diff options
Diffstat (limited to 'docs/0_Getting_Started')
7 files changed, 28 insertions, 28 deletions
diff --git a/docs/0_Getting_Started/1_Quickstart/Using_Ready_Made_Images.md b/docs/0_Getting_Started/1_Quickstart/Using_Ready_Made_Images.md index eaae38e..38faa06 100644 --- a/docs/0_Getting_Started/1_Quickstart/Using_Ready_Made_Images.md +++ b/docs/0_Getting_Started/1_Quickstart/Using_Ready_Made_Images.md @@ -8,9 +8,9 @@ AGL provides a number of pre-built ready-made images of various versions. ### 1. QEMU (Emulation) -1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemux86-64/deploy/images/qemux86-64/agl-demo-platform-crosssdk-qemux86-64.ext4.xz). +1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/marlin/latest/qemux86-64/deploy/images/qemux86-64/agl-demo-platform-crosssdk-qemux86-64.ext4.xz). -2. Download the [compressed kernel image](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemux86-64/deploy/images/qemux86-64/bzImage). +2. Download the [compressed kernel image](https://download.automotivelinux.org/AGL/snapshots/marlin/latest/qemux86-64/deploy/images/qemux86-64/bzImage). 3. Install [QEMU](https://www.qemu.org/download/) : @@ -78,7 +78,7 @@ AGL provides a number of pre-built ready-made images of various versions. **NOTE :** Please note [https://www.virtualbox.org/ticket/19873](https://www.virtualbox.org/ticket/19873) as this affects the VMs resolution. The AGL demo images do require 1920x1080. The instructions below have been adapted. - 1. Download the [compressed vbox disk image](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemux86-64/deploy/images/qemux86-64/agl-demo-platform-crosssdk-qemux86-64.wic.vmdk.xz). + 1. Download the [compressed vbox disk image](https://download.automotivelinux.org/AGL/snapshots/marlin/latest/qemux86-64/deploy/images/qemux86-64/agl-demo-platform-crosssdk-qemux86-64.wic.vmdk.xz). 2. Install and set up [Virtual Box](https://www.virtualbox.org/wiki/Linux_Downloads). @@ -110,7 +110,7 @@ The AGL demo images do require 1920x1080. The instructions below have been adapt **NOTE :** UEFI enabled system is required. - 1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemux86-64/deploy/images/qemux86-64/agl-demo-platform-crosssdk-qemux86-64.wic.xz). + 1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/marlin/latest/qemux86-64/deploy/images/qemux86-64/agl-demo-platform-crosssdk-qemux86-64.wic.xz). 2. Extract the image into USB drive : @@ -128,9 +128,9 @@ The AGL demo images do require 1920x1080. The instructions below have been adapt ### 1. QEMU (Emulation) -1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemuarm/deploy/images/qemuarm/agl-demo-platform-crosssdk-qemuarm.ext4.xz). +1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/marlin/latest/qemuarm/deploy/images/qemuarm/agl-demo-platform-crosssdk-qemuarm.ext4.xz). -2. Download the [compressed kernel image](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemuarm/deploy/images/qemuarm/zImage). +2. Download the [compressed kernel image](https://download.automotivelinux.org/AGL/snapshots/marlin/latest/qemuarm/deploy/images/qemuarm/zImage). 3. Install [QEMU](https://www.qemu.org/download/) : @@ -199,7 +199,7 @@ The AGL demo images do require 1920x1080. The instructions below have been adapt ### 2. BeagleBone Enhanced (BBE) - 1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/master/latest/bbe/deploy/images/bbe/agl-demo-platform-crosssdk-bbe.wic.xz). + 1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/marlin/latest/bbe/deploy/images/bbe/agl-demo-platform-crosssdk-bbe.wic.xz). 