/* * MOST NetServices "Light" V3.2.7.0.1796 MultiInstance Patch * * Copyright (C) 2015 Microchip Technology Germany II GmbH & Co. KG * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * * You may also obtain this software under a propriety license from Microchip. * Please contact Microchip for further information. * */ /*! * \file * \brief Public header file of Application Message Service */ /*! * \addtogroup G_MNS_AMS_TYPES * @{ */ #ifndef MNS_AMS_PB_H #define MNS_AMS_PB_H /*------------------------------------------------------------------------------------------------*/ /* Includes */ /*------------------------------------------------------------------------------------------------*/ #include "mns_cfg.h" #include "mns_message_pb.h" #ifdef __cplusplus extern "C" { #endif /*! \brief Defines which address type was used by the transmitter of a message. */ typedef enum Mns_AmsRx_ReceiveType_ { MNS_AMSRX_RCT_SINGLECAST = 0U, /*!< \brief Message was transmitted as singlecast */ MNS_AMSRX_RCT_GROUPCAST = 1U, /*!< \brief Message was transmitted as groupcast */ MNS_AMSRX_RCT_BROADCAST = 2U /*!< \brief Message was transmitted as broadcast */ } Mns_AmsRx_ReceiveType_t; /*------------------------------------------------------------------------------------------------*/ /* Types */ /*------------------------------------------------------------------------------------------------*/ /*! \brief Application message Tx type */ typedef struct Mns_AmsTx_Msg_ { uint16_t destination_address; /*!< \brief Destination address. Find some predefined addresses \ref G_MNS_AMS "here". */ uint8_t fblock_id; /*!< \brief Function block ID (MOST FBlockID). */ uint8_t instance_id; /*!< \brief Instance ID (MOST InstID). */ uint16_t function_id; /*!< \brief Function ID (MOST FktID). */ Mns_OpType_t op_type; /*!< \brief Operation type (MOST OpType). */ uint8_t llrbc; /*!< \brief Specifies the "Low-Level Retry Block Count" (LLRBC) * \details Valid values: 0..100. Default value: configurable via \ref Mns_AmsTx_InitData_t "default_llrbc" * of the initialization structure \ref Mns_AmsTx_InitData_t. * \mns_ic_inic{ See also INIC API User's Guide, section \ref SEC_OS81118_19. } */ uint8_t *data_ptr; /*!< \brief Payload data */ uint16_t data_size; /*!< \brief The size of payload data in bytes */ void *custom_info_ptr; /*!< \brief Customer specific reference * \details The application is allowed to use this attribute to assign an * own reference to the message object. The reference is initialized * by MOST NetServices with \c NULL and will not alter until the * transmission has finished. */ } Mns_AmsTx_Msg_t; /*! \brief Application message Rx type */ typedef struct Mns_AmsRx_Msg_ { uint16_t source_address; /*!< \brief Source address */ uint8_t fblock_id; /*!< \brief Function block ID (MOST FBlockID). */ uint8_t instance_id; /*!< \brief Instance ID (MOST InstID). */ uint16_t function_id; /*!< \brief Function ID (MOST FktID). */ Mns_OpType_t op_type; /*!< \brief Operation type (MOST OpType). */ uint8_t *data_ptr; /*!< \brief Reference to payload */ uint16_t data_size; /*!< \brief Payload size in bytes */ void *custom_info_ptr; /*!< \brief Customer specific reference */ Mns_AmsRx_ReceiveType_t receive_type; /*!< \brief Defines which address type was used by the transmitter of this message */ } Mns_AmsRx_Msg_t; /*! \brief Transmission result of an application message */ typedef enum Mns_AmsTx_Result_ { MNS_AMSTX_RES_SUCCESS = 0x00U,/*!< \brief The transmission succeeded. */ MNS_AMSTX_RES_ERR_RETRIES_EXP = 0x01U,/*!< \brief The transmission including all retries have failed. * \details The following issues may have caused the failure: * - message corruption * - transmission timeouts * - full receive buffers of the destination device * - full receive buffers of the local device if the * destination was the own address, own group or broadcast * address * . */ MNS_AMSTX_RES_ERR_INVALID_TGT = 0x02U,/*!