diff options
12 files changed, 59 insertions, 59 deletions
diff --git a/docs/01_Getting_Started/01_Quickstart/01_Using_Ready_Made_Images.md b/docs/01_Getting_Started/01_Quickstart/01_Using_Ready_Made_Images.md index bc4da4b..094fc45 100644 --- a/docs/01_Getting_Started/01_Quickstart/01_Using_Ready_Made_Images.md +++ b/docs/01_Getting_Started/01_Quickstart/01_Using_Ready_Made_Images.md @@ -8,9 +8,9 @@ AGL provides a number of pre-built ready-made images of various versions. ### 1. QEMU (Emulation) -1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemux86-64/deploy/images/qemux86-64/agl-demo-platform-crosssdk-qemux86-64.ext4.xz). +1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/release/pike/latest/qemux86-64/deploy/images/qemux86-64/agl-demo-platform-crosssdk-qemux86-64.ext4.xz). -2. Download the [compressed kernel image](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemux86-64/deploy/images/qemux86-64/bzImage). +2. Download the [compressed kernel image](https://download.automotivelinux.org/AGL/release/pike/latest/qemux86-64/deploy/images/qemux86-64/bzImage). 3. Install [QEMU](https://www.qemu.org/download/) : @@ -78,7 +78,7 @@ AGL provides a number of pre-built ready-made images of various versions. **NOTE :** Please note [https://www.virtualbox.org/ticket/19873](https://www.virtualbox.org/ticket/19873) as this affects the VMs resolution. The AGL demo images do require 1920x1080. The instructions below have been adapted. - 1. Download the [compressed vbox disk image](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemux86-64/deploy/images/qemux86-64/agl-demo-platform-crosssdk-qemux86-64.wic.vmdk.xz). + 1. Download the [compressed vbox disk image](https://download.automotivelinux.org/AGL/release/pike/latest/qemux86-64/deploy/images/qemux86-64/agl-demo-platform-crosssdk-qemux86-64.wic.vmdk.xz). 2. Install and set up [Virtual Box](https://www.virtualbox.org/wiki/Linux_Downloads). @@ -110,7 +110,7 @@ The AGL demo images do require 1920x1080. The instructions below have been adapt **NOTE :** UEFI enabled system is required. - 1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemux86-64/deploy/images/qemux86-64/agl-demo-platform-crosssdk-qemux86-64.wic.xz). + 1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/release/pike/latest/qemux86-64/deploy/images/qemux86-64/agl-demo-platform-crosssdk-qemux86-64.wic.xz). 2. Extract the image into USB drive : @@ -128,9 +128,9 @@ The AGL demo images do require 1920x1080. The instructions below have been adapt ### 1. QEMU (Emulation) -1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemuarm/deploy/images/qemuarm/agl-demo-platform-crosssdk-qemuarm.ext4.xz). +1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/release/pike/latest/qemuarm/deploy/images/qemuarm/agl-demo-platform-crosssdk-qemuarm.ext4.xz). -2. Download the [compressed kernel image](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemuarm/deploy/images/qemuarm/zImage). +2. Download the [compressed kernel image](https://download.automotivelinux.org/AGL/release/pike/latest/qemuarm/deploy/images/qemuarm/zImage). 3. Install [QEMU](https://www.qemu.org/download/) : @@ -199,7 +199,7 @@ The AGL demo images do require 1920x1080. The instructions below have been adapt ### 2. BeagleBone Enhanced (BBE) - 1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/master/latest/bbe/deploy/images/bbe/agl-telematics-demo-platform-bbe.wic.xz). + 1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/release/pike/latest/bbe/deploy/images/bbe/agl-telematics-demo-platform-bbe.wic.xz). 