Add gateway demo

Changes:
- Add recipe for AGL VSS to MQTT proxy daemon
- Update agl-vcar.dbc CAN database definition to add signals useful
  for demoing the proxy (per V2C EG discussion).
- Add a patch to kuksa-dbc-feeder to allow sensor signal updates to
  generate CAN messages in output mode.
- Add VSS vspec variants to define the desired CAN input and output
  support for the various kuksa-dbc-feeder instances in the default
  and full gateway demos.
- Add configurations for kuksa-dbc-feeder for the running the default
  gateway demo with CAN output from a demo control panel instance on
  a single CAN interface, as well as a fuller setup with a second
  kuksa-dbc-feeder running against a second CAN interface on the
  gateway to handle the demo steering wheel and HVAC support.
- Add gateway demo specific configuration files for various KUKSA.val
  databroker clients to override the databroker location.
- Add agl-gateway-demo and agl-gateway-demo-preconfigured images for
  the default and full demos.
- Add *-preconfigured-gateway image flavors for the Flutter IVI, IC,
  and KVM demo images that support running with the databroker on
  the gateway.

NOTES:
- The *-preconfigured-gateway images assume the gateway has an IP
  address of 192.168.10.4.
- Required changes to the agl-demo-control-panel application and the
  addition of a agl-ivi-demo-control-panel-preconfigured-gateway
  image will come in a subsequent change.

Bug-AGL: SPEC-5107, SPEC-5138

Change-Id: I9797aa72737af7af3d791a5151198f80b6d90e0d
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29921
ci-image-boot-test: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
Tested-by: Jenkins Job builder account

5 files changed, 1454 insertions, 30 deletions

diff --git a/recipes-connectivity/vss/vss-agl/agl_vss_overlay.vspec b/recipes-connectivity/vss/vss-agl/agl_vss_overlay.vspec
index 6c0a08ae2..b8a01e362 100644
--- a/recipes-connectivity/vss/vss-agl/agl_vss_overlay.vspec
+++ b/recipes-connectivity/vss/vss-agl/agl_vss_overlay.vspec
@@ -1,23 +1,184 @@
-# Define DBC mappings for vehicle and engine speeds
+# DBC mappings for vehicle and engine speeds
 
 Vehicle.Speed:
   datatype: float
   type: sensor
-  dbc:
+  dbc2vss:
     signal: PT_VehicleAvgSpeed
     interval_ms: 100
+  vss2dbc:
+    signal: PT_VehicleAvgSpeed
 
 Vehicle.Powertrain.CombustionEngine.Speed:
   datatype: float
   type: sensor
-  dbc:
+  dbc2vss:
     signal: PT_EngineSpeed
     interval_ms: 100
     transform:
       math: "floor(x+0.5)"
+  vss2dbc:
+    signal: PT_EngineSpeed
+
+# DBC mappings for other signals for V2C demo
+
+Vehicle.Body.Lights.Hazard.IsSignaling:
+  datatype: boolean
+  type: actuator
+  dbc2vss:
+    signal: PT_HazardOn
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Body.Lights.DirectionIndicator.Left.IsSignaling:
+  datatype: boolean
+  type: actuator
+  dbc2vss:
+    signal: PT_LeftTurnOn
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Body.Lights.DirectionIndicator.Right.IsSignaling:
+  datatype: boolean
+  type: actuator
+  dbc2vss:
+    signal: PT_RightTurnOn
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.OBD.ThrottlePosition:
+  datatype: float
+  type: sensor
+  dbc2vss:
+    signal: ThrottlePosition
+    interval_ms: 100
+  vss2dbc:
+    signal: ThrottlePosition
+
+Vehicle.Chassis.SteeringWheel.Angle:
+  datatype: int16
+  type: sensor
+  dbc2vss:
+    signal: SteeringPosition
+    interval_ms: 100
+  vss2dbc:
+    signal: SteeringPosition
+
+Vehicle.Chassis.Brake.PedalPosition:
+  datatype: uint8
+  type: sensor
+  dbc2vss:
+    signal: BrakePressure
+    interval_ms: 100
+    transform:
+      math: "floor(x / 19125 * 100 + 0.5)"
+  vss2dbc:
+    signal: BrakePressure
+    transform:
+      math: "x * 191.25"
+
+Vehicle.Powertrain.Transmission.SelectedGear:
+  datatype: int8
+  type: sensor
+  dbc2vss:
+    signal: Gear
+    interval_ms: 100
+  vss2dbc:
+    signal: Gear
+
+Vehicle.Acceleration.Lateral:
+  datatype: float
+  type: sensor
+  dbc2vss:
+    signal: AccelerationX
+    interval_ms: 100
+  vss2dbc:
+    signal: AccelerationX
+
+Vehicle.Acceleration.Longitudinal:
+  datatype: float
+  type: sensor
+  dbc2vss:
+    signal: AccelerationY
+    interval_ms: 100
+  vss2dbc:
+    signal: AccelerationY
+
+Vehicle.Acceleration.Vertical:
+  datatype: float
+  type: sensor
+  dbc2vss:
+    signal: AccelerationZ
+    interval_ms: 100
+  vss2dbc:
+    signal: AccelerationZ
+
+Vehicle.AngularVelocity.Pitch:
+  datatype: float
+  type: sensor
+  dbc2vss:
+    signal: GyroscopeX
+    interval_ms: 100
+  vss2dbc:
+    signal: GyroscopeX
+
+Vehicle.AngularVelocity.Roll:
+  datatype: float
+  type: sensor
+  dbc2vss:
+    signal: GyroscopeY
+    interval_ms: 100
+  vss2dbc:
+    signal: GyroscopeY
+
+Vehicle.AngularVelocity.Yaw:
+  datatype: float
+  type: sensor
+  dbc2vss:
+    signal: GyroscopeZ
+    interval_ms: 100
+  vss2dbc:
+    signal: GyroscopeZ
+
+Vehicle.CurrentLocation.Latitude:
+  datatype: double
+  type: sensor
+  dbc2vss:
+    signal: Latitude
+    interval_ms: 100
+  vss2dbc:
+    signal: Latitude
+
+Vehicle.CurrentLocation.Longitude:
+  datatype: double
+  type: sensor
+  dbc2vss:
+    signal: Longitude
+    interval_ms: 100
+  vss2dbc:
+    signal: Longitude
+
 