< \brief The transmission failed because the specified destination * address is not found or not valid. * \details The following issues may have caused the failure: * - device with the given destination address is not found * - destination address is reserved (for future use) * - destination address is 0xFFFF (un-initialized logical * node address is not supported) * . */ MNS_AMSTX_RES_ERR_NOT_AVAILABLE = 0x03U,/*!< \brief The transmission failed since the network or the INIC * is not available. */ MNS_AMSTX_RES_ERR_BUF_INTERNAL = 0xFEU,/*!< \brief The transmission failed because the allocation of an Rx message object failed. * The Rx message object is required to receive the message via the own Rx message queue. * \details This is possible in the following cases: * - A message is transmitted to the own node address and the allocation * of an Rx message object failed. * - The network transmission to the own group address or broadcast address * succeeded but the allocation of an Rx message object failed. The application * has to decide whether to retransmit the message to the own address again. */ MNS_AMSTX_RES_ERR_UNEXPECTED = 0xFFU /*!< \brief The transmission failed due to an unexpected error. * The cause of this failure may be an invalid INIC configuration, * or an INIC to MOST NetServices incompatibility issue. */ } Mns_AmsTx_Result_t; /*! \brief Detailed INIC transmission information which might be useful for debugging purposes. */ typedef enum Mns_AmsTx_Info_ { MNS_AMSTX_I_SUCCESS = 0x00U, /*!< \brief The transmission succeeded. * \details The corresponding transmission result is \ref MNS_AMSTX_RES_SUCCESS. */ MNS_AMSTX_I_ERR_CFG_NORECEIVER = 0x01U, /*!< \brief The transmission failed because the MOST network is not accessible for * MCM in the current attach state or for ICM in general. * \details The corresponding transmission result is \ref MNS_AMSTX_RES_ERR_UNEXPECTED. */ MNS_AMSTX_I_ERR_BF = 0x08U, /*!< \brief The transmission failed because the receivers buffer is full. * \details The corresponding transmission result is \ref MNS_AMSTX_RES_ERR_RETRIES_EXP. */ MNS_AMSTX_I_ERR_CRC = 0x09U, /*!< \brief The transmission failed because of a failed CRC. * \details The corresponding transmission result is \ref MNS_AMSTX_RES_ERR_RETRIES_EXP. */ MNS_AMSTX_I_ERR_ID = 0x0AU, /*!< \brief The transmission failed because of corrupted identifiers. * \details The corresponding transmission result is \ref MNS_AMSTX_RES_ERR_RETRIES_EXP. */ MNS_AMSTX_I_ERR_ACK = 0x0BU, /*!< \brief The transmission failed because of corrupted PACK or CACK. * \details The corresponding transmission result is \ref MNS_AMSTX_RES_ERR_RETRIES_EXP. */ MNS_AMSTX_I_ERR_TIMEOUT = 0x0CU, /*!< \brief The transmission failed because of a transmission timeout. * \details The corresponding transmission result is \ref MNS_AMSTX_RES_ERR_RETRIES_EXP. */ MNS_AMSTX_I_ERR_FATAL_WT = 0x10U, /*!< \brief The transmission failed because of destination is not available. * \details The corresponding transmission result is \ref MNS_AMSTX_RES_ERR_INVALID_TGT. */ MNS_AMSTX_I_ERR_FATAL_OA = 0x11U, /*!< \brief The transmission failed because of the destination is the own node address. * \details The corresponding transmission result is \ref MNS_AMSTX_RES_ERR_INVALID_TGT. */ MNS_AMSTX_I_ERR_UNAVAIL_TRANS = 0x18U, /*!< \brief The transmission canceled during the transition from network interface state * "available" to "not available". * \details The corresponding transmission result is \ref MNS_AMSTX_RES_ERR_NOT_AVAILABLE. */ MNS_AMSTX_I_ERR_UNAVAIL_OFF = 0x19U, /*!< \brief The transmission failed because the network interface state is "not available". * \details The corresponding transmission result is \ref MNS_AMSTX_RES_ERR_NOT_AVAILABLE. */ MNS_AMSTX_I_ERR_UNKNOWN = 0xFEU, /*!