From e33fb7867a36b803f7ae2a1cb8f1a3b4f9076e08 Mon Sep 17 00:00:00 2001
From: zheng_wenlong <wenlong_zheng@nexty-ele.com>
Date: Mon, 23 Oct 2017 14:29:20 +0900
Subject: Split libhomescreen from agl-homescreen-service-2017

    Split libhomescreen library from agl-homescreen-service-2017.
    Relative commit:
        https://gerrit.automotivelinux.org/gerrit/#/c/11413/

Signed-off-by: zheng_wenlong <wenlong_zheng@nexty-ele.com>
---
 interfaces/homescreen.xml | 106 ----------------------------------------------
 1 file changed, 106 deletions(-)
 delete mode 100644 interfaces/homescreen.xml

(limited to 'interfaces/homescreen.xml')

diff --git a/interfaces/homescreen.xml b/interfaces/homescreen.xml
deleted file mode 100644
index 378ff54..0000000
--- a/interfaces/homescreen.xml
+++ /dev/null
@@ -1,106 +0,0 @@
-<!DOCTYPE node PUBLIC "-//freedesktop//DTD D-BUS Object Introspection 1.0//EN" "http://www.freedesktop.org/standards/dbus/1.0/introspect.dtd">
-<!-- Copyright (C) 2016, 2017 Mentor Graphics Development (Deutschland) GmbH
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
-      http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License. -->
-<node>
-<!--
-  org.agl.homescreen:
-  @short_description: A generic interface for the HomeScreen app.
-
-  This interface is a collection of methods from different functional areas to control the HomeScreen app.
--->
-	<interface name="org.agl.homescreen">
-		<!--
-		hardKeyPressed:
-		@key: The key that was pressed using the inputevent.hpp InputEvent::HardKey type.
-
-		This is used to inject hard keys into the HomeScreen app.
-		-->
-		<method name="hardKeyPressed">
-			<arg name="key" type="i" direction="in"/>
-		</method>
-		<!--
-		getSurfaceStatus:
-		@surfaceId: The given surface.
-		@status: The status can be unknown (-1), visible (0), invisible (1)
-
-		A surface can have three states. It can be visible, then it is shown on the screen.
-		It can be invisible, then it is not shown on the screen. Or the state is unknown.
-		-->
-		<method name="getSurfaceStatus">
-			<arg name="surfaceId" type="i" direction="in"/>
-			<arg name="status" type="i" direction="out"/>
-		</method>
-		<!--
-		requestSurfaceIdToFullScreen:
-		@surfaceId: The surface that request to be shown fullscreen.
-
-		This allows an application to set a surface to full screen.
-		-->
-		<method name="requestSurfaceIdToFullScreen">
-			<arg name="surfaceId" type="i" direction="in"/>
-		</method>
-		<!--
-		  getAllSurfacesOfProcess:
-		  @pid: The PID of the process.
-		  @surfaceIds: A list of surfaces that were created by the process.
-
-		  The surface IDs can for example be used to assign them to a layout render area.
-		-->
-		<method name="getAllSurfacesOfProcess">
-			<arg name="pid" type="i" direction="in"/>
-			<arg name="surfaceIds" type="ai" direction="out"/>
-			<annotation name="org.qtproject.QtDBus.QtTypeName.Out0" value="QList&lt;int&gt;"/>
-		</method>
-		<!--
-		renderAppToAreaAllowed:
-		@appCategory: The application category that is requested. Use enum AppCategory for this!
-		@layoutArea: The layout area where the application shall be rendered. Find the layoutArea ids in the layout definition!
-		@allowed: Returns true, if the application is allowed to be rendered in the area
-
-		This function can be used to request, if it is allowed to render an application of a specific category
-		in a layout area. The idea is to decide from an application point of view to allocate recources or not.
-		Example: an application will decide to render video based on this call. This call will not change anything, it is only a request.
-		-->
-		<method name="renderAppToAreaAllowed">
-			<arg name="appCategory" type="i" direction="in"/>
-			<arg name="layoutArea" type="i" direction="in"/>
-			<arg name="allowed" type="b" direction="out"/>
-		</method>
-		<!--
-		renderSurfaceToArea:
-		@surfaceId: The surface that is requested.
-		@layoutArea: The layout area where the surface shall be rendered. Find the layoutArea ids in the layout definition!
-
-		This is a special case. In the normal use case, one layout area is always filled completely
-		with the first surface, that the process creates (more precise: the surface with the lowest id).
-		By using this function, an app can request to position a different surface in the layout area.
-		-->
-		<method name="renderSurfaceToArea">
-			<arg name="surfaceId" type="i" direction="in"/>
-			<arg name="layoutArea" type="i" direction="in"/>
-		</method>
-		<!--
-		  surfaceVisibilityChanged:
-		  @surfaceId: The surface that changed.
-		  @visible: True, if the surface is visible.
-
-		  This is emitted when the visible property of the surfaces changes.
-		-->
-		<signal name="surfaceVisibilityChanged">
-			<arg name="surfaceId" type="i"/>
-			<arg name="visible" type="b"/>
-		</signal>
-	</interface>
-</node>
-
-- 
cgit 1.2.3-korg