diff options
18 files changed, 563 insertions, 0 deletions
diff --git a/recipes-connectivity/kuksa-val/can-dev-helper/can-dev-helper.service b/recipes-connectivity/kuksa-val/can-dev-helper/can-dev-helper.service new file mode 100644 index 000000000..04e6a9c35 --- /dev/null +++ b/recipes-connectivity/kuksa-val/can-dev-helper/can-dev-helper.service @@ -0,0 +1,10 @@ +[Unit] +Description=CAN interface helper +Before=kuksa-dbc-feeder.service + +[Service] +ExecStart=/usr/sbin/can-dev-helper.sh +Type=oneshot + +[Install] +WantedBy=multi-user.target diff --git a/recipes-connectivity/kuksa-val/can-dev-helper/can-dev-helper.sh b/recipes-connectivity/kuksa-val/can-dev-helper/can-dev-helper.sh new file mode 100644 index 000000000..de9894d76 --- /dev/null +++ b/recipes-connectivity/kuksa-val/can-dev-helper/can-dev-helper.sh @@ -0,0 +1,33 @@ +#!/bin/bash + +# +# Script to bring up CAN interface configured for the kuksa.val +# CAN feeder in /etc/kuksa-dbc-feeder/dbc_feeder.ini as vcan +# interfaces if no physical interface is present. +# + +vcan_up() { + if [ -n "$1" ]; then + echo "Bringing up $1 as virtual CAN device" + ip link add dev $1 type vcan + ip link set up $1 + fi +} + +CONF=/etc/kuksa-dbc-feeder/config.ini + +if [ ! -f $CONF ]; then + exit 0 +fi + +# Ideally the parsing would take the "[can]" section into +# account, but this should work for now. +interface=$(grep ^port= $CONF |cut -d= -f2 |tr -d '"') +if [ -n "$interface" ]; then + echo "Checking $interface" + if ! ifconfig $interface >/dev/null 2>&1; then + vcan_up $interface + fi +fi + +exit 0 diff --git a/recipes-connectivity/kuksa-val/can-dev-helper_1.0.bb b/recipes-connectivity/kuksa-val/can-dev-helper_1.0.bb new file mode 100644 index 000000000..90f5ff1cd --- /dev/null +++ b/recipes-connectivity/kuksa-val/can-dev-helper_1.0.bb @@ -0,0 +1,23 @@ +SUMMARY = "Systemd unit for CAN device helper" +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302" + +SRC_URI = "file://can-dev-helper.service \ + file://can-dev-helper.sh \ +" + +inherit systemd allarch + +SYSTEMD_SERVICE:${PN} = "${BPN}.service" + +do_configure[noexec] = "1" +do_compile[noexec] = "1" + +do_install() { + install -D -m 0644 ${WORKDIR}/${BPN}.service ${D}${systemd_system_unitdir}/${BPN}.service + install -D -m 0755 ${WORKDIR}/${BPN}.sh ${D}${sbindir}/${BPN}.sh +} + +FILES:${PN} += "${systemd_system_unitdir}" + +RDEPENDS:${PN} += "bash" diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/0001-dbc2val-add-installation-mechanism.patch b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/0001-dbc2val-add-installation-mechanism.patch new file mode 100644 index 000000000..1e84eeb7e --- /dev/null +++ b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/0001-dbc2val-add-installation-mechanism.patch @@ -0,0 +1,164 @@ +From 603b5a584bd2b348befc9bab8f1ea0a7974f9d77 Mon Sep 17 00:00:00 2001 +From: Scott Murray <scott.murray@konsulko.com> +Date: Wed, 11 May 2022 15:31:25 -0400 +Subject: [PATCH] dbc2val: add installation mechanism + +Add setup.py and setup.cfg to allow installing the dbc2val module +and dbcfeeder.py in a way suitable for