summaryrefslogtreecommitdiffstats
path: root/docs/2_Hardware_Support
diff options
context:
space:
mode:
Diffstat (limited to 'docs/2_Hardware_Support')
-rw-r--r--docs/2_Hardware_Support/Renesas_Gen3_Boards /1_meta-rcar-gen3_Layer.md242
-rw-r--r--docs/2_Hardware_Support/Renesas_Gen3_Boards /2_Proprietary_Drivers.md228
2 files changed, 0 insertions, 470 deletions
diff --git a/docs/2_Hardware_Support/Renesas_Gen3_Boards /1_meta-rcar-gen3_Layer.md b/docs/2_Hardware_Support/Renesas_Gen3_Boards /1_meta-rcar-gen3_Layer.md
deleted file mode 100644
index cbbcedf..0000000
--- a/docs/2_Hardware_Support/Renesas_Gen3_Boards /1_meta-rcar-gen3_Layer.md
+++ /dev/null
@@ -1,242 +0,0 @@
----
-edit_link: ''
-title: meta-rcar-gen3 Layer
-origin_url: >-
- https://git.automotivelinux.org/AGL/meta-renesas-rcar-gen3/plain/meta-rcar-gen3/README.md?h=master
----
-
-<!-- WARNING: This file is generated by fetch_docs.js using /home/boron/Documents/AGL/docs-webtemplate/site/_data/tocs/hardware/master/renesas-gen3-boards-docs-book.yml -->
-
-# meta-rcar-gen3
-
-
-This layer provides the support for the evaluation board mounted ARM SoCs of
-Renesas Electronics, called the R-Car Generation 3.
-
-Currently, this supports boards and the SoCs of the following:
-
-```bash
- - Board: Salvator-X / SoC: R8A7795 (R-Car H3), R8A7796 (R-Car M3), R8A77965 (R-Car M3N)
- - Board: R-Car Starter Kit premier(H3ULCB) / SoC: R8A7795 (R-Car H3)
- - Board: R-Car Starter Kit pro(M3ULCB) / SoC: R8A7796 (R-Car M3)
- - Board: R-Car Starter Kit pro(M3NULCB) / SoC: R8A77965 (R-Car M3N)
- - Board: Ebisu / SoC: R8A77990 (R-Car E3)
-```
-
-## Branch Policy
-
-
-* This is Community Yocto BSP to follow Yocto/Poky releases.
-
-* It is not supported to the level of the Customer Yocto BSP.
-
-## Tag Policy
-
-
-* Releases are created from the respective working branch.
-
-* After a Customer Yocto BSP version releases, the Community Yocto BSP will be
-rebased and released accordingly.
-
-* dunfell-X:
-
- * The versions used on dunfell (Yocto Project 3.1) will start on
- dunfell-Yocto-v3.21.0 to keep the major version numbers in sync.
-
-## Contribution
-
-
-* Please submit any patches for this layer to: takamitsu.honda.pv@renesas.com
-
-* Please see the MAINTAINERS file for more details.
-
-## Layer Dependencies
-
-
-This layer depends on:
-
-* poky
-
-```bash
- URI: git://git.yoctoproject.org/poky
- layers: meta, meta-poky, meta-yocto-bsp
- branch: dunfell
-```
-
-* meta-openembedded
-
-```bash
- URI: git://git.openembedded.org/meta-openembedded
- layers: meta-oe, meta-python
- branch: dunfell
-```
-
-## Build Instructions
-
-
-The following instructions require a Poky installation (or equivalent).
-
-* This also needs git user name and email defined:
-
-```bash
- $ git config --global user.email "you@example.com"
- $ git config --global user.name "Your Name"
-```
-
-* Initialize a build using the 'oe-init-build-env' script in Poky. e.g.:
-
-```bash
- $ source poky/oe-init-build-env
-```
-
-* After that, initialized configure bblayers.conf by adding meta-rcar-gen3 layer.
