summaryrefslogtreecommitdiffstats
path: root/docs/0_Getting_Started
diff options
context:
space:
mode:
Diffstat (limited to 'docs/0_Getting_Started')
-rw-r--r--docs/0_Getting_Started/2_Building_AGL_Image/5_3_RCar_Gen_3.md27
1 files changed, 26 insertions, 1 deletions
diff --git a/docs/0_Getting_Started/2_Building_AGL_Image/5_3_RCar_Gen_3.md b/docs/0_Getting_Started/2_Building_AGL_Image/5_3_RCar_Gen_3.md
index d0030c4..f97996b 100644
--- a/docs/0_Getting_Started/2_Building_AGL_Image/5_3_RCar_Gen_3.md
+++ b/docs/0_Getting_Started/2_Building_AGL_Image/5_3_RCar_Gen_3.md
@@ -18,6 +18,15 @@ image for the following Renesas platforms:
The information on this page describes setup and build procedures for both of these
Renesas development kits.
+Additionally, the AGL Reference Hardware platform is based on the same Renesas
+H3 processor used on the Renesas R-Car Starter Kit Premier and Salvator-X boards,
+so support for it leverages the Starter Kit Premier (also known as "h3ulcb")
+build.
+For more information on the AGL reference hardware platform, please refer to its
+[manual](https://wiki.automotivelinux.org/_media/eg-rhsa/rh_manual_ver.1.0.pdf),
+or the Reference Hardware System Architecture Expert Group
+[wiki page](https://wiki.automotivelinux.org/eg-rhsa).
+
## 1. Downloading Proprietary Drivers
Before setting up the build environment, you need to download proprietary drivers from the
@@ -152,6 +161,8 @@ you need to take steps to make sure your build host is set up correctly.
| Starter Kit Premier/H3 + kingfisher support | `MACHINE`=h3ulcb-kf |
| Starter Kit Premier/H3 without graphic | `MACHINE`=h3ulcb-nogfx |
| Salvator-X | `MACHINE`=h3-salvator-x |
+ | AGL Reference Hardware | `MACHINE`=h3ulcb |
+ | AGL Reference Hardware without graphic | `MACHINE`=h3ulcb-nogfx |
For example, the following command defines and exports the `MACHINE` variable
for the Starter Kit Pro/M3 Board:
@@ -169,6 +180,14 @@ you need to take steps to make sure your build host is set up correctly.
$ source meta-agl/scripts/aglsetup.sh -m $MACHINE -b build agl-devel agl-demo
```
+ If building for the AGL Reference Hardware (with `MACHINE` set to "h3ulcb" or
+ "h3ulcb-nogfx"), add `agl-refhw-h3`, for example:
+
+ ```sh
+ $ cd $AGL_TOP
+ $ source meta-agl/scripts/aglsetup.sh -m $MACHINE -b build agl-devel agl-demo agl-refhw-h3
+ ```
+
**NOTE:**
Running the `aglsetup.sh` script automatically places you in the
working directory (i.e. `$AGL_TOP/build`).
@@ -371,6 +390,10 @@ Follow these steps to update the firmware:
```
**NOTE:** The Salvator-X firmware update process is not documented on eLinux.
+ **NOTE:** The AGL Reference Hardware board generally should not require a
+ firmware update to be usable, and has a slightly different update procedure.
+ If you do need to update the firmware, the procedure is documented
+ [here](https://git.automotivelinux.org/AGL/meta-agl-refhw/tree/meta-agl-refhw-gen3/docs/ReferenceHW_Rcar_gen3.md).
### Preparing the MicroSD Card
@@ -691,6 +714,8 @@ boot device and also to set the screen resolution:
* **M3SK with a Kingfisher board** : `$ setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/r8a7796-m3ulcb-kf.dtb`
+ * **AGL Reference Hardware board** : `$ setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/r8a7795-agl-refhw.dtb`
+
5. Save the boot environment:
```sh
saveenv
@@ -709,7 +734,7 @@ Once the board boots, you should see the
on the external monitor.
A login prompt should appear as follows depending on your board:
-**h3ulcb**:
+**h3ulcb** or **AGL Reference Hardware**:
```text
Automotive Grade Linux ${AGL_VERSION} h3ulcb ttySC0