diff options
| -rw-r--r-- | README.md | 133 |
1 files changed, 33 insertions, 100 deletions
@@ -120,28 +120,43 @@ Supposed Directory Trees of Layers to build meta-renesas/ poky/ +Downloading the Source +-------------------- +You can use repo tool to get all layers which are needed to build AGL Distribution. + +1. Installing Repo. Make sure you have a bin/ in your $HOME and it's included in your $PATH. + $ mkdir ~/bin + $ export PATH=~/bin:$PATH + + Download the repo tool. + $ curl https://storage.googleapis.com/git-repo-downloads/repo > ~/bin/repo + $ chmod a+x ~/bin/repo + +2. Preparing download. Create an empty directory to hold all recipes and build environment. You can make it as any name you like. + $ mkdir WORKING-DIRECTORY + $ cd WORKING-DIRECTORY + +3. Getting all layers. + $ repo init -u https://gerrit.automotivelinux.org/gerrit/AGL/AGL-repo + $ repo sync + Build a QEMU image ------------------ You can build a QEMU image using the following steps: -1. Export TEMPLATECONF to pick up correct configuration for the build - $ export TEMPLATECONF=/full/path/to/meta-agl-demo/conf - -2. Run the following command: - $ source poky/oe-init-build-env +1. Set up environment: You can specify any name for directory which storing all stuffs to build. + $ source meta-agl/scripts/envsetup.sh qemux86-64 [BUILD_DIR] -3. Build the full image of AGL Demo Platform and applications +2. Build the full image of AGL Demo Platform and applications $ bitbake agl-demo-platform -4. Run the emulator - $ cd $BUILD_DIR/tmp/deploy/images/qemex86-64 - $ PATH_TO_POKY/poky/scripts/runqemu qemux86-64 bzImage-qemux86-64.bin \ - agl-demo-platform-qemux86-64.ext3 +3. Run the emulator. The path for the emulator (runqemu) was added during the envsetup. + $ cd tmp/deploy/images/qemex86-64 + $ runqemu bzImage-qemux86-64.bin agl-demo-platform-qemux86-64.ext3 For large screen: - $ PATH_TO_POKY/poky/scripts/runqemu qemux86-64 bzImage-qemux86-64.bin \ - agl-demo-platform-qemux86-64.ext3 \ + $ runqemu bzImage-qemux86-64.bin agl-demo-platform-qemux86-64.ext3 \ bootparams="uvesafb.mode_option=1280x720-32" 5. Some weston samples are available from weston terminal. @@ -149,40 +164,6 @@ You can build a QEMU image using the following steps: Build a R-Car M2 (porter) image ------------------------------- -### Software setup - -NOTE: These instructions are based on GENIVI wiki, [here](http://wiki.projects.genivi.org/index.php/Hardware_Setup_and_Software_Installation/koelsch%26porter). If these didn't work correctly especially around Renesas Binary Packages, please check there and updated instructions. - -#### Getting Source Code and Build image - -1. Create a directory for working, then go to there. - $ mkdir -p $HOME/ANYWHERE_YOU_WANT_TO_WORK_THERE - $ cd $HOME/ANYWHERE_YOU_WANT_TO_WORK_THERE - $ export AGL_TOP=`pwd` - -2. Get the meta data and checkout - $ git clone git://git.yoctoproject.org/poky - $ cd poky - $ git checkout df87cb27efeaea1455f20692f9f1397c6fcab254 - $ cd - - $ git clone git://git.openembedded.org/meta-openembedded - $ cd meta-openembedded - $ git checkout 9efaed99125b1c4324663d9a1b2d3319c74e7278 - $ cd - - $ git clone https://gerrit.automotivelinux.org/gerrit/AGL/meta-agl - $ cd meta-agl - $ git checkout 4d71b6fbe454ff51342ab1eb6791fad66ba98c3e - $ cd - - $ git clone https://github.com/meta-qt5/meta-qt5.git - $ cd meta-qt5 - $ git checkout adeca0db212d61a933d7952ad44ea1064cfca747 - $ cd - - $ git clone https://gerrit.automotivelinux.org/gerrit/AGL/meta-renesas - $ cd meta-renesas - $ git checkout bf30de66badcac7ef82d3758aa44c116ee791a28 - $ cd - - $ git clone https://gerrit.automotivelinux.org/gerrit/AGL/meta-agl-demo - #### Obtain and