Softmixer controller for 4A (AGL Advance Audio Architecture). ------------------------------------------------------------ * Object: Simulate a hardware mixer through and Alsa-Loop driver and a user space mixer * Status: In Progress * Author: Fulup Ar Foll fulup@iot.bzh * Date : April-2018 ## Compile ``` mkdir build cd build cmake .. make ``` ## Install Alsa Loopback ``` sudo modprobe alsa-aloop ``` ## Assert LUA config file match your config ``` vim $PROJECT_ROOT/conf.d/project/lua.d/softmixer-01.lua # make sure both your loopback and targeted sound card path are valid ``` ## Run from shell ``` afb-daemon --name 4a-softmixer-afbd --port=1234 --workdir=/home/fulup/Workspace/Audio-4a/4a-softmixer/build \ --binding=package/lib/softmixer-binding.so --roothttp=package/htdocs --token= --tracereq=common --verbose # lua test script should return a response looking like response= { [1] = { ["uid"] = navigation,["runid"] = 101,["alsa"] = hw:5,0,6,["volid"] = 103,} , ["params"] = { ["channels"] = 2,["format"] = 2,["rate"] = 48000,["access"] = 3,} ,[2] = { .... } # runid: pause/resume alsa control you may change it with 'amixer -D hw:Loopback cset numid=101 on|off # volid: volume alsa control you may change it from 'alsamixer -Dhw:Loppback' or with 'amixer -D hw:Loopback cset numid=103 NN (o-100%) ``` Retrieve audio-stream alsa endpoint from response to 'L2C:snd_streams' command. Depending on your config 'hw:XXX' will change. Alsa snd-aloop impose '0' as playback device. Soft mixer will start from last subdevice and allocates one subdev for each audio-stream. ## Play some music Current version does not handle audio rate conversion, using gstreamer or equivalent to match with audio hardware params is mandatory. ``` gst123 --audio-output alsa=hw:XXX,0,7 $PROJECT_ROOT/conf.d/project/sounds/trio-divi-alkazabach.wav gst123 --audio-output alsa=hw:XXX,0,??? other sound file speaker-test -D hw:XXX:0:??? -twav -c!! 'cc' is the number of channel and depends on the audio stream zone target. ```