From 49fe0eec8f17698fc5f86d0abe01777af1fb2b23 Mon Sep 17 00:00:00 2001 From: Romain Forlot Date: Fri, 14 Apr 2017 13:24:07 +0200 Subject: Change directory architecture to use 2 separated projects. Each projects, binder and generator, has to be compiled separatly. CAN-binder will host high and low level binding CAN-config-generator only the generator used for low level binding. build.sh script just launch both build in their respective dir. Change-Id: Ic77932660fcca507b23a631d4e4e790f608880ae Signed-off-by: Romain Forlot --- README.md | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) (limited to 'README.md') diff --git a/README.md b/README.md index cbe951ba..a608363b 100644 --- a/README.md +++ b/README.md @@ -1,9 +1,23 @@ -# Low level CAN signaling binder +# CAN signaling binder -Low level CAN bus binder, based upon OpenXC vi-firmware project. +CAN bus binder, based upon OpenXC vi-firmware project. + +There are 2 separated projects here, one with the CAN-binder that is installed +on an AGL target and the CAN config generator used to generate a source file for +the low level binding. Full document can be found under `docs` directory. +# Fast build procedure + +Just use build.sh script: + +```bash +./build.sh +``` + +This will build both projects under build directory for each of them. + # Generate documentation ## Prerequisites -- cgit 1.2.3-korg