+#
+# AGL VSS additions
+#
 
-# Define extra navigation state signals
+# Extra navigation state signals
 
 Vehicle.Cabin.Infotainment.Navigation.State:
   datatype: string
@@ -32,7 +193,7 @@ Vehicle.Cabin.Infotainment.Navigation.ElapsedDistance:
   description: Navigation elapsed distance.
 
 
-# Define audio control signals
+# Extra audio control signals
 
 Vehicle.Cabin.Infotainment.Media.Audio:
   type: branch
@@ -71,7 +232,7 @@ Vehicle.Cabin.Infotainment.Media.Audio.Treble:
   description: Audio high-frequency filter control.
 
 
-# Define extra steering wheel switch signals, including DBC mappings
+# Extra steering wheel switch signals, including DBC mappings
 
 Vehicle.Cabin.SteeringWheel:
   type: branch
@@ -85,7 +246,7 @@ Vehicle.Cabin.SteeringWheel.Switches.VolumeUp:
   datatype: boolean
   type: sensor
   description: Steering wheel volume up switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_VolumeUp
     on_change: true
     transform:
@@ -99,7 +260,7 @@ Vehicle.Cabin.SteeringWheel.Switches.VolumeDown:
   datatype: boolean
   type: sensor
   description: Steering wheel volume down switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_VolumeDown
     on_change: true
     transform:
@@ -113,7 +274,7 @@ Vehicle.Cabin.SteeringWheel.Switches.VolumeMute:
   datatype: boolean
   type: sensor
   description: Steering wheel volume mute switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_VolumeMute
     on_change: true
     transform:
@@ -127,7 +288,7 @@ Vehicle.Cabin.SteeringWheel.Switches.Next:
   datatype: boolean
   type: sensor
   description: Steering wheel next switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_Next
     on_change: true
     transform:
@@ -141,7 +302,7 @@ Vehicle.Cabin.SteeringWheel.Switches.Previous:
   datatype: boolean
   type: sensor
   description: Steering wheel previous switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_Previous
     on_change: true
     transform:
@@ -155,7 +316,7 @@ Vehicle.Cabin.SteeringWheel.Switches.Mode:
   datatype: boolean
   type: sensor
   description: Steering wheel mode switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_Mode
     on_change: true
     transform:
@@ -169,7 +330,7 @@ Vehicle.Cabin.SteeringWheel.Switches.Info:
   datatype: boolean
   type: sensor
   description: Steering wheel info switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_Info
     on_change: true
     transform:
@@ -183,7 +344,7 @@ Vehicle.Cabin.SteeringWheel.Switches.CruiseEnable:
   datatype: boolean
   type: sensor
   description: Steering wheel cruise enable switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_CruiseEnable
     on_change: true
     transform:
@@ -197,7 +358,7 @@ Vehicle.Cabin.SteeringWheel.Switches.CruiseSet:
   datatype: boolean
   type: sensor
   description: Steering wheel cruise set switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_CruiseSet
     on_change: true
     transform:
@@ -211,7 +372,7 @@ Vehicle.Cabin.SteeringWheel.Switches.CruiseResume:
   datatype: boolean
   type: sensor
   description: Steering wheel cruise resume switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_CruiseResume
     on_change: true
     transform:
@@ -225,7 +386,7 @@ Vehicle.Cabin.SteeringWheel.Switches.CruiseCancel:
   datatype: boolean
   type: sensor
   description: Steering wheel cruise cancel switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_CruiseCancel
     on_change: true
     transform:
@@ -239,7 +400,7 @@ Vehicle.Cabin.SteeringWheel.Switches.CruiseLimit:
   datatype: boolean
   type: sensor
   description: Steering wheel cruise limit switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_CruiseLimit
     on_change: true
     transform:
@@ -253,7 +414,7 @@ Vehicle.Cabin.SteeringWheel.Switches.CruiseDistance:
   datatype: boolean
   type: sensor
   description: Steering wheel cruise distance switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_CruiseDistance
     on_change: true
     transform:
@@ -267,7 +428,7 @@ Vehicle.Cabin.SteeringWheel.Switches.Voice:
   datatype: boolean
   type: sensor
   description: Steering wheel voice switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_Voice
     on_change: true
     transform:
@@ -281,7 +442,7 @@ Vehicle.Cabin.SteeringWheel.Switches.PhoneCall:
   datatype: boolean
   type: sensor
