summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--recipes-connectivity/kuksa-val/can-dev-helper/can-dev-helper.service2
-rw-r--r--recipes-connectivity/kuksa-val/can-dev-helper/can-dev-helper.sh4
-rw-r--r--recipes-connectivity/kuksa-val/kuksa-can-provider-conf-control-panel.bb25
-rw-r--r--recipes-connectivity/kuksa-val/kuksa-can-provider-conf-control-panel/kuksa-can-provider.control-panel (renamed from recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-control-panel/kuksa-dbc-feeder.control-panel)2
-rw-r--r--recipes-connectivity/kuksa-val/kuksa-can-provider-conf-gw-control-panel.bb25
-rw-r--r--recipes-connectivity/kuksa-val/kuksa-can-provider-conf-gw-control-panel/kuksa-can-provider.gw-control-panel (renamed from recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-control-panel/kuksa-dbc-feeder.gw-control-panel)2
-rw-r--r--recipes-connectivity/kuksa-val/kuksa-can-provider-conf-gw-hardware.bb32
-rw-r--r--recipes-connectivity/kuksa-val/kuksa-can-provider-conf-gw-hardware/config.ini.gw-hardware (renamed from recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware/config.ini.gw-hardware)4
-rw-r--r--recipes-connectivity/kuksa-val/kuksa-can-provider-conf-gw-hardware/kuksa-can-provider-can1.service (renamed from recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware/kuksa-dbc-feeder-can1.service)4
-rw-r--r--recipes-connectivity/kuksa-val/kuksa-can-provider-conf-gw-hardware/kuksa-can-provider.gw-hardware3
-rw-r--r--recipes-connectivity/kuksa-val/kuksa-can-provider/0001-dbc2val-add-installation-mechanism.patch (renamed from recipes-connectivity/kuksa-val/kuksa-dbc-feeder/0001-dbc2val-add-installation-mechanism.patch)39
-rw-r--r--recipes-connectivity/kuksa-val/kuksa-can-provider/0002-dbc2val-usability-improvements.patch80
-rw-r--r--recipes-connectivity/kuksa-val/kuksa-can-provider/0003-dbc2val-fix-token-file-configuration-option.patch (renamed from recipes-connectivity/kuksa-val/kuksa-dbc-feeder/0003-dbc2val-fix-token-file-configuration-option.patch)22
-rw-r--r--recipes-connectivity/kuksa-val/kuksa-can-provider/0004-Enable-val2dbc-for-sensor-values.patch174
-rw-r--r--recipes-connectivity/kuksa-val/kuksa-can-provider/agl-vcar.dbc (renamed from recipes-connectivity/kuksa-val/kuksa-dbc-feeder/agl-vcar.dbc)0
-rw-r--r--recipes-connectivity/kuksa-val/kuksa-can-provider/can-provider.json.token (renamed from recipes-connectivity/kuksa-val/kuksa-dbc-feeder/dbc_feeder.json.token)0
-rw-r--r--recipes-connectivity/kuksa-val/kuksa-can-provider/can-provider.token (renamed from recipes-connectivity/kuksa-val/kuksa-dbc-feeder/dbc_feeder.token)0
-rw-r--r--recipes-connectivity/kuksa-val/kuksa-can-provider/config.ini (renamed from recipes-connectivity/kuksa-val/kuksa-dbc-feeder/config.ini)4
-rw-r--r--recipes-connectivity/kuksa-val/kuksa-can-provider/dbc_default_values.json (renamed from recipes-connectivity/kuksa-val/kuksa-dbc-feeder/dbc_default_values.json)0
-rw-r--r--recipes-connectivity/kuksa-val/kuksa-can-provider/kuksa-can-provider.default3
-rw-r--r--recipes-connectivity/kuksa-val/kuksa-can-provider/kuksa-can-provider.service (renamed from recipes-connectivity/kuksa-val/kuksa-dbc-feeder/kuksa-dbc-feeder.service)2
-rw-r--r--recipes-connectivity/kuksa-val/kuksa-can-provider/mapping.yml (renamed from recipes-connectivity/kuksa-val/kuksa-dbc-feeder/mapping.yml)0
-rw-r--r--recipes-connectivity/kuksa-val/kuksa-can-provider_git.bb (renamed from recipes-connectivity/kuksa-val/kuksa-dbc-feeder_git.bb)40
-rw-r--r--recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-control-panel.bb25
-rw-r--r--recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-control-panel.bb25
-rw-r--r--recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware.bb32
-rw-r--r--recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware/kuksa-dbc-feeder.gw-hardware3
-rw-r--r--recipes-connectivity/kuksa-val/kuksa-dbc-feeder/0002-dbc2val-usability-improvements.patch76
-rw-r--r--recipes-connectivity/kuksa-val/kuksa-dbc-feeder/0004-Enable-val2dbc-for-sensor-values.patch142
-rw-r--r--recipes-connectivity/kuksa-val/kuksa-dbc-feeder/kuksa-dbc-feeder.default3
-rw-r--r--recipes-platform/images/agl-gateway-demo-preconfigured.bb2
-rw-r--r--recipes-platform/images/agl-gateway-demo.bb2
-rw-r--r--recipes-platform/images/agl-ivi-demo-control-panel-preconfigured-gateway.bb2
-rw-r--r--recipes-platform/packagegroups/packagegroup-agl-kuksa-val-databroker.bb2
34 files changed, 410 insertions, 371 deletions
diff --git a/recipes-connectivity/kuksa-val/can-dev-helper/can-dev-helper.service b/recipes-connectivity/kuksa-val/can-dev-helper/can-dev-helper.service
index 04e6a9c35..cc3b629a7 100644
--- a/recipes-connectivity/kuksa-val/can-dev-helper/can-dev-helper.service
+++ b/recipes-connectivity/kuksa-val/can-dev-helper/can-dev-helper.service
@@ -1,6 +1,6 @@
[Unit]
Description=CAN interface helper
-Before=kuksa-dbc-feeder.service
+Before=kuksa-can-provider.service
[Service]
ExecStart=/usr/sbin/can-dev-helper.sh
diff --git a/recipes-connectivity/kuksa-val/can-dev-helper/can-dev-helper.sh b/recipes-connectivity/kuksa-val/can-dev-helper/can-dev-helper.sh
