From 9e86046cdb356913ae026f616e5bf17f6f238aa5 Mon Sep 17 00:00:00 2001 From: Tadao Tanikawa Date: Fri, 20 Nov 2020 23:17:04 +0900 Subject: Remove unused directories and files in video_in_hal The directory video_in_hal contained a lot of unnecessary directories and files which supposed to have been accidentally copied from staging/toyota.git druing migration. Signed-off-by: Tadao Tanikawa Change-Id: I12f2d72562bc008080ae866831d966c0b751914c --- .../ss_devicedetection_service_ifc.h | 1118 -------------------- 1 file changed, 1118 deletions(-) delete mode 100755 video_in_hal/systemservice/interface_unified/library/include/system_service/ss_devicedetection_service_ifc.h (limited to 'video_in_hal/systemservice/interface_unified/library/include/system_service/ss_devicedetection_service_ifc.h') diff --git a/video_in_hal/systemservice/interface_unified/library/include/system_service/ss_devicedetection_service_ifc.h b/video_in_hal/systemservice/interface_unified/library/include/system_service/ss_devicedetection_service_ifc.h deleted file mode 100755 index 1ad7e67..0000000 --- a/video_in_hal/systemservice/interface_unified/library/include/system_service/ss_devicedetection_service_ifc.h +++ /dev/null @@ -1,1118 +0,0 @@ -/* - * @copyright Copyright (c) 2016-2020 TOYOTA MOTOR CORPORATION. - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -/** - * @file ss_devicedetection_service_ifc.h - * @brief This file supports the Device Detection service interface. - */ - -/** @addtogroup BaseSystem - * @{ - */ -/** @addtogroup system_service - * @ingroup BaseSystem - * @{ - */ -/** @addtogroup device_detection_service - * @ingroup system_service - * @{ - */ -/** @addtogroup device_manager - * @ingroup device_detection_service - * @{ - */ - -#ifndef SS_DEVICE_DETECTION_SERVICE_IFC_H_ // NOLINT (build/header_guard) -#define SS_DEVICE_DETECTION_SERVICE_IFC_H_ - -#include -#include -#include "system_service/ss_devicedetection_service_protocol.h" - -// CID(Card Identification Register Data)of SD/MMC card -typedef struct T_cid { - UI_8 mid; // Manufacture ID - UI_8 oid[3]; // OEM/Application ID - UI_8 pnm[6]; // Product name - UI_8 prv; // Product revision - UI_32 psn; // Product serial number - UI_16 mdt; // Manufacture date code - UI_8 cr7cs; // CRC7 Check sum -} Tcid; - -/** - * @class DeviceDetectionServiceIf - * \~english @brief Device detection - * \~english @par Brief Introduction - * Class to provide the device detection function - * - */ -class DeviceDetectionServiceIf { - public: - ///////////////////////////////////////////////////////////////////////////////////// - /// \ingroup DeviceDetectionServiceIf - /// \~english @par Summary - /// Constructor of DeviceDetectionServiceIf class. - /// \~english @param None - /// \~english @retval None - /// \~english @par Preconditions - /// - None. - /// \~english @par Change of the internal state - /// - The internal state is not changed. - /// \~english @par Causes of failures - /// None - /// \~english @par Classification - /// Public - /// \~english @par Type - /// None - /// \~english @par Detail - /// To generate a DeviceDetectionServiceIf class. \n - /// Member variables (m_hApp, m_hService, m_hSession) to be NULL initialization. \n - /// After the constructor, be sure to call Initialize method. - /// \~english @see ~DeviceDetectionServiceIf, Initialize - //////////////////////////////////////////////////////////////////////////////////// - DeviceDetectionServiceIf(); - - ///////////////////////////////////////////////////////////////////////////////////// - /// \ingroup ~DeviceDetectionServiceIf - /// \~english @par Summary - /// Destructor of DeviceDetectionServiceIf class. - /// \~english @param None - /// \~english @retval None - /// \~english @par Preconditions - /// - None. - /// \~english @par Change of the internal state - /// - The internal state is not changed. - /// \~english @par Causes of failures - /// None - /// \~english @par Classification - /// Public - /// \~english @par Type - /// None - /// \~english @par Detail - /// To delete a DeviceDetectionServiceIf class. \n - /// Session is the case still open, to close the session.\n - /// Service is the case still open, to close the service. - /// Member variables (m_hApp, m_hService, m_hSession) to be NULL initialization. - /// \~english @see DeviceDetectionServiceIf - //////////////////////////////////////////////////////////////////////////////////// - virtual ~DeviceDetectionServiceIf(); - - ///////////////////////////////////////////////////////////////////////////////////// - /// \ingroup Initialize - /// \~english @par Summary - /// API to initialize the DeviceDetectionServiceIf class. - /// \~english @param [in] hApp - /// HANDLE - HANDLE for Application - /// \~english @retval TRUE Success - /// \~english @retval FALSE Failure - /// \~english @par Preconditions - /// - Generation/initialization of Dispatcher for the Application (FrameworkunifiedCreateDispatcherWithoutLoop etc) \n - /// has been done. - /// \~english @par Change of the internal state - /// - The internal state is not changed. - /// \~english @par Causes of failures - /// Conditions for return FALSE is as follows. - /// - NULL handle specified in the argument - /// \~english @par Classification - /// Public - /// \~english @par Type - /// Sync only(None communication) - /// \~english @par Detail - /// Application to use the services of device_detection_service is, after generating a \n - /// DeviceDetectionServiceIf class, which is a method to be executed first. \n - /// Member variable(m_hApp) of DeviceDetectionServiceIf class initialized with hApp \n - /// that has been specified by the argument. - /// \~english @see DeviceDetectionServiceIf - //////////////////////////////////////////////////////////////////////////////////// - BOOL Initialize(HANDLE hApp); - - ///////////////////////////////////////////////////////////////////////////////////// - /// \ingroup NotifyOnDeviceDetectionAvailability - /// \~english @par Summary - /// API to set the Callback function for Availability notification of Device Detection Service. - /// \~english @param [in] f_pCallBackFn - /// CbFuncPtr - Pointer to function callback for Device Detection Service Availability Notification - /// \~english @retval eFrameworkunifiedStatusOK Success - /// \~english @retval eFrameworkunifiedStatusInvldParam Invalid parameter - /// \~english @retval eFrameworkunifiedStatusInvldHandle Invalid handle - /// \~english @retval eFrameworkunifiedStatusInvldHndlType Invalid type of handle - /// \~english @retval eFrameworkunifiedStatusMsgQFull Message queue is full - /// \~english @retval eFrameworkunifiedStatusErrNoEBADF Invalid File-Descriptor - /// \~english @retval eFrameworkunifiedStatusErrNoEINTR An interrupt is generated by the system call (signal) - /// \~english @retval eFrameworkunifiedStatusInvldBufSize Invalid buffer-size - /// \~english @retval eFrameworkunifiedStatusFail Some sort of error occurred - /// \~english @retval eFrameworkunifiedStatusErrOther Other error has occurred(Cannot access shared memory, etc.) - /// \~english @par Preconditions - /// - Generation/initialization of Dispatcher for the Application (FrameworkunifiedCreateDispatcherWithoutLoop etc) \n - /// has been done. - /// \~english @par Change of the internal state - /// - The internal state is not changed. - /// \~english @par Causes of failures - /// - HANDLES in the class member variables (m_hApp) is NULL. [eFrameworkunifiedStatusInvldHandle] - /// - Callback function pointer specified by the argument is NULL. [eFrameworkunifiedStatusInvldHandle] - /// - Can not get the App/Thread name from HANDLE in the class member variables (m_hApp). - /// [eFrameworkunifiedStatusInvldHandle] - /// - HANDLE (m_hApp) in the class member variables are not appropriate(which is invalid). - /// [eFrameworkunifiedStatusInvldParam] - /// - The acquisition of the buffer that stores the Callback information specified in the argument failed. - /// [eFrameworkunifiedStatusInvldParam] - /// - Can not be acquired memory in the acquisition of the buffer of the message for transmission (malloc). - /// [eFrameworkunifiedStatusFail] - /// - Message queue HANDLE is NULL in the HANDLE of the class member variables (m_hApp). [eFrameworkunifiedStatusInvldParam] - /// - Message queue HANDLE in HANDLE (m_hApp) of the class member variables are not appropriate(which is - /// invalid). [eFrameworkunifiedStatusInvldParam] - /// - It is not appropriate message queue name of HANDLE (m_hApp) in the class member variables(The name is - /// NULL, more than 20byte). [eFrameworkunifiedStatusInvldHandle] - /// - Is not a transmission type message queue type of HANDLE (m_hApp) in the class member variables. - /// [eFrameworkunifiedStatusInvldHndlType] - /// - Session message queue is full to SS_DeviceDetectionService. [eFrameworkunifiedStatusMsgQFull] - /// - It is invalid transmission file descriptor of the session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusErrNoEBADF] - /// - Interruption by the system call (signal) has occurred during the transmission of the session message for - /// SS_DeviceDetectionService. [eFrameworkunifiedStatusErrNoEINTR] - /// - Incorrect size of the transmit buffer of the session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusInvldBufSize] - /// - Any errors occur during the transmission of a session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusFail] - /// - It failed to shared memory access for transmission of the session message for SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusErrOther] - /// \~english @par Classification - /// Public - /// \~english @par Type - /// Method x Pub-Sub - /// \~english @par Detail - /// Which is a method to register a Callback function for the initialization of the \n - /// device_detection_service receives the timing at which the start (open) is possible \n - /// of completed service.