   description: Steering wheel phone call switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_PhoneCall
     on_change: true
     transform:
@@ -295,7 +456,7 @@ Vehicle.Cabin.SteeringWheel.Switches.PhoneHangup:
   datatype: boolean
   type: sensor
   description: Steering wheel phone hangup switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_PhoneHangup
     on_change: true
     transform:
@@ -309,7 +470,7 @@ Vehicle.Cabin.SteeringWheel.Switches.Horn:
   datatype: boolean
   type: sensor
   description: Steering wheel horn switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_Horn
     on_change: true
     transform:
@@ -323,7 +484,7 @@ Vehicle.Cabin.SteeringWheel.Switches.LaneDepartureWarning:
   datatype: boolean
   type: sensor
   description: Steering wheel lane departure warning switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_LaneDepartureWarning
     on_change: true
     transform:
diff --git a/recipes-connectivity/vss/vss-agl/agl_vss_overlay.vspec.control-panel b/recipes-connectivity/vss/vss-agl/agl_vss_overlay.vspec.control-panel
new file mode 100644
index 000000000..b5e2b8a3d
--- /dev/null
+++ b/recipes-connectivity/vss/vss-agl/agl_vss_overlay.vspec.control-panel
@@ -0,0 +1,446 @@
+# DBC mappings for vehicle and engine speeds
+
+Vehicle.Speed:
+  datatype: float
+  type: sensor
+  vss2dbc:
+    signal: PT_VehicleAvgSpeed
+
+Vehicle.Powertrain.CombustionEngine.Speed:
+  datatype: float
+  type: sensor
+  vss2dbc:
+    signal: PT_EngineSpeed
+
+# DBC mappings for other signals for V2C demo
+
+Vehicle.Body.Lights.Hazard.IsSignaling:
+  datatype: boolean
+  type: actuator
+  vss2dbc:
+    signal: PT_HazardOn
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Body.Lights.DirectionIndicator.Left.IsSignaling:
+  datatype: boolean
+  type: actuator
+  vss2dbc:
+    signal: PT_LeftTurnOn
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Body.Lights.DirectionIndicator.Right.IsSignaling:
+  datatype: boolean
+  type: actuator
+  vss2dbc:
+    signal: PT_RightTurnOn
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.OBD.ThrottlePosition:
+  datatype: float
+  type: sensor
+  vss2dbc:
+    signal: ThrottlePosition
+
+Vehicle.Chassis.SteeringWheel.Angle:
+  datatype: int16
+  type: sensor
+  vss2dbc:
+    signal: SteeringPosition
+
+Vehicle.Chassis.Brake.PedalPosition:
+  datatype: uint8
+  type: sensor
+  vss2dbc:
+    signal: BrakePressure
+    transform:
+      math: "x * 191.25"
+
+Vehicle.Powertrain.Transmission.SelectedGear:
+  datatype: int8
+  type: sensor
+  vss2dbc:
+    signal: Gear
+
+Vehicle.Acceleration.Lateral:
+  datatype: float
+  type: sensor
+  vss2dbc:
+    signal: AccelerationX
+
+Vehicle.Acceleration.Longitudinal:
+  datatype: float
+  type: sensor
+  vss2dbc:
+    signal: AccelerationY
+
+Vehicle.Acceleration.Vertical:
+  datatype: float
+  type: sensor
+  vss2dbc:
+    signal: AccelerationZ
+
+Vehicle.AngularVelocity.Pitch:
+  datatype: float
+  type: sensor
+  vss2dbc:
+    signal: GyroscopeX
+
+Vehicle.AngularVelocity.Roll:
+  datatype: float
+  type: sensor
+  vss2dbc:
+    signal: GyroscopeY
+
+Vehicle.AngularVelocity.Yaw:
+  datatype: float
+  type: sensor
+  vss2dbc:
+    signal: GyroscopeZ
+
+Vehicle.CurrentLocation.Latitude:
+  datatype: double
+  type: sensor
+  vss2dbc:
+    signal: Latitude
+
+Vehicle.CurrentLocation.Longitude:
+  datatype: double
+  type: sensor
+  vss2dbc:
+    signal: Longitude
+
+
+#
+# AGL VSS additions
+#
+
+# Extra navigation state signals
+
+Vehicle.Cabin.Infotainment.Navigation.State:
+  datatype: string
+  type: sensor
+  allowed: [ 'UNKNOWN', 'ACTIVE', 'ARRIVED', 'STOPPED' ]
+  description: Navigation state.
+
+Vehicle.Cabin.Infotainment.Navigation.ElapsedDistance:
+  datatype: float
+  type: sensor
+  unit: km
+  description: Navigation elapsed distance.
+
+
+# Extra audio control signals
+
+Vehicle.Cabin.Infotainment.Media.Audio:
+  type: branch
+  description: Media audio controls.
+
+Vehicle.Cabin.Infotainment.Media.Audio.Balance:
+  datatype: int8
+  type: actuator
+  min: -100
+  max: 100
+  unit: percent
+  description: Audio left/right balance.
+
+Vehicle.Cabin.Infotainment.Media.Audio.Fade:
+  datatype: int8
+  type: actuator
+  min: -100
+  max: 100
+  unit: percent
+  description: Audio front/rear balance.
+
+Vehicle.Cabin.Infotainment.Media.Audio.Bass:
+  datatype: int8
+  type: actuator
