diff options
Diffstat (limited to 'docs/2_Hardware_Support')
| -rw-r--r-- | docs/2_Hardware_Support/Renesas_Gen3_Boards /1_meta-rcar-gen3_Layer.md | 242 | ||||
| -rw-r--r-- | docs/2_Hardware_Support/Renesas_Gen3_Boards /2_Proprietary_Drivers.md | 228 |
2 files changed, 0 insertions, 470 deletions
diff --git a/docs/2_Hardware_Support/Renesas_Gen3_Boards /1_meta-rcar-gen3_Layer.md b/docs/2_Hardware_Support/Renesas_Gen3_Boards /1_meta-rcar-gen3_Layer.md deleted file mode 100644 index cbbcedf..0000000 --- a/docs/2_Hardware_Support/Renesas_Gen3_Boards /1_meta-rcar-gen3_Layer.md +++ /dev/null @@ -1,242 +0,0 @@ ---- -edit_link: '' -title: meta-rcar-gen3 Layer -origin_url: >- - https://git.automotivelinux.org/AGL/meta-renesas-rcar-gen3/plain/meta-rcar-gen3/README.md?h=master ---- - -<!-- WARNING: This file is generated by fetch_docs.js using /home/boron/Documents/AGL/docs-webtemplate/site/_data/tocs/hardware/master/renesas-gen3-boards-docs-book.yml --> - -# meta-rcar-gen3 - - -This layer provides the support for the evaluation board mounted ARM SoCs of -Renesas Electronics, called the R-Car Generation 3. - -Currently, this supports boards and the SoCs of the following: - -```bash - - Board: Salvator-X / SoC: R8A7795 (R-Car H3), R8A7796 (R-Car M3), R8A77965 (R-Car M3N) - - Board: R-Car Starter Kit premier(H3ULCB) / SoC: R8A7795 (R-Car H3) - - Board: R-Car Starter Kit pro(M3ULCB) / SoC: R8A7796 (R-Car M3) - - Board: R-Car Starter Kit pro(M3NULCB) / SoC: R8A77965 (R-Car M3N) - - Board: Ebisu / SoC: R8A77990 (R-Car E3) -``` - -## Branch Policy - - -* This is Community Yocto BSP to follow Yocto/Poky releases. - -* It is not supported to the level of the Customer Yocto BSP. - -## Tag Policy - - -* Releases are created from the respective working branch. - -* After a Customer Yocto BSP version releases, the Community Yocto BSP will be -rebased and released accordingly. - -* dunfell-X: - - * The versions used on dunfell (Yocto Project 3.1) will start on - dunfell-Yocto-v3.21.0 to keep the major version numbers in sync. - -## Contribution - - -* Please submit any patches for this layer to: takamitsu.honda.pv@renesas.com - -* Please see the MAINTAINERS file for more details. - -## Layer Dependencies - - -This layer depends on: - -* poky - -```bash - URI: git://git.yoctoproject.org/poky - layers: meta, meta-poky, meta-yocto-bsp - branch: dunfell -``` - -* meta-openembedded - -```bash - URI: git://git.openembedded.org/meta-openembedded - layers: meta-oe, meta-python - branch: dunfell -``` - -## Build Instructions - - -The following instructions require a Poky installation (or equivalent). - -* This also needs git user name and email defined: - -```bash - $ git config --global user.email "you@example.com" - $ git config --global user.name "Your Name" -``` - -* Initialize a build using the 'oe-init-build-env' script in Poky. e.g.: - -```bash - $ source poky/oe-init-build-env -``` - -* After that, initialized configure bblayers.conf by adding meta-rcar-gen3 layer. -e.g.: - -```bash - BBLAYERS ?= " \ - <path to layer>/poky/meta \ - <path to layer>/poky/meta-poky \ - <path to layer>/poky/meta-yocto-bsp \ - <path to layer>/meta-renesas/meta-rcar-gen3 \ - <path to layer>/meta-openembedded/meta-python \ - <path to layer>/meta-openembedded/meta-oe \ - " -``` - -* To build a specific target BSP, configure the associated machine in local.conf: - -```bash - MACHINE ??= "<supported board name>" -``` - -Board|MACHINE ------|------- -Salvator-X/XS|MACHINE="salvator-x" -Ebisu|MACHINE="ebisu" -Starter Kit Pro (M3ULCB)|MACHINE="m3ulcb" -Starter Kit Pro (M3NULCB)|MACHINE="m3nulcb" -Starter Kit Premier (H3ULCB)|MACHINE="h3ulcb" - -* Select the SOC - - * For H3: r8a7795 - - ```bash - SOC_FAMILY = "r8a7795" - ``` - - * For M3: r8a7796 - - ```bash - SOC_FAMILY = "r8a7796" - ``` - - * For M3N: r8a77965 - - ```bash - SOC_FAMILY = "r8a77965" - ``` - - * For E3: r8a77990 - - ```bash - # Already added in machine config: ebisu.conf - SOC_FAMILY = "r8a77990" - ``` - -* Configure for systemd init in local.conf: - -```bash - DISTRO_FEATURES_append = " systemd" - VIRTUAL-RUNTIME_init_manager = "systemd" -``` - -* Configure for ivi-shell and ivi-extension - -```bash - DISTRO_FEATURES_append = " ivi-shell" -``` - -* Configure for USB 3.0 - -```bash - MACHINE_FEATURES_append = " usb3" -``` - -* Enable tuning support for Capacity Aware migration Strategy (CAS) - -```bash - MACHINE_FEATURES_append = " cas" -``` - -* For a list of sample local.conf file, please refer to: [docs/sample/conf/](docs/sample/conf/) - -* Build the target file system image using bitbake: - -```bash - $ bitbake core-image-minimal -``` - -After completing the images for the target machine will be available in the -output directory 'tmp/deploy/images/<supported board name>'. - -Images generated: - -* Image (generic Linux Kernel binary image file) - -* \<SoC\>-\<machine name\>.dtb (DTB for target machine) - -* core-image-minimal-\<machine name\>.tar.bz2 (rootfs tar+bzip2) - -* core-image-minimal-\<machine name\>.ext4 (rootfs ext4 format) - -## Build Instructions for SDK - - -NOTE: - -**This may be changed in the near feature. These instructions are tentative.** - -Should define the staticdev in SDK image feature for installing the static libs -to SDK in local.conf. - -```bash - SDKIMAGE_FEATURES_append = " staticdev-pkgs" -``` - -### For 64-bit target SDK (aarch64) - - -Use `bitbake -c populate_sdk` for generating the toolchain SDK - -```bash - $ bitbake core-image-minimal -c populate_sdk -``` - -The SDK can be found in the output directory `tmp/deploy/sdk` - -* `poky-glibc-x86_64-core-image-minimal-aarch64-toolchain-x.x.sh` - -### Usage of toolchain SDK - - -Install the SDK to the default: `/opt/poky/x.x` - -* For 64-bit target SDK - -```bash - $ sh poky-glibc-x86_64-core-image-minimal-aarch64-toolchain-x.x.sh -``` - -* For 64-bit application, using environment script in `/opt/poky/x.x` - -```bash - $ source /opt/poky/x.x/environment-setup-aarch64-poky-linux -``` - -## R-Car Generation 3 Information - - -Refer to the following for more information from eLinux website - -https://elinux.org/R-Car diff --git a/docs/2_Hardware_Support/Renesas_Gen3_Boards /2_Proprietary_Drivers.md b/docs/2_Hardware_Support/Renesas_Gen3_Boards /2_Proprietary_Drivers.md deleted file mode 100644 index a56d667..0000000 --- a/docs/2_Hardware_Support/Renesas_Gen3_Boards /2_Proprietary_Drivers.md +++ /dev/null @@ -1,228 +0,0 @@ ---- -edit_link: '' -title: Proprietary Drivers -origin_url: >- - https://git.automotivelinux.org/AGL/meta-renesas-rcar-gen3/plain/meta-rcar-gen3/README.proprietary.md?h=master ---- - -<!-- WARNING: This file is generated by fetch_docs.js using /home/boron/Documents/AGL/docs-webtemplate/site/_data/tocs/hardware/master/renesas-gen3-boards-docs-book.yml --> - -# Proprietary libraries for meta-rcar-gen3 - - -The meta-rcar-gen3 layer of meta-renesas is supported Graphic GLES(GSX) -libraries, proprietary library of multimedia, and ICCOM software. - -This README describes how to use these features and setting to local.conf. - -```bash - I/ Board configuration - II/ Build with GLES - III/ Build with Renesas multimedia libraries - IV/ Enable Linux ICCOM driver and Linux ICCOM library -``` - -There are 2 main paths: - -* Please check section II to config for GLES. -* Please check section III to enable Multimedia functions. - -If you would like to use Linux ICCOM driver and Linux ICCOM library, please -check section IV. - -**NOTE:** - -* However, to have a completed local.conf, please also refer to Build -Instruction in [meta-renesas/meta-rcar-gen3/README.md](README.md). - -* In addition, these libraries are not provided with recipes. If you would like -to use, you will need to get them from Renesas. - -## I/ Board configuration - - -* Add this line to local.conf - - * For Salvator-X board - - ```bash - MACHINE = "salvator-x" - ``` - - * For R-Car Starter Kit Premier(H3ULCB) board - - ```bash - MACHINE = "h3ulcb" - ``` - - * For R-Car Starter Kit Pro(M3ULCB) board - - ```bash - MACHINE = "m3ulcb" - ``` - - * For R-Car Starter Kit Pro(M3NULCB) board - - ```bash - MACHINE = "m3nulcb" - ``` - - * For Ebisu board - - ```bash - MACHINE = "ebisu" - ``` - -* Set SOC family name - - * For H3: r8a7795 - - ```bash - SOC_FAMILY = "r8a7795" - ``` - - * For M3: r8a7796 - - ```bash - SOC_FAMILY = "r8a7796" - ``` - - * For M3N: r8a77965 - - ```bash - SOC_FAMILY = "r8a77965" - ``` - - * For E3: r8a77990 - - ```bash - # Already added in machine config: ebisu.conf - SOC_FAMILY = "r8a77990" - ``` - -## II/ Build with GLES - - -For wayland with GSX - -* Please copy proprietary libraries to the directory of recipes. - -* Set local.conf the following. - -```bash - # Enable Gfx Pkgs - MACHINE_FEATURES_append = " gsx" - MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2" - - # for Wayland/Weston - DISTRO_FEATURES_NATIVESDK_append = " wayland" - DISTRO_FEATURES_append = " pam" - PREFERRED_PROVIDER_virtual/libgles1 = "" - PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" - PREFERRED_PROVIDER_virtual/egl = "libegl" - PREFERRED_PROVIDER_virtual/libgl = "" - PREFERRED_PROVIDER_virtual/mesa = "" - PREFERRED_PROVIDER_libgbm = "libgbm" - PREFERRED_PROVIDER_libgbm-dev = "libgbm" - BBMASK = "mesa-gl" -``` - -* Run `bitbake core-image-weston` - -## III/ Build with Renesas multimedia libraries - - -Multimedia portions depend on GLES portions. - -### A/ Configuration for Multimedia features - - -* Please copy proprietary libraries to the directory of recipes. - -* Please set local.conf the following. - -```bash - # Enable multimedia features. - # This provides package group of plug-ins of the GStreamer, multimedia - # libraries and kernel drivers. - - MACHINE_FEATURES_append = " multimedia" -``` - -### B/ Configuration for optional codecs and middleware - - -* Please copy proprietary libraries to the directory of recipes. - -* Add features to DISTRO_FEATURES_append to local.conf - -```bash - # Additional configuration in OMX module - " h263dec_lib" - for OMX Media Component H263 Decoder Library - " h264dec_lib" - for OMX Media Component H264 Decoder Library - " h264enc_lib" - for OMX Media Component H.264 Encoder Library - " h265dec_lib" - for OMX Media Component H265 Decoder Library - " mpeg2dec_lib" - for OMX Media Component MPEG2 Decoder Library - " mpeg4dec_lib" - for OMX Media Component MPEG4 Decoder Library - " vc1dec_lib" - for OMX Media Component VC-1 Decoder Library - " divxdec_lib" - for OMX Media Component DivX Decoder Library - " rvdec_lib" - for OMX Media Component RealVideo Decoder Library - " alacdec_lib" - for OMX Media Component ALAC Decoder Library - " flacdec_lib" - for OMX Media Component FLAC Decoder Library - " aaclcdec_lib" - for OMX Media Component AAC-LC Decoder Library - " aaclcdec_mdw" - for AAC-LC 2ch Decoder Middleware for Linux - " aacpv2dec_lib" - for OMX Media Component aacPlus V2 Decoder Library - " aacpv2dec_mdw" - for aacPlus V2 Decoder Middleware for Linux - " mp3dec_lib" - for OMX Media Component MP3 Decoder Library - " mp3dec_mdw" - for MP3 Decoder Middleware for Linux - " wmadec_lib" - for OMX Media Component WMA Standard Decoder Library - " wmadec_mdw" - for WMA Standard Decoder Middleware for Linux - " dddec_lib" - for OMX Media Component Dolby(R) Digital Decoder Library - " dddec_mdw" - for Dolby(R) Digital Decoder Middleware for Linux - " aaclcenc_lib" - for OMX Media Component AAC-LC Encoder Library - " vp8dec_lib" - for OMX Media Component VP8 Decoder Library for Linux - " vp8enc_lib" - for OMX Media Component VP8 Encoder Library for Linux - " vp9dec_lib" - for OMX Media Component VP9 Decoder Library for Linux - " aaclcenc_mdw" - for AAC-LC Encoder Middleware for Linux - " cmsbcm" - for CMS Basic Color Management Middleware for Linux - " cmsblc" - for CMS CMM3 Backlight Control Middleware for Linux - " cmsdgc" - for CMS VSP2 Dynamic Gamma Correction Middleware for Linux - " dtv" - for ISDB-T DTV Software Package for Linux - " dvd" - for DVD Core-Middleware for Linux - " adsp" - for ADSP driver, ADSP interface and ADSP framework for Linux - " avb" - for AVB Software Package for Linux -``` - -Ex: -``` - DISTRO_FEATURES_append = " h264dec_lib h265dec_lib mpeg2dec_lib aaclcdec_lib aaclcdec_mdw" -``` - -### C/ Configuration for test packages - - -Must ensure that Multimedia features have been enabled. -(Please refer to III/A to enable Multimedia.) - -* Please add feature to DISTRO_FEATURES_append to local.conf. - -```bash - # Configuration for multimedia test package - - DISTRO_FEATURES_append = " mm-test" -``` - -## IV/ Enable Linux ICCOM driver and Linux ICCOM library - - -For Linux ICCOM driver and Linux ICCOM library - -* Please copy proprietary libraries to the directory of recipes. - -* Please set local.conf the following. - -```bash - DISTRO_FEATURES_append = " iccom" -``` -END. - |