\n - /// (Native Service of API: Use the FrameworkunifiedSubscribeNotificationsWithCallback, to register \n - /// a Callback function for Availability notification of Device Detection Service.) - /// \~english @see DetachDeviceDetectionAvailabilityCb - //////////////////////////////////////////////////////////////////////////////////// - EFrameworkunifiedStatus NotifyOnDeviceDetectionAvailability(CbFuncPtr f_pCallBackFn); - - ///////////////////////////////////////////////////////////////////////////////////// - /// \ingroup NotifyOnOpenSessionAck - /// \~english @par Summary - /// API to set the Callback function for OpenSessionRequest response from the Device Detection Service. - /// \~english @param [in] f_pCallBackFn - /// CbFuncPtr - Callback function pointer for receiving the response of OpenSessionRequest - /// \~english @retval eFrameworkunifiedStatusOK Success - /// \~english @retval eFrameworkunifiedStatusInvldParam Invalid parameter - /// \~english @retval eFrameworkunifiedStatusInvldHandle Invalid handle - /// \~english @par Preconditions - /// - Generation/initialization of Dispatcher for the Application (FrameworkunifiedCreateDispatcherWithoutLoop etc) \n - /// has been done. - /// \~english @par Change of the internal state - /// - The internal state is not changed. - /// \~english @par Causes of failures - /// - HANDLES in the class member variables (m_hApp) is NULL. [eFrameworkunifiedStatusInvldHandle] - /// - Callback function pointer specified by the argument is NULL. [eFrameworkunifiedStatusInvldHandle] - /// - HANDLE (m_hApp) in the class member variables are not appropriate(which is invalid). - /// [eFrameworkunifiedStatusInvldParam] - /// \~english @par Classification - /// Public - /// \~english @par Type - /// Sync only(None communication) - /// \~english @par Detail - /// To register the Callback function for receiving a response of completion of OpenSessionRequest to - /// Dispatcher. \n - /// (Native Service of API: Use the FrameworkunifiedAttachCallbackToDispatcher, to register a Callback function for receiving - /// \n - /// a response of completion of OpenSessionRequest to Dispatcher.) \n - /// On successful session establishment, the client can register for device information. - /// \~english @see DetachOpenSessionAckCb - //////////////////////////////////////////////////////////////////////////////////// - EFrameworkunifiedStatus NotifyOnOpenSessionAck(CbFuncPtr f_pCallBackFn); - - ///////////////////////////////////////////////////////////////////////////////////// - /// \ingroup NotifyOnCloseSessionAck - /// \~english @par Summary - /// API to set the Callback function for CloseSessionRequest response from the Device Detection Service. - /// \~english @param [in] f_pCallBackFn - /// CbFuncPtr - Callback function pointer for receiving the response of CloseSessionRequest - /// \~english @retval eFrameworkunifiedStatusOK Success - /// \~english @retval eFrameworkunifiedStatusInvldParam Invalid parameter - /// \~english @retval eFrameworkunifiedStatusInvldHandle Invalid handle - /// \~english @par Preconditions - /// - Generation/initialization of Dispatcher for the Application (FrameworkunifiedCreateDispatcherWithoutLoop etc) \n - /// has been done. - /// \~english @par Change of the internal state - /// - The internal state is not changed. - /// \~english @par Causes of failures - /// - HANDLES in the class member variables (m_hApp) is NULL. [eFrameworkunifiedStatusInvldHandle] - /// - Callback function pointer specified by the argument is NULL. [eFrameworkunifiedStatusInvldHandle] - /// - HANDLE (m_hApp) in the class member variables are not appropriate(which is invalid). - /// [eFrameworkunifiedStatusInvldParam] - /// \~english @par Classification - /// Public - /// \~english @par Type - /// Sync only(None communication) - /// \~english @par Detail - /// To register the Callback function for receiving a response of completion of CloseSessionRequest to - /// Dispatcher. \n - /// (Native Service of API: Use the FrameworkunifiedAttachCallbackToDispatcher, to register a Callback function for receiving - /// \n - /// a response of completion of CloseSessionRequest to Dispatcher.) \n - /// \~english @see DetachCloseSessionAckCb - //////////////////////////////////////////////////////////////////////////////////// - EFrameworkunifiedStatus NotifyOnCloseSessionAck(CbFuncPtr f_pCallBackFn); - - ///////////////////////////////////////////////////////////////////////////////////// - /// \ingroup OpenSessionRequest - /// \~english @par Summary - /// API to perform the generation of the service/session of Device Detection Service - /// \~english @param None - /// \~english @retval eFrameworkunifiedStatusOK Success - /// \~english @retval eFrameworkunifiedStatusMsgQFull Message queue is full - /// \~english @retval eFrameworkunifiedStatusErrNoEBADF Invalid File-Descriptor - /// \~english @retval eFrameworkunifiedStatusErrNoEINTR An interrupt is generated by the system call (signal) - /// \~english @retval eFrameworkunifiedStatusInvldBufSize Invalid buffer-size - /// \~english @retval eFrameworkunifiedStatusFail Some sort of error occurred - /// \~english @retval eFrameworkunifiedStatusErrOther Other error has occurred(Cannot access shared memory, etc.) - /// \~english @par Preconditions - /// - SS_DeviceDetectionService process has been started. - /// - Generation/initialization of Dispatcher for the Application (FrameworkunifiedCreateDispatcherWithoutLoop etc) \n - /// has been done, and Availability of Device Detection Service is TRUE. - /// \~english @par Change of the internal state - /// - The internal state is not changed. - /// \~english @par Causes of failures - /// - HANDLES in the class member variables (m_hApp) is NULL. [eFrameworkunifiedStatusInvldHandle] - /// - Service of Device Detection Service is not Availability state. [eFrameworkunifiedStatusFail] - /// - Service of Device Detection Service can not be opened (can not start). [eFrameworkunifiedStatusFail] - /// - SS_DeviceDetectionService message queue for the session is full. [eFrameworkunifiedStatusMsgQFull] - /// - Is invalid transmission file descriptor of the session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusErrNoEBADF] - /// - Interruption by the system call (signal) has occurred during the transmission of the session message to - /// SS_DeviceDetectionService. [eFrameworkunifiedStatusErrNoEINTR] - /// - It is an incorrect size of the transmit buffer of the session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusInvldBufSize] - /// - Some sort of error has occurred at the time of transmission of the session message to - /// SS_DeviceDetectionService. [eFrameworkunifiedStatusFail] - /// - It failed to shared memory access for transmission of the session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusErrOther] - /// \~english @par Classification - /// Public - /// \~english @par Type - /// Method x Pub-Sub - /// \~english @par Detail - /// And generate the service of device_detection_service, which is a method for generating a session.\n - /// (To send the command of PROTOCOL_OPEN_SESSION_REQ to device_detection_service.)