Merge branch 'master' of ssh://gerrit.automotivelinux.org:29418/AGL/meta-agl-demo into albacore

Change-Id: Ieedfdda7a1be86c626c6f67b57fed05adb628a87
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>

11 files changed, 2750 insertions, 0 deletions

diff --git a/recipes-kernel/hdm-dim2/files/COPYING b/recipes-kernel/hdm-dim2/files/COPYING
new file mode 100644
index 000000000..6d45519c8
--- /dev/null
+++ b/recipes-kernel/hdm-dim2/files/COPYING
@@ -0,0 +1,340 @@
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+                       51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	    How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) year name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Library General
+Public License instead of this License.
diff --git a/recipes-kernel/hdm-dim2/files/Makefile b/recipes-kernel/hdm-dim2/files/Makefile
new file mode 100644
index 000000000..a9dc62ab0
--- /dev/null
+++ b/recipes-kernel/hdm-dim2/files/Makefile
@@ -0,0 +1,18 @@
+# Makefile
+#
+
+SRC := $(shell pwd)
+
+obj-m += hdm_dim2.o
+hdm_dim2-y := dim2_hdm.o dim2_hal.o dim2_sysfs.o
+CFLAGS_dim2_hdm.o := -I$(src)/../../mostcore/files -I$(src)/../../aim-network/files
+
+all:
+	$(MAKE) -C $(KERNEL_SRC) M=$(SRC) modules
+
+modules_install:
+	$(MAKE) -C $(KERNEL_SRC) M=$(SRC) modules_install
+
+clean:
+	$(MAKE) -C $(KERNEL_SRC) M=$(SRC) clean
+
diff --git a/recipes-kernel/hdm-dim2/files/dim2_errors.h b/recipes-kernel/hdm-dim2/files/dim2_errors.h
new file mode 100644
index 000000000..5a713df1d
--- /dev/null
+++ b/recipes-kernel/hdm-dim2/files/dim2_errors.h
@@ -0,0 +1,65 @@
+/*
+ * dim2_errors.h - Definitions of errors for DIM2 HAL API
+ * (MediaLB, Device Interface Macro IP, OS62420)
+ *
+ * Copyright (C) 2015, Microchip Technology Germany II GmbH & Co. KG
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This file is licensed under GPLv2.
+ */
+
+#ifndef _MOST_DIM_ERRORS_H
+#define _MOST_DIM_ERRORS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * MOST DIM errors.
+ */
+enum dim_errors_t {
+	/** Not an error */
+	DIM_NO_ERROR = 0,
+
+	/** Bad base address for DIM2 IP */
+	DIM_INIT_ERR_DIM_ADDR = 0x10,
+
+	/**< Bad MediaLB clock */
+	DIM_INIT_ERR_MLB_CLOCK,
+
+	/** Bad channel address */
+	DIM_INIT_ERR_CHANNEL_ADDRESS,
+
+	/** Out of DBR memory */
+	DIM_INIT_ERR_OUT_OF_MEMORY,
+
+	/** DIM API is called while DIM is not initialized successfully */
+	DIM_ERR_DRIVER_NOT_INITIALIZED = 0x20,
+
+	/**
+	 * Configuration does not respect hardware limitations
+	 * for isochronous or synchronous channels
+	 */
+	DIM_ERR_BAD_CONFIG,
+
+	/**
+	 * Buffer size does not respect hardware limitations
+	 * for isochronous or synchronous channels
+	 */
+	DIM_ERR_BAD_BUFFER_SIZE,
+
+	DIM_ERR_UNDERFLOW,
+
+	DIM_ERR_OVERFLOW,
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _MOST_DIM_ERRORS_H */
diff --git a/recipes-kernel/hdm-dim2/files/dim2_hal.c b/recipes-kernel/hdm-dim2/files/dim2_hal.c
new file mode 100644
index 000000000..172257596
--- /dev/null
+++ b/recipes-kernel/hdm-dim2/files/dim2_hal.c
@@ -0,0 +1,894 @@
+/*
+ * dim2_hal.c - DIM2 HAL implementation
+ * (MediaLB, Device Interface Macro IP, OS62420)
+ *
+ * Copyright (C) 2015, Microchip Technology Germany II GmbH & Co. KG
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This file is licensed under GPLv2.
+ */
+
+/* Author: Andrey Shvetsov <andrey.shvetsov@k2l.de> */
+
+#include "dim2_hal.h"
+#include "dim2_errors.h"
+#include "dim2_reg.h"
+#include <linux/stddef.h>
+
+/*
+ * The number of frames per sub-buffer for synchronous channels.
+ * Allowed values: 1, 2, 4, 8, 16, 32, 64.
+ */
+#define FRAMES_PER_SUBBUFF 16
+
+/*
+ * Size factor for synchronous DBR buffer.
+ * Minimal value is 4*FRAMES_PER_SUBBUFF.
+ */
+#define SYNC_DBR_FACTOR (4u * (u16)FRAMES_PER_SUBBUFF)
+
+/*
+ * Size factor for isochronous DBR buffer.
+ * Minimal value is 3.
+ */
+#define ISOC_DBR_FACTOR 3u
+
+/*
+ * Number of 32-bit units for DBR map.
+ *
+ * 1: block size is 512, max allocation is 16K
+ * 2: block size is 256, max allocation is 8K
+ * 4: block size is 128, max allocation is 4K
+ * 8: block size is 64, max allocation is 2K
+ *
+ * Min allocated space is block size.
+ * Max possible allocated space is 32 blocks.
+ */
+#define DBR_MAP_SIZE 2
+
+/* -------------------------------------------------------------------------- */
+/* not configurable area */
+
+#define CDT 0x00
+#define ADT 0x40
+#define MLB_CAT 0x80
+#define AHB_CAT 0x88
+
+#define DBR_SIZE  (16 * 1024) /* specified by IP */
+#define DBR_BLOCK_SIZE  (DBR_SIZE / 32 / DBR_MAP_SIZE)
+
+/* -------------------------------------------------------------------------- */
+/* generic helper functions and macros */
+
+#define MLBC0_FCNT_VAL_MACRO(n) MLBC0_FCNT_VAL_ ## n ## FPSB
+#define MLBC0_FCNT_VAL(fpsb) MLBC0_FCNT_VAL_MACRO(fpsb)
+
+static inline u32 bit_mask(u8 position)
+{
+	return (u32)1 << position;
+}
+
+static inline bool dim_on_error(u8 error_id, const char *error_message)
+{
+	dimcb_on_error(error_id, error_message);
+	return false;
+}
+
+/* -------------------------------------------------------------------------- */
+/* types and local variables */
+
+struct lld_global_vars_t {
+	bool dim_is_initialized;
+	bool mcm_is_initialized;
+	struct dim2_regs *dim2; /* DIM2 core base address */
+	u32 dbr_map[DBR_MAP_SIZE];
+};
+
+static struct lld_global_vars_t g = { false };
+
+/* -------------------------------------------------------------------------- */
+
+static int dbr_get_mask_size(u16 size)
+{
+	int i;
+
+	for (i = 0; i < 6; i++)
+		if (size <= (DBR_BLOCK_SIZE << i))
+			return 1 << i;
+	return 0;
+}
+
+/**
+ * Allocates DBR memory.
+ * @param size Allocating memory size.
+ * @return Offset in DBR memory by success or DBR_SIZE if out of memory.
+ */
+static int alloc_dbr(u16 size)
+{
+	int mask_size;
+	int i, block_idx = 0;
+
+	if (size <= 0)
+		return DBR_SIZE; /* out of memory */
+
+	mask_size = dbr_get_mask_size(size);
+	if (mask_size == 0)
+		return DBR_SIZE; /* out of memory */
+
+	for (i = 0; i < DBR_MAP_SIZE; i++) {
+		u32 const blocks = (size + DBR_BLOCK_SIZE - 1) / DBR_BLOCK_SIZE;
+		u32 mask = ~((~(u32)0) << blocks);
+
+		do {
+			if ((g.dbr_map[i] & mask) == 0) {
+				g.dbr_map[i] |= mask;
+				return block_idx * DBR_BLOCK_SIZE;
+			}
+			block_idx += mask_size;
+			/* do shift left with 2 steps in case mask_size == 32 */
+			mask <<= mask_size - 1;
+		} while ((mask <<= 1) != 0);
+	}
+
+	return DBR_SIZE; /* out of memory */
+}
+
+static void free_dbr(int offs, int size)
+{
+	int block_idx = offs / DBR_BLOCK_SIZE;
+	u32 const blocks = (size + DBR_BLOCK_SIZE - 1) / DBR_BLOCK_SIZE;
+	u32 mask = ~((~(u32)0) << blocks);
+
+	mask <<= block_idx % 32;
+	g.dbr_map[block_idx / 32] &= ~mask;
+}
+
+/* -------------------------------------------------------------------------- */
+
+static u32 dim2_read_ctr(u32 ctr_addr, u16 mdat_idx)
+{
+	dimcb_io_write(&g.dim2->MADR, ctr_addr);
+
+	/* wait till transfer is completed */
+	while ((dimcb_io_read(&g.dim2->MCTL) & 1) != 1)
+		continue;
+
+	dimcb_io_write(&g.dim2->MCTL, 0);   /* clear transfer complete */
+
+	return dimcb_io_read((&g.dim2->MDAT0) + mdat_idx);
+}
+
+static void dim2_write_ctr_mask(u32 ctr_addr, const u32 *mask, const u32 *value)
+{
+	enum { MADR_WNR_BIT = 31 };
+
+	dimcb_io_write(&g.dim2->MCTL, 0);   /* clear transfer complete */
+
+	if (mask[0] != 0)
+		dimcb_io_write(&g.dim2->MDAT0, value[0]);
+	if (mask[1] != 0)
+		dimcb_io_write(&g.dim2->MDAT1, value[1]);
+	if (mask[2] != 0)
+		dimcb_io_write(&g.dim2->MDAT2, value[2]);
+	if (mask[3] != 0)
+		dimcb_io_write(&g.dim2->MDAT3, value[3]);
+
+	dimcb_io_write(&g.dim2->MDWE0, mask[0]);
+	dimcb_io_write(&g.dim2->MDWE1, mask[1]);
+	dimcb_io_write(&g.dim2->MDWE2, mask[2]);
+	dimcb_io_write(&g.dim2->MDWE3, mask[3]);
+
+	dimcb_io_write(&g.dim2->MADR, bit_mask(MADR_WNR_BIT) | ctr_addr);
+
+	/* wait till transfer is completed */
+	while ((dimcb_io_read(&g.dim2->MCTL) & 1) != 1)
+		continue;
+
+	dimcb_io_write(&g.dim2->MCTL, 0);   /* clear transfer complete */
+}
+
+static inline void dim2_write_ctr(u32 ctr_addr, const u32 *value)
+{
+	u32 const mask[4] = { 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF };
+
