AGL framework, proposal of IoT.bzh ================================== version: 1 Date: 29 february 2016 Author: José Bollo Foreword -------- This document describes what we intend to do. It may happen that our current implementation and the content of this document differ. In case of differences, it is assumed that this document is right and the implementation is wrong. Introduction ------------ During the first works in having the security model of Tizen integrated in AGL (Automotive Grade Linux) distribution, it became quickly obvious that the count of components specific to Tizen to integrate was huge. Here is a minimal list of what was needed: - platform/appfw/app-installers - platform/core/security/cert-svc - platform/core/appfw/ail - platform/core/appfw/aul-1 - platform/core/appfw/libslp-db-util - platform/core/appfw/pkgmgr-info - platform/core/appfw/slp-pkgmgr But this list is complete because many dependencies are hidden. Those hidden dependencies are including some common libraries but also many tizen specific sub-components (iniparser, bundle, dlog, libtzplatform-config, db-util, vconf-buxton, ...). This is an issue because AGL is not expected to be Tizen. Taking it would either need to patch it for removing unwanted components or to take all of them. However, a careful study of the core components of the security framework of Tizen showed that their dependencies to Tizen are light (and since some of our work, there is no more dependency to tizen). Those components are **cynara**, **security-manager**, **D-Bus aware of cynara**. Luckyly, these core security components of Tizen are provided by [meta-intel-iot-security][meta-intel], a set of yocto layers. These layers were created by Intel to isolate Tizen specific security components from the initial port of Tizen to Yocto. The 3 layers are providing components for: * Implementing Smack LSM * Implementing Integrity Measurement Architecture * Implementing Tizen Security Framework The figure below shows the history of these layers. 2014 2015 Tizen OBS ----------+---------------------------> \ \ Tizen Yocto +---------+--------------> \ \ meta-intel-iot-security +-----------> We took the decision to use these security layers that provides the basis of the Tizen security, the security framework. For the components of the application framework, built top of the security framework, instead of pulling the huge set of packages from Tizen, we decided to refit it by developping a tiny set of components that would implement the same behaviour but without all the dependencies and with minor architectural improvements for AGL. These components are **afm-system-daemon** and **afm-user-daemon**. They provides infrastructure for installing, uninstalling, launching, terminating, stopping and resuming applications in a multi user secure environment. A third component exists in the framework, the binder **afb-daemon**. The binder provides the easiest way to provide secured API for any tier. Currently, the use of the binder is not absolutely mandatory. This documentation explains the framework created by IoT.bzh by rewriting the Tizen Application Framework. Be aware of the previous foreword. Overview -------- The figure below shows the major components of the framework and their interactions going through the following scenario: APPLICATION installs an other application and then launch it. +-----------------------------------------------------------------------+ | User | | ................................ | | : Smack isolation context : | | : : ........................... | | : +-----------------------+ : : Smack isolation context : | | : | | : : : | | : | APPLICATION | : : OTHER application : | | : | | : :.........................: | | : +-----------+-----------+ : ^ | | : | : | | | : |(1),(7) : |(13) | | : | : | | | : +-----------v-----------+ : +---------+---------------+ | | : | binder afb-daemon | : | | | | : +-----------------------+ : | afm-user-daemon | | | : | afm-main-plugin | : | | | | : +-----+--------------+--+ : +------^-------+------+---+ | | :........|..............|......: | | : | | |(2) |(8) |(10) | : | | | | | | : | | | +----v--------------------+---+ | : | | | | D-Bus session | |(11) :(12) | | | +-------------------------+---+ | : | | | | | : | | | |(9) | : | | | | | : | :===========|===================================|=======|======:========: | | | | : | | | +---v-------v--+ : | | +------v-------------+ (3) | | : | | | D-Bus system +-----------------> CYNARA | : | | +------+-------------+ | | : | | | +------^-------+ : | | |(4) | : | | | |(6) v | | +------v--------------+ +---------+---------------+ | | | | (5) | | | | | afm-system-daemon +-------------> SECURITY-MANAGER | | | | | | | | | +---------------------+ +-------------------------+ | | | | System | +-----------------------------------------------------------------------+ Let follow the sequence of calls: 1. APPLICATION calls its **binder** to install the OTHER application. 2. The plugin **afm-main-plugin** of the **binder** calls, through **D-Bus** system, the system daemon to install the OTHER application. 