diff options
Diffstat (limited to 'recipes-multimedia/musicpd/mpd')
| -rw-r--r-- | recipes-multimedia/musicpd/mpd/mpd.conf.in | 420 |
1 files changed, 420 insertions, 0 deletions
diff --git a/recipes-multimedia/musicpd/mpd/mpd.conf.in b/recipes-multimedia/musicpd/mpd/mpd.conf.in new file mode 100644 index 000000000..f9f92c98b --- /dev/null +++ b/recipes-multimedia/musicpd/mpd/mpd.conf.in @@ -0,0 +1,420 @@ +# An example configuration file for MPD +# See the mpd.conf man page for a more detailed description of each parameter. + + +# Files and directories ####################################################### +# +# This setting controls the top directory which MPD will search to discover the +# available audio files and add them to the daemon's online database. This +# setting defaults to the XDG directory, otherwise the music directory will be +# be disabled and audio files will only be accepted over ipc socket (using +# file:// protocol) or streaming files over an accepted protocol. +# +music_directory "%music_directory%" +# +# This setting sets the MPD internal playlist directory. The purpose of this +# directory is storage for playlists created by MPD. The server will use +# playlist files not created by the server but only if they are in the MPD +# format. This setting defaults to playlist saving being disabled. +# +playlist_directory "%playlist_directory%" +# +# This setting sets the location of the MPD database. This file is used to +# load the database at server start up and store the database while the +# server is not up. This setting defaults to disabled which will allow +# MPD to accept files over ipc socket (using file:// protocol) or streaming +# files over an accepted protocol. +# +db_file "%db_file%" +# +# These settings are the locations for the daemon log files for the daemon. +# These logs are great for troubleshooting, depending on your log_level +# settings. +# +# The special value "syslog" makes MPD use the local syslog daemon. This +# setting defaults to logging to syslog, otherwise logging is disabled. +# +log_file "%log_file%" +# +# This setting sets the location of the file which stores the process ID +# for use of mpd --kill and some init scripts. This setting is disabled by +# default and the pid file will not be stored. +# +#pid_file "/var/run/mpd/mpd.pid" +# +# This setting sets the location of the file which contains information about +# most variables to get MPD back into the same general shape it was in before +# it was brought down. This setting is disabled by default and the server +# state will be reset on server start up. +# +state_file "%state_file%" +# +# The location of the sticker database. This is a database which +# manages dynamic information attached to songs. +# +#sticker_file "~/.mpd/sticker.sql" +# +############################################################################### + + +# General music daemon options ################################################ +# +# This setting specifies the user that MPD will run as. MPD should never run as +# root and you may use this setting to make MPD change its user ID after +# initialization. This setting is disabled by default and MPD is run as the +# current user. +# +user "mpd" +# +# This setting specifies the group that MPD will run as. If not specified +# primary group of user specified with "user" setting will be used (if set). +# This is useful if MPD needs to be a member of group such as "audio" to +# have permission to use sound card. +# +group "audio" +# +# This setting sets the address for the daemon to listen on. Careful attention +# should be paid if this is assigned to anything other then the default, any. +# This setting can deny access to control of the daemon. +# +# For network +bind_to_address "any" +# +# And for Unix Socket +#bind_to_address "~/.mpd/socket" +# +# This setting is the TCP port that is desired for the daemon to get assigned +# to. +# +#port "6600" +# +# This setting controls the type of information which is logged. Available +# setting arguments are "default", "secure" or "verbose". The "verbose" setting +# argument is recommended for troubleshooting, though can quickly stretch +# available resources on limited hardware storage. +# +#log_level "default" +# +# If you have a problem with your MP3s ending abruptly it is recommended that +# you set this argument to "no" to attempt to fix the problem. If this solves +# the problem, it is highly recommended to fix the MP3 files with vbrfix +# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which +# point gapless MP3 playback can be enabled. +# +#gapless_mp3_playback "yes" +# +# This setting enables MPD to create playlists in a format usable by other +# music players. +# +#save_absolute_paths_in_playlists "no" +# +# This setting defines a list of tag types that will be extracted during the +# audio file discovery process. Optionally, 'comment' can be added to this +# list. +# +#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc" +# +# This setting enables automatic update of MPD's database when files in +# music_directory are changed. +# +#auto_update "yes" +# +# Limit the depth of the directories being watched, 0 means only watch +# the music directory itself. There is no limit by default. +# +#auto_update_depth "3" +# +############################################################################### + + +# Symbolic link behavior ###################################################### +# +# If this setting is set to "yes", MPD will discover audio files by following +# symbolic links outside of the configured music_directory. +# +#follow_outside_symlinks "yes" +# +# If this setting is set to "yes", MPD will discover audio files by following +# symbolic links inside of the configured music_directory. +# +#follow_inside_symlinks "yes" +# +############################################################################### + + +# Zeroconf / Avahi Service Discovery ########################################## +# +# If this setting is set to "yes", service information will be published with +# Zeroconf / Avahi. +# +#zeroconf_enabled "yes" +# +# The argument to this setting will be the Zeroconf / Avahi unique name for +# this MPD server on the network. +# +#zeroconf_name "Music Player" +# +############################################################################### + + +# Permissions ################################################################# +# +# If this setting is set, MPD will require password authorization. The password +# can setting can be specified multiple times for different password profiles. +# +#password "password@read,add,control,admin" +# +# This setting specifies the permissions a user has who has not yet logged in. +# +#default_permissions "read,add,control,admin" +# +############################################################################### + + +# Input ####################################################################### +# + +input { + plugin "curl" +# proxy "proxy.isp.com:8080" +# proxy_user "user" +# proxy_password "password" +} + +# +############################################################################### + +# Audio Output ################################################################ +# +# MPD supports various audio output types, as well as playing through multiple +# audio outputs at the same time, through multiple audio_output settings +# blocks. Setting this block is optional, though the server will only attempt +# autodetection for one sound card. +# +# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of +# other audio outputs. +# +# board specific examples ##################################################### +# (feel free to add futher) +# +# gumstix overo (tested with TOBI expansion board) +#audio_output { +# type "alsa" +# name "overo" +# mixer_control "Headset" +# mixer_index "0" +#} +# +# general examples ############################################################ +# +# An example of an ALSA output: +# +#audio_output { +# type "alsa" +# name "My ALSA Device" +## device "hw:0,0" # optional +## format "44100:16:2" # optional +## mixer_type "hardware" # optional +## mixer_device "default" # optional +## mixer_control "PCM" # optional +## mixer_index "0" # optional +#} +# +# An example of an OSS output: +# +#audio_output { +# type "oss" +# name "My OSS Device" +## device "/dev/dsp" # optional +## format "44100:16:2" # optional +## mixer_type "hardware" # optional +## mixer_device "/dev/mixer" # optional +## mixer_control "PCM" # optional +#} +# +# An example of a shout output (for streaming to Icecast): +# +#audio_output { +# type "shout" +# encoding "ogg" # optional +# name "My Shout Stream" +# host "localhost" +# port "8000" +# mount "/mpd.ogg" +# password "hackme" +# quality "5.0" +# bitrate "128" +# format "44100:16:1" +## protocol "icecast2" # optional +## user "source" # optional +## description "My Stream Description" # optional +## genre "jazz" # optional +## public "no" # optional +## timeout "2" # optional +## mixer_type "software" # optional +#} +# +# An example of a recorder output: +# +#audio_output { +# type "recorder" +# name "My recorder" +# encoder "vorbis" # optional, vorbis or lame +# path "/var/lib/mpd/recorder/mpd.ogg" +## quality "5.0" # do not define if bitrate is defined +# bitrate "128" # do not define if quality is defined +# format "44100:16:1" +#} +# +# An example of a httpd output (built-in HTTP streaming server): +# +#audio_output { +# type "httpd" +# name "My HTTP Stream" +# encoder "vorbis" # optional, vorbis