+	dim2_write_ctr_mask(ctr_addr, mask, value);
+}
+
+static inline void dim2_clear_ctr(u32 ctr_addr)
+{
+	u32 const value[4] = { 0, 0, 0, 0 };
+
+	dim2_write_ctr(ctr_addr, value);
+}
+
+static void dim2_configure_cat(u8 cat_base, u8 ch_addr, u8 ch_type,
+			       bool read_not_write, bool sync_mfe)
+{
+	u16 const cat =
+		(read_not_write << CAT_RNW_BIT) |
+		(ch_type << CAT_CT_SHIFT) |
+		(ch_addr << CAT_CL_SHIFT) |
+		(sync_mfe << CAT_MFE_BIT) |
+		(false << CAT_MT_BIT) |
+		(true << CAT_CE_BIT);
+	u8 const ctr_addr = cat_base + ch_addr / 8;
+	u8 const idx = (ch_addr % 8) / 2;
+	u8 const shift = (ch_addr % 2) * 16;
+	u32 mask[4] = { 0, 0, 0, 0 };
+	u32 value[4] = { 0, 0, 0, 0 };
+
+	mask[idx] = (u32)0xFFFF << shift;
+	value[idx] = cat << shift;
+	dim2_write_ctr_mask(ctr_addr, mask, value);
+}
+
+static void dim2_clear_cat(u8 cat_base, u8 ch_addr)
+{
+	u8 const ctr_addr = cat_base + ch_addr / 8;
+	u8 const idx = (ch_addr % 8) / 2;
+	u8 const shift = (ch_addr % 2) * 16;
+	u32 mask[4] = { 0, 0, 0, 0 };
+	u32 value[4] = { 0, 0, 0, 0 };
+
+	mask[idx] = (u32)0xFFFF << shift;
+	dim2_write_ctr_mask(ctr_addr, mask, value);
+}
+
+static void dim2_configure_cdt(u8 ch_addr, u16 dbr_address, u16 hw_buffer_size,
+			       u16 packet_length)
+{
+	u32 cdt[4] = { 0, 0, 0, 0 };
+
+	if (packet_length)
+		cdt[1] = ((packet_length - 1) << CDT1_BS_ISOC_SHIFT);
+
+	cdt[3] =
+		((hw_buffer_size - 1) << CDT3_BD_SHIFT) |
+		(dbr_address << CDT3_BA_SHIFT);
+	dim2_write_ctr(CDT + ch_addr, cdt);
+}
+
+static void dim2_clear_cdt(u8 ch_addr)
+{
+	u32 cdt[4] = { 0, 0, 0, 0 };
+
+	dim2_write_ctr(CDT + ch_addr, cdt);
+}
+
+static void dim2_configure_adt(u8 ch_addr)
+{
+	u32 adt[4] = { 0, 0, 0, 0 };
+
+	adt[0] =
+		(true << ADT0_CE_BIT) |
+		(true << ADT0_LE_BIT) |
+		(0 << ADT0_PG_BIT);
+
+	dim2_write_ctr(ADT + ch_addr, adt);
+}
+
+static void dim2_clear_adt(u8 ch_addr)
+{
+	u32 adt[4] = { 0, 0, 0, 0 };
+
+	dim2_write_ctr(ADT + ch_addr, adt);
+}
+
+static void dim2_start_ctrl_async(u8 ch_addr, u8 idx, u32 buf_addr,
+				  u16 buffer_size)
+{
+	u8 const shift = idx * 16;
+
+	u32 mask[4] = { 0, 0, 0, 0 };
+	u32 adt[4] = { 0, 0, 0, 0 };
+
+	mask[1] =
+		bit_mask(ADT1_PS_BIT + shift) |
+		bit_mask(ADT1_RDY_BIT + shift) |
+		(ADT1_CTRL_ASYNC_BD_MASK << (ADT1_BD_SHIFT + shift));
+	adt[1] =
+		(true << (ADT1_PS_BIT + shift)) |
+		(true << (ADT1_RDY_BIT + shift)) |
+		((buffer_size - 1) << (ADT1_BD_SHIFT + shift));
+
+	mask[idx + 2] = 0xFFFFFFFF;
+	adt[idx + 2] = buf_addr;
+
+	dim2_write_ctr_mask(ADT + ch_addr, mask, adt);
+}
+
+static void dim2_start_isoc_sync(u8 ch_addr, u8 idx, u32 buf_addr,
+				 u16 buffer_size)
+{
+	u8 const shift = idx * 16;
+
+	u32 mask[4] = { 0, 0, 0, 0 };
+	u32 adt[4] = { 0, 0, 0, 0 };
+
+	mask[1] =
+		bit_mask(ADT1_RDY_BIT + shift) |
+		(ADT1_ISOC_SYNC_BD_MASK << (ADT1_BD_SHIFT + shift));
+	adt[1] =
+		(true << (ADT1_RDY_BIT + shift)) |
+		((buffer_size - 1) << (ADT1_BD_SHIFT + shift));
+
+	mask[idx + 2] = 0xFFFFFFFF;
+	adt[idx + 2] = buf_addr;
+
+	dim2_write_ctr_mask(ADT + ch_addr, mask, adt);
+}
+
+static void dim2_clear_ctram(void)
+{
+	u32 ctr_addr;
+
+	for (ctr_addr = 0; ctr_addr < 0x90; ctr_addr++)
+		dim2_clear_ctr(ctr_addr);
+}
+
+static void dim2_configure_channel(
+	u8 ch_addr, u8 type, u8 is_tx, u16 dbr_address, u16 hw_buffer_size,
+	u16 packet_length, bool sync_mfe)
+{
+	dim2_configure_cdt(ch_addr, dbr_address, hw_buffer_size, packet_length);
+	dim2_configure_cat(MLB_CAT, ch_addr, type, is_tx ? 1 : 0, sync_mfe);
+
+	dim2_configure_adt(ch_addr);
+	dim2_configure_cat(AHB_CAT, ch_addr, type, is_tx ? 0 : 1, sync_mfe);
+
+	/* unmask interrupt for used channel, enable mlb_sys_int[0] interrupt */
+	dimcb_io_write(&g.dim2->ACMR0,
+		       dimcb_io_read(&g.dim2->ACMR0) | bit_mask(ch_addr));
+}
+
+static void dim2_clear_channel(u8 ch_addr)
+{
+	/* mask interrupt for used channel, disable mlb_sys_int[0] interrupt */
+	dimcb_io_write(&g.dim2->ACMR0,
+		       dimcb_io_read(&g.dim2->ACMR0) & ~bit_mask(ch_addr));
+
+	dim2_clear_cat(AHB_CAT, ch_addr);
+	dim2_clear_adt(ch_addr);
+
+	dim2_clear_cat(MLB_CAT, ch_addr);
+	dim2_clear_cdt(ch_addr);
+}
+
+/* -------------------------------------------------------------------------- */
+/* channel state helpers */
+
+static void state_init(struct int_ch_state *state)
+{
+	state->request_counter = 0;
+	state->service_counter = 0;
+
+	state->idx1 = 0;
+	state->idx2 = 0;
+	state->level = 0;
+}
+
+/* -------------------------------------------------------------------------- */
+/* macro helper functions */
+
+static inline bool check_channel_address(u32 ch_address)
+{
+	return ch_address > 0 && (ch_address % 2) == 0 &&
+	       (ch_address / 2) <= (u32)CAT_CL_MASK;
+}
+
+static inline bool check_packet_length(u32 packet_length)
+{
+	u16 const max_size = ((u16)CDT3_BD_ISOC_MASK + 1u) / ISOC_DBR_FACTOR;
+
+	if (packet_length <= 0)
+		return false; /* too small */
+
+	if (packet_length > max_size)
+		return false; /* too big */
+
+	if (packet_length - 1u > (u32)CDT1_BS_ISOC_MASK)
+		return false; /* too big */
+
+	return true;
+}
+
+static inline bool check_bytes_per_frame(u32 bytes_per_frame)
+{
+	u16 const max_size = ((u16)CDT3_BD_MASK + 1u) / SYNC_DBR_FACTOR;
+
+	if (bytes_per_frame <= 0)
+		return false; /* too small */
+
+	if (bytes_per_frame > max_size)
+		return false; /* too big */
+
+	return true;
+}
+
+static inline u16 norm_ctrl_async_buffer_size(u16 buf_size)
+{
+	u16 const max_size = (u16)ADT1_CTRL_ASYNC_BD_MASK + 1u;
+
+	if (buf_size > max_size)
+		return max_size;
+
+	return buf_size;
+}
+
+static inline u16 norm_isoc_buffer_size(u16 buf_size, u16 packet_length)
+{
+	u16 n;
+	u16 const max_size = (u16)ADT1_ISOC_SYNC_BD_MASK + 1u;
+
+	if (buf_size > max_size)
+		buf_size = max_size;
+
+	n = buf_size / packet_length;
+
+	if (n < 2u)
+		return 0; /* too small buffer for given packet_length */
+
+	return packet_length * n;
+}
+
+static inline u16 norm_sync_buffer_size(u16 buf_size, u16 bytes_per_frame)
+{
+	u16 n;
+	u16 const max_size = (u16)ADT1_ISOC_SYNC_BD_MASK + 1u;
+	u32 const unit = bytes_per_frame * (u16)FRAMES_PER_SUBBUFF;
+
+	if (buf_size > max_size)
+		buf_size = max_size;
+
+	n = buf_size / unit;
+
+	if (n < 1u)
+		return 0; /* too small buffer for given bytes_per_frame */
+
+	return unit * n;
+}
+
+static void dim2_cleanup(void)
+{
+	/* disable MediaLB */
+	dimcb_io_write(&g.dim2->MLBC0, false << MLBC0_MLBEN_BIT);
+
+	dim2_clear_ctram();
+
+	/* disable mlb_int interrupt */
+	dimcb_io_write(&g.dim2->MIEN, 0);
+
+	/* clear status for all dma channels */
+	dimcb_io_write(&g.dim2->ACSR0, 0xFFFFFFFF);
+	dimcb_io_write(&g.dim2->ACSR1, 0xFFFFFFFF);
+
+	/* mask interrupts for all channels */
+	dimcb_io_write(&g.dim2->ACMR0, 0);
+	dimcb_io_write(&g.dim2->ACMR1, 0);
+}
+
+static void dim2_initialize(bool enable_6pin, u8 mlb_clock)
+{
+	dim2_cleanup();
+
+	/* configure and enable MediaLB */
+	dimcb_io_write(&g.dim2->MLBC0,
+		       enable_6pin << MLBC0_MLBPEN_BIT |
+		       mlb_clock << MLBC0_MLBCLK_SHIFT |
+		       MLBC0_FCNT_VAL(FRAMES_PER_SUBBUFF) << MLBC0_FCNT_SHIFT |
+		       true << MLBC0_MLBEN_BIT);
+
+	/* activate all HBI channels */
+	dimcb_io_write(&g.dim2->HCMR0, 0xFFFFFFFF);
+	dimcb_io_write(&g.dim2->HCMR1, 0xFFFFFFFF);
+
+	/* enable HBI */
+	dimcb_io_write(&g.dim2->HCTL, bit_mask(HCTL_EN_BIT));
+
+	/* configure DMA */
+	dimcb_io_write(&g.dim2->ACTL,
+		       ACTL_DMA_MODE_VAL_DMA_MODE_1 << ACTL_DMA_MODE_BIT |
+		       true << ACTL_SCE_BIT);
+}
+
+static bool dim2_is_mlb_locked(void)
+{
+	u32 const mask0 = bit_mask(MLBC0_MLBLK_BIT);
+	u32 const mask1 = bit_mask(MLBC1_CLKMERR_BIT) |
+			  bit_mask(MLBC1_LOCKERR_BIT);
+	u32 const c1 = dimcb_io_read(&g.dim2->MLBC1);
+	u32 const nda_mask = (u32)MLBC1_NDA_MASK << MLBC1_NDA_SHIFT;
+
+	dimcb_io_write(&g.dim2->MLBC1, c1 & nda_mask);
+	return (dimcb_io_read(&g.dim2->MLBC1) & mask1) == 0 &&
+	       (dimcb_io_read(&g.dim2->MLBC0) & mask0) != 0;
+}
+
+/* -------------------------------------------------------------------------- */
+/* channel help routines */
+
+static inline bool service_channel(u8 ch_addr, u8 idx)
+{
+	u8 const shift = idx * 16;
+	u32 const adt1 = dim2_read_ctr(ADT + ch_addr, 1);
+
+	if (((adt1 >> (ADT1_DNE_BIT + shift)) & 1) == 0)