\n - /// If you already service has been created, once to close the service. - /// \~english @see CloseSessionRequest - //////////////////////////////////////////////////////////////////////////////////// - EFrameworkunifiedStatus OpenSessionRequest(); - - ///////////////////////////////////////////////////////////////////////////////////// - /// \ingroup DecodeOpenSessionResponse - /// \~english @par Summary - /// API to perform the generation of the service/session of Device Detection Service - /// \~english @param None - /// \~english @retval eFrameworkunifiedStatusOK Success - /// \~english @retval eFrameworkunifiedStatusInvldHandle Invalid handle - /// \~english @retval eFrameworkunifiedStatusFail Some sort of error occurred - /// \~english @par Preconditions - /// - SS_DeviceDetectionService process has been started. - /// - Generation/initialization of Dispatcher for the Application (FrameworkunifiedCreateDispatcherWithoutLoop etc) \n - /// has been done, and Availability of Device Detection Service is TRUE. - /// \~english @par Change of the internal state - /// - The internal state is not changed. - /// \~english @par Causes of failures - /// - HANDLES in the class member variables (m_hService/m_hApp) is NULL. [eFrameworkunifiedStatusInvldHandle] - /// - Incorrect PROTOCOL_OPEN_SESSION_ACK message length of Device Detection Service. [eFrameworkunifiedStatusFail] - /// - PROTOCOL_OPEN_SESSION_ACK message of Device Detection Service can not be acquired. [eFrameworkunifiedStatusFail] - /// - Can not session generation of message transmission to Device Detection Service. [eFrameworkunifiedStatusFail] - /// \~english @par Classification - /// Public - /// \~english @par Type - /// Sync only(None communication) - /// \~english @par Detail - /// Get the session initiation response message(PROTOCOL_OPEN_SESSION_ACK) of Device Detection \n - /// Service, and get the session ID from the message. \n - /// Acquired session ID, (after opening the message transmission queue) created after a session \n - /// of message transmission, hold as the session information in the session HANDLE (m_hSession).\n - /// of the class member variable. - /// \~english @see OpenSessionRequest, CloseSessionRequest - //////////////////////////////////////////////////////////////////////////////////// - EFrameworkunifiedStatus DecodeOpenSessionResponse(); - - ///////////////////////////////////////////////////////////////////////////////////// - /// \ingroup RegisterForDeviceDetectionEvent - /// \~english @par Summary - /// API to register a Callback function for receiving the timing of when an event occurs in the device. - /// \~english @param [in] f_eDevDetectEvent - /// SS_DeviceDetectionServerEvents - Event type (USB/SD/...etc event) - /// \~english @param [in] f_pCallBackFn - /// CbFuncPtr - Pointer to a callback function that corresponds to the event - /// \~english @param [in] pfilepath - /// PCSTR - Pointer to the file path name(Non-support:Be NULL) - /// \~english @par - /// Event type (enum values of SS_DeviceDetectionServerEvents) - /// - SS_DEV_DETECT_ANY_USB_EV : Notify the insertion and mount path of USB MassStorage class(USB - /// mass storage is subject) - /// - SS_DEV_DETECT_ANY_SD_EV : Notify the insertion and mount path of SD card - /// - SS_DEV_INFO_ANY_USB_EV : Notify the USB device insertion and removal detection(All USB - /// devices are subject) - /// - SS_DEV_DETECT_ANY_DISC_EV : Notify the insertion of DISC(BD, DVD, CD) and mount path of block - /// devices - /// - SS_DEV_DETECT_ANY_USB_NCM_EV : Notify the insertion and network IF name of the USB NCM class - /// device(for MirrorLink) - /// - SS_DEV_DETECT_ANY_USB__CWORD57__EV : Notify the insertion and removal and the device file name of the - /// _CWORD57_ device(Rather than the _CWORD57_ only class, the device is subject) - /// - SS_DEV_DETECT_ANY_USB_ACM_EV : Notify the insertion and removal and device file name of the USB - /// ACM class device(for DCM device) - /// - SS_DEV_DETECT_ANY_USB_DEV_MNG_EV : Notify the insertion and removal and device file name of the USB - /// DeviceManagementModel class(for DCM device) - /// - SS_DEV_DETECT_ANY_USB_VEHICLE_CTRL_EV : Notify the insertion and removal and device file name of the USB - /// Vehicle Control class(for DCM device) - /// - SS_DEV_DETECT_ANY_USB_DSRC_APP_EV : Notify the insertion and removal and device file name of the USB - /// DSRC Application class(for DSRC device) - /// - SS_DEV_DETECT_ANY_USB_DSRC_CTRL_EV : Notify the insertion and removal and device file name of the USB - /// DSRC Control class(for DSRC device) - /// - SS_DEV_DETECT_ANY_USB_IR_VICS_DATA_EV : Notify the insertion and removal and device file name of the USB - /// IR-VICS Data class(for DSRC device) - /// - SS_DEV_ERR_USB_OVER_CURRENT_EV : Notify the overcurrent detection error of USB - /// - SS_DEV_DETECT_ANY_USB_MTP_EV : Notify the insertion and mount path of USB MTP class device - /// - SS_DEV_INFO_ANY_USB_NOTIFY_EV : Notify the connection of non-compliant USB device - /// - SS_DEV_DETECT_ANY_USB__CWORD57__ROLE_EV : Notify the insertion and removal of the _CWORD57_ device after - /// RoleSW(Rather than the _CWORD57_ only class, the device is subject) - /// - SS_DEV_INFO_SD_FORMAT_COMP_EV : Notify the SD format results - /// - SS_DEV_DETECT_ANY_USB_DCM_NCM_EV : Notify the insertion and removal and network IF name of the USB - /// NCM class device(for DCM) - /// - SS_DEV_INFO_ANY_USB_DVDP_EV : Notify the insertion and removal of the DVD-P device - /// \~english @par - /// For SS_DEV_INFO_ANY_USB_NOTIFY_EV, it is also notified in the event the following conditions. - /// - When the enumeration failed. - /// - When it detects the current excess of the USB device connected to the bus power HUB. - /// - When it is detected that the number of the USB device has exceeded the number of support. - /// - When it is detected that the HUB is connected beyond the HUB number that supports. - /// \~english @retval eFrameworkunifiedStatusOK Success - /// \~english @retval eFrameworkunifiedStatusInvldParam Invalid parameter - /// \~english @retval eFrameworkunifiedStatusInvldHandle Invalid handle - /// \~english @retval eFrameworkunifiedStatusNullPointer Invalid pointer - /// \~english @retval eFrameworkunifiedStatusMsgQFull Message queue is full - /// \~english @retval eFrameworkunifiedStatusErrNoEBADF Invalid File-Descriptor - /// \~english @retval eFrameworkunifiedStatusErrNoEINTR An interrupt is generated by the system call (signal) - /// \~english @retval eFrameworkunifiedStatusInvldBufSize Invalid buffer-size - /// \~english @retval eFrameworkunifiedStatusFail Some sort of error occurred - /// \~english @retval eFrameworkunifiedStatusErrOther Other error(It failed to open/allocation of shared memory) - /// \~english @par Preconditions - /// - SS_DeviceDetectionService process has been started. - /// - Generation/initialization of Dispatcher for the Application (FrameworkunifiedCreateDispatcherWithoutLoop etc) \n - /// has been done, and Availability of Device Detection Service is TRUE. - /// \~english @par Change of the internal state - /// - The internal state is not changed. - /// \~english @par Causes of failures - /// - HANDLES in the class member variables (m_hSession) is NULL. [eFrameworkunifiedStatusInvldHandle] - /// - Callback function pointer specified by the argument is NULL. [eFrameworkunifiedStatusInvldHandle] - /// - HANDLES in the class member variables (m_hApp) is NULL. [eFrameworkunifiedStatusInvldParam] - /// - HANDLE in the class member variables (m_hApp) is not appropriate (which is invalid) [eFrameworkunifiedStatusInvldParam] - /// - HANDLE in the class member variables (m_hSession) is not appropriate. (which is invalid) - /// [eFrameworkunifiedStatusNullPointer] - /// - SS_DeviceDetectionService message queue for the session is full. [eFrameworkunifiedStatusMsgQFull] - /// - Message Queue HANDLE for the session for SS_DeviceDetectionService is NULL. [eFrameworkunifiedStatusInvldHandle] - /// - Message Queue HANDLE for the session for SS_DeviceDetectionService are not appropriate(which is invalid). - /// [eFrameworkunifiedStatusInvldHandle] - /// - Session message queue name to SS_DeviceDetectionService is NULL. [eFrameworkunifiedStatusInvldHandle] - /// - Is invalid transmission file descriptor of the session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusErrNoEBADF] - /// - Interruption by the system call (signal) has occurred during the transmission of the session message to - /// SS_DeviceDetectionService. [eFrameworkunifiedStatusErrNoEINTR] - /// - It is an incorrect size of the transmit buffer of the session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusInvldBufSize] - /// - Some sort of error has occurred at the time of transmission of the session message to - /// SS_DeviceDetectionService. [eFrameworkunifiedStatusFail] - /// - It failed to shared memory access for transmission of the session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusErrOther] - /// \~english @par Classification - /// Public - /// \~english @par Type - /// Pub-Sub x Pub-Sub - /// \~english @par Detail - /// Which is a method to register a callback function for receiving the timing of the \n - /// occurrence of an event in the device. \n - /// \~english @see UnRegisterForDeviceDetectionEvent - //////////////////////////////////////////////////////////////////////////////////// - EFrameworkunifiedStatus