diff options
| -rw-r--r-- | docs/2-Installation.md | 17 |
1 files changed, 11 insertions, 6 deletions
diff --git a/docs/2-Installation.md b/docs/2-Installation.md index 8e3b6f2c..d4071a43 100644 --- a/docs/2-Installation.md +++ b/docs/2-Installation.md @@ -8,12 +8,13 @@ It will produce a _configuration-generated.cpp_ file to paste in the source, _sr * Make sure you already set up the AGL SDK using the following [guide](http://docs.iot.bzh/docs/getting_started/en/dev/reference/setup-sdk-environment.html). -To get the correct SDK version installed, you **must** prepare your environment with the **chinook-next** version. To do so, run the following command in your docker image: +To get the correct SDK version installed, you **must** prepare your environment with the **chinook-next** version. To do so, run the following command in your docker image in the step 4 in place of `... [ prepare build environment ] ...`: -> **NOTE** This command assume that proprietary graphic drivers for Renesas Porter board are located in `/home/devel/share/proprietary-renesas-rcar` directory. +> **NOTE** These commands assume that proprietary graphic drivers for Renesas Porter board are located in `/home/devel/share/proprietary-renesas-rcar` directory. ```bash $ prepare_meta -f chinook-next -o /xdt -l /home/devel/mirror -p /home/devel/share/proprietary-renesas-rcar/ -t porter -e wipeconfig -e rm_work +$ /xdt/build/agl-init-build-env ``` * An [USB CAN adapter](http://shop.8devices.com/usb2can) connected to connector through the [right cable](http://www.mouser.fr/ProductDetail/EasySync/OBD-M-DB9-F-ES/)). @@ -95,7 +96,7 @@ engine.torque > **CAUTION** This chapter has not been tested since we haven't necessary automotive tools for that. -If you use Canoe to store your `gold standard` CAN signal definitions, you may be able to use the OpenXC `xml_to_json.py` script to make your JSON for you. First, export the Canoe .dbc file as XML - you can do this with Vector CANdb++. Next, create a JSON file according to the format defined above, but only define: +If you use CANoe to store your `gold standard` CAN signal definitions, you may be able to use the OpenXC `xml_to_json.py` script to make your JSON for you. First, export the Canoe .dbc file as XML - you can do this with Vector CANdb++. Next, create a JSON file according to the format defined above, but only define: - CAN messages. - Name of CAN signals within messages and their generic_name. @@ -156,7 +157,9 @@ $ git submodule update $ cp $WD/can-config-generator/build/configuration-generated.cpp src/ ``` -With an AGL SDK environment correctly configured and **sourced**, I suggest you to set the TARGET variable in the root CMakeLists.txt file if you have an AGL target already running in your network. +### Installation using *make install* + +With an AGL SDK environment correctly configured and **sourced**, I suggest you to set the TARGET variable in the CMakeLists.txt file located under _src_ directory if you have an AGL target already running in your network. Then you can directly build and install the binding and source directory on your target system. @@ -195,6 +198,8 @@ It's because installation remove the binding before installing it. If it is the first time that you make the installation then you'll have this message in place of _**true**_. +### Installation manually + To install it manually, you need to copy the _low-can-binding.wgt_ file on your target, then from it execute the following commands : On your host, to copy over the network : @@ -203,9 +208,9 @@ On your host, to copy over the network : $ scp low-can-binding.wgt root@<target_IP>:~ ``` -On the target, assuming _**wgt**_ file is in the root home directory : +On the target, assuming _**wgt**_ file is in the root home directory: ```bash -~# afm-util install low-can-binding.wgt +# afm-util install low-can-binding.wgt { "added": "low-can-binding@0.1" } ``` |