2. Extract the image into the SD card of BeagleBone Enhanced : @@ -224,9 +224,9 @@ The AGL demo images do require 1920x1080. The instructions below have been adapt ### 1. QEMU (Emulation) -1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemuarm64/deploy/images/qemuarm64/agl-demo-platform-crosssdk-qemuarm64.ext4.xz). +1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/release/pike/latest/qemuarm64/deploy/images/qemuarm64/agl-demo-platform-crosssdk-qemuarm64.ext4.xz). -2. Download the [compressed kernel image](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemuarm64/deploy/images/qemuarm64/Image). +2. Download the [compressed kernel image](https://download.automotivelinux.org/AGL/release/pike/latest/qemuarm64/deploy/images/qemuarm64/Image). 3. Install [QEMU](https://www.qemu.org/download/) : @@ -295,7 +295,7 @@ The AGL demo images do require 1920x1080. The instructions below have been adapt ### 2. Raspberry Pi 4 - 1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/master/latest/raspberrypi4/deploy/images/raspberrypi4-64/agl-demo-platform-crosssdk-raspberrypi4-64.wic.xz). + 1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/release/pike/latest/raspberrypi4/deploy/images/raspberrypi4-64/agl-demo-platform-crosssdk-raspberrypi4-64.wic.xz). 2. Extract the image into the SD card of Raspberry Pi 4 : @@ -363,9 +363,9 @@ The AGL demo images do require 1920x1080. The instructions below have been adapt **NOTE :** The prebuilt image does support **non-accelerated** graphics mode (software rendering). For **accelerated** graphics support, a local build with the neccesary graphics driver is required. - 1. Update the [firmware](https://elinux.org/R-Car/Boards/H3SK#Flashing_firmware) using files from [here](https://download.automotivelinux.org/AGL/snapshots/master/latest/h3ulcb-nogfx/deploy/images/h3ulcb/). + 1. Update the [firmware](https://elinux.org/R-Car/Boards/H3SK#Flashing_firmware) using files from [here](https://download.automotivelinux.org/AGL/release/pike/latest/h3ulcb-nogfx/deploy/images/h3ulcb/). - 2. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/master/latest/h3ulcb-nogfx/deploy/images/h3ulcb/agl-demo-platform-crosssdk-h3ulcb.wic.xz). + 2. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/release/pike/latest/h3ulcb-nogfx/deploy/images/h3ulcb/agl-demo-platform-crosssdk-h3ulcb.wic.xz). 3. Extract the image into the boot device : diff --git a/docs/01_Getting_Started/02_Building_AGL_Image/02_Preparing_Your_Build_Host.md b/docs/01_Getting_Started/02_Building_AGL_Image/02_Preparing_Your_Build_Host.md index 846271f..f8cdcd2 100644 --- a/docs/01_Getting_Started/02_Building_AGL_Image/02_Preparing_Your_Build_Host.md +++ b/docs/01_Getting_Started/02_Building_AGL_Image/02_Preparing_Your_Build_Host.md @@ -17,7 +17,7 @@ the Yocto Project documentation **NOTE:** This entire section presumes you want to build an image. You can skip the entire build process if you want to use a ready-made development image. -The [supported images](https://download.automotivelinux.org/AGL/snapshots/master/latest/) exist for several boards as +The [supported images](https://download.automotivelinux.org/AGL/release/pike/latest/) exist