Add gateway demo

Changes:
- Add recipe for AGL VSS to MQTT proxy daemon
- Update agl-vcar.dbc CAN database definition to add signals useful
  for demoing the proxy (per V2C EG discussion).
- Add a patch to kuksa-dbc-feeder to allow sensor signal updates to
  generate CAN messages in output mode.
- Add VSS vspec variants to define the desired CAN input and output
  support for the various kuksa-dbc-feeder instances in the default
  and full gateway demos.
- Add configurations for kuksa-dbc-feeder for the running the default
  gateway demo with CAN output from a demo control panel instance on
  a single CAN interface, as well as a fuller setup with a second
  kuksa-dbc-feeder running against a second CAN interface on the
  gateway to handle the demo steering wheel and HVAC support.
- Add gateway demo specific configuration files for various KUKSA.val
  databroker clients to override the databroker location.
- Add agl-gateway-demo and agl-gateway-demo-preconfigured images for
  the default and full demos.
- Add *-preconfigured-gateway image flavors for the Flutter IVI, IC,
  and KVM demo images that support running with the databroker on
  the gateway.

NOTES:
- The *-preconfigured-gateway images assume the gateway has an IP
  address of 192.168.10.4.
- Required changes to the agl-demo-control-panel application and the
  addition of a agl-ivi-demo-control-panel-preconfigured-gateway
  image will come in a subsequent change.

Bug-AGL: SPEC-5107, SPEC-5138

Change-Id: I9797aa72737af7af3d791a5151198f80b6d90e0d
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29921
ci-image-boot-test: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
Tested-by: Jenkins Job builder account