index d57604c07..ecac5cb73 100644
--- a/recipes-connectivity/kuksa-val/can-dev-helper/can-dev-helper.sh
+++ b/recipes-connectivity/kuksa-val/can-dev-helper/can-dev-helper.sh
@@ -2,7 +2,7 @@
#
# Script to bring up CAN interface configured for the kuksa.val
-# CAN feeder in /etc/kuksa-dbc-feeder/dbc_feeder.ini as vcan
+# CAN provider in /etc/kuksa-can-provider/dbc_feeder.ini as vcan
# interfaces if no physical interface is present.
#
@@ -14,7 +14,7 @@ vcan_up() {
fi
}
-CONF=/etc/kuksa-dbc-feeder/config.ini
+CONF=/etc/kuksa-can-provider/config.ini
if [ $# -gt 0 ]; then
CONF=$1
fi
diff --git a/recipes-connectivity/kuksa-val/kuksa-can-provider-conf-control-panel.bb b/recipes-connectivity/kuksa-val/kuksa-can-provider-conf-control-panel.bb
new file mode 100644
index 000000000..eba5f84cc
--- /dev/null
+++ b/recipes-connectivity/kuksa-val/kuksa-can-provider-conf-control-panel.bb
@@ -0,0 +1,25 @@
+SUMMARY = "KUKSA.val CAN provider configuration for gateway demo control panel"
+
+LICENSE = "Apache-2.0"
+LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/Apache-2.0;md5=89aea4e17d99a7cacdbeed46a0096b10"
+
+SRC_URI = "file://kuksa-can-provider.control-panel"
+
+S = "${WORKDIR}"
+
+inherit update-alternatives
+
+do_compile[noexec] = "1"
+
+do_install() {
+ install -d ${D}${sysconfdir}/default
+ install -m 0644 ${WORKDIR}/kuksa-can-provider.control-panel ${D}${sysconfdir}/default/
+}
+
+ALTERNATIVE_LINK_NAME[kuksa-can-provider.env] = "${sysconfdir}/default/kuksa-can-provider"
+
+RPROVIDES:${PN} = "kuksa-can-provider.env"
+ALTERNATIVE:${PN} = "kuksa-can-provider.env"
+ALTERNATIVE_TARGET_${PN} = "${sysconfdir}/default/kuksa-can-provider.control-panel"
+
+RDEPENDS:${PN} += "kuksa-can-provider"
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-control-panel/kuksa-dbc-feeder.control-panel b/recipes-connectivity/kuksa-val/kuksa-can-provider-conf-control-panel/kuksa-can-provider.control-panel
index 8e73a890d..613f483ca 100644
--- a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-control-panel/kuksa-dbc-feeder.control-panel
+++ b/recipes-connectivity/kuksa-val/kuksa-can-provider-conf-control-panel/kuksa-can-provider.control-panel
@@ -1,4 +1,4 @@
# Leave DBC input disabled until cruise support is added to the
# control panel simulator
-EXTRA_ARGS="--val2dbc --no-dbc2val --dbc-default /etc/kuksa-dbc-feeder/dbc_default_values.json"
+EXTRA_ARGS="--val2dbc --no-dbc2val --dbc-default /etc/kuksa-can-provider/dbc_default_values.json"
#LOG_LEVEL=debug
diff --git a/recipes-connectivity/kuksa-val/kuksa-can-provider-conf-gw-control-panel.bb b/recipes-connectivity/kuksa-val/kuksa-can-provider-conf-gw-control-panel.bb
new file mode 100644
index 000000000..02483a87e
--- /dev/null
+++ b/recipes-connectivity/kuksa-val/kuksa-can-provider-conf-gw-control-panel.bb
@@ -0,0 +1,25 @@
+SUMMARY = "KUKSA.val CAN provider configuration for gateway demo"
+
+LICENSE = "Apache-2.0"
+LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/Apache-2.0;md5=89aea4e17d99a7cacdbeed46a0096b10"
+
+SRC_URI = "file://kuksa-can-provider.gw-control-panel"
+
+S = "${WORKDIR}"
+
+inherit update-alternatives
+
+do_compile[noexec] = "1"
+
+do_install() {
+ install -d ${D}${sysconfdir}/default
+ install -m 0644 ${WORKDIR}/kuksa-can-provider.gw-control-panel ${D}${sysconfdir}/default/
+}
+
+ALTERNATIVE_LINK_NAME[kuksa-can-provider.env] = "${sysconfdir}/default/kuksa-can-provider"
+
+RPROVIDES:${PN} = "kuksa-can-provider.env"
+ALTERNATIVE:${PN} = "kuksa-can-provider.env"
+ALTERNATIVE_TARGET_${PN} = "${sysconfdir}/default/kuksa-can-provider.gw-control-panel"
+
+RDEPENDS:${PN} += "kuksa-can-provider"
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-control-panel/kuksa-dbc-feeder.gw-control-panel b/recipes-connectivity/kuksa-val/kuksa-can-provider-conf-gw-control-panel/kuksa-can-provider.gw-control-panel
index d6d2e6073..a01dd9f07 100644
--- a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-control-panel/kuksa-dbc-feeder.gw-control-panel
+++ b/recipes-connectivity/kuksa-val/kuksa-can-provider-conf-gw-control-panel/kuksa-can-provider.gw-control-panel
@@ -1,4 +1,4 @@
# Leave DBC output disabled until cruise support is added to the
# control panel simulator
-EXTRA_ARGS="--no-val2dbc --dbc2val --dbc-default /etc/kuksa-dbc-feeder/dbc_default_values.json"
+EXTRA_ARGS="--no-val2dbc --dbc2val --dbc-default /etc/kuksa-can-provider/dbc_default_values.json"
#LOG_LEVEL=debug
diff --git a/recipes-connectivity/kuksa-val/kuksa-can-provider-conf-gw-hardware.bb b/recipes-connectivity/kuksa-val/kuksa-can-provider-conf-gw-hardware.bb
new file mode 100644
index 000000000..1275235f5
--- /dev/null
+++ b/recipes-connectivity/kuksa-val/kuksa-can-provider-conf-gw-hardware.bb
@@ -0,0 +1,32 @@
+SUMMARY = "KUKSA.val CAN provider configuration for gateway demo (secondary CAN interface)"
+
+LICENSE = "Apache-2.0"
+LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/Apache-2.0;md5=89aea4e17d99a7cacdbeed46a0096b10"
+
+SRC_URI = "file://kuksa-can-provider.gw-hardware \
+ file://config.ini.gw-hardware \
+ file://kuksa-can-provider-can1.service \
+"
+
+S = "${WORKDIR}"
+
+inherit systemd update-alternatives
+
+SYSTEMD_SERVICE:${PN} = "kuksa-can-provider-can1.service"
+
+do_compile[noexec] = "1"
+
+do_install() {
+ install -d ${D}${sysconfdir}/default
+ install -m 0644 ${WORKDIR}/kuksa-can-provider.gw-hardware ${D}${sysconfdir}/default/
+ install -d ${D}${sysconfdir}/kuksa-can-provider
+ install -m 0644 ${WORKDIR}/config.ini.gw-hardware ${D}${sysconfdir}/kuksa-can-provider/
+ if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)}; then
+ install -d ${D}${systemd_system_unitdir}
+ install -m 0644 ${WORKDIR}/kuksa-can-provider-can1.service ${D}${systemd_system_unitdir}
+ fi
+}
+
+FILES:${PN} += "${systemd_system_unitdir}"
+
+RDEPENDS:${PN} += "kuksa-can-provider vss-agl-gw-hardware"
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware/config.ini.gw-hardware b/recipes-connectivity/kuksa-val/kuksa-can-provider-conf-gw-hardware/config.ini.gw-hardware
index ee3541a5f..6f29d1213 100644
--- a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware/config.ini.gw-hardware
+++ b/recipes-connectivity/kuksa-val/kuksa-can-provider-conf-gw-hardware/config.ini.gw-hardware
@@ -19,7 +19,7 @@ tls = True
root_ca_path=/etc/kuksa-val/CA.pem
# Token file for authorization.
-token = /etc/kuksa-dbc-feeder/dbc_feeder.token
+token = /etc/kuksa-can-provider/dbc_feeder.token
[can]
# CAN port
@@ -27,4 +27,4 @@ port = can1
# Enable SAE-J1939 Mode. False: ignore
j1939 = False
# DBC file used to parse CAN messages
-dbcfile = /etc/kuksa-dbc-feeder/agl-vcar.dbc
+dbcfile = /etc/kuksa-can-provider/agl-vcar.dbc
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware/kuksa-dbc-feeder-can1.service b/recipes-connectivity/kuksa-val/kuksa-can-provider-conf-gw-hardware/kuksa-can-provider-can1.service
index 6f123dd57..6eb5b034e 100644
--- a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware/kuksa-dbc-feeder-can1.service
+++ b/recipes-connectivity/kuksa-val/kuksa-can-provider-conf-gw-hardware/kuksa-can-provider-can1.service
@@ -1,10 +1,10 @@
[Unit]
-Description=Eclipse KUKSA.val DBC feeder (can1)
+Description=Eclipse KUKSA.val CAN provider (can1)
Requires=kuksa-databroker.service can-dev-helper.service
After=kuksa-databroker.service can-dev-helper.service
[Service]
-EnvironmentFile=-/etc/default/kuksa-dbc-feeder.gw-hardware
+EnvironmentFile=-/etc/default/kuksa-can-provider.gw-hardware
ExecStart=/usr/bin/dbcfeeder.py $EXTRA_ARGS
Restart=on-failure
diff --git a/recipes-connectivity/kuksa-val/kuksa-can-provider-conf-gw-hardware/kuksa-can-provider.gw-hardware b/recipes-connectivity/kuksa-val/kuksa-can-provider-conf-gw-hardware/kuksa-can-provider.gw-hardware
new file mode 100644
index 000000000..7a11d5cad
--- /dev/null
+++ b/recipes-connectivity/kuksa-val/kuksa-can-provider-conf-gw-hardware/kuksa-can-provider.gw-hardware
@@ -0,0 +1,3 @@
+# DBC input for steering wheel, output for HVAC
+EXTRA_ARGS="--val2dbc --dbc2val --dbc-default /etc/kuksa-can-provider/dbc_default_values.json --config /etc/kuksa-can-provider/config.ini.gw-hardware"
+#LOG_LEVEL=debug
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/0001-dbc2val-add-installation-mechanism.patch b/recipes-connectivity/kuksa-val/kuksa-can-provider/0001-dbc2val-add-installation-mechanism.patch
index 58ad32593..6a9c1ba14 100644
--- a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/0001-dbc2val-add-installation-mechanism.patch
+++ b/recipes-connectivity/kuksa-val/kuksa-can-provider/0001-dbc2val-add-installation-mechanism.patch
@@ -1,7 +1,7 @@
-From d23ce9baabaabff17a4bf6050462edd11feb7cef Mon Sep 17 00:00:00 2001
+From 73dd680486b72d15d6f4c7aa129219ecdbcbd7b2 Mon Sep 17 00:00:00 2001
From: Scott Murray <scott.murray@konsulko.com>
Date: Wed, 19 Apr 2023 15:55:01 -0400
-Subject: [PATCH] dbc2val: add installation mechanism
+Subject: [PATCH 1/4] dbc2val: add installation mechanism
Add setup.py and setup.cfg to allow installing the dbcfeederlib
module and dbcfeeder.py in a way suitable for packaging.