packaging. Some of the +imports in the scripts have been tweaked to enable running against +an installed copy of dbc2val. + +Signed-off-by: Scott Murray <scott.murray@konsulko.com> + +--- + kuksa_feeders/dbc2val/__init__.py | 0 + kuksa_feeders/dbc2val/dbc2vssmapper.py | 12 ++++----- + kuksa_feeders/dbc2val/dbcfeeder.py | 6 ++--- + kuksa_feeders/setup.cfg | 31 ++++++++++++++++++++++ + kuksa_feeders/setup.py | 36 ++++++++++++++++++++++++++ + 5 files changed, 75 insertions(+), 10 deletions(-) + create mode 100644 kuksa_feeders/dbc2val/__init__.py + create mode 100644 kuksa_feeders/setup.cfg + create mode 100644 kuksa_feeders/setup.py + +diff --git a/kuksa_feeders/dbc2val/__init__.py b/kuksa_feeders/dbc2val/__init__.py +new file mode 100644 +index 0000000..e69de29 +diff --git a/kuksa_feeders/dbc2val/dbc2vssmapper.py b/kuksa_feeders/dbc2val/dbc2vssmapper.py +index a43d1bd..1718154 100644 +--- a/kuksa_feeders/dbc2val/dbc2vssmapper.py ++++ b/kuksa_feeders/dbc2val/dbc2vssmapper.py +@@ -11,8 +11,8 @@ + ######################################################################## + + import yaml +-import transforms.mapping +-import transforms.math ++from dbc2val.transforms import mapping ++from dbc2val.transforms import math + + + class mapper: +@@ -22,9 +22,9 @@ class mapper: + self.mapping = yaml.full_load(file) + + self.transforms={} +- self.transforms['fullmapping']=transforms.mapping.mapping(discard_non_matching_items=True) +- self.transforms['partialmapping']=transforms.mapping.mapping(discard_non_matching_items=False) +- self.transforms['math']=transforms.math.math() ++ self.transforms['fullmapping']=mapping.mapping(discard_non_matching_items=True) ++ self.transforms['partialmapping']=mapping.mapping(discard_non_matching_items=False) ++ self.transforms['math']=math.math() + + + +@@ -62,4 +62,4 @@ class mapper: + + def __getitem__(self, item): + return self.mapping[item] +- +\ No newline at end of file ++ +diff --git a/kuksa_feeders/dbc2val/dbcfeeder.py b/kuksa_feeders/dbc2val/dbcfeeder.py +index 71939c6..56c316a 100755 +--- a/kuksa_feeders/dbc2val/dbcfeeder.py ++++ b/kuksa_feeders/dbc2val/dbcfeeder.py +@@ -16,10 +16,7 @@ import configparser + import queue + import json + +-import dbc2vssmapper +-import dbcreader +-import j1939reader +-import elm2canbridge ++from dbc2val import dbc2vssmapper, dbcreader, j1939reader, elm2canbridge + + scriptDir= os.path.dirname(os.path.realpath(__file__)) + sys.path.append(os.path.join(scriptDir, "../../")) +@@ -27,6 +24,7 @@ from kuksa_viss_client import KuksaClientThread + + print("kuksa.val DBC example feeder") + config_candidates=['/config/dbc_feeder.ini', '/etc/dbc_feeder.ini', os.path.join(scriptDir, 'config/dbc_feeder.ini')] ++configfile = None + for candidate in config_candidates: + if os.path.isfile(candidate): + configfile=candidate +diff --git a/kuksa_feeders/setup.cfg b/kuksa_feeders/setup.cfg +new file mode 100644 +index 0000000..4b69ccf +--- /dev/null ++++ b/kuksa_feeders/setup.cfg +@@ -0,0 +1,31 @@ ++[metadata] ++name = dbc2val ++author = Sebastian Schildt, Naresh Nayak, Wenwen Chen ++author_email = sebastian.schildt@de.bosch.com, naresh.nayak@de.bosch.com, wenwen.chen@de.bosch.com ++description = kuksa.val DBC feeder ++long_description = file:README.md ++long_description_content_type = text/markdown ++url=https://github.com/eclipse/kuksa.val ++project_urls= ++ Source=https://github.com/eclipse/kuksa.val/tree/master/kuksa_feeders/dbc2val ++ Bug Tracker=https://github.com/eclipse/kuksa.val/issues ++classifiers = ++ Intended Audience :: Developers ++ Development Status :: 3 - Alpha ++ Environment :: Console ++ Programming Language :: Python :: 3 ++ License :: OSI Approved :: Eclipse Public License 2.0 (EPL-2.0) ++ Operating System :: OS Independent ++ Topic :: Software Development ++ ++license_file = ../LICENSE ++ ++[options] ++python_requires = >=3.6 ++install_requires= ++ pyserial ++ pyyaml ++ kuksa-viss-client ++packages=find: ++include_package_data = True ++scripts=dbc2val/dbcfeeder.py +diff --git a/kuksa_feeders/setup.py b/kuksa_feeders/setup.py +new file mode 100644 +index 0000000..ad08d17 +--- /dev/null ++++ b/kuksa_feeders/setup.py +@@ -0,0 +1,36 @@ ++# To avoid shipping dbcfeeder.py in the module itself, use the ++# technique outlined at: ++# ++# https://stackoverflow.com/a/50592100 ++# ++# This can be removed if the directory structure is ever reorganized ++# more along the lines of upstream recommendations. ++# ++ ++import fnmatch ++from setuptools import find_packages, setup ++from setuptools.command.build_py import build_py as build_py_orig ++ ++exclude = ['dbc2val.dbcfeeder'] ++ ++class build_py(build_py_orig): ++ def find_package_modules(self, package, package_dir): ++ modules = super().find_package_modules(package, package_dir) ++ print("modules = %s" % modules) ++ return [(pkg, mod, file, ) for (pkg, mod, file, ) in modules ++ if not any(fnmatch.fnmatchcase(pkg + '.' + mod, pat=pattern) ++ for pattern in exclude)] ++ ++setup( ++ version_config={ ++ "template": "{tag}", ++ "dev_template": "{tag}-{ccount}", ++ "dirty_template": "{tag}-{ccount}-dirty", ++ "starting_version": "0.1.11", ++ "version_callback": None, ++ "version_file": None, ++ "count_commits_from_version_file": False ++ }, ++ setup_requires=['setuptools-git-versioning'], ++ cmdclass={'build_py': build_py}, ++) diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/0002-dbc2val-usability-improvements.patch b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/0002-dbc2val-usability-improvements.patch new file mode 100644 index 000000000..12e366aa8 --- /dev/null +++ b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/0002-dbc2val-usability-improvements.patch @@ -0,0 +1,120 @@ +From fe10a3645e77cd8122d3d312d317bedcb88bc683 Mon Sep 17 00:00:00 2001 +From: Scott Murray <scott.murray@konsulko.com> +Date: Thu, 12 May 2022 17:39:56 +0200 +Subject: [PATCH] dbc2val: usability improvements + +Changes: +- Tweaked default configuration file search path to better match + Linux FHS and kuksa-val-server. First look for a config.ini in + /etc/kuksa-dbc-feeder, then /etc/dbc_feeder.ini. +- Added a command-line option to specify configuration file, this + should allow running two instances against