20 files changed, 1853 insertions, 32 deletions

diff --git a/recipes-connectivity/agl-vss-proxy/agl-vss-proxy/agl-vss-proxy.json b/recipes-connectivity/agl-vss-proxy/agl-vss-proxy/agl-vss-proxy.json
new file mode 100644
index 000000000..fe04b0379
--- /dev/null
+++ b/recipes-connectivity/agl-vss-proxy/agl-vss-proxy/agl-vss-proxy.json
@@ -0,0 +1,10 @@
+{
+  "sub": "local dev",
+  "iss": "createToken.py",
+  "aud": [
+    "kuksa.val"
+  ],
+  "iat": 1516239022,
+  "exp": 1767225599,
+  "scope": "read"
+}
\ No newline at end of file
diff --git a/recipes-connectivity/agl-vss-proxy/agl-vss-proxy/agl-vss-proxy.token b/recipes-connectivity/agl-vss-proxy/agl-vss-proxy/agl-vss-proxy.token
new file mode 100644
index 000000000..10fafb537
--- /dev/null
+++ b/recipes-connectivity/agl-vss-proxy/agl-vss-proxy/agl-vss-proxy.token
@@ -0,0 +1 @@
+eyJ0eXAiOiJKV1QiLCJhbGciOiJSUzI1NiJ9.eyJzdWIiOiJsb2NhbCBkZXYiLCJpc3MiOiJjcmVhdGVUb2tlbi5weSIsImF1ZCI6WyJrdWtzYS52YWwiXSwiaWF0IjoxNTE2MjM5MDIyLCJleHAiOjE3NjcyMjU1OTksInNjb3BlIjoicmVhZCJ9.P6tJPRSJWB51UOFDFs8qQ-lGqb1NoWgCekHUKyMiYcs8sR3FGVKSRjSkcqv1tXOlILvqhUwyuTKui25_kFKkTPv47GI0xAqcXtaTmDwHAWZHFC6HWGWGXohu7XvURrim5kMRVHy_VGlzasGgVap0JFk3wmaY-nyFYL_PLDjvGjIQuOwFiUtKK1PfiKviZKyc5EzPUEAoHxFL_BSOsTdDDcaydFe9rSKJzpYrj7qXY0hMJCje2BUGlSUIttR95aSjOZflSxiGystWHME8fKMmDERAx749Jpt37M3taCxBsUzER5olPz65MGzFSikfC-jH_KGmJ4zNYS65_OM1a-CPfW7Ts__pyAXxFULNMHRMIfh8Wiig4UcooMy_ZJO_DN2rq95XdaBbzRua5mxvO2wM6iu5kv4lhNxhjVNGuWFRLLJ_icBUZlvAuC3eqp66B-Y3jJNI0cSnIvsVX8YFVS3ebW8tf40OdeVou8fWZPcQsFAAafBhIxNOW8FbLZ9sRvQ-FGwZy-GyF52IJ5ZKeGfAkeEh9ZLIcyJ2YlGp4q0EOKIdwIBsWfCFtZbAvi2ornO3XvJm94NBqprpvQYN_IB7yyRxDduLjNKqqcFqnrlWYI-ZhvghWH2rEblplgHZdyVD1G9Mbv0_zdNTKFs6J7IP96aV6-4hBOt3kROlS1G7ObA
\ No newline at end of file
diff --git a/recipes-connectivity/agl-vss-proxy/agl-vss-proxy_git.bb b/recipes-connectivity/agl-vss-proxy/agl-vss-proxy_git.bb
new file mode 100644
index 000000000..b16116e65
--- /dev/null
+++ b/recipes-connectivity/agl-vss-proxy/agl-vss-proxy_git.bb
@@ -0,0 +1,47 @@
+SUMMARY     = "AGL VSS Proxy"
+DESCRIPTION = "AGL VSS Proxy"
+HOMEPAGE    = "https://gerrit.automotivelinux.org/gerrit/#/admin/projects/apps/agl-vss-proxy"
+
+LICENSE     = "Apache-2.0"
+LIC_FILES_CHKSUM = "file://LICENSE;md5=ae6497158920d9524cf208c09cc4c984"
+
+DEPENDS = " \
+    glib-2.0 \
+    yaml-cpp \
+    protobuf-native \
+    grpc-native \
+    protobuf \
+    grpc \
+    kuksa-databroker \
+    mosquitto \
+"
+
+SRC_URI = "git://gerrit.automotivelinux.org/gerrit/src/agl-vss-proxy;protocol=https;branch=${AGL_BRANCH} \
+           file://agl-vss-proxy.token \
+"
+SRCREV  = "e437300d0b5c20114ea1843dbf00815304af3f27"
+
+PV = "1.0+git${SRCPV}"
+S  = "${WORKDIR}/git"
+
+inherit meson pkgconfig systemd
+
+EXTRA_OEMESON += "-Dprotos=${STAGING_INCDIR}"
+
+SYSTEMD_SERVICE:${PN} = "agl-vss-proxy.service"
+
+do_install:append() {
+    # Currently using default global client and CA certificates
+    # for KUKSA.val SSL, installing app specific ones would go here.
+
+    # VIS authorization token file for KUKSA.val should ideally not
+    # be readable by other users, but currently that's not doable
+    # until a packaging/sandboxing/MAC scheme is (re)implemented or
+    # something like OAuth is plumbed in as an alternative.
+    install -d ${D}${sysconfdir}/agl-vss-proxy
+    install -m 0644 ${WORKDIR}/agl-vss-proxy.token ${D}${sysconfdir}/agl-vss-proxy/
+}
+
+FILES:${PN} += "${systemd_system_unitdir}"
+
+RDEPENDS:${PN} += "kuksa-databroker kuksa-databroker-agl"
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-control-panel.bb b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-control-panel.bb
new file mode 100644
index 000000000..4afcfaf10
--- /dev/null
+++ b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-control-panel.bb
@@ -0,0 +1,25 @@
+SUMMARY = "KUKSA.val DBC feeder configuration for gateway demo"
+
+LICENSE = "Apache-2.0"
+LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/Apache-2.0;md5=89aea4e17d99a7cacdbeed46a0096b10"
+
+SRC_URI = "file://kuksa-dbc-feeder.gw-control-panel"
+
+S = "${WORKDIR}"
+
+inherit update-alternatives
+
+do_compile[noexec] = "1"
+
+do_install() {
+    install -d ${D}${sysconfdir}/default
+    install -m 0644 ${WORKDIR}/kuksa-dbc-feeder.gw-control-panel ${D}${sysconfdir}/default/
+}
+
+ALTERNATIVE_LINK_NAME[kuksa-dbc-feeder.env] = "${sysconfdir}/default/kuksa-dbc-feeder"
+
+RPROVIDES:${PN} = "kuksa-dbc-feeder.env"
+ALTERNATIVE:${PN} = "kuksa-dbc-feeder.env"
+ALTERNATIVE_TARGET_${PN} = "${sysconfdir}/default/kuksa-dbc-feeder.gw-control-panel"
+
+RDEPENDS:${PN} += "kuksa-dbc-feeder"
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-control-panel/kuksa-dbc-feeder.gw-control-panel b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-control-panel/kuksa-dbc-feeder.gw-control-panel
new file mode 100644
index 000000000..d6d2e6073
--- /dev/null
+++ b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-control-panel/kuksa-dbc-feeder.gw-control-panel
@@ -0,0 +1,4 @@
+# Leave DBC output disabled until cruise support is added to the
+# control panel simulator
+EXTRA_ARGS="--no-val2dbc --dbc2val --dbc-default /etc/kuksa-dbc-feeder/dbc_default_values.json"
+#LOG_LEVEL=debug
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware.bb b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware.bb
new file mode 100644
index 000000000..513a3f6ef
--- /dev/null
+++ b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware.bb
@@ -0,0 +1,32 @@
+SUMMARY = "KUKSA.val DBC feeder configuration for gateway demo (secondary CAN interface)"
+
+LICENSE = "Apache-2.0"
+LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/Apache-2.0;md5=89aea4e17d99a7cacdbeed46a0096b10"
+
+SRC_URI = "file://kuksa-dbc-feeder.gw-hardware \
+           file://config.ini.gw-hardware \
+           file://kuksa-dbc-feeder-can1.service \
+"
+
+S = "${WORKDIR}"
+
+inherit systemd update-alternatives
+
+SYSTEMD_SERVICE:${PN} = "kuksa-dbc-feeder-can1.service"
+
+do_compile[noexec] = "1"
+
+do_install() {
+    install -d ${D}${sysconfdir}/default
+    install -m 0644 ${WORKDIR}/kuksa-dbc-feeder.gw-hardware ${D}${sysconfdir}/default/
+    install -d ${D}${sysconfdir}/kuksa-dbc-feeder
+    install -m 0644 ${WORKDIR}/config.ini.gw-hardware ${D}${sysconfdir}/kuksa-dbc-feeder/
+    if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)}; then
+        install -d ${D}${systemd_system_unitdir}
+        install -m 0644 ${WORKDIR}/kuksa-dbc-feeder-can1.service ${D}${systemd_system_unitdir}
+    fi
+}
+
+FILES:${PN} += "${systemd_system_unitdir}"
+
+RDEPENDS:${PN} += "kuksa-dbc-feeder vss-agl-gw-hardware"
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware/config.ini.gw-hardware b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware/config.ini.gw-hardware
new file mode 100644
index 000000000..ee3541a5f
--- /dev/null
+++ b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware/config.ini.gw-hardware
@@ -0,0 +1,30 @@
+[general]
+# server type:
+# switch between kuksa_databroker and kuksa_val_server
+server_type = kuksa_databroker
+# VSS mapping file
+mapping = /usr/share/vss/vss_rel_4.0-agl-gw-hardware.json
+
+# IP address for server (KUKSA.val Server or Databroker)
+ip = localhost
+
+# Port for server (KUKSA.val Server or Databroker)
+port = 55555
+
+# Shall TLS be used (default False for Databroker, True for KUKSA.val Server)
+tls = True
+
+# TLS-related settings
+# Path to root CA, needed if using TLS
+root_ca_path=/etc/kuksa-val/CA.pem
+
+# Token file for authorization.
+token = /etc/kuksa-dbc-feeder/dbc_feeder.token
+
+[can]
+# CAN port
+port = can1
+# Enable SAE-J1939 Mode. False: ignore
+j1939 = False
+# DBC file used to parse CAN messages
+dbcfile = /etc/kuksa-dbc-feeder/agl-vcar.dbc
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware/kuksa-dbc-feeder-can1.service b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware/kuksa-dbc-feeder-can1.service
new file mode 100644
index 000000000..6f123dd57
--- /dev/null
+++ b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware/kuksa-dbc-feeder-can1.service
@@ -0,0 +1,12 @@
+[Unit]
+Description=Eclipse KUKSA.val DBC feeder (can1)
+Requires=kuksa-databroker.service can-dev-helper.service
+After=kuksa-databroker.service can-dev-helper.service
+
+[Service]
+EnvironmentFile=-/etc/default/kuksa-dbc-feeder.gw-hardware
+ExecStart=/usr/bin/dbcfeeder.py $EXTRA_ARGS
+Restart=on-failure
+
+[Install]
+WantedBy=multi-user.target
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware/kuksa-dbc-feeder.gw-hardware b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware/kuksa-dbc-feeder.gw-hardware
new file mode 100644
index 000000000..562a56b8b
--- /dev/null
+++ b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware/kuksa-dbc-feeder.gw-hardware
@@ -0,0 +1,3 @@
+# DBC input for steering wheel, output for HVAC
+EXTRA_ARGS="--val2dbc --dbc2val --dbc-default /etc/kuksa-dbc-feeder/dbc_default_values.json --config /etc/kuksa-dbc-feeder/config.ini.gw-hardware"
+#LOG_LEVEL=debug
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/0004-Enable-val2dbc-for-sensor-values.patch b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/0004-Enable-val2dbc-for-sensor-values.patch
new file mode 100644
index 000000000..7f22a90ad
--- /dev/null
+++ b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/0004-Enable-val2dbc-for-sensor-values.patch
@@ -0,0 +1,142 @@
+From d6f1aaa7f26aa52f4b219f60e704d5ab2954f082 Mon Sep 17 00:00:00 2001
+From: Scott Murray <scott.murray@konsulko.com>
+Date: Wed, 3 Apr 2024 02:09:11 +0900
+Subject: [PATCH] Enable val2dbc for sensor values
+
+Rework to allow val2dbc mode to write out sensor values in
+addition to actuator target values.
+
+Upstream-Status: pending
+
+Signed-off-by: Scott Murray <scott.murray@konsulko.com>
+---
+ dbc2val/dbcfeeder.py                           |  8 ++++++--
+ .../dbcfeederlib/databrokerclientwrapper.py    | 18 ++++++++++++------
+ dbc2val/dbcfeederlib/dbc2vssmapper.py          | 14 +++++++++-----
+ dbc2val/dbcfeederlib/serverclientwrapper.py    |  2 +-
+ 4 files changed, 28 insertions(+), 14 deletions(-)
+
+diff --git a/dbc2val/dbcfeeder.py b/dbc2val/dbcfeeder.py
+index e7fd319..5e0df2f 100755
+--- a/dbc2val/dbcfeeder.py
++++ b/dbc2val/dbcfeeder.py
+@@ -322,15 +322,19 @@ class Feeder:
+         log.debug("vss-Update callback!")
+         dbc_ids = set()
+         for update in updates:
++            value = None
+             if update.entry.value is not None:
+-                # This shall currently never happen as we do not subscribe to this
+                 log.warning(f"Current value for {update.entry.path} is now: "
+                             f"{update.entry.value.value} of type {type(update.entry.value.value)}")
++                value = update.entry.value.value
+ 
+             if update.entry.actuator_target is not None:
+                 log.debug(f"Target value for {update.entry.path} is now: {update.entry.actuator_target} "
+                           f"of type {type(update.entry.actuator_target.value)}")
+-                new_dbc_ids = self._mapper.handle_update(update.entry.path, update.entry.actuator_target.value)
++                value = update.entry.actuator_target.value
++
++            if value != None:
++                new_dbc_ids = self._mapper.handle_update(update.entry.path, value)
+                 dbc_ids.update(new_dbc_ids)
+ 
+         can_ids = set()
+diff --git a/dbc2val/dbcfeederlib/databrokerclientwrapper.py b/dbc2val/dbcfeederlib/databrokerclientwrapper.py
+index 35836e9..46ae330 100644
+--- a/dbc2val/dbcfeederlib/databrokerclientwrapper.py
++++ b/dbc2val/dbcfeederlib/databrokerclientwrapper.py
+@@ -200,14 +200,20 @@ class DatabrokerClientWrapper(clientwrapper.ClientWrapper):
+     def supports_subscription(self) -> bool:
+         return True
+ 
+-    async def subscribe(self, vss_names: List[str], callback):
++    async def subscribe(self, vss_entries: dict[str, str], callback):
+         """Creates a subscription and calls the callback when data received"""
+         entries = []
+-        for name in vss_names:
+-            # Always subscribe to target
+-            subscribe_entry = SubscribeEntry(name, View.FIELDS, [Field.ACTUATOR_TARGET])
+-            log.info(f"Subscribe entry: {subscribe_entry}")
+-            entries.append(subscribe_entry)
++        for name, signal_type in vss_entries.items():
++            if signal_type == "actuator":
++                subscribe_entry = SubscribeEntry(name, View.FIELDS, [Field.ACTUATOR_TARGET])
++                log.info(f"Subscribe entry: {subscribe_entry}")
++                entries.append(subscribe_entry)
++            if signal_type == "sensor":
++                subscribe_entry = SubscribeEntry(name, View.FIELDS, [Field.VALUE])
++                log.info(f"Subscribe entry: {subscribe_entry}")
++                entries.append(subscribe_entry)
++        if not entries:
++            return
+ 
+         # If there is a path VSSClient will request a secure connection
+         if self._tls and self._root_ca_path:
+diff --git a/dbc2val/dbcfeederlib/dbc2vssmapper.py b/dbc2val/dbcfeederlib/dbc2vssmapper.py
+index 5142a5e..8f04cdd 100644
+--- a/dbc2val/dbcfeederlib/dbc2vssmapper.py
++++ b/dbc2val/dbcfeederlib/dbc2vssmapper.py
+@@ -61,12 +61,13 @@ class VSSMapping:
+     parser: Parser = Parser()
+ 
+     def __init__(self, vss_name: str, dbc_name: str, transform: dict, interval_ms: int,
+-                 on_change: bool, datatype: str, description: str):
++                 on_change: bool, signal_type: str, datatype: str, description: str):
+         self.vss_name = vss_name
+         self.dbc_name = dbc_name
+         self.transform = transform
+         self.interval_ms = interval_ms
+         self.on_change = on_change
++        self.signal_type = signal_type
+         self.datatype = datatype
+         self.description = description
+         # For time comparison (interval_ms) we store last value used for comparison. Unit seconds.
+@@ -282,7 +283,7 @@ class Mapper:
+                 log.info(f"Using default interval 1000 ms for {expanded_name}")
+                 interval = 1000
+         mapping_entry = VSSMapping(expanded_name, dbc_name, transform, interval, on_change,
+-                                   node["datatype"], node["description"])
++                                   node["type"], node["datatype"], node["description"])
+         if dbc_name not in self.dbc2val_mapping:
+             self.dbc2val_mapping[dbc_name] = []
+         self.dbc2val_mapping[dbc_name].append(mapping_entry)
+@@ -306,7 +307,7 @@ class Mapper:
+             log.warning(f"interval_ms attribute ignored for {expanded_name}")
+ 
+         mapping_entry = VSSMapping(expanded_name, dbc_name, transform, interval, on_change,
+-                                   node["datatype"], node["description"])
++                                   node["type"], node["datatype"], node["description"])
+         if dbc_name not in self.val2dbc_mapping:
+             self.val2dbc_mapping[expanded_name] = []
+         self.val2dbc_mapping[expanded_name].append(mapping_entry)
+@@ -380,9 +381,12 @@ class Mapper:
+         """Return a set of all dbc names used for reception"""
+         return self.dbc2val_mapping.keys()
+ 
+-    def get_val2dbc_entries(self) -> KeysView:
++    def get_val2dbc_entries(self) -> Dict[str, str]:
+         """Return a set of all vss names used for reception"""
+-        return self.val2dbc_mapping.keys()
++        entries: Dict[str, str] = {}
++        for name, mappings in self.val2dbc_mapping.items():
++            entries[name] = mappings[0].signal_type
++        return entries
+ 
+     def get_vss_names(self) -> Set[str]:
+         """Get all VSS names used in mappings, both vss2dbc and dbc2vss"""
+diff --git a/dbc2val/dbcfeederlib/serverclientwrapper.py b/dbc2val/dbcfeederlib/serverclientwrapper.py
+index 63bc12e..ca11daf 100644
+--- a/dbc2val/dbcfeederlib/serverclientwrapper.py
++++ b/dbc2val/dbcfeederlib/serverclientwrapper.py
+@@ -125,6 +125,6 @@ class ServerClientWrapper(clientwrapper.ClientWrapper):
+         log.info("Feature not implemented")
+         return False
+ 
+-    async def subscribe(self, vss_names: List[str], callback):
++    async def subscribe(self, vss_entries: dict[str, str], callback):
+         log.error("Feature not implemented")
+         return
+-- 
+2.34.1
+
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/agl-vcar.dbc b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/agl-vcar.dbc
index 0d0121398..e638d1287 100644
--- a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/agl-vcar.dbc
+++ b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/agl-vcar.dbc
@@ -10,6 +10,44 @@ BO_ 985 Vehicle_Status_2: 8 Vector_XXX
   SG_ PT_EngineSpeed : 23|16@0+ (0.25,0) [0|0] "" Vector_XXX
   SG_ PT_FuelLevelLow : 55|1@1+ (1,0) [0|1] "" Vector_XXX
 
