aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-07-19Try to fix: time out expired immediatelysandbox/jsmoeller/timerfixKazumasa Mitsunari1-3/+3
Bug-AGL: SPEC-1471 Change-Id: I13b3cdc1b0f735588b4f352c6ed1822a5cb966af Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>
2018-07-11Enable scaling to fit various screen resolutionsKazumasa Mitsunari10-22/+220
Since the AGL HomeScreen of CES2018 assumes that the screen resolution is 1080x1920px, the graphics of it partially corrupted with others. To fix this issue, now the AGL window manager automatically scales size according to "scaling" value in setting.json By default(even if "scaling" is not set), this scaling keeps 'fullscreen' aspect rate in area.db("aspect_fit") User can select 3 options. - "aspect_fit" : Scale aspect rate of 'fullscreen' in area.db.(default) - "display_fit": Force to scale to display size. - "none" or others : Set size just as area.db Bug-AGL: SPEC-1568 Bug-AGL: SPEC-1569 Change-Id: Ia08c0ebb2d71ae8f89a90088e181381c3ba3562d Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>
2018-07-10Forbid negative value for area sizeKazumasa Mitsunari2-39/+26
It is not intuitive to set negative value as size. So forbit negative value. Change-Id: I49480653284158b6d1bfcb22a71d9882ed958518 Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>
2018-07-09Rename event names to lower camel caseYuta Doi1-3/+3
Change-Id: I973610e2b47ebd842291d568bd88578150efcef5 Signed-off-by: Yuta Doi <yuta-d@witz-inc.co.jp>
2018-07-09Rename APIsYuta Doi1-4/+4
rename WindowManager APIs as follows: - activateSurface -> activateWindow - deactivateSurface -> deactivateWindow The "surface" means information of display material frame buffer managed by Graphics Subsystem (Weston). And the "window" means the right to draw on display. The "surface" is physical information and used inside WindowManager. So we think it is not good for "surface" to be included in API name. These APIs provide the function which is to activate/deactivate the right to draw for the applications. So we change to "activateWindow/deactivateWindow". We plan to delete the old API by GG. Therefore the applications can use old APIs until GG, but the warning "-Wdeprecated-declarations" is occured when compile. After GG, old APIs can not be used. If use it, the error is occured when compile. Bug-AGL: SPEC-1565 Change-Id: Ic7da4e5ddb759e642a2b60ecf61e327aaf74a699 Signed-off-by: Yuta Doi <yuta-d@witz-inc.co.jp>
2018-07-09Add new layers and rename existing layersYuta Doi2-14/+38
Change-Id: I76f9ffd9acefaa35e2cfd00cc6c23037218fc103 Signed-off-by: Yuta Doi <yuta-d@witz-inc.co.jp>
2018-07-09Add configuration file for each area sizesYuta Doi9-72/+297
Add areas.db which has each area sizes. less-than-0 values refer to (MAX + 1 - $VALUE) and MAX is either screen width or height. layers.json had each area sizes until now, so removed the sizes from it. Change-Id: I5cf283581daaca41e2b9e3ee6e947478bff1189c Signed-off-by: Yuta Doi <yuta-d@witz-inc.co.jp>
2018-07-09Convert the roles from old one to newYuta Doi9-49/+423
Update the role name (drawing_name) and WindowManager converts the role from old one to new. We plan to delete the old roles by GG. Therefore the applications can use old olds until GG, After GG, old roles can not be used. If the applications use it, WindowManager regards the applications as the role "fallback". Therefore the applications may not be displayed in the intended layout. For the role "fallback", please refer to JIRA SPEC-1331. Bug-AGL: SPEC-1566 Change-Id: I6ca703183e3cab72ac460094ef14dc3675a98cb6 Signed-off-by: Yuta Doi <yuta-d@witz-inc.co.jp>
2018-06-28Add signal when the displayed application changedKazumasa Mitsunari2-0/+37
Add new signal "screen_updated" to Window Manager. This is emitted when application size or visibility is changed, the application ids are notified to subscribers. There are some applications such like HomeScreen, which needs the visibility of other applications turns on, so add new event. The key is "ids" and data is application id which is written in config.xml for each application. This signal format is here: ON-EVENT windowmanager/screen_updated: { "event":"windowmanager\/screen_updated", "data":{ "ids":[ "navigation", "hvac" ] }, "jtype":"afb-event" } Bug-AGL: SPEC-1532 Change-Id: I6c1f263be00d4b496e0e0f77dd88b6118489772f Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>
2018-06-27Clean: sort source code according to the order of header fileKazumasa Mitsunari2-334/+339
Sort API order written in source code according to the order in header file to improve readability. Change-Id: I6606590ce2ad9c285b3cfd83dc6c0741890b105f Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>
2018-06-27Fix class name "App" to "WindowManager"Kazumasa Mitsunari5-94/+94
