From e28c27dd7e31524a7f767b07d73b95d3f08d9e01 Mon Sep 17 00:00:00 2001
From: Dominig ar Foll <dominig.arfoll@fridu.net>
Date: Wed, 1 Mar 2017 14:47:29 +0100
Subject: Creation of a Trouble shooting page for Intel HW

Signed-off-by: Dominig ar Foll <dominig.arfoll@fridu.net>
---
 getting-started/footers/intel.md | 36 ++++++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 getting-started/footers/intel.md

(limited to 'getting-started/footers/intel.md')

diff --git a/getting-started/footers/intel.md b/getting-started/footers/intel.md
new file mode 100644
index 0000000..1be82ec
--- /dev/null
+++ b/getting-started/footers/intel.md
@@ -0,0 +1,36 @@
+## BIOS update
+Both the Joule and the Minnowboard require a BIOS upgrade. **Don t loose time trying without.**<br>
+https://firmware.intel.com/projects/minnowboard-max<br>
+https://software.intel.com/en-us/flashing-the-bios-on-joule
+
+## Creating a bootable image
+Multiple options are avaiable but dd and tar can very easily let you down due to the requirement to pass SMACK labels, create a proper UEFI configuration and a few other tricks.<br>
+The script [mkefi-agl.sh](https://github.com/dominig/mkefi-agl.sh) has been done to help you.<br>
+The option -h will print the help and the option -v will detailled the operation and ease any debug.<br>
+
+
+## Serial debug Port
+
+Serial debug port ID varies with the HW platform :<br>
+By default AGL build Intel target as a Minnowboard where serial is /dev/ttyS0 <br>
+On Joule and MRB the serial debug is /dev/ttyS2 <br>
+
+You may have to change the configuration in your boot loader which is located in the EFI partition.
+
+## Serial debug cable
+
+On the Minnowboard the serial cable is a FTDI serial cable. The wiring can be found [here](http://wiki.minnowboard.org/MinnowBoard_MAX_HW_Setup).<br>
+On the Joule the serial connection is done via the micro USB cable which is not provided in the Developer kit. Details can be found [here](https://software.intel.com/en-us/node/667851).<br>
+
+## Which port name is used to define the connected display(s)
+
+Port naming may change with HW platforms and connected display. The simplest is to check following the fist boot, in the systemd journal which display names are listed.<br>
+```
+journalctl |grep Output
+```
+**Note:** The Output information is only listed if a real Display is connected to the connector on the board.<br>
+The file holding that configuration is /etc/xdg/weston/weston.ini<br>
+Common Display name for Intel are
+* HDMI-A-1
+* HDMI-A-2
+* LVDS-1
-- 
cgit