+		return false;
+
+	{
+		u32 mask[4] = { 0, 0, 0, 0 };
+		u32 adt_w[4] = { 0, 0, 0, 0 };
+
+		mask[1] =
+			bit_mask(ADT1_DNE_BIT + shift) |
+			bit_mask(ADT1_ERR_BIT + shift) |
+			bit_mask(ADT1_RDY_BIT + shift);
+		dim2_write_ctr_mask(ADT + ch_addr, mask, adt_w);
+	}
+
+	/* clear channel status bit */
+	dimcb_io_write(&g.dim2->ACSR0, bit_mask(ch_addr));
+
+	return true;
+}
+
+/* -------------------------------------------------------------------------- */
+/* channel init routines */
+
+static void isoc_init(struct dim_channel *ch, u8 ch_addr, u16 packet_length)
+{
+	state_init(&ch->state);
+
+	ch->addr = ch_addr;
+
+	ch->packet_length = packet_length;
+	ch->bytes_per_frame = 0;
+	ch->done_sw_buffers_number = 0;
+}
+
+static void sync_init(struct dim_channel *ch, u8 ch_addr, u16 bytes_per_frame)
+{
+	state_init(&ch->state);
+
+	ch->addr = ch_addr;
+
+	ch->packet_length = 0;
+	ch->bytes_per_frame = bytes_per_frame;
+	ch->done_sw_buffers_number = 0;
+}
+
+static void channel_init(struct dim_channel *ch, u8 ch_addr)
+{
+	state_init(&ch->state);
+
+	ch->addr = ch_addr;
+
+	ch->packet_length = 0;
+	ch->bytes_per_frame = 0;
+	ch->done_sw_buffers_number = 0;
+}
+
+/* returns true if channel interrupt state is cleared */
+static bool channel_service_interrupt(struct dim_channel *ch)
+{
+	struct int_ch_state *const state = &ch->state;
+
+	if (!service_channel(ch->addr, state->idx2))
+		return false;
+
+	state->idx2 ^= 1;
+	state->request_counter++;
+	return true;
+}
+
+static bool channel_start(struct dim_channel *ch, u32 buf_addr, u16 buf_size)
+{
+	struct int_ch_state *const state = &ch->state;
+
+	if (buf_size <= 0)
+		return dim_on_error(DIM_ERR_BAD_BUFFER_SIZE, "Bad buffer size");
+
+	if (ch->packet_length == 0 && ch->bytes_per_frame == 0 &&
+	    buf_size != norm_ctrl_async_buffer_size(buf_size))
+		return dim_on_error(DIM_ERR_BAD_BUFFER_SIZE,
+				    "Bad control/async buffer size");
+
+	if (ch->packet_length &&
+	    buf_size != norm_isoc_buffer_size(buf_size, ch->packet_length))
+		return dim_on_error(DIM_ERR_BAD_BUFFER_SIZE,
+				    "Bad isochronous buffer size");
+
+	if (ch->bytes_per_frame &&
+	    buf_size != norm_sync_buffer_size(buf_size, ch->bytes_per_frame))
+		return dim_on_error(DIM_ERR_BAD_BUFFER_SIZE,
+				    "Bad synchronous buffer size");
+
+	if (state->level >= 2u)
+		return dim_on_error(DIM_ERR_OVERFLOW, "Channel overflow");
+
+	++state->level;
+
+	if (ch->packet_length || ch->bytes_per_frame)
+		dim2_start_isoc_sync(ch->addr, state->idx1, buf_addr, buf_size);
+	else
+		dim2_start_ctrl_async(ch->addr, state->idx1, buf_addr,
+				      buf_size);
+	state->idx1 ^= 1;
+
+	return true;
+}
+
+static u8 channel_service(struct dim_channel *ch)
+{
+	struct int_ch_state *const state = &ch->state;
+
+	if (state->service_counter != state->request_counter) {
+		state->service_counter++;
+		if (state->level == 0)
+			return DIM_ERR_UNDERFLOW;
+
+		--state->level;
+		ch->done_sw_buffers_number++;
+	}
+
+	return DIM_NO_ERROR;
+}
+
+static bool channel_detach_buffers(struct dim_channel *ch, u16 buffers_number)
+{
+	if (buffers_number > ch->done_sw_buffers_number)
+		return dim_on_error(DIM_ERR_UNDERFLOW, "Channel underflow");
+
+	ch->done_sw_buffers_number -= buffers_number;
+	return true;
+}
+
+/* -------------------------------------------------------------------------- */
+/* API */
+
+u8 dim_startup(void *dim_base_address, u32 mlb_clock)
+{
+	g.dim_is_initialized = false;
+
+	if (!dim_base_address)
+		return DIM_INIT_ERR_DIM_ADDR;
+
+	/* MediaLB clock: 0 - 256 fs, 1 - 512 fs, 2 - 1024 fs, 3 - 2048 fs */
+	/* MediaLB clock: 4 - 3072 fs, 5 - 4096 fs, 6 - 6144 fs, 7 - 8192 fs */
+	if (mlb_clock >= 8)
+		return DIM_INIT_ERR_MLB_CLOCK;
+
+	g.dim2 = dim_base_address;
+	g.dbr_map[0] = 0;
+	g.dbr_map[1] = 0;
+
+	dim2_initialize(mlb_clock >= 3, mlb_clock);
+
+	g.dim_is_initialized = true;
+
+	return DIM_NO_ERROR;
+}
+
+void dim_shutdown(void)
+{
+	g.dim_is_initialized = false;
+	dim2_cleanup();
+}
+
+bool dim_get_lock_state(void)
+{
+	return dim2_is_mlb_locked();
+}
+
+static u8 init_ctrl_async(struct dim_channel *ch, u8 type, u8 is_tx,
+			  u16 ch_address, u16 hw_buffer_size)
+{
+	if (!g.dim_is_initialized || !ch)
+		return DIM_ERR_DRIVER_NOT_INITIALIZED;
+
+	if (!check_channel_address(ch_address))
+		return DIM_INIT_ERR_CHANNEL_ADDRESS;
+
+	ch->dbr_size = hw_buffer_size;
+	ch->dbr_addr = alloc_dbr(ch->dbr_size);
+	if (ch->dbr_addr >= DBR_SIZE)
+		return DIM_INIT_ERR_OUT_OF_MEMORY;
+
+	channel_init(ch, ch_address / 2);
+
+	dim2_configure_channel(ch->addr, type, is_tx,
+			       ch->dbr_addr, ch->dbr_size, 0, false);
+
+	return DIM_NO_ERROR;
+}
+
+u16 dim_norm_ctrl_async_buffer_size(u16 buf_size)
+{
+	return norm_ctrl_async_buffer_size(buf_size);
+}
+
+/**
+ * Retrieves maximal possible correct buffer size for isochronous data type
+ * conform to given packet length and not bigger than given buffer size.
+ *
+ * Returns non-zero correct buffer size or zero by error.
+ */
+u16 dim_norm_isoc_buffer_size(u16 buf_size, u16 packet_length)
+{
+	if (!check_packet_length(packet_length))
+		return 0;
+
+	return norm_isoc_buffer_size(buf_size, packet_length);
+}
+
+/**
+ * Retrieves maximal possible correct buffer size for synchronous data type
+ * conform to given bytes per frame and not bigger than given buffer size.
+ *
+ * Returns non-zero correct buffer size or zero by error.
+ */
+u16 dim_norm_sync_buffer_size(u16 buf_size, u16 bytes_per_frame)
+{
+	if (!check_bytes_per_frame(bytes_per_frame))
+		return 0;
+
+	return norm_sync_buffer_size(buf_size, bytes_per_frame);
+}
+
+u8 dim_init_control(struct dim_channel *ch, u8 is_tx, u16 ch_address,
+		    u16 max_buffer_size)
+{
+	return init_ctrl_async(ch, CAT_CT_VAL_CONTROL, is_tx, ch_address,
+			       max_buffer_size);
+}
+
+u8 dim_init_async(struct dim_channel *ch, u8 is_tx, u16 ch_address,
+		  u16 max_buffer_size)
+{
+	return init_ctrl_async(ch, CAT_CT_VAL_ASYNC, is_tx, ch_address,
+			       max_buffer_size);
+}
+
+u8 dim_init_isoc(struct dim_channel *ch, u8 is_tx, u16 ch_address,
+		 u16 packet_length)
+{
+	if (!g.dim_is_initialized || !ch)
+		return DIM_ERR_DRIVER_NOT_INITIALIZED;
+
+	if (!check_channel_address(ch_address))
+		return DIM_INIT_ERR_CHANNEL_ADDRESS;
+
+	if (!check_packet_length(packet_length))
+		return DIM_ERR_BAD_CONFIG;
+
+	ch->dbr_size = packet_length * ISOC_DBR_FACTOR;
+	ch->dbr_addr = alloc_dbr(ch->dbr_size);
+	if (ch->dbr_addr >= DBR_SIZE)
+		return DIM_INIT_ERR_OUT_OF_MEMORY;
+
+	isoc_init(ch, ch_address / 2, packet_length);
+
+	dim2_configure_channel(ch->addr, CAT_CT_VAL_ISOC, is_tx, ch->dbr_addr,
+			       ch->dbr_size, packet_length, false);
+
+	return DIM_NO_ERROR;
+}
+
+u8 dim_init_sync(struct dim_channel *ch, u8 is_tx, u16 ch_address,
+		 u16 bytes_per_frame)
+{
+	if (!g.dim_is_initialized || !ch)
+		return DIM_ERR_DRIVER_NOT_INITIALIZED;
+
+	if (!check_channel_address(ch_address))
+		return DIM_INIT_ERR_CHANNEL_ADDRESS;
+
+	if (!check_bytes_per_frame(bytes_per_frame))
+		return DIM_ERR_BAD_CONFIG;
+
+	ch->dbr_size = bytes_per_frame * SYNC_DBR_FACTOR;
+	ch->dbr_addr = alloc_dbr(ch->dbr_size);
+	if (ch->dbr_addr >= DBR_SIZE)
+		return DIM_INIT_ERR_OUT_OF_MEMORY;
+
+	sync_init(ch, ch_address / 2, bytes_per_frame);
+
+	dim2_configure_channel(ch->addr, CAT_CT_VAL_SYNC, is_tx,
+			       ch->dbr_addr, ch->dbr_size, 0, true);
+
+	return DIM_NO_ERROR;
+}
+
+u8 dim_destroy_channel(struct dim_channel *ch)
+{
+	if (!g.dim_is_initialized || !ch)
+		return DIM_ERR_DRIVER_NOT_INITIALIZED;
+
+	dim2_clear_channel(ch->addr);
+	if (ch->dbr_addr < DBR_SIZE)
+		free_dbr(ch->dbr_addr, ch->dbr_size);
+	ch->dbr_addr = DBR_SIZE;
+
+	return DIM_NO_ERROR;
+}
+
+void dim_service_irq(struct dim_channel *const *channels)
+{
+	bool state_changed;
+
+	if (!g.dim_is_initialized) {
+		dim_on_error(DIM_ERR_DRIVER_NOT_INITIALIZED,
+			     "DIM is not initialized");
+		return;
+	}
+
+	if (!channels) {
+		dim_on_error(DIM_ERR_DRIVER_NOT_INITIALIZED, "Bad channels");
+		return;
+	}
+
+	/*
+	 * Use while-loop and a flag to make sure the age is changed back at
+	 * least once, otherwise the interrupt may never come if CPU generates
+	 * interrupt on changing age.