struct App is core class of Window Manager. The name of "struct App" is strange so rename it to WindowManager. Change-Id: Ia5f2e5acbadb8d58fe772aec0cd15a4a2e91369e Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>
2018-06-27Refactor: Integrate rework handles by applicationKazumasa Mitsunari3-367/+828
Integrate rework handles information by application. Window Manager handles request by "task" and block other requests until the task finishes. This is necessary because window mangaer task consists of 2 asyncronous parts, which are checking policy and redraw sync, and ensures the 2 parts should be managed consecutively. Bug-AGL: SPEC-1510 Change-Id: I9a1d5daad5b47dd5e68a437173b3d5f1b3923865 Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>
2018-06-27Rework: Window Manager handles by applicationKazumasa Mitsunari11-3/+1160
To manage role, surface, layer ... and other info more easily, Window Manager handles info by application. WMClient class holds infomation of application. WMRequest class holds the request from application(trigger) and the action list judged by policy manager. The above info is in applist. *applist Hold client list. And hold request list which comes from application to get the right of displaying. *request The request from application and the Action judged from Policy Manager *client Application information which has surface, role and so on. *error Error code and error message. Integration patch is going to be pushed after this commit. Bug-AGL: SPEC-1509 Change-Id: I52b161701e22e316137dc42f073b118d164c1e28 Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>
2018-06-27Add Get/Set area size functionsKazumasa Mitsunari3-0/+62
Add internal functions to get/set area size. Change-Id: I9fef787863bed81fe6e4761c6f387886d7df1455 Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>
2018-06-25Bug Fix: Window Manager doesn't react after killing app processKazumasa Mitsunari3-32/+12
After killing an application which has surfaces, Window Manager releases the information for app. Then, invalid access happens. As a result, Application seems to loose their ability to display. This is a potencial bug caused by upgrades of wayland-ivi-extension, so this problem didn't occur in eel branch. This patch fixes the bug. Bug-AGL: SPEC-1421 Change-Id: If921dd4ea6bd46454356e97e1be7e5c136c7383b Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>
2018-06-25Clean: remove small filesKazumasa Mitsunari6-147/+16
*policy.hpp No affect to Window Manager decision, so remove it. *config.hpp, config.cpp Small function to hold the path information to config file, but no need to hold until the death of process. So move it to stack variable, then remove files. Change-Id: I6c210acc586c7cc048e0b158df5e3a511f927b9d Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>
2018-06-25Clean: remove useless headersKazumasa Mitsunari9-52/+9
* Shorten build time * Remove unnecessary dependencies Change-Id: I960b2a21124cabc62ef73436fb5a7ab5191c4e0d Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>
2018-06-25Fix Client Context of afb-binderKazumasa Mitsunari1-8/+10
* Rename wmClientCtxt to WMClientCtxt * Hold application name and requested role Change-Id: I7d600c66bd905b4847d34049b81aa361dd4fb528 Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>
2018-06-01Remove the unnecessary propertyKazumasa Mitsunari2-284/+0
Window Manager service doesn't need to have an icon, then remove it. Change-Id: I85d6f612dc1a7bdbdff4c67022cd32d85b0da799 Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>
2018-05-31Format source codesKazumasa Mitsunari19-2465/+2907
* Format source codes * Change indent spaces to 4 from 3 * Remove trailing spaces in config.xml Change-Id: I745ba6c7cc4dcf4177add81666351c3c01de7d44 Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>
2018-03-20Update documentKazumasa Mitsunari1-101/+67
* Change version to 0.5 * Remove code generation. It is not used anymore * Fix inconsistent spellings * Add "Fallback" description * Fix dependency package * Add description of requestSurfaceXDG Change-Id: I134c521b0d413780e496e9477c4901431eb72ae5 Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>
2018-03-19Change reply timingKazumasa Mitsunari3-49/+59
Some events were emitted in a function before it replies. This patch changes * The function checks parameter then reply error if it is incorrect. * After checking parameters, the function continues to process. The exeption is the syncronous functions such as requestSurface. Change-Id: I168eba3e2b70d53615a4221bcbbba6bc6096c1db Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>
2018-03-19Send visible event after commit changeKazumasa Mitsunari1-1/+1
Visible event was emitted before commit change of ivi-controller. This patch changes the event emitted after commit change. Bug-AGL: SPEC-1332 Change-Id: Ib8a6d3a513c1fe4a28111b2ad256122289fc5cc0 Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>