+BO_ 986 Vehicle_Status_3: 8 Vector_XXX
+  SG_ PT_HazardOn : 0|1@1+ (1,0) [0|1] "" Vector_XXX
+  SG_ PT_LeftTurnOn : 1|1@1+ (1,0) [0|1] "" Vector_XXX
+  SG_ PT_RightTurnOn : 2|1@1+ (1,0) [0|1] "" Vector_XXX
+
+BO_ 48 HVAC_Control_1: 8 Vector_XXX
+  SG_ PT_TempLeft : 7|8@0+ (0.4166666667,0) [0|100] "C" Vector_XXX
+  SG_ PT_TempRight : 15|8@0+ (0.4166666667,0) [0|100] "C" Vector_XXX
+  SG_ PT_FanSpeed : 39|8@0+ (0.392157,0) [0|100] "%" Vector_XXX
+
+BO_ 401 Engine: 8 Vector__XXX
+ SG_ ThrottlePosition : 63|8@0+ (0.392157,0) [0|100.000035] "%" Vector__XXX
+ 
+BO_ 381 ABS: 8 Vector__XXX
+ SG_ VehicleSpeed : 7|12@0+ (0.0625,0) [0|255.9375] "km / h"  ECM_HS,BCM_HS
+ SG_ SteeringPosition : 23|12@0+ (0.0439453125,-90) [-90|89.9560546875] "deg"  ECM_HS,BCM_HS
+ SG_ BrakePressure : 39|8@0+ (75,0) [0|19125] "kPa"  ECM_HS,BCM_HS
+ 
+BO_ 532 Transmission: 8 Vector__XXX
+ SG_ Gear : 7|8@0+ (1,-1) [-1|127] ""  ECM_HS,BCM_HS
+ 
+BO_ 533 Airbag: 8 Vector__XXX
+ SG_ CollisionIntensity : 7|12@0+ (24.4140625,0) [0|100000] "N"  ECM_HS,BCM_HS
+ 
+BO_ 534 IMU1: 8 Vector__XXX
+ SG_ AccelerationX : 7|12@0+ (0.48828125,-1000) [-1000|1000] "m/s^2"  ECM_HS,BCM_HS
+ SG_ AccelerationY : 23|12@0+ (0.48828125,-1000) [-1000|1000] "m/s^2"  ECM_HS,BCM_HS
+ SG_ AccelerationZ : 39|12@0+ (0.48828125,-1000) [-1000|1000] "m/s^2"  ECM_HS,BCM_HS
+ 
+BO_ 535 IMU2: 8 Vector__XXX
+ SG_ GyroscopeX : 7|12@0+ (0.48828125,-1000) [-1000|1000] "rad/s"  ECM_HS,BCM_HS
+ SG_ GyroscopeY : 23|12@0+ (0.48828125,-1000) [-1000|1000] "rad/s"  ECM_HS,BCM_HS
+ SG_ GyroscopeZ : 39|12@0+ (0.48828125,-1000) [-1000|1000] "rad/s"  ECM_HS,BCM_HS
+ 
+BO_ 536 GNSS: 8 Vector__XXX
+ SG_ Latitude : 7|32@0+ (0.0000000419095158577,-90) [-90|90] "deg"  ECM_HS,BCM_HS
+ SG_ Longitude : 39|32@0+ (0.00000008381903171539,-180) [-180|180] "deg"  ECM_HS,BCM_HS
+
 BO_ 33 Steering_Wheel: 8 Vector_XXX
   SG_ SW_Previous : 39|1@1+ (1,0) [0|1] "" Vector_XXX
   SG_ SW_VolumeUp : 38|1@1+ (1,0) [0|1] "" Vector_XXX
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/dbc_default_values.json b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/dbc_default_values.json
new file mode 100644
index 000000000..0562569db
--- /dev/null
+++ b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/dbc_default_values.json
@@ -0,0 +1,40 @@
+{
+    "PT_VehicleAvgSpeed" : 0,
+    "PT_FuelLevelPct" : 0,
+    "PT_EngineSpeed" : 0,
+    "PT_FuelLevelLow" : 0,
+    "PT_TempLeft" : 0,
+    "PT_TempRight" : 0,
+    "PT_FanSpeed" : 0,
+    "ThrottlePosition" : 0,
+    "VehicleSpeed" : 0,
+    "SteeringPosition" : 0,
+    "BrakePressure" : 0,
+    "Gear" : 0,
+    "AccelerationX" : 0,
+    "AccelerationY" : 0,
+    "AccelerationZ" : 0,
+    "GyroscopeX" : 0,
+    "GyroscopeY" : 0,
+    "GyroscopeZ" : 0,
+    "Latitude" : 0,
+    "Longitude" : 0,
+    "SW_Previous" : 0,
+    "SW_VolumeUp" : 0,
+    "SW_Mode" : 0,
+    "SW_VolumeDown" : 0,
+    "SW_Next" : 0,
+    "SW_Info" : 0,
+    "SW_VolumeMute" : 0,
+    "SW_Voice" : 0,
+    "SW_PhoneHangup" : 0,
+    "SW_PhoneCall" : 0,
+    "SW_CruiseEnable" : 0,
+    "SW_CruiseResume" : 0,
+    "SW_CruiseSet" : 0,
+    "SW_CruiseCancel" : 0,
+    "SW_CruiseLimit" : 0,
+    "SW_CruiseDistance" : 0,
+    "SW_Horn" : 0,
+    "SW_LaneDepartureWarning" : 0
+}
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/kuksa-dbc-feeder.default b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/kuksa-dbc-feeder.default
new file mode 100644
index 000000000..5d787158d
--- /dev/null
+++ b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/kuksa-dbc-feeder.default
@@ -0,0 +1,3 @@
+# For output only mode:
+#EXTRA_ARGS="--val2dbc --no-dbc2val --dbc-default /etc/kuksa-dbc-feeder/dbc_default_values.json"
+#LOG_LEVEL=debug
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/kuksa-dbc-feeder.service b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/kuksa-dbc-feeder.service
index a30018c6f..857f5c7d2 100644
--- a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/kuksa-dbc-feeder.service
+++ b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/kuksa-dbc-feeder.service
@@ -4,7 +4,8 @@ Requires=kuksa-databroker.service can-dev-helper.service
 After=kuksa-databroker.service can-dev-helper.service
 