+	 * This cycle runs not more than number of channels, because
+	 * channel_service_interrupt() routine doesn't start the channel again.
+	 */
+	do {
+		struct dim_channel *const *ch = channels;
+
+		state_changed = false;
+
+		while (*ch) {
+			state_changed |= channel_service_interrupt(*ch);
+			++ch;
+		}
+	} while (state_changed);
+
+	/* clear pending Interrupts */
+	dimcb_io_write(&g.dim2->MS0, 0);
+	dimcb_io_write(&g.dim2->MS1, 0);
+}
+
+u8 dim_service_channel(struct dim_channel *ch)
+{
+	if (!g.dim_is_initialized || !ch)
+		return DIM_ERR_DRIVER_NOT_INITIALIZED;
+
+	return channel_service(ch);
+}
+
+struct dim_ch_state_t *dim_get_channel_state(struct dim_channel *ch,
+					     struct dim_ch_state_t *state_ptr)
+{
+	if (!ch || !state_ptr)
+		return NULL;
+
+	state_ptr->ready = ch->state.level < 2;
+	state_ptr->done_buffers = ch->done_sw_buffers_number;
+
+	return state_ptr;
+}
+
+bool dim_enqueue_buffer(struct dim_channel *ch, u32 buffer_addr,
+			u16 buffer_size)
+{
+	if (!ch)
+		return dim_on_error(DIM_ERR_DRIVER_NOT_INITIALIZED,
+				    "Bad channel");
+
+	return channel_start(ch, buffer_addr, buffer_size);
+}
+
+bool dim_detach_buffers(struct dim_channel *ch, u16 buffers_number)
+{
+	if (!ch)
+		return dim_on_error(DIM_ERR_DRIVER_NOT_INITIALIZED,
+				    "Bad channel");
+
+	return channel_detach_buffers(ch, buffers_number);
+}
diff --git a/recipes-kernel/hdm-dim2/files/dim2_hal.h b/recipes-kernel/hdm-dim2/files/dim2_hal.h
new file mode 100644
index 000000000..48cdd9c8c
--- /dev/null
+++ b/recipes-kernel/hdm-dim2/files/dim2_hal.h
@@ -0,0 +1,116 @@
+/*
+ * dim2_hal.h - DIM2 HAL interface
+ * (MediaLB, Device Interface Macro IP, OS62420)
+ *
+ * Copyright (C) 2015, Microchip Technology Germany II GmbH & Co. KG
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This file is licensed under GPLv2.
+ */
+
+#ifndef _DIM2_HAL_H
+#define _DIM2_HAL_H
+
+#include <linux/types.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * The values below are specified in the hardware specification.
+ * So, they should not be changed until the hardware specification changes.
+ */
+enum mlb_clk_speed {
+	CLK_256FS = 0,
+	CLK_512FS = 1,
+	CLK_1024FS = 2,
+	CLK_2048FS = 3,
+	CLK_3072FS = 4,
+	CLK_4096FS = 5,
+	CLK_6144FS = 6,
+	CLK_8192FS = 7,
+};
+
+struct dim_ch_state_t {
+	bool ready; /* Shows readiness to enqueue next buffer */
+	u16 done_buffers; /* Number of completed buffers */
+};
+
+typedef int atomic_counter_t;
+
+struct int_ch_state {
+	/* changed only in interrupt context */
+	volatile atomic_counter_t request_counter;
+
+	/* changed only in task context */
+	volatile atomic_counter_t service_counter;
+
+	u8 idx1;
+	u8 idx2;
+	u8 level; /* [0..2], buffering level */
+};
+
+struct dim_channel {
+	struct int_ch_state state;
+	u8 addr;
+	u16 dbr_addr;
+	u16 dbr_size;
+	u16 packet_length; /*< Isochronous packet length in bytes. */
+	u16 bytes_per_frame; /*< Synchronous bytes per frame. */
+	u16 done_sw_buffers_number; /*< Done software buffers number. */
+};
+
+u8 dim_startup(void *dim_base_address, u32 mlb_clock);
+
+void dim_shutdown(void);
+
+bool dim_get_lock_state(void);
+
+u16 dim_norm_ctrl_async_buffer_size(u16 buf_size);
+
+u16 dim_norm_isoc_buffer_size(u16 buf_size, u16 packet_length);
+
+u16 dim_norm_sync_buffer_size(u16 buf_size, u16 bytes_per_frame);
+
+u8 dim_init_control(struct dim_channel *ch, u8 is_tx, u16 ch_address,
+		    u16 max_buffer_size);
+
+u8 dim_init_async(struct dim_channel *ch, u8 is_tx, u16 ch_address,
+		  u16 max_buffer_size);
+
+u8 dim_init_isoc(struct dim_channel *ch, u8 is_tx, u16 ch_address,
+		 u16 packet_length);
+
+u8 dim_init_sync(struct dim_channel *ch, u8 is_tx, u16 ch_address,
+		 u16 bytes_per_frame);
+
+u8 dim_destroy_channel(struct dim_channel *ch);
+
+void dim_service_irq(struct dim_channel *const *channels);
+
+u8 dim_service_channel(struct dim_channel *ch);
+
+struct dim_ch_state_t *dim_get_channel_state(struct dim_channel *ch,
+					     struct dim_ch_state_t *state_ptr);
+
+bool dim_enqueue_buffer(struct dim_channel *ch, u32 buffer_addr,
+			u16 buffer_size);
+
+bool dim_detach_buffers(struct dim_channel *ch, u16 buffers_number);
+
+u32 dimcb_io_read(u32 *ptr32);
+
+void dimcb_io_write(u32 *ptr32, u32 value);
+
+void dimcb_on_error(u8 error_id, const char *error_message);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _DIM2_HAL_H */
diff --git a/recipes-kernel/hdm-dim2/files/dim2_hdm.c b/recipes-kernel/hdm-dim2/files/dim2_hdm.c
new file mode 100644
index 000000000..48ce7ab1b
--- /dev/null
+++ b/recipes-kernel/hdm-dim2/files/dim2_hdm.c
@@ -0,0 +1,933 @@
+/*
+ * dim2_hdm.c - MediaLB DIM2 Hardware Dependent Module
+ *
+ * Copyright (C) 2015, Microchip Technology Germany II GmbH & Co. KG
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This file is licensed under GPLv2.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/printk.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/sched.h>
+#include <linux/kthread.h>
+
+#include <mostcore.h>
+#include <networking.h>
+#include "dim2_hal.h"
+#include "dim2_hdm.h"
+#include "dim2_errors.h"
+#include "dim2_sysfs.h"
+
+#define DMA_CHANNELS (32 - 1)  /* channel 0 is a system channel */
+
+#define MAX_BUFFERS_PACKET      32
+#define MAX_BUFFERS_STREAMING   32
+#define MAX_BUF_SIZE_PACKET     2048
+#define MAX_BUF_SIZE_STREAMING  (8 * 1024)
+
+/* command line parameter to select clock speed */
+static char *clock_speed;
+module_param(clock_speed, charp, 0);
+MODULE_PARM_DESC(clock_speed, "MediaLB Clock Speed");
+
+/*
+ * #############################################################################
+ *
+ * The define below activates an utility function used by HAL-simu
+ * for calling DIM interrupt handler.
+ * It is used only for TEST PURPOSE and shall be commented before release.