@@ -9,32 +9,30 @@ module and dbcfeeder.py in a way suitable for packaging.
Upstream-Status: pending
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
-
-
---
- dbc2val/setup.cfg | 30 ++++++++++++++++++++++++++++++
- dbc2val/setup.py | 14 ++++++++++++++
+ setup.cfg | 30 ++++++++++++++++++++++++++++++
+ setup.py | 14 ++++++++++++++
2 files changed, 44 insertions(+)
- create mode 100644 dbc2val/setup.cfg
- create mode 100644 dbc2val/setup.py
+ create mode 100644 setup.cfg
+ create mode 100644 setup.py
-diff --git a/dbc2val/setup.cfg b/dbc2val/setup.cfg
+diff --git a/setup.cfg b/setup.cfg
new file mode 100644
-index 0000000..03dc6d6
+index 0000000..cb64407
--- /dev/null
-+++ b/dbc2val/setup.cfg
++++ b/setup.cfg
@@ -0,0 +1,30 @@
+[metadata]
+name = dbcfeeder
+author = Sebastian Schildt, Naresh Nayak, Wenwen Chen
+author_email = sebastian.schildt@de.bosch.com, naresh.nayak@de.bosch.com, wenwen.chen@de.bosch.com
-+description = kuksa.val DBC feeder
++description = KUKSA.val CAN provider
+long_description = file:README.md
+long_description_content_type = text/markdown
-+url=https://github.com/eclipse/kuksa.val.feeders
++url=https://github.com/eclipse-kuksa/kuksa-can-provider
+project_urls=
-+ Source=https://github.com/eclipse/kuksa.val.feeders/tree/master/dbc2val
-+ Bug Tracker=https://github.com/eclipse/kuksa.val.feeders/issues
++ Source=https://github.com/eclipse-kuksa/kuksa-can-provider
++ Bug Tracker=https://github.com/eclipse-kuksa/kuksa-can-provider/issues
+classifiers =
+ Intended Audience :: Developers
+ Development Status :: 3 - Alpha
@@ -44,7 +42,7 @@ index 0000000..03dc6d6
+ Operating System :: OS Independent
+ Topic :: Software Development
+
-+license_file = ../LICENSE.txt
++license_file = LICENSE
+
+[options]
+python_requires = >=3.6
@@ -54,11 +52,11 @@ index 0000000..03dc6d6
+ kuksa-client
+packages=dbcfeederlib
+scripts=dbcfeeder.py
-diff --git a/dbc2val/setup.py b/dbc2val/setup.py
+diff --git a/setup.py b/setup.py
new file mode 100644
-index 0000000..65f9157
+index 0000000..c5fb2b7
--- /dev/null
-+++ b/dbc2val/setup.py
++++ b/setup.py
@@ -0,0 +1,14 @@
+from setuptools import setup
+
@@ -74,3 +72,6 @@ index 0000000..65f9157
+ },
+ setup_requires=['setuptools-git-versioning'],
+)
+--
+2.44.0
+
diff --git a/recipes-connectivity/kuksa-val/kuksa-can-provider/0002-dbc2val-usability-improvements.patch b/recipes-connectivity/kuksa-val/kuksa-can-provider/0002-dbc2val-usability-improvements.patch
new file mode 100644
index 000000000..91a309240
--- /dev/null
+++ b/recipes-connectivity/kuksa-val/kuksa-can-provider/0002-dbc2val-usability-improvements.patch
@@ -0,0 +1,80 @@
+From 2e4e1f9147f1ebe5b545ae0cab41341e3abb00ae Mon Sep 17 00:00:00 2001
+From: Scott Murray <scott.murray@konsulko.com>
+Date: Sat, 15 Jun 2024 13:13:17 -0400
+Subject: [PATCH 2/4] dbc2val: usability improvements
+
+Changes:
+- Tweaked default configuration file search path to better match
+ Linux FHS. First look for a config.ini or dbc_feeder.ini in
+ /etc/kuksa-can-provider, then fall back to /etc/dbc_feeder.ini
+ before using trying other possible paths.
+- Add catching of exceptions around CAN device opening so that the
+ script can exit cleanly with an error message if the device is
+ not available.
+- Tweaked DBC default value file command line argument parsing so
+ that it does not attempt to fallback to "dbc_default_values.json"
+ in the current working directory. That likely works for upstream
+ test scenarios, but prevents running on a target.
+
+Upstream-Status: pending
+
+Signed-off-by: Scott Murray <scott.murray@konsulko.com>
+---
+ dbcfeeder.py | 19 +++++++++++++++----
+ 1 file changed, 15 insertions(+), 4 deletions(-)
+
+diff --git a/dbcfeeder.py b/dbcfeeder.py
+index a1ef174..c252503 100755
+--- a/dbcfeeder.py
++++ b/dbcfeeder.py
+@@ -144,7 +144,11 @@ class Feeder:
+ whitelisted_frame_ids.append(filter.can_id) # type: ignore
+ elm2canbridge.elm2canbridge(canport, self._elmcan_config, whitelisted_frame_ids)
+
+- self._reader.start()
++ try:
++ self._reader.start()
++ except:
++ log.error("Could not open %s, exiting", canport)
++ sys.exit(-1)
+
+ receiver = threading.Thread(target=self._run_receiver)
+ receiver.start()
+@@ -165,7 +169,12 @@ class Feeder:
+ # For now creating another bus
+ # Maybe support different buses for downstream/upstream in the future
+
+- self._canclient = CANClient(interface="socketcan", channel=canport, can_fd=can_fd)
++ self._canclient = None
++ try:
++ self._canclient = CANClient(interface="socketcan", channel=canport, can_fd=can_fd)
++ except:
++ log.error("Could not open %s, exiting", canport)
++ sys.exit(-1)
+
+ transmitter = threading.Thread(target=self._run_transmitter)
+ transmitter.start()
+@@ -335,8 +344,10 @@ def _parse_config(filename: str) -> configparser.ConfigParser:
+ configfile = filename
+ else:
+ config_candidates = [
+- "/config/dbc_feeder.ini",
++ "/etc/kuksa-can-provider/config.ini",
++ "/etc/kuksa-can-provider/dbc_feeder.ini",
+ "/etc/dbc_feeder.ini",
++ "/config/dbc_feeder.ini",
+ "config/dbc_feeder.ini",
+ ]
+ for candidate in config_candidates:
+@@ -534,7 +545,7 @@ def main(argv):
+ elif os.environ.get("DBC_DEFAULT_FILE"):
+ dbc_default = os.environ.get("DBC_DEFAULT_FILE")
+ else:
+- dbc_default = config.get(CONFIG_SECTION_CAN, CONFIG_OPTION_DBC_DEFAULT_FILE, fallback="dbc_default_values.json")
++ dbc_default = config.get(CONFIG_SECTION_CAN, CONFIG_OPTION_DBC_DEFAULT_FILE, fallback=None)
+
+ if args.mapping:
+ mappingfile = args.mapping
+--
+2.44.0
+
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/0003-dbc2val-fix-token-file-configuration-option.patch b/recipes-connectivity/kuksa-val/kuksa-can-provider/0003-dbc2val-fix-token-file-configuration-option.patch
index aae8b3dc0..faf94e0af 100644
--- a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/0003-dbc2val-fix-token-file-configuration-option.patch
+++ b/recipes-connectivity/kuksa-val/kuksa-can-provider/0003-dbc2val-fix-token-file-configuration-option.patch
@@ -1,7 +1,7 @@
-From dc20da27a73141b04cc6b0ce5d74e547d6fc7256 Mon Sep 17 00:00:00 2001
+From 0b5822c6a8f8fa489bc7ae67f91284ac150f6518 Mon Sep 17 00:00:00 2001
From: Scott Murray <scott.murray@konsulko.com>
-Date: Mon, 8 May 2023 14:58:06 -0400
-Subject: [PATCH] dbc2val: fix token file configuration option
+Date: Sat, 15 Jun 2024 13:18:08 -0400
+Subject: [PATCH 3/4] dbc2val: fix token file configuration option
The client library changed the token option name to
'token_or_tokenfile', update things to match so that token
@@ -10,16 +10,15 @@ location can be configured again for dbcfeeder.py.