for several boards as well as for the Quick EMUlator (QEMU). See the "[Quickstart](../01_Quickstart/01_Using_Ready_Made_Images.md)" diff --git a/docs/01_Getting_Started/02_Building_AGL_Image/04_Initializing_Your_Build_Environment.md b/docs/01_Getting_Started/02_Building_AGL_Image/04_Initializing_Your_Build_Environment.md index 347e1bf..d9d4ea5 100644 --- a/docs/01_Getting_Started/02_Building_AGL_Image/04_Initializing_Your_Build_Environment.md +++ b/docs/01_Getting_Started/02_Building_AGL_Image/04_Initializing_Your_Build_Environment.md @@ -10,7 +10,7 @@ run to initialize the build environment. You can find this script here: ```sh -$AGL_TOP/master/meta-agl/scripts/aglsetup.sh +$AGL_TOP/pike/meta-agl/scripts/aglsetup.sh ``` The script accepts many options that allow you to define build parameters such @@ -18,7 +18,7 @@ as the target hardware (i.e. the machine), build directory, and so forth. Use the following commands to see the available options and script syntax: ```sh -$ cd $AGL_TOP/master +$ cd $AGL_TOP/pike $ source meta-agl/scripts/aglsetup.sh -h ``` @@ -224,7 +224,7 @@ Common targets are: Running the script creates the Build Directory if it does not already exist. The default Build Directory is `$AGL_TOP/<release-branch-name>/build`, and the nomenclature to be used throughout this doc is going to be `$AGL_TOP/<release-branch-name>/<build-dir>` -For this example, the Build Directory is `$AGL_TOP/master/qemux86-64`. +For this example, the Build Directory is `$AGL_TOP/pike/qemux86-64`. The script's output also indicates the machine and AGL features selected for the build. diff --git a/docs/01_Getting_Started/02_Building_AGL_Image/05_Customizing_Your_Build.md b/docs/01_Getting_Started/02_Building_AGL_Image/05_Customizing_Your_Build.md index 31d2852..dfe1629 100644 --- a/docs/01_Getting_Started/02_Building_AGL_Image/05_Customizing_Your_Build.md +++ b/docs/01_Getting_Started/02_Building_AGL_Image/05_Customizing_Your_Build.md @@ -128,7 +128,7 @@ using mirrors. To use mirrors, add this line to your `local.conf` file in the Build directory: ```sh -SSTATE_MIRRORS_append = " file://.* https://download.automotivelinux.org/sstate-mirror/master/${DEFAULTTUNE}/PATH \n " +SSTATE_MIRRORS_append = " file://.* https://download.automotivelinux.org/sstate-mirror/pike/${DEFAULTTUNE}/PATH \n " ``` You can learn more about shared state and how it is used in the @@ -141,7 +141,7 @@ section of the Yocto Project Reference Manual. $ echo "# reuse download directories" >> $AGL_TOP/site.conf $ echo "DL_DIR = \"$HOME/downloads/\"" >> $AGL_TOP/site.conf $ echo "SSTATE_DIR = \"$AGL_TOP/sstate-cache/\"" >> $AGL_TOP/site.conf -$ cd $AGL_TOP/master/qemux86-64/ +$ cd $AGL_TOP/pike/qemux86-64/ $ ln -sf $AGL_TOP/site.conf conf/ In General; diff --git a/docs/01_Getting_Started/02_Building_AGL_Image/07_Building_for_x86_(Emulation_and_Hardware).md b/docs/01_Getting_Started/02_Building_AGL_Image/07_Building_for_x86_(Emulation_and_Hardware).md index e78ef58..4745cf6 100644 --- a/docs/01_Getting_Started/02_Building_AGL_Image/07_Building_for_x86_(Emulation_and_Hardware).md +++ b/docs/01_Getting_Started/02_Building_AGL_Image/07_Building_for_x86_(Emulation_and_Hardware).md @@ -133,7 +133,7 @@ If you built your image with bitbake, you can now just use the ``runqemu`` wrapp For this example : ```sh -$ source $AGL_TOP/master/qemux86-64/agl-init-build-env +$ source $AGL_TOP/pike/qemux86-64/agl-init-build-env ``` In general : diff --git a/docs/01_Getting_Started/02_Building_AGL_Image/09_Building_for_Supported_Renesas_Boards.md b/docs/01_Getting_Started/02_Building_AGL_Image/09_Building_for_Supported_Renesas_Boards.md index 8622194..35f7022 100644 --- a/docs/01_Getting_Started/02_Building_AGL_Image/09_Building_for_Supported_Renesas_Boards.md +++ b/docs/01_Getting_Started/02_Building_AGL_Image/09_Building_for_Supported_Renesas_Boards.md @@ -65,7 +65,7 @@ Follow these steps to download the drivers you need: | AGL Version | Renesas version | |:-:|:-:| - | AGL master | 5.9.0 | + | AGL pike | 5.9.0 | 3. **Download the Files:** diff --git a/docs/01_Getting_Started/03_Build_and_Boot_guide_Profile/01_Instrument_Cluster_(IC-IVI_with_Container_isolation).md b/docs/01_Getting_Started/03_Build_and_Boot_guide_Profile/01_Instrument_Cluster_(IC-IVI_with_Container_isolation).md index c3ddf80..e18903e 100644 --- a/docs/01_Getting_Started/03_Build_and_Boot_guide_Profile/01_Instrument_Cluster_(IC-IVI_with_Container_isolation).md +++ b/docs/01_Getting_Started/03_Build_and_Boot_guide_Profile/01_Instrument_Cluster_(IC-IVI_with_Container_isolation).md @@ -38,13 +38,13 @@ export AGL_TOP=$HOME/AGL/marlin cd $AGL_TOP git config --global user.email "you@example.com" git config --global user.name "Your Name" -repo init -b marlin -u https://gerrit.automotivelinux.org/gerrit/AGL/AGL-repo +repo init -b pike -u https://gerrit.automotivelinux.org/gerrit/AGL/AGL-repo repo sync ``` -- Optional: Specify the manifest file(marlin_13.0.0.xml) using -m option +- Optional: Specify the manifest file(pike_16.0.0.xml) using -m option ```bash -repo init -b marlin -m marlin_13.0.0.xml -u https://gerrit.automotivelinux.org/gerrit/AGL/AGL-repo +repo init -b pike -m pike_16.0.0.xml -u https://gerrit.automotivelinux.org/gerrit/AGL/AGL-repo ``` - Optional: Specify the master branch ```bash @@ -64,7 +64,7 @@ cp R-Car_Gen3_Series_Evaluation_Software_Package_* $XDG_DOWNLOAD_DIR/ chmod a+rw $XDG_DOWNLOAD_DIR/*.zip ``` ## 5. Define Your Board -- Supporting Starter Kit Pro/M3 + kingfisher Board (For other supported boards, check [Define Your Board](https://docs.automotivelinux.org/en/master/#01_Getting_Started/02_Building_AGL_Image/09_Building_for_Supported_Renesas_Boards.md)) +- Supporting Starter Kit Pro/M3 + kingfisher Board (For other supported boards, check [Define Your Board](https://docs.automotivelinux.org/en/pike/#01_Getting_Started/02_Building_AGL_Image/09_Building_for_Supported_Renesas_Boards.md)) ```bash export MACHINE=m3ulcb-kf ``` @@ -83,7 +83,7 @@ bitbake agl-cluster-demo-lxc-host ## 8.Boot the Board (Deploying the AGL Demo Image) - To boot your image on the Renesas board, you need to do three things: -a) Update all [firmware](https://docs.automotivelinux.org/en/master/#01_Getting_Started/02_Building_AGL_Image/09_Building_for_Supported_Renesas_Boards/#4-troubleshooting) on R-Car M3 Starter Kit board (Flashing firmware). +a) Update all [firmware](https://docs.automotivelinux.org/en/pike/#01_Getting_Started/02_Building_AGL_Image/09_Building_for_Supported_Renesas_Boards/#4-troubleshooting) on R-Car M3 Starter Kit board (Flashing firmware). b) Prepare the MicroSD card and Flash image to the MicroSD card using [Etcher](https://www.balena.io/etcher/) (**image file name:** lxc-host-image-demo-m3ulcb-kf.wic.xz), then insert MicroSD card in the R-Car M3SK. @@ -121,7 +121,7 @@ B) Connect HDMI panel to Kingfisher(CN49)for **Cluster Container** 1. [eLinux](https://elinux.org/R-Car/AGL) 1. [Kingfisher Board](https://elinux.org/R-Car/Boards/Kingfisher) 1. [R-Car M3SK](https://elinux.org/R-Car/Boards/M3SK#Flashing_firmware) - 1. [agl reference machines](https://docs.automotivelinux.org/en/master/#02_hardware_support/01_Supported_Hardware_Overview/) + 1. [agl reference machines](https://docs.automotivelinux.org/en/pike/#02_hardware_support/01_Supported_Hardware_Overview/) 1. [AGL Tech Day Presenation](https://static.sched.com/hosted_files/agltechday2022/3b/agl-techday-202204.pdf) - 1. [Build AGL Image](https://docs.automotivelinux.org/en/master/#01_Getting_Started/02_Building_AGL_Image/0_Build_Process_Overview/) - 1. [Building for Supported Renesas Boards](https://docs.automotivelinux.org/en/master/#01_Getting_Started/02_Building_AGL_Image/09_Building_for_Supported_Renesas_Boards/) + 1. [Build AGL Image](https://docs.automotivelinux.org/en/pike/#01_Getting_Started/02_Building_AGL_Image/0_Build_Process_Overview/) + 1. [Building for Supported Renesas Boards](https://docs.automotivelinux.org/en/pike/#01_Getting_Started/02_Building_AGL_Image/09_Building_for_Supported_Renesas_Boards/) diff --git a/docs/01_Getting_Started/03_Build_and_Boot_guide_Profile/02_Flutter_Instrument_Cluster_(qemu-x86).md b/docs/01_Getting_Started/03_Build_and_Boot_guide_Profile/02_Flutter_Instrument_Cluster_(qemu-x86).md index 330d996..59ea8ee 100644 --- a/docs/01_Getting_Started/03_Build_and_Boot_guide_Profile/02_Flutter_Instrument_Cluster_(qemu-x86).md +++ b/docs/01_Getting_Started/03_Build_and_Boot_guide_Profile/02_Flutter_Instrument_Cluster_(qemu-x86).md @@ -6,7 +6,7 @@ title: Flutter Instrument Cluster (qemu-x86) ## 0. Prepare Your Build Host -- Install the required tools to build an AGL Image. For detailed explanation, check [Preparing Your Build host](https://docs.automotivelinux.org/en/master/#01_Getting_Started/02_Building_AGL_Image/02_Preparing_Your_Build_Host/) +- Install the required tools to build an AGL Image. For detailed explanation, check [Preparing Your Build host](https://docs.automotivelinux.org/en/pike/#01_Getting_Started/02_Building_AGL_Image/02_Preparing_Your_Build_Host/) ## 1. Define Your Top-Level Directory @@ -27,12 +27,12 @@ $ chmod a+x $HOME/bin/repo ``` ## 3. Download the AGL Source Files -To download the latest **master** branch AGL files, use the following commands: +To download the latest **pike** branch AGL files, use the following commands: ```bash $ cd $AGL_TOP -$ mkdir master -$ cd master -$ repo init -u https://gerrit.automotivelinux.org/gerrit/AGL/AGL-repo +$ mkdir pike +$ cd pike +$ repo init -n pike -u https://gerrit.automotivelinux.org/gerrit/AGL/AGL-repo $ repo sync ``` @@ -40,24 +40,24 @@ $ repo sync To initialize the build environment, we must use the setup script. This script is available here: ```bash -$ $AGL_TOP/master/meta-agl/scripts/aglsetup.sh +$ $AGL_TOP/pike/meta-agl/scripts/aglsetup.sh ``` Run the script: ```bash $ cd $AGL_TOP -$ source master/meta-agl/scripts/aglsetup.sh -b build-flutter-cluster -m qemux86-64 agl-demo agl-devel +$ source pike/meta-agl/scripts/aglsetup.sh -b build-flutter-cluster -m