diff options
Diffstat (limited to 'recipes-automotive/climatecontrolplugin/files/climatecontrol.cpp')
| -rw-r--r-- | recipes-automotive/climatecontrolplugin/files/climatecontrol.cpp | 262 |
1 files changed, 0 insertions, 262 deletions
diff --git a/recipes-automotive/climatecontrolplugin/files/climatecontrol.cpp b/recipes-automotive/climatecontrolplugin/files/climatecontrol.cpp deleted file mode 100644 index dc2a54b42..000000000 --- a/recipes-automotive/climatecontrolplugin/files/climatecontrol.cpp +++ /dev/null @@ -1,262 +0,0 @@ -/* Copyright (C) 2015, Jaguar Land Rover. All Rights Reserved. - * - * This Source Code Form is subject to the terms of the Mozilla Public - * License, v. 2.0. If a copy of the MPL was not distributed with this - * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ - -#include <QDBusConnection> -#include <QDBusObjectPath> -#include <QDBusReply> -#include <QDebug> - -#include "climatecontrol.h" - -ClimateControl::ClimateControl(QQuickItem *parent): - QQuickItem(parent) -{ - qDebug() << "ClimateControl plugin loaded!"; - - // - // Verify that we can access the system bus, where AMB resides. This is largely informational, since the ambdbusaccess - // application is responsible for actually accessing AMB. - // - if (!QDBusConnection::systemBus().isConnected()) - { - qDebug() << "Unable to connect to system bus."; - } -} - -ClimateControl::~ClimateControl() -{ - qDebug() << "ClimateControl plugin unloaded."; -} - -// Accessor methods. -qint32 ClimateControl::getZone() -{ - return this->zone; -} - -void ClimateControl::setZone(qint32 newZone) -{ - if (this->zone != newZone) - { - this->zone = newZone; - - qDebug().nospace() << "Updated zone to " << this->zone << "."; - - emit zoneChanged(); - - // Now that the zone has been updated, fetch the settings for this new zone. - this->getSettings(); - } -} - -quint16 ClimateControl::getFanSpeedLevel() -{ - return this->fanSpeedLevel; -} - -void ClimateControl::setFanSpeedLevel(quint16 newFanSpeedLevel) -{ - if (this->fanSpeedLevel != newFanSpeedLevel) - { - this->dbusWrite("FanSpeedLevel", newFanSpeedLevel); - this->fanSpeedLevel = newFanSpeedLevel; - - qDebug().nospace() << "Updated fan speed level to " << this->fanSpeedLevel << "."; - - emit fanSpeedLevelChanged(); - } -} - -qint32 ClimateControl::getTargetTemperature() -{ - return this->targetTemperature; -} - -void ClimateControl::setTargetTemperature(qint32 newTargetTemperature) -{ - if (this->targetTemperature != newTargetTemperature) - { - this->dbusWrite("TargetTemperature", newTargetTemperature); - this->targetTemperature = newTargetTemperature; - - qDebug().nospace() << "Updated target temperature to " << this->targetTemperature << "."; - - emit targetTemperatureChanged(); - } -} - -bool ClimateControl::getAirConditioning() -{ - return this->airConditioning; -} - -void ClimateControl::setAirConditioning(bool newAirConditioning) -{ - if (this->airConditioning != newAirConditioning) - { - // NOTE: This property is not enabled in the current version of AMB, so no D-Bus access is performed. - this->airConditioning = newAirConditioning; - - qDebug().nospace() << "Updated air conditioning to " << this->airConditioning << "."; - - emit airConditioningChanged(); - } -} - -bool ClimateControl::getHeater() -{ - return this->heater; -} - -void ClimateControl::setHeater(bool newHeater) -{ - if (this->heater != newHeater) - { - // NOTE: This property is not enabled in the current version of AMB, so no D-Bus access is performed. - this->heater = newHeater; - - qDebug().nospace() << "Updated heater to " << this->heater << "."; - - emit heaterChanged(); - } -} - -quint8 ClimateControl::getSeatHeater() -{ - return this->seatHeater; -} - -void ClimateControl::setSeatHeater(quint8 newSeatHeater) -{ - if (this->seatHeater != newSeatHeater) - { - // NOTE: This property is not enabled in the current version of AMB, so no D-Bus access is performed. - this->seatHeater = newSeatHeater; - - qDebug().nospace() << "Updated seat heater to " << this->seatHeater << "."; - - emit seatHeaterChanged(); - } -} - -quint8 ClimateControl::getSeatCooler() -{ - return this->seatCooler; -} - -void ClimateControl::setSeatCooler(quint8 newSeatCooler) -{ - if (this->seatCooler != newSeatCooler) - { - // NOTE: This property is not enabled in the current version of AMB, so no D-Bus access is performed. - this->seatCooler = newSeatCooler; - - qDebug().nospace() << "Updated seat cooler to " << this->seatCooler << "."; - - emit seatCoolerChanged(); - } -} - -bool ClimateControl::getAirCirculation() -{ - return this->airCirculation; -} - -void ClimateControl::setAirCirculation(bool newAirCirculation) -{ - if (this->airCirculation != newAirCirculation) - { - // NOTE: This property is not enabled in the current version of AMB, so no D-Bus access is performed. - this->airCirculation = newAirCirculation; - - qDebug().nospace() << "Updated air circulation to " << this->airCirculation << "."; - - emit airCirculationChanged(); - } -} - -quint8 ClimateControl::getSteeringWheelHeater() -{ - return this->steeringWheelHeater; -} - -void ClimateControl::setSteeringWheelHeater(quint8 newSteeringWheelHeater) -{ - if (this->steeringWheelHeater != newSteeringWheelHeater) - { - // NOTE: This property is not enabled in the current version of AMB, so no D-Bus access is performed. - this->steeringWheelHeater = newSteeringWheelHeater; - - qDebug().nospace() << "Updated steering wheel heater to " << this->steeringWheelHeater << "."; - - emit steeringWheelHeaterChanged(); - } -} - -// D-Bus connection methods. -QVariant ClimateControl::dbusRead(const char *property) -{ - QString arguments = "R ClimateControl " + QString::fromUtf8(property); - QString zoneString; - - // The zone has not been set yet, so do not bother reading from AMB with the exception of FanSpeedLevel at zone 0. - if (!this->zone && strcmp(property, "FanSpeedLevel")) - { - // Return something resembling an uninitialized variable. - return 0; - } - - // The FanSpeedLevel property is the only property at zone 0 for now. - zoneString = QString::number(!strcmp(property, "FanSpeedLevel") ? 0 : this->zone); - - // Add in the zone information. - arguments += " " + zoneString; - - qDebug() << "Calling ambdbusaccess with the following arguments:" << arguments; - - // system() returns the result in the upper 8 bits, so shift the result to the right by 8. - return system(QString("/usr/lib/qt5/qml/Automotive/ambdbusaccess " + arguments).toStdString().c_str()) >> 8; -} - -void ClimateControl::dbusWrite(const char *property, QVariant value) -{ - QString arguments = "W ClimateControl " + QString::fromUtf8(property); - QString zoneString; - - // The zone has not been set yet, so do not bother writing to AMB with the exception of FanSpeedLevel at zone 0. - if (!this->zone && strcmp(property, "FanSpeedLevel")) - { - return; - } - - // The FanSpeedLevel property is the only property at zone 0 for now. - zoneString = QString::number(!strcmp(property, "FanSpeedLevel") ? 0 : this->zone); - - // Add in the zone information and value to write. - arguments += " " + zoneString + " " + value.toString(); - - qDebug() << "Calling ambdbusaccess with the following arguments:" << arguments; - - system(QString("/usr/lib/qt5/qml/Automotive/ambdbusaccess " + arguments).toStdString().c_str()); -} - -void ClimateControl::getSettings() -{ - quint8 ambFanSpeedLevel; - qint32 ambTargetTemperature; - - // - // Go fetch the settings for this zone. - // - // NOTE: Other properties are not enabled in the current version of AMB, so no D-Bus access is performed for them. - // - ambFanSpeedLevel = this->dbusRead("FanSpeedLevel").toInt(); - ambTargetTemperature = this->dbusRead("TargetTemperature").toInt(); - - // Call the set methods to generate Qt signals, if any are necessary. - this->setFanSpeedLevel(ambFanSpeedLevel); - this->setTargetTemperature(ambTargetTemperature); -} |