+  min: -100
+  max: 100
+  unit: percent
+  description: Audio low-frequency filter control.
+
+Vehicle.Cabin.Infotainment.Media.Audio.Treble:
+  datatype: int8
+  type: actuator
+  min: -100
+  max: 100
+  unit: percent
+  description: Audio high-frequency filter control.
+
+
+# Extra steering wheel switch signals, including DBC mappings
+
+Vehicle.Cabin.SteeringWheel:
+  type: branch
+  description: AGL steering wheel demo data.
+
+Vehicle.Cabin.SteeringWheel.Switches:
+  type: branch
+  description: AGL steering wheel demo switch data.
+
+Vehicle.Cabin.SteeringWheel.Switches.VolumeUp:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel volume up switch engaged.
+  dbc2vss:
+    signal: SW_VolumeUp
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.VolumeDown:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel volume down switch engaged.
+  dbc2vss:
+    signal: SW_VolumeDown
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.VolumeMute:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel volume mute switch engaged.
+  dbc2vss:
+    signal: SW_VolumeMute
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.Next:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel next switch engaged.
+  dbc2vss:
+    signal: SW_Next
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.Previous:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel previous switch engaged.
+  dbc2vss:
+    signal: SW_Previous
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.Mode:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel mode switch engaged.
+  dbc2vss:
+    signal: SW_Mode
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.Info:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel info switch engaged.
+  dbc2vss:
+    signal: SW_Info
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseEnable:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise enable switch engaged.
+  dbc2vss:
+    signal: SW_CruiseEnable
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseSet:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise set switch engaged.
+  dbc2vss:
+    signal: SW_CruiseSet
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseResume:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise resume switch engaged.
+  dbc2vss:
+    signal: SW_CruiseResume
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseCancel:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise cancel switch engaged.
+  dbc2vss:
+    signal: SW_CruiseCancel
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseLimit:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise limit switch engaged.
+  dbc2vss:
+    signal: SW_CruiseLimit
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseDistance:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise distance switch engaged.
+  dbc2vss:
+    signal: SW_CruiseDistance
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.Voice:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel voice switch engaged.
+  dbc2vss:
+    signal: SW_Voice
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.PhoneCall:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel phone call switch engaged.
+  dbc2vss:
+    signal: SW_PhoneCall
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.PhoneHangup:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel phone hangup switch engaged.
+  dbc2vss:
+    signal: SW_PhoneHangup
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.Horn:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel horn switch engaged.
+  dbc2vss:
+    signal: SW_Horn
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.LaneDepartureWarning:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel lane departure warning switch engaged.
+  dbc2vss:
+    signal: SW_LaneDepartureWarning
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
diff --git a/recipes-connectivity/vss/vss-agl/agl_vss_overlay.vspec.gw-control-panel b/recipes-connectivity/vss/vss-agl/agl_vss_overlay.vspec.gw-control-panel
new file mode 100644
index 000000000..6b0a9a38a
--- /dev/null
+++ b/recipes-connectivity/vss/vss-agl/agl_vss_overlay.vspec.gw-control-panel
@@ -0,0 +1,447 @@
+# DBC mappings for vehicle and engine speeds
+
+Vehicle.Speed:
+  datatype: float
+  type: sensor
+  dbc2vss:
+    signal: PT_VehicleAvgSpeed
+    interval_ms: 100
