Add gateway demo

Changes:
- Add recipe for AGL VSS to MQTT proxy daemon
- Update agl-vcar.dbc CAN database definition to add signals useful
  for demoing the proxy (per V2C EG discussion).
- Add a patch to kuksa-dbc-feeder to allow sensor signal updates to
  generate CAN messages in output mode.
- Add VSS vspec variants to define the desired CAN input and output
  support for the various kuksa-dbc-feeder instances in the default
  and full gateway demos.
- Add configurations for kuksa-dbc-feeder for the running the default
  gateway demo with CAN output from a demo control panel instance on
  a single CAN interface, as well as a fuller setup with a second
  kuksa-dbc-feeder running against a second CAN interface on the
  gateway to handle the demo steering wheel and HVAC support.
- Add gateway demo specific configuration files for various KUKSA.val
  databroker clients to override the databroker location.
- Add agl-gateway-demo and agl-gateway-demo-preconfigured images for
  the default and full demos.
- Add *-preconfigured-gateway image flavors for the Flutter IVI, IC,
  and KVM demo images that support running with the databroker on
  the gateway.

NOTES:
- The *-preconfigured-gateway images assume the gateway has an IP
  address of 192.168.10.4.
- Required changes to the agl-demo-control-panel application and the
  addition of a agl-ivi-demo-control-panel-preconfigured-gateway
  image will come in a subsequent change.

Bug-AGL: SPEC-5107, SPEC-5138

Change-Id: I9797aa72737af7af3d791a5151198f80b6d90e0d
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29921
ci-image-boot-test: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
Tested-by: Jenkins Job builder account

3 files changed, 45 insertions, 0 deletions

diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware/config.ini.gw-hardware b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware/config.ini.gw-hardware
new file mode 100644
index 000000000..ee3541a5f
--- /dev/null
+++ b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware/config.ini.gw-hardware
@@ -0,0 +1,30 @@
+[general]
+# server type:
+# switch between kuksa_databroker and kuksa_val_server
+server_type = kuksa_databroker
+# VSS mapping file
+mapping = /usr/share/vss/vss_rel_4.0-agl-gw-hardware.json
+
+# IP address for server (KUKSA.val Server or Databroker)
+ip = localhost
+
+# Port for server (KUKSA.val Server or Databroker)
+port = 55555
+
+# Shall TLS be used (default False for Databroker, True for KUKSA.val Server)
+tls = True
+
+# TLS-related settings
+# Path to root CA, needed if using TLS
+root_ca_path=/etc/kuksa-val/CA.pem
+
+# Token file for authorization.
+token = /etc/kuksa-dbc-feeder/dbc_feeder.token
+
+[can]
+# CAN port
+port = can1
+# Enable SAE-J1939 Mode. False: ignore
+j1939 = False
+# DBC file used to parse CAN messages
+dbcfile = /etc/kuksa-dbc-feeder/agl-vcar.dbc
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware/kuksa-dbc-feeder-can1.service b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware/kuksa-dbc-feeder-can1.service
new file mode 100644
index 000000000..6f123dd57
--- /dev/null
+++ b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware/kuksa-dbc-feeder-can1.service
@@ -0,0 +1,12 @@
+[Unit]
+Description=Eclipse KUKSA.val DBC feeder (can1)
+Requires=kuksa-databroker.service can-dev-helper.service
+After=kuksa-databroker.service can-dev-helper.service
+
+[Service]
+EnvironmentFile=-/etc/default/kuksa-dbc-feeder.gw-hardware
+ExecStart=/usr/bin/dbcfeeder.py $EXTRA_ARGS
+Restart=on-failure
+
+[Install]
+WantedBy=multi-user.target
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware/kuksa-dbc-feeder.gw-hardware b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware/kuksa-dbc-feeder.gw-hardware
new file mode 100644
index 000000000..562a56b8b
--- /dev/null
+++ b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware/kuksa-dbc-feeder.gw-hardware
@@ -0,0 +1,3 @@
+# DBC input for steering wheel, output for HVAC
+EXTRA_ARGS="--val2dbc --dbc2val --dbc-default /etc/kuksa-dbc-feeder/dbc_default_values.json --config /etc/kuksa-dbc-feeder/config.ini.gw-hardware"
+#LOG_LEVEL=debug