diff options
Diffstat (limited to 'README.md')
| -rw-r--r-- | README.md | 127 |
1 files changed, 66 insertions, 61 deletions
@@ -26,17 +26,11 @@ The following packages are necessary on the host machine: Example to use lava-docker with only one QEMU device: * Checkout the lava-docker repository -* You will obtain the following boards.yaml -``` -lab-slave-0: - boardlist: - qemu-01: - type: qemu -``` * Generate configuration files for LAVA, udev, serial ports, etc. from boards.yaml via ``` ./lavalab-gen.py ``` +* Go to output/local directory * Build docker images via ``` docker-compose build @@ -65,9 +59,9 @@ You could check in https://github.com/Linaro/lava-server/tree/release/lava_sched Example: For a beagleboneblack, the device-type is beaglebone-black (Even if official DT name is am335x-boneblack) -So you have now: +So you need to add in the boards section: ``` - beagleboneblack-01: + - name: beagleboneblack-01 type: beaglebone-black ``` @@ -87,7 +81,7 @@ The serial is AK04TU1X ``` So you have now: ``` - beagleboneblack-01: + - name: beagleboneblack-01 type: beaglebone-black uart: idvendor: 0x0403 @@ -105,7 +99,7 @@ udevadm info -a -n /dev/ttyUSB1 |grep devpath | head -n1 ``` So you have now: ``` - beagleboneblack-01: + - name: beagleboneblack-01 type: beaglebone-black uart: idvendor: 0x0403 @@ -130,7 +124,7 @@ If the beagleboneblack is wired to port 3 and the ACME board have IP 192.168.66. #### Example: beagleboneblack, with FTDI (serial 1234567), connected to port 5 of an ACME ``` - beagleboneblack-01: + - name: beagleboneblack-01 type: beaglebone-black pdu_generic: hard_reset_command: /usr/local/bin/acme-cli -s 192.168.66.2 reset 5 @@ -142,14 +136,11 @@ beagleboneblack, with FTDI (serial 1234567), connected to port 5 of an ACME serial: 1234567 ``` -## Known limitations -The current lava-docker provides support for generating only one LAVA slave. - ## Architecture -The setup is composed of a host which runs the following docker images and DUT to be tested.<br/> +The basic setup is composed of a host which runs the following docker images and DUT to be tested.<br/> * lava-master: run lava-server along with the web interface * lava-slave: run lava-dispatcher, the compoment which sends jobs to DUTs -* squid: an HTTP proxy for caching downloaded contents (kernel/dtb/rootfs) +* squid: an HTTP proxy for caching downloaded contents (kernel/dtb/rootfs) (Work in progress) The host and DUTs must share a common LAN.<br/> The host IP on this LAN must be set as dispatcher_ip in boards.yaml.<br/> @@ -159,6 +150,12 @@ So, on the LAN shared with DUTs, a running DHCPD is necessary. (See DHCPD below)  +## Multi-host architectures +Lava-docker support multi-host architecture, Master and slaves could be on different host. + +Lava-docker support multiples slaves, but with a maximum of one slave per host. +This is due to that slave need TFTP port accessible from outside. + ### Power supply You need to have a PDU for powering your DUT. Managing PDUs is done via pdu_generic @@ -214,25 +211,51 @@ You can use the lavalab-gen.sh helper script which will do all the above actions ### boards.yaml This file describe how the DUTs are connected and powered. ``` -lab-slave-XX: The name of the slave (where XX is a number) - dispatcher_ip: the IP where the slave could be contacted. In lava-docker it is the host IP since docker proxify TFTP from host to the slave. - host_has_cpuflag_kvm: Does the host running lab-slave-XX have KVM - boardlist: - devicename: Each board must be named by their device-type as "device-type-XX" (where XX is a number) - type: the LAVA device-type of this device - uboot_ipaddr: (optional) a static IP to set in uboot - uboot_macaddr: (Optional) the MAC address to set in uboot +masters: + - name: lava-master name of the master + host: name name of the host running lava-master (default to "local") + webadmin_https: Does the LAVA webadmin is accessed via https + users: + - name: LAVA username + token: The token of this user + password: Password the this user (generated if not provided) + superuser: yes/no (default no) + staff: yes/no (default no) + tokens: + - username: The LAVA user owning the token below. (This user should be created via users:) + token: The token for this callback + description: The description of this token. This string could be used with LAVA-CI. +slaves: + - name: lab-slave-XX The name of the slave (where XX is a number) + host: name name of the host running lava-slave-XX (default to "local") + dispatcher_ip: the IP where the slave could be contacted. In lava-docker it is the host IP since docker proxify TFTP from host to the slave. + remote_master: the name of the master to connect to + remote_address: the FQDN or IP address of the master (if different from remote_master) + remote_rpc_port: the port used by the LAVA RPC2 (default 80) + remote_user: the user used for connecting to the master + remote_proto: http(default) or https + extra_actions: An optional list of action to do at end of the docker build + - "apt-get install package" + +boards: + - name: devicename Each board must be named by their device-type as "device-type-XX" (where XX is a number) + type: the LAVA device-type of this device + kvm: (For qemu only) Does the qemu could use KVM (default: no) + uboot_ipaddr: (optional) a static IP to set in uboot + uboot_macaddr: (Optional) the MAC address to set in uboot + custom_option: (optional) All following strings will be directly append to devicefile + - "set x=1" # One of uart or connection_command must be choosen - uart: - idvendor: The VID of the UART (Formated as 0xXXXX) - idproduct: the PID of the UART (Formated as 0xXXXX) - serial: The serial number in case of FTDI uart - devpath: the UDEV devpath to this uart for UART without serial number - connection_command: A command to be ran for getting a serial console - pdu_generic: - hard_reset_command: commandline to reset the board - power_off_command: commandline to power off the board - power_on_command: commandline to power on the board + uart: + idvendor: The VID of the UART (Formated as 0xXXXX) + idproduct: the PID of the UART (Formated as 0xXXXX) + serial: The serial number in case of FTDI uart + devpath: the UDEV devpath to this uart for UART without serial number + connection_command: A command to be ran for getting a serial console + pdu_generic: + hard_reset_command: commandline to reset the board + power_off_command: commandline to power off the board + power_on_command: commandline to power on the board ``` Notes on UART: * Only one of devpath/serial is necessary. @@ -251,23 +274,6 @@ Note on connection_command: connection_command is for people which want to use o Examples: see [boards.yaml.example](boards.yaml.example) -### tokens.yaml -The tokens format has two sections, one for LAVA users, the other for callback tokens -``` -lava_server_users: - - name: LAVA username - token: The token of this user - password: Password the this user (generated if not provided) - superuser: yes/no (default no) - staff: yes/no (default no) -callback_tokens: - - filename: The filename for storing the informations below, the name should be unique along other callback tokens - username: The LAVA user owning the token below. (This user should be created via lava_server_users:) - token: The token for this callback - description: The description of this token. This string could be used with LAVA-CI. -``` -Example: see [tokens.yaml](tokens.yaml) - ### Generate ``` lavalab-gen.py @@ -275,13 +281,12 @@ lavalab-gen.py this script will generate all necessary files in the following locations: ``` -conmux/ All files needed by conmux -tokens/ This is where the callback tokens will be generated -users/ This is where the users will be generated -devices/ All LAVA devices files -slaves/ Contain the dispatcher_ip to give to slave node -udev-rules for host -docker-compose.yml Generated from docker-compose.template +output/host/lava-master/tokens/ This is where the callback tokens will be generated +output/host/lava-master/users/ This is where the users will be generated +output/host/lab-slave-XX/conmux/ All files needed by conmux +output/host/lab-slave-XX/devices/ All LAVA devices files +output/host/udev/99-lavaworker-udev.rules udev rules for host +output/host/docker-compose.yml Generated from docker-compose.template ``` All thoses file (except for udev-rules) will be handled by docker. @@ -306,10 +311,10 @@ For running all images, simply run: docker-compose up -d ``` -## Proxy cache +## Proxy cache (Work in progress) A squid docker is provided for caching all LAVA downloads (image, dtb, rootfs, etc...)<br/> You have to uncomment a line in lava-master/Dockerfile to enable it.<br/> -Note that the squid proxy is always built and run. +For the moment, it is unsupported and unbuilded. ## Security Note that this container provides defaults which are unsecure. If you plan on deploying this in a production enviroment please consider the following items: |