Updating File name and links in the documentationoctopus_14.92.0octopus_14.91.0octopus/14.92.0octopus/14.91.014.92.014.91.0

Updating documentation:
1. Renamed all the files and folder following 01-99 index numbering
2. Matched title name and file name
3. Inserted title in the files where ever missing
4. Updated all the reference links in the documentation

Bug-AGL: [SPEC-4470]
Signed-off-by: Vinod Ahuja <vahuja@unomaha.edu>
Change-Id: Ib73e1f91107646e11b5b19ab6ead4080add506e4
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/documentation/+/28170
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>

14 files changed, 0 insertions, 1232 deletions

diff --git a/docs/7_How_To_Contribute/1_Getting_Linux_Foundation_account.md b/docs/7_How_To_Contribute/1_Getting_Linux_Foundation_account.md
deleted file mode 100644
index f2b2cb7..0000000
--- a/docs/7_How_To_Contribute/1_Getting_Linux_Foundation_account.md
+++ /dev/null
@@ -1,98 +0,0 @@
----
-title: Getting Linux Foundation account
----
-
-In order to participate in the development of the Automotive Grade Linux
-project, you will need a Linux Foundation account. You will need to use
-your LF ID to access to all the AGL community development tools,
-including [Gerrit](http://gerrit.automotivelinux.org/),
-[Jira](https://jira.automotivelinux.org/) and the
-[Wiki](https://wiki.automotivelinux.org/) (for editing, only).
-
-**NOTE:** Further information about Contributing to the AGL Distro
-available at [AGL wiki](https://wiki.automotivelinux.org/agl-distro/contributing).
-
-## Creating Linux Foundation ID
-
- 1. Go to the [Linux Foundation ID website](https://identity.linuxfoundation.org/).
-
- 2. Select the option `I need to create a Linux Foundation ID`, and fill
- out the form that appears. (It is advised to authenticate through email
- instead of logging through Facebook/Google/Github.)
-
- 3. Wait a few minutes, then look for an email message with the subject
- line: `Validate your Linux Foundation ID email`.
-
- 4. Open the received URL to validate your email address.
-
- 5. Verify that your browser displays the message  ``You have
- successfully validated your e-mail address``.
-
- 6. Access [Gerrit](http://gerrit.automotivelinux.org/) by selecting
- ``Sign In``, and use your new Linux Foundation account ID to sign in.
-
-## Configuring Gerrit to Use SSH
-
-Gerrit uses SSH to interact with your Git client. If you already have an SSH
-key pair, you can skip the part of this section that explains how to generate one.
-
-What follows explains how to generate an SSH key pair in a Linux environment ---
-follow the equivalent steps on your OS.
-
-First, create an SSH key pair with the command:
-**Note:** This guide recommends using ed25519 keys because it has been found that this type works well across all operating systems.
-
- ```sh
- $ ssh-keygen -t ed25519 -C "your_name@example.com"
- ```
-
-**Note:** When you’re prompted to “Enter a file in which to save the key” press Enter. This accepts the default location. Next, it will ask you for a password to protect the private key as
-it generates a unique key. Please keep this password private, and DO NOT
-enter a blank password.
-
-The generated SSH key pair can be found in the files ``~/.ssh/id_ed25519`` and
-``~/.ssh/id_ed25519.pub``.
-
-Next, add the private key in the ``id_ed25519`` file to your key ring, e.g.:
-
- ```sh
- $ ssh-add ~/.ssh/id_ed25519
- ```
-
-Finally, add the public key of the generated key pair to the Gerrit
-server, with the following steps:
-
-1. Go to [Gerrit](http://gerrit.automotivelinux.org/).
-
-2. Click on your account name in the upper right corner.
-
-3. From the pop-up menu, select ``Settings``.
-
-4. On the left side menu, click on ``SSH Public Keys``.
-
-5. Paste the contents of your public key ``~/.ssh/id_ed25519.pub`` and click
-   ``Add key``.
-
-**Note:** The ``id_ed25519.pub`` file can be opened with any text editor or you can run the command ``cat ~/.ssh/id_ed25519.pub`` in your terminal and copy output. Ensure that all the contents of the file are selected, copied and pasted into the ``Add SSH key`` window in Gerrit.
-
-**Note:** The SSH key generation instructions operate on the assumption
-that you are using the default naming. It is possible to generate
-multiple SSH keys and to name the resulting files differently. See the
-[ssh-keygen](https://en.wikipedia.org/wiki/Ssh-keygen) documentation for
-details on how to do that. Once you have generated non-default keys, you
-need to configure SSH to use the correct key for Gerrit. In that case,
-you need to create a ``~/.ssh/config`` file with command ``touch ~/.ssh/config`` and add details in config file.
-
-```
-host gerrit.automotivelinux.org
-  HostName gerrit.automotivelinux.org
-  IdentityFile ~/.ssh/id_ed25519
-  User <LFID>
-  Port 29418
-```
-
-`<LFID>` is your Linux Foundation ID(username) and the value of IdentityFile is the
-name of the public key file you generated.
-
-**Warning:** Potential Security Risk! Do not copy your private key
-``~/.ssh/id_ed25519``. Use only the public ``~/.ssh/id_ed25519.pub``.
diff --git a/docs/7_How_To_Contribute/2_Using_Jira_for_current_work_items.md b/docs/7_How_To_Contribute/2_Using_Jira_for_current_work_items.md
deleted file mode 100644
index 49b443d..0000000
--- a/docs/7_How_To_Contribute/2_Using_Jira_for_current_work_items.md
+++ /dev/null
@@ -1,30 +0,0 @@
----
-title: Using Jira for current work items
----
-
-This document has been created to give further insight into the work in progress
-towards the Automotive Grade Linux architecture based on the community roadmap.
-The requirements for the roadmap are being tracked in
-[Jira](https://jira.automotivelinux.org/).
