meta-rcar-gen3 ============== This layer provides that evaluation board is mounted ARM SoCs of Renesas Electronics, called the R-Car Generation 3. Currently, this supports board and the SoCs of the following: - Board: Salvator-X / SoC: R8A7795 (R-Car H3), R8A7796 (R-Car M3), R8A77965 (R-Car M3N) - Board: R-Car Starter Kit premier(H3ULCB) / SoC: R8A7795 (R-Car H3) - Board: R-Car Starter Kit pro(M3ULCB) / SoC: R8A7796 (R-Car M3) - Board: Ebisu / SoC: R8A77990 (R-Car E3) Patches ======= Please submit any patches for this layer to: takamitsu.honda.pv@renesas.com Please see the MAINTAINERS file for more details. Dependencies ============ This layer depends on: URI: git://git.yoctoproject.org/poky layers: meta, meta-yocto, meta-yocto-bsp branch: rocko URI: git://github.com/renesas-rcar/meta-renesas layers: meta-rcar-gen3 branch: rocko URI: git://git.linaro.org/openembedded/meta-linaro.git layers: meta-optee branch: rocko URI: git://git.openembedded.org/meta-openembedded layers: meta-oe branch: rocko Build Instructions ================== The following instructions require a Poky installation (or equivalent). Initialize a build using the 'oe-init-build-env' script in Poky. e.g.: $ source poky/oe-init-build-env After that, initialized configure bblayers.conf by adding meta-rcar-gen3 layer. e.g.: BBLAYERS ?= " \ /poky/meta \ /poky/meta-yocto \ /poky/meta-yocto-bsp \ /meta-renesas/meta-rcar-gen3 \ /meta-linaro/meta-optee \ /meta-openembedded/meta-oe \ " To build a specific target BSP, configure the associated machine in local.conf: MACHINE ??= "" Select the SOC For H3: r8a7795 SOC_FAMILY = "r8a7795" For M3: r8a7796 SOC_FAMILY = "r8a7796" For M3N: r8a77965 SOC_FAMILY = "r8a77965" For E3: r8a77990 SOC_FAMILY = "r8a77990" Already added in machine config: ebisu.conf Configure for systemd init in local.conf: DISTRO_FEATURES_append = " systemd" VIRTUAL-RUNTIME_init_manager = "systemd" Configure for ivi-shell and ivi-extension DISTRO_FEATURES_append = " ivi-shell" Configure for USB 3.0 MACHINE_FEATURES_append = " usb3" Enable tuning support for Capacity Aware migration Strategy (CAS) MACHINE_FEATURES_append = " cas" Build the target file system image using bitbake: $ bitbake core-image-minimal After completing the images for the target machine will be available in the output directory 'tmp/deploy/images/'. Images generated: * Image (generic Linux Kernel binary image file) * Image-.dtb (DTB for target machine) * core-image-minimal-.tar.bz2 (rootfs tar+bzip2) * core-image-minimal-.ext4 (rootfs ext4 format) Build Instructions for SDK ========================== This may be changed in the near feature. These instructions are tentative. Should define the staticdev in SDK image feature for installing the static libs to SDK in local.conf. SDKIMAGE_FEATURES_append = " staticdev-pkgs" Use bitbake -c populate_sdk for generating the toolchain SDK: For 64-bit target SDK (aarch64): $ bitbake core-image-minimal -c populate_sdk The SDK can be found in the output directory 'tmp/deploy/sdk' * poky-glibc-x86_64-core-image-minimal-aarch64-toolchain-x.x.sh Usage of toolchain SDK: Install the SDK to the default: /opt/poky/x.x For 64-bit target SDK: $ sh poky-glibc-x86_64-core-image-minimal-aarch64-toolchain-x.x.sh For 64-bit application use environment script in /opt/poky/x.x $ source /opt/poky/x.x/environment-setup-aarch64-poky-linux ULCB Information ================ Refer to the following for more information of ULCB: http://elinux.org/R-Car The information on building and running Yocto on R-Car Generation 3 ========================= Refer to the following for more information: https://elinux.org/R-Car/Boards/Yocto-Gen3