From 427d63c93ca38a7808c3ae8bd6e4b31524944df0 Mon Sep 17 00:00:00 2001 From: Leon Anavi Date: Wed, 5 Feb 2020 15:28:49 +0200 Subject: raspberrypi.md: Replace PI with Pi Replace all "Raspberry PI" with "Raspberry Pi" according to the trademark rules and brand guidelines of the Raspberry Pi Foundation: https://www.raspberrypi.org/trademark-rules/ Bug-AGL: SPEC-3130 Signed-off-by: Leon Anavi --- docs/getting-started/machines/raspberrypi.md | 50 ++++++++++++++-------------- 1 file changed, 25 insertions(+), 25 deletions(-) (limited to 'docs') diff --git a/docs/getting-started/machines/raspberrypi.md b/docs/getting-started/machines/raspberrypi.md index 732d311..c0d7002 100644 --- a/docs/getting-started/machines/raspberrypi.md +++ b/docs/getting-started/machines/raspberrypi.md @@ -1,17 +1,17 @@ -# Building for Raspberry PI 3 or 4 +# Building for Raspberry Pi 3 or 4 The -[Raspberry PI](https://www.raspberrypi.org/help/what-%20is-a-raspberry-pi/) is a small +[Raspberry Pi](https://www.raspberrypi.org/help/what-%20is-a-raspberry-pi/) is a small computer that is ideal for learning computing and computer languages. The AGL Project supports building images for the -[Raspberry PI 3](https://www.raspberrypi.org/products/raspberry-pi-3-model-a-plus/) and the -[Raspberry PI 4](https://www.raspberrypi.org/products/raspberry-pi-4-model-b/) boards. +[Raspberry Pi 3](https://www.raspberrypi.org/products/raspberry-pi-3-model-a-plus/) and the +[Raspberry Pi 4](https://www.raspberrypi.org/products/raspberry-pi-4-model-b/) boards. Each of these boards comes in a variety of models. See the -[Raspberry PI Product Page](https://www.raspberrypi.org/products/) for more information. +[Raspberry Pi Product Page](https://www.raspberrypi.org/products/) for more information. This section describes the steps you need to take to build the -AGL demo image for both the Raspberry PI 3 and 4 boards. +AGL demo image for both the Raspberry Pi 3 and 4 boards. ## 1. Making Sure Your Build Environment is Correct @@ -19,21 +19,21 @@ The "[Initializing Your Build Environment](../image-workflow-initialize-build-environment.html)" section presented generic information for setting up your build environment using the `aglsetup.sh` script. -If you are building the AGL demo image for a Raspberry PI board, you need to specify some +If you are building the AGL demo image for a Raspberry Pi board, you need to specify some specific options when you run the script. Use the following commands to initialize your build environment. In each case, the "-m" option specifies the machine and the list of AGL features used with script are appropriate for development of -the AGL demo image suited for either Raspberry PI 3 or 4: +the AGL demo image suited for either Raspberry Pi 3 or 4: -**Raspberry PI 3**: +**Raspberry Pi 3**: ```bash $ source meta-agl/scripts/aglsetup.sh -m raspberrypi3 agl-demo agl-netboot agl-appfw-smack ``` -**Raspberry PI 4**: +**Raspberry Pi 4**: ```bash $ source meta-agl/scripts/aglsetup.sh -m raspberrypi4 agl-demo agl-netboot agl-appfw-smack @@ -48,7 +48,7 @@ The section highlights some common configurations that are useful when building any AGL image. -For the Raspberry PI platforms, you need to take an additional +For the Raspberry Pi platforms, you need to take an additional configuration step if you want to include any packages under a commercial license. @@ -70,7 +70,7 @@ IMAGE_INSTALL_append = " libomxil" This section shows the `bitbake` command used to build the AGL image. Before running BitBake to start your build, it is good to be reminded that AGL -does provide a pre-built image for developers that want to use the Raspberry PI 3 +does provide a pre-built image for developers that want to use the Raspberry Pi 3 board. You can find this pre-built image on the [AGL Download web site](https://download.automotivelinux.org/AGL/release). @@ -95,21 +95,21 @@ $ bitbake agl-demo-platform ``` By default, the build process puts the resulting image in the Build Directory. -Here is example for the Raspberry PI 4 board: +Here is example for the Raspberry Pi 4 board: ``` /tmp/deploy/images/raspberrypi4/agl-demo-platform-raspberrypi4.wic.xz ``` -If you build for the Raspberry PI 3 board, the location uses "raspberrypi3" in the path. +If you build for the Raspberry Pi 3 board, the location uses "raspberrypi3" in the path. ## 4. Deploying the AGL Demo Image Deploying the AGL demo image consists of copying the image on a MicroSD card, -plugging the card into the Raspberry PI board, and then booting