+
+Vehicle.Powertrain.CombustionEngine.Speed:
+  datatype: float
+  type: sensor
+  dbc2vss:
+    signal: PT_EngineSpeed
+    interval_ms: 100
+    transform:
+      math: "floor(x+0.5)"
+
+# DBC mappings for other signals for V2C demo
+
+Vehicle.Body.Lights.Hazard.IsSignaling:
+  datatype: boolean
+  type: actuator
+  dbc2vss:
+    signal: PT_HazardOn
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Body.Lights.DirectionIndicator.Left.IsSignaling:
+  datatype: boolean
+  type: actuator
+  dbc2vss:
+    signal: PT_LeftTurnOn
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Body.Lights.DirectionIndicator.Right.IsSignaling:
+  datatype: boolean
+  type: actuator
+  dbc2vss:
+    signal: PT_RightTurnOn
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.OBD.ThrottlePosition:
+  datatype: float
+  type: sensor
+  dbc2vss:
+    signal: ThrottlePosition
+    interval_ms: 100
+
+Vehicle.Chassis.SteeringWheel.Angle:
+  datatype: int16
+  type: sensor
+  dbc2vss:
+    signal: SteeringPosition
+    interval_ms: 100
+
+Vehicle.Chassis.Brake.PedalPosition:
+  datatype: uint8
+  type: sensor
+  dbc2vss:
+    signal: BrakePressure
+    interval_ms: 100
+    transform:
+      math: "floor(x / 19125 * 100 + 0.5)"
+
+Vehicle.Powertrain.Transmission.SelectedGear:
+  datatype: int8
+  type: sensor
+  dbc2vss:
+    signal: Gear
+    interval_ms: 100
+
+Vehicle.Acceleration.Lateral:
+  datatype: float
+  type: sensor
+  dbc2vss:
+    signal: AccelerationX
+    interval_ms: 100
+
+Vehicle.Acceleration.Longitudinal:
+  datatype: float
+  type: sensor
+  dbc2vss:
+    signal: AccelerationY
+    interval_ms: 100
+
+Vehicle.Acceleration.Vertical:
+  datatype: float
+  type: sensor
+  dbc2vss:
+    signal: AccelerationZ
+    interval_ms: 100
+
+Vehicle.AngularVelocity.Pitch:
+  datatype: float
+  type: sensor
+  dbc2vss:
+    signal: GyroscopeX
+    interval_ms: 100
+
+Vehicle.AngularVelocity.Roll:
+  datatype: float
+  type: sensor
+  dbc2vss:
+    signal: GyroscopeY
+    interval_ms: 100
+
+Vehicle.AngularVelocity.Yaw:
+  datatype: float
+  type: sensor
+  dbc2vss:
+    signal: GyroscopeZ
+    interval_ms: 100
+
+Vehicle.CurrentLocation.Latitude:
+  datatype: double
+  type: sensor
+  dbc2vss:
+    signal: Latitude
+    interval_ms: 100
+
+Vehicle.CurrentLocation.Longitude:
+  datatype: double
+  type: sensor
+  dbc2vss:
+    signal: Longitude
+    interval_ms: 100
+
+
+#
+# AGL VSS additions
+#
+
+# Extra navigation state signals
+
+Vehicle.Cabin.Infotainment.Navigation.State:
+  datatype: string
+  type: sensor
+  allowed: [ 'UNKNOWN', 'ACTIVE', 'ARRIVED', 'STOPPED' ]
+  description: Navigation state.
+
+Vehicle.Cabin.Infotainment.Navigation.ElapsedDistance:
+  datatype: float
+  type: sensor
+  unit: km
+  description: Navigation elapsed distance.
+
+
+# Extra audio control signals
+
+Vehicle.Cabin.Infotainment.Media.Audio:
+  type: branch
+  description: Media audio controls.
+
+Vehicle.Cabin.Infotainment.Media.Audio.Balance:
+  datatype: int8
+  type: actuator
+  min: -100
+  max: 100
+  unit: percent
+  description: Audio left/right balance.
+
+Vehicle.Cabin.Infotainment.Media.Audio.Fade:
+  datatype: int8
+  type: actuator
+  min: -100
+  max: 100
+  unit: percent
+  description: Audio front/rear balance.
+
+Vehicle.Cabin.Infotainment.Media.Audio.Bass:
+  datatype: int8
+  type: actuator
+  min: -100
+  max: 100
+  unit: percent
+  description: Audio low-frequency filter control.
+
+Vehicle.Cabin.Infotainment.Media.Audio.Treble:
+  datatype: int8
+  type: actuator
+  min: -100
+  max: 100
+  unit: percent
+  description: Audio high-frequency filter control.
+
+
+# Extra steering wheel switch signals, including DBC mappings
+
+Vehicle.Cabin.SteeringWheel:
+  type: branch
+  description: AGL steering wheel demo data.
+
+Vehicle.Cabin.SteeringWheel.Switches:
+  type: branch
+  description: AGL steering wheel demo switch data.
+
+Vehicle.Cabin.SteeringWheel.Switches.VolumeUp:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel volume up switch engaged.
+  vss2dbc:
+    signal: SW_VolumeUp
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.VolumeDown:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel volume down switch engaged.
+  vss2dbc:
+    signal: SW_VolumeDown
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.VolumeMute:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel volume mute switch engaged.