RegisterForDeviceDetectionEvent( - SS_DeviceDetectionServerEvents f_eDevDetectEvent, CbFuncPtr f_pCallBackFn, - PCSTR pfilepath = NULL); - - ///////////////////////////////////////////////////////////////////////////////////// - /// \ingroup UnRegisterForDeviceDetectionEvent - /// \~english @par Summary - /// API to release a Callback function that corresponds to the event notification from the device - /// \~english @param [in] f_eDevDetectEvent - /// SS_DeviceDetectionServerEvents - Event notification type (USB/SD/...etc event) - /// \~english @par - /// Releasable event notification type (enum values of SS_DeviceDetectionServerEvents) - /// - SS_DEV_DETECT_ANY_USB_EV : Notify the insertion and mount path of USB MassStorage class(USB - /// mass storage is subject) - /// - SS_DEV_DETECT_ANY_SD_EV : Notify the insertion and mount path of SD card - /// - SS_DEV_INFO_ANY_USB_EV : Notify the USB device insertion and removal detection(All USB - /// devices are subject) - /// - SS_DEV_DETECT_ANY_DISC_EV : Notify the insertion of DISC(BD, DVD, CD) and mount path of block - /// devices - /// - SS_DEV_DETECT_ANY_USB_NCM_EV : Notify the insertion and network IF name of the USB NCM class - /// device(for MirrorLink) - /// - SS_DEV_DETECT_ANY_USB__CWORD57__EV : Notify the insertion and removal and the device file name of the - /// _CWORD57_ device(Rather than the _CWORD57_ only class, the device is subject) - /// - SS_DEV_DETECT_ANY_USB_ACM_EV : Notify the insertion and removal and device file name of the USB - /// ACM class device(for DCM device) - /// - SS_DEV_DETECT_ANY_USB_DEV_MNG_EV : Notify the insertion and removal and device file name of the USB - /// DeviceManagementModel class(for DCM device) - /// - SS_DEV_DETECT_ANY_USB_VEHICLE_CTRL_EV : Notify the insertion and removal and device file name of the USB - /// Vehicle Control class(for DCM device) - /// - SS_DEV_DETECT_ANY_USB_DSRC_APP_EV : Notify the insertion and removal and device file name of the USB - /// DSRC Application class(for DSRC device) - /// - SS_DEV_DETECT_ANY_USB_DSRC_CTRL_EV : Notify the insertion and removal and device file name of the USB - /// DSRC Control class(for DSRC device) - /// - SS_DEV_DETECT_ANY_USB_IR_VICS_DATA_EV : Notify the insertion and removal and device file name of the USB - /// IR-VICS Data class(for DSRC device) - /// - SS_DEV_ERR_USB_OVER_CURRENT_EV : Notify the overcurrent detection error of USB - /// - SS_DEV_DETECT_ANY_USB_MTP_EV : Notify the insertion and mount path of USB MTP class device - /// - SS_DEV_INFO_ANY_USB_NOTIFY_EV : Notify the connection of non-compliant USB device - /// - SS_DEV_DETECT_ANY_USB__CWORD57__ROLE_EV : Notify the insertion and removal of the _CWORD57_ device after - /// RoleSW(Rather than the _CWORD57_ only class, the device is subject) - /// - SS_DEV_INFO_SD_FORMAT_COMP_EV : Notify the SD format results - /// - SS_DEV_DETECT_FILEPATHNAME_EV : Notify the specified file access in pfilepath - /// - SS_DEV_DETECT_ANY_USB_DCM_NCM_EV : Notify the insertion and removal and network IF name of the USB - /// NCM class device(for DCM) - /// - SS_DEV_INFO_ANY_USB_DVDP_EV : Notify the insertion and removal of the DVD-P device - /// \~english @par - /// For SS_DEV_INFO_ANY_USB_NOTIFY_EV, it is also notified in the event the following conditions. - /// - When the enumeration failed. - /// - When it detects the current excess of the USB device connected to the bus power HUB. - /// - When it is detected that the number of the USB device has exceeded the number of support. - /// - When it is detected that the HUB is connected beyond the HUB number that supports. - /// \~english @retval eFrameworkunifiedStatusOK Success - /// \~english @retval eFrameworkunifiedStatusInvldParam Invalid parameter - /// \~english @retval eFrameworkunifiedStatusInvldHandle Invalid handle - /// \~english @retval eFrameworkunifiedStatusNullPointer Invalid pointer - /// \~english @retval eFrameworkunifiedStatusMsgQFull Message queue is full - /// \~english @retval eFrameworkunifiedStatusErrNoEBADF Invalid File-Descriptor - /// \~english @retval eFrameworkunifiedStatusErrNoEINTR An interrupt is generated by the system call (signal) - /// \~english @retval eFrameworkunifiedStatusInvldBufSize Invalid buffer-size - /// \~english @retval eFrameworkunifiedStatusFail Some sort of error occurred - /// \~english @retval eFrameworkunifiedStatusErrOther Other error(It failed to open/allocation of shared memory) - /// \~english @par Preconditions - /// - SS_DeviceDetectionService process has been started. - /// - Generation/initialization of Dispatcher for the Application (FrameworkunifiedCreateDispatcherWithoutLoop etc) \n - /// has been done, and Availability of Device Detection Service is TRUE. - /// \~english @par Change of the internal state - /// - The internal state is not changed. - /// \~english @par Causes of failures - /// - HANDLES in the class member variables (m_hSession) is NULL. [eFrameworkunifiedStatusInvldHandle] - /// - HANDLES in the class member variables (m_hApp) is NULL. [eFrameworkunifiedStatusInvldParam] - /// - HANDLE in the class member variables (m_hApp) is not appropriate (which is invalid) [eFrameworkunifiedStatusInvldParam] - /// - The service can not be determined from the HANDLE in the class member variables (m_hApp). [eFrameworkunifiedStatusFail] - /// - HANDLE in the class member variables (m_hSession) is not appropriate. (which is invalid) - /// [eFrameworkunifiedStatusNullPointer] - /// - SS_DeviceDetectionService message queue for the session is full. [eFrameworkunifiedStatusMsgQFull] - /// - Message Queue HANDLE for the session for SS_DeviceDetectionService is NULL. [eFrameworkunifiedStatusInvldHandle] - /// - Message Queue HANDLE for the session for SS_DeviceDetectionService are not appropriate(which is invalid). - /// [eFrameworkunifiedStatusInvldHandle] - /// - Session message queue name to SS_DeviceDetectionService is NULL. [eFrameworkunifiedStatusInvldHandle] - /// - Is invalid transmission file descriptor of the session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusErrNoEBADF] - /// - Interruption by the system call (signal) has occurred during the transmission of the session message to - /// SS_DeviceDetectionService. [eFrameworkunifiedStatusErrNoEINTR] - /// - It is an incorrect size of the transmit buffer of the session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusInvldBufSize] - /// - Some sort of error has occurred at the time of transmission of the session message to - /// SS_DeviceDetectionService. [eFrameworkunifiedStatusFail] - /// - It failed to shared memory access for transmission of the session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusErrOther] - /// \~english @par Classification - /// Public - /// \~english @par Type - /// Pub-Sub x Pub-Sub - /// \~english @par Detail - /// Which is a method to release a callback function for receiving the timing of the \n - /// occurrence of an event in the device. \n - /// \~english @see RegisterForDeviceDetectionEvent - //////////////////////////////////////////////////////////////////////////////////// - EFrameworkunifiedStatus UnRegisterForDeviceDetectionEvent( - SS_DeviceDetectionServerEvents f_eDevDetectEvent); - - ///////////////////////////////////////////////////////////////////////////////////// - /// \ingroup CloseSessionRequest - /// \~english @par Summary - /// API to perform the destruction of services/session of Device Detection Service - /// \~english @param None - /// \~english @retval eFrameworkunifiedStatusOK Success - /// \~english @retval eFrameworkunifiedStatusInvldHandle Invalid handle - /// \~english @retval eFrameworkunifiedStatusMsgQFull Message queue is full - /// \~english @retval eFrameworkunifiedStatusErrNoEBADF Invalid File-Descriptor - /// \~english @retval eFrameworkunifiedStatusErrNoEINTR An interrupt is generated by the system call (signal) - /// \~english @retval eFrameworkunifiedStatusInvldBufSize Invalid buffer-size - /// \~english @retval eFrameworkunifiedStatusFail Some sort of error occurred - /// \~english @retval eFrameworkunifiedStatusErrOther Other error has occurred(Cannot access shared memory, etc.) - /// \~english @par Preconditions - /// - SS_DeviceDetectionService process has been started. - /// - Generation/initialization of Dispatcher for the Application (FrameworkunifiedCreateDispatcherWithoutLoop etc) \n - /// has been done, and Availability of Device Detection Service is TRUE. - /// \~english @par Change of the internal state - /// - The internal state is not changed. - /// \~english @par Causes of failures - /// - HANDLES in the class member variables (m_hService/m_hSession) is NULL. [eFrameworkunifiedStatusInvldHandle] - /// - SS_DeviceDetectionService message queue for the session is full. [eFrameworkunifiedStatusMsgQFull] - /// - Is invalid transmission file descriptor of the session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusErrNoEBADF] - /// - Interruption by the system call (signal) has occurred during the transmission of the session message to - /// SS_DeviceDetectionService. [eFrameworkunifiedStatusErrNoEINTR] - /// - It is an incorrect size of the transmit buffer of the session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusInvldBufSize] - /// - Some sort of error has occurred at the time of transmission of the session message to - /// SS_DeviceDetectionService. [eFrameworkunifiedStatusFail] - /// - It failed to shared memory access for transmission of the session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusErrOther] - /// \~english @par Classification - /// Public - /// \~english @par Type - /// Method x Method - /// \~english @par Detail - /// And destruct the service of device_detection_service, which is a method for destructing a session.