-
-On this page you will see all the public (and restricted) boards that have been
-created. For example the **Board Name** *CI and Automated Test Expert Group*:
-
-![Jira boards](images/jira-2.png)
-
-When you click on *CI and Automated Test Expert Group* under **Board name** you
-will be directed to a page that contains the following columns:
-
-![Jira boards](images/jira-3.png)
-
-The meanings to these columns are as follows:
-
--  **NOT STARTED** – list of items slated for the current sprint (sprints are
-   defined in 2 week iterations), but are not currently in progress
--  **IN PROGRESS** – items currently being worked by someone in the community.
--  **DONE** – items merged and complete in the sprint.
-
-If there is an item you are interested in working on, want more information or
-have questions, or if there is an item that you feel needs to be in higher
-priority, please add comments directly to the Jira item. All feedback and help
-is very much appreciated.
\ No newline at end of file
diff --git a/docs/7_How_To_Contribute/3_Working_with_Gerrit.md b/docs/7_How_To_Contribute/3_Working_with_Gerrit.md
deleted file mode 100644
index ccd9133..0000000
--- a/docs/7_How_To_Contribute/3_Working_with_Gerrit.md
+++ /dev/null
@@ -1,153 +0,0 @@
----
-title: Working with Gerrit
----
-
-Follow these instructions to collaborate on AGL through the Gerrit review
-system.
-
-Please be sure that you are subscribed to the [mailing
-list](https://lists.automotivelinux.org/g/agl-dev-community) and of course, you
-can reach out on IRC at the #automotive channel on irc.libera.chat
-
-Gerrit assigns the following roles to users:
-
--  **Submitters**: May submit changes for consideration, review other code
-   changes, and make recommendations for acceptance or rejection by voting +1 or
-   -1, respectively.
--  **Maintainers**: May approve or reject changes based upon feedback from
-   reviewers voting +2 or -2, respectively.
-
-## Getting deeper into Gerrit
-
-A comprehensive walk-through of Gerrit is beyond the scope of this document.
-There are plenty of resources available on the Internet. A good summary can be
-found [here](https://www.mediawiki.org/wiki/Gerrit/Tutorial) and [Basic Gerrit
-Walkthrough for GitHub
-Users](https://gerrit-review.googlesource.com/Documentation/intro-gerrit-walkthrough-github.html).
-
-## Working with a local clone of the repository
-
-To work on something, whether a new feature or a bugfix:
-
-1. Open the Gerrit [repo
-   page](https://gerrit.automotivelinux.org/gerrit/admin/repos/).
-
-2. Select the repository you wish to work on.
-
-3. Open a terminal window and clone the project locally using the ``Clone with
-   git hook`` URL. Be sure that ``ssh`` is also selected, as this will make
-   authentication much simpler. For example, for `documentation` repository:
-
-    ```sh
-    $ git clone "ssh://<LFID>@gerrit.automotivelinux.org:29418/AGL/documentation" && scp -p -P
-    29418 <LFID>@gerrit.automotivelinux.org:hooks/commit-msg "documentation/.git/hooks/"
-    ```
-
-4. Setup `user` and `email` for git config
-
-    ```sh
-     $ cd documentation
-     $ git.config --global user.name "Your Full Name"
-     $ git config --global user.email "your@email.com"
-    ```
-
-      **NOTE:** To only configure for a particular repository :
-
-    ```sh
-     $ cd documentation
-     $ git.config user.name "Your Full Name"
-     $ git config user.email "your@email.com"
-    ```
-
-5. Create a descriptively-named branch off of your cloned repository
-
-    ```sh
-     $ git checkout -b issue-nname
-    ```
-
-## Using git review
-
-There's a **very** useful tool for working with Gerrit called
-[git-review](https://www.mediawiki.org/wiki/Gerrit/git-review). This
-command-line tool can automate most of the ensuing sections for you. Ofcourse,
-reading the information below is also highly recommended so that you understand
-what's going on behind the scenes.
-
-```sh
-# for first time use only
-$ git review -s
-```
-If `.gitreview` is missing, add the following section to ``.git/config``, and
-replace ``<LFID>`` with your LFID id.
-
-```sh
-[remote "gerrit"]
-   url = ssh://<LFID>@gerrit.automotivelinux.org:29418/AGL/documentation.git
-   fetch = +refs/heads/*:refs/remotes/gerrit/*
-```
-
-Then submit your change with ``git review``.
-
-```sh
-$ cd documentation
-$ git review
-```
-
-When you update your patch, you can commit with ``git commit --amend``, and then
-repeat the ``git review`` command.
-
-## Typical Review Workflow
-
-   - New Fresh Change
-
-      ```sh
-      $ cd documentation                              # Working Repository
-      $ git remote -v update                          # Updating wrt remote
-      $ git checkout -b mytopicbranch origin/master   # Creating new branch
-      ### CODE the CHANGES
-      $ git add  <file>                               # Track the changed files
-      $ git commit -s                                 # Signed Commit Message
-      $ git review                                    # Submit Changes to review
-      ```
-
-   - Updating existing Gerrit Review
-
-      ```sh
-      $ cd documentation                              # Working Repository
-      $ git review -d 25678                           # Download review, 25678 is change number
-      ### CODE the CHANGES
-      $ git add  <file>                               # Track the changed files
-      $ git commit -s                                 # Signed Commit Message
-      $ git review                                    # Submit Changes to review
-      $ git checkout master                           # Return to master branch
-      ```
-
-## Reviewing Using Gerrit
-
--  **Add**: This button allows the change submitter to manually add names of
-   people who should review a change; start typing a name and the system will
-   auto-complete based on the list of people registered and with access to the
-   system. They will be notified by email that you are requesting their input.
-
--  **Abandon**: This button is available to the submitter only; it allows a
-   committer to abandon a change and remove it from the merge queue.
-
--  **Change-ID**: This ID is generated by Gerrit (or system). It becomes useful
-   when the review process determines that your commit(s) have to be amended.
