diff options
Diffstat (limited to 'recipes-multimedia/musicpd/mpd/mpd.conf.in')
| -rw-r--r-- | recipes-multimedia/musicpd/mpd/mpd.conf.in | 420 |
1 files changed, 0 insertions, 420 deletions
diff --git a/recipes-multimedia/musicpd/mpd/mpd.conf.in b/recipes-multimedia/musicpd/mpd/mpd.conf.in deleted file mode 100644 index f9f92c98b..000000000 --- a/recipes-multimedia/musicpd/mpd/mpd.conf.in +++ /dev/null @@ -1,420 +0,0 @@ -# An example configuration file for MPD -# See the mpd.conf man page for a more detailed description of each parameter. - - -# Files and directories ####################################################### -# -# This setting controls the top directory which MPD will search to discover the -# available audio files and add them to the daemon's online database. This -# setting defaults to the XDG directory, otherwise the music directory will be -# be disabled and audio files will only be accepted over ipc socket (using -# file:// protocol) or streaming files over an accepted protocol. -# -music_directory "%music_directory%" -# -# This setting sets the MPD internal playlist directory. The purpose of this -# directory is storage for playlists created by MPD. The server will use -# playlist files not created by the server but only if they are in the MPD -# format. This setting defaults to playlist saving being disabled. -# -playlist_directory "%playlist_directory%" -# -# This setting sets the location of the MPD database. This file is used to -# load the database at server start up and store the database while the -# server is not up. This setting defaults to disabled which will allow -# MPD to accept files over ipc socket (using file:// protocol) or streaming -# files over an accepted protocol. -# -db_file "%db_file%" -# -# These settings are the locations for the daemon log files for the daemon. -# These logs are great for troubleshooting, depending on your log_level -# settings. -# -# The special value "syslog" makes MPD use the local syslog daemon. This -# setting defaults to logging to syslog, otherwise logging is disabled. -# -log_file "%log_file%" -# -# This setting sets the location of the file which stores the process ID -# for use of mpd --kill and some init scripts. This setting is disabled by -# default and the pid file will not be stored. -# -#pid_file "/var/run/mpd/mpd.pid" -# -# This setting sets the location of the file which contains information about -# most variables to get MPD back into the same general shape it was in before -# it was brought down. This setting is disabled by default and the server -# state will be reset on server start up. -# -state_file "%state_file%" -# -# The location of the sticker database. This is a database which -# manages dynamic information attached to songs. -# -#sticker_file "~/.mpd/sticker.sql" -# -############################################################################### - - -# General music daemon options ################################################ -# -# This setting specifies the user that MPD will run as. MPD should never run as -# root and you may use this setting to make MPD change its user ID after -# initialization. This setting is disabled by default and MPD is run as the -# current user. -# -user "mpd" -# -# This setting specifies the group that MPD will run as. If not specified -# primary group of user specified with "user" setting will be used (if set). -# This is useful if MPD needs to be a member of group such as "audio" to -# have permission to use sound card. -# -group "audio" -# -# This setting sets the address for the daemon to listen on. Careful attention -# should be paid if this is assigned to anything other then the default, any. -# This setting can deny access to control of the daemon. -# -# For network -bind_to_address "any" -# -# And for Unix Socket -#bind_to_address "~/.mpd/socket" -# -# This setting is the TCP port that is desired for the daemon to get assigned -# to. -# -#port "6600" -# -# This setting controls the type of information which is logged. Available -# setting arguments are "default", "secure" or "verbose". The "verbose" setting -# argument is recommended for troubleshooting, though can quickly stretch -# available resources on limited hardware storage. -# -#log_level "default" -# -# If you have a problem with your MP3s ending abruptly it is recommended that -# you set this argument to "no" to attempt to fix the problem. If this solves -# the problem, it is highly recommended to fix the MP3 files with vbrfix -# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which -# point gapless MP3 playback can be enabled. -# -#gapless_mp3_playback "yes" -# -# This setting enables MPD to create playlists in a format usable by other -# music players. -# -#save_absolute_paths_in_playlists "no" -# -# This setting defines a list of tag types that will be extracted during the -# audio file discovery process. Optionally, 'comment' can be added to this -# list. -# -#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc" -# -# This setting enables automatic update of MPD's database when files in -# music_directory are changed. -# -#auto_update "yes" -# -# Limit the depth of the directories being watched, 0 means only watch -# the music directory itself. There is no limit by default. -# -#auto_update_depth "3" -# -############################################################################### - - -# Symbolic link behavior ###################################################### -# -# If this setting is set to "yes", MPD will discover audio files by following -# symbolic links outside of the configured music_directory. -# -#follow_outside_symlinks "yes" -# -# If this setting is set to "yes", MPD will discover audio files by following -# symbolic links inside of the configured music_directory. -# -#follow_inside_symlinks "yes" -# -############################################################################### - - -# Zeroconf / Avahi Service Discovery ########################################## -# -# If this setting is set to "yes", service information will be published with -# Zeroconf / Avahi. -# -#zeroconf_enabled "yes" -# -# The argument to this setting will be the Zeroconf / Avahi unique name for -# this MPD server on the network. -# -#zeroconf_name "Music Player" -# -############################################################################### - - -# Permissions ################################################################# -# -# If this setting is set, MPD will require password authorization. The password -# can setting can be specified multiple times for different password profiles. -# -#password "password@read,add,control,admin" -# -# This setting specifies the permissions a user has who has not yet logged in. -# -#default_permissions "read,add,control,admin" -# -############################################################################### - - -# Input ####################################################################### -# - -input { - plugin "curl" -# proxy "proxy.isp.com:8080" -# proxy_user "user" -# proxy_password "password" -} - -# -############################################################################### - -# Audio Output ################################################################ -# -# MPD supports various audio output types, as well as playing through multiple -# audio outputs at the same time, through multiple audio_output settings -# blocks. Setting this block is optional, though the server will only attempt -# autodetection for one sound card. -# -# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of -# other audio outputs. -# -# board specific examples ##################################################### -# (feel free to add futher) -# -# gumstix overo (tested with TOBI expansion board) -#audio_output { -# type "alsa" -# name "overo" -# mixer_control "Headset" -# mixer_index "0" -#} -# -# general examples ############################################################ -# -# An example of an ALSA output: -# -#audio_output { -# type "alsa" -# name "My ALSA Device" -## device "hw:0,0" # optional -## format "44100:16:2" # optional -## mixer_type "hardware" # optional -## mixer_device "default" # optional -## mixer_control "PCM" # optional -## mixer_index "0" # optional -#} -# -# An example of an OSS output: -# -#audio_output { -# type "oss" -# name "My OSS Device" -## device "/dev/dsp" # optional -## format "44100:16:2" # optional -## mixer_type "hardware" # optional -## mixer_device "/dev/mixer" # optional -## mixer_control "PCM" # optional -#} -# -# An example of a shout output (for streaming to Icecast): -# -#audio_output { -# type "shout" -# encoding "ogg" # optional -# name "My Shout Stream" -# host "localhost" -# port "8000" -# mount "/mpd.ogg" -# password "hackme" -# quality "5.0" -# bitrate "128" -# format "44100:16:1" -## protocol "icecast2" # optional -## user "source" # optional -## description "My Stream Description" # optional -## genre "jazz" # optional -## public "no" # optional -## timeout "2" # optional -## mixer_type "software" # optional -#} -# -# An example of a recorder output: -# -#audio_output { -# type "recorder" -# name "My recorder" -# encoder "vorbis" # optional, vorbis or lame -# path "/var/lib/mpd/recorder/mpd.ogg" -## quality "5.0" # do not define if bitrate is defined -# bitrate "128" # do not define if quality is defined -# format "44100:16:1" -#} -# -# An example of a httpd output (built-in HTTP streaming server): -# -#audio_output { -# type "httpd" -# name "My HTTP Stream" -# encoder "vorbis" # optional, vorbis or lame -# port "8000" -# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6 -## quality "5.0" # do not define if bitrate is defined -# bitrate "128" # do not define if quality is defined -# format "44100:16:1" -# max_clients "0" # optional 0=no limit -#} -# -# An example of a pulseaudio output (streaming to a remote pulseaudio server) -# -#audio_output { -# type "pulse" -# name "My Pulse Output" -## server "remote_server" # optional -## sink "remote_server_sink" # optional -#} -# -## Example "pipe" output: -# -#audio_output { -# type "pipe" -# name "my pipe" -# command "aplay -f cd 2>/dev/null" -## Or if you're want to use AudioCompress -# command "AudioCompress -m | aplay -f cd 2>/dev/null" -## Or to send raw PCM stream through PCM: -# command "nc example.org 8765" -# format "44100:16:2" -#} -# -## An example of a null output (for no audio output): -# -#audio_output { -# type "null" -# name "My Null Output" -# mixer_type "none" # optional -#} -# -# This setting will change all decoded audio to be converted to the specified -# format before being passed to the audio outputs. By default, this setting is -# disabled. -# -#audio_output_format "44100:16:2" -# -# If MPD has been compiled with libsamplerate support, this setting specifies -# the sample rate converter to use. Possible values can be found in the -# mpd.conf man page or the libsamplerate documentation. By default, this is -# setting is disabled. -# -#samplerate_converter "Fastest Sinc Interpolator" -# -############################################################################### - - -# Normalization automatic volume adjustments ################################## -# -# This setting specifies the type of ReplayGain to use. This setting can have -# the argument "off", "album" or "track". See <http://www.replaygain.org> -# for more details. This setting is off by default. -# -#replaygain "album" -# -# This setting sets the pre-amp used for files that have ReplayGain tags. By -# default this setting is disabled. -# -#replaygain_preamp "0" -# -# This setting enables on-the-fly normalization volume adjustment. This will -# result in the volume of all playing audio to be adjusted so the output has -# equal "loudness". This setting is disabled by default. -# -#volume_normalization "no" -# -############################################################################### - - -# MPD Internal Buffering ###################################################### -# -# This setting adjusts the size of internal decoded audio buffering. Changing -# this may have undesired effects. Don't change this if you don't know what you -# are doing. -# -#audio_buffer_size "2048" -# -# This setting controls the percentage of the buffer which is filled before -# beginning to play. Increasing this reduces the chance of audio file skipping, -# at the cost of increased time prior to audio playback. -# -#buffer_before_play "10%" -# -############################################################################### - - -# Resource Limitations ######################################################## -# -# These settings are various limitations to prevent MPD from using too many -# resources. Generally, these settings should be minimized to prevent security -# risks, depending on the operating resources. -# -#connection_timeout "60" -#max_connections "10" -#max_playlist_length "16384" -#max_command_list_size "2048" -#max_output_buffer_size "8192" -# -############################################################################### - - -# Character Encoding ########################################################## -# -# If file or directory names do not display correctly for your locale then you -# may need to modify this setting. -# -#filesystem_charset "UTF-8" -# -# This setting controls the encoding that ID3v1 tags should be converted from. -# -#id3v1_encoding "ISO-8859-1" -# -############################################################################### - - -# SIDPlay decoder ############################################################# -# -# songlength_database: -# Location of your songlengths file, as distributed with the HVSC. -# The sidplay plugin checks this for matching MD5 fingerprints. -# See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq -# -# default_songlength: -# This is the default playing time in seconds for songs not in the -# songlength database, or in case you're not using a database. -# A value of 0 means play indefinitely. -# -# filter: -# Turns the SID filter emulation on or off. -# -#decoder { -# plugin "sidplay" -# songlength_database "/media/C64Music/DOCUMENTS/Songlengths.txt" -# default_songlength "120" -# filter "true" -#} -# -############################################################################### - |