Upstream-Status: pending
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
-
---
- dbc2val/dbcfeederlib/serverclientwrapper.py | 2 +-
+ dbcfeederlib/serverclientwrapper.py | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/dbc2val/dbcfeederlib/serverclientwrapper.py b/dbc2val/dbcfeederlib/serverclientwrapper.py
-index 1219a76..63bc12e 100644
---- a/dbc2val/dbcfeederlib/serverclientwrapper.py
-+++ b/dbc2val/dbcfeederlib/serverclientwrapper.py
-@@ -59,7 +59,7 @@ class ServerClientWrapper(clientwrapper.ClientWrapper):
+diff --git a/dbcfeederlib/serverclientwrapper.py b/dbcfeederlib/serverclientwrapper.py
+index 498e1b6..fa43d28 100644
+--- a/dbcfeederlib/serverclientwrapper.py
++++ b/dbcfeederlib/serverclientwrapper.py
+@@ -56,7 +56,7 @@ class ServerClientWrapper(clientwrapper.ClientWrapper):
self._client_config["insecure"] = not self._tls
# Do not set token if it is empty to allow default client lib info to be used
if self._token_path != "":
@@ -28,3 +27,6 @@ index 1219a76..63bc12e 100644
if self._root_ca_path:
self._client_config['cacertificate'] = self._root_ca_path
+--
+2.44.0
+
diff --git a/recipes-connectivity/kuksa-val/kuksa-can-provider/0004-Enable-val2dbc-for-sensor-values.patch b/recipes-connectivity/kuksa-val/kuksa-can-provider/0004-Enable-val2dbc-for-sensor-values.patch
new file mode 100644
index 000000000..e45fb4cf5
--- /dev/null
+++ b/recipes-connectivity/kuksa-val/kuksa-can-provider/0004-Enable-val2dbc-for-sensor-values.patch
@@ -0,0 +1,174 @@
+From 937218a357ac1914fe410cf3ad31a67d54a63270 Mon Sep 17 00:00:00 2001
+From: Scott Murray <scott.murray@konsulko.com>
+Date: Mon, 17 Jun 2024 17:07:44 -0400
+Subject: [PATCH 4/4] Enable val2dbc for sensor values
+
+Rework to allow val2dbc mode to write out sensor values in
+addition to actuator target values.
+
+Upstream-Status: pending
+
+Signed-off-by: Scott Murray <scott.murray@konsulko.com>
+---
+ dbcfeeder.py | 8 ++++++--
+ dbcfeederlib/databrokerclientwrapper.py | 18 ++++++++++++------
+ dbcfeederlib/dbc2vssmapper.py | 21 ++++++++++-----------
+ dbcfeederlib/serverclientwrapper.py | 2 +-
+ mapping/README.md | 2 --
+ 5 files changed, 29 insertions(+), 22 deletions(-)
+
+diff --git a/dbcfeeder.py b/dbcfeeder.py
+index c252503..c1e20c4 100755
+--- a/dbcfeeder.py
++++ b/dbcfeeder.py
+@@ -289,19 +289,23 @@ class Feeder:
+ log.debug("Processing %d VSS Data Entry updates", len(updates))
+ dbc_signal_names: Set[str] = set()
+ for update in updates:
++ value = None
+ if update.entry.value is not None:
+- # This should never happen as we do not subscribe to current value
+ log.warning(
+ "Current value for %s is now: %s of type %s",
+ update.entry.path, update.entry.value.value, type(update.entry.value.value)
+ )
++ value = update.entry.value.value
+
+ if update.entry.actuator_target is not None:
+ log.debug(
+ "Target value for %s is now: %s of type %s",
+ update.entry.path, update.entry.actuator_target, type(update.entry.actuator_target.value)
+ )
+- affected_signals = self._mapper.handle_update(update.entry.path, update.entry.actuator_target.value)
++ value = update.entry.actuator_target.value
++
++ if value != None:
++ affected_signals = self._mapper.handle_update(update.entry.path, value)
+ dbc_signal_names.update(affected_signals)
+
+ messages_to_send: Set[Message] = set()
+diff --git a/dbcfeederlib/databrokerclientwrapper.py b/dbcfeederlib/databrokerclientwrapper.py
+index 716ee6d..db2b80a 100644
+--- a/dbcfeederlib/databrokerclientwrapper.py
++++ b/dbcfeederlib/databrokerclientwrapper.py
+@@ -199,14 +199,20 @@ class DatabrokerClientWrapper(clientwrapper.ClientWrapper):
+ def supports_subscription(self) -> bool:
+ return True
+
+- async def subscribe(self, vss_names: List[str], callback):
++ async def subscribe(self, vss_entries: dict[str, str], callback):
+ """Create a subscription and invoke the callback when data received."""
+ entries: List[SubscribeEntry] = []
+- for name in vss_names:
+- # Always subscribe to target
+- subscribe_entry = SubscribeEntry(name, View.FIELDS, [Field.ACTUATOR_TARGET])
+- log.info("Subscribe entry: %s", subscribe_entry)
+- entries.append(subscribe_entry)
++ for name, signal_type in vss_entries.items():
++ if signal_type == "actuator":
++ subscribe_entry = SubscribeEntry(name, View.FIELDS, [Field.ACTUATOR_TARGET])
++ log.info("Subscribe entry: %s", subscribe_entry)
++ entries.append(subscribe_entry)
++ if signal_type == "sensor":
++ subscribe_entry = SubscribeEntry(name, View.FIELDS, [Field.VALUE])
++ log.info("Subscribe entry: %s", subscribe_entry)
++ entries.append(subscribe_entry)
++ if not entries:
++ return
+
+ # If there is a path VSSClient will request a secure connection
+ if self._tls and self._root_ca_path:
+diff --git a/dbcfeederlib/dbc2vssmapper.py b/dbcfeederlib/dbc2vssmapper.py
+index 218f693..2be5e98 100644
+--- a/dbcfeederlib/dbc2vssmapper.py
++++ b/dbcfeederlib/dbc2vssmapper.py
+@@ -69,12 +69,13 @@ class VSSMapping:
+ parser: Parser = Parser()
+
+ def __init__(self, vss_name: str, dbc_name: str, transform: dict, interval_ms: int,
+- on_change: bool, datatype: str, description: str):
++ on_change: bool, signal_type: str, datatype: str, description: str):
+ self.vss_name = vss_name
+ self.dbc_name = dbc_name
+ self.transform = transform
+ self.interval_ms = interval_ms
+ self.on_change = on_change
++ self.signal_type = signal_type
+ self.datatype = datatype
+ self.description = description
+ # For time comparison (interval_ms) we store last value used for comparison. Unit seconds.
