/*
 * Copyright (c) 2015-2016 ARM Limited
 * All rights reserved
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met: redistributions of source code must retain the above copyright
 * notice, this list of conditions and the following disclaimer;
 * redistributions in binary form must reproduce the above copyright
 * notice, this list of conditions and the following disclaimer in the
 * documentation and/or other materials provided with the distribution;
 * neither the name of the copyright holders nor the names of its
 * contributors may be used to endorse or promote products derived from
 * this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * Authors: Andreas Sandberg
 */

/dts-v1/;

/memreserve/ 0x80000000 0x00010000;

/include/ "vexpress_gem5_v2.dtsi"

/ {
	model = "V2P-AARCH64";
	compatible = "arm,vexpress,v2p-aarch64", "arm,vexpress";

	memory@80000000 {
		device_type = "memory";
		reg = <0 0x80000000 0x4 0x00000000>;
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

        cpu@0 {
            device_type = "cpu";
            compatible = "gem5,armv8", "arm,armv8";
            reg = < 0 >;
            enable-method = "spin-table";
            cpu-release-addr = <0 0x8000fff8>;
        };

        cpu@1 {
            device_type = "cpu";
            compatible = "gem5,armv8", "arm,armv8";
            reg = < 1 >;
            enable-method = "spin-table";
            cpu-release-addr = <0 0x8000fff8>;
        };

        cpu@2 {
            device_type = "cpu";
            compatible = "gem5,armv8", "arm,armv8";
            reg = < 2 >;
            enable-method = "spin-table";
            cpu-release-addr = <0 0x8000fff8>;
        };

        cpu@3 {
            device_type = "cpu";
            compatible = "gem5,armv8", "arm,armv8";
            reg = < 3 >;
            enable-method = "spin-table";
            cpu-release-addr = <0 0x8000fff8>;
        };

        cpu@4 {
            device_type = "cpu";
            compatible = "gem5,armv8", "arm,armv8";
            reg = < 4 >;
            enable-method = "spin-table";
            cpu-release-addr = <0 0x8000fff8>;
        };

        cpu@5 {
            device_type = "cpu";
            compatible = "gem5,armv8", "arm,armv8";
            reg = < 5 >;
            enable-method = "spin-table";
            cpu-release-addr = <0 0x8000fff8>;
        };

        cpu@6 {
            device_type = "cpu";
            compatible = "gem5,armv8", "arm,armv8";
            reg = < 6 >;
            enable-method = "spin-table";
            cpu-release-addr = <0 0x8000fff8>;
        };

        cpu@7 {
            device_type = "cpu";
            compatible = "gem5,armv8", "arm,armv8";
            reg = < 7 >;
            enable-method = "spin-table";
            cpu-release-addr = <0 0x8000fff8>;
        };

	};

	virt-encoder {
		compatible = "drm,virtual-encoder";
		port {
			dp0_virt_input: endpoint@0 {
				remote-endpoint = <&dp0_output>;
			};
		};

		display-timings {
			native-mode = <&timing0>;

			timing0: timing_1080p60 {
				/* 1920x1080-60 */
				clock-frequency = <148500000>;
				hactive = <1920>;
				vactive = <1080>;
				hfront-porch = <148>;
				hback-porch = <88>;
				hsync-len = <44>;
				vfront-porch = <36>;
				vback-porch = <4>;
				vsync-len = <5>;
			};
		};
	};
};

&dp0 {
	status = "ok";

	port {
		dp0_output: endpoint@0 {
			remote-endpoint = <&dp0_virt_input>;
		};
	};
};