+ *
+ * #############################################################################
+ */
+/* #define ENABLE_HDM_TEST */
+
+static DEFINE_SPINLOCK(dim_lock);
+
+static void dim2_tasklet_fn(unsigned long data);
+static DECLARE_TASKLET(dim2_tasklet, dim2_tasklet_fn, 0);
+
+/**
+ * struct hdm_channel - private structure to keep channel specific data
+ * @is_initialized: identifier to know whether the channel is initialized
+ * @ch: HAL specific channel data
+ * @pending_list: list to keep MBO's before starting transfer
+ * @started_list: list to keep MBO's after starting transfer
+ * @direction: channel direction (TX or RX)
+ * @data_type: channel data type
+ */
+struct hdm_channel {
+	char name[sizeof "caNNN"];
+	bool is_initialized;
+	struct dim_channel ch;
+	struct list_head pending_list;	/* before dim_enqueue_buffer() */
+	struct list_head started_list;	/* after dim_enqueue_buffer() */
+	enum most_channel_direction direction;
+	enum most_channel_data_type data_type;
+};
+
+/**
+ * struct dim2_hdm - private structure to keep interface specific data
+ * @hch: an array of channel specific data
+ * @most_iface: most interface structure
+ * @capabilities: an array of channel capability data
+ * @io_base: I/O register base address
+ * @irq_ahb0: dim2 AHB0 irq number
+ * @clk_speed: user selectable (through command line parameter) clock speed
+ * @netinfo_task: thread to deliver network status
+ * @netinfo_waitq: waitq for the thread to sleep
+ * @deliver_netinfo: to identify whether network status received
+ * @mac_addrs: INIC mac address
+ * @link_state: network link state
+ * @atx_idx: index of async tx channel
+ */
+struct dim2_hdm {
+	struct hdm_channel hch[DMA_CHANNELS];
+	struct most_channel_capability capabilities[DMA_CHANNELS];
+	struct most_interface most_iface;
+	char name[16 + sizeof "dim2-"];
+	void *io_base;
+	unsigned int irq_ahb0;
+	int clk_speed;
+	struct task_struct *netinfo_task;
+	wait_queue_head_t netinfo_waitq;
+	int deliver_netinfo;
+	unsigned char mac_addrs[6];
+	unsigned char link_state;
+	int atx_idx;
+	struct medialb_bus bus;
+};
+
+#define iface_to_hdm(iface) container_of(iface, struct dim2_hdm, most_iface)
+
+/* Macro to identify a network status message */
+#define PACKET_IS_NET_INFO(p)  \
+	(((p)[1] == 0x18) && ((p)[2] == 0x05) && ((p)[3] == 0x0C) && \
+	 ((p)[13] == 0x3C) && ((p)[14] == 0x00) && ((p)[15] == 0x0A))
+
+#if defined(ENABLE_HDM_TEST)
+static struct dim2_hdm *test_dev;
+#endif
+
+bool dim2_sysfs_get_state_cb(void)
+{
+	bool state;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dim_lock, flags);
+	state = dim_get_lock_state();
+	spin_unlock_irqrestore(&dim_lock, flags);
+
+	return state;
+}
+
+/**
+ * dimcb_io_read - callback from HAL to read an I/O register
+ * @ptr32: register address
+ */
+u32 dimcb_io_read(u32 *ptr32)
+{
+	return readl(ptr32);
+}
+
+/**
+ * dimcb_io_write - callback from HAL to write value to an I/O register
+ * @ptr32: register address
+ * @value: value to write
+ */
+void dimcb_io_write(u32 *ptr32, u32 value)
+{
+	writel(value, ptr32);
+}
+
+/**
+ * dimcb_on_error - callback from HAL to report miscommunication between
+ * HDM and HAL
+ * @error_id: Error ID
+ * @error_message: Error message. Some text in a free format
+ */
+void dimcb_on_error(u8 error_id, const char *error_message)
+{
+	pr_err("dimcb_on_error: error_id - %d, error_message - %s\n", error_id,
+	       error_message);
+}
+
+/**
+ * startup_dim - initialize the dim2 interface
+ * @pdev: platform device
+ *
+ * Get the value of command line parameter "clock_speed" if given or use the
+ * default value, enable the clock and PLL, and initialize the dim2 interface.
+ */
+static int startup_dim(struct platform_device *pdev)
+{
+	struct dim2_hdm *dev = platform_get_drvdata(pdev);
+	struct dim2_platform_data *pdata = pdev->dev.platform_data;
+	u8 hal_ret;
+
+	dev->clk_speed = -1;
+
+	if (clock_speed) {
+		if (!strcmp(clock_speed, "256fs"))
+			dev->clk_speed = CLK_256FS;
+		else if (!strcmp(clock_speed, "512fs"))
+			dev->clk_speed = CLK_512FS;
+		else if (!strcmp(clock_speed, "1024fs"))
+			dev->clk_speed = CLK_1024FS;
+		else if (!strcmp(clock_speed, "2048fs"))
+			dev->clk_speed = CLK_2048FS;
+		else if (!strcmp(clock_speed, "3072fs"))
+			dev->clk_speed = CLK_3072FS;
+		else if (!strcmp(clock_speed, "4096fs"))
+			dev->clk_speed = CLK_4096FS;
+		else if (!strcmp(clock_speed, "6144fs"))
+			dev->clk_speed = CLK_6144FS;
+		else if (!strcmp(clock_speed, "8192fs"))
+			dev->clk_speed = CLK_8192FS;
+	}
+
+	if (dev->clk_speed == -1) {
+		pr_info("Bad or missing clock speed parameter, using default value: 3072fs\n");
+		dev->clk_speed = CLK_3072FS;
+	} else {
+		pr_info("Selected clock speed: %s\n", clock_speed);
+	}
+	if (pdata && pdata->init) {
+		int ret = pdata->init(pdata, dev->io_base, dev->clk_speed);
+
+		if (ret)
+			return ret;
+	}
+
+	hal_ret = dim_startup(dev->io_base, dev->clk_speed);
+	if (hal_ret != DIM_NO_ERROR) {
+		pr_err("dim_startup failed: %d\n", hal_ret);
+		if (pdata && pdata->destroy)
+			pdata->destroy(pdata);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+/**
+ * try_start_dim_transfer - try to transfer a buffer on a channel
+ * @hdm_ch: channel specific data
+ *
+ * Transfer a buffer from pending_list if the channel is ready
+ */
+static int try_start_dim_transfer(struct hdm_channel *hdm_ch)
+{
+	u16 buf_size;
+	struct list_head *head = &hdm_ch->pending_list;
+	struct mbo *mbo;
+	unsigned long flags;
+	struct dim_ch_state_t st;
+
+	BUG_ON(!hdm_ch);
+	BUG_ON(!hdm_ch->is_initialized);
+
+	spin_lock_irqsave(&dim_lock, flags);
+	if (list_empty(head)) {
+		spin_unlock_irqrestore(&dim_lock, flags);
+		return -EAGAIN;
+	}
+
+	if (!dim_get_channel_state(&hdm_ch->ch, &st)->ready) {
+		spin_unlock_irqrestore(&dim_lock, flags);
+		return -EAGAIN;
+	}
+
+	mbo = list_entry(head->next, struct mbo, list);
+	buf_size = mbo->buffer_length;
+
+	BUG_ON(mbo->bus_address == 0);
+	if (!dim_enqueue_buffer(&hdm_ch->ch, mbo->bus_address, buf_size)) {
+		list_del(head->next);
+		spin_unlock_irqrestore(&dim_lock, flags);
+		mbo->processed_length = 0;
+		mbo->status = MBO_E_INVAL;
+		mbo->complete(mbo);
+		return -EFAULT;
+	}
+
+	list_move_tail(head->next, &hdm_ch->started_list);
+	spin_unlock_irqrestore(&dim_lock, flags);
+
+	return 0;
+}
+
+/**
+ * deliver_netinfo_thread - thread to deliver network status to mostcore
+ * @data: private data
+ *
+ * Wait for network status and deliver it to mostcore once it is received
+ */
+static int deliver_netinfo_thread(void *data)
+{
+	struct dim2_hdm *dev = data;
+
+	while (!kthread_should_stop()) {
+		wait_event_interruptible(dev->netinfo_waitq,
+					 dev->deliver_netinfo ||
+					 kthread_should_stop());
+
+		if (dev->deliver_netinfo) {
+			dev->deliver_netinfo--;
+			most_deliver_netinfo(&dev->most_iface, dev->link_state,
+					     dev->mac_addrs);
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * retrieve_netinfo - retrieve network status from received buffer
+ * @dev: private data
+ * @mbo: received MBO
+ *
+ * Parse the message in buffer and get node address, link state, MAC address.
+ * Wake up a thread to deliver this status to mostcore
+ */
+static void retrieve_netinfo(struct dim2_hdm *dev, struct mbo *mbo)
+{
+	u8 *data = mbo->virt_address;
+	u8 *mac = dev->mac_addrs;
+
+	pr_info("Node Address: 0x%03x\n", (u16)data[16] << 8 | data[17]);
+	dev->link_state = data[18];
+	pr_info("NIState: %d\n", dev->link_state);
+	memcpy(mac, data + 19, 6);
+	pr_info("MAC address: %02X:%02X:%02X:%02X:%02X:%02X\n",
+		mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
+	dev->deliver_netinfo++;
+	wake_up_interruptible(&dev->netinfo_waitq);
+}
+
+/**
+ * service_done_flag - handle completed buffers
+ * @dev: private data
+ * @ch_idx: channel index
+ *
+ * Return back the completed buffers to mostcore, using completion callback
+ */
+static void service_done_flag(struct dim2_hdm *dev, int ch_idx)
+{
+	struct hdm_channel *hdm_ch = dev->hch + ch_idx;
+	struct dim_ch_state_t st;
+	struct list_head *head;
+	struct mbo *mbo;
+	int done_buffers;
+	unsigned long flags;
+	u8 *data;
+
+	BUG_ON(!hdm_ch);
+	BUG_ON(!hdm_ch->is_initialized);
+
+	spin_lock_irqsave(&dim_lock, flags);
+
+	done_buffers = dim_get_channel_state(&hdm_ch->ch, &st)->done_buffers;
+	if (!done_buffers) {
+		spin_unlock_irqrestore(&dim_lock, flags);
+		return;
+	}
+
+	if (!dim_detach_buffers(&hdm_ch->ch, done_buffers)) {
+		spin_unlock_irqrestore(&dim_lock, flags);
+		return;
+	}
+	spin_unlock_irqrestore(&dim_lock, flags);
+
+	head = &hdm_ch->started_list;
+
+	while (done_buffers) {
+		spin_lock_irqsave(&dim_lock, flags);
+		if (list_empty(head)) {
+			spin_unlock_irqrestore(&dim_lock, flags);
+			pr_crit("hard error: started_mbo list is empty whereas DIM2 has sent buffers\n");
+			break;
+		}
+
+		mbo = list_entry(head->next, struct mbo, list);
+		list_del(head->next);
+		spin_unlock_irqrestore(&dim_lock, flags);
+
+		data = mbo->virt_address;
+
+		if (hdm_ch->data_type == MOST_CH_ASYNC &&
+		    hdm_ch->direction == MOST_CH_RX &&
+		    PACKET_IS_NET_INFO(data)) {
+			retrieve_netinfo(dev, mbo);
+
+			spin_lock_irqsave(&dim_lock, flags);
+			list_add_tail(&mbo->list, &hdm_ch->pending_list);
+			spin_unlock_irqrestore(&dim_lock, flags);
+		} else {
+			if (hdm_ch->data_type == MOST_CH_CONTROL ||
+			    hdm_ch->data_type == MOST_CH_ASYNC) {
+				u32 const data_size =
+					(u32)data[0] * 256 + data[1] + 2;
+
+				mbo->processed_length =
+					min_t(u32, data_size,
+					      mbo->buffer_length);
+			} else {
+				mbo->processed_length = mbo->buffer_length;
+			}
+			mbo->status = MBO_SUCCESS;
+			mbo->complete(mbo);
+		}
+
+		done_buffers--;
+	}
+}
+
+static struct dim_channel **get_active_channels(struct dim2_hdm *dev,
+						struct dim_channel **buffer)
+{
+	int idx = 0;
+	int ch_idx;
+
+	for (ch_idx = 0; ch_idx < DMA_CHANNELS; ch_idx++) {
+		if (dev->hch[ch_idx].is_initialized)
+			buffer[idx++] = &dev->hch[ch_idx].ch;
+	}
+	buffer[idx++] = NULL;
+
+	return buffer;
+}
+
+/**
+ * dim2_tasklet_fn - tasklet function
+ * @data: private data
+ *
+ * Service each initialized channel, if needed
+ */
+static void dim2_tasklet_fn(unsigned long data)
+{
+	struct dim2_hdm *dev = (struct dim2_hdm *)data;
+	unsigned long flags;
+	int ch_idx;
+
+	for (ch_idx = 0; ch_idx < DMA_CHANNELS; ch_idx++) {
+		if (!dev->hch[ch_idx].is_initialized)
+			continue;
+
+		spin_lock_irqsave(&dim_lock, flags);
+		dim_service_channel(&dev->hch[ch_idx].ch);
+		spin_unlock_irqrestore(&dim_lock, flags);
+
+		service_done_flag(dev, ch_idx);
+		while (!try_start_dim_transfer(dev->hch + ch_idx))
+			continue;
+	}
+}
+
+/**
+ * dim2_ahb_isr - interrupt service routine
+ * @irq: irq number
+ * @_dev: private data
+ *
+ * Acknowledge the interrupt and schedule a tasklet to service channels.