2018-03-09Enable fallback, then display applicationsflounder_5.99.1flounder/5.99.15.99.1Kazumasa Mitsunari3-5/+18
This patch enables the app to show if it is not registered in layers.json. The original installed app was not shown because the role of app is not registered in WM as default. [Patch set2] Add the same process into requestSurface for RunXDG Bug-AGL : SPEC-1331 Change-Id: Ie99b971023a95a1924795b1ffc7311a630940b1d Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>
2018-02-09Add APIs which can get information about the display and the surface areaYuta Doi6-22/+280
getDisplayInfo() can get the display information as follows: - width[pixel] - height[pixel] - width[mm] - height[mm] NOTE: It uses wl_output::geometry() for getting physical width[mm] and height[mm] of the display, but the value is different with measured value. value from wl_output::geometry(): width:320 height:520 measured value : width:193 height:343 getAreaInfo() can get the information of area drawn by the application as follows: - x-coordinate - y-coordinate - width - height The details are described in doc/ApplicationGuide.md. Bug-AGL: SPEC-1087 Change-Id: I9e6d64ff04e0845b83c69db374d06af17a6d6b66 Signed-off-by: Yuta Doi <yuta-d@witz-inc.co.jp>
2018-01-24Change the protocol from ivi-controller to ivi-wmYuta Doi14-1582/+1340
This patch is for master branch only. For using wayland-ivi-extension version 2.x, the wayland protocol in WindowManager is changed from ivi-controller to ivi-wm. NOTE: If using this patch, the modification for AGL/meta-agl which described in SPEC-1244 is necessary. Bug-AGL: SPEC-1244 Change-Id: I5489db202dfeec8f4626aee53bd1f86c145b95d9 Signed-off-by: Yuta Doi <yuta-d@witz-inc.co.jp>
2018-01-11Fix screen flickerKazumasa Mitsunari1-2/+0
If the app is on background layer for CES hack such like Navigation, when the user push "Home" shortcut botton quickly many times, the app on background layer appears with flickering. So fix the issue. Bug-AGL: SPEC-1247 Change-Id: I777607a99914f0141886e817cb6a5e486f1105f0 Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>
2017-12-27Merge "Fix build error in gcc 7.2"Jan-Simon Moeller1-1/+0
2017-12-25Enable an application re-launchKazumasa Mitsunari2-1/+56
When an application dies after requestSurface, the application can't be launched because Window Manager doesn't know the application is dead and doesn't clean up its database. In other case, when Mixer app dies due to pulse audio crash just before Window Manager handles surface memory, the connection between weston and Window Manager is dead. So add following * Add context setting with window manager clients. Terminate the context and clean up WM database if a client application is dead. * Add layout_commit() after add surfaces to layer. [PatchSet 2] * Add layout_commit() after add surfaces to layer in api_request_surface Bug-AGL: SPEC-1086 Change-Id: I6ecae2606ac644e49a3383ba849390f8c235f187 Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>
2017-12-22Fix build error in gcc 7.2Changhyeok Bae1-1/+0
error "Never include <bits/signum.h> directly; use <signal.h> instead." Bug-AGL: SPEC-1181 Signed-off-by: Changhyeok Bae <changhyeok.bae@gmail.com>
2017-12-22Enable to show Video and WebBrowserTadao Tanikawa2-1/+3
Adding new applications (Video player and Web browser) to be managed by window manager properly. Releated introducing Video player, old name, 'MediaPlayer' for apps/mediaplayer has been renamed 'Music'. Old name,'MediaPlayer' keeps alive in layers.json for backward compatibility. Change-Id: I2b5e267f4015a4ed128ff5b55ba709faf1914b61 Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
2017-12-21Clean up source codeKazumasa Mitsunari7-455/+87
To reduce the files and redundant code, * Remove afb_binding_api.* files and generate-binding-glue.py. * Merge them into other source codes. Change-Id: Ib61350ee6a42d73efc3fa29fa0c4868145a88e2e Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>
2017-12-19Remove automatic code generationKazumasa Mitsunari3-10/+422
To handle the request from binder(applications) more flexibly, we have to remove automatic code generation. Change-Id: Id14ab749cca68b5aa30376ba3ac543372df87233 Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>
2017-12-19Exclude execusion bitKazumasa Mitsunari1-0/+0
Change-Id: I8eee96305be1c8808442af92b254fce857e3dfd6 Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>
2017-12-14Add background layer for CES DEMOYuta Doi3-1/+67
MediaPlayer and Radio can not sound when their surface have visibility=0. And Navigation can not be displayed correctly when the application is switched from visibility=0 to 1. Because when visibility=0, weston event can not be catched. So when the applications is not displayed, they have visibility=1 and are moved to background layer. Change-Id: Idf236e703a1e74cf564a1b213e6e15fcfa42a29e Signed-off-by: Yuta Doi <yuta-d@witz-inc.co.jp>
