ${S}/lib/firmware/xf-rcar.fw ${D}/lib/firmware +} + +PACKAGES = " \ + ${PN} \ +" + +FILES_${PN} = " \ + /lib/firmware \ +" diff --git a/meta-rcar-gen3/recipes-multimedia/adsp-module/adsp-if-module.bb b/meta-rcar-gen3/recipes-multimedia/adsp-module/adsp-if-module.bb new file mode 100644 index 0000000..7128f7d --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/adsp-module/adsp-if-module.bb @@ -0,0 +1,58 @@ +DESCRIPTION = "ADSP Interface for Linux" +LICENSE = "CLOSED" + +require include/adsp-control.inc + +DEPENDS += "kernel-module-xtensa-hifi" + +SRC_URI = "${@base_conditional('USE_ADSP', '1', 'file://RCG3AHIFL4001ZDP.tar.gz', '', d )}" + +S = "${WORKDIR}/RCG3AHIFL4001ZDP" + +PACKAGE_ARCH = "${MACHINE_ARCH}" + +# Don't need to do_configure +do_configure[noexec] = "1" + +# Don't use EXTRA_OEMAKE default value to avoid default CFLAGS, LDFLAGS +# of poky override the CFLAGS, LDFLAGS inside RCG3AHIFL4001ZDP/Makefile +EXTRA_OEMAKE = "INCSHARED=${STAGING_INCDIR}" + +do_compile() { + cd ${S} + oe_runmake +} + +do_install() { + # Create destination directory + install -d ${D}/${libdir} + install -d ${D}/${includedir} + install -d ${D}/${includedir}/sys/fio + install -d ${D}/${includedir}/os/linux + + # Copy library + install -m 0755 ${S}/libRCG3AHIFL4001ZDP.so.1.0 ${D}/${libdir} + + # Copy shared header files + install -m 0644 ${S}/include/*.h ${D}/${includedir} + install -m 0644 ${S}/include/sys/fio/*.h ${D}/${includedir}/sys/fio/ + install -m 0644 ${S}/include/os/linux/*.h ${D}/${includedir}/os/linux/ + + # Create the symbolic link + cd ${D}/${libdir} + ln -s libRCG3AHIFL4001ZDP.so.1.0 libRCG3AHIFL4001ZDP.so.1 + ln -s libRCG3AHIFL4001ZDP.so.1 libRCG3AHIFL4001ZDP.so +} + +PACKAGES = " \ + ${PN} \ + ${PN}-dev \ + ${PN}-dbg \ +" + +INSANE_SKIP_${PN} += "dev-so" + +FILES_${PN} += " \ + ${libdir}/*.so* \ + ${includedir} \ +" diff --git a/meta-rcar-gen3/recipes-multimedia/avb-applications/avb-applications.inc b/meta-rcar-gen3/recipes-multimedia/avb-applications/avb-applications.inc new file mode 100644 index 0000000..c5ec56c --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/avb-applications/avb-applications.inc @@ -0,0 +1,9 @@ +require include/avb-control.inc +require include/rcar-gen3-modules-common.inc + +inherit distro_features_check + +REQUIRED_DISTRO_FEATURES = "avb" + +SRC_URI = "git://github.com/renesas-rcar/avb-applications.git;branch=rcar-gen3" +SRCREV = "65ed4abc3d403b61405bde89a755da37390052c9" diff --git a/meta-rcar-gen3/recipes-multimedia/avb-applications/avb-demoapps.bb b/meta-rcar-gen3/recipes-multimedia/avb-applications/avb-demoapps.bb new file mode 100644 index 0000000..ca9fd9c --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/avb-applications/avb-demoapps.bb @@ -0,0 +1,119 @@ +DESCRIPTION = "Renesas Ethernet AVB demo applications" + +require avb-applications.inc + +LICENSE = "MIT & BSD" +LIC_FILES_CHKSUM = " \ + file://COPYING.MIT;md5=96659f2a7571bfa27483882a653c3bb9 \ + file://lib/msrp/LICENSE.BSD;md5=60ba0ea0afdcbf8d26ce31ce1503aba3 \ + file://lib/avdecc/jdksavdecc-c/COPYRIGHT;md5=6592ded5140540a936b8d98ed1b6a577 \ + file://avblauncher/inih/LICENSE.txt;md5=a7a95d2af90376e85a05318794e6f202 \ +" + +DEPENDS = "kernel-module-avb-streaming libyaml" + +S = "${WORKDIR}/git/avb-demoapps" + +includedir = "/usr/local/include" + +# submodule is extracted before do_populate_lic +addtask do_init_submodule after do_unpack before do_patch + +do_init_submodule() { + cd ${S} + git submodule init + git submodule update +} + +EXTRA_OEMAKE = "'CC=${CC}' 'AR=${AR}'" + +do_install_append() { + oe_runmake install INSTALL_DIR=${D}/${bindir} + + # Create intall directories + install -d ${D}/${sysconfdir}/linuxptp + install -d ${D}/${sysconfdir}/daemon_cl + install -d ${D}/${sysconfdir}/avblauncher + + # Install + install -m 644 ${S}/etc/linuxptp/avb-demoapps.cfg ${D}/${sysconfdir}/linuxptp + install -m 644 ${S}/etc/daemon_cl/gptp_cfg_100mb.ini ${D}/${sysconfdir}/daemon_cl + install -m 644 ${S}/etc/daemon_cl/gptp_cfg.ini ${D}/${sysconfdir}/daemon_cl + install -m 755 ${S}/etc/avblauncher/mse_aaf_pcm.sh ${D}/${sysconfdir}/avblauncher + install -m 644 ${S}/etc/avblauncher/mse_aaf_pcm_listener.ini ${D}/${sysconfdir}/avblauncher + install -m 644 ${S}/etc/avblauncher/mse_aaf_pcm_talker.ini ${D}/${sysconfdir}/avblauncher + install -m 755 ${S}/etc/avblauncher/mse_cvf_h264.sh ${D}/${sysconfdir}/avblauncher + install -m 755 ${S}/etc/avblauncher/mse_cvf_h264_d13.sh ${D}/${sysconfdir}/avblauncher + install -m 644 ${S}/etc/avblauncher/mse_cvf_h264_d13_listener.ini ${D}/${sysconfdir}/avblauncher + install -m 644 ${S}/etc/avblauncher/mse_cvf_h264_d13_talker.ini ${D}/${sysconfdir}/avblauncher + install -m 644 ${S}/etc/avblauncher/mse_cvf_h264_listener.ini ${D}/${sysconfdir}/avblauncher + install -m 644 ${S}/etc/avblauncher/mse_cvf_h264_talker.ini ${D}/${sysconfdir}/avblauncher + install -m 755 ${S}/etc/avblauncher/mse_cvf_mjpeg.sh ${D}/${sysconfdir}/avblauncher + install -m 644 ${S}/etc/avblauncher/mse_cvf_mjpeg_listener.ini ${D}/${sysconfdir}/avblauncher + install -m 644 ${S}/etc/avblauncher/mse_cvf_mjpeg_talker.ini ${D}/${sysconfdir}/avblauncher + install -m 755 ${S}/etc/avblauncher/mse_iec61883_4.sh ${D}/${sysconfdir}/avblauncher + install -m 644 ${S}/etc/avblauncher/mse_iec61883_4_listener.ini ${D}/${sysconfdir}/avblauncher + install -m 644 ${S}/etc/avblauncher/mse_iec61883_4_talker.ini ${D}/${sysconfdir}/avblauncher + install -m 755 ${S}/etc/avblauncher/mse_iec61883_6.sh ${D}/${sysconfdir}/avblauncher + install -m 644 ${S}/etc/avblauncher/mse_iec61883_6_listener.ini ${D}/${sysconfdir}/avblauncher + install -m 644 ${S}/etc/avblauncher/mse_iec61883_6_talker.ini ${D}/${sysconfdir}/avblauncher + install -m 755 ${S}/etc/avblauncher/simple_application.sh ${D}/${sysconfdir}/avblauncher + install -m 644 ${S}/etc/avblauncher/simple_listener.ini ${D}/${sysconfdir}/avblauncher + install -m 644 ${S}/etc/avblauncher/simple_talker.ini ${D}/${sysconfdir}/avblauncher + install -m 644 ${S}/etc/avblauncher/avdecc_entity_audio.yaml ${D}/${sysconfdir}/avblauncher +} + +PACKAGES =+ " \ + ${PN}-simple \ + ${PN}-mrpdummy \ + ${PN}-avblauncher \ +" + +ALLOW_EMPTY_${PN} = "1" + +FILES_${PN}-mrpdummy = " \ + ${bindir}/mrpdummy \ +" + +FILES_${PN}-avblauncher = " \ + ${sysconfdir}/daemon_cl/gptp_cfg_100mb.ini \ + ${sysconfdir}/daemon_cl/gptp_cfg.ini \ + ${sysconfdir}/avblauncher/mse_aaf_pcm.sh \ + ${sysconfdir}/avblauncher/mse_aaf_pcm_listener.ini \ + ${sysconfdir}/avblauncher/mse_aaf_pcm_talker.ini \ + ${sysconfdir}/avblauncher/mse_cvf_h264.sh \ + ${sysconfdir}/avblauncher/mse_cvf_h264_d13.sh \ + ${sysconfdir}/avblauncher/mse_cvf_h264_d13_listener.ini \ + ${sysconfdir}/avblauncher/mse_cvf_h264_d13_talker.ini \ + ${sysconfdir}/avblauncher/mse_cvf_h264_listener.ini \ + ${sysconfdir}/avblauncher/mse_cvf_h264_talker.ini \ + ${sysconfdir}/avblauncher/mse_cvf_mjpeg.sh \ + ${sysconfdir}/avblauncher/mse_cvf_mjpeg_listener.ini \ + ${sysconfdir}/avblauncher/mse_cvf_mjpeg_talker.ini \ + ${sysconfdir}/avblauncher/mse_iec61883_4.sh \ + ${sysconfdir}/avblauncher/mse_iec61883_4_listener.ini \ + ${sysconfdir}/avblauncher/mse_iec61883_4_talker.ini \ + ${sysconfdir}/avblauncher/mse_iec61883_6.sh \ + ${sysconfdir}/avblauncher/mse_iec61883_6_listener.ini \ + ${sysconfdir}/avblauncher/mse_iec61883_6_talker.ini \ + ${sysconfdir}/avblauncher/simple_application.sh \ + ${sysconfdir}/avblauncher/simple_listener.ini \ + ${sysconfdir}/avblauncher/simple_talker.ini \ + ${sysconfdir}/avblauncher/avdecc_entity_audio.yaml \ + ${bindir}/avblauncher \ +" + +FILES_${PN}-simple = " \ + ${sysconfdir}/linuxptp/avb-demoapps.cfg \ + ${bindir}/simple_talker \ + ${bindir}/simple_listener \ +" + +RDEPENDS_${PN} = " \ + ${PN}-simple \ + ${PN}-avblauncher \ +" + +RDEPENDS_${PN}-avblauncher = " \ + ${PN}-mrpdummy \ +" diff --git a/meta-rcar-gen3/recipes-multimedia/avb-applications/avbtool.bb b/meta-rcar-gen3/recipes-multimedia/avb-applications/avbtool.bb new file mode 100644 index 0000000..5c00277 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/avb-applications/avbtool.bb @@ -0,0 +1,17 @@ +DESCRIPTION = "Utility tool of the AVB Streaming Driver for Linux for the R-Car Gen3" + +require avb-applications.inc + +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://COPYING.MIT;md5=96659f2a7571bfa27483882a653c3bb9" + +DEPENDS = "kernel-module-avb-streaming" + +S = "${WORKDIR}/git/avbtool" + +EXTRA_OEMAKE = "'CC=${CC}'" + +do_install_append() { + install -d ${D}/${bindir} + install -m 755 ${S}/avbtool ${D}/${bindir} +} diff --git a/meta-rcar-gen3/recipes-multimedia/cms-module/cms-user-module.bb b/meta-rcar-gen3/recipes-multimedia/cms-module/cms-user-module.bb new file mode 100644 index 0000000..645d8b8 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/cms-module/cms-user-module.bb @@ -0,0 +1,74 @@ +DESCRIPTION = "R-Car Gen3 Color Management System" +LICENSE = "CLOSED" + +require include/cms-control.inc + +SRC_CMSBCM = "${@bb.utils.contains('USE_CMSBCM', '1', 'file://RTM0AC0000JRCMBCV0SL40C.tar.gz;subdir=cms/bcm', '', d)}" +SRC_CMSBLC = "${@bb.utils.contains('USE_CMSBLC', '1', 'file://RTM0AC0000JRCMBLC0SL40C.tar.gz;subdir=cms/blc', '', d)}" +SRC_CMSDGC = "${@bb.utils.contains('USE_CMSDGC', '1', 'file://RTM0AC0000JRCMDGV0SL40C.tar.gz;subdir=cms/dgc', '', d)}" + +SRC_URI = " \ + ${SRC_CMSBCM} \ + ${SRC_CMSBLC} \ + ${SRC_CMSDGC} \ +" + +S = "${WORKDIR}/cms" + +PACKAGE_ARCH = "${MACHINE_ARCH}" + +do_configure[noexec] = "1" +do_compile[noexec] = "1" + +do_install() { + # Create the lib directory + install -d ${D}/${libdir} + + if [ "X${USE_CMSBCM}" = "X1" ]; then + install -d ${D}/${includedir}/cms/bcm + install -m 755 ${S}/bcm/${baselib}/libcmsbcm.so.0.5.2 ${D}/${libdir} + install -m 644 ${S}/bcm/include/*.h ${D}/${includedir}/cms/bcm + + cd ${D}/${libdir} + ln -s libcmsbcm.so.0.5.2 libcmsbcm.so.0 + ln -s libcmsbcm.so.0 libcmsbcm.so + fi + + if [ "X${USE_CMSBLC}" = "X1" ]; then + install -d ${D}/${includedir}/cms/blc + install -m 755 ${S}/blc/${baselib}/libcmsblc.so.0.5.2 ${D}/${libdir} + install -m 644 ${S}/blc/include/*.h ${D}/${includedir}/cms/blc + + cd ${D}/${libdir} + ln -s libcmsblc.so.0.5.2 libcmsblc.so.0 + ln -s libcmsblc.so.0 libcmsblc.so + fi + + if [ "X${USE_CMSDGC}" = "X1" ]; then + install -d ${D}/${includedir}/cms/dgc + install -m 755 ${S}/dgc/${baselib}/libcmsdgc.so.0.5.1 ${D}/${libdir} + install -m 644 ${S}/dgc/include/*.h ${D}/${includedir}/cms/dgc + + cd ${D}/${libdir} + ln -s libcmsdgc.so.0.5.1 libcmsdgc.so.0 + ln -s libcmsdgc.so.0 libcmsdgc.so + fi +} + +FILES_${PN} = " \ + ${libdir}/*.so.* \ + ${libdir}/lib*.so \ +" + +FILES_${PN}-dev = " \ + ${includedir} \ +" + +INSANE_SKIP_${PN} = "dev-so" + +# Skip debug strip of do_populate_sysroot() +INHIBIT_SYSROOT_STRIP = "1" + +# Skip debug split and strip of do_package() +INHIBIT_PACKAGE_DEBUG_SPLIT = "1" +INHIBIT_PACKAGE_STRIP = "1" diff --git a/meta-rcar-gen3/recipes-multimedia/dtv-module/dtv-user-module.bb b/meta-rcar-gen3/recipes-multimedia/dtv-module/dtv-user-module.bb new file mode 100644 index 0000000..76d96f8 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/dtv-module/dtv-user-module.bb @@ -0,0 +1,72 @@ +DESCRIPTION = "ISDB-T DTV Software Package for Linux for the R-Car Gen3" +LICENSE = "CLOSED" + +require include/rcar-gen3-modules-common.inc +require include/dtv-dvd-control.inc + +inherit distro_features_check + +DEPENDS = " \ + kernel-module-vspmif mmngr-user-module \ + vspmif-user-module kernel-module-vspmif kernel-module-vspm \ + omx-user-module kernel-module-uvcs-drv \ + kernel-module-scu-src kernel-module-ssp \ + kernel-module-tddmac kernel-module-tsif \ +" + +PN = "dtv-user-module" +PR = "r0" + +PACKAGE_ARCH = "${MACHINE_ARCH}" + +REQUIRED_DISTRO_FEATURES = "dtv" + +SRC_URI_DTV_SW = "file://Software.tar.gz" +SRC_URI_DTV_UDF = "file://Reference.tar.gz" + +SRC_URI = " \ + ${SRC_URI_DTV_SW} \ + ${SRC_URI_DTV_UDF} \ +" + +S = "${WORKDIR}" + +# do_configure() nothing +do_configure[noexec] = "1" +# do_compile() nothing +do_compile[noexec] = "1" + +do_install() { + # Create destination folders + install -d ${D}/${libdir} + install -d ${D}/usr/local/include + install -d ${D}/usr/local/src/dtv/reference + + # Copy library + install -m 644 ${S}/${baselib}/*.a ${D}/${libdir}/ + + # Copy shared header files + install -m 644 ${S}/include/*.h ${D}/usr/local/include + + # Copy reference files + install -m 644 ${S}/userfunc/*.h ${D}/usr/local/src/dtv/reference + install -m 644 ${S}/userfunc/*.c ${D}/usr/local/src/dtv/reference +} + +PACKAGES = " \ + ${PN} \ + ${PN}-dev \ + ${PN}-staticdev \ +" + +FILES_${PN} = "" +ALLOW_EMPTY_${PN} = "1" + +FILES_${PN}-dev = " \ + /usr/local/include/*.h \ + /usr/local/src/dtv/reference/* \ +" +FILES_${PN}-staticdev = " \ + ${libdir}/*.a \ +" +INHIBIT_PACKAGE_DEBUG_SPLIT = "1" diff --git a/meta-rcar-gen3/recipes-multimedia/dvd-module/dvd-user-module.bb b/meta-rcar-gen3/recipes-multimedia/dvd-module/dvd-user-module.bb new file mode 100644 index 0000000..ff3633b --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/dvd-module/dvd-user-module.bb @@ -0,0 +1,62 @@ +DESCRIPTION = "DVD Core-Middleware for Linux for the R-Car Gen3" +LICENSE = "CLOSED" + +require include/rcar-gen3-modules-common.inc +require include/dtv-dvd-control.inc + +inherit distro_features_check + +DEPENDS = " \ + kernel-module-vspmif mmngr-user-module \ + vspmif-user-module kernel-module-vspmif kernel-module-vspm \ + omx-user-module kernel-module-uvcs-drv \ +" + +PN = "dvd-user-module" +PR = "r0" + +PACKAGE_ARCH = "${MACHINE_ARCH}" + +REQUIRED_DISTRO_FEATURES = "dvd" + +SRC_URI_DVD_SW = "file://Software.tar.gz" + +SRC_URI = " \ + ${SRC_URI_DVD_SW} \ +" + +S = "${WORKDIR}" + +# do_configure() nothing +do_configure[noexec] = "1" +# do_compile() nothing +do_compile[noexec] = "1" + +do_install() { + # Create destination folders + install -d ${D}/${libdir} + install -d ${D}/usr/local/include + + # Copy library + install -m 644 ${S}/${baselib}/*.a ${D}/${libdir} + + # Copy shared header files + install -m 644 ${S}/include/*.h ${D}/usr/local/include +} + +PACKAGES = " \ + ${PN} \ + ${PN}-dev \ + ${PN}-staticdev \ +" + +FILES_${PN} = "" +ALLOW_EMPTY_${PN} = "1" + +FILES_${PN}-dev = " \ + /usr/local/include/*.h \ +" +FILES_${PN}-staticdev = " \ + ${libdir}/*.a \ +" +INHIBIT_PACKAGE_DEBUG_SPLIT = "1" diff --git a/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-omx_1.2.0.bbappend b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-omx_1.2.0.bbappend new file mode 100644 index 0000000..cf19c00 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-omx_1.2.0.bbappend @@ -0,0 +1,24 @@ +SRC_URI = "git://github.com/renesas-rcar/gst-omx.git;branch=RCAR-GEN3/1.2.0" + +DEPENDS += "omx-user-module mmngrbuf-user-module" + +SRCREV = "39061698da1b8e29b1cfc8648210837cbdc11295" + +LIC_FILES_CHKSUM = "file://COPYING;md5=4fbd65380cdd255951079008b364516c \ + file://omx/gstomx.h;beginline=1;endline=22;md5=9281ffe981001da5a13db0303fa7c4ab \ +" + +S = "${WORKDIR}/git" + +GSTREAMER_1_0_OMX_TARGET = "rcar" +GSTREAMER_1_0_OMX_CORE_NAME = "${libdir}/libomxr_core.so" +EXTRA_OECONF_append = " --enable-experimental" +EXTRA_OECONF_append = " --with-omx-header-path=${S}/omx/openmax" + +do_configure_prepend() { + cd ${S} + ./autogen.sh --noconfigure + cd ${B} +} + +RDEPENDS_${PN} = "libwayland-egl" diff --git a/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-h3ulcb_r8a7795.conf b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-h3ulcb_r8a7795.conf new file mode 100644 index 0000000..4807dc3 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-h3ulcb_r8a7795.conf @@ -0,0 +1,2 @@ +input-device-name=/dev/video12 +output-device-name=/dev/video13 diff --git a/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-m3ulcb_r8a7796.conf b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-m3ulcb_r8a7796.conf new file mode 100644 index 0000000..890c5ad --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-m3ulcb_r8a7796.conf @@ -0,0 +1,2 @@ +input-device-name=/dev/video6 +output-device-name=/dev/video7 diff --git a/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-salvator-x_r8a7795.conf b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-salvator-x_r8a7795.conf new file mode 100644 index 0000000..586b13b --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-salvator-x_r8a7795.conf @@ -0,0 +1,2 @@ +input-device-name=/dev/video20 +output-device-name=/dev/video21 diff --git a/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-salvator-x_r8a7796.conf b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-salvator-x_r8a7796.conf new file mode 100644 index 0000000..74a8ab9 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-salvator-x_r8a7796.conf @@ -0,0 +1,2 @@ +input-device-name=/dev/video14 +output-device-name=/dev/video15 diff --git a/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter_1.0.0.bb b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter_1.0.0.bb new file mode 100644 index 0000000..f7b573e --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter_1.0.0.bb @@ -0,0 +1,37 @@ +SUMMARY = "GStreamer VSP filter plugin" +SECTION = "multimedia" +LICENSE = "GPLv2+" +DEPENDS = "gstreamer1.0 gstreamer1.0-plugins-base pkgconfig" +LIC_FILES_CHKSUM = "file://COPYING.LIB;md5=4fbd65380cdd255951079008b364516c" +inherit autotools + +PN = "gstreamer1.0-plugin-vspfilter" + +EXTRA_AUTORECONF_append = " -I ${STAGING_DATADIR}/aclocal" + +VSPFILTER_CONF_r8a7795 = "gstvspfilter-${MACHINE}_r8a7795.conf" +VSPFILTER_CONF_r8a7796 = "gstvspfilter-${MACHINE}_r8a7796.conf" + +SRC_URI = " \ + git://github.com/renesas-rcar/gst-plugin-vspfilter.git;branch=RCAR-GEN3/1.0.0 \ + file://${VSPFILTER_CONF} \ +" + +SRCREV = "a1fa0a51e7d93ddd04b66521f8c5c4a486fdcc17" + +S = "${WORKDIR}/git" + +FILES_${PN} = " \ + ${libdir}/gstreamer-1.0/libgstvspfilter.so \ + ${sysconfdir}/gstvspfilter.conf" +FILES_${PN}-dev = "${libdir}/gstreamer-1.0/libgstvspfilter.la" +FILES_${PN}-staticdev = "${libdir}/gstreamer-1.0/libgstvspfilter.a" +FILES_${PN}-dbg = " \ + ${libdir}/gstreamer-1.0/.debug \ + ${prefix}/src" + +do_install_append() { + install -Dm 644 ${WORKDIR}/${VSPFILTER_CONF} ${D}/etc/gstvspfilter.conf +} + +RDEPENDS_${PN} = "kernel-module-vsp2driver" diff --git a/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_1.6.3.bbappend b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_1.6.3.bbappend new file mode 100644 index 0000000..0b78fc2 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_1.6.3.bbappend @@ -0,0 +1,28 @@ +SRC_URI = "git://github.com/renesas-rcar/gst-plugins-bad.git;branch=RCAR-GEN3/1.6.3" +SRC_URI += " \ + file://configure-allow-to-disable-libssh2.patch \ + file://0001-glimagesink-Downrank-to-marginal.patch \ + file://0002-glplugin-glwindow-fix-memory-leak-of-navigation-thre.patch \ +" +SRCREV = "3143b25ca69f1f6bacdac0a33248007c979ba4a5" + +DEPENDS += "weston" + +S = "${WORKDIR}/git" + +# submodule is extracted before do_populate_lic +addtask do_init_submodule after do_unpack before do_patch + +do_init_submodule() { + cd ${S} + git submodule init + git submodule update +} + +do_configure_prepend() { + cd ${S} + ./autogen.sh --noconfigure + cd ${B} +} + +RDEPENDS_${PN} = "libwayland-egl" diff --git a/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-good_1.6.3.bbappend b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-good_1.6.3.bbappend new file mode 100644 index 0000000..67afefd --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-good_1.6.3.bbappend @@ -0,0 +1,29 @@ +SRC_URI = "git://github.com/renesas-rcar/gst-plugins-good.git;branch=RCAR-GEN3/1.6.3" + +# patches come from poky +SRC_URI += " \ + file://0001-gstrtpmp4gpay-set-dafault-value-for-MPEG4-without-co.patch \ +" + +SRCREV = "ef4a8e903673cd0415ac7485b700b022c2e4410a" + +DEPENDS += "mmngrbuf-user-module" + +S = "${WORKDIR}/git" + +EXTRA_OECONF_append = " --enable-cont-frame-capture" + +# submodule is extracted before do_populate_lic +addtask do_init_submodule after do_unpack before do_patch + +do_init_submodule() { + cd ${S} + git submodule init + git submodule update +} + +do_configure_prepend() { + cd ${S} + ./autogen.sh --noconfigure + cd ${B} +} diff --git a/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngr-user-module.bb b/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngr-user-module.bb new file mode 100644 index 0000000..b22490e --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngr-user-module.bb @@ -0,0 +1,23 @@ +DESCRIPTION = "Memory Manager User module for Renesas R-Car Gen3" +require mmngr_lib.inc + +DEPENDS = "kernel-module-mmngr" +PN = "mmngr-user-module" +PR = "r0" + +S = "${WORKDIR}/git/libmmngr/mmngr" + +EXTRA_OECONF = "${@bb.utils.contains("DISTRO_FEATURES", "mm-test", \ + " --enable-mmngr-test", "", d)}" + +exec_prefix = "/usr" +bindir = "/usr/local/bin" +includedir = "/usr/local/include" + +do_install_append() { + if [ -f ${D}/usr/local/bin/mmtp ]; then + if [ X${WS} = "X32" ]; then + mv ${D}/usr/local/bin/mmtp ${D}/usr/local/bin/mmtp${WS} + fi + fi +} diff --git a/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngr_lib.inc b/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngr_lib.inc new file mode 100644 index 0000000..4474c61 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngr_lib.inc @@ -0,0 +1,18 @@ +# Common path of MMNGR and MMNGRBUF module +LICENSE = "MIT" +LIC_FILES_CHKSUM = "\ + file://${WORKDIR}/git/COPYING.MIT;md5=30a99e0d36a3da1f5cf93c070ad7888a" + +MMNGR_LIB_URI = "git://github.com/renesas-rcar/mmngr_lib.git" + +SRC_URI = "${MMNGR_LIB_URI};branch=rcar_gen3" +SRCREV = "6f7b2c35afea5513aeb0ac3b182ff28726f2952c" + +# Get Wordsize of test app and change their names later to avoid override +WS_aarch64 = "" +WS_virtclass-multilib-lib32 = "32" + +# These modules are machine specific. +PACKAGE_ARCH = "${MACHINE_ARCH}" + +inherit autotools diff --git a/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngrbuf-user-module.bb b/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngrbuf-user-module.bb new file mode 100644 index 0000000..916d567 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngrbuf-user-module.bb @@ -0,0 +1,23 @@ +DESCRIPTION = "Memory Manager Buffer User module for Renesas R-Car Gen3" +require mmngr_lib.inc + +DEPENDS = "kernel-module-mmngrbuf" +PN = "mmngrbuf-user-module" +PR = "r0" + +S = "${WORKDIR}/git/libmmngr/mmngrbuf" + +EXTRA_OECONF = "${@bb.utils.contains("DISTRO_FEATURES", "mm-test", \ + " --enable-mmngrbuf-test", "", d)}" + +exec_prefix = "/usr" +bindir = "/usr/local/bin" +includedir = "/usr/local/include" + +do_install_append() { + if [ -f ${D}/usr/local/bin/mmbuftp ]; then + if [ X${WS} = "X32" ]; then + mv ${D}/usr/local/bin/mmbuftp ${D}/usr/local/bin/mmbuftp${WS} + fi + fi +} diff --git a/meta-rcar-gen3/recipes-multimedia/omx-module/deltask-omx-user-module.inc b/meta-rcar-gen3/recipes-multimedia/omx-module/deltask-omx-user-module.inc new file mode 100644 index 0000000..6f3f847 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/omx-module/deltask-omx-user-module.inc @@ -0,0 +1,2 @@ +deltask do_configure +deltask do_compile diff --git a/meta-rcar-gen3/recipes-multimedia/omx-module/libalacdla-l.bb b/meta-rcar-gen3/recipes-multimedia/omx-module/libalacdla-l.bb new file mode 100644 index 0000000..f370778 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/omx-module/libalacdla-l.bb @@ -0,0 +1,61 @@ +DESCRIPTION = "ALAC decoder library" +SECTION = "libs" +LICENSE = "Apache-2.0 & APSL-2.0" +LIC_FILES_CHKSUM = " \ + file://LICENSE;md5=5cf67868b9e038eccb149ec80809d9f5 \ + file://APPLE_LICENSE.txt;md5=b180a94f894d2a868d40ea43da2bbaba \ +" + +PACKAGE_ARCH = "${MACHINE_ARCH}" + +DEPENDS = " \ + kernel-module-mmngr mmngr-user-module \ + vspmif-user-module kernel-module-vspmif \ + kernel-module-vspm kernel-module-vsp2driver \ +" + +RDEPENDS_${PN} += "mmngr-user-module vspmif-user-module" + +SRC_URI = "git://github.com/renesas-rcar/alac_decoder.git;branch=master" +SRCREV = "30eea301f6b3be87e58f2db0f479d0045ad66764" + +S = "${WORKDIR}/git" +B = "${S}/build/linux_armyocto/lib" + +EXTRA_OEMAKE = "ARCH=${ARCH}" + +ARCH = "arm" +ARCH_aarch64 = "arm64" + +do_install() { + # Create directories + install -d ${D}/${libdir} + install -d ${D}/${includedir} + + # Install library + install -m 755 ${S}/build/linux_armyocto/libALACDLA_L.so.2.0 ${D}/${libdir}/ + + # Create symbolic link + cd ${D}/${libdir} + ln -s libALACDLA_L.so.2.0 libALACDLA_L.so.2 + ln -s libALACDLA_L.so.2 libALACDLA_L.so + + # Install shared header file + install -m 644 ${S}/lib/alacd_Lib.h ${D}/${includedir}/ +} + +FILES_${PN} += " \ + ${libdir}/libALACDLA_L.so.* \ + ${libdir}/libALACDLA_L.so \ +" + +FILES_${PN}-dev = "${includedir}/*.h" + +INSANE_SKIP_${PN} += "dev-so" + +# Skip debug strip of do_populate_sysroot() +INHIBIT_SYSROOT_STRIP = "1" + +# Skip debug split and strip of do_package() +INHIBIT_PACKAGE_DEBUG_SPLIT = "1" +INHIBIT_PACKAGE_STRIP = "1" diff --git a/meta-rcar-gen3/recipes-multimedia/omx-module/libflacdla-l.bb b/meta-rcar-gen3/recipes-multimedia/omx-module/libflacdla-l.bb new file mode 100644 index 0000000..c7e405c --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/omx-module/libflacdla-l.bb @@ -0,0 +1,50 @@ +DESCRIPTION = "FLAC decoder library" +SECTION = "libs" +LICENSE = "BSD" +LIC_FILES_CHKSUM = "file://COPYING.Xiph;md5=a2c4b71c0198682376d483eb5bcc9197" + +PACKAGE_ARCH = "${MACHINE_ARCH}" + +SRC_URI = "git://github.com/renesas-rcar/flac_decoder.git;branch=master" +SRCREV = "75791faa549e60fdad34228e6e13a2560962e9ae" + +S = "${WORKDIR}/git" +B = "${S}/build/linux_armyocto/lib" + +EXTRA_OEMAKE = "ARCH=${ARCH}" + +ARCH = "arm" +ARCH_aarch64 = "arm64" + +do_install() { + # Create directories + install -d ${D}/${libdir} + install -d ${D}/${includedir} + + # Install library + install -m 755 ${S}/build/linux_armyocto/libFLACDLA_L.so.2.0 ${D}/${libdir}/ + + # Create symbolic link + cd ${D}/${libdir} + ln -s libFLACDLA_L.so.2.0 libFLACDLA_L.so.2 + ln -s libFLACDLA_L.so.2 libFLACDLA_L.so + + # Install shared header file + install -m 644 ${S}/lib/flacd_Lib.h ${D}/${includedir}/ +} + +FILES_${PN} += " \ + ${libdir}/libFLACDLA_L.so.* \ + ${libdir}/libFLACDLA_L.so \ +" + +FILES_${PN}-dev = "${includedir}/*.h" + +INSANE_SKIP_${PN} += "dev-so" + +# Skip debug strip of do_populate_sysroot() +INHIBIT_SYSROOT_STRIP = "1" + +# Skip debug split and strip of do_package() +INHIBIT_PACKAGE_DEBUG_SPLIT = "1" +INHIBIT_PACKAGE_STRIP = "1" diff --git a/meta-rcar-gen3/recipes-multimedia/omx-module/omx-user-module.bb b/meta-rcar-gen3/recipes-multimedia/omx-module/omx-user-module.bb new file mode 100644 index 0000000..87a5937 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/omx-module/omx-user-module.bb @@ -0,0 +1,449 @@ +DESCRIPTION = "OMX Media Components R-Car Gen3" +LICENSE = "CLOSED" +require include/omx-control.inc +require include/rcar-gen3-modules-common.inc + +DEPENDS = " \ + kernel-module-mmngr mmngr-user-module \ + vspmif-user-module kernel-module-vspmif \ + kernel-module-vspm kernel-module-vsp2driver \ +" + +# Task Control. Compile is not performed when not installing OMX Video and Audio Libs. +# Note) dummy-omx-user-module.inc does not exist. +INCLUDE_FILE = '${@base_conditional("USE_OMX_COMMON", "1", "dummy", "deltask", d )}' +include ${INCLUDE_FILE}-omx-user-module.inc + +DEPENDS += '${@base_conditional("USE_VIDEO_OMX", "1", "kernel-module-uvcs-drv", "", d )}' + +inherit autotools + +includedir = "/usr/local/include" +PACKAGE_ARCH = "${MACHINE_ARCH}" + +OMX_EVA_PREFIX = '${@base_conditional("USE_OMX_EVA_PKG", "1", "EVA", "", d )}' + +# SRC file name +SRC_URI_OMX = '${@base_conditional("USE_OMX_COMMON", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XCMCTL30SL40C.tar.bz2;unpack=0", "", d )}' +SRC_URI_VCMND = '${@base_conditional("USE_VIDEO_DEC", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XVCMND30SL40C.tar.bz2;unpack=0", "", d )}' +SRC_URI_VCMNE = '${@base_conditional("USE_VIDEO_ENC", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XVCMNE30SL40C.tar.bz2;unpack=0", "", d )}' +SRC_URI_H263D = '${@base_conditional("USE_H263D_OMX", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XV263D30SL40C.tar.bz2", "", d )}' +SRC_URI_H264D = '${@base_conditional("USE_H264D_OMX", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XV264D30SL40C.tar.bz2", "", d )}' +SRC_URI_H264E = '${@base_conditional("USE_H264E_OMX", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XV264E30SL40C.tar.bz2", "", d )}' +SRC_URI_H265D = '${@base_conditional("USE_H265D_OMX", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XV265D30SL40C.tar.bz2", "", d )}' +SRC_URI_MPEG2D = '${@base_conditional("USE_MPEG2D_OMX", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XVM2VD30SL40C.tar.bz2", "", d )}' +SRC_URI_MPEG4D = '${@base_conditional("USE_MPEG4D_OMX", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XVM4VD30SL40C.tar.bz2", "", d )}' +SRC_URI_VC1D = '${@base_conditional("USE_VC1D_OMX", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XVVC1D30SL40C.tar.bz2", "", d )}' +SRC_URI_DIVXD = '${@base_conditional("USE_DIVXD_OMX", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XVDVXD30SL40C.tar.bz2", "", d )}' +SRC_URI_RVD = '${@base_conditional("USE_RVD_OMX", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XVRLVD30SL40C.tar.bz2", "", d )}' +SRC_URI_ACMND = '${@base_conditional("USE_AUDIO_OMX", "1", "file://RTM0AC0000XACMND30SL40C.tar.gz", "", d )}' +SRC_URI_AACLC = '${@base_conditional("USE_AACLCD_OMX", "1", "file://RTM0AC0000XAAACD30SL40C.tar.gz", "", d )}' +SRC_URI_AACPV2 = '${@base_conditional("USE_AACPV2D_OMX", "1", "file://RTM0AC0000XAAAPD30SL40C.tar.gz", "", d )}' +SRC_URI_MP3 = '${@base_conditional("USE_MP3D_OMX", "1", "file://RTM0AC0000XAMP3D30SL40C.tar.gz", "", d )}' +SRC_URI_AACLCE = '${@base_conditional("USE_AACLCE_OMX", "1", "file://RTM0AC0000XAAACE30SL40C.tar.gz", "", d )}' +SRC_URI_WMA = '${@base_conditional("USE_WMAD_OMX", "1", "file://RTM0AC0000XAWMAD30SL40C.tar.gz", "", d )}' +SRC_URI_ALACD = '${@base_conditional("USE_ALACD_OMX", "1", "file://RTM0AC0000XAALAD30SL40C.tar.gz", "", d )}' +SRC_URI_FLACD = '${@base_conditional("USE_FLACD_OMX", "1", "file://RTM0AC0000XAFLAD30SL40C.tar.gz", "", d )}' +SRC_URI_DDD = '${@base_conditional("USE_DDD_OMX", "1", "file://RTM0AC0000XADD5D30SL40C.tar.gz", "", d )}' +SRC_URI_AACMZ = '${@base_conditional("USE_AACLC_MDW", "1", "file://RTM0AC0000ADAACMZ1SL40C.tar.gz", "", d )}' +SRC_URI_AACPV2MZ = '${@base_conditional("USE_AACPV2_MDW", "1", "file://RTM0AC0000ADAAPMZ1SL40C.tar.gz", "", d )}' +SRC_URI_MP3MZ = '${@base_conditional("USE_MP3_MDW", "1", "file://RTM0AC0000ADMP3MZ1SL40C.tar.gz", "", d )}' +SRC_URI_WMAMZ = '${@base_conditional("USE_WMA_MDW", "1", "file://RTM0AC0000ADWMAMZ1SL40C.tar.gz", "", d )}' +SRC_URI_DDMZ = '${@base_conditional("USE_DD_MDW", "1", "file://RTM0AC0000ADDD5MZ1SL40C.tar.gz", "", d )}' +SRC_URI_AEAACMZ = '${@base_conditional("USE_AACLCE_MDW", "1", "file://RTM0AC0000AEAACMZ1SL40C.tar.gz", "", d )}' + +SRC_URI = " \ + ${SRC_URI_OMX} \ + ${SRC_URI_VCMND} \ + ${SRC_URI_VCMNE} \ + ${SRC_URI_H263D} \ + ${SRC_URI_H264D} \ + ${SRC_URI_H264E} \ + ${SRC_URI_H265D} \ + ${SRC_URI_MPEG2D} \ + ${SRC_URI_MPEG4D} \ + ${SRC_URI_VC1D} \ + ${SRC_URI_DIVXD} \ + ${SRC_URI_RVD} \ + ${SRC_URI_ACMND} \ + ${SRC_URI_AACLC} \ + ${SRC_URI_AACPV2} \ + ${SRC_URI_MP3} \ + ${SRC_URI_WMA} \ + ${SRC_URI_ALACD} \ + ${SRC_URI_FLACD} \ + ${SRC_URI_DDD} \ + ${SRC_URI_AACLCE} \ + ${SRC_URI_AACMZ} \ + ${SRC_URI_AACPV2MZ} \ + ${SRC_URI_MP3MZ} \ + ${SRC_URI_WMAMZ} \ + ${SRC_URI_DDMZ} \ + ${SRC_URI_AEAACMZ} \ +" + +# SRC directory name +OMX_COMMON_SRC = '${@base_conditional("USE_OMX_COMMON", "1", "${OMX_EVA_PREFIX}RTM0AC0000XCMCTL30SL40C", "", d )}' +OMX_VIDEO_DEC_COMMON_SRC = '${@base_conditional("USE_VIDEO_DEC", "1", "${OMX_EVA_PREFIX}RTM0AC0000XVCMND30SL40C", "", d )}' +OMX_VIDEO_ENC_COMMON_SRC = '${@base_conditional("USE_VIDEO_ENC", "1", "${OMX_EVA_PREFIX}RTM0AC0000XVCMNE30SL40C", "", d )}' + +OMX_H263_DEC_SRC = '${@base_conditional("USE_H263D_OMX", "1", "${OMX_EVA_PREFIX}RTM0AC0000XV263D30SL40C", "", d )}' +OMX_H264_DEC_SRC = '${@base_conditional("USE_H264D_OMX", "1", "${OMX_EVA_PREFIX}RTM0AC0000XV264D30SL40C", "", d )}' +OMX_H264_ENC_SRC = '${@base_conditional("USE_H264E_OMX", "1", "${OMX_EVA_PREFIX}RTM0AC0000XV264E30SL40C", "", d )}' +OMX_H265_DEC_SRC = '${@base_conditional("USE_H265D_OMX", "1", "${OMX_EVA_PREFIX}RTM0AC0000XV265D30SL40C", "", d )}' +OMX_MPEG2_DEC_SRC = '${@base_conditional("USE_MPEG2D_OMX", "1", "${OMX_EVA_PREFIX}RTM0AC0000XVM2VD30SL40C", "", d )}' +OMX_MPEG4_DEC_SRC = '${@base_conditional("USE_MPEG4D_OMX", "1", "${OMX_EVA_PREFIX}RTM0AC0000XVM4VD30SL40C", "", d )}' +OMX_VC1_DEC_SRC = '${@base_conditional("USE_VC1D_OMX", "1", "${OMX_EVA_PREFIX}RTM0AC0000XVVC1D30SL40C", "", d )}' +OMX_DIVX_DEC_SRC = '${@base_conditional("USE_DIVXD_OMX", "1", "${OMX_EVA_PREFIX}RTM0AC0000XVDVXD30SL40C", "", d )}' +OMX_RV_DEC_SRC = '${@base_conditional("USE_RVD_OMX", "1", "${OMX_EVA_PREFIX}RTM0AC0000XVRLVD30SL40C", "", d )}' + +OMX_VIDEO_SRC_LIST = " \ + ${OMX_COMMON_SRC} \ + ${OMX_VIDEO_DEC_COMMON_SRC} \ + ${OMX_VIDEO_ENC_COMMON_SRC} \ + ${OMX_H263_DEC_SRC} \ + ${OMX_H264_DEC_SRC} \ + ${OMX_H264_ENC_SRC} \ + ${OMX_H265_DEC_SRC} \ + ${OMX_MPEG2_DEC_SRC} \ + ${OMX_MPEG4_DEC_SRC} \ + ${OMX_VC1_DEC_SRC} \ + ${OMX_DIVX_DEC_SRC} \ + ${OMX_RV_DEC_SRC} \ +" + +AAC_MIDDLEWARE_SRC = "RTM0AC0000ADAACMZ1SL40C" +AACPV2_MIDDLEWARE_SRC = "RTM0AC0000ADAAPMZ1SL40C" +MP3_MIDDLEWARE_SRC = "RTM0AC0000ADMP3MZ1SL40C" +WMA_MIDDLEWARE_SRC = "RTM0AC0000ADWMAMZ1SL40C" +DD_MIDDLEWARE_SRC = "RTM0AC0000ADDD5MZ1SL40C" +AEAAC_MIDDLEWARE_SRC = "RTM0AC0000AEAACMZ1SL40C" + +OMX_AUDIO_COMMON_SRC = '${@base_conditional("USE_AUDIO_OMX", "1", "RTM0AC0000XACMND30SL40C", "", d )}' +OMX_AACLC_DEC_SRC = '${@base_conditional("USE_AACLCD_OMX", "1", "RTM0AC0000XAAACD30SL40C", "", d )}' +OMX_AACPV2_DEC_SRC = '${@base_conditional("USE_AACPV2D_OMX", "1", "RTM0AC0000XAAAPD30SL40C", "", d )}' +OMX_MP3_DEC_SRC = '${@base_conditional("USE_MP3D_OMX", "1", "RTM0AC0000XAMP3D30SL40C", "", d )}' +OMX_WMA_DEC_SRC = '${@base_conditional("USE_WMAD_OMX", "1", "RTM0AC0000XAWMAD30SL40C", "", d )}' +OMX_ALAC_DEC_SRC = '${@base_conditional("USE_ALACD_OMX", "1", "RTM0AC0000XAALAD30SL40C", "", d )}' +OMX_FLAC_DEC_SRC = '${@base_conditional("USE_FLACD_OMX", "1", "RTM0AC0000XAFLAD30SL40C", "", d )}' +OMX_DD_DEC_SRC = '${@base_conditional("USE_DDD_OMX", "1", "RTM0AC0000XADD5D30SL40C", "", d )}' +OMX_AACLC_ENC_SRC = '${@base_conditional("USE_AACLCE_OMX", "1", "RTM0AC0000XAAACE30SL40C", "", d )}' + +OMX_AUDIO_SRC_LIST = " \ + ${OMX_AUDIO_COMMON_SRC} \ + ${OMX_AACLC_DEC_SRC} \ + ${OMX_AACPV2_DEC_SRC} \ + ${OMX_MP3_DEC_SRC} \ + ${OMX_WMA_DEC_SRC} \ + ${OMX_ALAC_DEC_SRC} \ + ${OMX_FLAC_DEC_SRC} \ + ${OMX_DD_DEC_SRC} \ + ${OMX_AACLC_ENC_SRC} \ +" + +S = "${WORKDIR}/omx/" + +# Create ${S} directory +do_unpack_prepend() { + os.system("install -d ${S}") +} + +do_unpack_append() { + bb.build.exec_func('setup_build_tree', d) +} + +setup_build_tree() { + for omxmc in ${OMX_COMMON_SRC} ${OMX_VIDEO_DEC_COMMON_SRC} ${OMX_VIDEO_ENC_COMMON_SRC} + do + tar xf ${WORKDIR}/${omxmc}.tar.bz2 -C ${WORKDIR} + tar xf ${WORKDIR}/${omxmc}.tar.bz2 ${omxmc}/src --strip=2 -C ${S} + tar xf ${WORKDIR}/${omxmc}.tar.bz2 ${omxmc}/include --strip=1 -C ${S} + done +} + +B = "${S}" + +EXTRA_OECONF = "OMXR_DEFAULT_CONFIG_FILE_NAME=${sysconfdir}/omxr/omxr_config_base.txt" + +do_configure() { + export uvcsdrv_dir="${INCSHARED}" + chmod u+x autogen.sh + ./autogen.sh + oe_runconf +} + +do_install_omx_video() { + cd ${D}/${libdir} + for omxmc in ${OMX_VIDEO_SRC_LIST} + do + src="${WORKDIR}/${omxmc}" + install -m 755 ${src}/${baselib}/lib*.so.