the board. +plugging the card into the Raspberry Pi board, and then booting the board. Follow these steps to copy the image to a MicroSD card and boot -the image on the Raspberry PI 3 or 4 board: +the image on the Raspberry Pi 3 or 4 board: 1. Plug your MicroSD card into your Build Host (i.e. the system that has your build output). @@ -162,8 +162,8 @@ the image on the Raspberry PI 3 or 4 board: 3. Now that you know the device name, unmount the device and use the `xzcat` command to copy the image to the MicroSD card. - **NOTE:** For Raspberry PI 3, the image is at `build/tmp/deploy/images/raspberrypi3/agl-demo-platform-raspberrypi3.wic.xz`. - For Raspberry PI 4, the image is at `build/tmp/deploy/images/raspberrypi4/agl-demo-platform-raspberrypi4.wic.xz`. + **NOTE:** For Raspberry Pi 3, the image is at `build/tmp/deploy/images/raspberrypi3/agl-demo-platform-raspberrypi3.wic.xz`. + For Raspberry Pi 4, the image is at `build/tmp/deploy/images/raspberrypi4/agl-demo-platform-raspberrypi4.wic.xz`. Be sure you are root, provide the actual device name for *sdcard_device_name*, and the actual image name for *image_name*: @@ -174,12 +174,12 @@ the image on the Raspberry PI 3 or 4 board: $ sync ``` -4. Plug your MicroSD card into the Raspberry PI board and boot the device. +4. Plug your MicroSD card into the Raspberry Pi board and boot the device. -## 5. Using the Raspberry PI Touch Display +## 5. Using the Raspberry Pi Touch Display If you have connected the official -[Raspberry PI Touch Display](https://www.raspberrypi.org/products/raspberry-pi-touch-display/), +[Raspberry Pi Touch Display](https://www.raspberrypi.org/products/raspberry-pi-touch-display/), you can configure the display by editing the `weston.ini` file. Plenty of information exists on how to configure and use this touchscreen. @@ -224,9 +224,9 @@ transform=270 ## 6. Debugging -When things go wrong, you can take steps to debug your Raspberry PI. +When things go wrong, you can take steps to debug your Raspberry Pi. For debugging, you need a 3.3 Volt USB Serial cable to fascilitate -communication between your Raspberry PI board and your build host. +communication between your Raspberry Pi board and your build host. A good cable to use is the 3.3V USB-to-Serial cable [Olimex USB-Serial-Cable-F](https://www.olimex.com/Products/Components/Cables/USB-Serial-Cable/USB-Serial-Cable-F/). @@ -243,7 +243,7 @@ You can reference the following diagram for information on the following steps:

1. Connect the Olimex cable to the Universal Asynchronous Receiver-Transmitter - (UART) connection on your Raspberry PI board. + (UART) connection on your Raspberry Pi board. Do not connect the USB side of the cable to your build host at this time. **CAUTION:** No warranty is provided using the following procedure. @@ -261,7 +261,7 @@ You can reference the following diagram for information on the following steps: 5. Plug the USB connector of the cable into your build host's USB port. 6. Use your favorite tool for serial communication between your build host - and your Raspberry PI. + and your Raspberry Pi. For example, if your build host is a native Linux machine (e.g. Ubuntu) you could use `screen` as follows from a terminal on the build host: -- cgit 1.2.3-korg From f8373cea423906f0377bd6d8e3488ec56be0d265 Mon Sep 17 00:00:00 2001 From: Leon Anavi Date: Wed, 5 Feb 2020 15:38:04 +0200 Subject: raspberrypi.md: Add section for SOTA Add new section to describe how to build AGL for Raspberry Pi with enabled software over the air (SOTA) updates. Bug-AGL: SPEC-3130 Signed-off-by: Leon Anavi --- docs/getting-started/machines/raspberrypi.md | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'docs') diff --git a/docs/getting-started/machines/raspberrypi.md b/docs/getting-started/machines/raspberrypi.md index c0d7002..bc58368 100644 --- a/docs/getting-started/machines/raspberrypi.md +++ b/docs/getting-started/machines/raspberrypi.md @@ -268,3 +268,17 @@ You can reference the following diagram for information on the following steps: ```bash $ sudo screen /dev/ttyUSB0 115200 ``` + +## 7. SOTA + +Follow the step below to build AGL for Raspberry Pi with enabled software over +the air (SOTA) updates: + +1. Include **agl-sota** feature. + +2. In **bblayers.conf** replace meta-updater-qemux86-64 with + **meta-updater-raspberrypi**. + +3. In **local.conf** set `SOTA_PACKED_CREDENTIALS` and `OSTREE_BRANCHNAME`. + +More details are available [here](https://docs.ota.here.com/getstarted/dev/raspberry-pi.html). -- cgit 1.2.3-korg