2017-12-12Support XDG applicationTadao Tanikawa4-0/+56
To run XDG application on AGL HomeScreen/WindowManager, a new binding API of WindowManager is added. This api is used only by AGL XDG-Launcher and all xdg applications should be packed as wgt compatible to AGL Application framework. Bug-AGL: SPEC-1096 Change-Id: I33dd3b056c736ef374e2251e818541ddd699877b Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
2017-12-11Revert "Add APIs which can get information of display and area"Tadao Tanikawa8-217/+16
This reverts commit 6aaba1066fe89f324d4bae67497f4035fe997d5f. To fix double posts to Gerrit Review and repository directly. Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
2017-12-11Add APIs which can get information of display and areaYuta Doi8-16/+217
getDisplayInfo() can get the display information as follows: - width[pixel] - height[pixel] - width[mm] - height[mm] NOTE: It uses wl_output::geometry() for getting physical width[mm] and height[mm] of the display, but the value is different with measured value. value from wl_output::geometry(): width:320 height:520 measured value : width:193 height:343 getAreaInfo() can get the information of area drawn by the application as follows: - x-coordinate - y-coordinate - width - height The details are described in doc/ApplicationGuide.md. Change-Id: I41eec6251527862ef25d1b84cd37d736d3f9c8aa Signed-off-by: Yuta Doi <yuta-d@witz-inc.co.jp>
2017-11-25Fix the flipped screen problemeel_4.99.3eel/4.99.34.99.3Kazumasa Mitsunari1-2/+4
If transform=flipped-270 is set within weston.ini, the video output is incorrect. Fix the problem. Bug-AGL: SPEC-1115 Change-Id: Idc7117b4b8011e17e888d2237665b485b6ae5621 Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>
2017-11-13Update the debug message macrosYuta Doi1-9/+29
Update the debug message macros to the latest version according to https://gerrit.automotivelinux.org/gerrit/#/c/11767/. Signed-off-by: Yuta Doi <yuta-d@witz-inc.co.jp>
2017-11-10Remove and replace the commentsYuta Doi12-151/+74
Remove the unnecessary comments and replace ascii-art comments with doxygen format. Change-Id: Id1abf56db58070a83f403a1f8280bc9888e7de09 Signed-off-by: Yuta Doi <yuta-d@witz-inc.co.jp>
2017-11-10Add the fail-safe process for the configuration fileYuta Doi2-3/+50
If the configuration file "layers.json" can not be opened, windowmanager uses a default layer configuration. Change-Id: I1b20f385c5e748a90be5e930a1775a6b3a4f39a5 Signed-off-by: Yuta Doi <yuta-d@witz-inc.co.jp>
2017-11-09Fix the error log on windowmanager initializationYuta Doi1-1/+1
Fix the bug which is that windowmanager outputs the error log on the initialization. Bug-AGL: SPEC-925 Change-Id: I87b20cc7840ef7241ca56ecab440f52333b1753c Signed-off-by: Yuta Doi <yuta-d@witz-inc.co.jp>
2017-11-09Update the application guideYuta Doi1-34/+31
- Change according to: - https://gerrit.automotivelinux.org/gerrit/#/c/11523/ - https://gerrit.automotivelinux.org/gerrit/#/c/11747/ - Update to the latest information. - Fix typo. Change-Id: I6ca0afa91de330219c6fba1c70d20a39282701a2 Signed-off-by: Yuta Doi <yuta-d@witz-inc.co.jp>
2017-11-07Merge "Add an another example for layout configuration"Jan-Simon Moeller1-0/+41
2017-11-06Add an another example for layout configurationKazumasa Mitsunari1-0/+41
Add split version configuration. This sample configuration file enables split layout. This sample configuration means "When Navigation app(main_match) is displayed, then HVAC or MediaPlayer app requests activateSurface, Window Manager requests to be half size to HVAC|Mediaplayer and Navigation app". Change-Id: I685d7165fd43c6f4d964dedb9bf9b5f5a38807f8 Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>
2017-11-06Update application guideYuta Doi1-46/+99
Because agl-doc converter doesn't work on current document, some HTML tags was changed. Change-Id: Ie04449e9c7c892cda155c180169b75ea02317741 Signed-off-by: Yuta Doi <yuta-d@witz-inc.co.jp>
2017-11-01Fix copyright to TOYOTAeel_4.99.2eel/4.99.24.99.2Kazumasa Mitsunari20-20/+20
Change-Id: I8ac0463a8efa215477593a96a45f08e38dc46e36 Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>
2017-11-01Change namespace name to generic nameKazumasa Mitsunari8-53/+46
The name of namespace "genivi" was used. This is not generic, so changed it to "compositor". Conflicts: src/app.cpp Change-Id: Ie088e5d404e1981f7bc149abbc20e900bea8ec2d Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>
2017-11-01Add LICENSE.MITKazumasa Mitsunari1-0/+20
Window Manager uses json.hpp licensed with MIT, so we need to add LICENSE file. Change-Id: Id78d482bd2edc20cbbc420d7795d4e7341305c92 Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>