From 3613b2780a6b5d5d70ea6802be5060a8214cbdb5 Mon Sep 17 00:00:00 2001 From: Takamitsu Honda Date: Fri, 27 Jan 2017 11:47:06 +0900 Subject: First commit. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Renesas BSP v3.5.1 (kernel v4.9 stable) [Environment] poky: yocto-2.1.2 (cca8dd15c8096626052f6d8d25ff1e9a606104a3) meta-openembedded: 55c8a76da5dc099a7bc3838495c672140cedb78e meta-linaro: 2f51d38048599d9878f149d6d15539fb97603f8f [Information] - U-boot: Changed load address from H'49000000 to H'50000000 - XDG_RUNTIME_DIR has been changed from "/run/user/root" to "/run/user/0" - Change location of include directory, which stores common user header files, to $(INCSHARED) - In BSP Only, core-image-weston is not supported even though local-wayland.conf is provided. - Please set Salvator-x SW7 Pin-1. In after Yocto BSP v2.12.0, it is 　necessary to enable BKUP_TRG signal for Suspend to RAM. - The dtb filename was changed in R-Car H3. Only "Image-r8a7795-es1-salvator-x.dtb" is supported in this version. Please use "Image-r8a7795-es1-salvator-x.dtb" It supports R-Car H3 WS1.0 and WS1.1. - Please update your local.conf and bblayers.conf corresponding to Yocto v2.16.0 package. You can refer to meta-rcargen3/docs/sample/conf/ for updated contents. - You have to re-compile out-of-recipe software like user application by v2.16.0 SDK toolchains. - In some boards, the resuming from System Suspend to RAM may cause unstable operation or failed to resume. Signed-off-by: Takamitsu Honda --- README | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 README (limited to 'README') diff --git a/README b/README new file mode 100644 index 0000000..c073969 --- /dev/null +++ b/README @@ -0,0 +1,25 @@ +OpenEmbedded/Yocto BSP layer for Renesas Electronics's SoCs +========== +This layer provides support for Renesas Electronics's platforms for use with +OpenEmbedded and/or Yocto. + +Layer maintainer: Takamitsu Honda + +Supported Boards/Machines +========================= + +In addition, this also provides layer that provides support board that is used +SoCs that Renesas build. Layer and board that supports following: + + * meta-rcar-gen3 + - Renesas Electronics Corporation. Salvator-X (R8A7795/R8A7796) + - Renesas Electronics Corporation. R-Car Starter Kit premier(H3ULCB) (R8A7795) + - Renesas Electronics Corporation. R-Car Starter Kit pro(M3ULCB) (R8A7796) + +Please see README in the layer directory about the description of the board. + +Original BSP image +========================= +The meta-renesas layer provides original BSP image. The following + * core-image-x11 (H3ULCB, M3ULCB) + * core-image-weston -- cgit 1.2.3-korg