-e.g.:
-
-```bash
- BBLAYERS ?= " \
- <path to layer>/poky/meta \
- <path to layer>/poky/meta-poky \
- <path to layer>/poky/meta-yocto-bsp \
- <path to layer>/meta-renesas/meta-rcar-gen3 \
- <path to layer>/meta-openembedded/meta-python \
- <path to layer>/meta-openembedded/meta-oe \
- "
-```
-
-* To build a specific target BSP, configure the associated machine in local.conf:
-
-```bash
- MACHINE ??= "<supported board name>"
-```
-
-Board|MACHINE
------|-------
-Salvator-X/XS|MACHINE="salvator-x"
-Ebisu|MACHINE="ebisu"
-Starter Kit Pro (M3ULCB)|MACHINE="m3ulcb"
-Starter Kit Pro (M3NULCB)|MACHINE="m3nulcb"
-Starter Kit Premier (H3ULCB)|MACHINE="h3ulcb"
-
-* Select the SOC
-
- * For H3: r8a7795
-
- ```bash
- SOC_FAMILY = "r8a7795"
- ```
-
- * For M3: r8a7796
-
- ```bash
- SOC_FAMILY = "r8a7796"
- ```
-
- * For M3N: r8a77965
-
- ```bash
- SOC_FAMILY = "r8a77965"
- ```
-
- * For E3: r8a77990
-
- ```bash
- # Already added in machine config: ebisu.conf
- SOC_FAMILY = "r8a77990"
- ```
-
-* Configure for systemd init in local.conf:
-
-```bash
- DISTRO_FEATURES_append = " systemd"
- VIRTUAL-RUNTIME_init_manager = "systemd"
-```
-
-* Configure for ivi-shell and ivi-extension
-
-```bash
- DISTRO_FEATURES_append = " ivi-shell"
-```
-
-* Configure for USB 3.0
-
-```bash
- MACHINE_FEATURES_append = " usb3"
-```
-
-* Enable tuning support for Capacity Aware migration Strategy (CAS)
-
-```bash
- MACHINE_FEATURES_append = " cas"
-```
-
-* For a list of sample local.conf file, please refer to: [docs/sample/conf/](docs/sample/conf/)
-
-* Build the target file system image using bitbake:
-
-```bash
- $ bitbake core-image-minimal
-```
-
-After completing the images for the target machine will be available in the
-output directory 'tmp/deploy/images/<supported board name>'.
-
-Images generated:
-
-* Image (generic Linux Kernel binary image file)
-
-* \<SoC\>-\<machine name\>.dtb (DTB for target machine)
-
-* core-image-minimal-\<machine name\>.tar.bz2 (rootfs tar+bzip2)
-
-* core-image-minimal-\<machine name\>.ext4 (rootfs ext4 format)
-
-## Build Instructions for SDK
-
-
-NOTE:
-
-**This may be changed in the near feature. These instructions are tentative.**
-
-Should define the staticdev in SDK image feature for installing the static libs
-to SDK in local.conf.
-
-```bash
- SDKIMAGE_FEATURES_append = " staticdev-pkgs"
-```
-
-### For 64-bit target SDK (aarch64)
-
-
-Use `bitbake -c populate_sdk` for generating the toolchain SDK
-
-```bash
- $ bitbake core-image-minimal -c populate_sdk
-```
-
-The SDK can be found in the output directory `tmp/deploy/sdk`
-
-* `poky-glibc-x86_64-core-image-minimal-aarch64-toolchain-x.x.sh`
-
-### Usage of toolchain SDK
-
-
-Install the SDK to the default: `/opt/poky/x.x`
-
-* For 64-bit target SDK
-
-```bash
- $ sh poky-glibc-x86_64-core-image-minimal-aarch64-toolchain-x.x.sh
-```
-
-* For 64-bit application, using environment script in `/opt/poky/x.x`
-
-```bash
- $ source /opt/poky/x.x/environment-setup-aarch64-poky-linux
-```
-
-## R-Car Generation 3 Information
-
-
-Refer to the following for more information from eLinux website
-
-https://elinux.org/R-Car
diff --git a/docs/2_Hardware_Support/Renesas_Gen3_Boards /2_Proprietary_Drivers.md b/docs/2_Hardware_Support/Renesas_Gen3_Boards /2_Proprietary_Drivers.md
deleted file mode 100644
index a56d667..0000000
--- a/docs/2_Hardware_Support/Renesas_Gen3_Boards /2_Proprietary_Drivers.md
+++ /dev/null
@@ -1,228 +0,0 @@
----
-edit_link: ''
-title: Proprietary Drivers
-origin_url: >-
- https://git.automotivelinux.org/AGL/meta-renesas-rcar-gen3/plain/meta-rcar-gen3/README.proprietary.md?h=master
----
-
-<!-- WARNING: This file is generated by fetch_docs.js using /home/boron/Documents/AGL/docs-webtemplate/site/_data/tocs/hardware/master/renesas-gen3-boards-docs-book.yml -->
-
-# Proprietary libraries for meta-rcar-gen3
-
-
-The meta-rcar-gen3 layer of meta-renesas is supported Graphic GLES(GSX)
-libraries, proprietary library of multimedia, and ICCOM software.