-   You may submit a new version; and if the same Change-ID header (and value)
-   are present, Gerrit will remember it and present it as another version of the
-   same change.
-
--  **Status**: Currently, the example change is in review status, as indicated
-   by “Needs Verified” in the upper-left corner. The list of Reviewers will all
-   emit their opinion, voting +1 if they agree to the merge, -1 if they
-   disagree. Gerrit users with a Maintainer role can agree to the merge or
-   refuse it by voting +2 or -2 respectively.
-
-Notifications are sent to the email address in your commit message's
-Signed-off-by line. Visit your [Gerrit
-dashboard](https://gerrit.automotivelinux.org/gerrit/dashboard/self), to check
-the progress of your requests.
-
-The history tab in Gerrit will show you the in-line comments and the author of
-the review.
diff --git a/docs/7_How_To_Contribute/4_Submitting_Changes.md b/docs/7_How_To_Contribute/4_Submitting_Changes.md
deleted file mode 100644
index d226450..0000000
--- a/docs/7_How_To_Contribute/4_Submitting_Changes.md
+++ /dev/null
@@ -1,68 +0,0 @@
----
-title: Submitting Changes
----
-
-Carefully review the following before submitting a change. These guidelines
-apply to developers that are new to open source, as well as to experienced open
-source developers.
-
-## Change Requirements
-
-
-This section contains guidelines for submitting code changes for review. For
-more information on how to submit a change using Gerrit, please see [Working
-with Gerrit](./3_Working_with_Gerrit.md).
-
-Changes are submitted as Git commits. Each commit must contain:
-
--  a short and descriptive subject line that is 72 characters or fewer, followed
-   by a blank line.
--  a change description with your logic or reasoning for the changes, followed
-   by a blank line
--  a Signed-off-by line, followed by a colon (Signed-off-by:)
--  a Change-Id identifier line, followed by a colon (Change-Id:). Gerrit won't
-   accept patches without this identifier.
-
-A commit with the above details is considered well-formed. [This
-page](https://chris.beams.io/posts/git-commit/) is a very useful for the same.
-
-All changes and topics sent to Gerrit must be well-formed. Informationally,
-``commit messages`` must include:
-
--  **what** the change does,
--  **why** you chose that approach, and
--  **how** you know it works -- for example, which tests you ran.
-
-For example: One commit fixes whitespace issues, another renames a function and
-a third one changes the code's functionality. An example commit file is
-illustrated below in detail:
-
-```sh
-
-A short description of your change with no period at the end
-
-You can add more details here in several paragraphs, but please keep each line
-width less than 80 characters. A bug fix should include the issue number.
-
-Bug-AGL: [SPEC-<JIRA-ID>]
-Change-Id: IF7b6ac513b2eca5f2bab9728ebd8b7e504d3cebe1
-Signed-off-by: Your Name <commit-sender@email.address>
-```
-
-Include the issue ID in the one line description of your commit message for
-readability. Gerrit will link issue IDs automatically to the corresponding entry
-in Jira.
-
-Each commit must also contain the following line at the bottom of the commit
-message:
-
-```sh
-Signed-off-by: Your Name <your@email.address>
-```
-
-The name in the Signed-off-by line and your email must match the change
-authorship information. Make sure your :file:``.git/config`` is set up
-correctly. Always submit the full set of changes via Gerrit.
-
-When a change is included in the set to enable other changes, but it will not be
-part of the final set, please let the reviewers know this.
diff --git a/docs/7_How_To_Contribute/5_Reviewing_Changes.md b/docs/7_How_To_Contribute/5_Reviewing_Changes.md
deleted file mode 100644
index e9d6758..0000000
--- a/docs/7_How_To_Contribute/5_Reviewing_Changes.md
+++ /dev/null
@@ -1,55 +0,0 @@
----
-title: Reviewing Changes
----
-
-1. Click on a link for incoming or outgoing review.
-
-2. The details of the change and its current status are loaded:
-
-      ![review](images/review.png)
-
-      -  **Status:** Displays the current status of the change.
-
-      -  **Reply:** Click on this button after reviewing to add a final review
-         message and a score, -1, 0 or +1.
-
-      -  **Patch Sets:** If multiple revisions of a patch exist, this button
-         enables navigation among revisions to see the changes. By default, the
-         most recent revision is presented.
-
-      -  **Download:** This button brings up another window with multiple
-         options to download or checkout the current changeset. The button on
-         the right copies the line to your clipboard. You can easily paste it
-         into your git interface to work with the patch as you prefer.
-
-         Underneath the commit information, the files that have been changed by
-         this patch are displayed.
-
-3. Click on a filename to review it. Select the code base to differentiate
-   against. The default is ``Base`` and it will generally be what is needed.
-
-4. The review page presents the changes made to the file. At the top of the
-   review, the presentation shows some general navigation options. Navigate
-   through the patch set using the arrows on the top right corner. It is
-   possible to go to the previous or next file in the set or to return to the
-   main change screen. Click on the yellow sticky pad to add comments to the
-   whole file.
-
-      The focus of the page is on the comparison window. The changes made are
-      presented in green on the right versus the base version on the left.
-      Double click to highlight the text within the actual change to provide
-      feedback on a specific section of the code. Press *c* once the code is
-      highlighted to add comments to that section.
-
-5. After adding the comment, it is saved as a *Draft*.
-
-6. Once you have reviewed all files and provided feedback, click the *green up
-   arrow* at the top right to return to the main change page. Click the
-   ``Reply`` button, write some final comments, and submit your score for the
-   patch set. Click ``Post`` to submit the review of each reviewed file, as well
-   as your final comment and score. Gerrit sends an email to the
-   change-submitter and all listed reviewers. Finally, it logs the review for
-   future reference. All individual comments are saved as *Draft* until the
-   ``Post`` button is clicked.
