diff options
| -rw-r--r-- | dhcpd/dhcpd.conf | 122 | ||||
| -rwxr-xr-x | lavalab-gen.sh | 20 |
2 files changed, 142 insertions, 0 deletions
diff --git a/dhcpd/dhcpd.conf b/dhcpd/dhcpd.conf new file mode 100644 index 0000000..eaae2d3 --- /dev/null +++ b/dhcpd/dhcpd.conf @@ -0,0 +1,122 @@ +# dhcpd.conf +# +# Sample configuration file for ISC dhcpd +# + +# option definitions common to all supported networks... +option domain-name "lavalab.local"; +#option domain-name-servers 192.168.1.1; + +default-lease-time 600; +max-lease-time 7200; + +# The ddns-updates-style parameter controls whether or not the server will +# attempt to do a DNS update when a lease is confirmed. We default to the +# behavior of the version 2 packages ('none', since DHCP v2 didn't +# have support for DDNS.) +ddns-update-style none; + +# If this DHCP server is the official DHCP server for the local +# network, the authoritative directive should be uncommented. +authoritative; + +# Use this to send dhcp log messages to a different log file (you also +# have to hack syslog.conf to complete the redirection). +#log-facility local7; + +# No service will be given on this subnet, but declaring it helps the +# DHCP server to understand the network topology. + +#subnet 10.152.187.0 netmask 255.255.255.0 { +#} + +# This is a very basic subnet declaration. + +#subnet 10.254.239.0 netmask 255.255.255.224 { +# range 10.254.239.10 10.254.239.20; +# option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org; +#} + +# This declaration allows BOOTP clients to get dynamic addresses, +# which we don't really recommend. + +#subnet 10.254.239.32 netmask 255.255.255.224 { +# range dynamic-bootp 10.254.239.40 10.254.239.60; +# option broadcast-address 10.254.239.31; +# option routers rtr-239-32-1.example.org; +#} + +# A slightly different configuration for an internal subnet. +#subnet 10.5.5.0 netmask 255.255.255.224 { +# range 10.5.5.26 10.5.5.30; +# option domain-name-servers ns1.internal.example.org; +# option domain-name "internal.example.org"; +# option routers 10.5.5.1; +# option broadcast-address 10.5.5.31; +# default-lease-time 600; +# max-lease-time 7200; +#} + +# Hosts which require special configuration options can be listed in +# host statements. If no address is specified, the address will be +# allocated dynamically (if possible), but the host-specific information +# will still come from the host declaration. + +#host passacaglia { +# hardware ethernet 0:0:c0:5d:bd:95; +# filename "vmunix.passacaglia"; +# server-name "toccata.example.com"; +#} + +# Fixed IP addresses can also be specified for hosts. These addresses +# should not also be listed as being available for dynamic assignment. +# Hosts for which fixed IP addresses have been specified can boot using +# BOOTP or DHCP. Hosts for which no fixed address is specified can only +# be booted with DHCP, unless there is an address range on the subnet +# to which a BOOTP client is connected which has the dynamic-bootp flag +# set. +#host fantasia { +# hardware ethernet 08:00:07:26:c0:a5; +# fixed-address fantasia.example.com; +#} + +# You can declare a class of clients and then do address allocation +# based on that. The example below shows a case where all clients +# in a certain class get addresses on the 10.17.224/24 subnet, and all +# other clients get addresses on the 10.0.29/24 subnet. + +#class "foo" { +# match if substring (option vendor-class-identifier, 0, 4) = "SUNW"; +#} + +#shared-network 224-29 { +# subnet 10.17.224.0 netmask 255.255.255.0 { +# option routers rtr-224.example.org; +# } +# subnet 10.0.29.0 netmask 255.255.255.0 { +# option routers rtr-29.example.org; +# } +# pool { +# allow members of "foo"; +# range 10.17.224.10 10.17.224.250; +# } +# pool { +# deny members of "foo"; +# range 10.0.29.10 10.0.29.230; +# } +#} + +subnet 192.168.66.0 netmask 255.255.255.0 { + range 192.168.66.3 192.168.66.254; + group { + host baylibre-acme { + hardware ethernet 6c:ec:eb:67:89:ad; + fixed-address 192.168.66.2; + } + host baylibre-acme2 { + hardware ethernet 84:eb:18:94:2e:ca; + fixed-address 192.168.66.2; + } + } +} + diff --git a/lavalab-gen.sh b/lavalab-gen.sh new file mode 100755 index 0000000..06df881 --- /dev/null +++ b/lavalab-gen.sh @@ -0,0 +1,20 @@ +#!/bin/sh + +rm -rv lava-master/devices/ +rm -rv lava-master/slaves/ +rm -rv lava-slave/conmux/ +rm -rv lava-master/tokens/ +rm -rv lava-master/users/ +rm lavalab*rules + +if [ "$1" = "mrproper" ];then + exit 0 +fi + +./lavalab-gen.py || exit 1 + +rm /etc/udev/rules.d/lavalab*rules +cp lavalab*rules /etc/udev/rules.d/ + +docker-compose build || exit 1 +docker-compose up || exit 1 |