diff options
Diffstat (limited to 'README.md')
| -rw-r--r-- | README.md | 27 |
1 files changed, 27 insertions, 0 deletions
@@ -265,6 +265,8 @@ slaves: remote_proto: http(default) or https default_slave: Does this slave is the default slave where to add boards (default: lab-slave-0) bind_dev: Bind /dev from host to slave. This is needed when using some HID PDU + use_nfs: Does the LAVA dispatcher will run NFS jobs + arch: The arch of the worker (if not x86_64), only accept arm64 expose_ser2net: Do ser2net ports need to be available on host expose_ports: Expose port p1 on the host to p2 on the worker slave. - p1:p2 @@ -273,6 +275,12 @@ slaves: env: - line1 A list of line to set as environment (See /etc/lava-server/env.yaml for examples) - line2 + devices: A list of devices which need UDEV rules + - name: The name of the device + vendorid: The VID of the UART (Formated as 0xXXXX) + productid: the PID of the UART (Formated as 0xXXXX) + serial: The serial number of the device if the device got one + devpath: The UDEV devpath to this device if more than one is present boards: - name: devicename Each board must be named by their device-type as "device-type-XX" (where XX is a number) @@ -405,6 +413,12 @@ For building an arm64 lava-docker, some little trick are necesssary: For building lava-xxx-base images - replace "bitnami/minideb" by "arm64v8/debian" on lava-master-base/lava-slave-base dockerfiles. +# How to ran NFS jobs +You need to se use_nfs: True on slave that will ran NFS jobs. +A working NFS server must be working on the host. +Furthermore, you must create a /var/lib/lava/dispatcher/tmp directory on the host and export it like: +/var/lib/lava/dispatcher/tmp 192.168.66.0/24(no_root_squash,rw,no_subtree_check) + ## How to add custom LAVA patchs You can add custom or backported LAVA patchs in lava-master/lava-patch Doing the same for lava-slave will be done later. @@ -422,6 +436,19 @@ slave: env: - "http_proxy: http://dns:port" +## How to use a board which uses PXE ? +All boards which uses PXE, could be used with LAVA via grub. +But you need to add a configuration in your DHCP server for that board. +This configuration need tell to the PXE to get GRUB for the dispatcher TFTP. +EXample for an upsquare and a dispatcher availlable at 192.168.66.1: +``` + host upsquare { + hardware ethernet 00:07:32:54:41:bb; + filename "/boot/grub/x86_64-efi/core.efi"; + next-server 192.168.66.1; + } +``` + ## Bugs, Contact The prefered way to submit bugs are via the github issue tracker You can also contact us on #lava-docker on the freenode IRC network |