From ec46ff0810a05d97d6604af75dd7fbad130a40e5 Mon Sep 17 00:00:00 2001 From: Jan-Simon Moeller Date: Fri, 2 Sep 2022 00:05:07 +0200 Subject: Initial version of Steering Wheel Microcontroller Firmware Reads all buttons and sends out CAN bus messages similar to the previous LIN converter. Best use thonny as IDE/Editor. Board is available on ttyACM0. Source code is stored on the board itself as: - boot.py (blinks board at boot) - main.py (main script that runs by default) The steering wheel decoder is in the steering-wheel subfolder. The monitor folder contains a simple serial monitor printing the CAN message. You need a CANpico board for this. The firmware used/tested with this code is in the firmware-CANpico subfolder. Signed-off-by: Jan-Simon Moeller Change-Id: I9751b6e0e7a2fc6cb6c82bb0a64719c6aa6ebe11 --- README.md | 0 1 file changed, 0 insertions(+), 0 deletions(-) create mode 100644 README.md (limited to 'README.md') diff --git a/README.md b/README.md new file mode 100644 index 0000000..e69de29 -- cgit