-
-
diff --git a/docs/7_How_To_Contribute/6_Gerrit_Recommended_Practices.md b/docs/7_How_To_Contribute/6_Gerrit_Recommended_Practices.md
deleted file mode 100644
index 671c685..0000000
--- a/docs/7_How_To_Contribute/6_Gerrit_Recommended_Practices.md
+++ /dev/null
@@ -1,263 +0,0 @@
----
-title: Gerrit Recommended Practices
----
-
-This document presents some best practices to help you use Gerrit more
-effectively. The intent is to show how content can be submitted easily. Use the
-recommended practices to reduce your troubleshooting time and improve
-participation in the community.
-
-## Commit Messages
-
-Gerrit follows the Git commit message format. Ensure the headers are at the
-bottom and don't contain blank lines between one another. The following example
-shows the format and content expected in a commit message:
-
-Brief (no more than 50 chars) one line description.
-
-Elaborate summary of the changes made referencing why (motivation), what was
-changed and how it was tested. Note also any changes to documentation made to
-remain consistent with the code changes, wrapping text at 72 chars/line.
-
-```sh
-Bug-AGL: SPEC-<JIRA-ID>
-
-Change-Id: LONGHEXHASH
-Signed-off-by: Your Name your.email\@example.org
-```
-
-The Gerrit server provides a precommit hook to autogenerate the Change-Id which
-is one time use.
-
-**Recommended reading:** [How to Write a Git Commit
-Message](http://chris.beams.io/posts/git-commit/).
-
-## Avoid Pushing Untested Work to a Gerrit Server
-
-To avoid pushing untested work to Gerrit.
-
-Check your work at least three times before pushing your change to Gerrit. Be
-mindful of what information you are publishing.
-
-## Keeping Track of Changes
-
--  Set Gerrit to send you emails:
-
--  Gerrit will add you to the email distribution list for a change if a
-   developer adds you as a reviewer, or if you comment on a specific Patch Set.
-
--  Opening a change in Gerrit's review interface is a quick way to follow that
-   change.
-
--  Watch projects in the Gerrit projects section at ``Gerrit``, select at least
-   *New Changes, New Patch Sets, All Comments* and *Submitted Changes*.
-
-Always track the projects you are working on; also see the feedback/comments
-[mailing list](https://lists.automotivelinux.org/g/agl-dev-community) to learn
-and help others ramp up.
-
-## Topic branches
-
-Topic branches are temporary branches that you push to commit a set of
-logically-grouped dependent commits:
-
-To push changes from ``REMOTE/master`` tree to Gerrit for being reviewed as a
-topic in **TopicName** use the following command as an example:
-
-```sh
-$ git push REMOTE HEAD:refs/for/master/TopicName
-```
-
-The topic will show up in the review ``UI`` and in the ``Open Changes List``.
-Topic branches will disappear from the master tree when its content is merged.
-
-## Finding Available Topics
-
-```sh
-$ ssh -p 29418 <LFID>@gerrit.automotivelinux.org gerrit query \ status:open branch:master| grep topic: | sort -u
-```
-
--  [gerrit.automotivelinux.org](https://gerrit.automotivelinux.org) is the
-   current URL where the project is hosted.
--  *status* : Indicates the topic's current status: open , merged, abandoned,
-   draft, merge conflict.
--  *project* : Refers to the current name of the project, in this case fabric.
--  *branch* : The topic is searched at this branch.
--  *topic* : The name of an specific topic, leave it blank to include them all.
--  *sort* : Sorts the found topics, in this case by update (-u).
-
-## Downloading or Checking Out a Change
-
-In the review UI, on the top right corner, the **Download** link provides a list
-of commands and hyperlinks to checkout or download diffs or files.
-
-We recommend the use of the *git review* plugin. The steps to install git review
-are beyond the scope of this document. Refer to the [git review
-documentation](https://wiki.openstack.org/wiki/Documentation/HowTo/FirstTimers)
-for the installation process.
-
-To check out a specific change using Git, the following command usually works:
-
-```sh
-$ git review -d CHANGEID
-```
-
-If you don't have Git-review installed, the following commands will do the same
-thing:
-
-```sh
-$ git fetch REMOTE refs/changes/NN/CHANGEIDNN/VERSION \ && git checkout FETCH_HEAD
-```
-
-For example, for the 4th version of change 2464, NN is the first two digits
-(24):
-
-```sh
-$ git fetch REMOTE refs/changes/24/2464/4 \ && git checkout FETCH_HEAD
-```
-
-## Using Sandbox Branches
-
-You can create your own branches to develop features. The branches are pushed to
-the ``refs/heads/sandbox/USERNAME/BRANCHNAME`` location.
-
-These commands ensure the branch is created in Gerrit's server.
-
-```sh
-$ git checkout -b sandbox/USERNAME/BRANCHNAME
-$ git push --set-upstream REMOTE HEAD:refs/heads/sandbox/USERNAME/BRANCHNAME
-```
-
-Usually, the process to create content is:
-
--  develop the code,
--  break the information into small commits,
--  submit changes,
--  apply feedback,
--  rebase.
-
-The next command pushes forcibly without review:
-
-```sh
-$ git push REMOTE sandbox/USERNAME/BRANCHNAME
-```
-
-You can also push forcibly with review:
-
-```sh
-$ git push REMOTE HEAD:ref/for/sandbox/USERNAME/BRANCHNAME
-```
-
-## Updating the Version of a Change
-
-During the review process, you might be asked to update your change. It is
-possible to submit multiple versions of the same change. Each version of the
-change is called a patch set.
-
-Always maintain the **Change-Id** that was assigned. For example, there is a
-list of commits, **c0...c7**, which were submitted as a topic branch:
-
-```sh
-
-$ git log REMOTE/master..master
-
-  c0
-  ...
