diff options
| -rw-r--r-- | docs/0_Getting_Started/1_Quickstart/Using_Ready_Made_Images.md | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/docs/0_Getting_Started/1_Quickstart/Using_Ready_Made_Images.md b/docs/0_Getting_Started/1_Quickstart/Using_Ready_Made_Images.md index 436d62f..9d2f064 100644 --- a/docs/0_Getting_Started/1_Quickstart/Using_Ready_Made_Images.md +++ b/docs/0_Getting_Started/1_Quickstart/Using_Ready_Made_Images.md @@ -360,19 +360,19 @@ The AGL demo images do require 1920x1080. The instructions below have been adapt ### 3. R-Car H3SK (H3ULCB board) -**NOTE :** The prebuilt image doesn't support graphics (as of yet) and will run headless. For graphical support, a local build with the neccesary graphics driver is required. +**NOTE :** The prebuilt image does support graphics only in **non-accelerated** mode (software rendering). For **accelerated** graphics support, a local build with the neccesary graphics driver is required. 1. Update the [firmware](https://elinux.org/R-Car/Boards/H3SK#Flashing_firmware) using files from [here](https://download.automotivelinux.org/AGL/release/lamprey/latest/h3ulcb-nogfx/deploy/images/h3ulcb/). - 2. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/release/lamprey/latest/h3ulcb-nogfx/deploy/images/h3ulcb/agl-image-ivi-crosssdk-h3ulcb.wic.xz). + 2. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/release/lamprey/latest/h3ulcb-nogfx/deploy/images/h3ulcb/agl-demo-platform-crosssdk-h3ulcb.wic.xz). 3. Extract the image into the boot device : ```sh $ lsblk $ sudo umount <boot_device_name> - $ xzcat agl-image-ivi-crosssdk-h3ulcb.wic.xz | sudo dd of=<boot_device_name> bs=4M + $ xzcat agl-demo-platform-crosssdk-h3ulcb.wic.xz | sudo dd of=<boot_device_name> bs=4M $ sync ``` |