From 5273b3f14ec02a66e191560104709184484c01d4 Mon Sep 17 00:00:00 2001
From: Frederic Marec <frederic.marec@iot.bzh>
Date: Thu, 27 Feb 2020 10:05:57 +0100
Subject: Update Renesas documentation
Add icefish in bsp table
Reformating documentation part
Signed-off-by: Frederic Marec <frederic.marec@iot.bzh>
---
docs/getting-started/machines/renesas.md | 83 ++++++++++++++++++++++++++++++++
1 file changed, 83 insertions(+)
(limited to 'docs')
diff --git a/docs/getting-started/machines/renesas.md b/docs/getting-started/machines/renesas.md
index fac5b93..4c2d219 100644
--- a/docs/getting-started/machines/renesas.md
+++ b/docs/getting-started/machines/renesas.md
@@ -708,6 +708,7 @@ boot device and also to set the screen resolution:
You need to press a key quickly as you have just a few seconds in which to
press a key.
+<<<<<<< HEAD
2. Once the autoboot process is interrupted, use the board's serial console to
enter **printenv** to check if you have correct parameters for booting your board:
@@ -717,6 +718,23 @@ boot device and also to set the screen resolution:
</summary>
<pre>
<code>
+=======
+ <li>Once the autoboot process is interrupted, use the board's serial console to
+<<<<<<< HEAD
+ enter **printenv** to check if you have correct parameters for booting your board:
+<details>
+ <summary>
+ Here is an example using the **h3ulcb** board:
+=======
+ enter <b>printenv</b> to check if you have correct parameters for booting your board:
+<details>
+ <summary>
+ Here is an example using the <b>h3ulcb</b> board:
+>>>>>>> fe7e536... Update Renesas documentation
+ </summary>
+ <pre>
+ <code>
+>>>>>>> 9447a8c... Update Renesas documentation
=> printenv
baudrate=115200
@@ -733,6 +751,7 @@ stdout=serial
ver=U-Boot 2015.04 (Jun 09 2016 - 19:21:52)
Environment size: 648/131068 bytes
+<<<<<<< HEAD
</code>
</pre>
</details>
@@ -742,6 +761,21 @@ Environment size: 648/131068 bytes
</summary>
<pre>
<code>
+=======
+ </code>
+ </pre>
+</details>
+<details>
+ <summary>
+<<<<<<< HEAD
+ Here is a second example using the **m3ulcb** board:
+=======
+ Here is a second example using the <b>m3ulcb</b> board:
+>>>>>>> fe7e536... Update Renesas documentation
+ </summary>
+ <pre>
+ <code>
+>>>>>>> 9447a8c... Update Renesas documentation
=> printenv
baudrate=115200
bootargs=console=ttySC0,115200 root=/dev/mmcblk1p1 rootwait ro rootfstype=ext4
@@ -771,21 +805,33 @@ Environment size: 557/131068 bytes
setenv load_ker ext4load mmc 0:1 0x48080000 /boot/Image
```
+<<<<<<< HEAD
4. Depending on the board type, the BSP version, and the existence of
a Kingfisher board, make sure your ``load_dtb`` is set as follows:
**h3ulcb with BSP version greater than or equal to 2.19**:
+=======
+ <li>Depending on the board type, the BSP version, and the existence of
+ a Kingfisher board, make sure your ``load_dtb`` is set as follows:<br>
+
+ <b>h3ulcb with BSP version greater than or equal to 2.19</b>:
+>>>>>>> 9447a8c... Update Renesas documentation
```
setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/Image-r8a7795-es1-h3ulcb.dtb
```
+<<<<<<< HEAD
**h3ulcb with BSP version less than 2.19**:
+=======
+ <b>h3ulcb with BSP version less than 2.19</b>:
+>>>>>>> 9447a8c... Update Renesas documentation
```
setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/Image-r8a7795-h3ulcb.dtb
```
+<<<<<<< HEAD
**m3ulcb**:
```bash
@@ -811,6 +857,42 @@ Environment size: 557/131068 bytes
```
6. Boot the board:
+=======
+ <b>m3ulcb</b>:
+ <pre>
+ <code>
+ setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/r8a7796-m3ulcb.dtb
+ </code>
+ </pre>
+
+ <b>m3ulcb with a Kingfisher board</b>:
+ <pre>
+ <code>
+ setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/r8a7796-m3ulcb-kf.dtb
+ </code>
+ </pre>
+
+ <b>h3ulcb with a Kingfisher board</b>:
+ <pre>
+ <code>
+ setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/r8a7795-es1-h3ulcb-kf.dtb
+ </code>
+ </pre>
+ </li>
+
+ <li>Save the boot environment:<br>
+ <code>
+ saveenv
+ </code>
+ </li>
+
+ <li>Boot the board:<br>
+ <code>
+ run bootcmd
+ </code>
+ </li>
+</ol>
+>>>>>>> 9447a8c... Update Renesas documentation
```
run bootcmd
@@ -890,3 +972,4 @@ you can determine the board's IP address and log in using `ssh`.
</details>
**NOTE:** More generics troubleshooting can be found here : [Generic issues](../troubleshooting.html)
+ git push --set-upstream origin guppy
\ No newline at end of file
--
cgit