-  c7
-
-$ git push REMOTE HEAD:refs/for/master/SOMETOPIC
-```
-
-After you get reviewers' feedback, there are changes in **c3** and **c4** that
-must be fixed. If the fix requires rebasing, rebasing changes the commit Ids,
-see the [rebasing](http://git-scm.com/book/en/v2/Git-Branching-Rebasing) section
-for more information. However, you must keep the same Change-Id and push the
-changes again:
-
-```sh
-$ git push REMOTE HEAD:refs/for/master/SOMETOPIC
-```
-
-This new push creates a patches revision, your local history is then cleared.
-However you can still access the history of your changes in Gerrit on the
-``review UI`` section, for each change.
-
-It is also permitted to add more commits when pushing new versions.
-
-### Rebasing
-
-Rebasing is usually the last step before pushing changes to Gerrit; this allows
-you to make the necessary *Change-Ids*. The *Change-Ids* must be kept the same.
-
--  **squash:** mixes two or more commits into a single one.
--  **reword:** changes the commit message.
--  **edit:** changes the commit content.
--  **reorder:** allows you to interchange the order of the commits.
--  **rebase:** stacks the commits on top of the master.
-
-## Rebasing During a Pull
-
-Before pushing a rebase to your master, ensure that the history has a
-consecutive order.
-
-For example, your ``REMOTE/master`` has the list of commits from **a0** to
-**a4**; Then, your changes **c0...c7** are on top of **a4**; thus:
-
-```sh
-$ git log --oneline REMOTE/master..master
-
-  a0
-  a1
-  a2
-  a3
-  a4
-  c0
-  c1
-  ...
-  c7
-```
-
-If ``REMOTE/master`` receives commits **a5**, **a6** and **a7**. Pull with a
-rebase as follows:
-
-```sh
-$ git pull --rebase REMOTE master
-```
-
-This pulls **a5-a7** and re-apply **c0-c7** on top of them:
-
-```sh
-$ git log --oneline REMOTE/master..master
-a0
-...
-a7
-c0
-c1
-...
-c7
-```
-
-## Getting Better Logs from Git
-
-Use these commands to change the configuration of Git in order to produce better
-logs:
-
-```sh
-$ git config log.abbrevCommit true
-```
-
-The command above sets the log to abbreviate the commits' hash.
-
-```sh
-$ git config log.abbrev 5
-```
-
-The command above sets the abbreviation length to the last 5 characters of the
-hash.
-
-```sh
-$ git config format.pretty oneline
-```
-
-The command above avoids the insertion of an unnecessary line before the Author
-line.
diff --git a/docs/7_How_To_Contribute/7_General_Guidelines.md b/docs/7_How_To_Contribute/7_General_Guidelines.md
deleted file mode 100644
index 66092de..0000000
--- a/docs/7_How_To_Contribute/7_General_Guidelines.md
+++ /dev/null
@@ -1,163 +0,0 @@
----
-title: General Guidelines
----
-
-## Getting help
-
-If you are looking for something to work on, or need some expert assistance in
-debugging a problem or working out a fix to an issue, our community is always
-eager to help. We hang out on various [developer
-meetings](https://www.automotivelinux.org/developer-meetings/), IRC (#automotive
-on irc.libera.chat) and the [mailing
-lists](https://lists.automotivelinux.org/g/agl-dev-community). We will be glad
-to help. The only silly question is the one you don't ask. Questions are in fact
-a great way to help improve the project as they highlight where our
-documentation could be clearer.
-
-## Reporting bugs
-
-If you are a user and you have found a bug, please submit an issue using
-[JIRA](https://jira.automotivelinux.org/). Before you create a new JIRA issue,
-please try to search the existing items to be sure no one else has previously
-reported it. If it has been previously reported, then you might add a comment
-that you also are interested in seeing the defect fixed.
-
-If it has not been previously reported, create a new JIRA. Please try to provide
-sufficient information for someone else to reproduce the issue. One of the
-project's maintainers should respond to your issue within 24 hours. If not,
-please bump the issue with a comment and request that it be reviewed.
-
-## Submitting your fix
-
-If you just submitted a JIRA for a bug you've discovered, and would like to
-provide a fix, we would welcome that gladly! Please assign the JIRA issue to
-yourself, then you can submit a change request (CR).
-
-**NOTE:** If you need help with submitting your first CR, we have created a
-brief [tutorial](./4_Submitting_Changes.md) for you.
-
-## Fixing issues and working stories
-
-Review the [open issue list](https://jira.automotivelinux.org/issues/?filter=-5)
-and find something that interests you. It is wise to start with something
-relatively straight forward and achievable, and that no one is already assigned.
-If no one is assigned, then assign the issue to yourself. Please be considerate
-and rescind the assignment if you cannot finish in a reasonable time, or add a
-comment saying that you are still actively working the issue if you need a
-little more time.
-
-## Reviewing submitted Change Requests (CRs)
-
-Another way to contribute and learn about Automotive Grade Linux is to help the
-maintainers with the review of the CRs that are open. Indeed maintainers have
-the difficult role of having to review all the CRs that are being submitted and
-evaluate whether they should be merged or not. You can review the code and/or
-documentation changes, test the changes, and tell the submitters and maintainers
-what you think. Once your review and/or test is complete just reply to the CR
-with your findings, by adding comments and/or voting. A comment saying something
-like "I tried it on system X and it works" or possibly "I got an error on system
-X: xxx " will help the maintainers in their evaluation. As a result, maintainers
-will be able to process CRs faster and everybody will gain from it.
-
-Just browse through the [open CRs on
-Gerrit](https://gerrit.automotivelinux.org/gerrit/q/status:open) to get started.