different interfaces. +- Added verbosity command-line option and made several messages + verbose mode only to avoid log spamming. +- Added '-u' option to python invocation to disable output buffering. + The intent is to make logging immediate, otherwise errors may not + get logged for some time (or at all). +- Add catching of exceptions around CAN device opening so that the + script can exit cleanly with an error message if the device is + not available. + +Upstream-Status: pending +Signed-off-by: Scott Murray <scott.murray@konsulko.com> +--- + kuksa_feeders/dbc2val/dbcfeeder.py | 40 ++++++++++++++++++++++-------- + 1 file changed, 29 insertions(+), 11 deletions(-) + +diff --git a/kuksa_feeders/dbc2val/dbcfeeder.py b/kuksa_feeders/dbc2val/dbcfeeder.py +index 56c316a..d2d70b9 100755 +--- a/kuksa_feeders/dbc2val/dbcfeeder.py ++++ b/kuksa_feeders/dbc2val/dbcfeeder.py +@@ -1,4 +1,4 @@ +-#!/usr/bin/env python ++#!/usr/bin/env -S python -u + + ######################################################################## + # Copyright (c) 2020 Robert Bosch GmbH +@@ -15,15 +15,21 @@ import os, sys, signal + import configparser + import queue + import json ++import argparse + + from dbc2val import dbc2vssmapper, dbcreader, j1939reader, elm2canbridge +- +-scriptDir= os.path.dirname(os.path.realpath(__file__)) +-sys.path.append(os.path.join(scriptDir, "../../")) + from kuksa_viss_client import KuksaClientThread + +-print("kuksa.val DBC example feeder") +-config_candidates=['/config/dbc_feeder.ini', '/etc/dbc_feeder.ini', os.path.join(scriptDir, 'config/dbc_feeder.ini')] ++parser = argparse.ArgumentParser("kuksa.val DBC example feeder") ++parser.add_argument("-c", "--config", dest="userconfig") ++parser.add_argument("-v", "--verbose", action="store_true") ++args = parser.parse_args() ++ ++if args.verbose: ++ print("kuksa.val DBC example feeder") ++config_candidates=['/etc/kuksa-dbc-feeder/config.ini', '/etc/dbc_feeder.ini'] ++if args.userconfig is not None: ++ config_candidates.insert(0, args.userconfig) + configfile = None + for candidate in config_candidates: + if os.path.isfile(candidate): +@@ -54,10 +60,12 @@ cancfg = config['can'] + canport = cancfg['port'] + + if config["can"].getboolean("j1939", False): +- print("Use j1939 reader") ++ if args.verbose: ++ print("Use j1939 reader") + reader = j1939reader.J1939Reader(cancfg,canQueue,mapping) + else: +- print("Use dbc reader") ++ if args.verbose: ++ print("Use dbc reader") + reader = dbcreader.DBCReader(cancfg, canQueue,mapping) + + if canport == 'elmcan': +@@ -65,10 +73,18 @@ if canport == 'elmcan': + print("section {} missing from configuration, exiting".format(canport)) + sys.exit(-1) + +- print("Using elmcan. Trying to set up elm2can bridge") ++ if args.verbose: ++ print("Using elmcan. Trying to set up elm2can bridge") + elmbr=elm2canbridge.elm2canbridge(canport, config[canport], reader.canidwl) + +-reader.start_listening() ++try: ++ reader.start_listening() ++except: ++ print("Could not open {}, exiting".format(canport)) ++ kuksa.stop() ++ reader.stop() ++ sys.exit(-1) ++ + running = True + + def