* ${D}/${libdir} + install -m 644 ${src}/include/*.h ${D}/${includedir} + install -m 644 ${src}/config/*.txt ${D}/${sysconfdir}/omxr + done + + if [ "X${USE_OMX_COMMON}" = "X1" ] ; then + ln -s libomxr_core.so.3.0.0 libomxr_core.so.3 + ln -s libomxr_core.so.3 libomxr_core.so + + ln -s libomxr_mc_cmn.so.3.0.0 libomxr_mc_cmn.so.3 + ln -s libomxr_mc_cmn.so.3 libomxr_mc_cmn.so + fi + + if [ "X${USE_VIDEO_OMX}" = "X1" ] ; then + ln -s libomxr_mc_vcmn.so.3.0.0 libomxr_mc_vcmn.so.3 + ln -s libomxr_mc_vcmn.so.3 libomxr_mc_vcmn.so + fi + + if [ "X${USE_VIDEO_DEC}" = "X1" ] ; then + ln -s libomxr_mc_vdcmn.so.3.0.0 libomxr_mc_vdcmn.so.3 + ln -s libomxr_mc_vdcmn.so.3 libomxr_mc_vdcmn.so + + ln -s libuvcs_dec.so.3.0.0 libuvcs_dec.so.3 + ln -s libuvcs_dec.so.3 libuvcs_dec.so + fi + + if [ "X${USE_VIDEO_ENC}" = "X1" ] ; then + ln -s libomxr_mc_vecmn.so.3.0.0 libomxr_mc_vecmn.so.3 + ln -s libomxr_mc_vecmn.so.3 libomxr_mc_vecmn.so + + ln -s libuvcs_enc.so.3.0.0 libuvcs_enc.so.3 + ln -s libuvcs_enc.so.3 libuvcs_enc.so + fi + + if [ "X${USE_H263D_OMX}" = "X1" ]; then + ln -s libomxr_mc_h263d.so.3.0.0 libomxr_mc_h263d.so.3 + ln -s libomxr_mc_h263d.so.3 libomxr_mc_h263d.so + + ln -s libuvcs_hv3d.so.3.0.0 libuvcs_hv3d.so.3 + ln -s libuvcs_hv3d.so.3 libuvcs_hv3d.so + fi + + if [ "X${USE_H264D_OMX}" = "X1" ]; then + ln -s libomxr_mc_h264d.so.3.0.0 libomxr_mc_h264d.so.3 + ln -s libomxr_mc_h264d.so.3 libomxr_mc_h264d.so + + ln -s libuvcs_avcd.so.3.0.0 libuvcs_avcd.so.3 + ln -s libuvcs_avcd.so.3 libuvcs_avcd.so + fi + + if [ "X${USE_H264E_OMX}" = "X1" ]; then + ln -s libomxr_mc_h264e.so.3.0.0 libomxr_mc_h264e.so.3 + ln -s libomxr_mc_h264e.so.3 libomxr_mc_h264e.so + + ln -s libuvcs_avce.so.3.0.0 libuvcs_avce.so.3 + ln -s libuvcs_avce.so.3 libuvcs_avce.so + fi + + if [ "X${USE_H265D_OMX}" = "X1" ]; then + ln -s libomxr_mc_hevd.so.3.0.0 libomxr_mc_hevd.so.3 + ln -s libomxr_mc_hevd.so.3 libomxr_mc_hevd.so + + ln -s libuvcs_hevd.so.3.0.0 libuvcs_hevd.so.3 + ln -s libuvcs_hevd.so.3 libuvcs_hevd.so + fi + + if [ "X${USE_MPEG2D_OMX}" = "X1" ]; then + ln -s libomxr_mc_m2vd.so.3.0.0 libomxr_mc_m2vd.so.3 + ln -s libomxr_mc_m2vd.so.3 libomxr_mc_m2vd.so + + ln -s libuvcs_m2vd.so.3.0.0 libuvcs_m2vd.so.3 + ln -s libuvcs_m2vd.so.3 libuvcs_m2vd.so + fi + + if [ "X${USE_MPEG4D_OMX}" = "X1" ]; then + ln -s libomxr_mc_m4vd.so.3.0.0 libomxr_mc_m4vd.so.3 + ln -s libomxr_mc_m4vd.so.3 libomxr_mc_m4vd.so + + ln -s libuvcs_m4vd.so.3.0.0 libuvcs_m4vd.so.3 + ln -s libuvcs_m4vd.so.3 libuvcs_m4vd.so + fi + + if [ "X${USE_VC1D_OMX}" = "X1" ]; then + ln -s libomxr_mc_vc1d.so.3.0.0 libomxr_mc_vc1d.so.3 + ln -s libomxr_mc_vc1d.so.3 libomxr_mc_vc1d.so + + ln -s libuvcs_vc1d.so.3.0.0 libuvcs_vc1d.so.3 + ln -s libuvcs_vc1d.so.3 libuvcs_vc1d.so + fi + + if [ "X${USE_DIVXD_OMX}" = "X1" ]; then + ln -s libomxr_mc_divxd.so.3.0.0 libomxr_mc_divxd.so.3 + ln -s libomxr_mc_divxd.so.3 libomxr_mc_divxd.so + + ln -s libuvcs_dvxd.so.3.0.0 libuvcs_dvxd.so.3 + ln -s libuvcs_dvxd.so.3 libuvcs_dvxd.so + fi + + if [ "X${USE_RVD_OMX}" = "X1" ]; then + ln -s libomxr_mc_rlvd.so.3.0.0 libomxr_mc_rlvd.so.3 + ln -s libomxr_mc_rlvd.so.3 libomxr_mc_rlvd.so + + ln -s libuvcs_rlvd.so.3.0.0 libuvcs_rlvd.so.3 + ln -s libuvcs_rlvd.so.3 libuvcs_rlvd.so + fi +} + +do_install_audio_middleware() { + cd ${D}/${libdir} + + if [ "X${USE_AACLC_MDW}" = "X1" ]; then + install -m 755 ${WORKDIR}/${AAC_MIDDLEWARE_SRC}/${baselib}/libAACDLA_L.so.3.0 \ + ${D}/${libdir} + install -m 644 ${WORKDIR}/${AAC_MIDDLEWARE_SRC}/include/*.h ${D}/${includedir} + + ln -s libAACDLA_L.so.3.0 libAACDLA_L.so.3 + ln -s libAACDLA_L.so.3 libAACDLA_L.so + fi + + if [ "X${USE_AACPV2_MDW}" = "X1" ]; then + install -m 755 ${WORKDIR}/${AACPV2_MIDDLEWARE_SRC}/${baselib}/libRSACPDLA_L.so.2.0 \ + ${D}/${libdir} + install -m 644 ${WORKDIR}/${AACPV2_MIDDLEWARE_SRC}/include/*.h ${D}/${includedir} + + ln -s libRSACPDLA_L.so.2.0 libRSACPDLA_L.so.2 + ln -s libRSACPDLA_L.so.2 libRSACPDLA_L.so + fi + + if [ "X${USE_MP3_MDW}" = "X1" ]; then + install -m 755 ${WORKDIR}/${MP3_MIDDLEWARE_SRC}/${baselib}/libMP3DLA_L.so.2.0 \ + ${D}/${libdir} + install -m 644 ${WORKDIR}/${MP3_MIDDLEWARE_SRC}/include/*.h ${D}/${includedir} + + ln -s libMP3DLA_L.so.2.0 libMP3DLA_L.so.2 + ln -s libMP3DLA_L.so.2 libMP3DLA_L.so + fi + + if [ "X${USE_WMA_MDW}" = "X1" ]; then + install -m 755 ${WORKDIR}/${WMA_MIDDLEWARE_SRC}/${baselib}/libWMASTDLA_L.so.2.0 \ + ${D}/${libdir} + install -m 644 ${WORKDIR}/${WMA_MIDDLEWARE_SRC}/include/*.h ${D}/${includedir} + + ln -s libWMASTDLA_L.so.2.0 libWMASTDLA_L.so.2 + ln -s libWMASTDLA_L.so.2 libWMASTDLA_L.so + fi + + if [ "X${USE_DD_MDW}" = "X1" ]; then + install -m 755 ${WORKDIR}/${DD_MIDDLEWARE_SRC}/${baselib}/libRSDACDLA_L.so.2.0 \ + ${D}/${libdir} + install -m 644 ${WORKDIR}/${DD_MIDDLEWARE_SRC}/include/*.h ${D}/${includedir} + + ln -s libRSDACDLA_L.so.2.0 libRSDACDLA_L.so.2 + ln -s libRSDACDLA_L.so.2 libRSDACDLA_L.so + fi + + if [ "X${USE_AACLCE_MDW}" = "X1" ]; then + install -m 755 ${WORKDIR}/${AEAAC_MIDDLEWARE_SRC}/${baselib}/libRSAACELA_L.so.3.0 \ + ${D}/${libdir} + install -m 644 ${WORKDIR}/${AEAAC_MIDDLEWARE_SRC}/include/*.h ${D}/${includedir} + + ln -s libRSAACELA_L.so.3.0 libRSAACELA_L.so.3 + ln -s libRSAACELA_L.so.3 libRSAACELA_L.so + fi +} + +do_install_omx_audio() { + cd ${D}/${libdir} + for omxmc in ${OMX_AUDIO_SRC_LIST} + do + src="${WORKDIR}/${omxmc}/" + install -m 755 ${src}/${baselib}/lib*.so.