 [Service]
-ExecStart=/usr/bin/dbcfeeder.py
+EnvironmentFile=-/etc/default/kuksa-dbc-feeder
+ExecStart=/usr/bin/dbcfeeder.py $EXTRA_ARGS
 Restart=on-failure
 
 [Install]
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder_git.bb b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder_git.bb
index 809152bb0..281f10ac3 100644
--- a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder_git.bb
+++ b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder_git.bb
@@ -13,16 +13,19 @@ SRC_URI = "git://github.com/eclipse/kuksa.val.feeders.git;protocol=https;branch=
            file://0001-dbc2val-add-installation-mechanism.patch \
            file://0002-dbc2val-usability-improvements.patch \
            file://0003-dbc2val-fix-token-file-configuration-option.patch \
+           file://0004-Enable-val2dbc-for-sensor-values.patch \
            file://config.ini \
            file://dbc_feeder.token \
            file://agl-vcar.dbc \
+           file://dbc_default_values.json \
            file://kuksa-dbc-feeder.service \
+	   file://kuksa-dbc-feeder.default \
            "
 SRCREV = "5bb52eca8d79f7c05a024f69b1faab81dabacdcd"
 
 S = "${WORKDIR}/git"
 
-inherit setuptools3 systemd
+inherit setuptools3 systemd update-alternatives
 
 SETUPTOOLS_SETUP_PATH = "${S}/dbc2val"
 
@@ -36,12 +39,18 @@ do_install:append() {
     # investigation.
     install -m 0600 ${WORKDIR}/dbc_feeder.token ${D}${sysconfdir}/kuksa-dbc-feeder/
     install -m 0644 ${WORKDIR}/agl-vcar.dbc ${D}${sysconfdir}/kuksa-dbc-feeder/
+    install -m 0644 ${WORKDIR}/dbc_default_values.json ${D}${sysconfdir}/kuksa-dbc-feeder/
+    install -d ${D}${sysconfdir}/default
+    install -m 0644 ${WORKDIR}/kuksa-dbc-feeder.default ${D}${sysconfdir}/default/
     if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)}; then
         install -d ${D}${systemd_system_unitdir}
         install -m 0644 ${WORKDIR}/kuksa-dbc-feeder.service ${D}${systemd_system_unitdir}
     fi
 }
 
+ALTERNATIVE_LINK_NAME[kuksa-dbc-feeder.env] = "${sysconfdir}/default/kuksa-dbc-feeder"
+
+ALTERNATIVE_TARGET_${PN} = "${sysconfdir}/default/kuksa-dbc-feeder.default"
 FILES:${PN} += "${systemd_system_unitdir}"
 
 RDEPENDS:${PN} += " \
diff --git a/recipes-connectivity/vss/vss-agl/agl_vss_overlay.vspec b/recipes-connectivity/vss/vss-agl/agl_vss_overlay.vspec
index 6c0a08ae2..b8a01e362 100644
--- a/recipes-connectivity/vss/vss-agl/agl_vss_overlay.vspec
+++ b/recipes-connectivity/vss/vss-agl/agl_vss_overlay.vspec
@@ -1,23 +1,184 @@
-# Define DBC mappings for vehicle and engine speeds
+# DBC mappings for vehicle and engine speeds
 
 Vehicle.Speed:
   datatype: float
   type: sensor
-  dbc:
+  dbc2vss:
     signal: PT_VehicleAvgSpeed
     interval_ms: 100
+  vss2dbc:
+    signal: PT_VehicleAvgSpeed
 