+ * Return IRQ_HANDLED.
+ */
+static irqreturn_t dim2_ahb_isr(int irq, void *_dev)
+{
+	struct dim2_hdm *dev = _dev;
+	struct dim_channel *buffer[DMA_CHANNELS + 1];
+	unsigned long flags;
+
+	spin_lock_irqsave(&dim_lock, flags);
+	dim_service_irq(get_active_channels(dev, buffer));
+	spin_unlock_irqrestore(&dim_lock, flags);
+
+#if !defined(ENABLE_HDM_TEST)
+	dim2_tasklet.data = (unsigned long)dev;
+	tasklet_schedule(&dim2_tasklet);
+#else
+	dim2_tasklet_fn((unsigned long)dev);
+#endif
+	return IRQ_HANDLED;
+}
+
+#if defined(ENABLE_HDM_TEST)
+
+/*
+ * Utility function used by HAL-simu for calling DIM interrupt handler.
+ * It is used only for TEST PURPOSE.
+ */
+void raise_dim_interrupt(void)
+{
+	(void)dim2_ahb_isr(0, test_dev);
+}
+#endif
+
+/**
+ * complete_all_mbos - complete MBO's in a list
+ * @head: list head
+ *
+ * Delete all the entries in list and return back MBO's to mostcore using
+ * completion call back.
+ */
+static void complete_all_mbos(struct list_head *head)
+{
+	unsigned long flags;
+	struct mbo *mbo;
+
+	for (;;) {
+		spin_lock_irqsave(&dim_lock, flags);
+		if (list_empty(head)) {
+			spin_unlock_irqrestore(&dim_lock, flags);
+			break;
+		}
+
+		mbo = list_entry(head->next, struct mbo, list);
+		list_del(head->next);
+		spin_unlock_irqrestore(&dim_lock, flags);
+
+		mbo->processed_length = 0;
+		mbo->status = MBO_E_CLOSE;
+		mbo->complete(mbo);
+	}
+}
+
+/**
+ * configure_channel - initialize a channel
+ * @iface: interface the channel belongs to
+ * @channel: channel to be configured
+ * @channel_config: structure that holds the configuration information
+ *
+ * Receives configuration information from mostcore and initialize
+ * the corresponding channel. Return 0 on success, negative on failure.
+ */
+static int configure_channel(struct most_interface *most_iface, int ch_idx,
+			     struct most_channel_config *ccfg)
+{
+	struct dim2_hdm *dev = iface_to_hdm(most_iface);
+	bool const is_tx = ccfg->direction == MOST_CH_TX;
+	u16 const sub_size = ccfg->subbuffer_size;
+	u16 const buf_size = ccfg->buffer_size;
+	u16 new_size;
+	unsigned long flags;
+	u8 hal_ret;
+	int const ch_addr = ch_idx * 2 + 2;
+	struct hdm_channel *const hdm_ch = dev->hch + ch_idx;
+
+	BUG_ON(ch_idx < 0 || ch_idx >= DMA_CHANNELS);
+
+	if (hdm_ch->is_initialized)
+		return -EPERM;
+
+	switch (ccfg->data_type) {
+	case MOST_CH_CONTROL:
+		new_size = dim_norm_ctrl_async_buffer_size(buf_size);
+		if (new_size == 0) {
+			pr_err("%s: too small buffer size\n", hdm_ch->name);
+			return -EINVAL;
+		}
+		ccfg->buffer_size = new_size;
+		if (new_size != buf_size)
+			pr_warn("%s: fixed buffer size (%d -> %d)\n",
+				hdm_ch->name, buf_size, new_size);
+		spin_lock_irqsave(&dim_lock, flags);
+		hal_ret = dim_init_control(&hdm_ch->ch, is_tx, ch_addr,
+					   buf_size);
+		break;
+	case MOST_CH_ASYNC:
+		new_size = dim_norm_ctrl_async_buffer_size(buf_size);
+		if (new_size == 0) {
+			pr_err("%s: too small buffer size\n", hdm_ch->name);
+			return -EINVAL;
+		}
+		ccfg->buffer_size = new_size;
+		if (new_size != buf_size)
+			pr_warn("%s: fixed buffer size (%d -> %d)\n",
+				hdm_ch->name, buf_size, new_size);
+		spin_lock_irqsave(&dim_lock, flags);
+		hal_ret = dim_init_async(&hdm_ch->ch, is_tx, ch_addr, buf_size);
+		break;
+	case MOST_CH_ISOC_AVP:
+		new_size = dim_norm_isoc_buffer_size(buf_size, sub_size);
+		if (new_size == 0) {
+			pr_err("%s: invalid sub-buffer size or too small buffer size\n",
+			       hdm_ch->name);
+			return -EINVAL;
+		}
+		ccfg->buffer_size = new_size;
+		if (new_size != buf_size)
+			pr_warn("%s: fixed buffer size (%d -> %d)\n",
+				hdm_ch->name, buf_size, new_size);
+		spin_lock_irqsave(&dim_lock, flags);
+		hal_ret = dim_init_isoc(&hdm_ch->ch, is_tx, ch_addr, sub_size);
+		break;
+	case MOST_CH_SYNC:
+		new_size = dim_norm_sync_buffer_size(buf_size, sub_size);
+		if (new_size == 0) {
+			pr_err("%s: invalid sub-buffer size or too small buffer size\n",
+			       hdm_ch->name);
+			return -EINVAL;
+		}
+		ccfg->buffer_size = new_size;
+		if (new_size != buf_size)
+			pr_warn("%s: fixed buffer size (%d -> %d)\n",
+				hdm_ch->name, buf_size, new_size);
+		spin_lock_irqsave(&dim_lock, flags);
+		hal_ret = dim_init_sync(&hdm_ch->ch, is_tx, ch_addr, sub_size);
+		break;
+	default:
+		pr_err("%s: configure failed, bad channel type: %d\n",
+		       hdm_ch->name, ccfg->data_type);
+		return -EINVAL;
+	}
+
+	if (hal_ret != DIM_NO_ERROR) {
+		spin_unlock_irqrestore(&dim_lock, flags);
+		pr_err("%s: configure failed (%d), type: %d, is_tx: %d\n",
+		       hdm_ch->name, hal_ret, ccfg->data_type, (int)is_tx);
+		return -ENODEV;
+	}
+
+	hdm_ch->data_type = ccfg->data_type;
+	hdm_ch->direction = ccfg->direction;
+	hdm_ch->is_initialized = true;
+
+	if (hdm_ch->data_type == MOST_CH_ASYNC &&
+	    hdm_ch->direction == MOST_CH_TX &&
+	    dev->atx_idx < 0)
+		dev->atx_idx = ch_idx;
+
+	spin_unlock_irqrestore(&dim_lock, flags);
+
+	return 0;
+}
+
+/**
+ * enqueue - enqueue a buffer for data transfer
+ * @iface: intended interface
+ * @channel: ID of the channel the buffer is intended for
+ * @mbo: pointer to the buffer object
+ *
+ * Push the buffer into pending_list and try to transfer one buffer from
+ * pending_list. Return 0 on success, negative on failure.
+ */
+static int enqueue(struct most_interface *most_iface, int ch_idx,
+		   struct mbo *mbo)
+{
+	struct dim2_hdm *dev = iface_to_hdm(most_iface);
+	struct hdm_channel *hdm_ch = dev->hch + ch_idx;
+	unsigned long flags;
+
+	BUG_ON(ch_idx < 0 || ch_idx >= DMA_CHANNELS);
+
+	if (!hdm_ch->is_initialized)
+		return -EPERM;
+
+	if (mbo->bus_address == 0)
+		return -EFAULT;
+
+	spin_lock_irqsave(&dim_lock, flags);
+	list_add_tail(&mbo->list, &hdm_ch->pending_list);
+	spin_unlock_irqrestore(&dim_lock, flags);
+
+	(void)try_start_dim_transfer(hdm_ch);
+
+	return 0;
+}
+
+/**
+ * request_netinfo - triggers retrieving of network info
+ * @iface: pointer to the interface
+ * @channel_id: corresponding channel ID
+ *
+ * Send a command to INIC which triggers retrieving of network info by means of
+ * "Message exchange over MDP/MEP". Return 0 on success, negative on failure.
+ */
+static void request_netinfo(struct most_interface *most_iface, int ch_idx)
+{
+	struct dim2_hdm *dev = iface_to_hdm(most_iface);
+	struct mbo *mbo;
+	u8 *data;
+
+	if (dev->atx_idx < 0) {
+		pr_err("Async Tx Not initialized\n");
+		return;
+	}
+
+	mbo = most_get_mbo(&dev->most_iface, dev->atx_idx, NULL);
+	if (!mbo)
+		return;
+
+	mbo->buffer_length = 5;
+
+	data = mbo->virt_address;
+
+	data[0] = 0x00; /* PML High byte */
+	data[1] = 0x03; /* PML Low byte */
+	data[2] = 0x02; /* PMHL */
+	data[3] = 0x08; /* FPH */
+	data[4] = 0x40; /* FMF (FIFO cmd msg - Triggers NAOverMDP) */
+
+	most_submit_mbo(mbo);
+}
+
+/**
+ * poison_channel - poison buffers of a channel
+ * @iface: pointer to the interface the channel to be poisoned belongs to
+ * @channel_id: corresponding channel ID
+ *
+ * Destroy a channel and complete all the buffers in both started_list &
+ * pending_list. Return 0 on success, negative on failure.
+ */
+static int poison_channel(struct most_interface *most_iface, int ch_idx)
+{
+	struct dim2_hdm *dev = iface_to_hdm(most_iface);
+	struct hdm_channel *hdm_ch = dev->hch + ch_idx;
+	unsigned long flags;
+	u8 hal_ret;
+	int ret = 0;
+
+	BUG_ON(ch_idx < 0 || ch_idx >= DMA_CHANNELS);
+
+	if (!hdm_ch->is_initialized)
+		return -EPERM;
+
+	spin_lock_irqsave(&dim_lock, flags);
+	hal_ret = dim_destroy_channel(&hdm_ch->ch);
+	hdm_ch->is_initialized = false;
+	if (ch_idx == dev->atx_idx)
+		dev->atx_idx = -1;
+	spin_unlock_irqrestore(&dim_lock, flags);
+	if (hal_ret != DIM_NO_ERROR) {
+		pr_err("HAL Failed to close channel %s\n", hdm_ch->name);
+		ret = -EFAULT;
+	}
+
+	complete_all_mbos(&hdm_ch->started_list);
+	complete_all_mbos(&hdm_ch->pending_list);
+
+	return ret;
+}
+
+/*
+ * dim2_probe - dim2 probe handler
+ * @pdev: platform device structure
+ *
+ * Register the dim2 interface with mostcore and initialize it.