+@@ -347,7 +348,7 @@ class Mapper(DBCParser):
+ if can_signal_name not in self._dbc2vss_mapping:
+ self._dbc2vss_mapping[can_signal_name] = []
+ mapping_entry = VSSMapping(expanded_name, can_signal_name, transformation_definition, interval, on_change,
+- node["datatype"], node["description"])
++ node["type"], node["datatype"], node["description"])
+ self._dbc2vss_mapping[can_signal_name].append(mapping_entry)
+
+ for msg_def in self.get_messages_for_signal(can_signal_name):
+@@ -398,7 +399,7 @@ class Mapper(DBCParser):
+ log.warning("Ignoring \"interval_ms\" property of mapping definition for %s", expanded_name)
+
+ mapping_entry = VSSMapping(expanded_name, can_signal_name, transform, interval, on_change,
+- node["datatype"], node["description"])
++ node["type"], node["datatype"], node["description"])
+ if can_signal_name not in self._vss2dbc_mapping:
+ self._vss2dbc_mapping[expanded_name] = []
+ self._vss2dbc_mapping[expanded_name].append(mapping_entry)
+@@ -426,12 +427,7 @@ class Mapper(DBCParser):
+ if dbc2vss_def is not None:
+ self._analyze_dbc2vss(expanded_name, node, dbc2vss_def)
+ if "vss2dbc" in node:
+- if node["type"] == "actuator":
+- self._analyze_vss2dbc(expanded_name, node, node["vss2dbc"])
+- else:
+- # vss2dbc is handled by subscription to target value, so only makes sense for actuators
+- log.error("vss2dbc only allowed for actuators, VSS signal %s is not an actuator!", expanded_name)
+- sys.exit(-1)
++ self._analyze_vss2dbc(expanded_name, node, node["vss2dbc"])
+
+ def _traverse_vss_node(self, name, node, prefix=""):
+ """
+@@ -474,9 +470,12 @@ class Mapper(DBCParser):
+ """Get all CAN signal names for which a mapping to a VSS Data Entry exists."""
+ return self._dbc2vss_mapping.keys()
+
+- def get_vss2dbc_entries(self) -> KeysView[str]:
++ def get_vss2dbc_entries(self) -> Dict[str, str]:
+ """Get all VSS Data Entry paths for which a mapping to a CAN signal name exists."""
+- return self._vss2dbc_mapping.keys()
++ entries: Dict[str, str] = {}
++ for name, mappings in self._vss2dbc_mapping.items():
++ entries[name] = mappings[0].signal_type
++ return entries
+
+ def get_vss_names(self) -> Set[str]:
+ """Get all VSS names used in mappings, both vss2dbc and dbc2vss"""
+diff --git a/dbcfeederlib/serverclientwrapper.py b/dbcfeederlib/serverclientwrapper.py
+index fa43d28..86b2ceb 100644
+--- a/dbcfeederlib/serverclientwrapper.py
++++ b/dbcfeederlib/serverclientwrapper.py
+@@ -122,6 +122,6 @@ class ServerClientWrapper(clientwrapper.ClientWrapper):
+ log.info("Feature not implemented")
+ return False
+
+- async def subscribe(self, vss_names: List[str], callback):
++ async def subscribe(self, vss_entries: dict[str, str], callback):
+ log.error("Feature not implemented")
+ return
+diff --git a/mapping/README.md b/mapping/README.md
+index 2155f28..ea6de07 100644
+--- a/mapping/README.md
++++ b/mapping/README.md
+@@ -44,8 +44,6 @@ This is built on the assumption that the DBC provider always send target values
+ Having separate configurations (`dbc2vss` and `vss2dbc`) is needed as wanted value and actual value never are sent
+ by the same DBC signal, they are not even part of the same CAN-frame.
+
+-*This means that `vss2dbc` only can be used for actuators, as only actuators have target values!*
+-
+ ## Example mapping files
+
+ Example mapping files for various VSS versions can be found in this folder.
+--
+2.44.0
+
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/agl-vcar.dbc b/recipes-connectivity/kuksa-val/kuksa-can-provider/agl-vcar.dbc
index e638d1287..e638d1287 100644
--- a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/agl-vcar.dbc
+++ b/recipes-connectivity/kuksa-val/kuksa-can-provider/agl-vcar.dbc
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/dbc_feeder.json.token b/recipes-connectivity/kuksa-val/kuksa-can-provider/can-provider.json.token
index b8df66663..b8df66663 100644
--- a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/dbc_feeder.json.token
+++ b/recipes-connectivity/kuksa-val/kuksa-can-provider/can-provider.json.token
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/dbc_feeder.token b/recipes-connectivity/kuksa-val/kuksa-can-provider/can-provider.token
index 8ce854f34..8ce854f34 100644
--- a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/dbc_feeder.token
+++ b/recipes-connectivity/kuksa-val/kuksa-can-provider/can-provider.token
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/config.ini b/recipes-connectivity/kuksa-val/kuksa-can-provider/config.ini
index 378a3437e..f41fb87a5 100644
--- a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/config.ini
+++ b/recipes-connectivity/kuksa-val/kuksa-can-provider/config.ini
@@ -19,7 +19,7 @@ tls = True
root_ca_path=/etc/kuksa-val/CA.pem
# Token file for authorization.
-token = /etc/kuksa-dbc-feeder/dbc_feeder.token
+token = /etc/kuksa-can-provider/can-provider.token
[can]
# CAN port
@@ -27,4 +27,4 @@ port = can0
# Enable SAE-J1939 Mode. False: ignore
j1939 = False
# DBC file used to parse CAN messages
-dbcfile = /etc/kuksa-dbc-feeder/agl-vcar.dbc
+dbcfile = /etc/kuksa-can-provider/agl-vcar.dbc
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/dbc_default_values.json b/recipes-connectivity/kuksa-val/kuksa-can-provider/dbc_default_values.json
index 0562569db..0562569db 100644
--- a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/dbc_default_values.json
+++ b/recipes-connectivity/kuksa-val/kuksa-can-provider/dbc_default_values.json
diff --git a/recipes-connectivity/kuksa-val/kuksa-can-provider/kuksa-can-provider.default b/recipes-connectivity/kuksa-val/kuksa-can-provider/kuksa-can-provider.default
new file mode 100644
index 000000000..aad0bc419
--- /dev/null
+++ b/recipes-connectivity/kuksa-val/kuksa-can-provider/kuksa-can-provider.default
@@ -0,0 +1,3 @@
+# For output only mode:
+#EXTRA_ARGS="--val2dbc --no-dbc2val --dbc-default /etc/kuksa-can-provider/dbc_default_values.json"
+#LOG_LEVEL=debug
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/kuksa-dbc-feeder.service b/recipes-connectivity/kuksa-val/kuksa-can-provider/kuksa-can-provider.service
index 857f5c7d2..41258d275 100644
--- a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/kuksa-dbc-feeder.service
+++ b/recipes-connectivity/kuksa-val/kuksa-can-provider/kuksa-can-provider.service