-
-This README describes how to use these features and setting to local.conf.
-
-```bash
- I/ Board configuration
- II/ Build with GLES
- III/ Build with Renesas multimedia libraries
- IV/ Enable Linux ICCOM driver and Linux ICCOM library
-```
-
-There are 2 main paths:
-
-* Please check section II to config for GLES.
-* Please check section III to enable Multimedia functions.
-
-If you would like to use Linux ICCOM driver and Linux ICCOM library, please
-check section IV.
-
-**NOTE:**
-
-* However, to have a completed local.conf, please also refer to Build
-Instruction in [meta-renesas/meta-rcar-gen3/README.md](README.md).
-
-* In addition, these libraries are not provided with recipes. If you would like
-to use, you will need to get them from Renesas.
-
-## I/ Board configuration
-
-
-* Add this line to local.conf
-
- * For Salvator-X board
-
- ```bash
- MACHINE = "salvator-x"
- ```
-
- * For R-Car Starter Kit Premier(H3ULCB) board
-
- ```bash
- MACHINE = "h3ulcb"
- ```
-
- * For R-Car Starter Kit Pro(M3ULCB) board
-
- ```bash
- MACHINE = "m3ulcb"
- ```
-
- * For R-Car Starter Kit Pro(M3NULCB) board
-
- ```bash
- MACHINE = "m3nulcb"
- ```
-
- * For Ebisu board
-
- ```bash
- MACHINE = "ebisu"
- ```
-
-* Set SOC family name
-
- * For H3: r8a7795
-
- ```bash
- SOC_FAMILY = "r8a7795"
- ```
-
- * For M3: r8a7796
-
- ```bash
- SOC_FAMILY = "r8a7796"
- ```
-
- * For M3N: r8a77965
-
- ```bash
- SOC_FAMILY = "r8a77965"
- ```
-
- * For E3: r8a77990
-
- ```bash
- # Already added in machine config: ebisu.conf
- SOC_FAMILY = "r8a77990"
- ```
-
-## II/ Build with GLES
-
-
-For wayland with GSX
-
-* Please copy proprietary libraries to the directory of recipes.
-
-* Set local.conf the following.
-
-```bash
- # Enable Gfx Pkgs
- MACHINE_FEATURES_append = " gsx"
- MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
-
- # for Wayland/Weston
- DISTRO_FEATURES_NATIVESDK_append = " wayland"
- DISTRO_FEATURES_append = " pam"
- PREFERRED_PROVIDER_virtual/libgles1 = ""
- PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
- PREFERRED_PROVIDER_virtual/egl = "libegl"
- PREFERRED_PROVIDER_virtual/libgl = ""
- PREFERRED_PROVIDER_virtual/mesa = ""
- PREFERRED_PROVIDER_libgbm = "libgbm"
- PREFERRED_PROVIDER_libgbm-dev = "libgbm"
- BBMASK = "mesa-gl"
-```
-
-* Run `bitbake core-image-weston`
-
-## III/ Build with Renesas multimedia libraries
-
-
-Multimedia portions depend on GLES portions.
-
-### A/ Configuration for Multimedia features
-
-
-* Please copy proprietary libraries to the directory of recipes.