+  vss2dbc:
+    signal: SW_VolumeMute
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.Next:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel next switch engaged.
+  vss2dbc:
+    signal: SW_Next
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.Previous:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel previous switch engaged.
+  vss2dbc:
+    signal: SW_Previous
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.Mode:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel mode switch engaged.
+  vss2dbc:
+    signal: SW_Mode
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.Info:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel info switch engaged.
+  vss2dbc:
+    signal: SW_Info
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseEnable:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise enable switch engaged.
+  vss2dbc:
+    signal: SW_CruiseEnable
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseSet:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise set switch engaged.
+  vss2dbc:
+    signal: SW_CruiseSet
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseResume:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise resume switch engaged.
+  vss2dbc:
+    signal: SW_CruiseResume
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseCancel:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise cancel switch engaged.
+  vss2dbc:
+    signal: SW_CruiseCancel
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseLimit:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise limit switch engaged.
+  vss2dbc:
+    signal: SW_CruiseLimit
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseDistance:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise distance switch engaged.
+  vss2dbc:
+    signal: SW_CruiseDistance
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.Voice:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel voice switch engaged.
+  vss2dbc:
+    signal: SW_Voice
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.PhoneCall:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel phone call switch engaged.
+  vss2dbc:
+    signal: SW_PhoneCall
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.PhoneHangup:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel phone hangup switch engaged.
+  vss2dbc:
+    signal: SW_PhoneHangup
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.Horn:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel horn switch engaged.
+  vss2dbc:
+    signal: SW_Horn
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.LaneDepartureWarning:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel lane departure warning switch engaged.
+  vss2dbc:
+    signal: SW_LaneDepartureWarning
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
diff --git a/recipes-connectivity/vss/vss-agl/agl_vss_overlay.vspec.gw-hardware b/recipes-connectivity/vss/vss-agl/agl_vss_overlay.vspec.gw-hardware
new file mode 100644
index 000000000..869b33d3d
--- /dev/null
+++ b/recipes-connectivity/vss/vss-agl/agl_vss_overlay.vspec.gw-hardware
@@ -0,0 +1,341 @@
+# DBC mappings for other signals for V2C demo
+
+# DBC mappings for demo HVAC
+
+Vehicle.Cabin.HVAC.Station.Row1.Driver.Temperature:
+  datatype: int8
+  type: actuator
+  vss2dbc:
+    signal: PT_TempLeft
+
+Vehicle.Cabin.HVAC.Station.Row1.Passenger.Temperature:
+  datatype: int8
+  type: actuator
+  vss2dbc:
+    signal: PT_TempRight
+
+Vehicle.Cabin.HVAC.Station.Row1.Driver.FanSpeed:
+  datatype: uint8
+  type: actuator
+  vss2dbc:
+    signal: PT_FanSpeed
+
+#
+# AGL VSS additions
+#
+
+# Extra navigation state signals
+
+Vehicle.Cabin.Infotainment.Navigation.State:
+  datatype: string
+  type: sensor
+  allowed: [ 'UNKNOWN', 'ACTIVE', 'ARRIVED', 'STOPPED' ]
+  description: Navigation state.
+
+Vehicle.Cabin.Infotainment.Navigation.ElapsedDistance:
+  datatype: float
+  type: sensor
+  unit: km
+  description: Navigation elapsed distance.
+
+
+# Extra audio control signals
+
+Vehicle.Cabin.Infotainment.Media.Audio:
+  type: branch
+  description: Media audio controls.
+
+Vehicle.Cabin.Infotainment.Media.Audio.Balance:
+  datatype: int8
+  type: actuator
+  min: -100
+  max: 100
+  unit: percent
+  description: Audio left/right balance.
+
+Vehicle.Cabin.Infotainment.Media.Audio.Fade:
