From af1a266670d040d2f4083ff309d732d648afba2a Mon Sep 17 00:00:00 2001
From: Angelos Mouzakitis <a.mouzakitis@virtualopensystems.com>
Date: Tue, 10 Oct 2023 14:33:42 +0000
Subject: Add submodule dependency files
Change-Id: Iaf8d18082d3991dec7c0ebbea540f092188eb4ec
---
roms/u-boot/arch/arm/dts/at91sam9x5cm.dtsi | 100 +++++++++++++++++++++++++++++
1 file changed, 100 insertions(+)
create mode 100644 roms/u-boot/arch/arm/dts/at91sam9x5cm.dtsi
(limited to 'roms/u-boot/arch/arm/dts/at91sam9x5cm.dtsi')
diff --git a/roms/u-boot/arch/arm/dts/at91sam9x5cm.dtsi b/roms/u-boot/arch/arm/dts/at91sam9x5cm.dtsi
new file mode 100644
index 000000000..b098ad8cd
--- /dev/null
+++ b/roms/u-boot/arch/arm/dts/at91sam9x5cm.dtsi
@@ -0,0 +1,100 @@
+/*
+ * at91sam9x5cm.dtsi - Device Tree Include file for AT91SAM9x5 CPU Module
+ *
+ * Copyright (C) 2012 Atmel,
+ * 2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+ memory {
+ reg = <0x20000000 0x8000000>;
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ ahb {
+ apb {
+ pinctrl@fffff400 {
+ 1wire_cm {
+ pinctrl_1wire_cm: 1wire_cm-0 {
+ atmel,pins = <AT91_PIOB 18 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>; /* PB18 multidrive, conflicts with led */
+ };
+ };
+ };
+
+ rtc@fffffeb0 {
+ status = "okay";
+ };
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ atmel,has-pmecc; /* Enable PMECC */
+ atmel,pmecc-cap = <2>;
+ atmel,pmecc-sector-size = <512>;
+ nand-on-flash-bbt;
+ status = "okay";
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ uboot@40000 {
+ label = "u-boot";
+ reg = <0x40000 0x80000>;
+ };
+
+ ubootenv@c0000 {
+ label = "U-Boot Env";
+ reg = <0xc0000 0x140000>;
+ };
+
+ kernel@200000 {
+ label = "kernel";
+ reg = <0x200000 0x600000>;
+ };
+
+ rootfs@800000 {
+ label = "rootfs";
+ reg = <0x800000 0x1f800000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pb18 {
+ label = "pb18";
+ gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ pd21 {
+ label = "pd21";
+ gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ 1wire_cm {
+ compatible = "w1-gpio";
+ gpios = <&pioB 18 GPIO_ACTIVE_HIGH>;
+ linux,open-drain;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_1wire_cm>;
+ status = "okay";
+ };
+
+};
--
cgit