-
-## Making Feature/Enhancement Proposals
-
-Review [JIRA](https://jira.automotivelinux.org/) to be sure that there isn't
-already an open (or recently closed) proposal for the same function. If there
-isn't, to make a proposal we recommend that you open a JIRA Epic, Story or
-Improvement, whichever seems to best fit the circumstance and link or inline a
-"one pager" of the proposal that states what the feature would do and, if
-possible, how it might be implemented. It would help also to make a case for why
-the feature should be added, such as identifying specific use case(s) for which
-the feature is needed and a case for what the benefit would be should the
-feature be implemented. Once the JIRA issue is created, and the "one pager"
-either attached, inlined in the description field, or a link to a publicly
-accessible document is added to the description, send an introductory email to
-the [agl-dev community](mailto:agl-dev-community@lists.automotivelinux.org)
-mailing list linking the JIRA issue, and soliciting feedback.
-
-Discussion of the proposed feature should be conducted in the JIRA issue itself,
-so that we have a consistent pattern within our community as to where to find
-design discussion.
-
-Getting the support of three or more of the AGL maintainers for the new feature
-will greatly enhance the probability that the feature's related CRs will be
-merged.
-
-## What makes a good change request?
-
--  One change at a time. Not five, not three, not ten. One and only one. Why?
-   Because it limits the blast area of the change. If we have a regression, it
-   is much easier to identify the culprit commit than if we have some composite
-   change that impacts more of the code.
-
--  Include a link to the JIRA story for the change. Why? Because a) we want to
-   track our velocity to better judge what we think we can deliver and when and
-   b) because we can justify the change more effectively. In many cases, there
-   should be some discussion around a proposed change and we want to link back
-   to that from the change itself.
-
--  Include unit and integration tests (or changes to existing tests) with every
-   change. This does not mean just happy path testing, either. It also means
-   negative testing of any defensive code that it correctly catches input
-   errors. When you write code, you are responsible to test it and provide the
-   tests that demonstrate that your change does what it claims. Why? Because
-   without this we have no clue whether our current code base actually works.
-
--  Minimize the lines of code per CR. Why? If you send a 1,000 or 2,000 LOC
-   change, how long do you think it takes to review all of that code? Keep your
-   changes to < 200-300 LOC, if possible. If you have a larger change, decompose
-   it into multiple independent changess. If you are adding a bunch of new
-   functions to fulfill the requirements of a new capability, add them
-   separately with their tests, and then write the code that uses them to
-   deliver the capability. Of course, there are always exceptions. If you add a
-   small change and then add 300 LOC of tests, you will be forgiven;-) If you
-   need to make a change that has broad impact or a bunch of generated code
-   (protobufs, etc.). Again, there can be exceptions.
-
-      **NOTE:** Large change requests, e.g. those with more than 300 LOC are
-      more likely than not going to receive a -2, and you'll be asked to
-      refactor the change to conform with this guidance.
-
--  Do not stack change requests (e.g. submit a CR from the same local branch as
-   your previous CR) unless they are related. This will minimize merge conflicts
-   and allow changes to be merged more quickly. If you stack requests your
-   subsequent requests may be held up because of review comments in the
-   preceding requests.
-
--  Write a meaningful commit message. Include a meaningful 50 (or less)
-   character title, followed by a blank line, followed by a more comprehensive
-   description of the change. Each change MUST include the JIRA identifier
-   corresponding to the change (e.g. [SPEC-1234]). This can be in the title but
-   should also be in the body of the commit message. See the [complete
-   requirements](./4_Submitting_Changes.md) for an acceptable change request.
-
-   **NOTE:** That Gerrit will automatically create a hyperlink to the JIRA item.
-
-   ```sh
-   Bug-AGL: [SPEC-<JIRA-ID>] ....
-
-   Fix [SPEC-<JIRA-ID>] ....
-   ```
-
-Finally, be responsive. Don't let a change request fester with review comments
-such that it gets to a point that it requires a rebase. It only further delays
-getting it merged and adds more work for you - to remediate the merge conflicts.
-
-## Legal stuff
-
-We have tried to make it as easy as possible to make contributions. This applies
-to how we handle the legal aspects of contribution.
-
-We simply ask that when submitting a patch for review, the developer must
-include a sign-off statement in the commit message. This is done to ensure that
-the author of the change adhere to follow [**DCO**](https://developercertificate.org/).
-
-```sh
-Signed-off-by: John Doe <john.doe@example.com>
-```
-
-You can include this automatically when you commit a change to your local git
-repository using ``git commit -s``.
diff --git a/docs/7_How_To_Contribute/8_Adding_Documentation.md b/docs/7_How_To_Contribute/8_Adding_Documentation.md
deleted file mode 100644
index 3777ecc..0000000
--- a/docs/7_How_To_Contribute/8_Adding_Documentation.md
+++ /dev/null
@@ -1,131 +0,0 @@
----
-title: Adding Documentation
----
-
-The [documentation gerrit
-repository](https://gerrit.automotivelinux.org/gerrit/admin/repos/AGL/documentation)
-contains AGL documentation website template and content, rendering is visible at
-[https://automotivegradelinux.readthedocs.io/en/latest/](https://automotivegradelinux.readthedocs.io/en/latest/).
-The documentation site is hosted on
-[readthedocs](https://readthedocs.org/projects/automotivegradelinux/) and
-corresponding builds are mentioned
-[here](https://readthedocs.org/projects/automotivegradelinux/builds/).
-
-## Download Repository
-
-
-Clone with commit-msg hook :
-
-```sh
-$ git clone "ssh://<LFID>@gerrit.automotivelinux.org:29418/AGL/documentation" && scp -p -P 29418 <LFID>@gerrit.automotivelinux.org:hooks/commit-msg "documentation/.git/hooks/"
-```
-
-## Building a local site
-
-1. Change into the directory
-
-    ```sh
-    $ cd documentation
-    ```
-
-2. Install MkDocs and rtd-dropdown theme
-
-    ```sh
-    $ sudo pip install -r requirements.txt
-    ```
-
-3. Serve locally (defaultly rendered at [127.0.0.1:8000/](127.0.0.1:8000/)):
-
-    ```sh
-    $ sudo mkdocs serve
-    ```
-
-Process to **add new or edit existing** markdown files to AGL documentation:
-
-## Directory Structure
-
-Find existing or add new markdowns in the following directory structure.