+  datatype: int8
+  type: actuator
+  min: -100
+  max: 100
+  unit: percent
+  description: Audio front/rear balance.
+
+Vehicle.Cabin.Infotainment.Media.Audio.Bass:
+  datatype: int8
+  type: actuator
+  min: -100
+  max: 100
+  unit: percent
+  description: Audio low-frequency filter control.
+
+Vehicle.Cabin.Infotainment.Media.Audio.Treble:
+  datatype: int8
+  type: actuator
+  min: -100
+  max: 100
+  unit: percent
+  description: Audio high-frequency filter control.
+
+
+# Extra steering wheel switch signals, including DBC mappings
+
+Vehicle.Cabin.SteeringWheel:
+  type: branch
+  description: AGL steering wheel demo data.
+
+Vehicle.Cabin.SteeringWheel.Switches:
+  type: branch
+  description: AGL steering wheel demo switch data.
+
+Vehicle.Cabin.SteeringWheel.Switches.VolumeUp:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel volume up switch engaged.
+  dbc2vss:
+    signal: SW_VolumeUp
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.VolumeDown:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel volume down switch engaged.
+  dbc2vss:
+    signal: SW_VolumeDown
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.VolumeMute:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel volume mute switch engaged.
+  dbc2vss:
+    signal: SW_VolumeMute
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.Next:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel next switch engaged.
+  dbc2vss:
+    signal: SW_Next
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.Previous:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel previous switch engaged.
+  dbc2vss:
+    signal: SW_Previous
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.Mode:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel mode switch engaged.
+  dbc2vss:
+    signal: SW_Mode
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.Info:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel info switch engaged.
+  dbc2vss:
+    signal: SW_Info
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseEnable:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise enable switch engaged.
+  dbc2vss:
+    signal: SW_CruiseEnable
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseSet:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise set switch engaged.
+  dbc2vss:
+    signal: SW_CruiseSet
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseResume:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise resume switch engaged.
+  dbc2vss:
+    signal: SW_CruiseResume
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseCancel:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise cancel switch engaged.
+  dbc2vss:
+    signal: SW_CruiseCancel
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseLimit:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise limit switch engaged.
+  dbc2vss:
+    signal: SW_CruiseLimit
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseDistance:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise distance switch engaged.
+  dbc2vss:
+    signal: SW_CruiseDistance
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.Voice:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel voice switch engaged.
+  dbc2vss:
+    signal: SW_Voice
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.PhoneCall:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel phone call switch engaged.
+  dbc2vss:
+    signal: SW_PhoneCall
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.PhoneHangup:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel phone hangup switch engaged.
+  dbc2vss:
+    signal: SW_PhoneHangup
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.Horn:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel horn switch engaged.
+  dbc2vss:
+    signal: SW_Horn
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.LaneDepartureWarning:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel lane departure warning switch engaged.
+  dbc2vss:
+    signal: SW_LaneDepartureWarning
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
diff --git a/recipes-connectivity/vss/vss-agl_4.0.bb b/recipes-connectivity/vss/vss-agl_4.0.bb
index 83fb4b1a1..00d83a7a5 100644
--- a/recipes-connectivity/vss/vss-agl_4.0.bb
+++ b/recipes-connectivity/vss/vss-agl_4.0.bb
@@ -8,29 +8,58 @@ inherit allarch update-alternatives
 