3. The system **D-Bus** checks wether APPLICATION has the permission or not to install applications by calling **CYNARA**. 4. The system **D-Bus** transmits the request to **afm-system-daemon**. **afm-system-daemon** checks the application to install, its signatures and rights and install it. 5. **afm-system-daemon** calls **SECURITY-MANAGER** for fullfilling security context of the installed application. 6. **SECURITY-MANAGER** calls **CYNARA** to install initial permissions for the application. 7. APPLICATION call its binder to start the nearly installed OTHER application. 8. The plugin **afm-main-plugin** of the **binder** calls, through **D-Bus** session, the user daemon to launch the OTHER application. 9. The session **D-Bus** checks wether APPLICATION has the permission or not to start an application by calling **CYNARA**. 10. The session **D-Bus** transmits the request to **afm-user-daemon**. 11. **afm-user-daemon** checks wether APPLICATION has the permission or not to start the OTHER application **CYNARA**. 12. **afm-user-daemon** uses **SECURITY-MANAGER** features to set the seciruty context for the OTHER application. 13. **afm-user-daemon** launches the OTHER application. This scenario does not cover all the features of the frameworks. Shortly because details will be revealed in the next chapters, the components are: * ***SECURITY-MANAGER***: in charge of setting Smack contexts and rules, of setting groups, and, of creating initial content of *CYNARA* rules for applications. * ***CYNARA***: in charge of handling API access permissions by users and by applications. * ***D-Bus***: in charge of checking security of messaging. The usual D-Bus security rules are enhanced by *CYNARA* checking rules. * ***afm-system-daemon***: in charge of installing and uninstalling applications. * ***afm-user-daemon***: in charge of listing applications, querying application details, starting, terminating, stopping, resuming applications and their instances for a given user context. * ***afb-binder***: in charge of serving resources and features through an HTTP interface. * ***afm-main-plugin***: This plugin allows applications to use the API of the AGL framework. Links between the "Security framework" and the "Application framework" ---------------------------------------------------------------------- The security framework refers to the security model used to ensure security and to the tools that are provided for implementing that model. The security model refers to how DAC (Discretionnary Access Control), MAC (Mandatory Access Control) and Capabilities are used by the system to ensure security and privacy. It also includes features of reporting using audit features and by managing logs and alerts. The application framework manages the applications: installing, uninstalling, starting, stopping, listing ... The application framework uses the security model/framework to ensure the security and the privacy of the applications that it manages. The application framework must be compliant with the underlyiong security model/framework. But it should hide it to the applications. The security framework ---------------------- The implemented security model is the security model of Tizen 3. This model is described [here][tizen-secu-3]. The security framework then comes from Tizen 3 but through the [meta-intel]. It includes: **Security-Manager**, **Cynara** and **D-Bus** compliant to Cynara. Two patches are applied to the security-manager. These patches are removing dependencies to packages specific of Tizen but that are not needed by AGL. None of these patches adds or removes any behaviour. **Theoritically, the security framework/model is an implementation details that should not impact the layers above the application framework**. The security framework of Tizen provides "nice lad" a valuable component to scan log files and analyse auditing. This component is still in developement. The application framework ------------------------- The application framework on top of the security framework provides the compoenents to install and uninstall applications and to run it in a secured environment. The goal is to manage applications and to hide the details of the security framework to the applications. For the reasons explained in introduction, we did not used the application framework of Tizen as is but used an adaptation of it. The basis is kept identical: the applications are distributed in a digitally signed container that must match the specifications of widgets (web applications). This is described by the technical recomendations [widgets] and [widgets-digsig] of the W3 consortium. This model allows the distribution of HTML, QML and binary applications. The management of signatures of the widget packages This basis is not meant as being rigid and it can be extended in the futur to include for example incremental delivery. The widgets ----------- ### signature of the The application framework This is the original part of our work here ### directory where are stored applications Applications can be installed in few places: on the system itself or on an extension