+ * Return 0 on success, negative on failure.
+ */
+static int dim2_probe(struct platform_device *pdev)
+{
+	struct dim2_hdm *dev;
+	struct resource *res;
+	int ret, i;
+	struct kobject *kobj;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	dev->atx_idx = -1;
+
+	platform_set_drvdata(pdev, dev);
+#if defined(ENABLE_HDM_TEST)
+	test_dev = dev;
+#else
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		pr_err("no memory region defined\n");
+		ret = -ENOENT;
+		goto err_free_dev;
+	}
+
+	if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
+		pr_err("failed to request mem region\n");
+		ret = -EBUSY;
+		goto err_free_dev;
+	}
+
+	dev->io_base = ioremap(res->start, resource_size(res));
+	if (!dev->io_base) {
+		pr_err("failed to ioremap\n");
+		ret = -ENOMEM;
+		goto err_release_mem;
+	}
+
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0) {
+		pr_err("failed to get irq\n");
+		goto err_unmap_io;
+	}
+	dev->irq_ahb0 = ret;
+
+	ret = request_irq(dev->irq_ahb0, dim2_ahb_isr, 0, "mlb_ahb0", dev);
+	if (ret) {
+		pr_err("failed to request IRQ: %d, err: %d\n",
+		       dev->irq_ahb0, ret);
+		goto err_unmap_io;
+	}
+#endif
+	init_waitqueue_head(&dev->netinfo_waitq);
+	dev->deliver_netinfo = 0;
+	dev->netinfo_task = kthread_run(&deliver_netinfo_thread, (void *)dev,
+					"dim2_netinfo");
+	if (IS_ERR(dev->netinfo_task)) {
+		ret = PTR_ERR(dev->netinfo_task);
+		goto err_free_irq;
+	}
+
+	for (i = 0; i < DMA_CHANNELS; i++) {
+		struct most_channel_capability *cap = dev->capabilities + i;
+		struct hdm_channel *hdm_ch = dev->hch + i;
+
+		INIT_LIST_HEAD(&hdm_ch->pending_list);
+		INIT_LIST_HEAD(&hdm_ch->started_list);
+		hdm_ch->is_initialized = false;
+		snprintf(hdm_ch->name, sizeof(hdm_ch->name), "ca%d", i * 2 + 2);
+
+		cap->name_suffix = hdm_ch->name;
+		cap->direction = MOST_CH_RX | MOST_CH_TX;
+		cap->data_type = MOST_CH_CONTROL | MOST_CH_ASYNC |
+				 MOST_CH_ISOC_AVP | MOST_CH_SYNC;
+		cap->num_buffers_packet = MAX_BUFFERS_PACKET;
+		cap->buffer_size_packet = MAX_BUF_SIZE_PACKET;
+		cap->num_buffers_streaming = MAX_BUFFERS_STREAMING;
+		cap->buffer_size_streaming = MAX_BUF_SIZE_STREAMING;
+	}
+
+	{
+		const char *fmt;
+
+		if (sizeof(res->start) == sizeof(long long))
+			fmt = "dim2-%016llx";
+		else if (sizeof(res->start) == sizeof(long))
+			fmt = "dim2-%016lx";
+		else
+			fmt = "dim2-%016x";
+
+		snprintf(dev->name, sizeof(dev->name), fmt, res->start);
+	}
+
+	dev->most_iface.interface = ITYPE_MEDIALB_DIM2;
+	dev->most_iface.description = dev->name;
+	dev->most_iface.num_channels = DMA_CHANNELS;
+	dev->most_iface.channel_vector = dev->capabilities;
+	dev->most_iface.configure = configure_channel;
+	dev->most_iface.enqueue = enqueue;
+	dev->most_iface.poison_channel = poison_channel;
+	dev->most_iface.request_netinfo = request_netinfo;
+
+	kobj = most_register_interface(&dev->most_iface);
+	if (IS_ERR(kobj)) {
+		ret = PTR_ERR(kobj);
+		pr_err("failed to register MOST interface\n");
+		goto err_stop_thread;
+	}
+
+	ret = dim2_sysfs_probe(&dev->bus, kobj);
+	if (ret)
+		goto err_unreg_iface;
+
+	ret = startup_dim(pdev);
+	if (ret) {
+		pr_err("failed to initialize DIM2\n");
+		goto err_destroy_bus;
+	}
+
+	return 0;
+
+err_destroy_bus:
+	dim2_sysfs_destroy(&dev->bus);
+err_unreg_iface:
+	most_deregister_interface(&dev->most_iface);
+err_stop_thread:
+	kthread_stop(dev->netinfo_task);
+err_free_irq:
+#if !defined(ENABLE_HDM_TEST)
+	free_irq(dev->irq_ahb0, dev);
+err_unmap_io:
+	iounmap(dev->io_base);
+err_release_mem:
+	release_mem_region(res->start, resource_size(res));
+err_free_dev:
+#endif
+	kfree(dev);
+
+	return ret;
+}
+
+/**
+ * dim2_remove - dim2 remove handler
+ * @pdev: platform device structure
+ *
+ * Unregister the interface from mostcore
+ */
+static int dim2_remove(struct platform_device *pdev)
+{
+	struct dim2_hdm *dev = platform_get_drvdata(pdev);
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	struct dim2_platform_data *pdata = pdev->dev.platform_data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dim_lock, flags);
+	dim_shutdown();
+	spin_unlock_irqrestore(&dim_lock, flags);
+
+	if (pdata && pdata->destroy)
+		pdata->destroy(pdata);
+
+	dim2_sysfs_destroy(&dev->bus);
+	most_deregister_interface(&dev->most_iface);
+	kthread_stop(dev->netinfo_task);
+#if !defined(ENABLE_HDM_TEST)
+	free_irq(dev->irq_ahb0, dev);
+	iounmap(dev->io_base);
+	release_mem_region(res->start, resource_size(res));
+#endif
+	kfree(dev);
+	platform_set_drvdata(pdev, NULL);
+
+	/*
+	 * break link to local platform_device_id struct
+	 * to prevent crash by unload platform device module
+	 */
+	pdev->id_entry = NULL;
+
+	return 0;
+}
+
+static struct platform_device_id dim2_id[] = {
+	{ "medialb_dim2" },
+	{ }, /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(platform, dim2_id);
+
+static struct platform_driver dim2_driver = {
+	.probe = dim2_probe,
+	.remove = dim2_remove,
+	.id_table = dim2_id,
+	.driver = {
+		.name = "hdm_dim2",
+	},
+};
+
+module_platform_driver(dim2_driver);
+
+MODULE_AUTHOR("Jain Roy Ambi <JainRoy.Ambi@microchip.com>");
+MODULE_AUTHOR("Andrey Shvetsov <andrey.shvetsov@k2l.de>");
+MODULE_DESCRIPTION("MediaLB DIM2 Hardware Dependent Module");
+MODULE_LICENSE("GPL");
diff --git a/recipes-kernel/hdm-dim2/files/dim2_hdm.h b/recipes-kernel/hdm-dim2/files/dim2_hdm.h
new file mode 100644
index 000000000..1c94e3355
--- /dev/null
+++ b/recipes-kernel/hdm-dim2/files/dim2_hdm.h
@@ -0,0 +1,27 @@
+/*
+ * dim2_hdm.h - MediaLB DIM2 HDM Header
+ *
+ * Copyright (C) 2015, Microchip Technology Germany II GmbH & Co. KG
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This file is licensed under GPLv2.
+ */
+
+#ifndef DIM2_HDM_H
+#define	DIM2_HDM_H
+
+struct device;
+
+/* platform dependent data for dim2 interface */
+struct dim2_platform_data {
+	int (*init)(struct dim2_platform_data *pd, void *io_base,
+		    int clk_speed);
+	void (*destroy)(struct dim2_platform_data *pd);
+	void *priv;
+};
+
+#endif	/* DIM2_HDM_H */
diff --git a/recipes-kernel/hdm-dim2/files/dim2_reg.h b/recipes-kernel/hdm-dim2/files/dim2_reg.h
new file mode 100644
index 000000000..bcf6a79f6
--- /dev/null
+++ b/recipes-kernel/hdm-dim2/files/dim2_reg.h
@@ -0,0 +1,173 @@
+/*
+ * dim2_reg.h - Definitions for registers of DIM2
+ * (MediaLB, Device Interface Macro IP, OS62420)
+ *
+ * Copyright (C) 2015, Microchip Technology Germany II GmbH & Co. KG
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This file is licensed under GPLv2.
