/* * Copyright (C) 2015, 2016 "IoT.bzh" * Author "Romain Forlot" <romain.forlot@iot.bzh> * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #include <configuration.hpp> #define OBD2_FUNCTIONAL_BROADCAST_ID 0x7df /* * Pre-defined OBD-II PIDs to query for if supported by the vehicle. */ std::vector<obd2_signals_t> OBD2_PIDS = { { 0x04, "obd2.engine.load", 0, 100, POURCENT, 5, false}, { 0x05, "obd2.engine.coolant.temperature", -40, 215, DEGREES_CELSIUS, 1, false}, { 0x0a, "obd2.fuel.pressure", 0, 765, KPA, 1, false}, { 0x0b, "obd2.intake.manifold.pressure", 0, 255, KPA, 1, false}, { 0x0c, "obd2.engine.speed", 0, 16383, RPM, 5, false}, { 0x0d, "obd2.vehicle.speed", 0, 255, KM_H, 5, false}, { 0x0f, "obd2.intake.air.temperature", -40, 215, DEGREES_CELSIUS, 1, false}, { 0x10, "obd2.mass.airflow", 0, 655, GRAMS_SEC, 5, false}, { 0x11, "obd2.throttle.position", 0, 100, POURCENT, 5, false}, { 0x1f, "obd2.running.time", 0, 65535, SECONDS, 1, false}, { 0x2d, "obd2.EGR.error", -100, 99, POURCENT, 0, false}, { 0x2f, "obd2.fuel.level", 0, 100, POURCENT, 1, false}, { 0x33, "obd2.barometric.pressure", 0, 255, KPA, 1, false}, { 0x4c, "obd2.commanded.throttle.position", 0, 100, POURCENT, 1, false}, { 0x52, "obd2.ethanol.fuel.percentage", 0, 100, POURCENT, 1, false}, { 0x5a, "obd2.accelerator.pedal.position", 0, 100, POURCENT, 5, false}, { 0x5b, "obd2.hybrid.battery-pack.remaining.life", 0, 100, POURCENT, 5, false}, { 0x5c, "obd2.engine.oil.temperature",-40, 210, DEGREES_CELSIUS, 1, false}, { 0x63, "obd2.engine.torque", 0, 65535, NM, 1, false} }; std::vector<can_message_set_t> CAN_MESSAGE_SET = { {0, "example_messages", 1, 2, 2, 0, 19}, }; std::vector<std::vector<can_message_definition_t>> CAN_MESSAGES_DEFINTION = { { {0x620, CanMessageFormat::STANDARD, {10, 0, nullptr}, false, (uint8_t)NULL}, {0x442, CanMessageFormat::STANDARD, {10, 0, nullptr}, false, (uint8_t)NULL}, }, }; /** * @brief Dumb SIGNALS array. It is composed by CanMessageSet * SIGNALS[MESSAGE_SET_ID][CanSignal] */ std::vector<std::vector<can_signal_t>> SIGNALS = { { {&(CAN_MESSAGES_DEFINTION[MESSAGE_SET_ID][0]), "can.driver_door.open", 2, 4, 1.000000, 0.000000, 0.000000, 0.000000, {10, 0, nullptr}, false, true, nullptr, 0, false, decoder_t::booleanDecoder, nullptr, false, 0.0}, {&(CAN_MESSAGES_DEFINTION[MESSAGE_SET_ID][1]), "can.driver_door.close", 0, 4, 1.000000, 0.000000, 0.000000, 0.000000, {10, 0, nullptr}, false, true, nullptr, 0, false, decoder_t::booleanDecoder, nullptr, false, 0.0} }, }; configuration_t::configuration_t() : obd2_signals_{OBD2_PIDS}, can_message_set_{CAN_MESSAGE_SET}, can_signals_{SIGNALS}, can_message_definition_{CAN_MESSAGES_DEFINTION}