\n - /// (To send the command of PROTOCOL_CLOSE_SESSION_REQ to device_detection_service.)\n - /// \~english @see OpenSessionRequest - //////////////////////////////////////////////////////////////////////////////////// - EFrameworkunifiedStatus CloseSessionRequest(); - - ///////////////////////////////////////////////////////////////////////////////////// - /// \ingroup DetachDeviceDetectionAvailabilityCb - /// \~english @par Summary - /// API to release the Callback function for Availability notification of Device Detection Service. - /// \~english @param None - /// \~english @retval eFrameworkunifiedStatusOK Success - /// \~english @retval eFrameworkunifiedStatusInvldParam Invalid parameter - /// \~english @retval eFrameworkunifiedStatusInvldHandle Invalid handle - /// \~english @retval eFrameworkunifiedStatusInvldHndlType Invalid type of handle - /// \~english @retval eFrameworkunifiedStatusMsgQFull Message queue is full - /// \~english @retval eFrameworkunifiedStatusErrNoEBADF Invalid File-Descriptor - /// \~english @retval eFrameworkunifiedStatusErrNoEINTR An interrupt is generated by the system call (signal) - /// \~english @retval eFrameworkunifiedStatusInvldBufSize Invalid buffer-size - /// \~english @retval eFrameworkunifiedStatusFail Some sort of error occurred - /// \~english @retval eFrameworkunifiedStatusErrOther Other error has occurred(Cannot access shared memory, etc.) - /// \~english @par Preconditions - /// - Generation/initialization of Dispatcher for the Application (FrameworkunifiedCreateDispatcherWithoutLoop etc) \n - /// has been done, and Availability of Device Detection Service is TRUE. - /// - The call-back function for Availability notification has been registered. - /// \~english @par Change of the internal state - /// - The internal state is not changed. - /// \~english @par Causes of failures - /// - HANDLES in the class member variables (m_hApp) is NULL. [eFrameworkunifiedStatusInvldHandle] - /// - Can not get the App/Thread name from HANDLE in the class member variables (m_hApp). - /// [eFrameworkunifiedStatusInvldHandle] - /// - HANDLE (m_hApp) in the class member variables are not appropriate(which is invalid). - /// [eFrameworkunifiedStatusInvldParam] - /// - Can not be acquired memory in the acquisition of the buffer of the message for transmission (malloc). - /// [eFrameworkunifiedStatusFail] - /// - Message queue HANDLE is NULL in the HANDLE of the class member variables (m_hApp). [eFrameworkunifiedStatusInvldParam] - /// - Message queue HANDLE in HANDLE (m_hApp) of the class member variables are not appropriate(which is - /// invalid). [eFrameworkunifiedStatusInvldParam] - /// - It is not appropriate message queue name of HANDLE (m_hApp) in the class member variables(The name is - /// NULL, more than 20byte). [eFrameworkunifiedStatusInvldHandle] - /// - Is not a transmission type message queue type of HANDLE (m_hApp) in the class member variables. - /// [eFrameworkunifiedStatusInvldHndlType] - /// - Callback function for Availability notification is not registered. [eFrameworkunifiedStatusFail] - /// - Session message queue is full to SS_DeviceDetectionService. [eFrameworkunifiedStatusMsgQFull] - /// - It is invalid transmission file descriptor of the session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusErrNoEBADF] - /// - Interruption by the system call (signal) has occurred during the transmission of the session message for - /// SS_DeviceDetectionService. [eFrameworkunifiedStatusErrNoEINTR] - /// - Incorrect size of the transmit buffer of the session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusInvldBufSize] - /// - Any errors occur during the transmission of a session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusFail] - /// - It failed to shared memory access for transmission of the session message for SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusErrOther] - /// \~english @par Classification - /// Public - /// \~english @par Type - /// Sync only(None communication) - /// \~english @par Detail - /// Is a method for releasing a Callback function registered to receive the timing \n - /// initialization is completed device_detection_service - /// (Native Service of API: Use the FrameworkunifiedUnsubscribeNotificationWithCallback, to release \n - /// a Callback function for Availability notification of Device Detection Service.) - /// \~english @see NotifyOnDeviceDetectionAvailability - //////////////////////////////////////////////////////////////////////////////////// - EFrameworkunifiedStatus DetachDeviceDetectionAvailabilityCb(); - - ///////////////////////////////////////////////////////////////////////////////////// - /// \ingroup DetachOpenSessionAckCb - /// \~english @par Summary - /// API to release the Callback function for OpenSessionRequest response from the Device Detection Service. - /// \~english @param None - /// \~english @retval eFrameworkunifiedStatusOK Success - /// \~english @retval eFrameworkunifiedStatusInvldParam Invalid parameter - /// \~english @retval eFrameworkunifiedStatusInvldHandle Invalid handle - /// \~english @retval eFrameworkunifiedStatusFail Some sort of error occurred - /// \~english @par Preconditions - /// - Generation/initialization of Dispatcher for the Application (FrameworkunifiedCreateDispatcherWithoutLoop etc) \n - /// has been done. - /// \~english @par Change of the internal state - /// - The internal state is not changed. - /// \~english @par Causes of failures - /// - HANDLES in the class member variables (m_hApp) is NULL. [eFrameworkunifiedStatusInvldHandle] - /// - HANDLE (m_hApp) in the class member variables are not appropriate(which is invalid). - /// [eFrameworkunifiedStatusInvldParam] - /// - Not Callback function information of the release target is present. [eFrameworkunifiedStatusFail] - /// \~english @par Classification - /// Public - /// \~english @par Type - /// Sync only(None communication) - /// \~english @par Detail - /// To cancel the Callback function for receiving a response of completion of OpenSessionRequest from - /// Dispatcher. \n - /// (Native Service of API: Use the FrameworkunifiedDetachCallbackFromDispatcher, to cancel a Callback function for receiving - /// \n - /// a response of completion of OpenSessionRequest from Dispatcher.) \n - /// \~english @see NotifyOnOpenSessionAck - //////////////////////////////////////////////////////////////////////////////////// - EFrameworkunifiedStatus DetachOpenSessionAckCb(); - - ///////////////////////////////////////////////////////////////////////////////////// - /// \ingroup DetachCloseSessionAckCb - /// \~english @par Summary - /// API to release the Callback function for CloseSessionRequest response from the Device Detection Service. - /// \~english @param None - /// \~english @retval eFrameworkunifiedStatusOK Success - /// \~english @retval eFrameworkunifiedStatusInvldParam Invalid parameter - /// \~english @retval eFrameworkunifiedStatusInvldHandle Invalid handle - /// \~english @retval eFrameworkunifiedStatusFail Some sort of error occurred - /// \~english @par Preconditions - /// - Generation/initialization of Dispatcher for the Application (FrameworkunifiedCreateDispatcherWithoutLoop etc) \n - /// has been done. - /// \~english @par Change of the internal state - /// - The internal state is not changed. - /// \~english @par Causes of failures - /// - HANDLES in the class member variables (m_hApp) is NULL. [eFrameworkunifiedStatusInvldHandle] - /// - HANDLE (m_hApp) in the class member variables are not appropriate(which is invalid). - /// [eFrameworkunifiedStatusInvldParam] - /// - Not Callback function information of the release target is present. [eFrameworkunifiedStatusFail] - /// \~english @par Classification - /// Public - /// \~english @par Type - /// Sync only(None communication) - /// \~english @par Detail - /// To cancel the Callback function for receiving