-
-```sh
-documentation
-├── docs
-│   ├── 1_Getting_Started
-│   │   ├── 1_Quickstart
-│   │   └── 2_Building_AGL_Image
-|   ├── .....
-|   |
-|   ├──<Chapter_Number>_<Chapter_Name>
-|   |   ├──<Subchapter_Number>_<Subchapter_Name>
-|   |   |   ├──<Index_Number>_<Markdown_Title>.md
-|   |   |   ├── .....
-```
-**File Naming convention** AGL follows Snake Case (snake_case) naming convention to name the documentation files.
-This type of naming combines words simply by replacing the space with an underscore (_).
-All the names will also include a index number before the name.
-Index number will use two digit numbers from 01-99 followed by name of the file.
-For example: If the file name is Build Process then it will be written as 01_build_process.md
-
-**Note:** If a file needs to be inserted in between already created sequences, then the index number will be the last index number followed by new numbering. For example, A new file is inserted between 06-07, then the index number for the new file will be 07_01, as in gist sorting, 07_01 will appear after 06 and before 07.
-
-## Markdown Formatting
-
-  1. Add following at the start of each markdown :
-
-    ```sh
-    ---
-    title: <enter-title>
-    ---
-    ```
-
-  2. Internal Linking :
-
-    ```sh
-    [<enter-title>](../<Chapter-Number>_<Chapter-Name>/<Subchapter-Number>_<Subchapter-Name>/<Index-Number>_<Markdown-Title>.md)
-
-
-
-    ```
-
-## Test Hyperlinks
-
-[LinkChecker](https://wummel.github.io/linkchecker/) is a tool that allows to
-check all the hyperlinks in the site.
-
-For testing hyperlinks as soon as the local site is running, do:
-
-```sh
-$ linkchecker http://localhost:8000
-```
-
-The ```linkchecker``` output will display the broken link and there location in
-the site.
-
-
-## Submitting changes
-
-1. Install Git Review
-
-    ```sh
-    #recent version of git-review  (>=1.28.0 is required)
-    $ sudo pip3 install git-review 
-    ```
-
-2. Write commit message (**Note:** Please follow [submitting changes](./4_Submitting_Changes.md) guideline to write your commit message.)
-
-    ```sh
-    # track all the new changes
-    $ git add .
-
-    # Write the commit message
-    $ git commit --signoff
-    ```
-
-3. Push changes for review to Gerrit
-
-    ```sh
-    # first time only
-    $ git review -s
-
-    # then to push use
-    $ git review
-    ```
diff --git a/docs/7_How_To_Contribute/9_Contribution_Checklist.md b/docs/7_How_To_Contribute/9_Contribution_Checklist.md
deleted file mode 100644
index 7d86ada..0000000
--- a/docs/7_How_To_Contribute/9_Contribution_Checklist.md
+++ /dev/null
@@ -1,60 +0,0 @@
----
-title: Contribution Checklist
----
-
-**Open Source Code Contribution Checklist**
-
-## General
-- [ ] Does the component have a name ? (Pick one fitting the purpose and the project.)
-- [ ] Is a separate git repo required for the component ?
-- [ ] Does the component have a README.md containing all basic information about it ?
-    - [ ] Description.
-    - [ ] Dependencies.
-    - [ ] Build instructions.
-    - [ ] Installation instructions.
-    - [ ] Usage instructions.
-    - [ ] Example invocations.
-- [ ] Does the component have a CONTRIBUTIONS.md file? (Containing all necessary information on how to contribute, e.g. pointing to project website? )
-
-## License
- - [ ] Is the license an OSI approved open source software license?
- - [ ] Are all files under an OSI approved open source license?
- - [ ] Does the component have a LICENSE (or COPYING) file detailing the license of the code?
- - [ ] Do the source code files have the license mentioned in the header?
- - [ ] Do the source code files have an SPDX tag? (Note: An SPDX tag can be used in a file header instead of the license note)
- - [ ] Are there files with other licenses in their header?
-     - [ ] If so, LICENSE should be the for the majority of the files and LICENSE.xyz for the exceptions.
-
-## docs/
- - [ ] Are there docs/ folder for the component ?
-     - [ ] e.g. Are all APIs described inclusive description, usage and example invocations ?
-     - [ ] e.g. Are all cmdline tools or options described in the documentation ?
-     - [ ] e.g. Is the program flow described ?
- - [ ] Contain Changelog.md ? (Keep track of major changes in the changelog.)
-
-## tests/
- - [ ] Must have tests available.
- - [ ] Must have simple invocation scripts available.
- - [ ] Must have instructions for CI available.
- - [ ] Must contribute CI test definitions.
-
-## Git repository
- - [ ] Must have: a .gitreview file.
-     - [ ] Option: Can have a .gitignore file.
-     - [ ] Option: Can have a .editorconfig file.
- - [ ] All code needs to build against master.
- - [ ] Is a backport to a release branch required ?
- - [ ] Code contributions submitted need to have a Sign-off-by! (Follow [**DCO**](https://developercertificate.org/).)
-
-## Yocto/OE
- - [ ] Recipes need to follow the guidelines of : [**new-recipe-writing-a-new-recipe**](https://www.yoctoproject.org/docs/latest/mega-manual/mega-manual.html#new-recipe-writing-a-new-recipe).
- - [ ] Recipes follow the [**bitbake style guide**](https://www.openembedded.org/wiki/Styleguide).
- - [ ] Your 'meta-*' layer needs to pass the yocto-check-layer tool.
-
-## Gerrit Reviews
-**All gerrit reviews need to be addressed. All issues are to be discussed with the experts.**
-
- - [ ] Issues are to be discussed in the EG first.
- - [ ] Consent needs to be reached.
- - [ ] Gerrit commits need two upvotes (not from authors!) to be merged.