 Vehicle.Powertrain.CombustionEngine.Speed:
   datatype: float
   type: sensor
-  dbc:
+  dbc2vss:
     signal: PT_EngineSpeed
     interval_ms: 100
     transform:
       math: "floor(x+0.5)"
+  vss2dbc:
+    signal: PT_EngineSpeed
+
+# DBC mappings for other signals for V2C demo
+
+Vehicle.Body.Lights.Hazard.IsSignaling:
+  datatype: boolean
+  type: actuator
+  dbc2vss:
+    signal: PT_HazardOn
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Body.Lights.DirectionIndicator.Left.IsSignaling:
+  datatype: boolean
+  type: actuator
+  dbc2vss:
+    signal: PT_LeftTurnOn
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Body.Lights.DirectionIndicator.Right.IsSignaling:
+  datatype: boolean
+  type: actuator
+  dbc2vss:
+    signal: PT_RightTurnOn
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.OBD.ThrottlePosition:
+  datatype: float
+  type: sensor
+  dbc2vss:
+    signal: ThrottlePosition
+    interval_ms: 100
+  vss2dbc:
+    signal: ThrottlePosition
+
+Vehicle.Chassis.SteeringWheel.Angle:
+  datatype: int16
+  type: sensor
+  dbc2vss:
+    signal: SteeringPosition
+    interval_ms: 100
+  vss2dbc:
+    signal: SteeringPosition
+
+Vehicle.Chassis.Brake.PedalPosition:
+  datatype: uint8
+  type: sensor
+  dbc2vss:
+    signal: BrakePressure
+    interval_ms: 100
+    transform:
+      math: "floor(x / 19125 * 100 + 0.5)"
+  vss2dbc:
+    signal: BrakePressure
+    transform:
+      math: "x * 191.25"
+
+Vehicle.Powertrain.Transmission.SelectedGear:
+  datatype: int8
+  type: sensor
+  dbc2vss:
+    signal: Gear
+    interval_ms: 100
+  vss2dbc:
+    signal: Gear
+
+Vehicle.Acceleration.Lateral:
+  datatype: float
+  type: sensor
+  dbc2vss:
+    signal: AccelerationX
+    interval_ms: 100
+  vss2dbc:
+    signal: AccelerationX
+
+Vehicle.Acceleration.Longitudinal:
+  datatype: float
+  type: sensor
+  dbc2vss:
+    signal: AccelerationY
+    interval_ms: 100
+  vss2dbc:
+    signal: AccelerationY
+
+Vehicle.Acceleration.Vertical:
+  datatype: float
+  type: sensor
+  dbc2vss:
+    signal: AccelerationZ
+    interval_ms: 100
+  vss2dbc:
+    signal: AccelerationZ
+
+Vehicle.AngularVelocity.Pitch:
+  datatype: float
+  type: sensor
+  dbc2vss:
+    signal: GyroscopeX
+    interval_ms: 100
+  vss2dbc:
+    signal: GyroscopeX
+
+Vehicle.AngularVelocity.Roll:
+  datatype: float
+  type: sensor
+  dbc2vss:
+    signal: GyroscopeY
+    interval_ms: 100
+  vss2dbc:
+    signal: GyroscopeY
+
+Vehicle.AngularVelocity.Yaw:
+  datatype: float
+  type: sensor
+  dbc2vss:
+    signal: GyroscopeZ
+    interval_ms: 100
+  vss2dbc:
+    signal: GyroscopeZ
+
+Vehicle.CurrentLocation.Latitude:
+  datatype: double
+  type: sensor
+  dbc2vss:
+    signal: Latitude
+    interval_ms: 100
+  vss2dbc:
+    signal: Latitude
+
+Vehicle.CurrentLocation.Longitude:
+  datatype: double
+  type: sensor
+  dbc2vss:
+    signal: Longitude
+    interval_ms: 100
+  vss2dbc:
+    signal: Longitude
+
 
+#
+# AGL VSS additions
+#
 
-# Define extra navigation state signals
+# Extra navigation state signals
 
 Vehicle.Cabin.Infotainment.Navigation.State:
   datatype: string
@@ -32,7 +193,7 @@ Vehicle.Cabin.Infotainment.Navigation.ElapsedDistance:
   description: Navigation elapsed distance.
 
 
-# Define audio control signals
+# Extra audio control signals
 
 Vehicle.Cabin.Infotainment.Media.Audio:
   type: branch
@@ -71,7 +232,7 @@ Vehicle.Cabin.Infotainment.Media.Audio.Treble:
   description: Audio high-frequency filter control.
 
 
-# Define extra steering wheel switch signals, including DBC mappings
+# Extra steering wheel switch signals, including DBC mappings
 