terminationSignalreceived(signalNumber, frame): +@@ -77,6 +93,7 @@ def terminationSignalreceived(signalNumber, frame): + kuksa.stop() + reader.stop() + print("Received termination signal. Shutting down") ++ sys.exit(0) + + signal.signal(signal.SIGINT, terminationSignalreceived) + signal.signal(signal.SIGQUIT, terminationSignalreceived) +@@ -88,7 +105,8 @@ while running: + for target in mapping[signal]['targets']: + tv=mapping.transform(signal,target,value) + if tv is not None: #none indicates the transform decided to not set the value +- print("Update VSS path {} to {} based on signal {}".format(target, tv, signal)) ++ if args.verbose: ++ print("Update VSS path {} to {} based on signal {}".format(target, tv, signal)) + resp=json.loads(kuksa.setValue(target, str(tv))) + if "error" in resp: + if "message" in resp["error"]: +-- +2.35.1 + diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/agl-vcar.dbc b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/agl-vcar.dbc new file mode 100644 index 000000000..c7efcf6d3 --- /dev/null +++ b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/agl-vcar.dbc @@ -0,0 +1,31 @@ +VERSION "AGL Virtual Car 1.0" + +BS_: + +BO_ 1001 Vehicle_Status_1: 8 Vector_XXX + SG_ PT_VehicleAvgSpeed : 7|15@0+ (0.015625,0) [0|0] "" Vector_XXX + +BO_ 985 Vehicle_Status_2: 8 Vector_XXX + SG_ PT_FuelLevelPct : 8|8@1+ (0.392157,0) [0|0] "" Vector_XXX + SG_ PT_EngineSpeed : 23|16@0+ (0.25,0) [0|0] "" Vector_XXX + SG_ PT_FuelLevelLow : 55|1@1+ (1,0) [0|1] "" Vector_XXX + +BO_ 33 Steering_Wheel: 8 Vector_XXX + SG_ SW_Previous : 32|1@1+ (1,0) [0|1] "" Vector_XXX + SG_ SW_VolumeUp : 33|1@1+ (1,0) [0|1] "" Vector_XXX + SG_ SW_Mode : 34|1@1+ (1,0) [0|1] "" Vector_XXX + SG_ SW_VolumeDown : 35|1@1+ (1,0) [0|1] "" Vector_XXX + SG_ SW_Next : 36|1@1+ (1,0) [0|1] "" Vector_XXX + SG_ SW_Info : 38|1@1+ (1,0) [0|1] "" Vector_XXX + SG_ SW_VolumeMute : 39|1@1+ (1,0) [0|1] "" Vector_XXX + SG_ SW_Voice : 45|1@1+ (1,0) [0|1] "" Vector_XXX + SG_ SW_PhoneHangup : 46|1@1+ (1,0) [0|1] "" Vector_XXX + SG_ SW_PhoneCall : 47|1@1+ (1,0) [0|1] "" Vector_XXX + SG_ SW_CruiseEnable : 48|1@1+ (1,0) [0|1] "" Vector_XXX + SG_ SW_CruiseResume : 49|1@1+ (1,0) [0|1] "" Vector_XXX + SG_ SW_CruiseSet : 51|1@1+ (1,0) [0|1] "" Vector_XXX + SG_ SW_CruiseCancel : 52|1@1+ (1,0) [0|1] "" Vector_XXX + SG_ SW_CruiseLimit : 54|1@1+ (1,0) [0|1] "" Vector_XXX + SG_ SW_CruiseDistance : 55|1@1+ (1,0) [0|1] "" Vector_XXX + SG_ SW_Horn : 56|1@1+ (1,0) [0|1] "" Vector_XXX + SG_ SW_LaneDepartureWarning : 63|1@1+ (1,0) [0|1] "" Vector_XXX diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/config.ini b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/config.ini new file mode 100644 index 000000000..25c9fd273 --- /dev/null +++ b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/config.ini @@ -0,0 +1,15 @@ +[kuksa_val] +# kuksa VSS server address +server=wss://localhost:8090 +# JWT security token file +token=/etc/kuksa-dbc-feeder/dbc_feeder.json.token +# VSS mapping file +mapping=/etc/kuksa-dbc-feeder/mapping.yml + +[can] +# CAN port +port=can0 +#Enable SAE-J1939 Mode. False: ignore +j1939=False +# DBC file used to parse CAN messages +dbcfile=/etc/kuksa-dbc-feeder/agl-vcar.dbc diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/dbc_feeder.json.token b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/dbc_feeder.json.token new file mode 100644 index 000000000..b8df66663 --- /dev/null +++ b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/dbc_feeder.json.token @@ -0,0 +1 @@ +eyJ0eXAiOiJKV1QiLCJhbGciOiJSUzI1NiJ9.eyJzdWIiOiJrdWtzYS52YWwiLCJpc3MiOiJFY2xpcHNlIEtVS1NBIERldiIsImFkbWluIjp0cnVlLCJtb2RpZnlUcmVlIjp0cnVlLCJpYXQiOjE1MTYyMzkwMjIsImV4cCI6MTc2NzIyNTU5OSwia3Vrc2EtdnNzIjp7IioiOiJydyJ9fQ.p2cnFGH16QoQ14l6ljPVKggFXZKmD-vrw8G6Vs6DvAokjsUG8FHh-F53cMsE-GDjyZH_1_CrlDCnbGlqjsFbgAylqA7IAJWp9_N6dL5p8DHZTwlZ4IV8L1CtCALs7XVqvcQKHCCzB63Y8PgVDCAqpQSRb79JPVD4pZwkBKpOknfEY5y9wfbswZiRKdgz7o61_oFnd-yywpse-23HD6v0htThVF1SuGL1PuvGJ8p334nt9bpkZO3gaTh1xVD_uJMwHzbuBCF33_f-I5QMZO6bVooXqGfe1zvl3nDrPEjq1aPulvtP8RgREYEqE6b2hB8jouTiC_WpE3qrdMw9sfWGFbm04qC-2Zjoa1yYSXoxmYd0SnliSYHAad9aXoEmFENezQV-of7sc-NX1-2nAXRAEhaqh0IRuJwB4_sG7SvQmnanwkz-sBYxKqkoFpOsZ6hblgPDOPYY2NAsZlYkjvAL2mpiInrsmY_GzGsfwPeAx31iozImX75rao8rm-XucAmCIkRlpBz6MYKCjQgyRz3UtZCJ2DYF4lKqTjphEAgclbYZ7KiCuTn9HualwtEmVzHHFneHMKl7KnRQk-9wjgiyQ5nlsVpCCblg6JKr9of4utuPO3cBvbjhB4_ueQ40cpWVOICcOLS7_w0i3pCq1ZKDEMrYDJfz87r2sU9kw1zeFQk
\ No newline at end of file diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/kuksa-dbc-feeder.service b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/kuksa-dbc-feeder.service new file mode 100644 index 000000000..dfcbb4df8 --- /dev/null +++ b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/kuksa-dbc-feeder.service @@ -0,0 +1,11 @@ +[Unit] +Description=Eclipse KUKSA.val DBC feeder +Requires=kuksa-val.service can-dev-helper.service +After=kuksa-val.service can-dev-helper.service + +[Service] +ExecStart=/usr/bin/dbcfeeder.py +Restart=on-failure + +[Install] +WantedBy=multi-user.target diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/mapping.yml b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/mapping.yml new file mode 100644 index 000000000..a493168d4 --- /dev/null +++ b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/mapping.yml @@ -0,0 +1,12 @@ +# Mapping Speed +PT_VehicleAvgSpeed: + minupdatedelay: 100 + targets: + Vehicle.Speed: {} + +PT_EngineSpeed: + minupdatedelay: 100 + targets: + Vehicle.Powertrain.CombustionEngine.Engine.Speed: + transform: + math: "floor(x+0.5)" diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder_git.bb b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder_git.bb new file mode 100644 index 000000000..7d3111873 --- /dev/null +++ b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder_git.bb @@ -0,0 +1,59 @@ +SUMMARY = "DBC feeder for KUKSA.val, the KUKSA Vehicle Abstraction Layer" +HOMEPAGE = "https://github.com/eclipse/kuksa.val" +BUGTRACKER = "https://github.com/eclipse/kuksa.val/issues" + +LICENSE = "EPL-2.0" +LIC_FILES_CHKSUM = "file://LICENSE;md5=d9fc0efef5228704e7f5b37f27192723" + +DEPENDS = "python3-setuptools-git-versioning-native" + +require kuksa-val.inc + +SRC_URI += "file://0001-dbc2val-add-installation-mechanism.patch \ + file://0002-dbc2val-usability-improvements.patch \ + file://config.ini \ + file://dbc_feeder.json.token \ + file://mapping.yml \ + file://agl-vcar.dbc \ + file://kuksa-dbc-feeder.service \ +" + +inherit setuptools3 systemd + +SETUPTOOLS_SETUP_PATH = "${S}/kuksa_feeders" + +# This is a bit of a workaround as the sed in distutils.bbclass +# will remove the -S already present in the script otherwise, +# breaking it. +PEP517_INSTALL_PYTHON = "-S python3 -u" + +SYSTEMD_SERVICE:${PN} = "${BPN}.service" + +do_install:append() { + install -d ${D}${sysconfdir}/kuksa-dbc-feeder + install -m 0644 ${WORKDIR}/config.ini ${D}${sysconfdir}/kuksa-dbc-feeder/ + # Token should ideally not be readable by other users. + # The potential for running the feeder as non-root will take some + # investigation. + install -m 0600 ${WORKDIR}/dbc_feeder.json.token ${D}${sysconfdir}/kuksa-dbc-feeder/ + install -m 0644 ${WORKDIR}/mapping.yml ${D}${sysconfdir}/kuksa-dbc-feeder/ + install -m 0644 ${WORKDIR}/agl-vcar.dbc ${D}${sysconfdir}/kuksa-dbc-feeder/ + if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)}; then + install -d ${D}${systemd_system_unitdir} + install -m 0644 ${WORKDIR}/kuksa-dbc-feeder.service ${D}${systemd_system_unitdir} + fi +} + +FILES:${PN} += "${systemd_system_unitdir}" + +RDEPENDS:${PN} += " \ + bash \ + python3-pyserial \ + python3-cantools \ + python3-can \ + python3-can-j1939 \ + python3-pyyaml \ + python3-py-expression-eval \ + kuksa-viss-client \ + can-dev-helper \ +" diff --git a/recipes-connectivity/kuksa-val/kuksa-viss-client_git.bb b/recipes-connectivity/kuksa-val/kuksa-viss-client_git.bb new file mode 100644 index 000000000..3a33e0331 --- /dev/null +++ b/recipes-connectivity/kuksa-val/kuksa-viss-client_git.bb @@ -0,0 +1,26 @@ +SUMMARY = "Python client for KUKSA.val, the KUKSA Vehicle Abstraction Layer" +HOMEPAGE = "https://github.com/eclipse/kuksa.val" +BUGTRACKER = "https://github.com/eclipse/kuksa.val/issues" + +LICENSE = "EPL-2.0" +LIC_FILES_CHKSUM = "file://LICENSE;md5=d9fc0efef5228704e7f5b37f27192723" + +DEPENDS = "python3-setuptools-git-versioning-native" + +require kuksa-val.inc + +inherit setuptools3 + +RDEPENDS:${PN} += " \ + python3-cmd2 \ + python3-importlib-metadata \ + python3-pkg-resources \ + python3-pygments \ + python3-websockets \ +" + +# A script for generating new certificates currently gets shipped inside +# the client module, for now add bash to RDEPENDS to quiet the QA error. +# This should probably be addressed with finer-grained packaging or some +# other change worked out with upstream. +RDEPENDS:${PN} += "bash" diff --git a/recipes-devtools/python/python3-argparse-addons_0.7.0.bb b/recipes-devtools/python/python3-argparse-addons_0.7.0.bb new file mode 100644 index 000000000..e0ff0c3f5 --- /dev/null +++ b/recipes-devtools/python/python3-argparse-addons_0.7.0.bb @@ -0,0 +1,10 @@ +SUMMARY = "Additional Python argparse types and actions." +HOMEPAGE = "https://github.com/eerimoq/argparse_addons" +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://LICENSE;md5=515e9da3e929c7b40dd13458363110a7" + +PYPI_PACKAGE = "argparse_addons" + +SRC_URI[sha256sum] = "f5da0fe676953e39bee7a6d0a9b2f5ccdcbf9d6a6b9929997caf8f6c6b23a5fb" + +inherit pypi setuptools3 diff --git a/recipes-devtools/python/python3-can-j1939_2.0.6.bb b/recipes-devtools/python/python3-can-j1939_2.0.6.bb new file mode 100644 index 000000000..b479340a8 --- /dev/null +++ b/recipes-devtools/python/python3-can-j1939_2.0.6.bb @@ -0,0 +1,13 @@ +SUMMARY = "An implementation of the CAN SAE J1939 standard for Python." +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://LICENSE;md5=32e7309a8200a5f4b7aec6efcfb8e77e" +PYPI_PACKAGE = "can-j1939" + +SRC_URI[sha256sum] = "beda5bf2e2502c4a7d97a989075c56b98e33e49b619ef8054ed13aca911be3d3" + +inherit pypi setuptools3 + +RDEPENDS:${PN} += " \ + python3-can \ + python3-numpy \ +" diff --git a/recipes-devtools/python/python3-cantools_37.0.7.bbappend b/recipes-devtools/python/python3-cantools_37.0.7.bbappend new file mode 100644 index 000000000..a4c6aa3ab --- /dev/null +++ b/recipes-devtools/python/python3-cantools_37.0.7.bbappend @@ -0,0 +1,3 @@ +RDEPENDS:${PN} += "\ + python3-argparse-addons \ +" diff --git a/recipes-devtools/python/python3-py-expression-eval_0.3.14.bb b/recipes-devtools/python/python3-py-expression-eval_0.3.14.bb new file mode 100644 index 000000000..15a295f10 --- /dev/null +++ b/recipes-devtools/python/python3-py-expression-eval_0.3.14.bb @@ -0,0 +1,14 @@ +SUMMARY = "Python Mathematical Expression Evaluator" +HOMEPAGE = "https://github.com/AxiaCore/py-expression-eval" +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://LICENSE;md5=5a9126e7f56a0cf3247050de7f10d0f4" + +# NOTE: Pulling from github.com instead of pypi.org as the tarfiles on +# the latter do not include the LICENSE file. + +SRC_URI = "git://github.com/axiacore/py-expression-eval.git;protocol=https;branch=master" +SRCREV = "e7cfbedb3cdb1c428ae3dfbc967fe43deffa5e64" + +S = "${WORKDIR}/git" + +inherit setuptools3 diff --git a/recipes-devtools/python/python3-setuptools-git-versioning_1.7.4.bb b/recipes-devtools/python/python3-setuptools-git-versioning_1.7.4.bb new file mode 100644 index 000000000..698a3bb62 --- /dev/null +++ b/recipes-devtools/python/python3-setuptools-git-versioning_1.7.4.bb @@ -0,0 +1,17 @@ +SUMMARY = "Use git repo data for building a version number according PEP-440" +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://LICENSE;md5=f22e7cb81b49604c2450680982bdc067" +PYPI_PACKAGE = "setuptools-git-versioning" + +DEPENDS = "python3-six-native" + +SRC_URI[sha256sum] = "be2901afcb7c865e3b500a38183598657fd029a1a72c8d1dfc7fbffb5c227dac" + +inherit pypi setuptools3 + +RDEPENDS:${PN} += " \ + python3-setuptools \ + python3-six \ +" + +BBCLASSEXTEND = "native" diff --git a/recipes-platform/packagegroups/packagegroup-agl-ivi-services.bb b/recipes-platform/packagegroups/packagegroup-agl-ivi-services.bb index 5f52955e1..77f832bc0 100644 --- a/recipes-platform/packagegroups/packagegroup-agl-ivi-services.bb +++ b/recipes-platform/packagegroups/packagegroup-agl-ivi-services.bb @@ -9,4 +9,5 @@ PACKAGES = "\ RDEPENDS:${PN} += "\ kuksa-val \ + kuksa-dbc-feeder \ " |