a response of completion of CloseSessionRequest from - /// Dispatcher. \n - /// (Native Service of API: Use the FrameworkunifiedDetachCallbackFromDispatcher, to cancel a Callback function for receiving - /// \n - /// a response of completion of CloseSessionRequest from Dispatcher.) \n - /// \~english @see NotifyOnCloseSessionAck - //////////////////////////////////////////////////////////////////////////////////// - EFrameworkunifiedStatus DetachCloseSessionAckCb(); - - ///////////////////////////////////////////////////////////////////////////////////// - /// \ingroup MountSD - /// \~english @par Summary - /// API to mount the specified SD partition - /// \~english @param [in] part_num - /// uint8_t - Partition number of SD card(From 0 to 3) - /// \~english @param [out] already_mounted - /// BOOL* - Mount existence result - /// \~english @par - /// - TRUE : Already mount - /// - FALSE : Mount request is accepted. Wait for mount notification. - /// \~english @retval eFrameworkunifiedStatusOK Success - /// \~english @retval eFrameworkunifiedStatusInvldParam Invalid parameter - /// \~english @retval eFrameworkunifiedStatusInvldHandle Invalid handle - /// \~english @retval eFrameworkunifiedStatusNullPointer Invalid pointer - /// \~english @retval eFrameworkunifiedStatusInvldHndlType Invalid type of handle - /// \~english @retval eFrameworkunifiedStatusMsgQFull Message queue is full - /// \~english @retval eFrameworkunifiedStatusErrNoEBADF Invalid File-Descriptor - /// \~english @retval eFrameworkunifiedStatusErrNoEINTR An interrupt is generated by the system call (signal) - /// \~english @retval eFrameworkunifiedStatusInvldBufSize Invalid buffer-size - /// \~english @retval eFrameworkunifiedStatusFail Some sort of error occurred - /// \~english @retval eFrameworkunifiedStatusAccessError Access error occurred - /// \~english @retval eFrameworkunifiedStatusErrOther Other error has occurred(Cannot access shared memory, etc.) - /// \~english @par Preconditions - /// - SS_DeviceDetectionService process has been started. - /// - Generation/initialization of Dispatcher for the Application (FrameworkunifiedCreateDispatcherWithoutLoop etc) \n - /// has been done, and Availability of Device Detection Service is TRUE. - /// \~english @par Change of the internal state - /// - The internal state is not changed. - /// \~english @par Causes of failures - /// - HANDLES in the class member variables (m_hSession) is NULL. [eFrameworkunifiedStatusInvldHandle] - /// - SD card partition number (part_num) exceeds the 3 specified by the argument. [eFrameworkunifiedStatusInvldParam] - /// - Can not have access to the device file for the SD. [eFrameworkunifiedStatusAccessError] - /// - HANDLE (m_hSession) in the class member variables are not appropriate(which is invalid). - /// [eFrameworkunifiedStatusNullPointer] - /// - Message queue HANDLE is NULL in the HANDLE of the class member variables (m_hSession). - /// [eFrameworkunifiedStatusInvldHandle] - /// - HANDLE in the class member variables (m_hSession) in the message queue name is NULL. - /// [eFrameworkunifiedStatusInvldHandle] - /// - Message queue HANDLE in HANDLE (m_hSession) of the class member variables are not appropriate(which is - /// invalid). [eFrameworkunifiedStatusInvldHandle] - /// - It is not appropriate message queue name of HANDLE (m_hSession) in the class member variables(The name is - /// NULL, more than 20byte). [eFrameworkunifiedStatusInvldHandle] - /// - Is not a transmission type message queue type of HANDLE (m_hSession) in the class member variables. - /// [eFrameworkunifiedStatusInvldHndlType] - /// - Session message queue is full to SS_DeviceDetectionService. [eFrameworkunifiedStatusMsgQFull] - /// - It is invalid transmission file descriptor of the session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusErrNoEBADF] - /// - Interruption by the system call (signal) has occurred during the transmission of the session message for - /// SS_DeviceDetectionService. [eFrameworkunifiedStatusErrNoEINTR] - /// - Incorrect size of the transmit buffer of the session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusInvldBufSize] - /// - Any errors occur during the transmission of a session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusFail] - /// - It failed to shared memory access for transmission of the session message for SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusErrOther] - /// \~english @par Classification - /// Public - /// \~english @par Type - /// Method only - /// \~english @par Detail - /// The API is a method used to mount the specified partition (area).\n - /// The target device is an SD card. - /// Service(Thread) to call this method is not limited. Therefore, \n - /// to be utilized as a mismatch does not occur between the service \n - /// to use the SD card. \n - /// SD card in the specified partition, already returned eFrameworkunifiedStatusOK \n - /// if mount existence results (already_mounted) in the TRUE that is mounted.\n - /// If it is not already mounted mount existence results (already_mounted) \n - /// and to FALSE, then carry out the SD of the mount request to Device \n - /// Detection Service. - /// \~english @see UmountSD, RegisterForDeviceDetectionEvent - //////////////////////////////////////////////////////////////////////////////////// - EFrameworkunifiedStatus MountSD(uint8_t part_num, BOOL *already_mounted); - - ///////////////////////////////////////////////////////////////////////////////////// - /// \ingroup UmountSD - /// \~english @par Summary - /// API to mount the specified SD partition - /// \~english @param [in] part_num - /// uint8_t - Partition number of SD card(From 0 to 3) - /// \~english @param [out] already_umounted - /// BOOL* - Mount existence result - /// \~english @par - /// - TRUE : Already umount - /// - FALSE : Umount request is accepted. Wait for umount notification. - /// \~english @retval eFrameworkunifiedStatusOK Success - /// \~english @retval eFrameworkunifiedStatusInvldParam Invalid parameter - /// \~english @retval eFrameworkunifiedStatusInvldHandle Invalid handle - /// \~english @retval eFrameworkunifiedStatusNullPointer Invalid pointer - /// \~english @retval eFrameworkunifiedStatusInvldHndlType Invalid type of handle - /// \~english @retval eFrameworkunifiedStatusMsgQFull Message queue is full - /// \~english @retval eFrameworkunifiedStatusErrNoEBADF Invalid File-Descriptor - /// \~english @retval eFrameworkunifiedStatusErrNoEINTR An interrupt is generated by the system call (signal) - /// \~english @retval eFrameworkunifiedStatusInvldBufSize Invalid buffer-size - /// \~english @retval eFrameworkunifiedStatusFail Some sort of error occurred - /// \~english @retval eFrameworkunifiedStatusAccessError Access error occurred - /// \~english @retval eFrameworkunifiedStatusErrOther Other error has occurred(Cannot access shared memory, etc.) - /// \~english @par Preconditions - /// - SS_DeviceDetectionService process has been started. - /// - Generation/initialization of Dispatcher for the Application (FrameworkunifiedCreateDispatcherWithoutLoop etc) \n - /// has been done, and Availability of Device Detection Service is TRUE. - /// \~english @par Change of the internal state - /// - The internal state is not changed. - /// \~english @par Causes of failures - /// - HANDLES in the class member variables (m_hSession) is NULL. [eFrameworkunifiedStatusInvldHandle] - /// - SD card partition number (part_num) exceeds the 3 specified by the argument. [eFrameworkunifiedStatusInvldParam] - /// - Can not have access to the device file for the SD. [eFrameworkunifiedStatusAccessError] - /// - HANDLE (m_hSession) in the class member variables are not appropriate(which is invalid). - /// [eFrameworkunifiedStatusNullPointer] - /// - Message queue HANDLE is NULL in the HANDLE of the class member variables (m_hSession). - /// [eFrameworkunifiedStatusInvldHandle] - /// - HANDLE in the class member variables (m_hSession) in the message queue name is NULL. - /// [eFrameworkunifiedStatusInvldHandle] - /// - Message queue HANDLE in HANDLE (m_hSession) of the class member variables are not appropriate(which is - /// invalid). [eFrameworkunifiedStatusInvldHandle] - /// - It is not appropriate message queue name of HANDLE (m_hSession) in the class member variables(The name is - /// NULL, more than 20byte). [eFrameworkunifiedStatusInvldHandle] - /// - Is not a transmission type message queue type of HANDLE (m_hSession) in the class member variables. - /// [eFrameworkunifiedStatusInvldHndlType] - /// - Session message queue is full to SS_DeviceDetectionService. [eFrameworkunifiedStatusMsgQFull] - /// - It is invalid transmission file descriptor of the session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusErrNoEBADF] - /// - Interruption by the system call (signal) has occurred during the transmission of the session message for - /// SS_DeviceDetectionService. [eFrameworkunifiedStatusErrNoEINTR] - /// - Incorrect size of the transmit buffer of the session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusInvldBufSize] - /// - Any errors occur during the transmission of a session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusFail] - /// - It failed to shared memory access for transmission of the session message for SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusErrOther] - /// \~english @par Classification - /// Public - /// \~english @par Type - /// Method only - /// \~english @par Detail - /// The API is a method used to mount the specified partition (area).