* ${D}/${libdir} + if [ -d ${src}/include ]; then + install -m 644 ${src}/include/*.h ${D}/${includedir} + fi + install -m 644 ${src}/config/*.txt ${D}/${sysconfdir}/omxr + done + + if [ "X${USE_AUDIO_OMX}" = "X1" ]; then + ln -s libomxr_mc_acmn.so.3.0.0 libomxr_mc_acmn.so.3 + ln -s libomxr_mc_acmn.so.3 libomxr_mc_acmn.so + fi + + if [ "X${USE_AACLCD_OMX}" = "X1" ]; then + ln -s libomxr_mc_aacd.so.3.0.0 libomxr_mc_aacd.so.3 + ln -s libomxr_mc_aacd.so.3 libomxr_mc_aacd.so + fi + + if [ "X${USE_AACPV2D_OMX}" = "X1" ]; then + ln -s libomxr_mc_aapd.so.3.0.0 libomxr_mc_aapd.so.3 + ln -s libomxr_mc_aapd.so.3 libomxr_mc_aapd.so + fi + + if [ "X${USE_MP3D_OMX}" = "X1" ]; then + ln -s libomxr_mc_mp3d.so.3.0.0 libomxr_mc_mp3d.so.3 + ln -s libomxr_mc_mp3d.so.3 libomxr_mc_mp3d.so + fi + + if [ "X${USE_WMAD_OMX}" = "X1" ]; then + ln -s libomxr_mc_wmad.so.3.0.0 libomxr_mc_wmad.so.3 + ln -s libomxr_mc_wmad.so.3 libomxr_mc_wmad.so + fi + + if [ "X${USE_ALACD_OMX}" = "X1" ]; then + ln -s libomxr_mc_alacd.so.3.0.0 libomxr_mc_alacd.so.3 + ln -s libomxr_mc_alacd.so.3 libomxr_mc_alacd.so + fi + + if [ "X${USE_FLACD_OMX}" = "X1" ]; then + ln -s libomxr_mc_flacd.so.3.0.0 libomxr_mc_flacd.so.3 + ln -s libomxr_mc_flacd.so.3 libomxr_mc_flacd.so + fi + + if [ "X${USE_AACLCE_OMX}" = "X1" ]; then + ln -s libomxr_mc_aace.so.3.0.0 libomxr_mc_aace.so.3 + ln -s libomxr_mc_aace.so.3 libomxr_mc_aace.so + fi + + if [ "X${USE_DDD_OMX}" = "X1" ]; then + ln -s libomxr_mc_ddd.so.3.0.0 libomxr_mc_ddd.so.3 + ln -s libomxr_mc_ddd.so.3 libomxr_mc_ddd.so + fi +} + +do_install () { + if [ "X${USE_OMX_COMMON}" = "X1" ]; then + oe_runmake 'DESTDIR=${D}' install + # Info dir listing isn't interesting at this point so remove it if it exists. + if [ -e "${D}/${infodir}/dir" ]; then + rm -f ${D}/${infodir}/dir + fi + fi +} + +do_install_append() { + # Create destination directory + install -d ${D}/${libdir} + install -d ${D}/${includedir} + if [ "X${USE_OMX_COMMON}" = "X1" ]; then + install -d ${D}/${sysconfdir}/omxr + fi + + # Copy omx video library + do_install_omx_video + # Copy audio middleware library + do_install_audio_middleware + # Copy omx audio library + do_install_omx_audio +} + +INSANE_SKIP_${PN} = "dev-so" + +FILES_${PN} += " \ + ${libdir}/*.so \ +" + +FILES_${PN}-dev = " \ + ${includedir} \ + ${libdir}/*.la \ +" + +RDEPENDS_${PN} += "mmngr-user-module vspmif-user-module" +RDEPENDS_${PN} += '${@base_conditional("USE_ALACD_OMX", "1", "libalacdla-l", "", d )}' +RDEPENDS_${PN} += '${@base_conditional("USE_FLACD_OMX", "1", "libflacdla-l", "", d )}' + +# Skip debug strip of do_populate_sysroot() +INHIBIT_SYSROOT_STRIP = "1" + +# Skip debug split and strip of do_package() +INHIBIT_PACKAGE_DEBUG_SPLIT = "1" +INHIBIT_PACKAGE_STRIP = "1" diff --git a/meta-rcar-gen3/recipes-multimedia/open-avb/open-avb_git.bb b/meta-rcar-gen3/recipes-multimedia/open-avb/open-avb_git.bb new file mode 100644 index 0000000..88900b5 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/open-avb/open-avb_git.bb @@ -0,0 +1,66 @@ +DESCRIPTION = "Open AVB - an AVnu sponsored repository for Audio/Video Bridging technology" +HOMEPAGE = "https://github.com/AVnu/Open-AVB" +LICENSE = "BSD & MIT & GPLv2 & LGPLv2" +LIC_FILES_CHKSUM = " \ + file://daemons/LICENSE;md5=81ccd62d4bc28bafc5e1a2576536b927 \ + file://kmod/igb/COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://kmod/igb/LICENSE;md5=e2c0cd0820d168b0b26e19f13df4dc56 \ + file://lib/igb/LICENSE;md5=9bc783ca40be823a8b237df5eed80fc4 \ + file://lib/avtp_pipeline/LICENSE;md5=8f7b370a91d698ed80d2d20e8e01fbb6 \ + file://examples/LICENSE;md5=81ccd62d4bc28bafc5e1a2576536b927 \ + file://examples/gstreamer-avb-plugins/COPYING.LIB;md5=55ca817ccb7d5b5b66355690e9abc605 \ + file://examples/gstreamer-avb-plugins/COPYING.MIT;md5=bba6cdb9c2b03c849ed4975ed9ed90dc \ +" + +DEPENDS = "libpcap" + +PV = "1.1+git${SRCPV}" + +SRCREV = "20731bd82d2b2e59387f7b3a61fc0370c93ec568" +SRC_URI = "git://github.com/AVnu/Open-AVB.git;branch=open-avb-next" + +S = "${WORKDIR}/git" + +EXTRA_OEMAKE = "'CC=${CC}' 'CXX=${CXX}'" + +do_compile() { + oe_runmake daemons_all +} + +do_install() { + install -d ${D}/${bindir} + install -m 755 daemons/maap/linux/maap_daemon ${D}/${bindir} + install -m 755 daemons/mrpd/mrpd daemons/mrpd/mrpctl ${D}/${bindir} + install -m 755 daemons/gptp/linux/build/obj/daemon_cl ${D}/${bindir} +} + +PACKAGES =+ " \ + ${PN}-gptp \ + ${PN}-mrpd \ + ${PN}-maap \ +" + +ALLOW_EMPTY_${PN} = "1" + +FILES_${PN}-gptp = " \ + ${bindir}/daemon_cl \ +" + +FILES_${PN}-mrpd = " \ + ${bindir}/mrpd \ + ${bindir}/mrpctl \ +" + +FILES_${PN}-maap = " \ + ${bindir}/maap_daemon \ +" + +RDEPENDS_${PN} = " \ + ${PN}-gptp \ + ${PN}-mrpd \ + ${PN}-maap \ +" + +RDEPENDS_${PN}-maap = " \ + libpcap \ +" diff --git a/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-gstreamer1.0-plugins.bb b/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-gstreamer1.0-plugins.bb new file mode 100644 index 0000000..4f76373 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-gstreamer1.0-plugins.bb @@ -0,0 +1,85 @@ +SUMMARY = "GStreamer 1.0 package groups" +LICENSE = "MIT" + +require include/omx-control.inc + +DEPENDS = "gstreamer1.0 gstreamer1.0-plugins-base gstreamer1.0-plugins-good" +DEPENDS += "gstreamer1.0-plugins-bad" +DEPENDS += "gstreamer1.0-plugins-ugly" +DEPENDS += "${@base_conditional("USE_OMX_COMMON", "1", "gstreamer1.0-omx", "", d)}" + +LIC_FILES_CHKSUM = " \ + file://${COREBASE}/LICENSE;md5=4d92cd373abda3937c2bc47fbc49d690 \ + file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420" + +PR = "r0" + +inherit packagegroup + +PACKAGES = " \ + packagegroup-gstreamer1.0-plugins \ + packagegroup-gstreamer1.0-plugins-base \ + packagegroup-gstreamer1.0-plugins-audio \ + packagegroup-gstreamer1.0-plugins-video \ + ${@base_conditional("USE_OMX_COMMON", "1", "packagegroup-gstreamer1.0-omx", "", d)} \ + packagegroup-gstreamer1.0-plugins-debug \ +" + +RDEPENDS_packagegroup-gstreamer1.0-plugins = " \ + packagegroup-gstreamer1.0-plugins-base \ + packagegroup-gstreamer1.0-plugins-audio \ + packagegroup-gstreamer1.0-plugins-video \ + ${@base_conditional("USE_OMX_COMMON", "1", "packagegroup-gstreamer1.0-omx", "", d)} \ + packagegroup-gstreamer1.0-plugins-debug \ +" + +RDEPENDS_packagegroup-gstreamer1.0-plugins-base = " \ + gstreamer1.0-meta-base \ + gstreamer1.0-plugins-base-typefindfunctions \ + gstreamer1.0-plugins-good-id3demux \ + gstreamer1.0-plugins-good-autodetect \ + ${@base_conditional("USE_OMX_COMMON", "1", "gstreamer1.0-plugin-vspfilter", "", d)} \ +" + +RDEPENDS_packagegroup-gstreamer1.0-plugins-audio = " \ + gstreamer1.0-meta-audio \ + gstreamer1.0-plugins-good-audioparsers \ + gstreamer1.0-plugins-base-audiotestsrc \ + gstreamer1.0-plugins-base-audioconvert \ + gstreamer1.0-plugins-base-audioresample \ + gstreamer1.0-plugins-base-alsa \ + gstreamer1.0-plugins-base-ogg \ + gstreamer1.0-plugins-base-vorbis \ +" + +RDEPENDS_packagegroup-gstreamer1.0-plugins-video = " \ + gstreamer1.0-meta-video \ + gstreamer1.0-plugins-base-videotestsrc \ + gstreamer1.0-plugins-base-videoconvert \ + gstreamer1.0-plugins-base-playback \ + gstreamer1.0-plugins-base-videoscale \ + gstreamer1.0-plugins-base-videorate \ + gstreamer1.0-plugins-good-matroska \ + gstreamer1.0-plugins-good-isomp4 \ + gstreamer1.0-plugins-good-avi \ + gstreamer1.0-plugins-good-videofilter \ + gstreamer1.0-plugins-good-videomixer \ + gstreamer1.0-plugins-good-videocrop \ + gstreamer1.0-plugins-good-video4linux2 \ + gstreamer1.0-plugins-good-jpeg \ + ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', \ + 'gstreamer1.0-plugins-bad-waylandsink', '', d)} \ + gstreamer1.0-plugins-bad-videoparsersbad \ + gstreamer1.0-plugins-bad-mpegtsdemux \ + gstreamer1.0-plugins-bad-jpegformat \ + gstreamer1.0-plugins-ugly-asf \ + gstreamer1.0-libav \ +" + +RDEPENDS_packagegroup-gstreamer1.0-omx = " \ + ${@base_conditional("USE_OMX_COMMON", "1", "gstreamer1.0-omx", "", d)} \ +" + +RDEPENDS_packagegroup-gstreamer1.0-plugins-debug = " \ + gstreamer1.0-meta-debug \ +" diff --git a/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-multimedia-kernel.bb b/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-multimedia-kernel.bb new file mode 100644 index 0000000..8d62972 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-multimedia-kernel.bb @@ -0,0 +1,31 @@ +SUMMARY = "Multimedia kernel modules package groups" +LICENSE = "GPLv2 & MIT" + +require include/omx-control.inc + +DEPENDS = "kernel-module-mmngr kernel-module-mmngrbuf \ + kernel-module-vspm kernel-module-vspmif \ + kernel-module-vsp2driver \ +" + +DEPENDS += '${@base_conditional("USE_VIDEO_OMX", "1", "kernel-module-uvcs-drv", "", d )}' + +PR = "r0" + +inherit packagegroup + +PACKAGES = " \ + packagegroup-multimedia-kernel-modules \ +" + +RDEPENDS_packagegroup-multimedia-kernel-modules = " \ + kernel-module-mmngr \ + kernel-module-mmngrbuf \ + kernel-module-vspm \ + kernel-module-vspmif \ + kernel-module-vsp2driver \ +" + +RDEPENDS_packagegroup-multimedia-kernel-modules += " \ + ${@base_conditional("USE_VIDEO_OMX", "1", "kernel-module-uvcs-drv", "", d )} \ +" diff --git a/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-multimedia-libs.bb b/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-multimedia-libs.bb new file mode 100644 index 0000000..323f6ae --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-multimedia-libs.bb @@ -0,0 +1,20 @@ +SUMMARY = "Multimedia user libraries modules package groups" +LICENSE = "MIT" + +DEPENDS = "mmngr-user-module mmngrbuf-user-module \ + vspmif-user-module libalacdla-l libflacdla-l \ +" + +PR = "r0" + +inherit packagegroup + +PACKAGES = " \ + packagegroup-multimedia-libs \ +" + +RDEPENDS_packagegroup-multimedia-libs = " \ + mmngr-user-module mmngrbuf-user-module \ + vspmif-user-module \ + libalacdla-l libflacdla-l \ +" diff --git a/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif-tp-user-module.bb b/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif-tp-user-module.bb new file mode 100644 index 0000000..fb41431 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif-tp-user-module.bb @@ -0,0 +1,46 @@ +DESCRIPTION = "VSP Manager Interface test app for R-Car Gen3" + +require vspmif.inc + +DEPENDS = "vspmif-user-module mmngr-user-module" +PN = "vspmif-tp-user-module" +PR = "r0" + +S = "${WORKDIR}/git" +VSPMIF_TP_DIR = "vspm_if-tp-user/files/vspm_if" + +# Get Wordsize of test app and change their names later to avoid override +WS_aarch64 = "" +WS_virtclass-multilib-lib32 = "32" + +do_compile() { + cd ${S}/${VSPMIF_TP_DIR} + make all +} + +do_install() { + # Create destination folder + install -d ${D}/usr/local/bin/ + + # Copy user test program + if [ X${WS} = "X32" ]; then + install -m 755 ${S}/${VSPMIF_TP_DIR}/vspm_tp ${D}/usr/local/bin/vspm_tp32 + install -m 755 ${S}/${VSPMIF_TP_DIR}/fdpm_tp ${D}/usr/local/bin/fdpm_tp32 + else + install -m 755 ${S}/${VSPMIF_TP_DIR}/vspm_tp ${D}/usr/local/bin/ + install -m 755 ${S}/${VSPMIF_TP_DIR}/fdpm_tp ${D}/usr/local/bin/ + fi +} + +PACKAGES = "\ + ${PN} \ + ${PN}-dbg \ +" +FILES_${PN} = " \ + ${@base_conditional('WS', '32', '/usr/local/bin/vspm_tp32 /usr/local/bin/fdpm_tp32', \ + '/usr/local/bin/vspm_tp /usr/local/bin/fdpm_tp', d)}" + +FILES_${PN}-dbg = " \ + /usr/local/bin/.debug/*" + +RPROVIDES_${PN} += "vspmif-tp-user-module" diff --git a/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif-user-module.bb b/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif-user-module.bb new file mode 100644 index 0000000..3e47d1f --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif-user-module.bb @@ -0,0 +1,49 @@ +DESCRIPTION = "VSP Manager Interface library for R-Car Gen3" + +require vspmif.inc + +DEPENDS = "kernel-module-vspmif mmngr-user-module" +PN = "vspmif-user-module" +PR = "r0" + +S = "${WORKDIR}/git" +VSPMIF_LIB_DIR = "vspm_if-module/files/vspm_if" + +EXTRA_OEMAKE = "ARCH=${TARGET_ARCH}" + +includedir = "/usr/local/include" + +do_compile() { + export VSPM_LEGACY_IF="1" + + # Build shared library + cd ${S}/${VSPMIF_LIB_DIR}/if + rm -rf ${S}/${VSPMIF_LIB_DIR}/if/libvspm.so* + oe_runmake +} + +do_install() { + # Create destination folders + install -d ${D}/${libdir} + install -d ${D}/${includedir} + + # Copy shared library + install -m 755 ${S}/${VSPMIF_LIB_DIR}/if/libvspm.so* ${D}/${libdir}/ + cd ${D}/${libdir}/ + ln -sf libvspm.so.1.0.0 libvspm.so.1 + ln -sf libvspm.so.1 libvspm.so + + # Copy shared header files + install -m 644 ${S}/${VSPMIF_LIB_DIR}/include/vspm_public.h ${D}/${includedir}/ + install -m 644 ${S}/${VSPMIF_LIB_DIR}/include/fdpm_api.h ${D}/${includedir}/ +} + +PACKAGES = "\ + ${PN} \ + ${PN}-dev \ + ${PN}-dbg \ +" + +RPROVIDES_${PN} += "vspmif-user-module" +INSANE_SKIP_${PN} += "libdir" +INSANE_SKIP_${PN}-dev += "libdir" diff --git a/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif.inc b/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif.inc new file mode 100644 index 0000000..29096b5 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif.inc @@ -0,0 +1,15 @@ +LICENSE = "MIT" +LIC_FILES_CHKSUM = " \ + file://COPYING.MIT;md5=30a99e0d36a3da1f5cf93c070ad7888a \ +" + +require include/rcar-gen3-modules-common.inc + +VSPMIF_LIB_URL = "git://github.com/renesas-rcar/vspmif_lib.git" +BRANCH = "rcar_gen3" +SRCREV = "24e0703eea77bfa3f6b7681dbaaa848d0e5416ce" + +SRC_URI = "${VSPMIF_LIB_URL};branch=${BRANCH}" + +# This module is machine specific. +PACKAGE_ARCH = "${MACHINE_ARCH}" diff --git a/meta-rcar-gen3/recipes-multimedia/webp/libwebp/disabled_arm_neon.diff b/meta-rcar-gen3/recipes-multimedia/webp/libwebp/disabled_arm_neon.diff new file mode 100644 index 0000000..80b1811 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/webp/libwebp/disabled_arm_neon.diff @@ -0,0 +1,12 @@ +diff --git a/src/dsp/dsp.h b/src/dsp/dsp.h +index 95f1ce0..fc20ffe 100644 +--- a/src/dsp/dsp.h ++++ b/src/dsp/dsp.h +@@ -73,7 +73,6 @@ extern "C" { + // inline assembly would need to be modified for use with Native Client. + #if (defined(__ARM_NEON__) || defined(WEBP_ANDROID_NEON) || \ + defined(__aarch64__)) && !defined(__native_client__) +-#define WEBP_USE_NEON + #endif + + #if defined(_MSC_VER) && _MSC_VER >= 1700 && defined(_M_ARM) diff --git a/meta-rcar-gen3/recipes-multimedia/webp/libwebp_%.bbappend b/meta-rcar-gen3/recipes-multimedia/webp/libwebp_%.bbappend new file mode 100644 index 0000000..e9469ed --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/webp/libwebp_%.bbappend @@ -0,0 +1,5 @@ +FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:" + +# Add W/A patch for linaro gcc. +# This patch disabled neon. (undefined #WEBP_USE_NEON) +SRC_URI_append = " file://disabled_arm_neon.diff" -- cgit 1.2.3-korg