From e69877feb2d62e73850b60e4f75265de948f99fd Mon Sep 17 00:00:00 2001 From: Vladimir Barinov Date: Fri, 14 Jul 2017 18:10:52 +0300 Subject: Pack patches: put all ADAS boards patches on one --- ...rm64-dts-r8a7795-h3ulcb-kf-add-ADAS-board.patch | 2137 -------------------- 1 file changed, 2137 deletions(-) delete mode 100644 meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0041-arm64-dts-r8a7795-h3ulcb-kf-add-ADAS-board.patch (limited to 'meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0041-arm64-dts-r8a7795-h3ulcb-kf-add-ADAS-board.patch') diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0041-arm64-dts-r8a7795-h3ulcb-kf-add-ADAS-board.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0041-arm64-dts-r8a7795-h3ulcb-kf-add-ADAS-board.patch deleted file mode 100644 index 1a50c81..0000000 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0041-arm64-dts-r8a7795-h3ulcb-kf-add-ADAS-board.patch +++ /dev/null @@ -1,2137 +0,0 @@ -From f1f043eab3dd06552b3600af1caf50e535f766f1 Mon Sep 17 00:00:00 2001 -From: Vladimir Barinov -Date: Wed, 4 Jan 2017 10:37:23 +0300 -Subject: [PATCH] arm64: dts: r8a7795-h3ulcb-kf: add ADAS board - -Kingfisher board on R8A7795 SoC - -Signed-off-by: Vladimir Barinov ---- - arch/arm64/boot/dts/renesas/Makefile | 1 + - .../boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts | 443 ++++++ - arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts | 1651 ++++++++++++++++++++ - 3 files changed, 2095 insertions(+) - create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts - create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts - -diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile -index d163df7..86a08db 100644 ---- a/arch/arm64/boot/dts/renesas/Makefile -+++ b/arch/arm64/boot/dts/renesas/Makefile -@@ -15,6 +15,7 @@ dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb r8a7796-m3ulcb-kf-v1.dtb - dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x-view.dtb - dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-view.dtb - dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-had-alfa.dtb r8a7795-h3ulcb-had-beta.dtb -+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb r8a7795-h3ulcb-kf-v1.dtb - - always := $(dtb-y) - clean-files := *.dtb -diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts -new file mode 100644 -index 0000000..4b10d31 ---- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts -@@ -0,0 +1,443 @@ -+/* -+ * Device Tree Source for the H3ULCB Kingfisher V1 board -+ * -+ * Copyright (C) 2017 Renesas Electronics Corp. -+ * Copyright (C) 2017 Cogent Embedded, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public License -+ * version 2. This program is licensed "as is" without any warranty of any -+ * kind, whether express or implied. -+ */ -+ -+#include "r8a7795-h3ulcb-kf.dts" -+ -+/ { -+ model = "Renesas H3ULCB Kingfisher V1 board based on r8a7795"; -+ -+ aliases { -+ serial1 = &hscif0; -+ serial2 = &hscif1; -+ serial3 = &scif1; -+ }; -+ -+ wlan_en: regulator@4 { -+ compatible = "regulator-fixed"; -+ regulator-name = "wlan-en-regulator"; -+ -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ gpio = <&gpio_ext_74 4 GPIO_ACTIVE_HIGH>; -+ enable-active-high; -+ }; -+ -+ codec_en_reg: regulator@6 { -+ compatible = "regulator-fixed"; -+ regulator-name = "codec-en-regulator"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ gpio = <&gpio_ext_74 15 0>; -+ -+ /* delay - CHECK */ -+ startup-delay-us = <70000>; -+ enable-active-high; -+ }; -+ -+ amp_en_reg: regulator@7 { -+ compatible = "regulator-fixed"; -+ regulator-name = "amp-en-regulator"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ gpio = <&gpio_ext_74 0 0>; -+ -+ startup-delay-us = <0>; -+ enable-active-high; -+ }; -+ -+ /delete-node/regulator@8; -+ -+ sdio_switch: regulator@9 { -+ compatible = "regulator-fixed"; -+ regulator-name = "wifi_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio_ext_74 5 0>; -+ enable-active-low; -+ regulator-always-on; -+ }; -+ -+ /delete-node/regulator@10; -+ -+ radio_switch: regulator@11 { -+ compatible = "regulator-fixed"; -+ regulator-name = "radio_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio_ext_74 13 GPIO_ACTIVE_HIGH>; -+ enable-active-high; -+ regulator-always-on; -+ }; -+ -+ kim { -+ compatible = "kim"; -+ nshutdown_gpio = <343>; /* gpio_ext_74 pin 3 */ -+ /* serial1 */ -+ dev_name = "/dev/ttySC1"; -+ flow_cntrl = <1>; -+ /* int div 8 hscif@26.6666656MHz */ -+ baud_rate = <3333332>; -+ }; -+ -+ hdmi-out { -+ compatible = "hdmi-connector"; -+ type = "a"; -+ -+ port { -+ hdmi_con: endpoint { -+ remote-endpoint = <&adv7513_out>; -+ }; -+ }; -+ }; -+}; -+ -+&pfc { -+ /delete-node/hscif4; -+ -+ scif1_pins: scif1 { -+ groups = "scif1_data_b"; -+ function = "scif1"; -+ }; -+ -+ hscif0_pins: hscif0 { -+ groups = "hscif0_data", "hscif0_ctrl"; -+ function = "hscif0"; -+ }; -+ -+ hscif1_pins: hscif1 { -+ groups = "hscif1_data_a", "hscif1_ctrl_a"; -+ function = "hscif1"; -+ }; -+ -+ du_pins: du { -+ groups = "du_rgb888", "du_sync", "du_clk_out_0", "du_disp"; -+ function = "du"; -+ }; -+}; -+ -+&du { -+ pinctrl-0 = <&du_pins>; -+ pinctrl-names = "default"; -+ -+ ports { -+ port@0 { -+ endpoint { -+ remote-endpoint = <&adv7513_in>; -+ }; -+ }; -+ port@1 { -+ endpoint { -+ remote-endpoint = <&rcar_dw_hdmi0_in>; -+ }; -+ }; -+ }; -+}; -+ -+&gpio0 { -+ /delete-node/video_a_irq; -+ /delete-node/video_b_irq; -+ /delete-node/gpioext_2_20_irq; -+}; -+ -+&gpio1 { -+ /delete-node/gpioext_2_21_irq; -+ /delete-node/wifi_irq; -+}; -+ -+&gpio2 { -+ bl_pwm { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "BL PWM 100%"; -+ }; -+}; -+ -+&gpio5 { -+ /delete-node/touch_irq; -+ /delete-node/bt_strap; -+ -+ /* V1 has h/w bug with swapped RTS and CTS on BT interface */ -+ /* Ignore these pins */ -+ hscif0_cts { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "hscif0 CTS"; -+ }; -+ -+ hscif0_rts { -+ gpio-hog; -+ gpios = <16 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "hscif0 RTS"; -+ }; -+}; -+ -+&gpio7 { -+ /delete-node/gpioext_2_21_irq; -+}; -+ -+&scif1 { -+ pinctrl-0 = <&scif1_pins>; -+ pinctrl-names = "default"; -+ -+ status = "okay"; -+}; -+ -+&hscif0 { -+ pinctrl-0 = <&hscif0_pins>; -+ pinctrl-names = "default"; -+ ctsrts; -+ -+ status = "okay"; -+}; -+ -+&hscif1 { -+ pinctrl-0 = <&hscif1_pins>; -+ pinctrl-names = "default"; -+ -+ status = "okay"; -+}; -+ -+&hscif4 { -+ /delete-property/pinctrl-0; -+ /delete-property/pinctrl-names; -+ -+ status = "disabled"; -+}; -+ -+&i2c2 { -+ /delete-node/pca9535@20; -+ /delete-node/pca9535@21; -+ -+ gpio_ext_74: pca9539@74 { -+ compatible = "nxp,pca9539"; -+ reg = <0x74>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio6>; -+ interrupts = <8 IRQ_TYPE_EDGE_FALLING>; -+ -+ hub_pwen { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "HUB pwen"; -+ }; -+ hub_rst { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "HUB rst"; -+ }; -+ otg_offvbus { -+ gpio-hog; -+ gpios = <8 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "OTG off VBUSn"; -+ }; -+ otg_extlpn { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "OTG EXTLPn"; -+ }; -+ otg_stat1 { -+ gpio-hog; -+ gpios = <10 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "OTG Stat1"; -+ }; -+ otg_stat2 { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "OTG Stat2"; -+ }; -+ }; -+ -+ gpio_ext_75: pca9539@75 { -+ compatible = "nxp,pca9539"; -+ reg = <0x75>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio6>; -+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>; -+ -+ gps_rst { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "GPS rst"; -+ }; -+ fpdl_shdn { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "FPDLink shdn"; -+ }; -+ }; -+}; -+ -+&i2cswitch2 { -+ reg = <0x71>; -+ reset-gpios= <&gpio5 3 GPIO_ACTIVE_LOW>; -+ -+ i2c@4 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <4>; -+ -+ hdmi@3d { -+ compatible = "adi,adv7511w"; -+ reg = <0x3d>; -+ interrupt-parent = <&gpio2>; -+ interrupts = <0 IRQ_TYPE_EDGE_BOTH>; -+ pd-gpios = <&gpio_ext_75 5 GPIO_ACTIVE_LOW>; -+ -+ adi,input-depth = <8>; -+ adi,input-colorspace = "rgb"; -+ adi,input-clock = "1x"; -+ adi,input-style = <1>; -+ adi,input-justification = "evenly"; -+ adi,clock-delay = <1200>; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ reg = <0>; -+ adv7513_in: endpoint { -+ remote-endpoint = <&du_out_rgb>; -+ }; -+ }; -+ -+ port@1 { -+ reg = <1>; -+ adv7513_out: endpoint { -+ remote-endpoint = <&hdmi_con>; -+ }; -+ }; -+ }; -+ }; -+ }; -+}; -+ -+&i2c4 { -+ /delete-node/pca9535@21; -+ -+ gpio_ext_76: pca9539@76 { -+ compatible = "nxp,pca9539"; -+ reg = <0x76>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio7>; -+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>; -+ -+ port_b_a0 { -+ gpio-hog; -+ gpios = <0 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-B A0"; -+ }; -+ port_b_a1 { -+ gpio-hog; -+ gpios = <1 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B A1"; -+ }; -+ port_a_a0 { -+ gpio-hog; -+ gpios = <2 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-A A0"; -+ }; -+ port_a_a1 { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A A1"; -+ }; -+ /* pin 12 - CAM_CLK */ -+ rpi_cam_io_1 { -+ gpio-hog; -+ gpios = <10 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "RaspB_IO1"; -+ }; -+ /* pin 11 - CAM_GPIO - assume pwdn */ -+ rpi_cam_io_0 { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "RaspB_IO0"; -+ }; -+ /* 0 - FPDLink output, 1 - LVDS output */ -+ lvds_vs_fpdl { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "LVDS switch"; -+ }; -+ }; -+ -+ gpio_ext_77: pca9539@77 { -+ compatible = "nxp,pca9539"; -+ reg = <0x77>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio5>; -+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>; -+ -+ mpcie_wake { -+ gpio-hog; -+ gpios = <0 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "mPCIe WAKE#"; -+ }; -+ mpcie_wdisable { -+ gpio-hog; -+ gpios = <1 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "mPCIe W_DISABLE"; -+ }; -+ mpcie_clreq { -+ gpio-hog; -+ gpios = <2 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "mPCIe CLKREQ#"; -+ }; -+ mpcie_ovc { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "mPCIe OVC"; -+ }; -+ }; -+}; -+ -+&i2cswitch4 { -+ reg = <0x71>; -+ reset-gpios= <&gpio3 15 GPIO_ACTIVE_LOW>; -+}; -+ -+&wlcore { -+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>; -+}; -diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts -new file mode 100644 -index 0000000..2c50230 ---- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts -@@ -0,0 +1,1651 @@ -+/* -+ * Device Tree Source for the H3ULCB Kingfisher board on r8a7795 -+ * -+ * Copyright (C) 2017 Renesas Electronics Corp. -+ * Copyright (C) 2017 Cogent Embedded, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public License -+ * version 2. This program is licensed "as is" without any warranty of any -+ * kind, whether express or implied. -+ */ -+ -+#include "r8a7795-h3ulcb.dts" -+ -+/ { -+ model = "Renesas H3ULCB Kingfisher board based on r8a7795"; -+ -+ aliases { -+ serial1 = &hscif4; -+ }; -+ -+ snd_clk: snd_clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <24576000>; -+ clock-output-names = "scki"; -+ }; -+ -+ wlan_en: regulator@4 { -+ compatible = "regulator-fixed"; -+ regulator-name = "wlan-en-regulator"; -+ -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ gpio = <&gpio_ext_20 4 GPIO_ACTIVE_HIGH>; -+ enable-active-high; -+ }; -+ -+ vcc_sdhi3: regulator@41 { -+ compatible = "regulator-fixed"; -+ -+ regulator-name = "SDHI3 Vcc"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ -+ vccq_sdhi3: regulator@5 { -+ compatible = "regulator-fixed"; -+ -+ regulator-name = "SDHI3 VccQ"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ }; -+ -+ codec_en_reg: regulator@6 { -+ compatible = "regulator-fixed"; -+ regulator-name = "codec-en-regulator"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ gpio = <&gpio_ext_20 15 0>; -+ -+ /* delay - CHECK */ -+ startup-delay-us = <70000>; -+ enable-active-high; -+ }; -+ -+ amp_en_reg: regulator@7 { -+ compatible = "regulator-fixed"; -+ regulator-name = "amp-en-regulator"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ gpio = <&gpio_ext_20 0 0>; -+ -+ startup-delay-us = <0>; -+ enable-active-high; -+ }; -+ -+ lvds_switch: regulator@8 { -+ compatible = "regulator-fixed"; -+ regulator-name = "lvds_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio1 24 0>; -+ enable-active-high; -+ regulator-always-on; -+ }; -+ -+ sdio_switch: regulator@9 { -+ compatible = "regulator-fixed"; -+ regulator-name = "wifi_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio_ext_20 5 0>; -+ enable-active-low; -+ regulator-always-on; -+ }; -+ -+ sound_switch: regulator@10 { -+ compatible = "regulator-fixed"; -+ regulator-name = "pcm3168a_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio_ext_21 5 0>; -+ enable-active-low; -+ regulator-always-on; -+ }; -+ -+ radio_switch: regulator@11 { -+ compatible = "regulator-fixed"; -+ regulator-name = "radio_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio_ext_20 13 GPIO_ACTIVE_HIGH>; -+ enable-active-high; -+ regulator-always-on; -+ }; -+ -+ kim { -+ compatible = "kim"; -+ nshutdown_gpio = <343>; /* pca9535@i2c2.0x20 pin 3 */ -+ /* serial1 */ -+ dev_name = "/dev/ttySC1"; -+ flow_cntrl = <1>; -+ /* int div 8 hscif@26.6666656MHz */ -+ baud_rate = <3333332>; -+ }; -+ -+ btwilink { -+ compatible = "btwilink"; -+ }; -+ -+ sound_ext: sound@0 { -+ pinctrl-0 = <&sound_0_pins>; -+ pinctrl-names = "default"; -+ compatible = "simple-audio-card"; -+ -+ simple-audio-card,format = "left_j"; -+ simple-audio-card,name = "pcm3168a"; -+ -+ simple-audio-card,bitclock-master = <&sound_ext_master>; -+ simple-audio-card,frame-master = <&sound_ext_master>; -+ sound_ext_master: simple-audio-card,cpu@0 { -+ sound-dai = <&rcar_sound 0>; -+ dai-tdm-slot-num = <8>; -+ dai-tdm-slot-width = <32>; -+ }; -+ -+ simple-audio-card,codec@0 { -+ sound-dai = <&pcm3168a>; -+ dai-tdm-slot-num = <8>; -+ dai-tdm-slot-width = <32>; -+ system-clock-frequency = <24576000>; -+ }; -+ }; -+ -+ /delete-node/sound; -+ -+ rsnd_ak4613: sound@1 { -+ pinctrl-0 = <&sound_1_pins>; -+ pinctrl-names = "default"; -+ compatible = "simple-audio-card"; -+ -+ simple-audio-card,format = "left_j"; -+ simple-audio-card,name = "ak4613"; -+ -+ simple-audio-card,bitclock-master = <&sndcpu>; -+ simple-audio-card,frame-master = <&sndcpu>; -+ -+ sndcpu: simple-audio-card,cpu@1 { -+ sound-dai = <&rcar_sound 1>; -+ }; -+ -+ sndcodec: simple-audio-card,codec@1 { -+ sound-dai = <&ak4613>; -+ }; -+ }; -+ -+ sound_radio: sound@2 { -+ pinctrl-0 = <&sound_2_pins>; -+ pinctrl-names = "default"; -+ compatible = "simple-audio-card"; -+ -+ simple-audio-card,format = "i2s"; -+ simple-audio-card,name = "radio"; -+ -+ simple-audio-card,bitclock-master = <&sound_radio_master>; -+ simple-audio-card,frame-master = <&sound_radio_master>; -+ simple-audio-card,cpu@2 { -+ sound-dai = <&rcar_sound 2>; -+ }; -+ -+ sound_radio_master: simple-audio-card,codec@2 { -+ sound-dai = <&radio>; -+ system-clock-frequency = <12288000>; -+ }; -+ }; -+ -+ lvds-encoder { -+ compatible = "thine,thc63lvdm83d"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ port@0 { -+ reg = <0>; -+ lvds_enc_in: endpoint { -+ remote-endpoint = <&du_out_lvds0>; -+ }; -+ }; -+ port@1 { -+ reg = <1>; -+ lvds_enc_out: endpoint { -+ remote-endpoint = <&lvds_in>; -+ }; -+ }; -+ }; -+ }; -+ -+ lvds { -+ compatible = "lvds-connector"; -+ -+ width-mm = <210>; -+ height-mm = <158>; -+ -+ panel-timing { -+ /* 1280x800 @60Hz */ -+ clock-frequency = <65000000>; -+ hactive = <1280>; -+ vactive = <800>; -+ hsync-len = <40>; -+ hfront-porch = <80>; -+ hback-porch = <40>; -+ vfront-porch = <14>; -+ vback-porch = <14>; -+ vsync-len = <4>; -+ }; -+ -+ port { -+ lvds_in: endpoint { -+ remote-endpoint = <&lvds_enc_out>; -+ }; -+ }; -+ }; -+ -+ radio: si468x@0 { -+ compatible = "si,si468x-pcm"; -+ status = "okay"; -+ -+ #sound-dai-cells = <0>; -+ }; -+}; -+ -+&pfc { -+ hscif4_pins: hscif4 { -+ groups = "hscif4_data_a", "hscif4_ctrl"; -+ function = "hscif4"; -+ }; -+ -+ sdhi3_pins_3v3: sd3_3v3 { -+ groups = "sdhi3_data4", "sdhi3_ctrl"; -+ function = "sdhi3"; -+ power-source = <3300>; -+ }; -+ -+ sound_0_pins: sound0 { -+ groups = "ssi78_ctrl", "ssi7_data", "ssi8_data"; -+ function = "ssi"; -+ }; -+ -+ sound_1_pins: sound1 { -+ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; -+ function = "ssi"; -+ }; -+ -+ sound_2_pins: sound2 { -+ groups = "ssi6_ctrl", "ssi6_data"; -+ function = "ssi"; -+ }; -+ -+ usb0_pins: usb0 { -+ groups = "usb0"; -+ function = "usb0"; -+ }; -+ -+ can0_pins: can0 { -+ groups = "can0_data_a"; -+ function = "can0"; -+ }; -+ -+ can1_pins: can1 { -+ groups = "can1_data"; -+ function = "can1"; -+ }; -+ -+ canfd0_pins: canfd0 { -+ groups = "canfd0_data_a"; -+ function = "canfd0"; -+ }; -+ -+ canfd1_pins: canfd1 { -+ groups = "canfd1_data"; -+ function = "canfd1"; -+ }; -+}; -+ -+&gpio0 { -+ video_a_irq { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-A irq"; -+ }; -+ -+ video_b_irq { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-B irq"; -+ }; -+ -+ gpioext_2_20_irq { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "0x20@i2c2 irq"; -+ }; -+}; -+ -+&gpio1 { -+ gpioext_2_21_irq { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "0x21@i2c2 irq"; -+ }; -+ -+ wifi_irq { -+ gpio-hog; -+ gpios = <25 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "wifi irq"; -+ }; -+}; -+ -+&gpio5 { -+ touch_irq { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "touch irq"; -+ }; -+ -+ /* From TI forum */ -+ /* BT_AUD_OUT should be pulled low when WL_EN is activated. */ -+ /* in case it isn't, wilink8 ends up in one of the test modes that introduces various issues */ -+ bt_strap { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "BT strap pin"; -+ }; -+}; -+ -+&gpio7 { -+ gpioext_2_21_irq { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "0x21@i2c4 irq"; -+ }; -+}; -+ -+&hscif4 { -+ pinctrl-0 = <&hscif4_pins>; -+ pinctrl-names = "default"; -+ ctsrts; -+ -+ status = "okay"; -+}; -+ -+&i2c2 { -+ clock-frequency = <400000>; -+ -+ gpio_ext_20: pca9535@20 { -+ compatible = "nxp,pca9535"; -+ reg = <0x20>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio0>; -+ interrupts = <15 IRQ_TYPE_EDGE_FALLING>; -+ }; -+ -+ gpio_ext_21: pca9535@21 { -+ compatible = "nxp,pca9535"; -+ reg = <0x21>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio1>; -+ interrupts = <15 IRQ_TYPE_EDGE_FALLING>; -+ }; -+ -+ i2cswitch2: pca9548@74 { -+ compatible = "nxp,pca9548"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x74>; -+ reset-gpios = <&gpio6 5 GPIO_ACTIVE_LOW>; -+ -+ i2c@0 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0>; -+ /* BCM node(s) */ -+ }; -+ -+ i2c@1 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <1>; -+ /* USB3.0 HUB node(s) */ -+ }; -+ -+ i2c@2 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <2>; -+ /* Power amp node(s) */ -+ }; -+ -+ i2c@3 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <3>; -+ /* Radio node(s) */ -+ }; -+ -+ i2c@4 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <4>; -+ /* A2B node(s) */ -+ }; -+ -+ i2c@5 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <5>; -+ /* PCIe node(s) */ -+ }; -+ -+ i2c@6 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <6>; -+ /* LVDS display node(s) */ -+ -+ polytouch: edt-ft5x06@38 { -+ compatible = "edt,edt-ft5x06"; -+ reg = <0x38>; -+ interrupt-parent = <&gpio5>; -+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>; -+ }; -+ }; -+ -+ i2c@7 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <7>; -+ /* Audio, GPS and Gyro node(s) */ -+ -+ pcm3168a: audio-codec@44 { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm3168a"; -+ reg = <0x44>; -+ clocks = <&snd_clk>; -+ clock-names = "scki"; -+ tdm; -+ VDD1-supply = <&codec_en_reg>; -+ VDD2-supply = <&codec_en_reg>; -+ VCCAD1-supply = <&codec_en_reg>; -+ VCCAD2-supply = <&codec_en_reg>; -+ VCCDA1-supply = <&_en_reg>; -+ VCCDA2-supply = <&_en_reg>; -+ }; -+ -+ lsm9ds0_acc_mag@1d { -+ compatible = "st,lsm9ds0_acc_mag"; -+ reg = <0x1d>; -+ }; -+ -+ lsm9ds0_gyr@6b { -+ compatible = "st,lsm9ds0-gyro"; -+ reg = <0x6b>; -+ }; -+ -+ /* GPS@ 0x42 */ -+ }; -+ }; -+}; -+ -+&i2c4 { -+ gpio_ext_22: pca9535@21 { -+ compatible = "nxp,pca9535"; -+ reg = <0x22>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio7>; -+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>; -+ -+ /* pin 12 - CAM_CLK */ -+ rpi_cam_io_1 { -+ gpio-hog; -+ gpios = <10 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "RaspB_IO1"; -+ }; -+ /* pin 11 - CAM_GPIO - assume pwdn */ -+ rpi_cam_io_0 { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "RaspB_IO0"; -+ }; -+ }; -+ -+ i2cswitch4: pca9548@74 { -+ compatible = "nxp,pca9548"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x74>; -+ reset-gpios= <&gpio6 21 GPIO_ACTIVE_LOW>; -+ -+ i2c@0 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0>; -+ /* SAM node(s) */ -+ }; -+ -+ i2c@1 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <1>; -+ /* Slot A (CN10) */ -+ -+ ov106xx@0 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x60>; -+ -+ port@0 { -+ ov106xx_in0: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin0ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep0>; -+ }; -+ ov106xx_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; -+ }; -+ ov106xx_ti954_des0ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep0>; -+ }; -+ }; -+ }; -+ -+ ov106xx@1 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x61>; -+ -+ port@0 { -+ ov106xx_in1: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin1ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep1>; -+ }; -+ ov106xx_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; -+ }; -+ ov106xx_ti954_des0ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep1>; -+ }; -+ }; -+ }; -+ -+ ov106xx@2 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x62>; -+ -+ port@0 { -+ ov106xx_in2: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin2ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep2>; -+ }; -+ ov106xx_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; -+ }; -+ }; -+ }; -+ -+ ov106xx@3 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x63>; -+ -+ port@0 { -+ ov106xx_in3: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin3ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep3>; -+ }; -+ ov106xx_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB964 @ 0x3a */ -+ ti964-ti9x3@0 { -+ compatible = "ti,ti964-ti9x3"; -+ reg = <0x3a>; -+ gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; -+ ti,sensor_delay = <350>; -+ ti,links = <4>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "coax"; -+ -+ port@0 { -+ ti964_des0ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ ti964_des0ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ ti964_des0ep2: endpoint@2 { -+ ti9x3-addr = <0x0e>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ ti964_des0ep3: endpoint@3 { -+ ti9x3-addr = <0x0f>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ ti964_csi0ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB954 @ 0x38 */ -+ ti954-ti9x3@0 { -+ compatible = "ti,ti954-ti9x3"; -+ reg = <0x38>; -+ gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; -+ ti,sensor_delay = <350>; -+ ti,links = <2>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "coax"; -+ -+ port@0 { -+ ti954_des0ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ ti954_des0ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ }; -+ port@1 { -+ ti954_csi0ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ -+ /* MAX9286 @ 0x2a */ -+ max9286-max9271@0 { -+ compatible = "maxim,max9286-max9271"; -+ reg = <0x2a>; -+ maxim,sensor_delay = <350>; -+ maxim,links = <4>; -+ maxim,lanes = <4>; -+ maxim,resetb-gpio = <1>; -+ maxim,fsync-mode = "automatic"; -+ maxim,timeout = <100>; -+ -+ port@0 { -+ max9286_des0ep0: endpoint@0 { -+ max9271-addr = <0x50>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ max9286_des0ep1: endpoint@1 { -+ max9271-addr = <0x51>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ max9286_des0ep2: endpoint@2 { -+ max9271-addr = <0x52>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ max9286_des0ep3: endpoint@3 { -+ max9271-addr = <0x53>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ max9286_csi0ep0: endpoint { -+ csi-rate = <700>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ }; -+ -+ i2c@2 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <2>; -+ /* Slot B (CN11) */ -+ -+ ov106xx@4 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x64>; -+ -+ port@0 { -+ ov106xx_in4: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin4ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep0>; -+ }; -+ ov106xx_ti964_des1ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep0>; -+ }; -+ ov106xx_ti954_des1ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep0>; -+ }; -+ }; -+ }; -+ -+ ov106xx@5 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x65>; -+ -+ port@0 { -+ ov106xx_in5: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin5ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep1>; -+ }; -+ ov106xx_ti964_des1ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep1>; -+ }; -+ ov106xx_ti954_des1ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep1>; -+ }; -+ }; -+ }; -+ -+ ov106xx@6 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x66>; -+ -+ port@0 { -+ ov106xx_in6: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin6ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep2>; -+ }; -+ ov106xx_ti964_des1ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep2>; -+ }; -+ }; -+ }; -+ -+ ov106xx@7 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x67>; -+ -+ port@0 { -+ ov106xx_in7: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin7ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep3>; -+ }; -+ ov106xx_ti964_des1ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep3>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB964 @ 0x3a */ -+ ti964-ti9x3@1 { -+ compatible = "ti,ti964-ti9x3"; -+ reg = <0x3a>; -+ gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>; -+ ti,sensor_delay = <350>; -+ ti,links = <4>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "coax"; -+ -+ port@0 { -+ ti964_des1ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in4>; -+ }; -+ ti964_des1ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in5>; -+ }; -+ ti964_des1ep2: endpoint@2 { -+ ti9x3-addr = <0x0e>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in6>; -+ }; -+ ti964_des1ep3: endpoint@3 { -+ ti9x3-addr = <0x0f>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in7>; -+ }; -+ }; -+ port@1 { -+ ti964_csi2ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB954 @ 0x38 */ -+ ti954-ti9x3@1 { -+ compatible = "ti,ti954-ti9x3"; -+ reg = <0x38>; -+ gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>; -+ ti,sensor_delay = <350>; -+ ti,links = <2>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "coax"; -+ -+ port@0 { -+ ti954_des1ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in4>; -+ }; -+ ti954_des1ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in5>; -+ }; -+ }; -+ port@1 { -+ ti954_csi2ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ }; -+ -+ /* MAX9286 @ 0x2a */ -+ max9286-max9271@1 { -+ compatible = "maxim,max9286-max9271"; -+ reg = <0x2a>; -+ maxim,sensor_delay = <350>; -+ maxim,links = <4>; -+ maxim,lanes = <4>; -+ maxim,resetb-gpio = <1>; -+ maxim,fsync-mode = "automatic"; -+ maxim,timeout = <100>; -+ -+ port@0 { -+ max9286_des1ep0: endpoint@0 { -+ max9271-addr = <0x50>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in4>; -+ }; -+ max9286_des1ep1: endpoint@1 { -+ max9271-addr = <0x51>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in5>; -+ }; -+ max9286_des1ep2: endpoint@2 { -+ max9271-addr = <0x52>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in6>; -+ }; -+ max9286_des1ep3: endpoint@3 { -+ max9271-addr = <0x53>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in7>; -+ }; -+ }; -+ port@1 { -+ max9286_csi2ep0: endpoint { -+ csi-rate = <700>; -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ }; -+ }; -+ -+ i2c@6 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <6>; -+ /* Slot B (CN11) */ -+ -+ video_b_ext0: pca9535@27 { -+ compatible = "nxp,pca9535"; -+ reg = <0x27>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ video_b_des_cfg1 { -+ gpio-hog; -+ gpios = <5 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B cfg1"; -+ }; -+ video_b_des_cfg0 { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B cfg0"; -+ }; -+ video_b_pwr_shdn { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR_SHDN"; -+ }; -+ video_b_cam_pwr0 { -+ gpio-hog; -+ gpios = <12 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR0"; -+ }; -+ video_b_cam_pwr1 { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR1"; -+ }; -+ video_b_cam_pwr2 { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR2"; -+ }; -+ video_b_cam_pwr3 { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR3"; -+ }; -+ video_b_des_shdn { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B DES_SHDN"; -+ }; -+ video_b_des_led { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-B led"; -+ }; -+ }; -+ -+ video_b_ext1: max7325@5c { -+ compatible = "maxim,max7325"; -+ reg = <0x5c>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ video_b_des_cfg2 { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-B cfg2"; -+ }; -+ video_b_des_cfg1 { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-B cfg1"; -+ }; -+ video_b_des_cfg0 { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-B cfg0"; -+ }; -+ video_b_pwr_shdn { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR_SHDN"; -+ }; -+ video_b_cam_pwr0 { -+ gpio-hog; -+ gpios = <8 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR0"; -+ }; -+ video_b_cam_pwr1 { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR1"; -+ }; -+ video_b_cam_pwr3 { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR3"; -+ }; -+ }; -+ }; -+ -+ i2c@7 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <7>; -+ /* Slot A (CN10) */ -+ -+ video_a_ext0: pca9535@26 { -+ compatible = "nxp,pca9535"; -+ reg = <0x26>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ video_a_des_cfg1 { -+ gpio-hog; -+ gpios = <5 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A cfg1"; -+ }; -+ video_a_des_cfg0 { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A cfg0"; -+ }; -+ video_a_pwr_shdn { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR_SHDN"; -+ }; -+ video_a_cam_pwr0 { -+ gpio-hog; -+ gpios = <12 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR0"; -+ }; -+ video_a_cam_pwr1 { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR1"; -+ }; -+ video_a_cam_pwr2 { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR2"; -+ }; -+ video_a_cam_pwr3 { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR3"; -+ }; -+ video_a_des_shdn { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A DES_SHDN"; -+ }; -+ video_a_des_led { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-A led"; -+ }; -+ }; -+ -+ video_a_ext1: max7325@5c { -+ compatible = "maxim,max7325"; -+ reg = <0x5c>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ video_a_des_cfg2 { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-A cfg2"; -+ }; -+ video_a_des_cfg1 { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-A cfg1"; -+ }; -+ video_a_des_cfg0 { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-A cfg0"; -+ }; -+ video_a_pwr_shdn { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR_SHDN"; -+ }; -+ video_a_cam_pwr0 { -+ gpio-hog; -+ gpios = <8 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR0"; -+ }; -+ video_a_cam_pwr1 { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR1"; -+ }; -+ video_a_cam_pwr3 { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR3"; -+ }; -+ }; -+ }; -+ }; -+}; -+ -+&pcie_bus_clk { -+ clock-frequency = <100000000>; -+ status = "okay"; -+}; -+ -+&pciec0 { -+ status = "okay"; -+}; -+ -+&pciec1 { -+ status = "okay"; -+}; -+ -+&vin0 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin0ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ }; -+ port@1 { -+ csi0ep0: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin0_max9286_des0ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep0>; -+ }; -+ vin0_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; -+ }; -+ vin0_ti954_des0ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep0>; -+ }; -+ }; -+ }; -+}; -+ -+&vin1 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin1ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <1>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ }; -+ port@1 { -+ csi0ep1: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin1_max9286_des0ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep1>; -+ }; -+ vin1_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; -+ }; -+ vin1_ti954_des0ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep1>; -+ }; -+ }; -+ }; -+}; -+ -+&vin2 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin2ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <2>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ }; -+ port@1 { -+ csi0ep2: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin2_max9286_des0ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep2>; -+ }; -+ vin2_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; -+ }; -+ }; -+ }; -+}; -+ -+&vin3 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin3ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <3>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ csi0ep3: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin3_max9286_des0ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep3>; -+ }; -+ vin3_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; -+ }; -+ }; -+ }; -+}; -+ -+&vin4 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin4ep0: endpoint { -+ csi,select = "csi41"; -+ virtual,channel = <0>; -+ remote-endpoint = <&ov106xx_in4>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep0: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin4_max9286_des1ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep0>; -+ }; -+ vin4_ti964_des1ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep0>; -+ }; -+ vin4_ti954_des1ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep0>; -+ }; -+ }; -+ }; -+}; -+ -+&vin5 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin5ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <1>; -+ remote-endpoint = <&ov106xx_in5>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep1: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin5_max9286_des1ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep1>; -+ }; -+ vin5_ti964_des1ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep1>; -+ }; -+ vin5_ti954_des1ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep1>; -+ }; -+ }; -+ }; -+}; -+ -+&vin6 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin6ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <2>; -+ remote-endpoint = <&ov106xx_in6>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep2: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin6_max9286_des1ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep2>; -+ }; -+ vin6_ti964_des1ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep2>; -+ }; -+ }; -+ }; -+}; -+ -+&vin7 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin7ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <3>; -+ remote-endpoint = <&ov106xx_in7>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep3: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin7_max9286_des1ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep3>; -+ }; -+ vin7_ti964_des1ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep3>; -+ }; -+ }; -+ }; -+}; -+ -+&csi2_40 { -+ status = "okay"; -+ -+ virtual,channel { -+ csi2_vc0 { -+ data,type = "ycbcr422"; -+ receive,vc = <0>; -+ }; -+ csi2_vc1 { -+ data,type = "ycbcr422"; -+ receive,vc = <1>; -+ }; -+ csi2_vc2 { -+ data,type = "ycbcr422"; -+ receive,vc = <2>; -+ }; -+ csi2_vc3 { -+ data,type = "ycbcr422"; -+ receive,vc = <3>; -+ }; -+ }; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ csi2_40_ep: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ csi-rate = <300>; -+ }; -+ }; -+}; -+ -+&csi2_41 { -+ status = "okay"; -+ -+ virtual,channel { -+ csi2_vc0 { -+ data,type = "ycbcr422"; -+ receive,vc = <0>; -+ }; -+ csi2_vc1 { -+ data,type = "ycbcr422"; -+ receive,vc = <1>; -+ }; -+ csi2_vc2 { -+ data,type = "ycbcr422"; -+ receive,vc = <2>; -+ }; -+ csi2_vc3 { -+ data,type = "ycbcr422"; -+ receive,vc = <3>; -+ }; -+ }; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ csi2_41_ep: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ csi-rate = <300>; -+ }; -+ }; -+}; -+ -+&rcar_sound { -+ pinctrl-0 = <&sound_clk_pins>; -+ -+ /* Multi DAI */ -+ #sound-dai-cells = <1>; -+ -+ rcar_sound,dai { -+ dai0 { -+ playback = <&ssi7>; -+ capture = <&ssi8>; -+ }; -+ -+ dai1 { -+ playback = <&ssi0 &src0 &dvc0>; -+ capture = <&ssi1 &src1 &dvc1>; -+ }; -+ -+ dai2 { -+ capture = <&ssi6>; -+ }; -+ }; -+}; -+ -+&sdhi3 { -+ pinctrl-0 = <&sdhi3_pins_3v3>; -+ pinctrl-names = "default"; -+ -+ vmmc-supply = <&wlan_en>; -+ vqmmc-supply = <&vccq_sdhi3>; -+ keep-power-in-suspend; -+ enable-sdio-wakeup; -+ bus-width = <4>; -+ no-1-8-v; -+ non-removable; -+ cap-power-off-card; -+ max-frequency = <26000000>; -+ status = "okay"; -+ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ wlcore: wlcore@2 { -+ compatible = "ti,wl1837"; -+ reg = <2>; -+ interrupt-parent = <&gpio1>; -+ interrupts = <25 IRQ_TYPE_EDGE_RISING>; -+ }; -+}; -+ -+&usb2_phy0 { -+ pinctrl-0 = <&usb0_pins>; -+ pinctrl-names = "default"; -+ -+ status = "okay"; -+}; -+ -+&ehci0 { -+ status = "okay"; -+}; -+ -+&ohci0 { -+ status = "okay"; -+}; -+ -+&xhci0 { -+ status = "okay"; -+}; -+ -+&msiof1 { -+ status = "disabled"; -+}; -+ -+&can0 { -+ pinctrl-0 = <&can0_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+ -+ renesas,can-clock-select = <0x0>; -+}; -+ -+&can1 { -+ pinctrl-0 = <&can1_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+ -+ renesas,can-clock-select = <0x0>; -+}; -+ -+&canfd { -+ pinctrl-0 = <&canfd0_pins &canfd1_pins>; -+ pinctrl-names = "default"; -+ status = "disabled"; -+ -+ channel0 { -+ status = "okay"; -+ }; -+ -+ channel1 { -+ status = "okay"; -+ }; -+}; -+ -+/* uncomment to enable CN48 on VIN4 */ -+//#include "ulcb-kf-rpi.dtsi" -+/* uncomment to enable CN47: SD on SDHI3 */ -+//#include "ulcb-kf-sd3.dtsi" --- -1.9.1 - -- cgit 1.2.3-korg