qemux86-64 agl-demo agl-devel ``` - Here `-b` is used to specify the build directory and `-m` is used to specify the target platform. -- Running this script, will create a build directory if it does not exist. Default build directory: `$AGL_TOP/master/build-flutter-cluster` +- Running this script, will create a build directory if it does not exist. Default build directory: `$AGL_TOP/pike/build-flutter-cluster` - Default target paltform: `qemux86-64` ** NOTE: Set the API key in local.conf ** - By default navigation will not work, you need to set your openrouteservie API key to the variable `OPENROUTE_API_KEY` in your local.conf -- It is present at `$AGL_TOP/master/build-flutter-cluster/conf/local.conf` +- It is present at `$AGL_TOP/pike/build-flutter-cluster/conf/local.conf` - Example: Just add `OPENROUTE_API_KEY = "your_openrouteservice_api_key"` to the end of local.conf @@ -65,7 +65,7 @@ $ source master/meta-agl/scripts/aglsetup.sh -b build-flutter-cluster -m qemux86 ## 5. Using BitBake ```bash -$ cd $AGL_TOP/master/build-flutter-cluster +$ cd $AGL_TOP/pike/build-flutter-cluster $ source agl-init-build-env $ bitbake agl-cluster-demo-platform-flutter ``` @@ -74,7 +74,7 @@ $ bitbake agl-cluster-demo-platform-flutter Boot the image using QEMU ```bash -$ cd $AGL_TOP/master/build-flutter-cluster +$ cd $AGL_TOP/pike/build-flutter-cluster $ source agl-init-build-env $ runqemu kvm serialstdio slirp publicvnc ``` diff --git a/docs/01_Getting_Started/03_Build_and_Boot_guide_Profile/03_IVI_Flutter_apps.md b/docs/01_Getting_Started/03_Build_and_Boot_guide_Profile/03_IVI_Flutter_apps.md index 6055436..71df17b 100644 --- a/docs/01_Getting_Started/03_Build_and_Boot_guide_Profile/03_IVI_Flutter_apps.md +++ b/docs/01_Getting_Started/03_Build_and_Boot_guide_Profile/03_IVI_Flutter_apps.md @@ -6,7 +6,7 @@ title: IVI Flutter apps ## 0. Prepare Your Build Host -- Install the required tools to build an AGL Image. For detailed explanation, check [Preparing Your Build host](https://docs.automotivelinux.org/en/master/#01_Getting_Started/02_Building_AGL_Image/02_Preparing_Your_Build_Host/) +- Install the required tools to build an AGL Image. For detailed explanation, check [Preparing Your Build host](https://docs.automotivelinux.org/en/pike/#01_Getting_Started/02_Building_AGL_Image/02_Preparing_Your_Build_Host/) ## 1. Define Your Top-Level Directory @@ -27,12 +27,12 @@ $ chmod a+x $HOME/bin/repo ``` ## 3. Download the AGL Source Files -To download the latest **master** branch AGL files, use the following commands: +To download the latest **pike** branch AGL files, use the following commands: ```bash $ cd $AGL_TOP -$ mkdir master -$ cd master -$ repo init -u https://gerrit.automotivelinux.org/gerrit/AGL/AGL-repo +$ mkdir pike +$ cd pike +$ repo init -b pike -u https://gerrit.automotivelinux.org/gerrit/AGL/AGL-repo $ repo sync ``` @@ -40,24 +40,24 @@ $ repo sync To initialize the build environment, we must use the setup script. This script is available here: ```bash -$ $AGL_TOP/master/meta-agl/scripts/aglsetup.sh +$ $AGL_TOP/pike/meta-agl/scripts/aglsetup.sh ``` Run the script: ```bash -$ cd $AGL_TOP/master +$ cd $AGL_TOP/pike $ source meta-agl/scripts/aglsetup.sh -b build-flutter-dashboard -m qemux86-64 agl-demo agl-devel ``` - Here `-b` is used to specify the build directory and `-m` is used to specify the target