@@ -4,7 +4,7 @@ Requires=kuksa-databroker.service can-dev-helper.service
After=kuksa-databroker.service can-dev-helper.service
[Service]
-EnvironmentFile=-/etc/default/kuksa-dbc-feeder
+EnvironmentFile=-/etc/default/kuksa-can-provider
ExecStart=/usr/bin/dbcfeeder.py $EXTRA_ARGS
Restart=on-failure
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/mapping.yml b/recipes-connectivity/kuksa-val/kuksa-can-provider/mapping.yml
index b1c1fece7..b1c1fece7 100644
--- a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/mapping.yml
+++ b/recipes-connectivity/kuksa-val/kuksa-can-provider/mapping.yml
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder_git.bb b/recipes-connectivity/kuksa-val/kuksa-can-provider_git.bb
index 281f10ac3..16861fcf1 100644
--- a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder_git.bb
+++ b/recipes-connectivity/kuksa-val/kuksa-can-provider_git.bb
@@ -1,56 +1,56 @@
-SUMMARY = "DBC feeder for KUKSA.val, the KUKSA Vehicle Abstraction Layer"
-HOMEPAGE = "https://github.com/eclipse/kuksa.val"
-BUGTRACKER = "https://github.com/eclipse/kuksa.val/issues"
+SUMMARY = "CAN provider for KUKSA.val, the KUKSA Vehicle Abstraction Layer"
+HOMEPAGE = "https://github.com/eclipse-kuksa"
+BUGTRACKER = "https://github.com/eclips-kuksa/kuksa-can-provider/issues"
LICENSE = "Apache-2.0"
-LIC_FILES_CHKSUM = "file://LICENSE.txt;md5=175792518e4ac015ab6696d16c4f607e"
+LIC_FILES_CHKSUM = "file://LICENSE;md5=175792518e4ac015ab6696d16c4f607e"
DEPENDS = "python3-setuptools-git-versioning-native"
-PV = "0.4.0+git${SRCPV}"
+PV = "0.4.3+git${SRCPV}"
-SRC_URI = "git://github.com/eclipse/kuksa.val.feeders.git;protocol=https;branch=main \
+SRC_URI = "git://github.com/eclipse-kuksa/kuksa-can-provider.git;protocol=https;branch=main \
file://0001-dbc2val-add-installation-mechanism.patch \
file://0002-dbc2val-usability-improvements.patch \
file://0003-dbc2val-fix-token-file-configuration-option.patch \
file://0004-Enable-val2dbc-for-sensor-values.patch \
file://config.ini \
- file://dbc_feeder.token \
+ file://can-provider.token \
file://agl-vcar.dbc \
file://dbc_default_values.json \
- file://kuksa-dbc-feeder.service \
- file://kuksa-dbc-feeder.default \
+ file://kuksa-can-provider.service \
+ file://kuksa-can-provider.default \
"
-SRCREV = "5bb52eca8d79f7c05a024f69b1faab81dabacdcd"
+SRCREV = "d5fdcfa7574ce69059b6f449629571db0982c1cf"
S = "${WORKDIR}/git"
inherit setuptools3 systemd update-alternatives
-SETUPTOOLS_SETUP_PATH = "${S}/dbc2val"
+#SETUPTOOLS_SETUP_PATH = "${S}/dbc2val"
SYSTEMD_SERVICE:${PN} = "${BPN}.service"
do_install:append() {
- install -d ${D}${sysconfdir}/kuksa-dbc-feeder
- install -m 0644 ${WORKDIR}/config.ini ${D}${sysconfdir}/kuksa-dbc-feeder/
+ install -d ${D}${sysconfdir}/kuksa-can-provider
+ install -m 0644 ${WORKDIR}/config.ini ${D}${sysconfdir}/kuksa-can-provider/
# Token should ideally not be readable by other users.
# The potential for running the feeder as non-root will take some
# investigation.
- install -m 0600 ${WORKDIR}/dbc_feeder.token ${D}${sysconfdir}/kuksa-dbc-feeder/
- install -m 0644 ${WORKDIR}/agl-vcar.dbc ${D}${sysconfdir}/kuksa-dbc-feeder/
- install -m 0644 ${WORKDIR}/dbc_default_values.json ${D}${sysconfdir}/kuksa-dbc-feeder/
+ install -m 0600 ${WORKDIR}/can-provider.token ${D}${sysconfdir}/kuksa-can-provider/
+ install -m 0644 ${WORKDIR}/agl-vcar.dbc ${D}${sysconfdir}/kuksa-can-provider/
+ install -m 0644 ${WORKDIR}/dbc_default_values.json ${D}${sysconfdir}/kuksa-can-provider/
install -d ${D}${sysconfdir}/default
- install -m 0644 ${WORKDIR}/kuksa-dbc-feeder.default ${D}${sysconfdir}/default/
+ install -m 0644 ${WORKDIR}/kuksa-can-provider.default ${D}${sysconfdir}/default/
if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)}; then
install -d ${D}${systemd_system_unitdir}
- install -m 0644 ${WORKDIR}/kuksa-dbc-feeder.service ${D}${systemd_system_unitdir}
+ install -m 0644 ${WORKDIR}/kuksa-can-provider.service ${D}${systemd_system_unitdir}
fi
}
-ALTERNATIVE_LINK_NAME[kuksa-dbc-feeder.env] = "${sysconfdir}/default/kuksa-dbc-feeder"
+ALTERNATIVE_LINK_NAME[kuksa-can-provider.env] = "${sysconfdir}/default/kuksa-can-provider"
-ALTERNATIVE_TARGET_${PN} = "${sysconfdir}/default/kuksa-dbc-feeder.default"
+ALTERNATIVE_TARGET_${PN} = "${sysconfdir}/default/kuksa-can-provider.default"
FILES:${PN} += "${systemd_system_unitdir}"
RDEPENDS:${PN} += " \
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-control-panel.bb b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-control-panel.bb
deleted file mode 100644
index 3148721e7..000000000
--- a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-control-panel.bb
+++ /dev/null
@@ -1,25 +0,0 @@
-SUMMARY = "KUKSA.val DBC feeder configuration for gateway demo control panel"
-
-LICENSE = "Apache-2.0"
-LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/Apache-2.0;md5=89aea4e17d99a7cacdbeed46a0096b10"
-
-SRC_URI = "file://kuksa-dbc-feeder.control-panel"
-
-S = "${WORKDIR}"
-
-inherit update-alternatives
-
-do_compile[noexec] = "1"
-
-do_install() {
- install -d ${D}${sysconfdir}/default
- install -m 0644 ${WORKDIR}/kuksa-dbc-feeder.control-panel ${D}${sysconfdir}/default/
-}
-
-ALTERNATIVE_LINK_NAME[kuksa-dbc-feeder.env] = "${sysconfdir}/default/kuksa-dbc-feeder"
-
-RPROVIDES:${PN} = "kuksa-dbc-feeder.env"
-ALTERNATIVE:${PN} = "kuksa-dbc-feeder.env"
-ALTERNATIVE_TARGET_${PN} = "${sysconfdir}/default/kuksa-dbc-feeder.control-panel"
-
-RDEPENDS:${PN} += "kuksa-dbc-feeder"
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-control-panel.bb b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-control-panel.bb
deleted file mode 100644
index 4afcfaf10..000000000
--- a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-control-panel.bb
+++ /dev/null
@@ -1,25 +0,0 @@
-SUMMARY = "KUKSA.val DBC feeder configuration for gateway demo"
-
-LICENSE = "Apache-2.0"
-LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/Apache-2.0;md5=89aea4e17d99a7cacdbeed46a0096b10"
-
-SRC_URI = "file://kuksa-dbc-feeder.gw-control-panel"
-
-S = "${WORKDIR}"
-
-inherit update-alternatives
-
-do_compile[noexec] = "1"
-
-do_install() {
- install -d ${D}${sysconfdir}/default
- install -m 0644 ${WORKDIR}/kuksa-dbc-feeder.gw-control-panel ${D}${sysconfdir}/default/
-}
-