2. Extract the image into the SD card of BeagleBone Enhanced : @@ -224,9 +224,9 @@ The AGL demo images do require 1920x1080. The instructions below have been adapt ### 1. QEMU (Emulation) -1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemuarm64/deploy/images/qemuarm64/agl-demo-platform-crosssdk-qemuarm64.ext4.xz). +1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/marlin/latest/qemuarm64/deploy/images/qemuarm64/agl-demo-platform-crosssdk-qemuarm64.ext4.xz). -2. Download the [compressed kernel image](https://download.automotivelinux.org/AGL/snapshots/master/latest/qemuarm64/deploy/images/qemuarm64/Image). +2. Download the [compressed kernel image](https://download.automotivelinux.org/AGL/snapshots/marlin/latest/qemuarm64/deploy/images/qemuarm64/Image). 3. Install [QEMU](https://www.qemu.org/download/) : @@ -295,7 +295,7 @@ The AGL demo images do require 1920x1080. The instructions below have been adapt ### 2. Raspberry Pi 4 - 1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/master/latest/raspberrypi4/deploy/images/raspberrypi4-64/agl-demo-platform-crosssdk-raspberrypi4-64.wic.xz). + 1. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/marlin/latest/raspberrypi4/deploy/images/raspberrypi4-64/agl-demo-platform-crosssdk-raspberrypi4-64.wic.xz). 2. Extract the image into the SD card of Raspberry Pi 4 : @@ -363,9 +363,9 @@ The AGL demo images do require 1920x1080. The instructions below have been adapt **NOTE :** The prebuilt image does support **non-accelerated** graphics mode (software rendering). For **accelerated** graphics support, a local build with the neccesary graphics driver is required. - 1. Update the [firmware](https://elinux.org/R-Car/Boards/H3SK#Flashing_firmware) using files from [here](https://download.automotivelinux.org/AGL/snapshots/master/latest/h3ulcb-nogfx/deploy/images/h3ulcb/). + 1. Update the [firmware](https://elinux.org/R-Car/Boards/H3SK#Flashing_firmware) using files from [here](https://download.automotivelinux.org/AGL/snapshots/marlin/latest/h3ulcb-nogfx/deploy/images/h3ulcb/). - 2. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/master/latest/h3ulcb-nogfx/deploy/images/h3ulcb/agl-demo-platform-crosssdk-h3ulcb.wic.xz). + 2. Download the [compressed prebuilt image](https://download.automotivelinux.org/AGL/snapshots/marlin/latest/h3ulcb-nogfx/deploy/images/h3ulcb/agl-demo-platform-crosssdk-h3ulcb.wic.xz). 3. Extract the image into the boot device : diff --git a/docs/0_Getting_Started/2_Building_AGL_Image/1_Preparing_Your_Build_Host.md b/docs/0_Getting_Started/2_Building_AGL_Image/1_Preparing_Your_Build_Host.md index 6acdfdd..6834b44 100644 --- a/docs/0_Getting_Started/2_Building_AGL_Image/1_Preparing_Your_Build_Host.md +++ b/docs/0_Getting_Started/2_Building_AGL_Image/1_Preparing_Your_Build_Host.md @@ -17,7 +17,7 @@ the Yocto Project documentation **NOTE:** This entire section presumes you want to build an image. You can skip the entire build process if you want to use a ready-made development image. -The [supported images](https://download.automotivelinux.org/AGL/snapshots/master/latest/) exist for several boards as +The [supported images](https://download.automotivelinux.org/AGL/snapshots/marlin/latest/) exist for several boards as well as for the Quick EMUlator (QEMU). See the "[Quickstart](../1_Quickstart/Using_Ready_Made_Images.md)" @@ -26,7 +26,7 @@ section for more information on the ready-made images. 