Install Renesas Graphics/Multimedia Drivers 1. Download packages from Renesas @@ -196,64 +177,16 @@ NOTE: These instructions are based on GENIVI wiki, [here](http://wiki.projects.g * Related Linux drivers > r-car_series_evaluation_software_package_of_linux_drivers-*.zip -2. Unzip the two downloads into a temporary directory. - $ cd $AGL_TOP - $ mkdir binary-tmp - $ cd binary-tmp - $ unzip PATH_TO_DOWNLOAD/r-car_series_evaluation_software_package_for_linux-*.zip - $ unzip PATH_TO_DOWNLOAD/r-car_series_evaluation_software_package_of_linux_drivers-*.zip - - After this step there should be two files in binary-tmp: - * Multimedia and Graphics library - > R-Car_Series_Evaluation_Software_Package_for_Linux-*.tar.gz - * Related Linux drivers - > R-Car_Series_Evaluation_Software_Package_of_Linux_Drivers-*.tar.gz - -3. Copy the graphics acceleration drivers by shell script. - $ cd $AGL_TOP/meta-renesas/meta-rcar-gen2 - $ ./copy_gfx_software_porter.sh ../../binary-tmp - -4. Copy the multimedia acceleration drivers by shell script. - $ cd $AGL_TOP/meta-renesas/meta-rcar-gen2 - $ ./copy_mm_software_lcb.sh ../../binary-tmp + These 2 files from Renesas should be store in your download directory in $HOME. (e.g. $HOME/Downloads) If not, envsetup.sh in below will stop and show some instruction, then please follow it. #### Build from the Source code You can build a R-Car2 M2 (porter) image using the following steps: -1. Export TEMPLATECONF to pick up correct configuration for the build - $ export TEMPLATECONF=$AGL_TOP/meta-renesas/meta-rcar-gen2/conf - -2. Run the following command: - $ cd $AGL_TOP - $ source poky/oe-init-build-env - - (Optional) If you want to use multimedia accelerations, confirm your - conf/bblayer.conf has a entry of `meta-openembedded/meta-multimedia` - in BBLAYERS because packagegroup-rcar-gen2-multimedia needs some extra - packages there. - -3. Add 2 layers to bblayer.conf, - > meta-openembedded/meta-ruby - > meta-qt5 - - So it looks something like, - BBLAYERS ?= " \ - ##OEROOT##/meta \ - ##OEROOT##/meta-yocto \ - ##OEROOT##/meta-yocto-bsp \ - ##OEROOT##/../meta-agl/meta-ivi-common \ - ##OEROOT##/../meta-agl/meta-agl \ - ##OEROOT##/../meta-openembedded/meta-oe \ - ##OEROOT##/../meta-openembedded/meta-multimedia \ - ##OEROOT##/../meta-openembedded/meta-ruby \ - ##OEROOT##/../meta-qt5 \ - ##OEROOT##/../meta-renesas \ - ##OEROOT##/../meta-renesas/meta-rcar-gen2 \ - ##OEROOT##/../meta-agl-demo \ - " +1. Set up environment: You can specify any name for directory which storing all stuffs to build. + $ source meta-agl/scripts/envsetup.sh porter [BUILD_DIR] -4. (Optional) If you want to install various Qt5 examples, add below +2. (Optional) If you want to install various Qt5 examples, add below configuration to your local.conf. IMAGE_INSTALL_append = " \ packagegroup-agl-demo-qt-examples \ @@ -266,7 +199,7 @@ You can build a R-Car2 M2 (porter) image using the following steps: If not, programs should not launch by error, 'EGL not available'. -5. (Optional) If you want to use multimedia accelerations, uncomment +3. (Optional) If you want to use multimedia accelerations, uncomment manually 4 `IMAGE_INSTALL_append_porter` in conf/local.conf. #IMAGE_INSTALL_append_porter = " \ # gstreamer1.0-plugins-bad-waylandsink \ @@ -294,7 +227,7 @@ You can build a R-Car2 M2 (porter) image using the following steps: The version of GStreamer1.0 which AGL distro use, will be changed to 1.2.3 (meta-renesas prefers) from 1.4.1(meta-agl default) by this switch. -6. Build the full image of AGL Demo Platform and applications +4. Build the full image of AGL Demo Platform and applications $ bitbake agl-demo-platform ### Deployment (SDCARD) |