\n - /// The target device is an SD card. - /// Service(Thread) to call this method is not limited. Therefore, \n - /// to be utilized as a mismatch does not occur between the service \n - /// to use the SD card. \n - /// SD card in the specified partition, already returned eFrameworkunifiedStatusOK \n - /// if unmount existence results (already_unmounted) in the TRUE that is unmounted. - /// If it is not already unmounted unmount existence results (already_unmounted) \n - /// and to FALSE, then carry out the SD of the unmount request to Device \n - /// Detection Service. \n - /// That all of the services specifically, to call this API after the close \n - /// completion of the directory and file of the SD card. \n - /// Also, do not call this API in a state in which a directory on the SD card \n - /// in the current directory. (At SD drive processing threads in SS_DeviceDetectionService, \n - /// umount fails, error of SS_DEV_ERR_BUSY is returned as an asynchronous notification \n - /// events.) - /// \~english @see MountSD, RegisterForDeviceDetectionEvent - //////////////////////////////////////////////////////////////////////////////////// - EFrameworkunifiedStatus UmountSD(uint8_t part_num, BOOL *already_umounted); - - ///////////////////////////////////////////////////////////////////////////////////// - /// \ingroup UsbVBusReset - /// \~english @par Summary - /// API to reset the VBUS of the specified USB port - /// \~english @param [in] port - /// uint8_t - USB port number - /// \~english @param [in] inteval - /// uint8_t - interval (interval * 100 [msec]) - /// \~english @retval eFrameworkunifiedStatusOK Success - /// \~english @retval eFrameworkunifiedStatusInvldParam Invalid parameter - /// \~english @retval eFrameworkunifiedStatusInvldHandle Invalid handle - /// \~english @retval eFrameworkunifiedStatusNullPointer Invalid pointer - /// \~english @retval eFrameworkunifiedStatusInvldHndlType Invalid type of handle - /// \~english @retval eFrameworkunifiedStatusMsgQFull Message queue is full - /// \~english @retval eFrameworkunifiedStatusErrNoEBADF Invalid File-Descriptor - /// \~english @retval eFrameworkunifiedStatusErrNoEINTR An interrupt is generated by the system call (signal) - /// \~english @retval eFrameworkunifiedStatusInvldBufSize Invalid buffer-size - /// \~english @retval eFrameworkunifiedStatusFail Some sort of error occurred - /// \~english @retval eFrameworkunifiedStatusErrOther Other error has occurred(Cannot access shared memory, etc.) - /// \~english @par Preconditions - /// - SS_DeviceDetectionService process has been started. - /// - Generation/initialization of Dispatcher for the Application (FrameworkunifiedCreateDispatcherWithoutLoop etc) \n - /// has been done, and Availability of Device Detection Service is TRUE. - /// - Checking USB port number should be done before calling this API. - /// \~english @par Change of the internal state - /// - The internal state is not changed. - /// \~english @par Causes of failures - /// - HANDLES in the class member variables (m_hSession) is NULL. [eFrameworkunifiedStatusInvldHandle] - /// - Environment variable (TARGET_BOARD) is not defined. [eFrameworkunifiedStatusFail] - /// [eFrameworkunifiedStatusInvldParam] - /// - Name of the target board in the environment variable (TARGET_BOARD) is not correct. [eFrameworkunifiedStatusInvldParam] - /// - HANDLE (m_hSession) in the class member variables are not appropriate(which is invalid). - /// [eFrameworkunifiedStatusNullPointer] - /// - Message queue HANDLE is NULL in the HANDLE of the class member variables (m_hSession). - /// [eFrameworkunifiedStatusInvldHandle] - /// - HANDLE in the class member variables (m_hSession) in the message queue name is NULL. - /// [eFrameworkunifiedStatusInvldHandle] - /// - Message queue HANDLE in HANDLE (m_hSession) of the class member variables are not appropriate(which is - /// invalid). [eFrameworkunifiedStatusInvldHandle] - /// - It is not appropriate message queue name of HANDLE (m_hSession) in the class member variables(The name is - /// NULL, more than 20byte). [eFrameworkunifiedStatusInvldHandle] - /// - Is not a transmission type message queue type of HANDLE (m_hSession) in the class member variables. - /// [eFrameworkunifiedStatusInvldHndlType] - /// - Session message queue is full to SS_DeviceDetectionService. [eFrameworkunifiedStatusMsgQFull] - /// - It is invalid transmission file descriptor of the session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusErrNoEBADF] - /// - Interruption by the system call (signal) has occurred during the transmission of the session message for - /// SS_DeviceDetectionService. [eFrameworkunifiedStatusErrNoEINTR] - /// - Incorrect size of the transmit buffer of the session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusInvldBufSize] - /// - Any errors occur during the transmission of a session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusFail] - /// - It failed to shared memory access for transmission of the session message for SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusErrOther] - /// \~english @par Classification - /// Public - /// \~english @par Type - /// Fire and Forget only - /// \~english @par Detail - /// The API is a method for resetting the VBUS of the specified USB port.\n - /// Environment variable (TARGET_BOARD) is defined in the configure options \n - /// specified at the time of build. \n - /// (Example. TARGET_BOARD:_CWORD71__CWORD91__e2_na_t__CWORD84_2__CWORD71_) \n - /// Before reset USB port for DCM, the device files(dcm_acm, dcm_vc, dcm_wdm) \n - /// related to DCM-related must be closed. \n - /// *) Device file may not be created correctly when the process of Disconnect/Connect \n - /// without closing to work. - /// \~english @see None - //////////////////////////////////////////////////////////////////////////////////// - EFrameworkunifiedStatus UsbVBusReset(int8_t port); - EFrameworkunifiedStatus UsbVBusReset(int8_t port, uint8_t interval); - - ///////////////////////////////////////////////////////////////////////////////////// - /// \ingroup RoleSwStateNotify - /// \~english @par Summary - /// API to notify RoleSW state - /// \~english @param [in] state - /// SS_DEV_ROLE_SW_STATE - RoleSW state - /// \~english @par - /// enum variable SS_DEV_ROLE_SW_STATE - /// - SS_DEV_ROLE_SW_START : Start - /// - SS_DEV_ROLE_SW_BEGIN_END : Beginning of End - /// - SS_DEV_ROLE_SW_END : End - /// - SS_DEV_ROLE_SW_RESTART : Restart - /// \~english @retval eFrameworkunifiedStatusOK Success - /// \~english @retval eFrameworkunifiedStatusInvldHandle Invalid handle - /// \~english @retval eFrameworkunifiedStatusNullPointer Invalid pointer - /// \~english @retval eFrameworkunifiedStatusInvldHndlType Invalid type of handle - /// \~english @retval eFrameworkunifiedStatusInvldQName Invalid Message Queue Name - /// \~english @retval eFrameworkunifiedStatusMsgQFull Message queue is full - /// \~english @retval eFrameworkunifiedStatusErrNoEBADF Invalid File-Descriptor - /// \~english @retval eFrameworkunifiedStatusErrNoEINTR An interrupt is generated by the system call (signal) - /// \~english @retval eFrameworkunifiedStatusInvldBufSize Invalid buffer-size - /// \~english @retval eFrameworkunifiedStatusFail Some sort of error occurred - /// \~english @retval eFrameworkunifiedStatusBadConnection It can not be a socket connection - /// \~english @retval eFrameworkunifiedStatusErrOther Other error has occurred(Cannot access shared memory, etc.) - /// \~english @par Preconditions - /// - SS_DeviceDetectionService process has been started. - /// - Generation/initialization of Dispatcher for the Application (FrameworkunifiedCreateDispatcherWithoutLoop etc) \n - /// has been done, and Availability of Device Detection Service is TRUE. - /// \~english @par Change of the internal state - /// - The internal state is not changed. - /// \~english @par Causes of failures - /// - HANDLES in the class member variables (m_hSession) is NULL. [eFrameworkunifiedStatusInvldHandle] - /// - HANDLE (m_hSession) in the class member variables are not appropriate(which is