-ALTERNATIVE_LINK_NAME[kuksa-dbc-feeder.env] = "${sysconfdir}/default/kuksa-dbc-feeder"
-
-RPROVIDES:${PN} = "kuksa-dbc-feeder.env"
-ALTERNATIVE:${PN} = "kuksa-dbc-feeder.env"
-ALTERNATIVE_TARGET_${PN} = "${sysconfdir}/default/kuksa-dbc-feeder.gw-control-panel"
-
-RDEPENDS:${PN} += "kuksa-dbc-feeder"
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware.bb b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware.bb
deleted file mode 100644
index 513a3f6ef..000000000
--- a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware.bb
+++ /dev/null
@@ -1,32 +0,0 @@
-SUMMARY = "KUKSA.val DBC feeder configuration for gateway demo (secondary CAN interface)"
-
-LICENSE = "Apache-2.0"
-LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/Apache-2.0;md5=89aea4e17d99a7cacdbeed46a0096b10"
-
-SRC_URI = "file://kuksa-dbc-feeder.gw-hardware \
- file://config.ini.gw-hardware \
- file://kuksa-dbc-feeder-can1.service \
-"
-
-S = "${WORKDIR}"
-
-inherit systemd update-alternatives
-
-SYSTEMD_SERVICE:${PN} = "kuksa-dbc-feeder-can1.service"
-
-do_compile[noexec] = "1"
-
-do_install() {
- install -d ${D}${sysconfdir}/default
- install -m 0644 ${WORKDIR}/kuksa-dbc-feeder.gw-hardware ${D}${sysconfdir}/default/
- install -d ${D}${sysconfdir}/kuksa-dbc-feeder
- install -m 0644 ${WORKDIR}/config.ini.gw-hardware ${D}${sysconfdir}/kuksa-dbc-feeder/
- if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)}; then
- install -d ${D}${systemd_system_unitdir}
- install -m 0644 ${WORKDIR}/kuksa-dbc-feeder-can1.service ${D}${systemd_system_unitdir}
- fi
-}
-
-FILES:${PN} += "${systemd_system_unitdir}"
-
-RDEPENDS:${PN} += "kuksa-dbc-feeder vss-agl-gw-hardware"
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware/kuksa-dbc-feeder.gw-hardware b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware/kuksa-dbc-feeder.gw-hardware
deleted file mode 100644
index 562a56b8b..000000000
--- a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder-conf-gw-hardware/kuksa-dbc-feeder.gw-hardware
+++ /dev/null
@@ -1,3 +0,0 @@
-# DBC input for steering wheel, output for HVAC
-EXTRA_ARGS="--val2dbc --dbc2val --dbc-default /etc/kuksa-dbc-feeder/dbc_default_values.json --config /etc/kuksa-dbc-feeder/config.ini.gw-hardware"
-#LOG_LEVEL=debug
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/0002-dbc2val-usability-improvements.patch b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/0002-dbc2val-usability-improvements.patch
deleted file mode 100644
index 31051b18c..000000000
--- a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/0002-dbc2val-usability-improvements.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From b217a746ef7b92291320e4c1a66b52df0318495f Mon Sep 17 00:00:00 2001
-From: Scott Murray <scott.murray@konsulko.com>
-Date: Sat, 5 Aug 2023 13:58:16 -0400
-Subject: [PATCH 2/3] dbc2val: usability improvements
-
-Changes:
-- Tweaked default configuration file search path to better match
- Linux FHS and kuksa-val-server. First look for a config.ini in
- /etc/kuksa-dbc-feeder, then /etc/dbc_feeder.ini.
-- Add catching of exceptions around CAN device opening so that the
- script can exit cleanly with an error message if the device is
- not available.
-- Fixed shutdown behavior with some tweaks to actually stop the
- reader and KUKSA.val client library threads. This makes the
- script actually exit on SIGTERM as opposed to hanging.
-
-Upstream-Status: pending
-
-Signed-off-by: Scott Murray <scott.murray@konsulko.com>
-
----
- dbc2val/dbcfeeder.py | 15 +++++++++++++--
- 1 file changed, 13 insertions(+), 2 deletions(-)
-
-diff --git a/dbc2val/dbcfeeder.py b/dbc2val/dbcfeeder.py
-index 966dba7..e7fd319 100755
---- a/dbc2val/dbcfeeder.py
-+++ b/dbc2val/dbcfeeder.py
-@@ -188,7 +188,11 @@ class Feeder:
-
- # use socketCAN
- log.info("Using socket CAN device '%s'", canport)
-+ try:
- self._reader.start_listening(bustype="socketcan", channel=canport)
-+ except:
-+ log.error("Could not open {}, exiting".format(canport))
-+ sys.exit(-1)
-
- receiver = threading.Thread(target=self._run_receiver)
- receiver.start()
-@@ -212,6 +216,11 @@ class Feeder:
- threads.append(transmitter)
- else:
- log.info("No val2dbc mappings found or val2dbc disabled!!")
-+
-+ # Spin so signal handlers will work
-+ while not self._shutdown:
-+ time.sleep(0.1)
-+
- # Wait for all of them to finish
- for thread in threads:
- thread.join()
-@@ -363,8 +372,10 @@ def parse_config(filename):
- configfile = filename
- else:
- config_candidates = [
-- "/config/dbc_feeder.ini",
-+ "/etc/kuksa-dbc-feeder/config.ini",
-+ "/etc/kuksa-dbc-feeder/dbc_feeder.ini",
- "/etc/dbc_feeder.ini",
-+ "/config/dbc_feeder.ini",
- "config/dbc_feeder.ini",
- ]
- for candidate in config_candidates:
-@@ -577,7 +588,7 @@ def main(argv):
- elif "can" in config and "dbc_default_file" in config["can"]:
- dbc_default = config["can"]["dbc_default_file"]
- else:
-- dbc_default = "dbc_default_values.json"
-+ dbc_default = ""
-
- if args.dbc2val:
- use_dbc2val = True
---
-2.41.0
-
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/0004-Enable-val2dbc-for-sensor-values.patch b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/0004-Enable-val2dbc-for-sensor-values.patch
deleted file mode 100644
index 7f22a90ad..000000000
--- a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/0004-Enable-val2dbc-for-sensor-values.patch
+++ /dev/null
@@ -1,142 +0,0 @@
-From d6f1aaa7f26aa52f4b219f60e704d5ab2954f082 Mon Sep 17 00:00:00 2001
-From: Scott Murray <scott.murray@konsulko.com>
-Date: Wed, 3 Apr 2024 02:09:11 +0900
-Subject: [PATCH] Enable val2dbc for sensor values
-
-Rework to allow val2dbc mode to write out sensor values in
-addition to actuator target values.
-
-Upstream-Status: pending
-
-Signed-off-by: Scott Murray <scott.murray@konsulko.com>
----
- dbc2val/dbcfeeder.py | 8 ++++++--
- .../dbcfeederlib/databrokerclientwrapper.py | 18 ++++++++++++------
- dbc2val/dbcfeederlib/dbc2vssmapper.py | 14 +++++++++-----
- dbc2val/dbcfeederlib/serverclientwrapper.py | 2 +-
- 4 files changed, 28 insertions(+), 14 deletions(-)
-
-diff --git a/dbc2val/dbcfeeder.py b/dbc2val/dbcfeeder.py
-index e7fd319..5e0df2f 100755
---- a/dbc2val/dbcfeeder.py
-+++ b/dbc2val/dbcfeeder.py
-@@ -322,15 +322,19 @@ class Feeder:
- log.debug("vss-Update callback!")