device. For my phone, for example, it is the sd card. This translates to: - /usr/applications: for system wide applications - /opt/applications: for removable applications In the remaining of the document, these places are writen "APPDIR". Organisation of directory of applications ========================================= The main path for applivcations are: APPDIR/PKGID/VER. Where: - APPDIR is as defined above - PKGID is a directory whose name is the package identifier - VER is the version of the package MAJOR.MINOR This organisation has the advantage to allow several versions to leave together. This is needed for some good reasons (rolling back) and also for less good reasons (user habits). Identity of installed files --------------------------- All the files are installed as the user "userapp" and group "userapp". All files have rw(x) for user and r-(x) for group and others. This allows any user to read the files. Labelling the directories of applications ----------------------------------------- Organisation of data ==================== The data of a user are in its directory and are labelled using the labels of the application Setting Smack rules for the application ======================================= For Tizen, the following rules are set by the security manager for each application. System ~APP~ rwx System ~PKG~ rwxat System ~PKG~::RO rwxat ~APP~ System wx ~APP~ System::Shared rxl ~APP~ System::Run rwxat ~APP~ System::Log rwxa ~APP~ _ l User ~APP~ rwx User ~PKG~ rwxat User ~PKG~::RO rwxat ~APP~ User wx ~APP~ User::Home rxl ~APP~ User::App::Shared rwxat ~APP~ ~PKG~ rwxat ~APP~ ~PKG~::RO rxl Here, ~PKG~ is the identifier of the package and ~APP~ is the identifier of the application. What user can run an application? ================================= Not all user are able to run all applications. How to manage that? API of the framework ==================== Data handled ------------ === description of an application the JSON object: APPDESC { "appid": string, the application id for the framework "id": string, the application intrinsic id "version": string, the version of the application "path": string, the path of the directory of the application "width": integer, requested width of the application "height": integer, resqueted height of the application "name": string, the name of the application "description": string, the description of the application "shortname": string, the short name of the application "author": string, the author of the application } The base of the path is FWKAPI = /api/fwk request FWKAPI/runnables -- get the list of applications => [ APPDESC... ] request FWKAPI/detail?id=APPID subject to languages tuning => { "id": "APPID", "name": "name", "description": "description", "license": "license", "author": "author" } /* request FWKAPI/icon?id=APPID subject to languages tuning => the icon image */ request FWKAPI/run?id=APPID => { "status": "done/error", "data": { "runid": "RUNID" } } request FWKAPI/running => [ { "id": "RUNID", "appid": "APPID", "state": ... }... ] request FWKAPI/state?id=RUNID => { "id": "RUNID", "appid": "APPID", "state": ... } request FWKAPI/stop?id=RUNID => { "error": "message" ou "done": "RUNID" } request FWKAPI/suspend?id=RUNID => { "error": "message" ou "done": "RUNID" } request FWKAPI/resume?id=RUNID => { "error": "message" ou "done": "RUNID" } /* request FWKAPI/features => returns the features of the current application request FWKAPI/preferences => returns the features of the current application */ API of the store ================ The base of the path is STORAPI = /api/store request STORAPI/search[?q=...] subject to languages tuning => [ { "id": "APPID", "name": "name", "description": "description", "license": "license", "author": "author", "icon": "url" }... ] /* request STORAPI/icon?id=APPID subject to languages tuning => the icon image */ request STORAPI/detail?id=APPID => { "id": "APPID", "name": "name", "description": "description", "license": "license", "author": "author", "icon": "url", "permissions": [ "perm"... ] } request STORAPI/install?id=APPID&permissions => { "transaction": "XXX", "desc"= { see above } } or error [meta-intel]: https://github.com/01org/meta-intel-iot-security "A collection of layers providing security technologies" [widgets]: http://www.w3.org/TR/widgets "Packaged Web Apps" [widgets-digsig]: http://www.w3.org/TR/widgets-digsig "XML Digital Signatures for Widgets" [libxml2]: http://xmlsoft.org/html/index.html "libxml2" [openssl]: https://www.openssl.org "OpenSSL" [xmlsec]: https://www.aleksey.com/xmlsec "XMLSec" [json-c]: https://github.com/json-c/json-c "JSON-c" [d-bus]: http://www.freedesktop.org/wiki/Software/dbus "D-Bus" [libzip]: http://www.nih.at/libzip "libzip" [cmake]: https://cmake.org "CMake" [security-manager]: https://wiki.tizen.org/wiki/Security/Tizen_3.X_Security_Manager "Security-Manager" [app-manifest]: http://www.w3.org/TR/appmanifest "Web App Manifest" [tizen-security]: https://wiki.tizen.org/wiki/Security "Tizen security home page" [tizen-secu-3]: https://wiki.tizen.org/wiki/Security/Tizen_3.X_Overview "Tizen 3 security overview"