-
-* Please set local.conf the following.
-
-```bash
- # Enable multimedia features.
- # This provides package group of plug-ins of the GStreamer, multimedia
- # libraries and kernel drivers.
-
- MACHINE_FEATURES_append = " multimedia"
-```
-
-### B/ Configuration for optional codecs and middleware
-
-
-* Please copy proprietary libraries to the directory of recipes.
-
-* Add features to DISTRO_FEATURES_append to local.conf
-
-```bash
- # Additional configuration in OMX module
- " h263dec_lib" - for OMX Media Component H263 Decoder Library
- " h264dec_lib" - for OMX Media Component H264 Decoder Library
- " h264enc_lib" - for OMX Media Component H.264 Encoder Library
- " h265dec_lib" - for OMX Media Component H265 Decoder Library
- " mpeg2dec_lib" - for OMX Media Component MPEG2 Decoder Library
- " mpeg4dec_lib" - for OMX Media Component MPEG4 Decoder Library
- " vc1dec_lib" - for OMX Media Component VC-1 Decoder Library
- " divxdec_lib" - for OMX Media Component DivX Decoder Library
- " rvdec_lib" - for OMX Media Component RealVideo Decoder Library
- " alacdec_lib" - for OMX Media Component ALAC Decoder Library
- " flacdec_lib" - for OMX Media Component FLAC Decoder Library
- " aaclcdec_lib" - for OMX Media Component AAC-LC Decoder Library
- " aaclcdec_mdw" - for AAC-LC 2ch Decoder Middleware for Linux
- " aacpv2dec_lib" - for OMX Media Component aacPlus V2 Decoder Library
- " aacpv2dec_mdw" - for aacPlus V2 Decoder Middleware for Linux
- " mp3dec_lib" - for OMX Media Component MP3 Decoder Library
- " mp3dec_mdw" - for MP3 Decoder Middleware for Linux
- " wmadec_lib" - for OMX Media Component WMA Standard Decoder Library
- " wmadec_mdw" - for WMA Standard Decoder Middleware for Linux
- " dddec_lib" - for OMX Media Component Dolby(R) Digital Decoder Library
- " dddec_mdw" - for Dolby(R) Digital Decoder Middleware for Linux
- " aaclcenc_lib" - for OMX Media Component AAC-LC Encoder Library
- " vp8dec_lib" - for OMX Media Component VP8 Decoder Library for Linux
- " vp8enc_lib" - for OMX Media Component VP8 Encoder Library for Linux
- " vp9dec_lib" - for OMX Media Component VP9 Decoder Library for Linux
- " aaclcenc_mdw" - for AAC-LC Encoder Middleware for Linux
- " cmsbcm" - for CMS Basic Color Management Middleware for Linux
- " cmsblc" - for CMS CMM3 Backlight Control Middleware for Linux
- " cmsdgc" - for CMS VSP2 Dynamic Gamma Correction Middleware for Linux
- " dtv" - for ISDB-T DTV Software Package for Linux
- " dvd" - for DVD Core-Middleware for Linux
- " adsp" - for ADSP driver, ADSP interface and ADSP framework for Linux
- " avb" - for AVB Software Package for Linux
-```
-
-Ex:
-```
- DISTRO_FEATURES_append = " h264dec_lib h265dec_lib mpeg2dec_lib aaclcdec_lib aaclcdec_mdw"
-```
-
-### C/ Configuration for test packages
-
-
-Must ensure that Multimedia features have been enabled.
-(Please refer to III/A to enable Multimedia.)
-
-* Please add feature to DISTRO_FEATURES_append to local.conf.
-
-```bash
- # Configuration for multimedia test package
-
- DISTRO_FEATURES_append = " mm-test"
-```
-
-## IV/ Enable Linux ICCOM driver and Linux ICCOM library
-
-
-For Linux ICCOM driver and Linux ICCOM library
-
-* Please copy proprietary libraries to the directory of recipes.
-
-* Please set local.conf the following.
-
-```bash
- DISTRO_FEATURES_append = " iccom"
-```
-END.
-