- dbc_ids = set()
- for update in updates:
-+ value = None
- if update.entry.value is not None:
-- # This shall currently never happen as we do not subscribe to this
- log.warning(f"Current value for {update.entry.path} is now: "
- f"{update.entry.value.value} of type {type(update.entry.value.value)}")
-+ value = update.entry.value.value
-
- if update.entry.actuator_target is not None:
- log.debug(f"Target value for {update.entry.path} is now: {update.entry.actuator_target} "
- f"of type {type(update.entry.actuator_target.value)}")
-- new_dbc_ids = self._mapper.handle_update(update.entry.path, update.entry.actuator_target.value)
-+ value = update.entry.actuator_target.value
-+
-+ if value != None:
-+ new_dbc_ids = self._mapper.handle_update(update.entry.path, value)
- dbc_ids.update(new_dbc_ids)
-
- can_ids = set()
-diff --git a/dbc2val/dbcfeederlib/databrokerclientwrapper.py b/dbc2val/dbcfeederlib/databrokerclientwrapper.py
-index 35836e9..46ae330 100644
---- a/dbc2val/dbcfeederlib/databrokerclientwrapper.py
-+++ b/dbc2val/dbcfeederlib/databrokerclientwrapper.py
-@@ -200,14 +200,20 @@ class DatabrokerClientWrapper(clientwrapper.ClientWrapper):
- def supports_subscription(self) -> bool:
- return True
-
-- async def subscribe(self, vss_names: List[str], callback):
-+ async def subscribe(self, vss_entries: dict[str, str], callback):
- """Creates a subscription and calls the callback when data received"""
- entries = []
-- for name in vss_names:
-- # Always subscribe to target
-- subscribe_entry = SubscribeEntry(name, View.FIELDS, [Field.ACTUATOR_TARGET])
-- log.info(f"Subscribe entry: {subscribe_entry}")
-- entries.append(subscribe_entry)
-+ for name, signal_type in vss_entries.items():
-+ if signal_type == "actuator":
-+ subscribe_entry = SubscribeEntry(name, View.FIELDS, [Field.ACTUATOR_TARGET])
-+ log.info(f"Subscribe entry: {subscribe_entry}")
-+ entries.append(subscribe_entry)
-+ if signal_type == "sensor":
-+ subscribe_entry = SubscribeEntry(name, View.FIELDS, [Field.VALUE])
-+ log.info(f"Subscribe entry: {subscribe_entry}")
-+ entries.append(subscribe_entry)
-+ if not entries:
-+ return
-
- # If there is a path VSSClient will request a secure connection
- if self._tls and self._root_ca_path:
-diff --git a/dbc2val/dbcfeederlib/dbc2vssmapper.py b/dbc2val/dbcfeederlib/dbc2vssmapper.py
-index 5142a5e..8f04cdd 100644
---- a/dbc2val/dbcfeederlib/dbc2vssmapper.py
-+++ b/dbc2val/dbcfeederlib/dbc2vssmapper.py
-@@ -61,12 +61,13 @@ class VSSMapping:
- parser: Parser = Parser()
-
- def __init__(self, vss_name: str, dbc_name: str, transform: dict, interval_ms: int,
-- on_change: bool, datatype: str, description: str):
-+ on_change: bool, signal_type: str, datatype: str, description: str):
- self.vss_name = vss_name
- self.dbc_name = dbc_name
- self.transform = transform
- self.interval_ms = interval_ms
- self.on_change = on_change
-+ self.signal_type = signal_type
- self.datatype = datatype
- self.description = description
- # For time comparison (interval_ms) we store last value used for comparison. Unit seconds.
-@@ -282,7 +283,7 @@ class Mapper:
- log.info(f"Using default interval 1000 ms for {expanded_name}")
- interval = 1000
- mapping_entry = VSSMapping(expanded_name, dbc_name, transform, interval, on_change,
-- node["datatype"], node["description"])
-+ node["type"], node["datatype"], node["description"])
- if dbc_name not in self.dbc2val_mapping:
- self.dbc2val_mapping[dbc_name] = []
- self.dbc2val_mapping[dbc_name].append(mapping_entry)
-@@ -306,7 +307,7 @@ class Mapper:
- log.warning(f"interval_ms attribute ignored for {expanded_name}")
-
- mapping_entry = VSSMapping(expanded_name, dbc_name, transform, interval, on_change,
-- node["datatype"], node["description"])
-+ node["type"], node["datatype"], node["description"])
- if dbc_name not in self.val2dbc_mapping:
- self.val2dbc_mapping[expanded_name] = []
- self.val2dbc_mapping[expanded_name].append(mapping_entry)
-@@ -380,9 +381,12 @@ class Mapper:
- """Return a set of all dbc names used for reception"""
- return self.dbc2val_mapping.keys()
-
-- def get_val2dbc_entries(self) -> KeysView:
-+ def get_val2dbc_entries(self) -> Dict[str, str]:
- """Return a set of all vss names used for reception"""
-- return self.val2dbc_mapping.keys()
-+ entries: Dict[str, str] = {}
-+ for name, mappings in self.val2dbc_mapping.items():
-+ entries[name] = mappings[0].signal_type
-+ return entries
-
- def get_vss_names(self) -> Set[str]:
- """Get all VSS names used in mappings, both vss2dbc and dbc2vss"""
-diff --git a/dbc2val/dbcfeederlib/serverclientwrapper.py b/dbc2val/dbcfeederlib/serverclientwrapper.py
-index 63bc12e..ca11daf 100644
---- a/dbc2val/dbcfeederlib/serverclientwrapper.py
-+++ b/dbc2val/dbcfeederlib/serverclientwrapper.py
-@@ -125,6 +125,6 @@ class ServerClientWrapper(clientwrapper.ClientWrapper):
- log.info("Feature not implemented")
- return False
-
-- async def subscribe(self, vss_names: List[str], callback):
-+ async def subscribe(self, vss_entries: dict[str, str], callback):
- log.error("Feature not implemented")
- return
---
-2.34.1
-
diff --git a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/kuksa-dbc-feeder.default b/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/kuksa-dbc-feeder.default
deleted file mode 100644
index 5d787158d..000000000
--- a/recipes-connectivity/kuksa-val/kuksa-dbc-feeder/kuksa-dbc-feeder.default
+++ /dev/null
@@ -1,3 +0,0 @@
-# For output only mode:
-#EXTRA_ARGS="--val2dbc --no-dbc2val --dbc-default /etc/kuksa-dbc-feeder/dbc_default_values.json"
-#LOG_LEVEL=debug
diff --git a/recipes-platform/images/agl-gateway-demo-preconfigured.bb b/recipes-platform/images/agl-gateway-demo-preconfigured.bb
index 4a9cf0b2a..56814ca1b 100644
--- a/recipes-platform/images/agl-gateway-demo-preconfigured.bb
+++ b/recipes-platform/images/agl-gateway-demo-preconfigured.bb
@@ -5,6 +5,6 @@ SUMMARY = "AGL gateway preconfigured demo image"
# Second CAN interface will be connected to the demo setup
# steering wheel & HVAC in the full demo.
IMAGE_INSTALL += " \
- kuksa-dbc-feeder-conf-gw-hardware \
+ kuksa-can-provider-conf-gw-hardware \
vss-agl-gw-hardware \
"
diff --git a/recipes-platform/images/agl-gateway-demo.bb b/recipes-platform/images/agl-gateway-demo.bb
index 1e800c540..32bf2f2f6 100644
--- a/recipes-platform/images/agl-gateway-demo.bb
+++ b/recipes-platform/images/agl-gateway-demo.bb
@@ -18,7 +18,7 @@ AGL_DEVEL_INSTALL = " \
IMAGE_INSTALL += " \
agl-vss-proxy \
- kuksa-dbc-feeder-conf-gw-control-panel \
+ kuksa-can-provider-conf-gw-control-panel \
vss-agl-gw-control-panel \
${@bb.utils.contains('DISTRO_FEATURES', 'agl-devel', '${AGL_DEVEL_INSTALL}', '', d)} \
"
diff --git a/recipes-platform/images/agl-ivi-demo-control-panel-preconfigured-gateway.bb b/recipes-platform/images/agl-ivi-demo-control-panel-preconfigured-gateway.bb
index 19575a8e5..fc23e88a4 100644
--- a/recipes-platform/images/agl-ivi-demo-control-panel-preconfigured-gateway.bb
+++ b/recipes-platform/images/agl-ivi-demo-control-panel-preconfigured-gateway.bb
@@ -7,5 +7,5 @@ IMAGE_FEATURES += "kuksa-val-databroker"
IMAGE_INSTALL += " \
agl-demo-control-panel-conf-gateway-demo \
vss-agl-control-panel \
- kuksa-dbc-feeder-conf-control-panel \
+ kuksa-can-provider-conf-control-panel \
"
diff --git a/recipes-platform/packagegroups/packagegroup-agl-kuksa-val-databroker.bb b/recipes-platform/packagegroups/packagegroup-agl-kuksa-val-databroker.bb
index a9382e5b7..792e51f52 100644
--- a/recipes-platform/packagegroups/packagegroup-agl-kuksa-val-databroker.bb
+++ b/recipes-platform/packagegroups/packagegroup-agl-kuksa-val-databroker.bb
@@ -12,7 +12,7 @@ RDEPENDS:packagegroup-agl-kuksa-val-databroker = "\
kuksa-databroker \
kuksa-databroker-agl \
kuksa-certificates-agl \
- kuksa-dbc-feeder \
+ kuksa-can-provider \
agl-vss-helper \
"