#!/bin/bash if [ ! "$(whoami)" = "root" ] then echo Warning you are not root, expect problems! fi if [ -d /lib/modules/3.10.31-ltsi/extra ] then cd /lib/modules/3.10.31-ltsi/extra/ echo Switched to folder:$(pwd) else echo Searching driver in folder:$(pwd) fi #unload MOST Kernel modules lsmod | grep "^mxc_mlb\>" > /dev/null && rmmod mxc_mlb && echo "unloaded mxc_mlb" lsmod | grep "^hdm_dim2_mx6q\>" > /dev/null && rmmod hdm_dim2_mx6q && echo "unloaded hdm_dim2_mx6q" lsmod | grep "^hdm_dim2\>" > /dev/null && rmmod hdm_dim2 && echo "unloaded hdm_dim2" lsmod | grep "^hdm_usb\>" > /dev/null && rmmod hdm_usb && echo "unloaded hdm_usb" lsmod | grep "^aim_sound\>" > /dev/null && rmmod aim_sound && echo "unloaded aim_sound" lsmod | grep "^aim_v4l2\>" > /dev/null && rmmod aim_v4l2 && echo "unloaded aim_v4l2" lsmod | grep "^aim_cdev\>" > /dev/null && rmmod aim_cdev && echo "unloaded aim_cdev" lsmod | grep "^aim_network\>" > /dev/null && rmmod aim_network && echo "unloaded aim_network" lsmod | grep "^mostcore\>" > /dev/null && rmmod mostcore && echo "unloaded mostcore" echo #load V4L support lsmod | grep "^media\>" || insmod /lib/modules/$(uname -r)/kernel/drivers/media/media.ko lsmod | grep "^videodev\>" || insmod /lib/modules/$(uname -r)/kernel/drivers/media/v4l2-core/videodev.ko #load MOST Kernel modules insmod mostcore.ko && echo "loaded mostcore" insmod aim_cdev.ko && echo "loaded aim_cdev" [ -e aim_network.ko ] && insmod aim_network.ko && echo "loaded aim_network" [ -e aim_sound.ko ] && insmod aim_sound.ko && echo "loaded sound" [ -e aim_v4l2.ko ] && insmod aim_v4l2.ko && echo "loaded v4l2" [ -e hdm_usb.ko ] && insmod hdm_usb.ko && echo "loaded hdm_usb" [ -e hdm_dim2.ko ] && insmod hdm_dim2.ko clock_speed=4096fs fcnt=3 && echo "loaded hdm_dim2" [ -e hdm_dim2_mx6q.ko ] && insmod hdm_dim2_mx6q.ko && echo "loaded hdm_dim2_mx6q" DEVS=/sys/devices/virtual/most/mostcore/devices AIMS=/sys/devices/virtual/most/mostcore/aims xset() { VAL=$1 FILE=$2 #echo "$VAL > $FILE" echo "$VAL" > $FILE } SetAsyncChannel() { MDEV=mdev$1 CH_NAME=$2 DIR=dir_$3 BUFSIZE=$4 CHANNEL=$DEVS/$MDEV/$CH_NAME [ -e $CHANNEL/set_buffer_size ] || return 1 [ "$(cat $CHANNEL/set_buffer_size)" = "0" ] || return 2 echo "Set Ethernet $MDEV channel: $CH_NAME" xset async $CHANNEL/set_datatype xset $DIR $CHANNEL/set_direction xset 32 $CHANNEL/set_number_of_buffers xset $BUFSIZE $CHANNEL/set_buffer_size xset $MDEV:$CH_NAME: $AIMS/networking/add_link return 0 } StartupEth() { METH=meth$1 IFC_ALL=$2 IFC_UP=$3 #if device not exist return echo "$IFC_ALL" | grep -q $METH || return 1 #if the interface is down, start it if [ -z "`echo "$IFC_UP" | grep $METH`" ] then echo Starting up $METH ifconfig $METH up return 2 fi #if the IP is already set, we have nothing to do anymore ifconfig $METH |grep -q "inet addr:" && return 3 MAC=`ifconfig -a $METH | awk '/HWaddr/{ print $5}'` #if MAC address has not been set yet return [ -z "$MAC" ] && return 4 [ $MAC = "FF:FF:FF:FF:FF:FF" ] && return 5 [ $MAC = "ff:ff:ff:ff:ff:ff" ] && return 5 [ $MAC = "00:00:00:00:00:00" ] && return 6 m0=$(echo $((16#${MAC:0:2}))) m1=$(echo $((16#${MAC:3:2}))) m2=$(echo $((16#${MAC:6:2}))) m3=$(echo $((16#${MAC:9:2}))) m4=$(echo $((16#${MAC:12:2}))) m5=$(echo $((16#${MAC:15:2}))) IP=10.0.$m2.$((1+$m5)) echo Setting IP address $IP for device $METH MAC:$m0-$m1-$m2-$m3-$m4-$m5 ifconfig $METH $IP netmask 255.255.255.0 return 0 } ########################## ## USER ADJUSTABLE AREA ## ########################## while : do for i in 0 1 2 3 4 5 6 7 8 9 do #USB attached INICs: #MEP SetAsyncChannel $i ep8e rx 1548 && SetAsyncChannel $i ep0e tx 1548 #MLB attached INICs: #MEP SetAsyncChannel $i ca6 rx 1548 && SetAsyncChannel $i ca8 tx 1548 done IFC_ALL="$(ifconfig -a)" IFC_UP="$(ifconfig)" for i in 0 1 2 3 4 5 6 7 8 9 do StartupEth $i "$IFC_ALL" "$IFC_UP" done sleep 3 done