 Vehicle.Cabin.SteeringWheel:
   type: branch
@@ -85,7 +246,7 @@ Vehicle.Cabin.SteeringWheel.Switches.VolumeUp:
   datatype: boolean
   type: sensor
   description: Steering wheel volume up switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_VolumeUp
     on_change: true
     transform:
@@ -99,7 +260,7 @@ Vehicle.Cabin.SteeringWheel.Switches.VolumeDown:
   datatype: boolean
   type: sensor
   description: Steering wheel volume down switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_VolumeDown
     on_change: true
     transform:
@@ -113,7 +274,7 @@ Vehicle.Cabin.SteeringWheel.Switches.VolumeMute:
   datatype: boolean
   type: sensor
   description: Steering wheel volume mute switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_VolumeMute
     on_change: true
     transform:
@@ -127,7 +288,7 @@ Vehicle.Cabin.SteeringWheel.Switches.Next:
   datatype: boolean
   type: sensor
   description: Steering wheel next switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_Next
     on_change: true
     transform:
@@ -141,7 +302,7 @@ Vehicle.Cabin.SteeringWheel.Switches.Previous:
   datatype: boolean
   type: sensor
   description: Steering wheel previous switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_Previous
     on_change: true
     transform:
@@ -155,7 +316,7 @@ Vehicle.Cabin.SteeringWheel.Switches.Mode:
   datatype: boolean
   type: sensor
   description: Steering wheel mode switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_Mode
     on_change: true
     transform:
@@ -169,7 +330,7 @@ Vehicle.Cabin.SteeringWheel.Switches.Info:
   datatype: boolean
   type: sensor
   description: Steering wheel info switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_Info
     on_change: true
     transform:
@@ -183,7 +344,7 @@ Vehicle.Cabin.SteeringWheel.Switches.CruiseEnable:
   datatype: boolean
   type: sensor
   description: Steering wheel cruise enable switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_CruiseEnable
     on_change: true
     transform:
@@ -197,7 +358,7 @@ Vehicle.Cabin.SteeringWheel.Switches.CruiseSet:
   datatype: boolean
   type: sensor
   description: Steering wheel cruise set switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_CruiseSet
     on_change: true
     transform:
@@ -211,7 +372,7 @@ Vehicle.Cabin.SteeringWheel.Switches.CruiseResume:
   datatype: boolean
   type: sensor
   description: Steering wheel cruise resume switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_CruiseResume
     on_change: true
     transform:
@@ -225,7 +386,7 @@ Vehicle.Cabin.SteeringWheel.Switches.CruiseCancel:
   datatype: boolean
   type: sensor
   description: Steering wheel cruise cancel switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_CruiseCancel
     on_change: true
     transform:
@@ -239,7 +400,7 @@ Vehicle.Cabin.SteeringWheel.Switches.CruiseLimit:
   datatype: boolean
   type: sensor
   description: Steering wheel cruise limit switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_CruiseLimit
     on_change: true
     transform:
@@ -253,7 +414,7 @@ Vehicle.Cabin.SteeringWheel.Switches.CruiseDistance:
   datatype: boolean
   type: sensor
   description: Steering wheel cruise distance switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_CruiseDistance
     on_change: true
     transform:
@@ -267,7 +428,7 @@ Vehicle.Cabin.SteeringWheel.Switches.Voice:
   datatype: boolean
   type: sensor
   description: Steering wheel voice switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_Voice
     on_change: true
     transform:
@@ -281,7 +442,7 @@ Vehicle.Cabin.SteeringWheel.Switches.PhoneCall:
   datatype: boolean
   type: sensor
   description: Steering wheel phone call switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_PhoneCall
     on_change: true
     transform:
@@ -295,7 +456,7 @@ Vehicle.Cabin.SteeringWheel.Switches.PhoneHangup:
   datatype: boolean
   type: sensor
   description: Steering wheel phone hangup switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_PhoneHangup
     on_change: true
     transform:
@@ -309,7 +470,7 @@ Vehicle.Cabin.SteeringWheel.Switches.Horn:
   datatype: boolean
   type: sensor
   description: Steering wheel horn switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_Horn
     on_change: true
     transform:
@@ -323,7 +484,7 @@ Vehicle.Cabin.SteeringWheel.Switches.LaneDepartureWarning:
   datatype: boolean
   type: sensor
   description: Steering wheel lane departure warning switch engaged.
-  dbc:
+  dbc2vss:
     signal: SW_LaneDepartureWarning
     on_change: true
     transform:
diff --git a/recipes-connectivity/vss/vss-agl/agl_vss_overlay.vspec.control-panel b/recipes-connectivity/vss/vss-agl/agl_vss_overlay.vspec.control-panel
new file mode 100644
index 000000000..b5e2b8a3d
--- /dev/null
+++ b/recipes-connectivity/vss/vss-agl/agl_vss_overlay.vspec.control-panel
@@ -0,0 +1,446 @@
+# DBC mappings for vehicle and engine speeds
+
+Vehicle.Speed:
+  datatype: float
+  type: sensor
+  vss2dbc:
+    signal: PT_VehicleAvgSpeed
+
+Vehicle.Powertrain.CombustionEngine.Speed:
+  datatype: float
+  type: sensor
+  vss2dbc:
+    signal: PT_EngineSpeed
+
+# DBC mappings for other signals for V2C demo
+
+Vehicle.Body.Lights.Hazard.IsSignaling:
+  datatype: boolean
+  type: actuator
+  vss2dbc:
+    signal: PT_HazardOn
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Body.Lights.DirectionIndicator.Left.IsSignaling:
+  datatype: boolean
+  type: actuator
+  vss2dbc:
+    signal: PT_LeftTurnOn
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Body.Lights.DirectionIndicator.Right.IsSignaling:
+  datatype: boolean
+  type: actuator
+  vss2dbc:
+    signal: PT_RightTurnOn
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.OBD.ThrottlePosition:
+  datatype: float
+  type: sensor
+  vss2dbc:
+    signal: ThrottlePosition
+
+Vehicle.Chassis.SteeringWheel.Angle:
+  datatype: int16
+  type: sensor
+  vss2dbc:
+    signal: SteeringPosition
+
+Vehicle.Chassis.Brake.PedalPosition:
+  datatype: uint8
+  type: sensor
+  vss2dbc:
+    signal: BrakePressure
+    transform:
+      math: "x * 191.25"
+
+Vehicle.Powertrain.Transmission.SelectedGear:
+  datatype: int8
+  type: sensor
+  vss2dbc:
+    signal: Gear
+
+Vehicle.Acceleration.Lateral:
+  datatype: float
+  type: sensor
+  vss2dbc:
+    signal: AccelerationX
+
+Vehicle.Acceleration.Longitudinal:
+  datatype: float
+  type: sensor
+  vss2dbc:
+    signal: AccelerationY
+
+Vehicle.Acceleration.Vertical:
+  datatype: float
+  type: sensor
+  vss2dbc:
+    signal: AccelerationZ
+
+Vehicle.AngularVelocity.Pitch:
+  datatype: float
+  type: sensor
+  vss2dbc:
+    signal: GyroscopeX
+
+Vehicle.AngularVelocity.Roll:
+  datatype: float
+  type: sensor
+  vss2dbc:
+    signal: GyroscopeY
+
+Vehicle.AngularVelocity.Yaw:
+  datatype: float
+  type: sensor
+  vss2dbc:
+    signal: GyroscopeZ
+
+Vehicle.CurrentLocation.Latitude:
+  datatype: double
+  type: sensor
+  vss2dbc:
+    signal: Latitude
+
+Vehicle.CurrentLocation.Longitude:
+  datatype: double
+  type: sensor
+  vss2dbc:
+    signal: Longitude
+
+
+#
+# AGL VSS additions
+#
+
+# Extra navigation state signals
+
+Vehicle.Cabin.Infotainment.Navigation.State:
+  datatype: string
+  type: sensor
+  allowed: [ 'UNKNOWN', 'ACTIVE', 'ARRIVED', 'STOPPED' ]
+  description: Navigation state.
+
+Vehicle.Cabin.Infotainment.Navigation.ElapsedDistance:
+  datatype: float
+  type: sensor
+  unit: km
+  description: Navigation elapsed distance.
+
+
+# Extra audio control signals
+
+Vehicle.Cabin.Infotainment.Media.Audio:
+  type: branch
+  description: Media audio controls.
+
+Vehicle.Cabin.Infotainment.Media.Audio.Balance:
+  datatype: int8
+  type: actuator
+  min: -100
+  max: 100
+  unit: percent
+  description: Audio left/right balance.
+
+Vehicle.Cabin.Infotainment.Media.Audio.Fade:
+  datatype: int8
+  type: actuator
+  min: -100
+  max: 100
+  unit: percent
+  description: Audio front/rear balance.
+
+Vehicle.Cabin.Infotainment.Media.Audio.Bass:
+  datatype: int8
+  type: actuator
+  min: -100
+  max: 100
+  unit: percent
+  description: Audio low-frequency filter control.
+
+Vehicle.Cabin.Infotainment.Media.Audio.Treble:
+  datatype: int8
+  type: actuator
+  min: -100
+  max: 100
+  unit: percent
+  description: Audio high-frequency filter control.
+
+
+# Extra steering wheel switch signals, including DBC mappings
+
+Vehicle.Cabin.SteeringWheel:
+  type: branch
+  description: AGL steering wheel demo data.
+
+Vehicle.Cabin.SteeringWheel.Switches:
+  type: branch
+  description: AGL steering wheel demo switch data.
+
+Vehicle.Cabin.SteeringWheel.Switches.VolumeUp:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel volume up switch engaged.
+  dbc2vss:
+    signal: SW_VolumeUp
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.VolumeDown:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel volume down switch engaged.
+  dbc2vss:
+    signal: SW_VolumeDown
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.VolumeMute:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel volume mute switch engaged.
+  dbc2vss:
+    signal: SW_VolumeMute
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.Next:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel next switch engaged.
+  dbc2vss:
+    signal: SW_Next
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.Previous:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel previous switch engaged.
+  dbc2vss:
+    signal: SW_Previous
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.Mode:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel mode switch engaged.
+  dbc2vss:
+    signal: SW_Mode
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.Info:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel info switch engaged.
+  dbc2vss:
+    signal: SW_Info
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseEnable:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise enable switch engaged.
+  dbc2vss:
+    signal: SW_CruiseEnable
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseSet:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise set switch engaged.
+  dbc2vss:
+    signal: SW_CruiseSet
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseResume:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise resume switch engaged.
+  dbc2vss:
+    signal: SW_CruiseResume
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseCancel:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise cancel switch engaged.
+  dbc2vss:
+    signal: SW_CruiseCancel
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseLimit:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise limit switch engaged.
+  dbc2vss:
+    signal: SW_CruiseLimit
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseDistance:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise distance switch engaged.
+  dbc2vss:
+    signal: SW_CruiseDistance
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.Voice:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel voice switch engaged.
+  dbc2vss:
+    signal: SW_Voice
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.PhoneCall:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel phone call switch engaged.
+  dbc2vss:
+    signal: SW_PhoneCall
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.PhoneHangup:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel phone hangup switch engaged.
+  dbc2vss:
+    signal: SW_PhoneHangup
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.Horn:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel horn switch engaged.
+  dbc2vss:
+    signal: SW_Horn
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.LaneDepartureWarning:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel lane departure warning switch engaged.
+  dbc2vss:
+    signal: SW_LaneDepartureWarning
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
diff --git a/recipes-connectivity/vss/vss-agl/agl_vss_overlay.vspec.gw-control-panel b/recipes-connectivity/vss/vss-agl/agl_vss_overlay.vspec.gw-control-panel
new file mode 100644
index 000000000..6b0a9a38a
--- /dev/null
+++ b/recipes-connectivity/vss/vss-agl/agl_vss_overlay.vspec.gw-control-panel
@@ -0,0 +1,447 @@
+# DBC mappings for vehicle and engine speeds
+
+Vehicle.Speed:
+  datatype: float
+  type: sensor
+  dbc2vss:
+    signal: PT_VehicleAvgSpeed
+    interval_ms: 100
+
+Vehicle.Powertrain.CombustionEngine.Speed:
+  datatype: float
+  type: sensor
+  dbc2vss:
+    signal: PT_EngineSpeed
+    interval_ms: 100
+    transform:
+      math: "floor(x+0.5)"
+
+# DBC mappings for other signals for V2C demo
+
+Vehicle.Body.Lights.Hazard.IsSignaling:
+  datatype: boolean
+  type: actuator
+  dbc2vss:
+    signal: PT_HazardOn
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Body.Lights.DirectionIndicator.Left.IsSignaling:
+  datatype: boolean
+  type: actuator
+  dbc2vss:
+    signal: PT_LeftTurnOn
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Body.Lights.DirectionIndicator.Right.IsSignaling:
+  datatype: boolean
+  type: actuator
+  dbc2vss:
+    signal: PT_RightTurnOn
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.OBD.ThrottlePosition:
+  datatype: float
+  type: sensor
+  dbc2vss:
+    signal: ThrottlePosition
+    interval_ms: 100
+
+Vehicle.Chassis.SteeringWheel.Angle:
+  datatype: int16
+  type: sensor
+  dbc2vss:
+    signal: SteeringPosition
+    interval_ms: 100
+
+Vehicle.Chassis.Brake.PedalPosition:
+  datatype: uint8
+  type: sensor
+  dbc2vss:
+    signal: BrakePressure
+    interval_ms: 100
+    transform:
+      math: "floor(x / 19125 * 100 + 0.5)"
+
+Vehicle.Powertrain.Transmission.SelectedGear:
+  datatype: int8
+  type: sensor
+  dbc2vss:
+    signal: Gear
+    interval_ms: 100
+
+Vehicle.Acceleration.Lateral:
+  datatype: float
+  type: sensor
+  dbc2vss:
+    signal: AccelerationX
+    interval_ms: 100
+
+Vehicle.Acceleration.Longitudinal:
+  datatype: float
+  type: sensor
+  dbc2vss:
+    signal: AccelerationY
+    interval_ms: 100
+
+Vehicle.Acceleration.Vertical:
+  datatype: float
+  type: sensor
+  dbc2vss:
+    signal: AccelerationZ
+    interval_ms: 100
+
+Vehicle.AngularVelocity.Pitch:
+  datatype: float
+  type: sensor
+  dbc2vss:
+    signal: GyroscopeX
+    interval_ms: 100
+
+Vehicle.AngularVelocity.Roll:
+  datatype: float
+  type: sensor
+  dbc2vss:
+    signal: GyroscopeY
+    interval_ms: 100
+
+Vehicle.AngularVelocity.Yaw:
+  datatype: float
+  type: sensor
+  dbc2vss:
+    signal: GyroscopeZ
+    interval_ms: 100
+
+Vehicle.CurrentLocation.Latitude:
+  datatype: double
+  type: sensor
+  dbc2vss:
+    signal: Latitude
+    interval_ms: 100
+
+Vehicle.CurrentLocation.Longitude:
+  datatype: double
+  type: sensor
+  dbc2vss:
+    signal: Longitude
+    interval_ms: 100
+
+
+#
+# AGL VSS additions
+#
+
+# Extra navigation state signals
+
+Vehicle.Cabin.Infotainment.Navigation.State:
+  datatype: string
+  type: sensor
+  allowed: [ 'UNKNOWN', 'ACTIVE', 'ARRIVED', 'STOPPED' ]
+  description: Navigation state.
+
+Vehicle.Cabin.Infotainment.Navigation.ElapsedDistance:
+  datatype: float
+  type: sensor
+  unit: km
+  description: Navigation elapsed distance.
+
+
+# Extra audio control signals
+
+Vehicle.Cabin.Infotainment.Media.Audio:
+  type: branch
+  description: Media audio controls.
+
+Vehicle.Cabin.Infotainment.Media.Audio.Balance:
+  datatype: int8
+  type: actuator
+  min: -100
+  max: 100
+  unit: percent
+  description: Audio left/right balance.
+
+Vehicle.Cabin.Infotainment.Media.Audio.Fade:
+  datatype: int8
+  type: actuator
+  min: -100
+  max: 100
+  unit: percent
+  description: Audio front/rear balance.
+
+Vehicle.Cabin.Infotainment.Media.Audio.Bass:
+  datatype: int8
+  type: actuator
+  min: -100
+  max: 100
+  unit: percent
+  description: Audio low-frequency filter control.
+
+Vehicle.Cabin.Infotainment.Media.Audio.Treble:
+  datatype: int8
+  type: actuator
+  min: -100
+  max: 100
+  unit: percent
+  description: Audio high-frequency filter control.
+
+
+# Extra steering wheel switch signals, including DBC mappings
+
+Vehicle.Cabin.SteeringWheel:
+  type: branch
+  description: AGL steering wheel demo data.
+
+Vehicle.Cabin.SteeringWheel.Switches:
+  type: branch
+  description: AGL steering wheel demo switch data.
+
+Vehicle.Cabin.SteeringWheel.Switches.VolumeUp:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel volume up switch engaged.
+  vss2dbc:
+    signal: SW_VolumeUp
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.VolumeDown:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel volume down switch engaged.
+  vss2dbc:
+    signal: SW_VolumeDown
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.VolumeMute:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel volume mute switch engaged.
+  vss2dbc:
+    signal: SW_VolumeMute
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.Next:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel next switch engaged.
+  vss2dbc:
+    signal: SW_Next
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.Previous:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel previous switch engaged.
+  vss2dbc:
+    signal: SW_Previous
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.Mode:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel mode switch engaged.
+  vss2dbc:
+    signal: SW_Mode
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.Info:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel info switch engaged.
+  vss2dbc:
+    signal: SW_Info
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseEnable:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise enable switch engaged.
+  vss2dbc:
+    signal: SW_CruiseEnable
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseSet:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise set switch engaged.
+  vss2dbc:
+    signal: SW_CruiseSet
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseResume:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise resume switch engaged.
+  vss2dbc:
+    signal: SW_CruiseResume
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseCancel:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise cancel switch engaged.
+  vss2dbc:
+    signal: SW_CruiseCancel
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseLimit:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise limit switch engaged.
+  vss2dbc:
+    signal: SW_CruiseLimit
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseDistance:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise distance switch engaged.
+  vss2dbc:
+    signal: SW_CruiseDistance
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.Voice:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel voice switch engaged.
+  vss2dbc:
+    signal: SW_Voice
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.PhoneCall:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel phone call switch engaged.
+  vss2dbc:
+    signal: SW_PhoneCall
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.PhoneHangup:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel phone hangup switch engaged.
+  vss2dbc:
+    signal: SW_PhoneHangup
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.Horn:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel horn switch engaged.
+  vss2dbc:
+    signal: SW_Horn
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
+
+Vehicle.Cabin.SteeringWheel.Switches.LaneDepartureWarning:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel lane departure warning switch engaged.
+  vss2dbc:
+    signal: SW_LaneDepartureWarning
+    transform:
+      mapping:
+        - from: false
+          to: 0
+        - from: true
+          to: 1
diff --git a/recipes-connectivity/vss/vss-agl/agl_vss_overlay.vspec.gw-hardware b/recipes-connectivity/vss/vss-agl/agl_vss_overlay.vspec.gw-hardware
new file mode 100644
index 000000000..869b33d3d
--- /dev/null
+++ b/recipes-connectivity/vss/vss-agl/agl_vss_overlay.vspec.gw-hardware
@@ -0,0 +1,341 @@
+# DBC mappings for other signals for V2C demo
+
+# DBC mappings for demo HVAC
+
+Vehicle.Cabin.HVAC.Station.Row1.Driver.Temperature:
+  datatype: int8
+  type: actuator
+  vss2dbc:
+    signal: PT_TempLeft
+
+Vehicle.Cabin.HVAC.Station.Row1.Passenger.Temperature:
+  datatype: int8
+  type: actuator
+  vss2dbc:
+    signal: PT_TempRight
+
+Vehicle.Cabin.HVAC.Station.Row1.Driver.FanSpeed:
+  datatype: uint8
+  type: actuator
+  vss2dbc:
+    signal: PT_FanSpeed
+
+#
+# AGL VSS additions
+#
+
+# Extra navigation state signals
+
+Vehicle.Cabin.Infotainment.Navigation.State:
+  datatype: string
+  type: sensor
+  allowed: [ 'UNKNOWN', 'ACTIVE', 'ARRIVED', 'STOPPED' ]
+  description: Navigation state.
+
+Vehicle.Cabin.Infotainment.Navigation.ElapsedDistance:
+  datatype: float
+  type: sensor
+  unit: km
+  description: Navigation elapsed distance.
+
+
+# Extra audio control signals
+
+Vehicle.Cabin.Infotainment.Media.Audio:
+  type: branch
+  description: Media audio controls.
+
+Vehicle.Cabin.Infotainment.Media.Audio.Balance:
+  datatype: int8
+  type: actuator
+  min: -100
+  max: 100
+  unit: percent
+  description: Audio left/right balance.
+
+Vehicle.Cabin.Infotainment.Media.Audio.Fade:
+  datatype: int8
+  type: actuator
+  min: -100
+  max: 100
+  unit: percent
+  description: Audio front/rear balance.
+
+Vehicle.Cabin.Infotainment.Media.Audio.Bass:
+  datatype: int8
+  type: actuator
+  min: -100
+  max: 100
+  unit: percent
+  description: Audio low-frequency filter control.
+
+Vehicle.Cabin.Infotainment.Media.Audio.Treble:
+  datatype: int8
+  type: actuator
+  min: -100
+  max: 100
+  unit: percent
+  description: Audio high-frequency filter control.
+
+
+# Extra steering wheel switch signals, including DBC mappings
+
+Vehicle.Cabin.SteeringWheel:
+  type: branch
+  description: AGL steering wheel demo data.
+
+Vehicle.Cabin.SteeringWheel.Switches:
+  type: branch
+  description: AGL steering wheel demo switch data.
+
+Vehicle.Cabin.SteeringWheel.Switches.VolumeUp:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel volume up switch engaged.
+  dbc2vss:
+    signal: SW_VolumeUp
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.VolumeDown:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel volume down switch engaged.
+  dbc2vss:
+    signal: SW_VolumeDown
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.VolumeMute:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel volume mute switch engaged.
+  dbc2vss:
+    signal: SW_VolumeMute
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.Next:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel next switch engaged.
+  dbc2vss:
+    signal: SW_Next
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.Previous:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel previous switch engaged.
+  dbc2vss:
+    signal: SW_Previous
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.Mode:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel mode switch engaged.
+  dbc2vss:
+    signal: SW_Mode
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.Info:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel info switch engaged.
+  dbc2vss:
+    signal: SW_Info
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseEnable:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise enable switch engaged.
+  dbc2vss:
+    signal: SW_CruiseEnable
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseSet:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise set switch engaged.
+  dbc2vss:
+    signal: SW_CruiseSet
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseResume:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise resume switch engaged.
+  dbc2vss:
+    signal: SW_CruiseResume
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseCancel:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise cancel switch engaged.
+  dbc2vss:
+    signal: SW_CruiseCancel
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseLimit:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise limit switch engaged.
+  dbc2vss:
+    signal: SW_CruiseLimit
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.CruiseDistance:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel cruise distance switch engaged.
+  dbc2vss:
+    signal: SW_CruiseDistance
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.Voice:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel voice switch engaged.
+  dbc2vss:
+    signal: SW_Voice
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.PhoneCall:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel phone call switch engaged.
+  dbc2vss:
+    signal: SW_PhoneCall
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.PhoneHangup:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel phone hangup switch engaged.
+  dbc2vss:
+    signal: SW_PhoneHangup
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.Horn:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel horn switch engaged.
+  dbc2vss:
+    signal: SW_Horn
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
+
+Vehicle.Cabin.SteeringWheel.Switches.LaneDepartureWarning:
+  datatype: boolean
+  type: sensor
+  description: Steering wheel lane departure warning switch engaged.
+  dbc2vss:
+    signal: SW_LaneDepartureWarning
+    on_change: true
+    transform:
+      mapping:
+        - from: 0
+          to: false
+        - from: 1
+          to: true
diff --git a/recipes-connectivity/vss/vss-agl_4.0.bb b/recipes-connectivity/vss/vss-agl_4.0.bb
index 83fb4b1a1..00d83a7a5 100644
--- a/recipes-connectivity/vss/vss-agl_4.0.bb
+++ b/recipes-connectivity/vss/vss-agl_4.0.bb
@@ -8,29 +8,58 @@ inherit allarch update-alternatives
 