< \brief The transmission failed because of an unknown INIC error code. * \details The corresponding transmission result is \ref MNS_AMSTX_RES_ERR_UNEXPECTED. * Please check if the MNS version is compatible with the applied INIC firmware version. */ MNS_AMSTX_I_ERR_UNSYNCED = 0xFFU /*!< \brief The transmission failed because the communication between the EHC (MOST NetServices) * and the INIC is lost. * \details The reason can be a communication error between the EHC and the INIC or that * the application has called Mns_Stop().\n * The corresponding transmission result is \ref MNS_AMSTX_RES_ERR_NOT_AVAILABLE. */ } Mns_AmsTx_Info_t; /*! \brief Defines the usage of a requested memory chunk */ typedef enum Mns_Ams_MemUsage_ { MNS_AMS_RX_OBJECT, /*!< \brief Memory is required to allocate an Rx message object */ MNS_AMS_RX_PAYLOAD, /*!< \brief Memory is required to allocate Rx message payload */ MNS_AMS_TX_OBJECT, /*!< \brief Memory is required to allocate a Tx message object */ MNS_AMS_TX_PAYLOAD /*!< \brief Memory is required to allocate Tx message payload */ } Mns_Ams_MemUsage_t; /*! \brief Callback function type that is invoked to allocate external payload for a segmented Rx message * \param inst_ptr Reference to the (external) memory management * \param mem_size Reference to the required memory size in bytes. Valid values: 0..65535. * \param type Declares how the memory is used by the MOST NetServices * \param custom_info_pptr Reference which is related to the memory chunk and can be set by * the application. * \return Pointer to the provided memory chunk. The application has to guarantee that the memory size * is equal or greater than \c mem_size. The application has to return \c NULL if it is not able * to allocate the required memory at this moment. */ typedef void* (*Mns_Ams_AllocMemCb_t)(void *inst_ptr, uint16_t mem_size, Mns_Ams_MemUsage_t type, void** custom_info_pptr); /*! \brief Callback function type that is invoked to free external payload for a segmented Rx message * \param inst_ptr Reference to the (external) memory management * \param mem_ptr Reference to the external payload memory * \param type Declares how the memory is used by the MOST NetServices * \param custom_info_ptr Reference to memory related information which was set by the application * during memory allocation */ typedef void (*Mns_Ams_FreeMemCb_t)(void *inst_ptr, void *mem_ptr, Mns_Ams_MemUsage_t type, void* custom_info_ptr); /*! \brief Type of a callback function that is invoked by the MOST NetServices as soon as a * message transmission was finished * \details The callback function notifies the result of a completed transmission. If * the message has external payload, the application must decide whether * to re-use or to free the external payload. * \param msg_ptr Reference to the related Tx message object. When the callback function returns * the reference is no longer valid. * \param result The transmission result. * \param info Detailed INIC transmission result, which might be helpful for debug purposes. */ typedef void (*Mns_AmsTx_CompleteCb_t)(Mns_AmsTx_Msg_t* msg_ptr, Mns_AmsTx_Result_t result, Mns_AmsTx_Info_t info); /*! * @} * \addtogroup G_MNS_AMS * @{ */ /*! \brief Type of a callback function that is invoked by MOST NetServices to notify that * a Tx application message object is available again while a previous * allocation using Mns_AmsTx_AllocMsg() has failed. */ typedef void (*Mns_AmsTx_MsgFreedCb_t)(void); /*! \brief Callback function type that is invoked if the MOST NetServices has received a message * completely and appended to the Rx message queue. */ typedef void (*Mns_AmsRx_MsgReceivedCb_t)(void); #ifdef __cplusplus } /* extern "C" */ #endif #endif /* ifndef MNS_AMS_PB_H */ /*! @} */ /*------------------------------------------------------------------------------------------------*/ /* End of file */ /*------------------------------------------------------------------------------------------------*/