- - [ ] Uploads should be 'ready for review' or marked 'WIP'.
\ No newline at end of file
diff --git a/docs/7_How_To_Contribute/A_How_to_setup_your_own_AGL_LAVA_Lab.md b/docs/7_How_To_Contribute/A_How_to_setup_your_own_AGL_LAVA_Lab.md
deleted file mode 100644
index f445b8c..0000000
--- a/docs/7_How_To_Contribute/A_How_to_setup_your_own_AGL_LAVA_Lab.md
+++ /dev/null
@@ -1,211 +0,0 @@
-
-## Prerequisites ##
-
-As well as the packages docker, docker-compose and pyyaml mentioned in the top
-
-level README, you will need the following:
-
-  
-
-1) The following ports are forwarded to docker and therefore need to be kept free
-
-on the host machine:
-
-- 69/UDP: proxyfied to the slave for TFTP
-
-- 80: proxyfied to the slave for TODO (transfer overlay)
-
-- 5500: proxyfied to the slave for Notification
-
-- 55950-56000: proxyfied to the slave for NBD
-
-2) You will need a remote power switch to remotely power the DUTs on and off.
-
-3) You need to have an account with lava.automotivelinux.org. Please contact the
-
-agl-dev-community mailing list if you would like an account, and include that you would
-
-like to create your own lab in the email so that the relevant user permissions
-
-can be set.
-
-  
-
-## Steps to create your own LAVA lab ##
-
-  
-
-1) Clone AGL lava-docker image:
-
-```
-
-git clone https://git.automotivelinux.org/AGL/lava-docker.git
-
-cd lava-docker
-
-```
-
-  
-
-2) On the LAVA master web GUI, create a new API token:
-
-https://lava.automotivelinux.org/api/tokens/
-
-  
-
-3) Connect all the DUTs' serial to usb and ethernet connections to the host.
-
-
-4) Edit the boards.yaml file:
-
-- Copy the API token you created in step 2 in the place of <generated_lab_token>.
-
-- Add details of each board connected to the lab. See the top level README for
-
-instructions. You will need the following:
-
-- any custom options you require in the kernel args
-
-- uart idvendor, idproduct, devpath
-
-- power on, off and reset commads for the power switch
-
-  
-
-To get the uart idvendor and idproduct, unplug and re-plugin the USB cable of the
-
-device in question and then find the details in the latest output of:
-
-```
-
-sudo dmesg | grep idvendor
-
-```
-
-  
-
-To get the uart devpath, run the command:
-
-```
-
-udevadm info -a -n /dev/ttyUSB1 |grep devpath | head -n1
-
-```
-
-  
-
-NOTE: Make sure you have at least one "board" included. (It is easiest to keep
-
-qemu).
-
-  
-
-5) Run the automated setup script:
-
-```
-
-./start.sh slave
-
-```
-
-  
-
-7) Check the web GUI to see if the lab has successfully connected to the LAVA
-
-master: https://lava.automotivelinux.org/scheduler/allworkers. If it isn't, run the
-
-following command for debugging:
-
-```
-
-docker-exec -it <name_of_docker_container> cat /var/log/lava-dispatcher/lava-slave.log
-
-```
-
-To identify the container name run the following to list the running containers:
-
-```
-
-docker ps
-
-```
-
-  
-
-LAVA logs can be found in `/var/log/lava-dispatcher/`.
-
-  
-
-8) Helper scripts
-
-There are a few helper scripts to automate starting/stopping the lab.
-
-```
-
-./start.sh slave
-
-./restart.sh slave
-
-./stop.sh slave
-
-```
-
-  
-
-## Adding new device-type templates ##
-
-  
-
-Not all device types are supported by default. Templates for new devices will
-
-need to be added to the LAVA master. Please submit new templates to the agl-dev-community
-
-mailing list.
-
-  
-
-Before you submit any new device-type templates, please verify that they work.
-
-You can verify that they work in LAVA by carrying out the following instructions:
-
-1) Install lavacli on Debian Stretch or Ubuntu 18.04 and later (if you don't
-
-have a compatible OS, please see https://lava.automotivelinux.org/api/help/ for an
-
-alternative way to use the API)
-
-2) Create your lavacli config file
-
-```
-
-touch ~/.config/lavacli.yaml
-
-```
-
-3) Configure this file to look like the following (note: use the first token
-
-created in https://lava.automotivelinux.org/api/tokens/)
-
-```
-
-default:
-
-uri: https://lava.automotivelinux.org/RPC2
-
-username: <username>
-
-token: <API_token>
-
-```
-
-4) Add your device template to the master
-
-```
-
-lavacli device-types template set <device-type-name> <device-type-name>.yaml
-
-```
-
-NOTE: make sure your device-type templates always follow the following naming scheme:
-
-```<device-type-name>.yaml```
diff --git a/docs/7_How_To_Contribute/images/jira-1.png b/docs/7_How_To_Contribute/images/jira-1.png
deleted file mode 100644
index 4a39bfb..0000000
--- a/docs/7_How_To_Contribute/images/jira-1.png
+++ /dev/null
diff --git a/docs/7_How_To_Contribute/images/jira-2.png b/docs/7_How_To_Contribute/images/jira-2.png
deleted file mode 100644
index c1cdb21..0000000
--- a/docs/7_How_To_Contribute/images/jira-2.png
+++ /dev/null
diff --git a/docs/7_How_To_Contribute/images/jira-3.png b/docs/7_How_To_Contribute/images/jira-3.png
deleted file mode 100644
index b1bec2e..0000000
--- a/docs/7_How_To_Contribute/images/jira-3.png
+++ /dev/null
diff --git a/docs/7_How_To_Contribute/images/review.png b/docs/7_How_To_Contribute/images/review.png
deleted file mode 100644
index 805166a..0000000
--- a/docs/7_How_To_Contribute/images/review.png
+++ /dev/null