1. **Use a Supported Linux Distribution:** To use the AGL software, it is recommended that your build host is a native Linux machine that runs a Yocto Project supported distribution as described by the - "[Supported Linux Distributions](https://www.yoctoproject.org/docs/3.1.4/ref-manual/ref-manual.html#detailed-supported-distros)" + "[Supported Linux Distributions](https://www.yoctoproject.org/docs/3.1.14/ref-manual/ref-manual.html#detailed-supported-distros)" section in the Yocto Project Reference Manual. Basically, you should be running a recent version of Ubuntu, Fedora, openSUSE, CentOS, or Debian. @@ -42,7 +42,7 @@ section for more information on the ready-made images. * Python 3.4.0 or greater If your distribution does not meet these minimal requirements, see the - "[Required Git, tar, and Python Versions](https://www.yoctoproject.org/docs/3.1.4/ref-manual/ref-manual.html#required-git-tar-and-python-versions)" + "[Required Git, tar, and Python Versions](https://www.yoctoproject.org/docs/3.1.14/ref-manual/ref-manual.html#required-git-tar-and-python-versions)" section in the Yocto Project Reference Manual for steps that you can take to be sure you have these tools. @@ -51,13 +51,13 @@ section for more information on the ready-made images. Depending on the Linux distribution you are using, the list of host packages differ. See - "[The Build Host Packages](https://www.yoctoproject.org/docs/3.1.4/yocto-project-qs/yocto-project-qs.html#packages)" + "[The Build Host Packages](https://www.yoctoproject.org/docs/3.1.14/yocto-project-qs/yocto-project-qs.html#packages)" section of the Yocto Project Quick Start for information on the packages you need. **NOTE:** If you are using the CentOS distribution, you need to separately install the epel-release package and run the `makecache` command as described in - "[The Build Host Packages](https://www.yoctoproject.org/docs/3.1.4/yocto-project-qs/yocto-project-qs.html#packages)" + "[The Build Host Packages](https://www.yoctoproject.org/docs/3.1.14/yocto-project-qs/yocto-project-qs.html#packages)" section of the Yocto Project Quick Start. Aside from the packages listed in the previous section, you need the following: diff --git a/docs/0_Getting_Started/2_Building_AGL_Image/2_Downloading_AGL_Software.md b/docs/0_Getting_Started/2_Building_AGL_Image/2_Downloading_AGL_Software.md index ee18805..c0ca7b7 100644 --- a/docs/0_Getting_Started/2_Building_AGL_Image/2_Downloading_AGL_Software.md +++ b/docs/0_Getting_Started/2_Building_AGL_Image/2_Downloading_AGL_Software.md @@ -51,14 +51,14 @@ The remainder of this section provides steps on how to download the AGL source f Using the latest stable release gives you a solid snapshot of the latest know release. The release is static, tested, and known to work. - To download the latest stable release branch (i.e. Jellyfish), use + To download the latest stable release branch (i.e. marlin), use the following commands: ```sh $ cd $AGL_TOP - $ mkdir koi - $ cd koi - $ repo init -b koi -u https://gerrit.automotivelinux.org/gerrit/AGL/AGL-repo + $ mkdir marlin + $ cd marlin + $ repo init -b marlin -u https://gerrit.automotivelinux.org/gerrit/AGL/AGL-repo $ repo sync ``` diff --git a/docs/0_Getting_Started/2_Building_AGL_Image/3_Initializing_Your_Build_Environment.md b/docs/0_Getting_Started/2_Building_AGL_Image/3_Initializing_Your_Build_Environment.md index efe7001..61de443 100644 --- a/docs/0_Getting_Started/2_Building_AGL_Image/3_Initializing_Your_Build_Environment.md +++ b/docs/0_Getting_Started/2_Building_AGL_Image/3_Initializing_Your_Build_Environment.md @@ -10,7 +10,7 @@ run to initialize the build environment. You can find this script here: ```sh -$AGL_TOP/master/meta-agl/scripts/aglsetup.sh +$AGL_TOP/marlin/meta-agl/scripts/aglsetup.sh ``` The script accepts many options that allow you to define build parameters such @@ -18,7 +18,7 @@ as the target hardware (i.e. the machine), build directory, and so forth. Use the following commands to see the available options and script syntax: ```sh -$ cd $AGL_TOP/master +$ cd $AGL_TOP/marlin $ source meta-agl/scripts/aglsetup.sh -h ``` @@ -222,7 +222,7 @@ Common targets are: Running the script creates the Build Directory if it does not already exist. The default Build Directory is `$AGL_TOP/<release-branch-name>/build`, and the nomenclature to be used throughout this doc is going to be `$AGL_TOP/<release-branch-name>/<build-dir>` -For this example, the Build Directory is `$AGL_TOP/master/qemux86-64`. +For this example, the Build Directory is `$AGL_TOP/marlin/qemux86-64`. The script's output also indicates the machine and AGL features selected for the build. diff --git a/docs/0_Getting_Started/2_Building_AGL_Image/4_Customizing_Your_Build.md b/docs/0_Getting_Started/2_Building_AGL_Image/4_Customizing_Your_Build.md index d1d4101..dd67e9e 100644 --- a/docs/0_Getting_Started/2_Building_AGL_Image/4_Customizing_Your_Build.md +++ b/docs/0_Getting_Started/2_Building_AGL_Image/4_Customizing_Your_Build.md @@ -128,7 +128,7 @@ using mirrors. To use mirrors, add this line to your `local.conf` file in the Build directory: ```sh -SSTATE_MIRRORS_append = " file://.* https://download.automotivelinux.org/sstate-mirror/master/${DEFAULTTUNE}/PATH \n " +SSTATE_MIRRORS_append = " file://.* https://download.automotivelinux.org/sstate-mirror/marlin/${DEFAULTTUNE}/PATH \n " ``` You can learn more about shared state and how it is used in the @@ -141,7 +141,7 @@ section of the Yocto Project Reference Manual. $ echo '# reuse download directories' >> $AGL_TOP/site.conf $ echo 'DL_DIR = "$HOME/downloads/"' >> $AGL_TOP/site.conf $ echo 'SSTATE_DIR = "$AGL_TOP/sstate-cache/"' >> $AGL_TOP/site.conf -$ cd $AGL_TOP/master/qemux86-64/ +$ cd $AGL_TOP/marlin/qemux86-64/ $ ln -sf $AGL_TOP/site.conf conf/ In General; diff --git a/docs/0_Getting_Started/2_Building_AGL_Image/5_1_x86_Emulation_and_Hardware.md b/docs/0_Getting_Started/2_Building_AGL_Image/5_1_x86_Emulation_and_Hardware.md index 7282f66..02c9097 100644 --- a/docs/0_Getting_Started/2_Building_AGL_Image/5_1_x86_Emulation_and_Hardware.md +++ b/docs/0_Getting_Started/2_Building_AGL_Image/5_1_x86_Emulation_and_Hardware.md @@ -133,7 +133,7 @@ If you built your image with bitbake, you can now just use the ``runqemu`` wrapp For this example : ```sh -$ source $AGL_TOP/master/qemux86-64/agl-init-build-env +$ source $AGL_TOP/marlin/qemux86-64/agl-init-build-env ``` In general : diff --git a/docs/0_Getting_Started/2_Building_AGL_Image/5_3_RCar_Gen_3.md b/docs/0_Getting_Started/2_Building_AGL_Image/5_3_RCar_Gen_3.md index b7f6cd0..84965d8 100644 --- a/docs/0_Getting_Started/2_Building_AGL_Image/5_3_RCar_Gen_3.md +++ b/docs/0_Getting_Started/2_Building_AGL_Image/5_3_RCar_Gen_3.md @@ -65,7 +65,7 @@ Follow these steps to download the drivers you need: | AGL Version | Renesas version | |:-:|:-:| - | AGL master | 5.9.0 | + | AGL marlin | 5.9.0 | 3. **Download the Files:** |