or lame +# port "8000" +# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6 +## quality "5.0" # do not define if bitrate is defined +# bitrate "128" # do not define if quality is defined +# format "44100:16:1" +# max_clients "0" # optional 0=no limit +#} +# +# An example of a pulseaudio output (streaming to a remote pulseaudio server) +# +#audio_output { +# type "pulse" +# name "My Pulse Output" +## server "remote_server" # optional +## sink "remote_server_sink" # optional +#} +# +## Example "pipe" output: +# +#audio_output { +# type "pipe" +# name "my pipe" +# command "aplay -f cd 2>/dev/null" +## Or if you're want to use AudioCompress +# command "AudioCompress -m | aplay -f cd 2>/dev/null" +## Or to send raw PCM stream through PCM: +# command "nc example.org 8765" +# format "44100:16:2" +#} +# +## An example of a null output (for no audio output): +# +#audio_output { +# type "null" +# name "My Null Output" +# mixer_type "none" # optional +#} +# +# This setting will change all decoded audio to be converted to the specified +# format before being passed to the audio outputs. By default, this setting is +# disabled. +# +#audio_output_format "44100:16:2" +# +# If MPD has been compiled with libsamplerate support, this setting specifies +# the sample rate converter to use. Possible values can be found in the +# mpd.conf man page or the libsamplerate documentation. By default, this is +# setting is disabled. +# +#samplerate_converter "Fastest Sinc Interpolator" +# +############################################################################### + + +# Normalization automatic volume adjustments ################################## +# +# This setting specifies the type of ReplayGain to use. This setting can have +# the argument "off", "album" or "track". See <http://www.replaygain.org> +# for more details. This setting is off by default. +# +#replaygain "album" +# +# This setting sets the pre-amp used for files that have ReplayGain tags. By +# default this setting is disabled. +# +#replaygain_preamp "0" +# +# This setting enables on-the-fly normalization volume adjustment. This will +# result in the volume of all playing audio to be adjusted so the output has +# equal "loudness". This setting is disabled by default. +# +#volume_normalization "no" +# +############################################################################### + + +# MPD Internal Buffering ###################################################### +# +# This setting adjusts the size of internal decoded audio buffering. Changing +# this may have undesired effects. Don't change this if you don't know what you +# are doing. +# +#audio_buffer_size "2048" +# +# This setting controls the percentage of the buffer which is filled before +# beginning to play. Increasing this reduces the chance of audio file skipping, +# at the cost of increased time prior to audio playback. +# +#buffer_before_play "10%" +# +############################################################################### + + +# Resource Limitations ######################################################## +# +# These settings are various limitations to prevent MPD from using too many +# resources. Generally, these settings should be minimized to prevent security +# risks, depending on the operating resources. +# +#connection_timeout "60" +#max_connections "10" +#max_playlist_length "16384" +#max_command_list_size "2048" +#max_output_buffer_size "8192" +# +############################################################################### + + +# Character Encoding ########################################################## +# +# If file or directory names do not display correctly for your locale then you +# may need to modify this setting. +# +#filesystem_charset "UTF-8" +# +# This setting controls the encoding that ID3v1 tags should be converted from. +# +#id3v1_encoding "ISO-8859-1" +# +############################################################################### + + +# SIDPlay decoder ############################################################# +# +# songlength_database: +# Location of your songlengths file, as distributed with the HVSC. +# The sidplay plugin checks this for matching MD5 fingerprints. +# See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq +# +# default_songlength: +# This is the default playing time in seconds for songs not in the +# songlength database, or in case you're not using a database. +# A value of 0 means play indefinitely. +# +# filter: +# Turns the SID filter emulation on or off. +# +#decoder { +# plugin "sidplay" +# songlength_database "/media/C64Music/DOCUMENTS/Songlengths.txt" +# default_songlength "120" +# filter "true" +#} +# +############################################################################### + |