platform. -- Running this script, will create a build directory if it does not exist. Default build directory: `$AGL_TOP/master/build-flutter-dashboard` +- Running this script, will create a build directory if it does not exist. Default build directory: `$AGL_TOP/pike/build-flutter-dashboard` - Default target paltform: `qemux86-64` ## 5. Using BitBake ```bash -$ cd $AGL_TOP/master/build-flutter-dashboard +$ cd $AGL_TOP/pike/build-flutter-dashboard $ source agl-init-build-env $ bitbake agl-ivi-demo-platform-flutter ``` @@ -66,7 +66,7 @@ $ bitbake agl-ivi-demo-platform-flutter Boot the image using QEMU ```bash -$ cd $AGL_TOP/master/build-flutter-dashboard +$ cd $AGL_TOP/pike/build-flutter-dashboard $ source agl-init-build-env $ runqemu kvm serialstdio slirp publicvnc ``` diff --git a/docs/02_Hardware_Support/01_Supported_Hardware_Overview.md b/docs/02_Hardware_Support/01_Supported_Hardware_Overview.md index eb7c9a4..55da59d 100644 --- a/docs/02_Hardware_Support/01_Supported_Hardware_Overview.md +++ b/docs/02_Hardware_Support/01_Supported_Hardware_Overview.md @@ -16,11 +16,11 @@ The following table briefs about the various hardware platforms, supported by AG | BOARD | MACHINE | ARCHITECTURE | QUICK START GUIDE| LATEST SNAPSHOT | |:---------------:|:--------------:|:------------:|:----------------:|:--------------------:| -| QEMU | qemu-x86-64 | x86 |[QEMU Quick Start](https://docs.automotivelinux.org/en/master/#01_Getting_Started/01_Quickstart/01_Using_Ready_Made_Images/#_top)| [qemu-x86-64](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemux86-64/)| -| | qemu-arm | arm32 | | [qemu-arm](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemuarm/)| -| | qemu-arm64 | arm64 | | [qemu-arm64](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemuarm64/)| +| QEMU | qemu-x86-64 | x86 |[QEMU Quick Start](https://docs.automotivelinux.org/en/pike/#01_Getting_Started/01_Quickstart/01_Using_Ready_Made_Images/#_top)| [qemu-x86-64](https://download.automotivelinux.org/AGL/release/pike/latest/qemux86-64/)| +| | qemu-arm | arm32 | | [qemu-arm](https://download.automotivelinux.org/AGL/release/pike/latest/qemuarm/)| +| | qemu-arm64 | arm64 | | [qemu-arm64](https://download.automotivelinux.org/AGL/release/pike/latest/qemuarm64/)| | | | | -| RCar Gen 3 | h3ulcb | arm64 |[RCar Gen 3 Quick Start](https://docs.automotivelinux.org/en/master/#01_Getting_Started/01_Quickstart/01_Using_Ready_Made_Images/#3-r-car-h3sk-h3ulcb-board)| [h3ulcb-nogfx](https://download.automotivelinux.org/AGL/snapshots/master/latest/h3ulcb-nogfx/)| +| RCar Gen 3 | h3ulcb | arm64 |[RCar Gen 3 Quick Start](https://docs.automotivelinux.org/en/pike/#01_Getting_Started/01_Quickstart/01_Using_Ready_Made_Images/#3-r-car-h3sk-h3ulcb-board)| [h3ulcb-nogfx](https://download.automotivelinux.org/AGL/release/pike/latest/h3ulcb-nogfx/)| | | h3-salvator-x | arm64 | | | h3-kf | arm64 | | | m3ulcb | arm64 | @@ -28,7 +28,7 @@ The following table briefs about the various hardware platforms, supported by AG | | m3-kf | arm64 | | | agl-refhw | arm64 | | | | | -| Raspberry Pi | raspberrypi4 | arm64 |[Raspberry Pi Quick Start](https://docs.automotivelinux.org/en/master/#01_Getting_Started/01_Quickstart/01_Using_Ready_Made_Images/#2-raspberry-pi-4)|[raspberrypi4](https://download.automotivelinux.org/AGL/snapshots/master/latest/raspberrypi4/)| +| Raspberry Pi | raspberrypi4 | arm64 |[Raspberry Pi Quick Start](https://docs.automotivelinux.org/en/pike/#01_Getting_Started/01_Quickstart/01_Using_Ready_Made_Images/#2-raspberry-pi-4)|[raspberrypi4](https://download.automotivelinux.org/AGL/release/pike/latest/raspberrypi4/)| **Note:** Latest stable release source tar and binary for all the boards can be found [here](https://wiki.automotivelinux.org/agl-distro/release-notes#latest_stable_release) diff --git a/docs/03_Architecture_Guides/01_Introduction/01_Overview.md b/docs/03_Architecture_Guides/01_Introduction/01_Overview.md index f908ad4..56087f8 100644 --- a/docs/03_Architecture_Guides/01_Introduction/01_Overview.md +++ b/docs/03_Architecture_Guides/01_Introduction/01_Overview.md @@ -50,4 +50,4 @@ The Application Framework layer provides the APIs for creating both managing and applications on an AGL system. The Services layer contains user space services that all applications can access. The Operating System (OS) layer provides the Linux kernel and device drivers along with standard OS utilities. For IVI (In Vehicle Infotainment) -system a full fledged demo is [available](https://docs.automotivelinux.org/en/master/#01_Getting_Started/01_Quickstart/01_Using_Ready_Made_Images/). +system a full fledged demo is [available](https://docs.automotivelinux.org/en/pike/#01_Getting_Started/01_Quickstart/01_Using_Ready_Made_Images/). diff --git a/docs/04_Developer_Guides/01_Setting_Up_AGL_SDK.md b/docs/04_Developer_Guides/01_Setting_Up_AGL_SDK.md index d3f01fb..c404b1a 100644 --- a/docs/04_Developer_Guides/01_Setting_Up_AGL_SDK.md +++ b/docs/04_Developer_Guides/01_Setting_Up_AGL_SDK.md @@ -9,19 +9,19 @@ quickstart the service and application development process. Please open the link below and download .sh file for desired machine. - **Note:** The links provided are for the master branch. If you want SDK for specific branch than change the name from master to specific branch. + **Note:** The links provided are for the pike branch. If you want SDK for specific branch than change the name from pike to specific branch. - - **x86** : [qemux86-64](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemux86-64/deploy/sdk/) + - **x86** : [qemux86-64](https://download.automotivelinux.org/AGL/release/pike/latest/qemux86-64/deploy/sdk/) **Note:** .sh file will be with name "poky-agl-glibc-x86_64-agl-demo-platform-crosssdk-corei7-64-qemux86-64-toolchain-$(version number).sh" where version number is regularly updated on the site. - - **ARM 32 bit** : [qemuarm](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemuarm/deploy/sdk/) + - **ARM 32 bit** : [qemuarm](https://download.automotivelinux.org/AGL/release/pike/latest/qemuarm/deploy/sdk/) **Note:** .sh file will be with name " poky-agl-glibc-x86_64-agl-demo-platform-crosssdk-armv7vet2hf-neon-vfpv4-qemuarm-toolchain-$(version number).sh" where version number is regularly updated on the site. - - **AARCH64 - ARM 64bit** : [qemuarm64](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemuarm64/deploy/sdk/) + - **AARCH64 - ARM 64bit** : [qemuarm64](https://download.automotivelinux.org/AGL/release/pike/latest/qemuarm64/deploy/sdk/) **Note:** .sh file will be with name " poky-agl-glibc-x86_64-agl-demo-platform-crosssdk-aarch64-qemuarm64-toolchain-$(version number).sh" where version number is regularly updated on the site. |