+ */
+
+#ifndef DIM2_OS62420_H
+#define	DIM2_OS62420_H
+
+#include <linux/types.h>
+
+#ifdef	__cplusplus
+extern "C" {
+#endif
+
+struct dim2_regs {
+	/* 0x00 */ u32 MLBC0;
+	/* 0x01 */ u32 rsvd0[1];
+	/* 0x02 */ u32 MLBPC0;
+	/* 0x03 */ u32 MS0;
+	/* 0x04 */ u32 rsvd1[1];
+	/* 0x05 */ u32 MS1;
+	/* 0x06 */ u32 rsvd2[2];
+	/* 0x08 */ u32 MSS;
+	/* 0x09 */ u32 MSD;
+	/* 0x0A */ u32 rsvd3[1];
+	/* 0x0B */ u32 MIEN;
+	/* 0x0C */ u32 rsvd4[1];
+	/* 0x0D */ u32 MLBPC2;
+	/* 0x0E */ u32 MLBPC1;
+	/* 0x0F */ u32 MLBC1;
+	/* 0x10 */ u32 rsvd5[0x10];
+	/* 0x20 */ u32 HCTL;
+	/* 0x21 */ u32 rsvd6[1];
+	/* 0x22 */ u32 HCMR0;
+	/* 0x23 */ u32 HCMR1;
+	/* 0x24 */ u32 HCER0;
+	/* 0x25 */ u32 HCER1;
+	/* 0x26 */ u32 HCBR0;
+	/* 0x27 */ u32 HCBR1;
+	/* 0x28 */ u32 rsvd7[8];
+	/* 0x30 */ u32 MDAT0;
+	/* 0x31 */ u32 MDAT1;
+	/* 0x32 */ u32 MDAT2;
+	/* 0x33 */ u32 MDAT3;
+	/* 0x34 */ u32 MDWE0;
+	/* 0x35 */ u32 MDWE1;
+	/* 0x36 */ u32 MDWE2;
+	/* 0x37 */ u32 MDWE3;
+	/* 0x38 */ u32 MCTL;
+	/* 0x39 */ u32 MADR;
+	/* 0x3A */ u32 rsvd8[0xB6];
+	/* 0xF0 */ u32 ACTL;
+	/* 0xF1 */ u32 rsvd9[3];
+	/* 0xF4 */ u32 ACSR0;
+	/* 0xF5 */ u32 ACSR1;
+	/* 0xF6 */ u32 ACMR0;
+	/* 0xF7 */ u32 ACMR1;
+};
+
+#define DIM2_MASK(n)  (~((~(u32)0) << (n)))
+
+enum {
+	MLBC0_MLBLK_BIT = 7,
+
+	MLBC0_MLBPEN_BIT = 5,
+
+	MLBC0_MLBCLK_SHIFT = 2,
+	MLBC0_MLBCLK_VAL_256FS = 0,
+	MLBC0_MLBCLK_VAL_512FS = 1,
+	MLBC0_MLBCLK_VAL_1024FS = 2,
+	MLBC0_MLBCLK_VAL_2048FS = 3,
+
+	MLBC0_FCNT_SHIFT = 15,
+	MLBC0_FCNT_MASK = 7,
+	MLBC0_FCNT_VAL_1FPSB = 0,
+	MLBC0_FCNT_VAL_2FPSB = 1,
+	MLBC0_FCNT_VAL_4FPSB = 2,
+	MLBC0_FCNT_VAL_8FPSB = 3,
+	MLBC0_FCNT_VAL_16FPSB = 4,
+	MLBC0_FCNT_VAL_32FPSB = 5,
+	MLBC0_FCNT_VAL_64FPSB = 6,
+
+	MLBC0_MLBEN_BIT = 0,
+
+	MIEN_CTX_BREAK_BIT = 29,
+	MIEN_CTX_PE_BIT = 28,
+	MIEN_CTX_DONE_BIT = 27,
+
+	MIEN_CRX_BREAK_BIT = 26,
+	MIEN_CRX_PE_BIT = 25,
+	MIEN_CRX_DONE_BIT = 24,
+
+	MIEN_ATX_BREAK_BIT = 22,
+	MIEN_ATX_PE_BIT = 21,
+	MIEN_ATX_DONE_BIT = 20,
+
+	MIEN_ARX_BREAK_BIT = 19,
+	MIEN_ARX_PE_BIT = 18,
+	MIEN_ARX_DONE_BIT = 17,
+
+	MIEN_SYNC_PE_BIT = 16,
+
+	MIEN_ISOC_BUFO_BIT = 1,
+	MIEN_ISOC_PE_BIT = 0,
+
+	MLBC1_NDA_SHIFT = 8,
+	MLBC1_NDA_MASK = 0xFF,
+
+	MLBC1_CLKMERR_BIT = 7,
+	MLBC1_LOCKERR_BIT = 6,
+
+	ACTL_DMA_MODE_BIT = 2,
+	ACTL_DMA_MODE_VAL_DMA_MODE_0 = 0,
+	ACTL_DMA_MODE_VAL_DMA_MODE_1 = 1,
+	ACTL_SCE_BIT = 0,
+
+	HCTL_EN_BIT = 15
+};
+
+enum {
+	CDT1_BS_ISOC_SHIFT = 0,
+	CDT1_BS_ISOC_MASK = DIM2_MASK(9),
+
+	CDT3_BD_SHIFT = 0,
+	CDT3_BD_MASK = DIM2_MASK(12),
+	CDT3_BD_ISOC_MASK = DIM2_MASK(13),
+	CDT3_BA_SHIFT = 16,
+
+	ADT0_CE_BIT = 15,
+	ADT0_LE_BIT = 14,
+	ADT0_PG_BIT = 13,
+
+	ADT1_RDY_BIT = 15,
+	ADT1_DNE_BIT = 14,
+	ADT1_ERR_BIT = 13,
+	ADT1_PS_BIT = 12,
+	ADT1_MEP_BIT = 11,
+	ADT1_BD_SHIFT = 0,
+	ADT1_CTRL_ASYNC_BD_MASK = DIM2_MASK(11),
+	ADT1_ISOC_SYNC_BD_MASK = DIM2_MASK(13),
+
+	CAT_MFE_BIT = 14,
+
+	CAT_MT_BIT = 13,
+
+	CAT_RNW_BIT = 12,
+
+	CAT_CE_BIT = 11,
+
+	CAT_CT_SHIFT = 8,
+	CAT_CT_VAL_SYNC = 0,
+	CAT_CT_VAL_CONTROL = 1,
+	CAT_CT_VAL_ASYNC = 2,
+	CAT_CT_VAL_ISOC = 3,
+
+	CAT_CL_SHIFT = 0,
+	CAT_CL_MASK = DIM2_MASK(6)
+};
+
+#ifdef	__cplusplus
+}
+#endif
+
+#endif	/* DIM2_OS62420_H */
diff --git a/recipes-kernel/hdm-dim2/files/dim2_sysfs.c b/recipes-kernel/hdm-dim2/files/dim2_sysfs.c
new file mode 100644
index 000000000..c5b10c7d2
--- /dev/null
+++ b/recipes-kernel/hdm-dim2/files/dim2_sysfs.c
@@ -0,0 +1,117 @@
+/*
+ * dim2_sysfs.c - MediaLB sysfs information
+ *
+ * Copyright (C) 2015, Microchip Technology Germany II GmbH & Co. KG
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This file is licensed under GPLv2.
+ */
+
+/* Author: Andrey Shvetsov <andrey.shvetsov@k2l.de> */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include "dim2_sysfs.h"
+
+struct bus_attr {
+	struct attribute attr;
+	ssize_t (*show)(struct medialb_bus *bus, char *buf);
+	ssize_t (*store)(struct medialb_bus *bus, const char *buf,
+			 size_t count);
+};
+
+static ssize_t state_show(struct medialb_bus *bus, char *buf)
+{
+	bool state = dim2_sysfs_get_state_cb();
+
+	return sprintf(buf, "%s\n", state ? "locked" : "");
+}
+
+static struct bus_attr state_attr = __ATTR_RO(state);
+
+static struct attribute *bus_default_attrs[] = {
+	&state_attr.attr,
+	NULL,
+};
+
+static struct attribute_group bus_attr_group = {
+	.attrs = bus_default_attrs,
+};
+
+static void bus_kobj_release(struct kobject *kobj)
+{
+}
+
+static ssize_t bus_kobj_attr_show(struct kobject *kobj, struct attribute *attr,
+				  char *buf)
+{
+	struct medialb_bus *bus =
+		container_of(kobj, struct medialb_bus, kobj_group);
+	struct bus_attr *xattr = container_of(attr, struct bus_attr, attr);
+
+	if (!xattr->show)
+		return -EIO;
+
+	return xattr->show(bus, buf);
+}
+
+static ssize_t bus_kobj_attr_store(struct kobject *kobj, struct attribute *attr,
+				   const char *buf, size_t count)
+{
+	ssize_t ret;
+	struct medialb_bus *bus =
+		container_of(kobj, struct medialb_bus, kobj_group);
+	struct bus_attr *xattr = container_of(attr, struct bus_attr, attr);
+
+	if (!xattr->store)
+		return -EIO;
+
+	ret = xattr->store(bus, buf, count);
+	return ret;
+}
+
+static struct sysfs_ops const bus_kobj_sysfs_ops = {
+	.show = bus_kobj_attr_show,
+	.store = bus_kobj_attr_store,
+};
+
+static struct kobj_type bus_ktype = {
+	.release = bus_kobj_release,
+	.sysfs_ops = &bus_kobj_sysfs_ops,
+};
+
+int dim2_sysfs_probe(struct medialb_bus *bus, struct kobject *parent_kobj)
+{
+	int err;
+
+	kobject_init(&bus->kobj_group, &bus_ktype);
+	err = kobject_add(&bus->kobj_group, parent_kobj, "bus");
+	if (err) {
+		pr_err("kobject_add() failed: %d\n", err);
+		goto err_kobject_add;
+	}
+
+	err = sysfs_create_group(&bus->kobj_group, &bus_attr_group);
+	if (err) {
+		pr_err("sysfs_create_group() failed: %d\n", err);
+		goto err_create_group;
+	}
+
+	return 0;
+
+err_create_group:
+	kobject_put(&bus->kobj_group);
+
+err_kobject_add:
+	return err;
+}
+
+void dim2_sysfs_destroy(struct medialb_bus *bus)
+{
+	kobject_put(&bus->kobj_group);
+}
diff --git a/recipes-kernel/hdm-dim2/files/dim2_sysfs.h b/recipes-kernel/hdm-dim2/files/dim2_sysfs.h
new file mode 100644
index 000000000..b71dd027e
--- /dev/null
+++ b/recipes-kernel/hdm-dim2/files/dim2_sysfs.h
@@ -0,0 +1,36 @@
+/*
+ * dim2_sysfs.h - MediaLB sysfs information
+ *
+ * Copyright (C) 2015, Microchip Technology Germany II GmbH & Co. KG
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * This file is licensed under GPLv2.
+ */
+
+/* Author: Andrey Shvetsov <andrey.shvetsov@k2l.de> */
+
+#ifndef DIM2_SYSFS_H
+#define	DIM2_SYSFS_H
+
+#include <linux/kobject.h>
+
+struct medialb_bus {
+	struct kobject kobj_group;
+};
+
+struct dim2_hdm;
+
+int dim2_sysfs_probe(struct medialb_bus *bus, struct kobject *parent_kobj);
+void dim2_sysfs_destroy(struct medialb_bus *bus);
+
+/*
+ * callback,
+ * must deliver MediaLB state as true if locked or false if unlocked
+ */
+bool dim2_sysfs_get_state_cb(void);
+
+#endif	/* DIM2_SYSFS_H */
diff --git a/recipes-kernel/hdm-dim2/hdm-dim2.bb b/recipes-kernel/hdm-dim2/hdm-dim2.bb
new file mode 100644
index 000000000..438117a49
--- /dev/null
+++ b/recipes-kernel/hdm-dim2/hdm-dim2.bb
@@ -0,0 +1,31 @@
+DESCRIPTION = "Example of how to build an external Linux kernel module"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=12f884d2ae1ff87c09e5b7ccc2c4ca7e \
+		    file://dim2_hdm.c;md5=263233c0fde1611b5b416f415bd3594d \  
+		    file://dim2_hal.c;md5=9ae71bc76a4a056593eec2efc5703f50 \
+		    file://dim2_sysfs.c;md5=d66a0b6e9b3979d18653029d1cb4c362 \  
+		   "
+
+inherit module
+
+PR = "r0"
+PV = "0.1"
+
+SRC_URI = "file://Makefile \
+	   file://../../mostcore/files/mostcore.h \
+	   file://../../aim-network/files/networking.h \
+	   file://dim2_hal.h \
+	   file://dim2_hdm.h \
+	   file://dim2_sysfs.h \
+	   file://dim2_reg.h \
+	   file://dim2_errors.h \
+	   file://dim2_hdm.c \
+	   file://dim2_hal.c \
+	   file://dim2_sysfs.c \
+	   file://COPYING \
+	  "
+
+S = "${WORKDIR}"
+
+# The inherit of module.bbclass will automatically name module packages with
+# "kernel-module-" prefix as required by the oe-core build environment.