 require vss.inc
 
-SRC_URI += "file://agl_vss_overlay.vspec"
-
+SRC_URI += "file://agl_vss_overlay.vspec \
+            file://agl_vss_overlay.vspec.control-panel \
+            file://agl_vss_overlay.vspec.gw-control-panel \
+            file://agl_vss_overlay.vspec.gw-hardware \
+"
 # Since we're not relying on the simple upstream repo Makefile, use
 # best practices and output into a separate directory.
 B = "${WORKDIR}/build"
 
 do_configure[noexec] = "1"
 
-VSPEC2JSON_OPTS = "-e dbc -o ${WORKDIR}/agl_vss_overlay.vspec --no-uuid --json-pretty"
+#VSPEC2JSON_OPTS = "-e dbc2vss,vss2dbc -o ${WORKDIR}/agl_vss_overlay.vspec --no-uuid --json-pretty"
+VSPEC2JSON_OPTS = "-e dbc2vss,vss2dbc --no-uuid --json-pretty"
 
 do_compile() {
-    vspec2json.py -I ${S}/spec ${VSPEC2JSON_OPTS} -u ${S}/spec/units.yaml ${S}/spec/VehicleSignalSpecification.vspec vss_rel_${PV}-agl.json
+    vspec2json.py -I ${S}/spec ${VSPEC2JSON_OPTS} -o ${WORKDIR}/agl_vss_overlay.vspec -u ${S}/spec/units.yaml ${S}/spec/VehicleSignalSpecification.vspec vss_rel_${PV}-agl.json
+    vspec2json.py -I ${S}/spec ${VSPEC2JSON_OPTS} -o ${WORKDIR}/agl_vss_overlay.vspec.control-panel -u ${S}/spec/units.yaml ${S}/spec/VehicleSignalSpecification.vspec vss_rel_${PV}-agl-control-panel.json
+    vspec2json.py -I ${S}/spec ${VSPEC2JSON_OPTS} -o ${WORKDIR}/agl_vss_overlay.vspec.gw-control-panel -u ${S}/spec/units.yaml ${S}/spec/VehicleSignalSpecification.vspec vss_rel_${PV}-agl-gw-control-panel.json
+    vspec2json.py -I ${S}/spec ${VSPEC2JSON_OPTS} -o ${WORKDIR}/agl_vss_overlay.vspec.gw-hardware -u ${S}/spec/units.yaml ${S}/spec/VehicleSignalSpecification.vspec vss_rel_${PV}-agl-gw-hardware.json
 }
 
 do_install() {
     install -d ${D}${datadir}/vss
     install -m 0644 vss_rel_${PV}-agl.json ${D}${datadir}/vss/
+    install -m 0644 vss_rel_${PV}-agl-control-panel.json ${D}${datadir}/vss/
+    install -m 0644 vss_rel_${PV}-agl-gw-control-panel.json ${D}${datadir}/vss/
+    install -m 0644 vss_rel_${PV}-agl-gw-hardware.json ${D}${datadir}/vss/
 }
 
+PACKAGE_BEFORE_PN += "${PN}-control-panel ${PN}-gw-control-panel ${PN}-gw-hardware"
+
 ALTERNATIVE_LINK_NAME[vss.json] = "${datadir}/vss/vss.json"
 
-ALTERNATIVE_PRIORITY = "20"
 ALTERNATIVE:${PN} = "vss.json"
 ALTERNATIVE_TARGET_${PN} = "${datadir}/vss/vss_rel_${PV}-agl.json"
+ALTERNATIVE_PRIORITY_${PN} = "20"
+FILES:${PN} += "${datadir}/vss/vss_rel_${PV}-agl.json"
+
+ALTERNATIVE:${PN}-control-panel = "vss.json"
+ALTERNATIVE_TARGET_${PN}-control-panel = "${datadir}/vss/vss_rel_${PV}-agl-control-panel.json"
+ALTERNATIVE_PRIORITY_${PN}-control-panel = "30"
+FILES:${PN}-control-panel += "${datadir}/vss/vss_rel_${PV}-agl-control-panel.json"
+
+ALTERNATIVE:${PN}-gw-hardware = "vss.json"
+ALTERNATIVE_TARGET_${PN}-gw-hardware = "${datadir}/vss/vss_rel_${PV}-agl-gw-hardware.json"
+ALTERNATIVE_PRIORITY_${PN}-gw-hardware = "31"
+FILES:${PN}-gw-hardware += "${datadir}/vss/vss_rel_${PV}-agl-gw-hardware.json"
 
-FILES:${PN} += "${datadir}/vss/"
+# Higher priority than gw-hardware, as we want it to be the default
+# if both are installed (as is the case with the full gateway demo
+# setup).
+ALTERNATIVE:${PN}-gw-control-panel = "vss.json"
+ALTERNATIVE_TARGET_${PN}-gw-control-panel = "${datadir}/vss/vss_rel_${PV}-agl-gw-control-panel.json"
+ALTERNATIVE_PRIORITY_${PN}-gw-control-panel = "32"
+FILES:${PN}-gw-control-panel += "${datadir}/vss/vss_rel_${PV}-agl-gw-control-panel.json"