invalid). - /// [eFrameworkunifiedStatusNullPointer] - /// - It failed to open the message queue for messages received from SS_DeviceDetectionService. [eFrameworkunifiedStatusFail] - /// - It failed to buffer acquisition for messages received from SS_DeviceDetectionService(malloc failure). - /// [eFrameworkunifiedStatusFail] - /// - It failed to create a sequence ID of the message to be sent to the SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusFail] - /// - Message queue HANDLE is NULL in the HANDLE of the class member variables (m_hSession). - /// [eFrameworkunifiedStatusInvldHandle] - /// - HANDLE in the class member variables (m_hSession) in the message queue name is NULL. - /// [eFrameworkunifiedStatusInvldHandle] - /// - Message queue HANDLE name in the HANDLE (m_hSession) in the class member variables is NULL. - /// [eFrameworkunifiedStatusInvldQName] - /// - Message queue HANDLE name in the HANDLE (hService) in the class member variables exceeds 20byte. - /// [eFrameworkunifiedStatusInvldQName] - /// - Message queue HANDLE in HANDLE (m_hSession) of the class member variables are not appropriate(which is - /// invalid). [eFrameworkunifiedStatusInvldHandle] - /// - It is not appropriate message queue name of HANDLE (m_hSession) in the class member variables(The name is - /// NULL, more than 20byte). [eFrameworkunifiedStatusInvldHandle] - /// - Is not a transmission type message queue type of HANDLE (m_hSession) in the class member variables. - /// [eFrameworkunifiedStatusInvldHndlType] - /// - Session message queue is full to SS_DeviceDetectionService. [eFrameworkunifiedStatusMsgQFull] - /// - It is invalid send and receive file descriptor of the session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusErrNoEBADF] - /// - Interruption by the system call (signal) has occurred during the send and receive of the session message - /// for SS_DeviceDetectionService. [eFrameworkunifiedStatusErrNoEINTR] - /// - Incorrect size of the send and receive buffer of the session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusInvldBufSize] - /// - Any errors occur during the send and receive of a session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusFail] - /// - It failed to shared memory access for send and receive of the session message for - /// SS_DeviceDetectionService. [eFrameworkunifiedStatusErrOther] - /// - It failed to connect to the socket for the response message to be received from SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusFail] - /// - It failed to wait control of the response message received from SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusFail] - /// - Interruption by the system call (signal) has occurred in wait in the response message received from - /// SS_DeviceDetectionService. [eFrameworkunifiedStatusFail] - /// - After the failure at the time of the response message received from SS_DeviceDetectionService, it failed - /// to re-connection of the Socket. [eFrameworkunifiedStatusBadConnection] - /// \~english @par Classification - /// Public - /// \~english @par Type - /// Sync x Method - /// \~english @par Detail - /// By executing this API, Device Detection Service recognizes the state \n - /// has been switched from the USB Host due to RoleSW to USB Function. \n - /// The initial state of Detection is a state(SS_DEV_ROLE_SW_END:End state) \n - /// that has not been RoleSW. \n - /// (It is a state that accepts a SS_DEV_ROLE_SW_START:Start.) - /// \~english @see None - //////////////////////////////////////////////////////////////////////////////////// - EFrameworkunifiedStatus RoleSwStateNotify(SS_DEV_ROLE_SW_STATE state); - - ///////////////////////////////////////////////////////////////////////////////////// - /// \ingroup FormatSD - /// \~english @par Summary - /// API to Format SD - /// \~english @param None - /// \~english @retval eFrameworkunifiedStatusOK Success - /// \~english @retval eFrameworkunifiedStatusInvldHandle Invalid handle - /// \~english @retval eFrameworkunifiedStatusNullPointer Invalid pointer - /// \~english @retval eFrameworkunifiedStatusInvldHndlType Invalid type of handle - /// \~english @retval eFrameworkunifiedStatusMsgQFull Message queue is full - /// \~english @retval eFrameworkunifiedStatusErrNoEBADF Invalid File-Descriptor - /// \~english @retval eFrameworkunifiedStatusErrNoEINTR An interrupt is generated by the system call (signal) - /// \~english @retval eFrameworkunifiedStatusInvldBufSize Invalid buffer-size - /// \~english @retval eFrameworkunifiedStatusFail Some sort of error occurred - /// \~english @retval eFrameworkunifiedStatusAccessError Access error occurred - /// \~english @retval eFrameworkunifiedStatusBadConnection It can not be a socket connection - /// \~english @retval eFrameworkunifiedStatusErrOther Other error has occurred(Cannot access shared memory, etc.) - /// \~english @par Preconditions - /// - SS_DeviceDetectionService process has been started. - /// - Generation/initialization of Dispatcher for the Application (FrameworkunifiedCreateDispatcherWithoutLoop etc) \n - /// has been done, and Availability of Device Detection Service is TRUE. - /// \~english @par Change of the internal state - /// - The internal state is not changed. - /// \~english @par Causes of failures - /// - HANDLES in the class member variables (m_hSession) is NULL. [eFrameworkunifiedStatusInvldHandle] - /// - Can not have access to the device file for the SD. [eFrameworkunifiedStatusAccessError] - /// - HANDLE (m_hSession) in the class member variables are not appropriate(which is invalid). - /// [eFrameworkunifiedStatusNullPointer] - /// - Message queue HANDLE is NULL in the HANDLE of the class member variables (m_hSession). - /// [eFrameworkunifiedStatusInvldHandle] - /// - HANDLE in the class member variables (m_hSession) in the message queue name is NULL. - /// [eFrameworkunifiedStatusInvldHandle] - /// - Message queue HANDLE in HANDLE (m_hSession) of the class member variables are not appropriate(which is - /// invalid). [eFrameworkunifiedStatusInvldHandle] - /// - It is not appropriate message queue name of HANDLE (m_hSession) in the class member variables(The name is - /// NULL, more than 20byte). [eFrameworkunifiedStatusInvldHandle] - /// - Is not a transmission type message queue type of HANDLE (m_hSession) in the class member variables. - /// [eFrameworkunifiedStatusInvldHndlType] - /// - Session message queue is full to SS_DeviceDetectionService. [eFrameworkunifiedStatusMsgQFull] - /// - It is invalid transmission file descriptor of the session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusErrNoEBADF] - /// - Interruption by the system call (signal) has occurred during the transmission of the session message for - /// SS_DeviceDetectionService. [eFrameworkunifiedStatusErrNoEINTR] - /// - Incorrect size of the transmit buffer of the session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusInvldBufSize] - /// - Any errors occur during the transmission of a session message to SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusFail] - /// - It failed to shared memory access for transmission of the session message for SS_DeviceDetectionService. - /// [eFrameworkunifiedStatusErrOther] - /// \~english @par Detail - /// The SD card inserted into the _CWORD84_ side in this API is formatted in compliance with the SD standard.\n - /// A result of format implementation is notified by SS_DEV_INFO_SD_FORMAT_COMP_EV events.\n - /// String pickled notification content and the result is as follows.\n - /// - SS_DEV_OK : Format success \n - /// - SS_DEV_ERR_BUSY : For unmount unexecuted, format failure \n - /// - SS_DEV_ERR : Format fails for any other factors - /// \~english @par Classification - /// Public - /// \~english @par Type - /// Method x Method - /// \~english @par - /// This API is able to call after the SD card umount completion and the device file close of \n - /// SD card is complete.\n - /// If the SD card umount of has not been completed, SS_DEV_ERR_BUSY is notified.\n - /// If the device file of the SD card has not been close, although it is the format becomes \n - /// the operation completed, there can be no assurance of the operation. - /// \~english @see MountSD, UmountSD, RegisterForDeviceDetectionEvent - //////////////////////////////////////////////////////////////////////////////////// - EFrameworkunifiedStatus FormatSD(void); - - private: - HANDLE OpenService(); - UI_8 Crc7Checksum(UI_8 *data, UI_8 sz); - HANDLE m_hApp; - HANDLE m_hService; - HANDLE m_hSession; - BOOL CheckDetectEvent(SS_DeviceDetectionServerEvents f_eDevDetectEvent); -}; - -#endif /* SS_DEVICE_DETECTION_SERVICE_IFC_H_ */ // NOLINT (build/header_guard) - -/** @}*/ // end of device_manager -/** @}*/ // end of device_detection_service -/** @}*/ // end of system_service -/** @}*/ // end of BaseSystem -- cgit 1.2.3-korg