diff options
Diffstat (limited to 'docs/4_APIs_and_Services/4.5_Message_Signaling/7_CanDevStudio_Quickstart/candevstudio/3_Add_CAN_Device.md')
-rw-r--r-- | docs/4_APIs_and_Services/4.5_Message_Signaling/7_CanDevStudio_Quickstart/candevstudio/3_Add_CAN_Device.md | 41 |
1 files changed, 0 insertions, 41 deletions
diff --git a/docs/4_APIs_and_Services/4.5_Message_Signaling/7_CanDevStudio_Quickstart/candevstudio/3_Add_CAN_Device.md b/docs/4_APIs_and_Services/4.5_Message_Signaling/7_CanDevStudio_Quickstart/candevstudio/3_Add_CAN_Device.md deleted file mode 100644 index 9eef2c7..0000000 --- a/docs/4_APIs_and_Services/4.5_Message_Signaling/7_CanDevStudio_Quickstart/candevstudio/3_Add_CAN_Device.md +++ /dev/null @@ -1,41 +0,0 @@ ---- -edit_link: '' -title: Add a CAN device in CANdevStudio -origin_url: >- - https://raw.githubusercontent.com/automotive-grade-linux/docs-sources/master/agl-documentation/candevstudio/docs/3_Add_CAN_Device.md ---- - -<!-- WARNING: This file is generated by fetch_docs.js using /home/boron/Documents/AGL/docs-webtemplate/site/_data/tocs/apis_services/master/candevstudio-developer-guides-api-services-book.yml --> - -# Add a CAN device in CANdevStudio - -Start a new project and grab a ***CanDevice*** from the left pane in the -***Device Layer*** section and drop it on the grid workspace. Right-Click on it -and open its ***Properties***. Here you have to set the ***backend*** and the -***interface*** name you'll want to use. Backend available are: - -- socketcan: CAN stack present by default in the Linux Kernel. This use Linux socket and open source CAN device driver (More information here). -- systeccan: CAN bus backend using the SYS TEC CAN adapters. -- peakcan: CAN bus plugin using the PEAK CAN adapters. -- tinycan: CAN bus plugin using the MHS CAN adapters. -- vectorcan: CAN bus plugin using the Vector CAN adapters. - -More details about CANdevStudio CAN bus support [here](http://doc.qt.io/qt-5.10/qtcanbus-backends.html). - -***Interface*** is the name of the device you want to use. Bring up your CAN device and use the following command to find out which one are available: - -```bash -ip link -1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 - link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 -2: enp0s25: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000 - link/ether 90:b1:1c:6b:b2:21 brd ff:ff:ff:ff:ff:ff -3: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000 - link/ether 52:54:00:56:86:80 brd ff:ff:ff:ff:ff:ff -4: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc fq_codel master virbr0 state DOWN mode DEFAULT group default qlen 1000 - link/ether 52:54:00:56:86:80 brd ff:ff:ff:ff:ff:ff -5: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default - link/ether 02:42:81:38:a8:75 brd ff:ff:ff:ff:ff:ff -12: can0: <NOARP,UP,LOWER_UP> mtu 72 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 - link/can -``` |