 require vss.inc
 
-SRC_URI += "file://agl_vss_overlay.vspec"
-
+SRC_URI += "file://agl_vss_overlay.vspec \
+            file://agl_vss_overlay.vspec.control-panel \
+            file://agl_vss_overlay.vspec.gw-control-panel \
+            file://agl_vss_overlay.vspec.gw-hardware \
+"
 # Since we're not relying on the simple upstream repo Makefile, use
 # best practices and output into a separate directory.
 B = "${WORKDIR}/build"
 
 do_configure[noexec] = "1"
 
-VSPEC2JSON_OPTS = "-e dbc -o ${WORKDIR}/agl_vss_overlay.vspec --no-uuid --json-pretty"
+#VSPEC2JSON_OPTS = "-e dbc2vss,vss2dbc -o ${WORKDIR}/agl_vss_overlay.vspec --no-uuid --json-pretty"
+VSPEC2JSON_OPTS = "-e dbc2vss,vss2dbc --no-uuid --json-pretty"
 
 do_compile() {
-    vspec2json.py -I ${S}/spec ${VSPEC2JSON_OPTS} -u ${S}/spec/units.yaml ${S}/spec/VehicleSignalSpecification.vspec vss_rel_${PV}-agl.json
+    vspec2json.py -I ${S}/spec ${VSPEC2JSON_OPTS} -o ${WORKDIR}/agl_vss_overlay.vspec -u ${S}/spec/units.yaml ${S}/spec/VehicleSignalSpecification.vspec vss_rel_${PV}-agl.json
+    vspec2json.py -I ${S}/spec ${VSPEC2JSON_OPTS} -o ${WORKDIR}/agl_vss_overlay.vspec.control-panel -u ${S}/spec/units.yaml ${S}/spec/VehicleSignalSpecification.vspec vss_rel_${PV}-agl-control-panel.json
+    vspec2json.py -I ${S}/spec ${VSPEC2JSON_OPTS} -o ${WORKDIR}/agl_vss_overlay.vspec.gw-control-panel -u ${S}/spec/units.yaml ${S}/spec/VehicleSignalSpecification.vspec vss_rel_${PV}-agl-gw-control-panel.json
+    vspec2json.py -I ${S}/spec ${VSPEC2JSON_OPTS} -o ${WORKDIR}/agl_vss_overlay.vspec.gw-hardware -u ${S}/spec/units.yaml ${S}/spec/VehicleSignalSpecification.vspec vss_rel_${PV}-agl-gw-hardware.json
 }
 
 do_install() {
     install -d ${D}${datadir}/vss
     install -m 0644 vss_rel_${PV}-agl.json ${D}${datadir}/vss/
+    install -m 0644 vss_rel_${PV}-agl-control-panel.json ${D}${datadir}/vss/
+    install -m 0644 vss_rel_${PV}-agl-gw-control-panel.json ${D}${datadir}/vss/
+    install -m 0644 vss_rel_${PV}-agl-gw-hardware.json ${D}${datadir}/vss/
 }
 
+PACKAGE_BEFORE_PN += "${PN}-control-panel ${PN}-gw-control-panel ${PN}-gw-hardware"
+
 ALTERNATIVE_LINK_NAME[vss.json] = "${datadir}/vss/vss.json"
 
-ALTERNATIVE_PRIORITY = "20"
 ALTERNATIVE:${PN} = "vss.json"
 ALTERNATIVE_TARGET_${PN} = "${datadir}/vss/vss_rel_${PV}-agl.json"
+ALTERNATIVE_PRIORITY_${PN} = "20"
+FILES:${PN} += "${datadir}/vss/vss_rel_${PV}-agl.json"
+
+ALTERNATIVE:${PN}-control-panel = "vss.json"
+ALTERNATIVE_TARGET_${PN}-control-panel = "${datadir}/vss/vss_rel_${PV}-agl-control-panel.json"
+ALTERNATIVE_PRIORITY_${PN}-control-panel = "30"
+FILES:${PN}-control-panel += "${datadir}/vss/vss_rel_${PV}-agl-control-panel.json"
+
+ALTERNATIVE:${PN}-gw-hardware = "vss.json"
+ALTERNATIVE_TARGET_${PN}-gw-hardware = "${datadir}/vss/vss_rel_${PV}-agl-gw-hardware.json"
+ALTERNATIVE_PRIORITY_${PN}-gw-hardware = "31"
+FILES:${PN}-gw-hardware += "${datadir}/vss/vss_rel_${PV}-agl-gw-hardware.json"
 
-FILES:${PN} += "${datadir}/vss/"
+# Higher priority than gw-hardware, as we want it to be the default
+# if both are installed (as is the case with the full gateway demo
+# setup).
+ALTERNATIVE:${PN}-gw-control-panel = "vss.json"
+ALTERNATIVE_TARGET_${PN}-gw-control-panel = "${datadir}/vss/vss_rel_${PV}-agl-gw-control-panel.json"
+ALTERNATIVE_PRIORITY_${PN}-gw-control-panel = "32"
+FILES:${PN}-gw-control-panel += "${datadir}/vss/vss_rel_${PV}-agl-gw-control-panel.json"